Aqueous Solutions Of Ionic Liquids Research Articles

Interionic Bonding in Aqueous Phosphonium Ionic Liquid Solutions Exhibiting LCST Behavior with High Phase Separation Temperatures

Interionic Bonding in Aqueous Phosphonium Ionic Liquid Solutions Exhibiting LCST Behavior with High Phase Separation Temperatures

Exploration of Solvation Consequences of Nicotinic Acid (Vitamin B3) Prevailing in Two Significant Aqueous Ionic Liquid Solutions by Physicochemical and Computational Studies

Exploration of Solvation Consequences of Nicotinic Acid (Vitamin B3) Prevailing in Two Significant Aqueous Ionic Liquid Solutions by Physicochemical and Computational Studies

Pretreatment of wastepaper with an aqueous solution of amino acid-derived ionic liquid for biochar production as adsorbent.

The carbonization of lignocellulosic biomass with ionic liquids (ILs) are considered as an advantageous approach for the preparation of carbonaceous materials. The commonly used imidazolium and pyridinium based ILs have drawbacks such as toxicity, resistance to biodegradation, high cost and viscosity. These issues can be mitigated by diluting ILs with water, although excessive water content above 1wt% can reduce the solubility of biomass. This research aims to investigate the potential of pretreating wastepaper with a "fully green" ILs, amino acid-based IL with high water content, followed by pyrolysis without IL, in enhancing the properties of biochar. For this purpose, the paper was treated with an aqueous solution of IL cysteine nitrate ([Cys][NO3]), and the IL was not involved in the pyrolysis process to prevent the formation of secondary gaseous pollutants. The findings revealed that the hemicellulose and mineral filler in the paper were eliminated during pretreatment, leading to higher carbon content but lower oxygen content. As a result, the biochar exhibited micropores of 0.42 cm3g-1 and a specific surface area of 1011.21m2g-1. The biochar demonstrated high adsorption capacities for Cd2+, enrofloxacin, bisphenol A, ciprofloxacin, and tetracycline, with values of 45.20mgg-1, 49.82mgg-1, 49.90mgg-1, 49.88mgg-1, and 49.65mgg-1, respectively. The proposed mechanism for the adsorption of enrofloxacin by the biochar primarily involves physical adsorption such as pore filling and electrostatic interactions, along with chemical adsorption facilitated by graphitic nitrogen.

Performance and mechanism of DL‐alanine ionic liquid shale inhibitor

AbstractShale hydration and expansion during drilling can lead to wellbore instability, sticking, and frequent leakage accidents. To prevent these issues, an ionic liquid (IL) inhibitor solution was synthesized using DL‐alanine and 98% concentrated sulphuric acid as raw materials. The optimum composition and effect of the synthesized inhibitor in oilfield water‐based drilling fluids were evaluated through anti‐expansion, linear expansion rate, water washing resistance, and clay hydration dispersion experiments. The inhibition mechanism was investigated by thermogravimetric analysis, infrared spectroscopy, zeta potential, contact angle, and X‐ray diffraction analysis. The results show that the optimum IL consists of a 1:1 molar ratio of DL‐alanine to concentrated sulphuric acid synthesized under a reaction temperature and time of 70°C and 18 h, respectively. The resulting DL‐alanine IL exhibited the best inhibitory effect on the hydration, dispersion, and expansion of clay at a concentration of 0.5% in aqueous solution, and its linear expansion rate was only 18.49%. After adding a quantitative amount of clay to different concentrations of DL‐alanine IL aqueous solution, the expansion volume of the clay decreased and the water washing resistance significantly improved. These results provide a theoretical basis for improving the safety and efficiency of shale horizontal well drilling operations.

Toward Greater DNA Stability by Leveraging the Proton-Donating Ability of Protic Ionic Liquids.

Deoxyribonucleic acid (DNA) stability is a prerequisite in many applications, ranging from DNA-based vaccines and data storage to gene therapy. However, the strategies to enhance DNA stability are limited, and the underlying mechanisms are poorly understood. Ionic liquids (ILs), molten salts of organic cations and organic/inorganic anions, are showing tremendous prospects in myriads of applications. With a judicious choice of constituent ions, the protic nature of ILs can be tuned. In this work, we investigate the relative stability of full-length genomic DNA in aqueous IL solutions of increasing protic nature. Our experimental measurements show that the protic ionic liquids (PILs) enhance the DNA melting temperature significantly while unaltering its native B-conformation. Molecular dynamics simulations and quantum mechanical calculation results suggest that the intramolecular Watson-Crick H-bonding in DNA remains unaffected and, in addition, the PILs induce stronger H-bonding networks in solution through their ability to make multiple intermolecular H-bonds with the nucleobases and among its constituent ions, thus aiding greater DNA stability. The detailed understanding obtained from this study could bring about the much-awaited breakthrough in improved DNA stability for its sustained use in the aforesaid applications!

