Anthropogenic Particles Research Articles

Snow as an Indicator of Atmospheric Transport of Anthropogenic Particles (Microplastics and Microfibers) from Urban to Arctic Regions

We report anthropogenic particles (AP) > 100μm, including microplastics and microfibers, from 70 surface snow samples collected from the urban Greater Toronto Area (GTA), remote and sparsely inhabited regions in the Yukon and Northwest Territories, and the unpopulated high Arctic. Concentrations and proportions of particles of anthropogenic origin were conservatively estimated after blank and ‘anthropogenic origin’ corrections were performed based on visual analysis and micro-Fourier transform infrared spectroscopy (µFTIR). AP were dominated by microfibers (95-100%), with variable concentrations across and within regions. Microfibers were distinguished as synthetic, regenerated semi-synthetic, anthropogenically modified cellulosic, and natural cellulosic or proteinaceous. Among microfibers with confirmed anthropogenic origin, most were polyester/PET (8-22%) and semi-synthetic rayon (1-18%), with anthropogenic cellulose comprising a small proportion (3-7%) across all regional areas. Greater diversity of coloured non-fibrous particles (fragments, films and foams) in settled regions (i.e., GTA and Carcross, Yukon) suggests direct input from local sources. Back trajectory analyses performed for days leading up to sample collection showed high frequency transport (>10%) from population centres exceeding 200km distance. Our findings of APs in snow from uninhabited areas support the hypothesis that APs, especially microfibers, undergo long-range atmospheric transport whereby snow can scavenge and deposit APs in remote northern regions.

Study of Microplastic Accumulation in Halophyte Plants and Macroalgae: a New Window for Analytical Research

Marine litter and microplastic pollution pose significant threats to aquatic ecosystems. The interrelationship between halophyte plants and micro/nanoplastics began to attract attention in recent years. Halophyte plants and maritime macroalgae can trap substantial amounts of marine debris leading to areas of accumulation, known as ‘sinks’, of anthropogenic particles. The review of existing studies reveals that halophyte plants can serve as sinks for micro/nanoplastics by absorbing them on their surface, moreover, these plastics can be internalized by plants. Plastics on the surfaces and within plant tissue can cause various harmful effects. The present review outlines the current knowledge on microplastic abundance, bioavailability, influencing factors, technological detection, and potential salt-tolerant plants for bioremediation. Based on these findings, we recommend the inclusion of microplastic on halophyte plants and algae in prospective monitoring studies, discuss appropriate methods, and propose to conduct exposure studies along with risk assessments, strategies for preventing and controlling policies of these underestimated pollutants in vegetated coastal ecosystems and reaches a basis for future research.

Assessment of anthropogenic particles in Holothuria sanctori from Tenerife (Canary Islands, Spain)

Sea cucumbers play a key role in maintaining the health of coastal marine ecosystems. The aim of this research was to evaluate the presence of anthropogenic particles in sea cucumbers of the species Holothuria sanctori in intertidal pools from Tenerife (Canary Islands, Spain) and in the surrounding seawater. In the case of sea cucumbers (n = 18), the gastrointestinal tract (particles ingested directly from the sediment) and Cuvierian tubules (particles presence as a result of gas exchange with seawater) were analysed separately. Anthropogenic particles were found in all samples, with an average concentration of 20.0 ± 4.4 items per litre in seawater and 11.8 ± 3.9 items per individual in the sea cucumbers, with a higher concentration of particles in the gastrointestinal tract (9.3 ± 3.4 items per gastrointestinal tract) than in the Cuvierian tubules (2.6 ± 3.3 items per Cuvierian tubules). Transparent and blue microfibres were predominant, accounting for over 90 % of the samples analysed. A significant proportion of these fibres were of cellulosic origin (either natural or semisynthetic, comprising 78.7 %), while fully synthetic polymers (microplastics), were also identified, including polyester and polyvinyl chloride (the latter exclusively detected in seawater).

Contamination of consumer composts by metals, microplastics and other microscopic debris.

