Applications Of Graft Copolymers Research Articles

Graft copolymers containing poly(3-hydroxyalkanoates) — A review on their synthesis, properties, and applications

The use of the poly(3-hydroxyalkanoates) in copolymer synthesis has received much interest, as the microbial polyester segments can bring interesting properties, such as biodegradability and biocompatibility. The synthesis, properties, and applications of graft copolymers containing poly(3-hydroxyalkanoates) as main chain or branches are reviewed here, with emphasis on the different preparation methods, which fit into the three main synthesis strategies of graft copolymers: “grafting onto”, “grafting from”, and “grafting through” or macromonomer methods.Key words: poly(3-hydroxyalkanoates), graft copolymer, synthesis, properties, applications.

Graft copolymerization of sodium acrylate onto organophilic montmorillonites initiated by potassium diperiodatonickelate (IV) and application of graft copolymer in water‐superabsorbent

AbstractThe graft copolymerization of sodium acrylate (SA) onto organophilic montmorillonites (OMMT) initiated by redox reaction of potassium diperiodatonickelate (IV) [Ni(IV)] with reactive groups on OMMT substrate was studied in alkaline medium. The grafting parameters have been investigated as a function of the ratio of monomer to OMMT, the concentration of initiator, temperature, and pH value. The structure of the graft copolymer (OMMT‐g‐PSA) was systematically characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscope (SEM). It was found that [Ni(IV)] belongs to a highly efficient initiator for graft copolymerization of SA onto OMMT via the redox iniation (grafting efficiency > 95%). Furthermore, the experimental results also showed that the graft copolymer gels synthesized under optimal condition exhibited a maximum water absorbency of 1104 g/g in distilled water and 111 g/g in 0.2 wt % NaCl solution, respectively, and its water retention ability is more than 91% after centrifugal separation for 2 h. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008

Application of graft copolymers using macromonomer method to two-component polyurethane coatings

Graft copolymers as acrylic polyols in two-component polyurethane coatings were prepared by the free-radical copolymerization of methyl methacrylate, n-butyl methacrylate, n-butyl acrylate, acrylic acid, 2-hydroxyethyl methacrylate and poly(methyl methacrylate)-macromonomers. The poly(methyl methacrylate) macromonomer was prepared by the polymerization of methyl methacrylate in the presence of thiopropionic acid as a transfer agent followed by the reaction with glycidyl methacrylate. These polymers, whose numbers of poly(methyl methacrylate) macromonomer branches and the molecular weights of the poly(methyl methacrylate) macromonomer branches were controlled, offer an advantage over conventional resins with respect to the application/appearance of coatings as well as the final film properties. Some of these advantages were higher solids and a better control of the coating rheology, an increase in the cross-linking reactivity of the polyols with polyisocyanate and improvement in film toughness. The change in the morphological structure of the films under tensile stress was of particular interest.

Radiation grafting — state-of-the-art

Radiation grafting is now a process more than 35 years old. In spite of an enermous amount of ingenious research, it has still not led to any large scale commercial exploitation. The same could be said, however, about the various chemical methods of graft copolymerization. Hopeful signs are beginning to appear and some of these possibilities will be discussed. The successful development of new applications of graft copolymers will be the clue to how the whole field develops. Three standard methods of grafting were developed early in the field and are still the main techniques available. These are the mutual (simulataneous), the preirradiation (consecutive), and the peroxide methods. The present status of each and the more modern developments and variations will be discussed in some detail. Although the kinetics of graft copolymerization point towards the lower dose rate gamma radiation sources, there are interesting possibilities with the use of electron beam processing. There is considerable interest, for example, in surface modification with grafting. In this respect, photo-grafting will complete with electron beam processing as it does with radiation curing. Methods of increasing the radiation yields and reducing the formation of homopolymer will also be emphasized. In the past several years, with all methods of grafting including radiation, there has been increased emphasis on applications. This may be regarded as a healthy sign in this fascinating technique.

Syntheses and applications of graft copolymers from poly(1,1-diphenylethylene-co-divinylbenzene)s

Greffage de monomeres vinyliques sur les copolymeres du titre; applications comme emulsifiant polymere et electoresist negatif

Some Recent Advances in Pure and Applied Aspects of Graft Copolymers

Abstract In recent years more attention has been given to the preparation and characterization of graft copolymers and an examination of their properties than to developing novel methods of synthesis. In particular, these property studies can be used to develop applications of graft copolymers. The methods used to prepare and characterize better defined grafts are briefly reviewed. The structure of most graft copolymers is such that considerable amounts of one polymer can be grafted to another without affecting greatly the main properties of that polymer. In this way, the properties of one polymer such as higher water absorption can be imparted to another without changing the mechanical properties, for example, of the second polymer. Some other inherent properties of graft copolymers are discussed, including their compatibility with the parent homopolymers, their possible con-formational changes, and other features. Finally, the use of the special nature of graft copolymers for the modification of the bar...