Application Of Lithium-sulfur Batteries Research Articles

Amorphous bimetallic-organic framework enable accelerated redox kinetics and polysulfide trapping for lithium-sulfur batteries

Severe polysulfide dissolution and shuttling during charging and discharging are the main challenges hindering the practical application of lithium-sulfur (Li-S) batteries. Constructing functional separators is considered as an economical and convenient way to suppress the shuttle effect and improve the kinetics of Li-S chemistry. In this work, partially ligand-deficient amorphous bimetallic MOF material (aFeNi-MOF) is designed via a ligand competition strategy and employed as a separator modifier. The aFeNi-MOF not only promotes the rapid transportation of ions, but also enhances the chemisorption and catalytic capability on sulfur species, enabling accelerated redox kinetics and polysulfide trapping in Li-S batteries. Consequently, the assembled coin cell using aFeNi-MOF-modified separator delivered a high reversible capacity of 931.1 mAh/g at 1C, a long cycle life of more than 500 cycles and a low capacity decay of 0.084 % per cycle. Meanwhile, the areal capacity of 3.70 mAh cm−2 can be achieved under a high sulfur loading of 4.5 mg cm−2 and low electrolyte usage, meeting the requirement of areal capacity for commercial applications of Li-S batteries.

Mo2C-Co heterostructure with carbon nanosheets decorated carbon microtubules: Different means for high-performance lithium-sulfur batteries

The practical applications of lithium sulfur batteries (LSBs) are hindered by notorious shuttle effect and sluggish conversion kinetics of intermediate polysulfides. Herein, Mo2C-Co heterogeneous particles decorated two-dimensional (2D) carbon nanosheets grown on hollow carbon microtubes (CCC@MCC) are synthesized. Three-dimensional (3D) carbon framework with Mo2C-Co heterogeneous particles combines the conductivity, adsorption and catalysis, effectively trapping and accelerating the conversion of polysulfides. As evidenced experimentally, the hetero-structured Mo2C-Co with high Li+ diffusion coefficient enables uniform precipitation and complete oxidation of Li2S. Meanwhile, CCC@MCC is found to have multiple application possibilities for lithium-sulfur batteries. As an interlayer, the cells deliver an excellent capacity of 881.1 mAh/g at 2C and still retain 438.2 mAh/g after 500 cycles under the low temperature of 0 ℃. As a sulfur carrier, the cell with a sulfur loading of 7.0 mg cm−2 exhibits a high area capacity of 5.3 mAh cm−2. This work provides an effective strategy to prepare heterostructured material and imaginatively exploit the application potential of it.

Design of Coatings for Sulfur-Based Cathode Materials in Lithium-Sulfur Batteries: A review.

Lithium-sulfur batteries (LSBs) are considered next-generation energy storage and conversion solutions owing to their high theoretical specific capacity and the high abundance/low-cost of sulfur-based cathode materials. However, LSBs still encounter significant challenges, including the low conductivities of sulfur-based materials, severe volumetric expansion of sulfur during the discharge process, and the persistent "shuttle effect" of polysulfides. In recent years, a tremendous amount of research has been conducted to address the above challenges by developing coating and compositing materials and corresponding fabrication strategies for sulfur-based cathode materials. In this study, the surface coating, compositing materials, and fabrication methodologies of LSB cathodes are comprehensively reviewed in terms of advanced materials, structure/component characterization, functional mechanisms, and performance validation. Some technical challenges are analyzed in detail, and possible future research directions are proposed to overcome the challenges toward practical applications of lithium-sulfur batteries.

A Review of Electrospun Carbon-based Nanofibers Materials Used in Lithium-Sulfur Batteries.

Commercial lithium-ion batteries are gradually approaching their theoretical values (200-250 Wh kg-1), which cannot meet the fast-growing energy storage demands. Lithium-sulfur (Li-S) batteries are anticipated to supersede lithium-ion batteries as the next-generation energy storage system owing to their high theoretical specific capacity (1675 mAh g-1) and energy density (2600 Wh kg-1). Nonetheless, Li-S batteries encounter several challenges, including the inadequate conductivity of sulfur and lithium sulfide, sulfur's volume expansion, and the shuttle effect of lithium polysulfides, all of which significantly impact the practical utilization of Li-S batteries. Electrospun carbon-based nanofibers can simultaneously resolve these issues with their economical preparation, distinctive nanostructure, and exceptional flexibility. This review presents the most recent research findings on electrospun carbon-based nanofibers materials serving as sulfur hosts and interlayer components in Li-S batteries. We analyzed the impact of the material's structural design on the performance of Li-S batteries and the relative underlying mechanism. Finally, the current challenges and issues faced by carbon-based nanofibers composites in the application of Li-S batteries are summarized, and the future development trajectory are outlined.