Very little information exists on the particle and chemical contamination of consumer (horticultural) composts. In this study, anthropogenic microcellulosics (AMCs), microplastics (MPs) and other microscopic debris, along with anthropogenically impacted metals (Cu, Zn, Pb), have been determined in 12 composts (seven garden composts and five growbags) purchased at outlets in the UK. AMCs and MPs, determined microscopically, were present in all samples at up to about 1100kg-1 dw. AMCs were more abundant and were dominated by fibres constructed of rayon and cotton, while petroleum-based MPs exhibited a greater diversity in shape and polymeric construction (including polyolefins, polyethylene terephthalate, polyvinyl chloride, resins, paints and rubbers). Other microdebris, present in much smaller concentrations in the composts, consisted of fragments of glass, metal and machined wood and spherical glass beads. Concentrations of the anthropogenically impacted metals, Cu, Pb and Zn, determined directly by energy-dispersive X-ray fluorescence spectrometry, were heterogeneously distributed and averaged 52.4, 192 and 51.6mgkg-1 dw, respectively. Although concentrations of anthropogenic particles were not related to cost or type of compost, physico-chemical properties or metal concentrations, a significant relationship between Pb content and particle diversity (number of polymers and debris types) was established. This relationship might result from the general contamination of the environment by both Pb and anthropogenic particulates, or the association of the metal with various types of material (e.g. paints, polyvinyl chloride, glass). Despite the ubiquity and diversity of MPs and microdebris in consumer composts, an understanding of their impacts on plant growth, either directly or indirectly (e.g. by interacting with metals), is unknown.

Assessment of the contamination by carbonaceous anthropogenic particulates and polycyclic aromatic hydrocarbons (PAHs) concentration in recreational areas of an estuary heavily industrialized in Northern Spain

The commercial management of coal and its by-products has the potential to negatively impact natural coastal environments. The coal conversion processes and coke production are sources of polycyclic aromatic hydrocarbons (PAHs) emissions that also contribute to the pollution of those aquatic environments. This research assesses the contamination by carbonaceous anthropogenic particles and by polycyclic aromatic hydrocarbons of some recreational sites (Arañón, Peña del Caballo and San Balandrán area) located in the Avilés' estuary, an area in Northern Spain that has been heavily industrialized since the 1950s. The results obtained indicate a low concentration of solid organic anthropogenic particles in the intertidal sediments of the recreational sites in the estuary, probably due to the protective measures set in place at the facilities managing bulk coal and coke, which prevents the dispersion of coal dust (and other materials) as well as the eventual failure into the estuary. The characteristics of 16 priority pollutants PAHs analyzed in two recreational sites of the estuary (San Balandrán area), their distribution by aromatic ring number together with their diagnostic ratios demonstrate a pyrogenic nature with a main source from processes of coal and coke conversion (including combustion) in the facilities around the estuary. Some contribution of PAHs derived from petroleum cannot be ruled out. This contamination by PAHS is constant and sustained over time. The majority of the considered PAHs are well above the Spanish Generic Reference Level, (GRL) established for “protection of ecosystems with aquatic organisms”, and only a few of them are notably above the corresponding Spanish GRL established for “other uses of land”, which should include lands for recreational activities. The analysis of the potential toxicity risk of PAHs for human health and the organisms of the aquatic ecosystem suggests a relatively low toxicity risk to very high toxicity risk in the San Balandrán environment according to the concentration and distribution trend of PAHs identified in this area. This trend is dependent on the coastal dynamics and the protection level of the site, which also affect the distribution of the anthropogenic carbonaceous particulates in the same way.

Physiological and molecular effects of contaminants of emerging concerns of micro and nano-size in aquatic metazoans: overview and current gaps in Antarctic species.

