Antimicrobial Peptidomimetics Research Articles

L-Ornithine derivatives with structural hetaryl and alkyl moiety: Synthesis and antibacterial activity

Objectives. Cationic amphiphiles and antimicrobial peptidomimetics are widely investigated as antibacterial agents due to their membrane-active mechanism of action. Particular attention is focused on the rational design of compounds in this class to achieve high antimicrobial activity. The aim of the present work is to synthesize bivalent cationic amphiphiles with L-ornithine as a branching element and evaluate the effectiveness of their antibacterial action. The compounds differ in terms of hydrophobicity due to the variation of N-terminal aliphatic amino acids in the polar block and alternation of dialkyl and alkyl-hetaryl radicals in the lipophilic block.Methods. For the synthesis of nonpolar fragments of amphiphiles, methods for the alkylation of amines with alkyl bromides in the presence of carbonate salts were used. The formation of amide bonds of L-ornithine derivatives with amino acids was carried out using the carbodiimide method. For the reaction products recovery from the reaction mixture, column chromatography on silica gel and aluminum oxide activated Brockmann Grade II was used. The antimicrobial activity of the synthesized compounds against gram-positive B. subtilis 534 and gram-negative E. coli M17 bacterial strains was evaluated. Minimum inhibitory concentration (MIC) values were recorded using a serial microdilution method in a nutrient medium.Results. Developed schemes for the preparation of bivalent cationic amphiphiles based on L-ornithine derivatives are presented. Differences in the structure of aliphatic amino acids (glycine, β-alanine, γ-aminobutyric acid (GABA)), in the length of alkyl radicals (C8, C12), or in the presence of an indole moiety, were used in the design of target compounds. The high antibacterial activity of the synthesized compounds was demonstrated. The most active compounds were lipoamino acids with terminal GABA residues and asymmetrical non-polar block (tryptamyl–dodecylamine). The MIC values were 0.39 μg/mL for gram-positive bacteria and 1.56 μg/mL for gram-negative bacteria. A GABA derivative with a symmetrical lipophilic moiety based on dioctylamine demonstrated activity with an MIC of 0.78 μg/mL against B. subtilis and 3.12 μg/mL against E. coli.Conclusions. Nine new lipoamino acid cationic bivalent amphiphiles based on L-ornithine were synthesized. The structure of the obtained compounds was confirmed by nuclear magnetic resonance 1H spectroscopy and mass spectrometry data. Leading compounds in antimicrobial activity against both gram-positive and gram-negative strains of bacteria were determined. The influence of the degree of lipophilicity in the asymmetric nonpolar block on the level of exhibited antimicrobial activity is demonstrated.

Recent Advances in Amphipathic Peptidomimetics as Antimicrobial Agents to Combat Drug Resistance.

The development of antimicrobial drugs with novel structures and clear mechanisms of action that are active against drug-resistant bacteria has become an urgent need of safeguarding human health due to the rise of bacterial drug resistance. The discovery of AMPs and the development of amphipathic peptidomimetics have lay the foundation for novel antimicrobial agents to combat drug resistance due to their overall strong antimicrobial activities and unique membrane-active mechanisms. To break the limitation of AMPs, researchers have invested in great endeavors through various approaches in the past years. This review summarized the recent advances including the development of antibacterial small molecule peptidomimetics and peptide-mimic cationic oligomers/polymers, as well as mechanism-of-action studies. As this exciting interdisciplinary field is continuously expanding and growing, we hope this review will benefit researchers in the rational design of novel antimicrobial peptidomimetics in the future.

Antimicrobial Peptidomimetics Prevent the Development of Resistance against Gentamicin and Ciprofloxacin in Staphylococcus and Pseudomonas Bacteria.