Advanced Uranium Removal with Pure, Nonfluorinated Ionic Liquids: Fine-Tuning Hydrophilic and Hydrophobic Properties for Enhanced Selectivity.

Ionic liquids (ILs) have significant potential for eco-friendly extraction of uranium from aqueous solutions, which is critical for nuclear technology, fuel cycle management, and environmental protection. This study examines the impact of the adjustable hydrophobic/hydrophilic properties of ILs on the removal of uranium(VI) (UO22+) from aqueous solutions utilizing both a novel hydrophilic IL (1-butoxyethyl-1-methylmorpholinium butoxyethylphosphite - Mor1-2O4-BOEP) and 1-heptyl-1-methylmorpholinium heptylphosphite (Mor1-7-HP) as an example of a hydrophobic IL with a similar structure. The transfer mechanism of uranyl ions from water to organic or solid phases closely depends on the physicochemical properties of ILs, especially their hydrophobicity. The hydrophobic Mor1-7-HP extracts uranyl via neutral complex formation as UO2(NO3)2-(Mor1-7-HP)2. Conversely, hydrophilic Mor1-2O4-BOEP induced selective precipitation as UO2(NO3)-(BOEP), transferring uranyl to the solid phase. Optimization of the working parameters, in terms of acidity of the aqueous solution and amount of ILs used, allowed the extraction of over 98% of U(VI). The stoichiometry of the organic complex and the precipitate was determined using physicochemical techniques. These tunable H-phosphonate-based ILs have advantages over traditional solvent extraction and conventional ILs, allowing easier handling, improved selectivity, and lower environmental impact. This work advances uranium separation techniques with applications in hydrometallurgy, particularly in the treatment of wastewater and radioactive waste for sustainable uranium recovery.

Unraveling the emulsifying activity of bio-based ionic liquids in the formation and stabilization of oil-in-water emulsions

Bio-based ionic liquids (ILs), especially those derived from fatty acids (FAs) have been considered promising compounds for the agri-food and bioproduct industries, due to their sustainable appeal, possibly low or non-toxic effect and the nutritional value of FAs. However, studies have been mainly focused on the use of ILs as greener solvents. This work investigated the application of ILs derived from FAs and diethanolamine as emulsifiers to form and stabilize oil-in-water emulsions using ultraturrax (PM) and high-pressure homogenization (H). The influence of the IL type obtained from different FAs (stearic or oleic acids), and vegetable oil type (sunflower or olive oil) and concentration (30:70 or 70:30, oil:water phase ratio) on the formation and stabilization of emulsions was evaluated. This study was focused on the zeta potential of IL aqueous solutions in different pH conditions, interfacial tension between vegetable oils and IL aqueous solutions at different concentrations, kinetic stability, droplet size and size distribution, optical microscopy, viscosity profile and rheological behavior of the emulsions. ILs presented highly negative ZP charge (−12.97–−74.81), high emulsifying ability at low concentrations (1 %) and led to emulsions with high kinetic stability (>30 days). The electrostatic stabilization mechanism may predominate over the steric in IL-based emulsions. The stabilization of emulsions with ILs was associated to lower oil droplet size (D3,2 = 0.60–4.09 µm, D4,3 = 0.95–9.91 μm) and emulsion viscosity (4.8 mPa·s-1.13 Pa·s), which were related to the IL molecular structure, oil type and concentration, and process. Emulsions prepared with stearic-based IL and sunflower oil by PM+H presented higher kinetic stability. The proposed ILs are presented as highly effective emulsifiers with potential application in the agri-food, pharmaceutical and cosmetic industries.