Although Antarctica is the most isolated continent on Earth, its remote location does not protect it from the impacts of human activities. Antarctic metazoans such as filter-feeding invertebrates are a crucial component of the Antarctic benthos. They play a key role in the benthic-pelagic carbon flux in coastal areas by filtering particles and planktonic organisms from the sediment-water interface. Due to their peculiar ecological niche, these organisms can be considered a wasp-waist in the ecosystem, making them highly sensitive to marine pollution. Recently, anthropogenic particles such as micro-nanoplastics and manufactured nanoparticles (MNP) have been classified as contaminants of emerging concern (CEC) due to their small size range, which also overlaps with the preferred particle size ingested by aquatic metazoans. Indeed, it has been demonstrated that some species such as Antarctic krill can ingest, transform, and release MNPs, making them newly bioavailable for other Antarctic filter-feeding organisms. Similarly, the production and use of anthropogenic MNP are rapidly increasing, leading to a growing presence of materials, such as nano-sized metal-oxides, in the environment. For these reasons, it is important to provide evidence of the adverse effects of such emerging contaminants at sub-lethal concentrations in environmental risk assessments. These contaminants may cause cascade effects with consequences not only on individuals but also at the community and ecosystem levels. In this review, we discuss the state-of-the-art knowledge on the physiological and molecular effects of anthropogenic MNP in Antarctic aquatic metazoans. We further highlight the importance of identifying early biomarkers using sessile metazoans as sentinels of environmental health.

Microplastic abundance in the semi-enclosed Osaka Bay, Japan.

Anthropogenic particles in sea surface water of the semi-enclosed Osaka Bay were identified using stereomicroscopy, classified according to polymer type using Fourier-transform infrared spectroscopy (FTIR), and categorized according to their physical characteristics. A total of 565.1 particles were detected in the water samples. However, plastic particles accounted for only 22.4% of the particles. Microplastic abundance in Osaka Bay showed seasonal variance from 8.9 ± 1.4 (in May) to 22.8 ± 6.5 particles/L (in July), which is consistent with previous reports in other semi-enclosed bays. Microplastics were mainly fragmented and fiber shaped, with gray and colorless/white coloration. The dominant polymer types were polypropylene, poly(methylmethacrylate), polyester, polyethylene, and polyethylene terephthalate. Generally, there were considerably higher abundances of microplastics at offshore sites compared with nearshore sites. The results of this study suggest that local river effluents and marine-related activities are probable sources of microplastics in Osaka Bay.

Anthropogenic particles determination in northern krill (Meganyctiphanes norvegica) from the Azores region: A keystone species for marine food webs

Plastic pollution poses a significant threat to marine ecosystems. Microfibres from fabrics have become the most prevalent shape of microplastic found in the marine environment. The northern krill (Meganyctiphanes norvegica) is the most abundant euphausiid species in the northern hemisphere, playing a crucial role in various pelagic ecosystems. Anthropogenic microparticles in northern krill was assessed for the first time in samples collected in the Azores on two occasions - April 2019 (n = 480) and April 2023 (n = 480). Analysis of all individuals revealed 533 anthropogenic particles, with an average abundance of 0.56 ± 0.14 items per individual and, no significant differences between years. Microfibres were the most common shape (94.8 %), with the remaining items being fragments (5.2 %), and blue and black were the predominant colours. MicroFourier transform infrared spectroscopy analysis (μFTIR) of 22.1 % of the total number of particles, showed that they were mainly cellulosic (65.3 %) - either natural or semisynthetic - followed by polyester (7.6 %). Our finding of microplastics in the northern krill raises important questions due to its crucial role in marine food webs. The intake of anthropogenic particles, particularly those that are 100 % synthetic, suggests that the northern krill may act as a transfer vector of these pollutants to higher trophic levels.

Microplastics and Anthropogenic Particles in Recreationally Caught Freshwater Fish from an Urbanized Region of the North American Great Lakes.

