Microwave Absorption Applications Research Articles

Revealing electrostatic-manipulated self-assembly mechanism helps to readily design enhanced MOF-derived microwave absorbers

The controllable self-assembly of Metal Organic Frameworks (MOFs) crystals plays a vital role in modulating the performance for microwave absorbers. However, most current strategies require colloidal or intricate chemical modifications of nanoparticles, thereby increasing the complexity of structural construction and impeding the broader application of microwave absorbers. To resolve this tough issue, we herein innovatively propose a more easily achievable electrostatic-manipulated self-assembly strategy. By readily manipulating the electrostatic adsorption and repulsion between particles, the aggregation and growth sites of initial MOF crystals are anchored, hence facilitating to the construction of solid-core/shell and hollow porous microstructures for absorbers. The substantial improvement depending on electrostatic effects is clearly observed in experimental results. It demonstrates that the Co@hollow N-doped carbon spheres (Co@HNCSs) absorber, induced by electrostatic repulsion, shows the best overall absorption performance, with a strong absorption of −65.4 dB at a thickness of 1.9 mm and an effective absorption bandwidth (EAB) of 5.4 GHz at a thickness of 1.6 mm, covering almost the entire Ku band. The influence of these strategies on the electromagnetic response mechanisms is further comprehensively discussed. Accordingly, we believe this strategy offers new insights for the MOFs’ structural absorbers via electrostatic-manipulated self-assembly strategy.

Rietveld refined structural, elastic, XPS, and dielectric evaluations of Zn-doped Cd–Mg spinel ferrites for high-frequency applications

Sol-gel auto ignition route was utilized to synthesize a series of Zn-doped Cd–Mg spinel ferrites with composition Cd0.5-xMg0.5ZnxFe2O4 (x = 0.0, 0.1, 0.2, and 0.3). All of the prepared nanomaterials that were annealed for 4 h at 900 °C had a cubic structure and were spinel, according to X-ray diffraction studies. The lattice constant decreased as the Zn concentration increased. This is because of the substituent's lower radii. The W–H plot, Size strain plot, and Sherrer Formula were used to calculate the crystallite size, which was in the range of a nanometer. Vibrational spectroscopy studies have also shown that M − O bonds are present in every processed sample and that a spinel cubic structure has formed. Additionally, the cationic distribution and cubic spinel structure were validated by Rietveld refinement of the XRD data. The analysis using X-ray photoelectron spectroscopy (XPS) has confirmed the presence of all metal ions in their respective electronic states. The dielectric characteristics in the 1 MHz-6 GHz range of frequencies were ascertained using an impedance analyzer. Jonscher's power law validated the conduction mechanism in the synthesized ferrite samples. The relaxation time constant calculated from impedance Cole-Cole plots shows that the conduction in all the synthesized nanomaterials was due to the grains rather than the grain boundaries. The minimum reflection loss of −36.54 dB was achieved for Zn-doped Cd–Mg ferrites at x = 0.3. The prepared Zn-doped Cd–Mg spinel ferrites would be an excellent material for high-frequency microwave absorption applications.

Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone.

Polyvinylpyrrolidone (PVP) is a synthetic polymer that holds significance in various fields such as biomedical, medical, and electronics, due to its biocompatibility and exceptional dielectric properties. Electrospinning is the most commonly used tool to fabricate fibers because of its convenience and the wide choice of parameter optimization. Various parameters, including solution molarity, flow rate, voltage, needle gauge, and needle-to-collector distance, can be optimized to obtain the desired morphology of the fibers. Although PVP is commercially available in various molecular weights, PVP with a molecular weight of 130,000 g/mol is generally considered to be the easiest PVP to fabricate fibers with minimal challenges. However, the fiber diameter in this case is usually in the micron regime, which limits the utilization of PVP fibers in fields that require fiber diameters in the nano regime. Generally, PVP with a lower molecular weight, such as 10,000 g/mol and 55,000 g/mol, is known to present challenges in fiber preparation. In the current study, parameter optimization for PVP possessing molecular weights of 10,000 g/mol and 55,000 g/mol was carried out to obtain nanofibers. The electrospinning technique was utilized for fiber fabrication by optimizing the above-mentioned parameters. SEM analysis was performed to analyze the fiber morphology, and quantitative analysis was performed to correlate the effect of parameters on the fiber morphology. This research study will lead to various applications, such as drug encapsulation for sustained drug release and nanoparticles/nanotubes encapsulation for microwave absorption applications.