Dissolution and regeneration of starch in hydroxyl-functionalized ionic liquid aqueous solution

There have been continuous quests for suitable solvents for starch, given the importance of effective starch dissolution in its modification and subsequent materials production. In light of this, the potential of hydroxyl-functionalized ionic liquid (IL) as a promising solvent for starch was investigated. Within this study, a hydroxyl-functionalized IL 1-(2,3-dihydroxypropyl)-3-methylimidazole chloride ([Dhpmim][Cl]) was synthesized, and the dissolution of starch in this IL and its aqueous solutions was examined. Starch (5.35 wt%) was completely dissolved in [Dhpmim][Cl] within 2 h at 100 °C. The solubility of starch in [Dhpmim][Cl]-water mixtures initially increased and then decreased with rising water content. The optimal ratio was found to be 1:9 (wt/wt) water:[Dhpmim][Cl], achieving the highest solubility at 9.28 wt%. Density functional theory (DFT) simulations elucidated the possible interactions between starch and solvents. After dissolution and regeneration in the 1:9 water:[Dhpmim][Cl] mixture, starch showed no discernible change in the molecular structure, with no derivatization reaction observed. Regenerated starch exhibited a transformation in crystalline structure from A-type to V-type, and its relative crystallinity (12.4 %) was lower than that of native starch (25.2 %), resulting in decreased thermal stability. This study suggests that the hydroxyl-functionalized IL, [Dhpmim][Cl], and its aqueous solutions serve as effective solvents for starch dissolution.

Efficient Extraction of Sericin Protein from Mulberry and Non‐Mulberry Silk Fibers: Utilizing Aqueous Ionic Liquid Solutions as Green Solvents

AbstractProtein extraction from silk is a unique area of research and the foremost need is the efficient extraction of the silk proteins namely fibroin and sericin from the silk fibres, which is conventionally done using chemicals. In this work, we show that Ionic liquids (ILs) can be employed as a green and alternative method for degumming sericin from both mulberry (B. mori) and non‐mulberry (A. assamensis and P. ricini) silk. Six different ILs with varying tail lengths were studied for their degumming efficiencies. The interaction between silk proteins and IL ions involves a complex ionic disruption of hydrogen bonds, non‐polar interactions, and electrostatic effects. We have found that 1‐Butyl‐3‐methylimidazolium chloride (BMIM.Cl), 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIM.BF4) and Tetraethylammonium bromide (TEAB) bring in higher weight loss % in silk fibres compared to other ILs, indicating that it can be used in better sericin removal without significant damage to the silk fibre. TEAB emerged as a potential candidate for sericin extraction due to its promotion of protein destabilization. Additionally, no drastic changes in the structure of the extracted silk protein sericin were observed, as evident from the FTIR spectra and SEM images. This work highlights for the first time, the use of ILs for extraction of non‐mulberry silk sericin and also proves that ILs can be a potential green solvent for sericin extraction.

A novel synergistic intensification method for CO2 absorption by metal salt and task-specific ionic liquids hybrid solvent in microchannel reactor

A novel metal salt-promoting mass transfer intensification method for CO2 absorption into task-specific ionic liquids aqueous solution was proposed. The mass transfer intensification and intrinsic mechanisms of different concentrations of metal salts (NaBF4, KBF4, KCl, and CuCl2) with task-specific ionic liquids (1-aminopropyl-3-methylimidazolium tetrafluoroborate [Apmim] [BF4]) aqueous solutions for CO2 capture process were visually investigated using a microchannel reactor. The results showed that adding metal salts could remarkably enhance the interaction between metal cations and ionic liquid anions, thereby decreasing the interaction between anions and cations within the ionic liquid molecules and promoting the chemical reaction between ionic liquid cations and CO2. Under the condition of the same salt concentration, the addition of KBF4 has more obvious enhancement for mass transfer in CO2 absorption process. The mass transfer coefficient increases as the gas-liquid phase flow rate rise under slug flow condition. In addition, based on the effects of metal salt concentration, absorbent density, and gas-liquid phase flow rate on the CO2 volumetric mass transfer coefficient kLa, a new correlation for predicting the volumetric mass transfer coefficient of CO2 absorption into the hybrid solvent in microchannel reactor was proposed and validated.

Capacity of Aqueous Solutions of the Ionic Liquid 1-Ethyl-3-methylimidazolium Acetate to Partially Depolymerize Lignin at Ambient Temperature and Pressure.