Nitrogen-Doped TiO2- x(B)/MXene Heterostructures for Expediting Sulfur Redox Kinetics and Suppressing Lithium Dendrites.

Practical application of lithium-sulfur (Li-S) batteries is severely impeded by the random shuttling of soluble lithium polysulfides (LiPSs), sluggish sulfur redox kinetics, and uncontrollable growth of lithium dendrites, particularly under high sulfur loading and lean electrolyte conditions. Here, nitrogen-doped bronze-phase TiO2(B) nanosheets with oxygen vacancies (OVs) grown in situ on MXenes layers (N-TiO2- x(B)-MXenes) as multifunctional interlayers are designed. The N-TiO2- x(B)-MXenes show reduced bandgap of 1.10eV and high LiPSs adsorption-conversion-nucleation-decomposition efficiency, leading to remarkably enhanced sulfur redox kinetics. Moreover, they also have lithiophilic nature that can effectively suppress dendrites growth. The cell based on the N-TiO2- x(B)-MXenes interlayer under sulfur loading of 2.5mg cm-2 delivers superior cycling performance with a high specific capacity of 690.7 mAh g-1 over 600 cycles at 1.0 C. It still has a notable areal capacity of 6.15 mAh cm-2 after 50 cycles even under a high sulfur loading of 7.2mg cm-2 and a low electrolyte-to-sulfur (E/S) ratio of 6.4 µL mg-1. The Li-symmetrical battery with the N-TiO2- x(B)-MXenes interlayer showcases a low over-potential fluctuation with 21.0mV throughout continuous lithium plating/stripping for 1000h. This work offers valuable insights into the manipulation of defects and heterostructures to achieve high-energy Li-S batteries.

Multifunctional Lithium Phytate/Carbon Nanotube Double-Layer-Modified Separators for High-Performance Lithium-Sulfur Batteries.

Li dendrite and the shuttle effect are the two primary hindrances to the commercial application of lithium-sulfur batteries (LSBs). Here, a multifunctional separator has been fabricated via successively coating carbon nanotubes (CNTs) and lithium phytate (LP) onto a commercial polypropylene (PP) separator to improve the performance of LSBs. The LP coating layer with abundant electronegative phosphate group as permselective ion sieve not only reduces the polysulfide shuttle but also facilitates uniform Li+ flux through the PP separator. And the highly conductive CNTs on the second layer act as a second collector to accelerate the reversible conversion of sulfide species. The synergistic effect of LP and CNTs further increases the electrolyte wettability and reaction kinetics of cells with a modified separator and suppresses the shuttle effect and growth of Li dendrite. Consequently, the LSBs present much enhanced rate performance and cyclic performance. It is expected that this study may generate an executable tactic for interface engineering of separator to accelerate the industrial application process of LSBs.

Flash Joule Heating: A Promising Method for Preparing Heterostructure Catalysts to Inhibit Polysulfide Shuttling in Li-S Batteries.

The "shuttle effect" issue severely hinders the practical application of lithium-sulfur (Li-S) batteries, which is primarily caused by the significant accumulation of lithium polysulfides in the electrolyte. Designing effective catalysts is highly desired for enhancing polysulfide conversion to address the above issue. Here, the one-step flash-Joule-heating route is employed to synthesize a W-W2C heterostructure on the graphene substrate (W-W2C/G) as a catalytic interlayer for this purpose. Theoretical calculations reveal that the work function difference between W (5.08eV) and W2C (6.31eV) induces an internal electric field at the heterostructure interface, accelerating the movement of electrons and ions, thus promoting the sulfur reduction reaction (SRR) process. The high catalytic activity is also confirmed by the reduced activation energy and suppressed polysulfide shuttling by in situ Raman analyses. With the W-W2C/G interlayer, the Li-S batteries exhibit an outstanding rate performance (665 mAh g-1 at 5.0 C) and cycle steadily with a low decay rate of 0.06% over 1000 cycles at a high rate of 3.0 C. Moreover, a high areal capacity of 10.9 mAh cm-2 (1381.4 mAh g-1) is obtained with a high area sulfur loading of 7.9mg cm-2 but a low electrolyte/sulfur ratio of 9.0 µL mg-1.