Bacteria readily acquire resistance to traditional antibiotics, resulting in pan-resistant strains with no available treatment. Antimicrobial resistance is a global challenge and without the development of effective antimicrobials, the foundation of modern medicine is at risk. Combination therapies such as antibiotic-antibiotic and antibiotic-adjuvant combinations are strategies used to combat antibiotic resistance. Current research focuses on antimicrobial peptidomimetics as adjuvant compounds, due to their promising activity against antibiotic-resistant bacteria. Here, for the first time we demonstrate that antibiotic-peptidomimetic combinations mitigate the development of antibiotic resistance in Staphylococcus aureus and Pseudomonas aeruginosa. When ciprofloxacin and gentamicin were passaged individually at sub-inhibitory concentrations for 10 days, the minimum inhibitory concentrations (MICs) increased up to 32-fold and 128-fold for S. aureus and P. aeruginosa, respectively. In contrast, when antibiotics were passaged in combination with peptidomimetics (Melimine, Mel4, RK758), the MICs of both antibiotics and peptidomimetics remained constant, indicating these combinations were able to mitigate the development of antibiotic-resistance. Furthermore, antibiotic-peptidomimetic combinations demonstrated synergistic activity against both Gram-positive and Gram-negative bacteria, reducing the concentration needed for bactericidal activity. This has significant potential clinical applications-including preventing the spread of antibiotic-resistant strains in hospitals and communities, reviving ineffective antibiotics, and lowering the toxicity of antimicrobial chemotherapy.

α,α-disubstituted β-amino amides eliminate Staphylococcus aureus biofilms by membrane disruption and biomass removal

Bacterial biofilms account for up to 80% of all infections and complicate successful therapies due to their intrinsic tolerance to antibiotics. Biofilms also cause serious problems in the industrial sectors, for instance due to the deterioration of metals or microbial contamination of products. Efforts are put in finding novel strategies in both avoiding and fighting biofilms. Biofilm control is achieved by killing and/or removing biofilm or preventing transition to the biofilm lifestyle. Previous research reported on the anti-biofilm potency of α,α-disubstituted β-amino amides A1, A2 and A3, which are small antimicrobial peptidomimetics with a molecular weight below 500 Da. In the current study it was investigated if these derivatives cause a fast disintegration of biofilm bacteria and removal of Staphylococcus aureus biofilms. One hour incubation of biofilms with all three derivatives resulted in reduced metabolic activity and membrane permeabilization in S. aureus (ATCC 25923) biofilms. Bactericidal properties of these derivatives were attributed to a direct effect on membranes of biofilm bacteria. The green fluorescence protein expressing Staphylococcus aureus strain AH2547 was cultivated in a CDC biofilm reactor and utilized for disinfectant efficacy testing of A3, following the single tube method (American Society for Testing and Materials designation number E2871). A3 at a concentration of 90 μM acted as fast as 100 μM chlorhexidine and was equally effective. Confocal laser scanning microscopy studies showed that chlorhexidine treatment lead to fluorescence fading indicating membrane permeabilization but did not cause biomass removal. In contrast, A3 treatment caused a simultaneous biofilm fluorescence loss and biomass removal. These dual anti-biofilm properties make α,α-disubstituted β-amino amides promising scaffolds in finding new control strategies against recalcitrant biofilms.

Design and synthesis of broad-spectrum antimicrobial amphiphilic peptidomimetics to combat drug-resistance

The gradual depletion of antibiotic discovery pipeline makes the antibiotic resistance a difficult clinical problem and a global health emergency. The membrane-active antimicrobial peptides (AMPs) attracted much attention due to a lower tendency to bacterial resistance than traditional antibiotics. However, some immanent drawbacks of AMPs may hamper their application in combating antibiotic resistance in the long run, such as susceptible to enzymatic degradation and low cell permeability. Herein, we report the design and synthesis of a novel series of amphiphilic peptidomimetics, from which we identified compounds that exhibited potent antimicrobial activity against a panel of clinically relevant Gram-positive and Gram-negative bacteria strains. The most potent compound 20 (SD-110-12) is able to kill intracellular bacterial pathogens and prevent the development of bacterial resistance under the tested conditions by targeting cell membranes. Additionally, compound 20 (SD-110-12) obtains good in vivo efficacy that is comparative to vancomycin by eradicating MRSA and suppressing inflammation in a mice infected skin wound model, demonstrating its promising therapeutic potential.

Short, Lipidated Dendrimeric γ-AApeptides as New Antimicrobial Peptidomimetics.

Antibiotic resistance is one of the most significant issues encountered in global health. There is an urgent demand for the development of a new generation of antibiotic agents combating the emergence of drug resistance. In this article, we reported the design of lipidated dendrimeric γ-AApeptides as a new class of antimicrobial agents. These AApeptides showed excellent potency and broad-spectrum activity against both Gram-positive bacteria and Gram-negative bacteria, including methicillin-resistant Staphylococcus aureus (MRSA). The mechanistic studies revealed that the dendrimeric AApeptides could kill bacteria rapidly through the permeabilization of bacterial membranes, analogous to host-defense peptides (HDPs). These dendrimers also did not induce antibiotic resistance readily. The easy access to the synthesis, together with their potent and broad-spectrum activity, make these lipidated dendrimeric γ-AApeptides a new generation of antibacterial agents.