Superparamagnetic nanocubes of Co and Cu co-doped Mn-based ferrites as microwave absorbing material

The requirement in resolving electromagnetic (EM) problems in stealth warhead technologies are excellent absorption ability, lightweight, and thin dimensions. In this direction, this study provides a straightforward hydrothermal one-pot method to synthesize superparamagnetic Mn-based ferrite co-doped with Co and Cu (MCCF), and the article presents its microwave absorption properties. Using cutting-edge techniques, the MCCF nanocomposite phase structure, morphological, superparamagnetic, and microwave absorption properties were measured and analyzed. MCCF-822 ferrite shows superparamagnetic properties simultaneously with a high Ms value 71.4 emu/g. Vector network analysis of MCCF-822 with 70 wt% loading demonstrates an effective absorption bandwidth (EAB) of 5.2 GHz with a maximum reflection loss (RLmax) of −19.2 dB at 2 mm thickness, and it spans almost 92.77 % frequency region (3.3–18 GHz range with RL < −10 dB) by varying thickness 1.7 mm–6 mm. At 60 wt% loading, it covers the whole X & Ku band with a thickness range from 2 to 9 mm with a good EAB of 4.3 GHz at 2.5 mm thickness with RLmax of −16 dB. The dual absorption bands are also present in MCCF-613, which increases the EAB with RLmax −52.99 dB at 9 mm, fulfilling the superparamagnetic properties. Thus, MCCF-822 is proposed as a cost-effective superior ferrite nanocomposite for microwave absorption applications.

Core-shell PCIP/NiFe2O4/PANI composite: Preparation, characterization, and applications in microwave absorption

Narrow absorption bandwidth is a common problem faced by current electromagnetic wave absorbing materials. Herein, a porous carbonyl iron/NiFe2O4/polyaniline-based wave absorbing composite material with wideband microwave absorption performance was designed by metal pitting technique, co-precipitation and in-situ polymerization. The results of SEM, XPD and XPS show that PCIP/NiFe2O4/PANI nanostructures were successfully synthesized. It is found that NiFe2O4/PANI agglomeration on the PCIP surface significantly enhances the electric loss capability of the composites. When the amount of PANI is 0.7 mL, the composite exhibits broad and strong absorbing properties, and a minimum reflection loss of −45.45 dB is obtained at 2.0 mm. The effective absorption bandwidth reaches 7.5 GHz when the matching thickness is only 2.0 mm. The synergistic effect of multiple absorbing mechanisms such as dipole polarization, interface polarization, conduction loss, natural resonance, exchange resonance and eddy current loss enables it to exhibit good wave absorption performance.

CoNi/MXene@CoNi/MXene microsphere/silicone rubber multilayered composites for ultra-broadband microwave absorption

2D transition metal carbide/nitride (MXene) nanomaterials have prospective applications in high-performance microwave absorption (MA). However, the excessively high permittivity, absence of magnetic loss, and susceptible oxidizability of MXene severely hinder the enhancement of its MA properties. Here, we used a facile organic solution–phase thermal decomposition method to prepare dielectric–magnetic MXene@CoNi nanocomposites with heterojunctions, which can effectively prevent the oxidation of MXene. Subsequently, the MXene@CoNi nanocomposites were integrated with magnetic CoNi alloys, MXene microspheres (MXene MPs), and a silicon rubber (SR) matrix to construct multilayered CoNi/MXene@CoNi/MXene MPs/SR composites by casting and curing. Benefiting from the multilayered structure and complementary effects of the dielectric and magnetic components, the multilayered CoNi/MXene@CoNi/MXene MPs/SR composites composed of matching, absorbing, and reflective layers showed a remarkable minimum reflection loss of −53.3 dB and an ultra-broad effective absorption bandwidth up to 11.12 GHz at a thickness of 2.96 mm. These results demonstrated the developed multilayered composites are promising candidates for high-performance MA. Our study provides new insights into the development of ultra-broadband MXene-based absorbent materials.