Lignin is a very attractive and abundant biopolymer with the potential to be a biorenewable source of a large number of value-added organic chemicals. The current state-of-the-art methods fail to provide efficient valorization of lignin in this regard without the involvement of harsh conditions and auxiliary substances that compromise the overall sustainability of the proposed processes. Making an original approach from the set of mildest temperature and pressure conditions, this work identifies and explores the capacity of an aqueous solution of the nonvolatile ionic liquid 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) to partially depolymerize technical lignin (Indulin AT) by means of a treatment consisting in the simple contact at ambient temperature and pressure. Among a considerable number of valuable phenolic molecules that were identified in the resulting fluid, vanillin (yield of about 3 g/kg) and guaiacol (yield of about 1 g/kg) were the monophenolic compounds obtained in a higher concentration. The properties of the post-treatment solids recovered remain similar to those of the original lignin, although with a relatively lower abundance of guaiacyl units (in agreement with the generation of guaiacyl-derived phenolic molecules, such as vanillin and guaiacol). The assistance of the treatment with UV irradiation in the presence of nanoparticle catalysts does not lead to an improvement in the yields of phenolic compounds.

Enhanced Antimalarial Activity of Extracts of Artemisia annua L. Achieved with Aqueous Solutions of Salicylate Salts and Ionic Liquids.

Artemisinin, a drug used to treat malaria, can be chemically synthesized or extracted from Artemisia annua L. However, the extraction method for artemisinin from biomass needs to be more sustainable while maintaining or enhancing its bioactivity. This work investigates the use of aqueous solutions of salts and ionic liquids with hydrotropic properties as alternative solvents for artemisinin extraction from Artemisia annua L. Among the investigated solvents, aqueous solutions of cholinium salicylate and sodium salicylate were found to be the most promising. To optimize the extraction process, a response surface method was further applied, in which the extraction time, hydrotrope concentration, and temperature were optimized. The optimized conditions resulted in extraction yields of up to 6.50 and 6.44 mg·g-1, obtained with aqueous solutions of sodium salicylate and cholinium salicylate, respectively. The extracts obtained were tested for their antimalarial activity, showing a higher efficacy against the Plasmodium falciparum strain compared with pure (synthetic) artemisinin or extracts obtained with conventional organic solvents. Characterization of the extracts revealed the presence of artemisinin together with other compounds, such as artemitin, chrysosplenol D, arteannuin B, and arteannuin J. These compounds act synergistically with artemisinin and enhance the antimalarial activity of the obtained extracts. Given the growing concern about artemisinin resistance, the results here obtained pave the way for the development of sustainable and biobased antimalarial drugs.

Study the effect of L-arginine and L-tyrosine on the surface adsorption and micellar properties of long-chain imidazolium-based ionic liquid

The interfacial and bulk properties of the aqueous solutions of the long chain imidazolium-based ionic liquid (IL) viz. 1-decyl-3-methylimidazolium tetrafluoro borate [Dmim][BF4] within L-Arginine and L-Tyrosine have been investigated by surface tension, UV–Visible, fluorescence, viscosity, and FTIR spectroscopy. The surface activity of the [Dmim][BF4]-L-Try was more active on the surface than the [Dmim][BF4]-L-Arg. It's noteworthy to notice that the CMC values of [Dmim][BF4] in water and aqueous amino acids obtained by the UV–Vis spectroscopy method are the same as those determined using the surface tension approach. The additions of AAs function to minimize the CMC values of [Dmim][BF4] as well as the interfacial parameters. An IR probe and the v(C-N) region, which is sensitive to the microenvironment, are used to determine the structure and hydrogen-bonding properties of the IL and two amino acids, specifically the L-Arginine and L-Tyrosine binary systems. The excess IR spectra of the v(C-N) region exhibit positive peaks, which show that the mixing process was insufficient and that complexes with hydrogen bonds had formed in the mixes. The findings could be applied in the pharmaceutical industry to stabilize proteins and prevent protein aggregation.

Hydration water and ionic aggregation in aqueous solutions of imidazolium-based protic ionic liquids