Designer co-beta-peptide copolymer selectively targets resistant and biofilm Gram-negative bacteria

New antimicrobials are urgently needed to combat Gram-negative bacteria, particularly multi-drug resistant (MDR) and phenotypically resistant biofilm species. At present, only sequence-defined alpha-peptides (e.g. polymyxin B) can selectively target Gram-negative bacterial lipopolysaccharides. We show that a copolymer, without a defined sequence, shows good potency against MDR Gram-negative bacteria including its biofilm form. The tapered blocky co-beta-peptide with controlled N-terminal hydrophobicity (#4) has strong interaction with the Gram-negative bacterial lipopolysaccharides via its backbone through electrostatic and hydrogen bonding interactions but not the Gram-positive bacterial and mammalian cell membranes so that this copolymer is non-toxic to these two latter cell types. The new #4 co-beta-peptide selectively kills Gram-negative bacteria with low cytotoxicity both in vitro and in a mouse biofilm wound infection model. This strategy provides a new concept for the design of Gram-negative selective antimicrobial peptidomimetics against MDR and biofilm species.

Development of Host-Cleavable Antibody-Bactericide Conjugates against Extracellular Pathogens.

Novel antimicrobial agents with potent bactericidal activity are needed to treat infections caused by multidrug-resistant (MDR) extracellular pathogens, such as Pseudomonas aeruginosa. Antimicrobial peptides (AMPs) and peptidomimetics are promising alternatives to traditional antibiotics, but their therapeutic use is limited due to the lack of specificity and resulting off-target effects. The incorporation of an antibody into the drug design would alleviate these challenges by localizing the AMP to the target bacterial cells. Antibody-drug conjugates (ADCs) have already achieved clinical success as anticancer therapeutics, due to the ability of the antibody to deliver the payload directly to the cancer cells. This strategy involves the selective delivery of highly cytotoxic drugs to the target cells, which enables a broad therapeutic window. This platform can be translated to the treatment of infections, whereby an antibody is used to deliver an antimicrobial agent to the bacterial antigen. Herein, we propose the development of an antibody-bactericide conjugate (ABC) in which the antibacterial oligothioetheramide (oligoTEA), BDT-4G, is coupled to an anti-P. aeruginosa antibody via a cleavable linker. The drug BDT-4G was chosen based on its efficacy against a range of P. aeruginosa isolates and its ability to evade mechanisms conferring resistance to the last-resort agent polymyxin B. We demonstrate that the ABC binds to the bacterial cell surface, and following cleavage of the peptide linker, the oligoTEA payload is released and exhibits antipseudomonal activity.

Design, synthesis, and biological evaluation of tetrahydroquinoline amphiphiles as membrane-targeting antimicrobials against pathogenic bacteria and fungi

The rising prevalence of drug-resistant pathogens is one of the biggest threats to human health. The development of new antibiotics that can overcome drug resistance is in urgent need. Herein, we designed and synthesized a series of amphiphilic tetrahydroquinoline derivatives as small-molecule-based antimicrobial peptidomimetics. Two lead compounds 36 and 52 which contained the tetrahydroquinoline core, hydrophobic alkyl chains (n-nonyl or isoprenyl group), different spacer lengths (n = 4 or 8), and cationic guanidine moiety, showed poor hemolytic activity, low cytotoxicity, and potent broad-spectrum antimicrobial activity against Gram-positive and Gram-negative bacteria, as well as fungi. The further biological evaluation revealed that compounds 36 and 52 can kill bacteria and fungi rapidly via membrane-targeting action and avoid drug resistance development. More importantly, compounds 36 and 52 exhibited similarly potent in vivo antimicrobial activities in a murine corneal infection caused by Staphylococcus aureus ATCC29213 or Pseudomonas aeruginosa ATCC9027, as compared to vancomycin or gatifloxacin. These results suggest that compounds 36 and 52 have great potential as new broad-spectrum antimicrobial agents to combat microbial resistance.

Anti-persister and Anti-biofilm Activity of Self-Assembled Antimicrobial Peptoid Ellipsoidal Micelles.