Estimation of reflection loss of lossy dielectric powders using coaxial line based guided wave technique for conventional cement based microwave absorber applications

Coaxial transmission line technique to determine Plane Wave Reflection Loss of dielectric powders is proposed. The technique provides rapid determination of suitability of powders as conductive filler for Microwave Absorbers, specifically cement based Absorber. Ash by-product from steel industry including Argon Oxygen Decarburization (AOD), Acid Recovery Station (ARS) and Electric Arc Furnace (EAF) are considered over frequency range 1–12 GHz. Scattering parameters (S-matrix) of ash filled coaxial lines are measured. Short-Open technique is adopted. Formulation to compute reflection loss from measured S11 is presented. Teflon, with known reflection loss, is considered for validation. A 10 % error in computed results is observed in range 1–4 GHz, and 10–15 % in range 4–12 GHz. Broadband MAM characterization employing Free Space Methods involve enormous material requirement, frequency dependent prototype dimensions and anechoic chambers. The error percentage notwithstanding, the technique provides rapid estimates, enabling smart selection of conductive fillers, providing cost and time reduction.

Synthesis, electricaland structural characterization of a composite material based on powdered magnetite and high density polyethylene

Garzón Posada A.O., F.E. Fajardo Tolosa, D.A. Landínez Téllez, J. Roa-Rojas, G. Peña Rodríguez. Synthesis, electrical and structural characterization of a composite material based on powdered magnetite and high density polyethylene. Rev. Acad. Colomb. Cienc., 37 (1): 55-59, 2013. ISSN 0370-3908. This work describes the synthesis and characterization of a composite material based on magnetite filled HDPE, which is comrnonly known for its magnetic properties. Composites of this kind are used in different applica­tions such as magnetic and microwave absorption, transducers manufacturing, and biomedical applications like targeted drug delivery, organs tagging, etc. The samples were produced according to different volume ratios of magnetite and HDPE. The samples structure was analyzed through X-ray diffraction tests and the crystallinity degree was calculated. Then, the samples were electrically characterized through volume resistivity measure­ments. The results showed that for ratios less than the 20% of magnetite there is not a substantial reduction in the resistivity ofthe composite compared to the unfilled HDPE. For magnetite ratios above the 30% the com­posite shows a substantial reduction of six orders of magnitude in its electrical resistivity.

EVA copolymer loaded with PAni/CNT/GNP hybrids: A flexible and lightweight material with high microwave absorption

AbstractMicrowave‐absorbing materials are widely used for electromagnetic interference shielding and stealth technology. However, most existing materials are heavy, rigid, and expensive, limiting their practical applications. Therefore, there is a need to develop new materials that are flexible, lightweight, and cost effective. This study aimed to synthesize and characterize a novel ternary composite material based on polyaniline (PAni), carbon nanotubes (CNTs), and graphene nanoplatelets (GNPs) in an ethylene‐vinyl acetate (EVA) copolymer matrix. PAni‐based ternary composites were prepared by in situ polymerization of aniline in toluene dispersion of CNT/GNP hybrids and EVA. The microwave absorption properties were evaluated using a vector network analyzer in the frequency range of 8.2–18 GHz. The presence of as little as 0.8 wt% of CNT/GNP hybrid with appropriate mass ratio increased the conductivity by more than four orders of magnitude compared to the EVA@PAni blend. The minimum reflection loss corresponded to −40.55 dB at 16.31 GHz for the system containing CNT/GNP = 0.3:0.7, whereas those with CNT/GNP = 0.0:1.0 and 0.7:0.3 presented the widest effective absorption bandwidths (RL &lt; −10 dB), covering almost the entire Ku‐band. Due to the excellent flexibility, low weight, and high microwave absorption performance, these composites are potential candidates for microwave absorption applications.

Core-shell designed high entropy alloy CoNiFeCuV-C nanoparticles for enhanced microwave absorption

The widespread interest in high entropy alloy nanostructures stems from their potential utilization in a variety of technological and scientific fields. This study presents an innovative approach employing a one-step metal organic chemical vapor deposition to synthesize quinary high entropy alloy (CoNiFeCuV-C) core-shell nanoparticles designed for microwave absorption applications. Superior microwave absorption performance is attained through the optimization of conduction loss via thermal treatment, coupled with the interfacial polarization across the interfaces between CoNiFeCuV cores and C shell. The paraffin composite filled with an optimal 20% content of CoNiFeCuV-C core-shell nanoparticles demonstrates a minimal reflection loss (RLmin) of −51.8 dB at 13.76 GHz, achieving this performance with a thickness of 2.2 mm. Moreover, the absorbing bandwidth spans 7.44 GHz at a thickness of 2.4 mm. The outstanding accomplishments underscore the potential of utilizing CoNiFeCuV-C core-shell nanoparticles as a promising choice for lightweight, effective microwave absorber material.