Water molecules, present as additive or as contaminant of Protic Ionic Liquids (PILs), can compete for the hydrogen bond sites leading to important modifications of the local order of these liquids and to the modulation of their physical–chemical properties. In this work, aqueous solutions of a set of N-methylimidazolium-based PILs [MIM][X] (X = NO3−, TfO−, HSO4−, and Cl−) were investigated by deep UV Resonance Raman (UVRR) spectroscopy in the water-rich domain where ionic aggregates and bulk-like water coexist. A differential method was used to analyze the OH stretching profile to extract the so-called solute-correlated (SC) spectrum, which is particular informative of the hydration features of the PILs. Moreover, specific bands of the cation, sensitive to the hydrogen bonding, were comparatively investigated. The progressive evolution from solvent-separated ion pairs (SIP) and/or solvent-shared ion pairs (SSIP) to contact ion pairs (CIP) and/or larger ionic aggregates can be monitored as a function of the hydration level, in the water-rich domain. Our approach showed that, in the high-diluted regime, the hydration environment around the [MIM] cation does not depend on the type of anion. Moreover, [MIM][NO3] and [MIM][TfO] showed cation-water (ionic) H-bonds at the NH site stronger than the cation–anion (double-ionic) ones. The analysis of SC Raman spectra points out the formation of cation–anion H-bonds (through the CH ring groups), stronger than cation-water ones, upon PILs concentration increase, especially evident in the case of [MIM][Cl]. The H-bond strength between the anion and hydration water is found to decrease following the order: [Cl] ∼ [HSO4] > [NO3] > [TfO]. Chloride ions tend to perturb a larger number of water molecules than the other anions. The number of perturbed water molecules decreases at increasing PIL concentration, showing a larger dependence for [MIM][Cl], consistently with its larger propensity to form ionic aggregates. The unique response of [MIM][Cl] to hydration found by analyzing SC-UVRR data is related to the synergy of different factors such as the anion reduced size (higher charge density), spherical symmetry, and high H-bond basicity.

An Electrochemical Description of 1-Alkyl-3-Methyimidazolium Chloride Ionic Liquids

Three common Ionic Liquids (ILs) were selected 1-Methylimidazolium chloride ([Hmim]Cl), 1-Butyl-3-methylimidazolium chloride ([Bmim]Cl) and 1-Octyl-3-methylimidazolium chloride ([Omim]Cl) for investigation to explore the effects of alkyl chain length and cation protonation on corrosion rate. The aqueous IL solutions have demonstrated a range of identifiably distinct behaviours as a function of changing solution concentration in the range of 70-99.5 mol% water. These behaviours are evidenced by large changes in conductivity, density, and viscosity; these are measurable properties indicating an evolution of hydrogen bonding networks in these systems. These bulk solution properties are critical to the interaction with a metal surface; this was explored using electrochemical testing with Cu and Zn working electrodes. Herein, the focus will be on the use of cyclic voltammetry (at 75 mol%, 85 mol%, 97 mol% and 99.5 mol% water in IL) to describe metal dissolution, deposition, and hydrogen evolution in ILs. The system of equations implemented, to interpret the electrochemical data obtained, have wide-reaching implications in understanding the fundamental behaviours causing observed corrosion behaviours; additionally, the prediction of IL solution conductivity, a vital property for applications of ILs, is of significant value.A kinetic analysis of these solution systems are benefited by the simplicity of the system with no bulk electrolyte, i.e. only the two components: water and IL. Ohmic migration in the bulk and discharge on electrode surface are the two contributions which need to be considered in the Butler-Volmer equation. (n.b. A limitation in the treatment is that thus far no account is taken for the process of solid deposition via a nucleation stage.) In this approximation the following equations can be derived. Each discharging particle must pass two consecutive processes: (1) migration in the field, with characteristic time τohm, and (2) discharge, with the time τBV. The total time will be τtot = τohm + τBV, where τohm -1 = kohm and τBV -1 = kBV. Expressions for Icathodicscan and Ianodicscan results, where φ =E-Ec , for which Ec is the potential at zero current. Two examples are included (Figure 1) to highlight the performance of the models with experimental data. The first case illustrates a particularly good agreement with a cyclic voltammogram experimentally measured for a Cu working electrode in an aqueous-IL solution, the second case is included to demonstrate that the characterstic reversal (near I=0) can be produced. Some deviation, particularly at high current, is likely due to capacitive current. The fitting also gives conductivity, which can be compared and shows good agreement with independent experimental measurements. As such, this successful prediction of the electrochemical behaviours provides an important step in the utilisation of cyclic voltammetry as a method for delivering insight into these two-component IL-containing solutions systems through fundamentally derived expressions. Figure 1

Conformational Properties of Aβ Peptide Oligomers in Aqueous Ionic Liquid Solution: Insights from Molecular Simulation Studies.