N-Vacancy Enriched Porous BN Fibers for Enhanced Polysulfides Adsorption and Conversion in High-Performance Lithium-Sulfur Batteries.

Severe shuttle effect of soluble polysulfides and sluggish redox kinetics have been thought of as the critical issues hindering the extensive applications of lithium-sulfur batteries (LSBs). Herein, one-dimensional boron nitride (1D BN) fibers with abundant pores and sufficient N-vacancy defects were synthesized using a thermal crystallization following a pre-condensation step. The 1D structure of BN facilitates unblocked ions diffusion pathways during charge/discharge cycles. The embedded pores within the polar BN strengthen the immobilization of polysulfides via both physical confinement and chemical interaction. Moreover, the highly exposed active surface area and intentionally created N-vacancy sites substantially promote reaction kinetics by lowering the energy barriers of the rate-limiting steps. After incorporating with conductive carbon networks and elemental S, the as-prepared S/Nv-BN@CBC cathode of LSBs deliver an initial discharge capacity of up to 1347 mAh g-1 at 200 mA g-1, while maintaining a low decay rate of 0.03% per cycle over 1000 cycles at 1600 mA g-1. This work offers an effective strategy to mitigate the shuttle effect and highlights the significant potential of defect-engineered BN in accelerating the reaction kinetics of LSBs.

Coupling bimetallic selenides with homogeneous mediators synergistically accelerating overall sulfur redox kinetics for high-performances lithium–sulfur batteries

The practical applications of lithium-sulfur batteries (LSBs) are hampered by poor electrical conductivity, severe shuttling of intermediate lithium polysulfides (LiPSs) and sluggish redox kinetics. Herein, we introduce a multifunctional catalytic system by integrating bimetallic ZnSe-CoSe2 with CoCp2 mediators, aimed at serving as redox kinetic accelerators in LSBs. In this design, the ZnSe-CoSe2 heterostructure with hierarchical pores and large surface area, is capable of immobilizing both soluble LiPSs and CoCp2 mediators, but also provides abundant active sites for catalyzing LiPSs conversions. Concurrently, the soluble CoCp2 mediators contribute to promoting the high-dimensional growth of Li2S and reducing the interface polarization. Electrochemical experiments and theoretical analyses reveal that the ZnSe-CoSe2/CoCp2 system synergistically accelerates overall sulfur redox kinetics. Consequently, the cell with the ZnSe-CoSe2/CoCp2 system under a sulfur loading of 2.3 mg cm−2 exhibits superior long-term cycling stability at 1.0C. Additionally, it achieves a remarkable areal capacity of 6.5 mAh cm−2 under a high sulfur loading of 8.0 mg cm−2 and a low electrolyte-to-sulfur ratio of 5.0 µL mg−1.

A First-Principles Study on the Anchoring Properties of Defective Single-Walled Carbon Nanotubes for Lithium-Sulfur Batteries

The application of lithium-sulfur (Li–S) batteries is impeded by the significant polysulfide shuttling phenomenon. Developing suitable anchoring material is an effective way to restrain this behavior. In this work, the anchoring performance of lithium polysulfide (LiPSs) on defective single-wall carbon nanotubes (DSWNT) is investigated by density functional theory. The results demonstrate that the DSWNT with three carbon vacancies (DSWNT-3) has the highest forming capacity and the strongest adsorption capacity, indicating it has the best anchoring effect of LiPSs. As the anchoring material of the cathode, DSWNT-3 has greater energy than solvent molecules to inhibit the dissolution of long-chain polysulfides. In general, DSWNT-3 demonstrates notable efficacy as an anchoring material for Li–S batteries, which establishes a theoretical foundation for exploring the anchoring characteristics of defects and their application in the cathode of Li–S batteries.