3D printed honeycomb bilayer structures based on polylactic acid as lightweight microwave absorbing materials

Abstract3D printed honeycomb structures constituted by neat polylactic acid (PLA) and conductive PLA (PLAc) with different cell sizes and thicknesses were manufactured through 3D printing technology based on material extrusion (MEX). These structures were arranged into bi‐layer honeycomb structures (BHS) for evaluation of the microwave absorbing properties at the X‐band (8.2–12.4 GHz) and Ku‐band (12.4–18 GHz) frequency ranges. The effects of cell size, sample thickness, layer thickness ratio and the nature of the top layer on the electromagnetic attenuation performance of BHS samples were investigated in terms of reflection loss (RL). The components geometric characteristics and the arrangement of the layers exerted great influence on the RL values and effective absorption bandwidth (EAB). Overall the bilayer structures with 5 mm total thickness presented the best EM response in terms of EAB and minimum RL, where the component with the larger cell size (7.7 mm), PLAc (1 mm) as the top layer and PLA (4 mm) as the bottom layer exhibited the best results with RL values of −41 dB and EAB of 9.5 GHz. The BHS system with 7.7 mm cell size was more efficient in Ku band frequency range, whereas that with 3.5 mm cell size gave better response in the X‐band frequency range. Therefore, RL values and EAB can be adjustable by modifying the building strategy of the printed parts, such as thickness of the sample, cell size and thickness distribution of the conductive and non‐conductive layers. The findings in this work show the importance of the building strategy to fabricate components with controllable BHS and improved properties for microwave absorption application.

Hybrid Foams based on Multi‐Walled Carbon Nanotubes and Cellulose Nanocrystals for Anisotropic Electromagnetic Shielding and Heat Transport

AbstractLightweight and mechanically robust hybrid foams based on cellulose nanocrystals (CNC) and multi‐walled carbon nanotubes (MWCNT) with an anisotropic structure are prepared by directional ice‐templating. The anisotropic hybrid CNC‐MWCNT foams displayed a combination of highly anisotropic thermal conductivity and an orientation‐dependent electromagnetic interference (EMI) shielding with a maximum EMI shielding efficiency (EMI‐SE) of 41–48 dB between 8 and 12 GHz for the hybrid foam with 22 wt% MWCNT. The EMI‐SE is dominated by absorption (SEA) which is important for microwave absorber applications. Modelling of the low radial thermal conductivity highlighted the importance of phonon scattering at the heterogeneous CNC‐MWCNT interfaces while the axial thermal conductivity is dominated by the solid conduction along the aligned rod‐like particles. The lightweight CNC‐MWCNT foams combination of an anisotropic thermal conductivity and EMI shielding efficiency is unusual and can be useful for directional heat transport and EMI shielding.

Strong microwave absorption performance of simply grinding FAPbI3/CNTs composite absorbers

The distinctive physical and chemical characteristics of organic-inorganic lead halide perovskite make it a promising candidate for microwave absorption applications. However, the high-efficiency microwave absorption of halide perovskite-based composites is concentrated at high frequencies, while electronic equipment operates at low-frequency bands. Exploring simple and efficient methods to achieve optimal microwave absorption efficiency at low frequencies continues to pose a considerable challenge. Here, FAPbI3 was synthesized by a simple solvent-free hand grinding method and mixed with carbon nanotubes (CNTs) to obtain a series of FAPbI3/CNTs (FC) composites. By modulating the mass ratio of the components, FAPbI3 modulates the absorption bands, CNTs can effectively establish a conductive network to enhance both polarization loss and conductive loss and regulate impedance matching. The lower permittivity of FAPbI3 gives FC an advantage in terms of low-frequency microwave absorption. The FC-4 composite exhibits a minimum reflection loss (RLmin) of −55.67 dB at a low frequency of 6.88 GHz with a thickness of 3.5 mm. Meanwhile, microwave absorption performance can reach 99 % covering almost the entire C band when utilizing a thickness ranging from 3 to 5 mm. Additionally, according to adjusting the load of FAPbI3 in the mixture, the FC-3 composite displays the highest microwave absorption value among the composites based on halide perovskites. With a thickness of 1.4 mm, the reflection loss at 17.4 GHz reaches an impressive minimum value of −71.89 dB. This study represents the first research specifically focused on FAPbI3 perovskite in the domain of microwave absorption. FC composites display remarkable capabilities in absorbing microwaves, indicating their promising prospects for advancement within the realm of microwave absorption. This research may provide valuable insights for the design of low-frequency and high-efficiency microwave absorbers.