Microplastics are a pervasive contaminant cycling through food webs-leading to concerns regarding exposure and risk to humans. We aimed to quantify and characterize anthropogenic particle contamination (including microplastics) in fish caught for human consumption from the Humber Bay region of Lake Ontario. We related quantities of anthropogenic particles to other factors (e.g., fish size) that may help in understanding accumulation of microplastics in fish. A total of 45 samples of six fish species collected from Humber Bay in Lake Ontario near Toronto, Ontario, Canada, were examined for anthropogenic particles in their gastrointestinal (GI) tracts and fillets. Using microscopy and spectroscopy, suspected anthropogenic particles were identified and characterized. We observed anthropogenic particles in the GI tracts and fillets of all species. Individual fish had a of anthropogenic particles, with a single fish containing up to 1,508 particles. GI tracts had particles/fish ( particles/gram), and fillets had particles/fish ( particles/gram). Based on a consumption rate of 2 servings/week, the average yearly human exposure through the consumption of these fish fillets would be particles. Our findings suggest that consumption of recreationally caught freshwater fish can be a pathway for human exposure to microplastics. The elevated number of particles observed in fish from Humber Bay highlights the need for large-scale geographic monitoring, especially near sources of microplastics. Currently, it is unclear what the effects of ingesting microplastics are for humans, but given that recreationally caught freshwater fish are one pathway for human exposure, these data can be incorporated into future human health risk assessment frameworks for microplastics. https://doi.org/10.1289/EHP13540.

Characteristics of Anthropogenic Pollution in the Atmospheric Air of South-Western Svalbard (Hornsund, Spring 2019)

The character of atmospheric pollution and its impact on surface waters may vary substantially in space, and hence, we add a potentially important location for the studies of atmospheric air pollution to the map of the High Arctic. We have investigated the anthropogenic particle characteristics and selected persistent organic pollutant concentrations, in a priorly unmonitored location in the Arctic (Svalbard), exposed to a climatic gradient. Single-particle analysis of PM indicates that besides the prevailing natural aerosol particles, anthropogenic ones were present. The likely anthropogenic origin of some particles was established for spherical Fe-rich or aluminosilicate particles formed in high-temperature processes or metal-rich particles of the chemical composition corresponding to industrial products and atypical for natural minerals; soot, tar balls, and secondary sulfate were also likely of anthropogenic origin. Some of the observed anthropogenic particles could only come from remote industrial sources. POP concentrations indicated a background of LRAT, consistent with the ΣPCB concentrations and volatility profile. However, the ΣDDX composition indicating aged sources and an order of magnitude higher concentrations of both ΣDDXs and ΣHCHs than at other High Arctic monitoring stations indicate their potential source in two types of re-emission from secondary sources, i.e., from seawater and snowpack, respectively.

Cosmic dust impacts on the Hubble Space Telescope.

Exposure of the Hubble Space Telescope to space in low Earth orbit resulted in numerous hypervelocity impacts by cosmic dust (micrometeoroids) and anthropogenic particles (orbital debris) on the solar arrays and the radiator shield of the Wide Field and Planetary Camera 2, both subsequently returned to Earth. Solar cells preserve residues from smaller cosmic dust (and orbital debris) but give less reliable information from larger particles. Here, we present images and analyses from electron, ion and X-ray fluorescence microscopes for larger impact features (millimetre- to centimetre-scale) on the radiator shield. Validated by laboratory experiments, these allow interpretation of composition, probable origin and likely dimensions of the larger impactors. The majority (~90%) of impacts by grains greater than 50 μm in size were made by micrometeoroids, dominated by magnesium- and iron-rich silicates and iron sulfides, metallic iron-nickel and chromium-rich spinel similar to that in ordinary chondrite meteorites of asteroid origin. Our re-evaluation of the largest impact features shows substantially fewer large orbital debris impacts than reported by earlier authors. Mismatch to the NASA ORDEM and ESA MASTER models of particle populations in orbit may be partly due to model overestimation of orbital debris flux and underestimation of larger micrometeoroid numbers. This article is part of the theme issue 'Dust in the Solar System and beyond'.

Anthropogenic particle abundance and characteristics in seawater and intertidal sediments of the Tonkin Bay Coast (North Vietnam).