Alzheimer's disease is a progressive irreversible neurological disorder with abnormal extracellular deposition of amyloid β (Aβ) peptides in the brain. We have carried out atomistic molecular dynamics simulations to investigate the size-dependent conformational properties of aggregated Aβ oligomers of different orders, namely, pentamer [O(5)], decamer [O(10)], and hexadecamer [O(16)] in aqueous solutions containing the ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]). The calculations revealed reduced peptide conformational fluctuations in O(5) and O(10) in the presence of the IL. In contrast, the higher order oligomer [O(16)] has been found to exhibit greater structural distortion due to enhanced flexibilities of its peptide units in the presence of the IL. Based on the distributions of the solvent (water) and the cosolvent (IL) components, it is demonstrated that exchange of water by the IL ion pairs at the exterior surface of the oligomers primarily occurs beyond the first layer of surface-bound water molecules. Importantly, a reduced number of relatively weaker peptide salt bridges have been found in O(16) in binary water-IL solution as compared to the other two smaller-sized oligomers [O(5) and O(10)]. Such differential influence of the IL on peptide salt bridges results in less favorable binding free energies of peptide monomers to O(16), which leads to its greater structural distortion and reduced stability compared to those of O(5) and O(10).

Scaled water sigma potential as a descriptor of LCST and UCST behavior in aqueous ionic liquid solutions

This study introduces the scaled sigma potential of water (σr), a new metric using the COSMO-RS (Conductor like Screening Model for Real Solvents) framework, as a descriptor of upper and lower critical solution temperature (UCST and LCST) governed phase separation in aqueous ionic liquid (IL) solutions. The maximum and minimum values of σr correspond to the homogenous and phase separated states, at a given composition, for both UCST and LCST cases. Furthermore, the value of σr changes from positive to negative as the temperature increases in LCST exhibiting solutions, while as the temperature increases in UCST exhibiting solutions, the value of σr changes from negative to positive. Therefore, σr provides a less computationally intensive alternate to Gibbs free energy calculations and to the generation of phase diagrams for assessing UCST/LCST behavior in aqueous IL solutions.

The role of hydrogen bonding in solubilizing camptothecin in hydrophilic and hydrophobic ionic liquids

Utilizing ionic liquid (IL)-water mixtures as selective extraction solvents for raw materials from natural sources represents an efficacious approach; however, elucidating the underlying mechanisms inherent in various types of IL-aqueous solutions continues to pose a significant challenge. In this study, molecular dynamics simulations and density functional theory calculations are employed to illuminate the influence of the functional anion within ILs and the water content on the solvation mechanism and phase separation phenomena observed during the extraction of camptothecin (CPT) using aqueous IL solutions. The simulation results show that the anions in ILs preferentially dissolve CPT through hydrogen bonding at low water concentrations. As the water concentration increases, the hydrophobic IL binds more tightly to CPT, enabling the water to self-aggregate. The anions in hydrophilic IL form hydrogen bonds with water instead, further enhancing the dissolution of CPT. This work reveals the mechanism of phase separation and solvation of different types of IL aqueous solutions, which is helpful in developing new drug extraction and purification technologies.

Sustainable approach to recover β-carotene and astaxanthin from Phaffia rhodozyma grown in a stirred-tank bioreactor under the influence of magnetic fields

This study aimed to produce carotenoids by Phaffia rhodozyma in a stirred-tank bioreactor under the influence of magnetic fields (MF) and to evaluate a sustainable approach to recover them from the yeast biomass. MF application proved to be effective in increasing 8.6 and 22.9 % of β-carotene and astaxanthin production, respectively. Regarding solid–liquid extraction (SLE), the ability of aqueous and ethanolic solutions of protic ionic liquids (PILs) was determined. β-carotene and astaxanthin recovery yields increased with the anion alkyl chain length hydrophobicity. [Pro][Oct]:EtOH (50 % v v-1) was selected as the effective solvent. Moreover, it led to improvement in carotenoid stability at different storage temperatures over time in comparison with the control. This study is one of the first to describe an effective and sustainable approach to move carotenoid production from shake flasks to a bioreactor under the influence of MF and recover carotenoids from P. rhodozyma biomass.

Volumetric and UV–Visible Spectroscopic Evaluation of Interactions between Thiamine Hydrochloride and Protic Ionic Liquids in Aqueous Solutions

Volumetric and UV–Visible Spectroscopic Evaluation of Interactions between Thiamine Hydrochloride and Protic Ionic Liquids in Aqueous Solutions