Antimony In Samples Research Articles

Magnetic Ion Imprinted Polymers (MIIPs) for Selective Extraction and Preconcentration of Sb(III) from Environmental Matrices.

Antimony(III) is a rare element whose chemical and toxicological properties bear a resemblance to those of arsenic. As a result, the presence of Sb(III) in water might have adverse effects on human health and aquatic life. However, Sb(III) exists at very ultra-trace levels which may be difficult for direct quantification. Therefore, there is a need to develop efficient and reliable selective extraction and preconcentration of Sb(III) in water systems. Herein, a selective extraction and preconcentration of trace Sb(III) from environmental samples was achieved using ultrasound assisted magnetic solid-phase extraction (UA-MSPE) based on magnetic Sb(III) ion imprinted polymer-Fe3O4@SiO2@CNFs nanocomposite as an adsorbent. The amount of antimony in samples was determined using inductively coupled plasma optical emission spectrometry (ICP-OES). The UA-MSPE conditions were investigated using fractional factorial design and response surface methodology based on central composite design. The Sb(III)-IIP sorbent displayed excellent selectivity towards Sb(III) as compared to NIIP adsorbent. Under optimised conditions, the enrichment factor, limit of detection (LOD) and limit of quantification (LOQ) of UA-MSPE/ICP-OES for Sb(III) were 71.3, 0.13 µg L−1 and 0.44 µg L−1, respectively. The intra-day and inter-day precision expressed as relative standard deviations (%RSDs, n = 10 and n = 5) were 2.4 and 4.7, respectively. The proposed analytical method was applied in the determination of trace Sb(III) in environmental samples. Furthermore, the accuracy of the method was evaluated using spiked recovery experiments and the percentage recoveries ranged from 95–98.3%.

Preliminary results of a quick, simple method of detecting antimony in water samples

Abstract Preliminary results of development of a direct and fast method of determination of antimony in samples of tap water using GFAAS are presented. The found levels of antimony were lower than permitted for human consumption. A mixture of Pd and Mg(NO3)2 (concentrations in the injected solution: 8.6 μg mL−1 and 5.8 μg mL−1 respectively) was used as the chemical modifier. The pyrolysis and atomization temperatures were 1000 and 1700°C, respectively and the mean analytical recovery 98.2%.

Determination of Sb(III) and Sb(V) in Water Samples by Hydride Generation Atomic Absorption Spectrometry with In-Situ Trapping in a Graphite Tube

This work presents results of determinations of inorganic Sb(III)/Sb(V) species and total content of antimony in water samples by the method of atomic absorption spectrometry with hydride generation and in-situ concentration in a graphite tube. The achieved determination limit (3σ) was 0.014 ng/mL for determination of Sb(III) species and the total content of antimony. Moreover, the paper reports results of antimony determination in samples of mineral and tap water obtained by the method with the analyte concentration on the atomizer (graphite tube) surface. The content of antimony in the samples studied varied in the range from 0.04 ng/mL to 0.44 ng/mL for Sb(III) and from 0.22 ng/mL to 0.62 ng/mL for Sb(V).

Potentiometric stripping analysis (PSA) for monitoring of antimony in samples of vegetation from a mining area.

A potentiometric stripping analysis (PSA) method has been developed and checked for the fast and reliable determination of antimony in vegetation samples of Cistus ladanifer from a mining area in Badajoz, Southwest Spain. The method, modified from previous PSA methods for Sb in environmental samples, is based on dry ashing of the homogenized leaves, dissolution in hydrochloric acid, and PSA analysis on a mercury film plated on to a glassy carbon disk electrode. The influence of experimental variables such as the deposition potential, the deposition time, the signal stability and the calibration parameters, has been investigated. The method has been compared with an independent technique (instrumental neutron activation analysis) by analysis of standards and reference materials and comparison of the results. As a result of automation of the PSA equipment, the proposed method enables unattended analysis of 20 digested samples in a total time of 2 h, thus providing a useful tool for Sb monitoring of a large number of samples.

Determination of metals in poly(vinyl chloride) by atomic absorption spectrometry. Part I. Determination of calcium, aluminium and antimony in samples of poly(vinyl chloride) with a high content of alkaline earths

The treatment of PVC with H2SO4 and H2O2 causes difficulties if the PVC contains lead or alkaline earths because of the precipitation of the corresponding sulphates. This precipitate can be dissolved with EDTA in ammonia. The procedure is fast and simple and the determination of calcium, aluminium and antimony by atomic absorption spectrometry give a good degree of accuracy.

Differential pulse polarography of germanium(IV), tin(IV), arsenic(V), antimony(V), selenium(IV) and tellurium(VI) at the static mercury drop electrode in catechol—perchlorate media

The differential pulse polarography of Ge(IV), Sn(IV), As(V), Sb(V), Se(IV) and Te(VI) has been investigated in perchlorate media containing catechol using a static mercury drop electrode. Under optimum conditions, Ge(IV), Sn(IV), As(V), and Sb(V) undergo reduction to yield well-defined peaks; detection limits of 82 ppb, 28 ppb, 4 ppm, and 25 ppb, respectively, have been calculated. Few electrolytes are known for which these ions exhibit a quantitatively useful polarographic response. While Se(IV) and Te(VI) may be detected at levels of 115 ppb and 17 ppb, respectively, addition of catechol does not enhance the peak current relative to that observed in simple perchlorate solutions, as was the case for the other ions studied. The determination of germanium, arsenic and antimony in samples is described.

Photometric determination of traces of antimony with rhodamine b after sulfide precipitation

A method is described for the colorimetric determination of as little as a few tenths of a part per million of antimony in samples composed primarily of elements of atomic numbers 1–28 ( e.g., geo materials). Antimony is isolated by sulfide precipitation in mineral acid medium after reduction of ferric iron with hydroxylamine hydrochloride, with final determination by rhodamine B-benzene extraction. The procedure provides for the presence of gallium, thallium, tungsten and gold.