Design and tuneable magnetodielectric ferrite-based meta-absorbers for high-frequency microwave absorption applications

EM absorbers with outstanding absorption, shielding capability, and dissipation performance are still challenging in hostile environments. To address the EMI issues, the meta-absorbers of the spinel-based structure were designed and prepared. Herein, Zr-In co-substituted Ni-Zn nano ferrites with the composition of Ni0.7Zn0.3(ZrIn)xFe2–2xO4 for 0≤x≤0.20 with 0.05 step size were prepared using the citrate-gel self-ignition route. The characteristic features of the Zr-In doped NiZn nano ferrites were evaluated from FESEM, XRD, FTIR, and VSM, respectively. The bond lengths and unshared-shared edges in Zr-In doped NiZn ferrite were estimated using the Bertaut method. FTIR analysis confirms the occurrence of phase in Zr-In co-substituted Ni-Zn ferrite. The micrographs of Zr-In doped NiZn ferrite show circular and hexagonal mixed-shaped particles. SFD and high-frequency response from the Zr-In doped NiZn ferrites were evaluated. NiZn ferrite shows higher SFD at the high-frequency response than Zr-In doped NiZn ferrite. The dielectric measurements were captured using VNA in the frequency range from 1 GHz to 6 GHz. The minimum reflection loss of -61.5 dB at 2.43 GHz was observed for the x = 0.20 sample. However, the reflection loss of -57.3 dB at 1.93 GHz was achieved for the x = 0.15 sample. Metaabsorbers of rod-like Zr-In doped NiZn were designed and simulated. The absorption resonance peak was observed at 5.8 GHz with maximum absorptivity for Zr-In doped NiZn absorber at x = 0.15, respectively. The present study reveals the planer and rod-like prepared EM irradiated Zr-In doped NiZn meta-absorber are suitable for SFD, MLCI's high-frequency EMI shielding applications in C band applications.

Effects of different atomic passivation on conductive and dielectric properties of silicon carbide nanowires

Based on the transport and polarization relaxation theories, the effects of hydrogen, fluorine, and chlorine atom passivation on the conductivity and dielectric properties of silicon carbide nanowires (SiCNWs) were numerically simulated. The results show that passivation can decrease the dark conductivity of SiCNWs and increase its ultraviolet photoconductivity. Among them, the photoconductivity of univalent (H) passivated SiCNWs is better than that of seven-valent (Cl, F) passivated SiCNWs. In terms of dielectric properties, the passivated SiCNWs exhibit a strong dielectric response in both deep ultraviolet and microwave regions. Hydrogen passivation SiCNWs produce the strongest dielectric response in deep ultraviolet, while fluorine passivation SiCNWs produce the strongest dielectric relaxation in the microwave band, which indicates that atomic passivation SiCNWs have a wide range of applications in ultraviolet optoelectronic devices and microwave absorption and shielding.

Morphology dependent EMI shielding performance of Ag-Ni core-shell nanowires

The proposed work reports a facile chemical reduction method for synthesizing the hierarchical silver-nickel core-shell nanowire structures with controllable morphologies by varying the Ag concentration. The growth of Ni shells around the Ag core to make thorny and smooth Ag-Ni core-shell nanowires is studied for addressing electromagnetic interference (EMI). The synthesized Ag-Ni nanowires show better EMI shielding effectiveness (SE) than Ni nanowires with much-improved absorption loss (SEA). Due to high electrical conductivity (8630 S cm−1), magnetic permeability (44.1 emu/g), and heterojunction core-shell interfaces, the bimetallic nanowires flakes exhibit exceptional average EMI SE of 90.5 dB in the X-band frequency range (8–12 GHz) with a thickness of 0.11 mm, taking specific EMI SE to 822.72 dB/mm. In addition, the EMI shielding performance of the smooth Ag-Ni nanowires showed a 45% enhancement in SEA with marginal change in reflection loss (SER) compared to the thorny ones, indicating high absorption of EM waves. The unique core-shell nanowires with high aspect ratio with tunable physical properties can be ideal candidates for futuristic applications in microwave absorption and electromagnetic interference shielding.