The important role of diatomite on multifunctional modified separator of Li-S battery

The commercial applications of lithium-sulfur (Li-S) batteries are limited by decreased cycling performance caused by the shuttle effect of polysulfides, slower kinetic reaction rates, and lithium anode dendrites. This study demonstrates the important role of diatomite (DT) in regulating cycle performance of modified separator for Li-S batteries. A multifunctional separator (Co/NC/DT) with DT as a carrier assembled high loading cobalt nanocluster is prepared. The N-doped carbon is immobilized via Si-N bond between DT and N-doped carbon. The depth profiles of XPS indicate that the ratio of pyrrolic N to pyridinic N of Co/NC/DT reaches 5.31 at the etching of 100 nm versus 0.83 for Co/NC at surface, which suggesting that mainly N species is pyrrolic N after the addition of DT. Theoretical calculations confirm that cobalt nanoclusters grown on pyrrolic N-doped carbon have a lower adsorption energy for active materials compared to that on pyridinic N-doped carbon and can reduce the energy barrier, especially only 0.09 eV for reduction from Li2S6 to Li2S4. In-situ X-ray diffraction analysis confirms Co/NC/DT can effectively promote formation of Li2S. Lithium anode in-situ optical microscopy observation shows the modified separator could reduce lithium dendrites effectively. Li-S battery assembled with the modified separator can reach an initial capacity of 1331.3 mAh g−1 at 0.2 C and cycle 1500 cycles at 1.0 C with a decay of only 0.039% per cycle. Through regulation of DT, Co/NC/DT accelerates the conversion from long-chain sulfur to short-chain sulfur and Li+ transfer rate, resulting in improving cycling performance.

Template Evolution Induced Relay Self-Assembly for Mesoporous Carbonaceous Materials via Hydrothermal Carbonization.

Constructing carbonaceous materials with versatile surface structures still remains a great challenge due to limited self-assembly methods, especially at high temperatures. This study presents an innovative template evolution induced relay self-assembly (TEIRSA) for the fabrication of large polyoxometalate (POM)-mixed carbonaceous nanosheets featuring surface mesoporous structures through hydrothermal carbonization (HTC). The method employs POM and acetone as additives, cleverly modulating the Ostwald ripening-like process of P123-based micelles, effectively addressing the instability challenges inherent in traditional soft-template methods, especially within the demanding carbohydrate HTC process. Additionally, this method allows for the independent regulation of surface architectures through the selection of organic additives. The resulting nanosheets exhibit diverse surface morphologies, including surface spherical mesopores, 1D open channels, and smooth surfaces. Their unexpectedly versatile properties have swiftly garnered recognition, showing potential in the application of lithium-sulfur batteries.

Pristine MOF Materials for Separator Application in Lithium-Sulfur Battery.

Lithium-sulfur (Li-S) batteries have attracted significant attention in the realm of electronic energy storage and conversion owing to their remarkable theoretical energy density and cost-effectiveness. However, Li-S batteries continue to face significant challenges, primarily the severe polysulfides shuttle effect and sluggish sulfur redox kinetics, which are inherent obstacles to their practical application. Metal-organic frameworks (MOFs), known for their porous structure, high adsorption capacity, structural flexibility, and easy synthesis, have emerged as ideal materials for separator modification. Efficient polysulfides interception/conversion ability and rapid lithium-ion conduction enabled by MOFs modified layers are demonstrated in Li-S batteries. In this perspective, the objective is to present an overview of recent advancements in utilizing pristine MOF materials as modification layers for separators in Li-S batteries. The mechanisms behind the enhanced electrochemical performance resulting from each design strategy are explained. The viewpoints and crucial challenges requiring resolution are also concluded for pristine MOFs separator in Li-S batteries. Moreover, some promising materials and concepts based on MOFs are proposed to enhance electrochemical performance and investigate polysulfides adsorption/conversion mechanisms. These efforts are expected to contribute to the future advancement of MOFs in advanced Li-S batteries.

Multifunctional TiN-MXene-Co@CNTs Networks as Sulfur/Lithium Host for High-Areal-Capacity Lithium-Sulfur Batteries.