Although persister cells are the root cause of resistance development and relapse of chronic infections, more attention has been focused on developing antimicrobial agents against resistant bacterial strains than on developing anti-persister agents. Frustratingly, the global preclinical antibacterial pipeline does not include any anti-persister drug. Therefore, the central point of this work is to explore antimicrobial peptidomimetics called peptoids (sequence-specific oligo-N-substituted glycines) as a new class of anti-persister drugs. In this study, we demonstrate that one particular antimicrobial peptoid, the sequence-specific pentamer TM5, is active against planktonic persister cells and sterilizes biofilms formed by both Gram-negative and Gram-positive bacteria. Moreover, we demonstrate the potential of TM5 to inhibit cytokine production induced by lipopolysaccharides from Gram-negative bacteria. We anticipate that this work can pave the way to the development of new anti-persister agents based on antimicrobial peptoids of this class to simultaneously help address the crisis of bacterial resistance and reduce the occurrence of the relapse of chronic infections.

Improving the Hemocompatibility of Antimicrobial Peptidomimetics through Amphiphilicity Masking Using a Secondary Amphiphilic Polymer.

Antimicrobial peptidomimetics (AMPMs) have received widespread attention as potentially powerful weapons against antibiotic resistance. However, AMPMs' membrane disruption mechanism not only brings resistance-resistant nature, but also nonspecific binding and disruption toward eukaryotic cell membranes, and consequently, their hemolytic activity is the primary concern on clinical applications. Here, the preparation and screening of an AMPM library is reported, through which a best-performing hit, PT-b1, can be obtained. To further improve PT-b1's hemocompatibility, a strategy is devised to mask the amphiphilicity of the AMPM using a charge-free, FDA-approved amphiphilic polymer, Pluronic F-127 (PF127). A PF127 solution containing PT-b1 can form a temperature-sensitive, absorbable hydrogel at higher concentration, but dissolve and complex with PT-b1 through hydrophobic interactions at lower concentration or lower temperature. The complexation from PF127 can mask the amphiphilicity of PT-b1 and render it extremely hemocompatible, yet the reversibility in such nanocomplexation and the existence of a secondary mechanism of action ensure that the AMPM's potency remains unchanged. The in vivo effectiveness of this antimicrobial hydrogel system is demonstrated using a mice wound infection model established with Methicillin-resistant Staphylococcus aureus, and observations indicate the hydrogel can promote wound healing and suppress bacteria-caused inflammation even when resistant pathogens are involved.

Synthesis of diethanolamine-based amino acid derivatives with symmetric and asymmetric radicals in their hydrophobic domain and potential antimicrobial activity

Objectives. Resistance to antibiotics and other antimicrobial drugs is an acute problem in the world today. Therefore, the chemical and pharmaceutical industries are still in search of new antibacterial agents that can overcome the resistance of pathogenic bacterial strains. To date, it has been established that molecules with antimicrobial activity must have an amphiphilic nature, a small size, one or more positive charges, and the required degree of hydrophobicity, that is, a significant hydrophilic–lipophilic balance (HLB) value. Some examples of such structures are antimicrobial peptides or peptidomimetics. This study aimed to develop a universal scheme for synthesizing several amino acid derivatives based on diethanolamine diesters with symmetric and asymmetric radicals in a hydrophobic block and potential antibacterial activity.Methods. The progression of chemical reactions was analyzed using thin-layer chromatography (TLC) on Sorbfil plates. The obtained compounds were isolated and purified using preparative TLC on Kieselgel (Merck) 60 F254 plates and column chromatography on Merck silica gel 0.040–0.063 mm. The TLC method was used to detect substances using a 3% ninhydrin solution, followed by heating to 70 °C. The structures of the obtained compounds were confirmed by hydrogen-1 nuclear magnetic resonance (1H NMR) spectroscopy on a Bruker WM-300 pulse NMR spectrometer, with hexamethyldisiloxane serving as the internal standard.Results. The HLB values of the diethanolamine derivatives were calculated, and samples were selected for subsequent synthesis. A scheme was developed for preparing amino acid derivatives based on diethanolamine diesters with symmetric and asymmetric radicals in the hydrophobic domain, and five new compounds were synthesized. The hydrophilic blocks of these compounds included residues of amino acids such as glycine, β-alanine, L-ornithine, and L-lysine.Conclusions. The potential antimicrobial activity of the synthesized peptidomimetics was assessed by their HLB values using the ACD/Labs Log P program. New amphiphiles were synthesized using amino acids and diethanolamine, and their structures were confirmed by 1H NMR spectroscopy data. The synthesized compounds were prepared for antibacterial activity analysis.