Microplastics (MPs, plastic items from 1µm to 5mm in size) are present in all environmental compartments. The evaluation of their concentration, fate, and spatial distribution is still a challenge for the scientific community. This concern is just debuting in developing countries, (i.e., Asia, South America, and Africa). This study deals with the MP contamination in the abiotic marine compartments of Northern Vietnam: seawater and intertidal sediments. Four sites located in the intertidal zone or near the coastline in Tonkin Bay, Vietnam were studied. A total of 16 samples (eight for each compartment) were collected in July 2020 (rainy season) and January 2021 (dry season). Anthropogenic particles (total observed fibers and fragments) were found at levels ranging from 3 to 303 particles/m3 in seawater and from 63 to 955 particles/kg dry weight in sediments. Most of these were fibers less than 300-µm long. Higher levels of seawater at the Nam Dinh site were found in the rainy season compared to the dry one. As the river flow was estimated six times higher during the rainy season than during the dry season, these results suggest the river discharge is a potential source of contamination for the coastal zone. The temporal variability was lower for the sediments than for the seawater, suggesting the long-term integration of the anthropogenic particles in this compartment. A small portion of sorted particles were analyzed by µFTIR (8.35%), and this sub-sample was only composed of fragments. Still, fragments were mostly composed of polypropylene (PP, 82%), polyethylene (PE, 9%), and polystyrene (PS, 9%). The fragment size was similar in the two studied compartments, but it was dependent on polymer types since PS fragments (140 ± 17µm) were smaller than those made of PE (622 ± 123µm) and PP (869 ± 905µm). Future works should investigate the smallest fraction of MP (even nanoplastics) as well as find solutions in order to mitigate MP contamination in the marine environment.

Trapping of microplastics and other anthropogenic particles in seagrass beds: Ubiquity across a vertical and horizontal sampling gradient

Seagrass beds can trap large amounts of marine debris leading to areas of accumulation, known as ‘sinks’, of anthropogenic particles. While the presence of vegetation can enhance accumulation, less is known about how the trapping effect changes from vegetated to less vegetated patches. To test this, vegetation and sediment were sampled along a vegetation percent cover gradient from the centre of seagrass beds to nearby less vegetated patches. To determine whether trapped particles can lead to increased accumulation in associated fauna, gastropods were also collected from the transects laid across this gradient. Extracted anthropogenic particles were counted and characterised. Particles were detected in all sample types and reached quantifiable limits in at least 50% of sediment and gastropod samples. There was no significant difference in the distribution of particles found in seagrass beds compared to less vegetated patches, suggesting other factors contribute to the trapping efficiency of biogenic habitats besides simply the presence or absence of vegetation.

Anthropogenic particle concentrations and fluxes in an urban river are temporally variable and impacted by storm events.

Anthropogenic particles (AP), which include microplastics and other synthetic, semisynthetic, and anthropogenically modified materials, are pollutants of concern in aquatic ecosystems worldwide. Rivers are important conduits and retention sites for AP, and time series data on the movement of these particles in lotic ecosystems are needed to assess the role of rivers in the global AP cycle. Much research assessing AP pollution extrapolates stream loads based on single time point measurements, but lotic ecosystems are highly variable over time (e.g., seasonality and storm events). The accuracy of models describing AP dynamics in rivers is constrained by the limited studies that examine how frequent changes in discharge drive particle retention and transport. This study addressed this knowledge gap by using automated, high-resolution sampling to track AP concentrations and fluxes during multiple storm events in an urban river (Milwaukee River) and comparing these measurements to commonly monitored water quality metrics. AP concentrations and fluxes varied significantly across four storm events, highlighting the temporal variability of AP dynamics. When data from the sampling periods were pooled, there were increases in particle concentration and flux during the early phases of the storms, suggesting that floods may flush AP into the river and/or resuspend particles from the benthic zone. AP flux was closely linked to river discharge, suggesting large loads of AP are delivered downstream during storms. Unexpectedly, AP concentrations were not correlated with other simultaneously measured water quality metrics, including total suspended solids, fecal coliforms, chloride, nitrate, and sulfate, indicating that these metrics cannot be used to estimate AP. These data will contribute to more accurate models of particle dynamics in rivers and global plastic export to oceans. PRACTITIONER POINTS: Anthropogenic particle (AP) concentrations and fluxes in an urban river varied across four storm events. AP concentrations and fluxes were the highest during the early phases of the storms. Storms increased AP transport downstream compared with baseflow. AP concentrations did not correlate with other water quality metrics during storms.