The inevitable shuttling and slow redox kinetics of lithium polysulfides (LiPSs) as well as the uncontrolled growth of Li dendrites have strongly limited the practical applications of lithium-sulfur batteries (LSBs). To address these issues, we have innovatively constructed the carbon nanotubes (CNTs) encapsulated Co nanoparticles in situ grown on TiN-MXene nanosheets, denoted as TiN-MXene-Co@CNTs, which could serve simultaneously as both sulfur/Li host to kill "three birds with one stone" to (1) efficiently capture soluble LiPSs and expedite their redox conversion, (2) accelerate nucleation/decomposition of solid Li2S, and (3) induce homogeneous Li deposition. Benefiting from the synergistic effects, the TiN-MXene-Co@CNTs/S cathode with a sulfur loading of 2.5 mg cm-2 could show a high reversible specific capacity of 1129.1 mAh g-1 after 100 cycles at 0.1 C, and ultralong cycle life over 1000 cycles at 1.0 C. More importantly, it even achieves a high areal capacity of 6.3 mAh cm-2 after 50 cycles under a sulfur loading as high as 8.9 mg cm-2 and a low E/S ratio of 5.0 μL mg-1. Besides, TiN-MXene-Co@CNTs as Li host could deliver a stable Li plating/striping behavior over 1000 h.

Chip-Inspired Design of High-Performance Lithium-Sulfur Batteries by Integrating Monodisperse Sulfur Nanoreactors on Graphene.

For practical application of lithium-sulfur batteries (LSBs), designing devices with an overall optimal structure instead of modifying electrode materials is significant. Herein, we report a chip-inspired design of a vertically integrated structure as an LSB cathode by implanting Mo2C nanoparticles and nanosulfur into the reduced graphene oxide (rGO) matrix. This configuration enabled the synthesis of isolated sulfur nanoreactors (S-NRs) integrated in a tandem array on the rGO, generating chip-like integrated LSBs. The spatial confinement/protection and concentration gradient of the S-NRs effectively avoided the dissolution, diffusion, and loss of polysulfides, thereby enhancing the sulfur utilization and redox reaction kinetics. Additionally, the adaptive storage energy can be improved by utilizing the tandem, isolation, and synergistic multiplicative effect among the nanoreactor units. As a result, the integrated LSB cathode obtained excellent electrochemical performances with an initial capacity of 1392 mAh g-1 at 0.1C, a low capacity decay rate of 0.017% per cycle during 1500 cycles of operation at 0.5C, and a superior rate performance. This work provides a rational design idea and method of further advancing the precise preparation of high-performance energy storage devices.

Screening Conductive MXenes for Lithium Polysulfide Adsorption

AbstractMXenes are promising passive components that enable lithium‐sulfur batteries (LSBs) by effectively trapping lithium polysulfides (LiPSs) and facilitating surface‐mediated redox reactions. Despite numerous studies highlighting the potential of MXenes in LSBs, there are no systematic studies of MXenes’ composition influence on polysulfide adsorption, which is foundational to their applications in LSB. Here, a comprehensive investigation of LiPS adsorption on seven MXenes with varying chemistries (Ti2CTx, Ti3C2Tx, Ti3CNTx, Mo2TiC2Tx, V2CTx, Nb2CTx, and Nb4C3Tx), utilizing optical and analytical spectroscopic methods is performed. This work reports on the influence of polysulfide concentration, interaction time, and MXenes’ chemistry (transition metal layer, carbide and carbonitride inner layer, surface terminations and structure) on the amount of adsorbed LiPSs and the adsorption mechanism. These findings reveal the formation of insoluble thiosulfate and polythionate complex species on the surfaces of all tested MXenes. Furthermore, the selective adsorption of lithium and sulfur, and the extent of conversion of the adsorbed species on MXenes varied based on their chemistry. For instance, Ti2CTx exhibits a strong tendency to adsorb lithium ions, while Mo2TiC2Tx is effective in trapping sulfur by forming long‐chain polythionates. The latter demonstrates a significant conversion of intermediate polysulfides into low‐order species. This study offers valuable guidance for the informed selection of MXenes in various functional components benefiting the future development of high‐performance LSBs.

Triple Effect of "Conductivity-Adsorption-Catalysis" Enables MXene@FeCoNiP to be Sulfur Hosts for Lithium-Sulfur Batteries.

The weak chemical immobilization ability and poor catalytic effect of MXene inhibit its application in lithium-sulfur (Li-S) batteries. Herein, a novel MXene@FeCoNiP composite is rationally developed and utilized as a sulfur host for Li-S batteries. In this well-designed MXene-based nanostructure, the introduction of FeCoNiP in the interlayer of MXene nanosheets can not only effectively inhibit the restacking of MXene nanosheets but also act as an accelerator for the adsorption and catalysis of polysulfides to restrain the shuttling effect and facilitate the transformation of polysulfides. The existence of two-dimensional MXene nanosheets provides more active sites and improves the conductivity, which is beneficial for accelerating the reaction kinetics. Thus, the as-prepared MXene@FeCoNiP composites achieve an outstanding performance for Li-S batteries. This work provides an opportunity to construct an ideal sulfur host with the triple effect of "conductivity-adsorption-catalysis".