Bioinspired Polydopamine Coatings Facilitate Attachment of Antimicrobial Peptidomimetics with Broad-Spectrum Antibacterial Activity.

The prevention and treatment of biofilm-mediated infections remains an unmet clinical need for medical devices. With the increasing prevalence of antibiotic-resistant infections, it is important that novel approaches are developed to prevent biofilms forming on implantable medical devices. This study presents a versatile and simple polydopamine surface coating technique for medical devices, using a new class of antibiotics—antimicrobial peptidomimetics. Their unique mechanism of action primes them for activity against antibiotic-resistant bacteria and makes them suitable for covalent attachment to medical devices. This study assesses the anti-biofilm activity of peptidomimetics, characterises the surface chemistry of peptidomimetic coatings, quantifies the antibacterial activity of coated surfaces and assesses the biocompatibility of these coated materials. X-ray photoelectron spectroscopy and water contact angle measurements were used to confirm the chemical modification of coated surfaces. The antibacterial activity of surfaces was quantified for S. aureus, E. coli and P. aeruginosa, with all peptidomimetic coatings showing the complete eradication of S. aureus on surfaces and variable activity for Gram-negative bacteria. Scanning electron microscopy confirmed the membrane disruption mechanism of peptidomimetic coatings against E. coli. Furthermore, peptidomimetic surfaces did not lyse red blood cells, which suggests these surfaces may be biocompatible with biological fluids such as blood. Overall, this study provides a simple and effective antibacterial coating strategy that can be applied to biomaterials to reduce biofilm-mediated infections.

Multivalent Display of Lipophilic DNA Binders for Dual-Selective Anti-Mycobacterium Peptidomimetics with Binary Mechanism of Action

Multivalent Display of Lipophilic DNA Binders for Dual-Selective Anti-Mycobacterium Peptidomimetics with Binary Mechanism of Action

Natural and Synthetic Halogenated Amino Acids-Structural and Bioactive Features in Antimicrobial Peptides and Peptidomimetics.

The 3D structure and surface characteristics of proteins and peptides are crucial for interactions with receptors or ligands and can be modified to some extent to modulate their biological roles and pharmacological activities. The introduction of halogen atoms on the side-chains of amino acids is a powerful tool for effecting this type of tuning, influencing both the physico-chemical and structural properties of the modified polypeptides, helping to first dissect and then rationally modify features that affect their mode of action. This review provides examples of the influence of different types of halogenation in amino acids that replace native residues in proteins and peptides. Examples of synthetic strategies for obtaining halogenated amino acids are also provided, focusing on some representative compounds and their biological effects. The role of halogenation in native and designed antimicrobial peptides (AMPs) and their mimetics is then discussed. These are in the spotlight for the development of new antimicrobial drugs to counter the rise of antibiotic-resistant pathogens. AMPs represent an interesting model to study the role that natural halogenation has on their mode of action and also to understand how artificially halogenated residues can be used to rationally modify and optimize AMPs for pharmaceutical purposes.

Synthesis and biological evaluation of indole-based peptidomimetics as antibacterial agents against Gram-positive bacteria

The emergence of bacterial multidrug resistance and the lack of new antimicrobial agents urgently demand the discovery and development of novel antibacterials that avoid bacterial resistance. Antimicrobial peptidomimetics represent a promising approach for overcoming antibiotic resistance. Herein we report the synthesis and evaluation of indole-based amphiphilic antimicrobial peptidomimetics, bearing hydrophobic side chains and hydrophilic cationic moieties. Among these derivatives, compound 28 demonstrated potent antimicrobial activity against Gram-positive bacteria, low hemolytic activity and low toxicity towards mammalian cells, as well as good stability in salt conditions. Moreover, compound 28 showed the rapid killing of bacteria via membrane-targeting action without developing bacterial resistance. More importantly, compound 28 displayed high antimicrobial potency against Gram-positive bacteria in a murine model of bacterial keratitis, and was found to be more efficient than vancomycin. Thus, compound 28 had great potential as a promising lead compound for the treatment of Gram-positive bacterial infection.

Polyphenylglyoxamide-Based Amphiphilic Small Molecular Peptidomimetics as Antibacterial Agents with Anti-Biofilm Activity.