Constructing graphene-based aerogel with bi-continuous interpenetrating networks as a multi-functional microwave absorber

The design of three-dimensional networks in graphene-based aerogels is an effective strategy for fabricating a lightweight microwave absorber with strong absorption and broad effective bandwidth. Herein, a multi-functional aerogel with bi-continuous interpenetrating networks comprised of reduced graphene oxide (RGO) and cellulose nanofiber (CNF) was developed via an “ice-dissolving” (freezing and solvent exchange) and subsequent annealing strategy. Different from the conventional step-by-step construction of two independent networks, the bi-continuous interpenetrating networks were simultaneously built in a one-step freezing process. Notably, the network structure of the aerogel can be tuned by adjusting the concentration of CNF (CCNF) during the freezing stage. When the CCNF increased from 2 to 8 wt%, the network structure transitioned from a single three-dimensional RGO skeleton to ordered bi-continuous interpenetrating networks, and then to a disordered CNF/RGO mixed network. The mutual contributions from the RGO skeleton and CNF network endowed the aerogel (14.96 mg cm−3) with improved conduct loss and optimized characteristic impedance, leading to an excellent microwave absorption capacity. Consequently, the aerogel achieved a maximum reflection loss of −68.3 dB and an effective bandwidth of 6.9 GHz, respectively. Moreover, the unique network structure also enabled the sample to have superior noise absorbing performance (normalized absorption coefficient of 0.894 in 250–6300 Hz) and good structural stability. This strategy provides a facile avenue for constructing multi-functional aerogels with bi-continuous interpenetrating networks for both microwave absorption and noise absorption applications.

Dielectric, physicochemical, and reflection loss features of Gd-substituted W-type hexaferrites for microwave absorption application

Dielectric, physicochemical, and reflection loss features of Gd-substituted W-type hexaferrites for microwave absorption application

Synthesis of metallic-phase MoS2 nanospheres with high microwave absorbing performance

Metallic phase of MoS2 (M−MoS2) is a metastable state that does not occur naturally. To the best of our knowledge, there has been no prior preparation of pure and stable M−MoS2 nanospheres. The high purity, uniform, and stable two-dimensional M−MoS2 nanospheres were synthesized in ethyl alcohol through a hydrothermal reaction in this study. The as-prepared M−MoS2 demonstrates excellent microwave absorbing performance (MAP), with a minimum reflection loss (RL) of −39.88 dB at a thickness of 1.3 mm and an effective attenuation bandwidth (RL < -10 dB) up to 8.31 GHz (9.6875–18.0 GHz). These results suggest that M−MoS2 is a promising and cost-effective option for microwave absorption applications.

Structural, morphological, dielectric, and spectral properties of Sr-Mg-Ho X-type magnetic nano materials suitable for microwave absorption application

Holmium (Ho3+) substituted Sr2Mg2Fe28O46 X-type hexa-ferrites were synthesized using the sol-gel auto-combustion route. The single phase of Sr2Mg2Fe28-xHoxO46 where 0.00 ≤ x ≤ 0.20, Δx = 0.05, X-type hexa-ferrites was confirmed using XRD peaks. The crystalline size was studied from XRD data and found to be in the 11 nm–24 nm range. The micro strain increased with the substitution of Ho3+. FTIR exposed the specific stretching vibration and absorption peaks in the 400 cm−1 - 600 cm−1 range. The force constant (ko) decreased from 1.74 N/cm to 1.65 N/cm with the increasing concentration of Ho3+. The grain size range is 371–493 nm, measured by SEM analysis, and plate-like structure plays a crucial role in enhancing the permeability of magnetic material. Transmission electron microscopy (TEM) analysis showed the hexagonal structure of X-type ferrites (x = 0.20). The results of the X-ray photoelectron spectroscopy (XPS) experiment confirmed the presence of all metal ions in the given composition with their required valences. The dielectric constant, dielectric loss, and tangent loss are found to increase with the substitution of the Ho3+ ion. In addition, the higher values of dielectric parameters and dielectric loss suggest that the material may suitable for high-frequency applications and best for microwave absorbers. Our aim is to discuss the characteristics and applications of microwave absorption materials, understand their behavior, and contribute to the development of upcoming novel devices. The resonance peak's appearance shows that these materials are best for multilayer chip inductors and EMI attenuation.