White Stork Pellets: Non-Invasive Solution to Monitor Anthropogenic Particle Pollution.

The present study applied a non-invasive method to analyse anthropogenic particles and prey items in white stork (Ciconia ciconia) pellets. Pellets (n = 20) were obtained from white stork nests during the 2020 breeding season from two sites in Croatia. In total, 7869 anthropogenic particles were isolated. The majority of particles were fragments, while previous studies on other birds often reported fibres. An ATR-FTIR polymer analysis detected glass and construction and building materials, as well as several compounds associated with plastic masses. Polymer investigation revealed the presence of dotriacontane and octacosane, which are by-products of polyethylene (PE) degradation and transformation. Additionally, the detection of vinylidene chloride (VDC) highlights the historical contribution of polyvinylidene chloride (PVDC) to plastic pollution. Significant variation in particle quantity and size between the sampling sites was detected, with larger particles found at sites associated with the metal mechanical engineering industry and agriculture. Prey assessment revealed chitin remains of large insects such as Orthoptera and Coleoptera. This research confirms the potential of pellet analysis as a valuable tool for assessing the presence of anthropogenic particles in the environment. However, further research is needed to fully understand the extent of particle ingestion, particle sources and potential impact.

Assessment of anthropogenic particles content in commercial beverages

Microplastic (MPs) pollution is a current global concern that is affecting all environmental compartments and food sources. In this work, anthropogenic particles occurrence (MPs and natural and synthetic cellulosic particles), have been determined in 73 beverages packed in different containers. Overall, 1521 anthropogenic particles were found, being the lowest occurrence in water samples (7.2 ± 10.1 items·L−1) while beer had the highest (95.5 ± 91.8 items·L−1). Colourless/white particles were the most detected followed by blue and red colours. The highest mean size was 783 ± 715 μm in soft drinks. Cellulosic, both natural and semisynthetic particles, were the composition mostly found but regarding plastic polymers, it was polyester. Phenoxy resin particles from the can coatings were also identified in all metal containers which indicates that leaching from the packaging may be happening. The total estimated daily intake were 0.077 and 0.159 items·kg−1 body weight (b.w.)·day−1 for children and adult population, respectively.

Chemical analysis of marine microdebris pollution in macroalgae from the coastal areas of Argentina

Marine microdebris (MDs, <5 mm) and mesodebris (MesDs, 5–25 mm), consist of various components, including microplastics (MPs), antifouling or anticorrosive paint particles (APPs), and metallic particles (Mmps), among others. The accumulation of these anthropogenic particles in macroalgae could have significant implications within coastal ecosystems because of the role of macroalgae as primary producers and their subsequent transfer within the trophic chain. Therefore, the objectives of this study were to determine the abundance of MDs and MesDs pollution in different species of macroalgae (P. morrowii, C. rubrum, Ulva spp., and B. minima) and in surface waters from the Southwest Atlantic coast of Argentina to evaluate the ecological damage. MDs and MesDs were chemically characterized using μ-FTIR and SEM/EDX to identify, and assess their environmental impact based on their composition and degree of pollution by MPs, calculating the Polymer Hazard Index (PHI). The prevalence of MDs was higher in foliose species, followed by filamentous and tubular ones, ranging from 0 to 1.22 items/g w.w. for MPs and 0 to 0.85 items/g w.w. for APPs. It was found that macroalgae accumulate a higher proportion of high-density polymers like PAN and PES, as well as APPs based on alkyd, PMMA, and PE resins, whereas a predominance of CE was observed in surrounding waters. Potentially toxic elements, such as Cr, Cu, and Ti, were detected in APPs and MPs, along with the presence of epiplastic communities on the surface of APPs. According to PHI, the presence of high hazard score polymers, such as PAN and PA, increased the overall risk of MP pollution in macroalgae compared to surrounding waters. This study provided a baseline for MDs and MesDs abundance in macroalgae as well as understanding the environmental impact of this debris and their bioaccumulation in the primary link of the coastal trophic chain.