Rational design of nitrogen-doping Ti3C2Tx microspheres with enhanced polysulfide catalytic activity for lithium-sulfur batteries

The primary challenges that impede the practical applications of lithium-sulfur batteries are the significant shuttle effect of polysulfides, huge volume expansion, and slow redox kinetics. In this work, three-dimensional nitrogen doping Ti3C2Tx MXenes (3D N-Ti3C2Tx ) were successfully synthesized by spray drying and subsequent annealing, and hydrochloric acid-treated melamine effectively reduces the oxidation of MXenes in these processes. The formation of a unique nanoflower-shaped microsphere endows 3D N-Ti3C2Tx with a significant specific surface area and pore volume. The combination of nitrogen doping and the large specific surface area increased adsorption capacity and catalytic conversion ability for polysulfide intermediates. Consequently, the obtained 3D N-Ti3C2Tx /S cathode exhibited high-capacity retention (578.5 mAh g-1 after 500 cycles at 0.5 C and 462.5 mAh g-1 after 1,000 cycles at 1 C), superior rate performance (651.2 mAh g-1 at 3 C), and excellent long-term cycling performance (capacity fading rate of 0.076% per cycle at 0.5 C and 0.046% per cycle at 1 C). This work expands the potential applications of MXenes for lithium-sulfur batteries.

High-Entropy Metal Oxide-Coated Carbon Cloth as Catalysts for Long-Life Li-S Batteries.

Lithium-sulfur (Li-S) batteries with high specific energy density, low cost, and environmental friendliness of sulfur have been regarded as a competitive alternative to replace lithium-ion batteries. However, the shuttle effect and the sluggish conversion rate of lithium polysulfides (LiPSs) have seriously limited the practical application of Li-S batteries. Herein, high-entropy oxides grown on the carbon cloth (CC/HEO) are synthesized by a simple and ultrafast solution combustion method for the sulfur cathode. The as-prepared composites possess abundant HEO active sites for strong interaction with LiPSs, which can significantly promote redox kinetics. Besides, the carbon fiber substrate not only ensures high electrical conductivity but also accommodates large volume change, leading to a stable sulfur electrochemistry. Benefiting from the rational design, the Li-S batteries with CC/HEO as cathode skeleton exhibits good cyclability with a capacity decay rate of 0.057% per cycle after 1000 cycles at 2 C. More importantly, the Li-S batteries with 4.3 mg cm-2 high sulfur loading can still retain a high capacity retention of 78.2% after 100 cycles.

1T-rich MoS2 nanosheets anchored on conductive porous carbon as effective polysulfide promoters for lithium–sulfur batteries

The practical applications of lithium-sulfur (Li-S) batteries have severely been hindered by notorious shuttle effect and sluggish redox kinetics of lithium polysulfide intermediates (LiPSs), which bring about rapid capacity degradation, low coulombic efficiency and poor cycling stability. In this work, 1T-rich MoS2 nanosheets are in-situ developed onto the conductive porous carbon matrix (1T-rich MoS2@PC) as efficient polysulfide promotors for high-performance Li-S batteries. The porous carbon skeleton tightly anchors MoS2 nanosheets to prevent their reaggregation and ensures accessible electrical channels, and at the same time provides a favorable confined space that promotes the generation of 1T-rich MoS2 structure. More importantly, the uniformly distributed metallic 1T-rich MoS2 nanosheets not only affords rich sulfphilic sites and high binding energy for immobilizing LiPSs, but also favors rapid electron transfer and LiPSs conversation kinetics, substantially regulating sulfur chemistry in working cells. Consequently, the Li-S cell assembled with 1T-rich MoS2@PC modified separator delivers a remarkable cycling stability with ultralow capacity decay rate of 0.067% over 500 cycles at 1C. Encouragingly, under harsh conditions (high sulfur loading of 4.78 mg cm−2 and low E/S ratio of 8 μL mg−1), a favorable electrochemical performance can still be demonstrated. This study highlights the profitable design of 1T-rich MoS2/carbon based electrocatalyst for suppressing shuttle effect and promoting catalytic conversation of LiPSs, and has the potential to be applied to in other energy storage systems.