The rapid emergence of drug-resistant bacteria is a major global health concern. Antimicrobial peptides (AMPs) and peptidomimetics have arisen as a new class of antibacterial agents in recent years in an attempt to overcome antibiotic resistance. A library of phenylglyoxamide-based small molecular peptidomimetics was synthesised by incorporating an N-alkylsulfonyl hydrophobic group with varying alkyl chain lengths and a hydrophilic cationic group into a glyoxamide core appended to phenyl ring systems. The quaternary ammonium iodide salts 16d and 17c showed excellent minimum inhibitory concentration (MIC) of 4 and 8 μM (2.9 and 5.6 μg/mL) against Staphylococcus aureus, respectively, while the guanidinium hydrochloride salt 34a showed an MIC of 16 μM (8.5 μg/mL) against Escherichia coli. Additionally, the quaternary ammonium iodide salt 17c inhibited 70% S. aureus biofilm formation at 16 μM. It also disrupted 44% of pre-established S. aureus biofilms at 32 μM and 28% of pre-established E. coli biofilms 64 μM, respectively. A cytoplasmic membrane permeability study indicated that the synthesised peptidomimetics acted via disruption and depolarisation of membranes. Moreover, the quaternary ammonium iodide salts 16d and 17c were non-toxic against human cells at their therapeutic dosages against S. aureus.

Inoculum effect of antimicrobial peptides

The activity of many antibiotics depends on the initial density of cells used in bacterial growth inhibition assays. This phenomenon, termed the inoculum effect, can have important consequences for the therapeutic efficacy of the drugs, because bacterial loads vary by several orders of magnitude in clinically relevant infections. Antimicrobial peptides are a promising class of molecules in the fight against drug-resistant bacteria because they act mainly by perturbing the cell membranes rather than by inhibiting intracellular targets. Here, we report a systematic characterization of the inoculum effect for this class of antibacterial compounds. Minimum inhibitory concentration values were measured for 13 peptides (including all-D enantiomers) and peptidomimetics, covering more than seven orders of magnitude in inoculated cell density. In most cases, the inoculum effect was significant for cell densities above the standard inoculum of 5 × 105 cells/mL, while for lower densities the active concentrations remained essentially constant, with values in the micromolar range. In the case of membrane-active peptides, these data can be rationalized by considering a simple model, taking into account peptide-cell association, and hypothesizing that a threshold number of cell-bound peptide molecules is required in order to cause bacterial killing. The observed effect questions the clinical utility of activity and selectivity determinations performed at a fixed, standardized cell density. A routine evaluation of the dependence of the activity of antimicrobial peptides and peptidomimetics on the inoculum should be considered.

Chemically modified and conjugated antimicrobial peptides against superbugs.

Antimicrobial resistance (AMR) is one of the greatest threats to human health that, by 2050, will lead to more deaths from bacterial infections than cancer. New antimicrobial agents, both broad-spectrum and selective, that do not induce AMR are urgently required. Antimicrobial peptides (AMPs) are a novel class of alternatives that possess potent activity against a wide range of Gram-negative and positive bacteria with little or no capacity to induce AMR. This has stimulated substantial chemical development of novel peptide-based antibiotics possessing improved therapeutic index. This review summarises recent synthetic efforts and their impact on analogue design as well as their various applications in AMP development. It includes modifications that have been reported to enhance antimicrobial activity including lipidation, glycosylation and multimerization through to the broad application of novel bio-orthogonal chemistry, as well as perspectives on the direction of future research. The subject area is primarily the development of next-generation antimicrobial agents through selective, rational chemical modification of AMPs. The review further serves as a guide toward the most promising directions in this field to stimulate broad scientific attention, and will lead to new, effective and selective solutions for the several biomedical challenges to which antimicrobial peptidomimetics are being applied.

Design, synthesis, and evaluation of amphiphilic sofalcone derivatives as potent Gram-positive antibacterial agents

New antimicrobial agents are urgently needed to overcome drug-resistant bacterial infections. Here we describe the design, synthesis and evaluation of a new class of amphiphilic sofalcone compounds as antimicrobial peptidomimetics. The most promising compound 14, bearing two arginine residues, showed poor hemolytic activity, low cytotoxicity, and excellent antimicrobial activity against Gram-positive bacteria, including MRSA. Compound 14, had good stability in various salt conditions, killed bacteria rapidly by directly disrupting bacterial cell membranes and was slow at developing bacterial resistance. Additionally, compound 14 exhibited effective in vivo efficacy in the murine model of bacterial keratitis caused by Staphylococcus aureus ATCC29213. Our studies suggested that compound 14 possessed promising potential to be used as a novel antimicrobial agent to combat drug-resistant Gram-positive bacteria.