Accumulation of microplastics in predatory birds near a densely populated urban area

The pollution due to plastic and other anthropogenic particles has steadily increased over the last few decades, presenting a significant threat to the environment and organisms, including avian species. This research aimed to investigate the occurrence of anthropogenic pollutants in the digestive and respiratory systems of four birds of prey: Common Buzzard (Buteo buteo), Black Kite (Milvus migrans), Eurasian Sparrowhawk (Accipiter nisus), and Northern Goshawk (Accipiter gentilis). The results revealed widespread contamination in all species with microplastics (MPs) and cellulosic anthropogenic fibers (AFs), with an average of 7.9 MPs and 9.2 AFs per specimen. Every digestive system contained at least one MP, while 65 % of specimens exhibited MPs in their respiratory systems. This is the work reporting a high incidence of MPs in the respiratory system of birds, clearly indicating inhalation as a pathway for exposure to plastic pollution. The content of MPs and AFs varied significantly when comparing specimens collected from central Madrid with those recovered from other parts of the region, including rural environments, suburban areas, or less populated cities. This result aligns with the assumption that anthropogenic particles disperse from urban centers to surrounding areas. Additionally, the dominant particle shape consisted of small-sized fibers (> 98 %), primarily composed of polyester, polyethylene, acrylic materials, and cellulose fibers exhibiting indicators of industrial treatment. These findings emphasize the necessity for further research on the impact of plastic and other anthropogenic material contamination in avian species, calling for effective strategies to mitigate plastic pollution.

Modelling microplastic bioaccumulation and biomagnification potential in the Galápagos penguin ecosystem using Ecopath and Ecosim (EwE) with Ecotracer.

Bioaccumulation and biomagnification of anthropogenic particles are crucial factors in assessing microplastic impacts to marine ecosystems. Microplastic pollution poses a significant threat to iconic and often endangered species but examining their tissues and gut contents for contaminant analysis via lethal sampling is challenging due to ethical concerns and animal care restrictions. Incorporating empirical data from prey items and fecal matter into models can help trace microplastic movement through food webs. In this study, the Galápagos penguin food web served as an indicator species to assess microplastic bioaccumulation and biomagnification potential using trophodynamic Ecopath with Ecosim (EwE) modelling with Ecotracer. Empirical data collected from surface seawater near Galápagos penguin colonies, zooplankton, penguin prey, and penguin scat in October 2021 were used to inform the ecosystem model. Multiple scenarios, including a 99% elimination rate, were employed to assess model sensitivity. Model predictions revealed that microplastics can bioaccumulate in all predator-prey relationships, but biomagnification is highly dependent on the elimination rate. It establishes the need for more research into elimination rates of different plastics, which is a critical missing gap in current microplastic ecotoxicological and bioaccumulation science. Compared to empirical data, modelling efforts underpredicted microplastic concentrations in zooplankton and over-predicted concentrations in fish. Ultimately, the ecosystem modelling provides novel insights into potential microplastics' bioaccumulation and biomagnification risks. These findings can support regional marine plastic pollution management efforts to conserve native and endemic species of the Galápagos Islands and the Galápagos Marine Reserve.

Seasonal Variations in Anthropogenic and Natural Particles Induced by Rising CO2 Levels

Using an aerosol–climate coupled model, this paper has investigated the changes in distributions of anthropogenic and natural particles due to 4 × CO2-induced global warming, under the low emission scenario of Representative Concentration Pathway 4.5 (RCP4.5). Special attention is paid to the seasonal variations of aerosol size modes. With rising CO2 levels, surface warming, and changes in atmospheric circulations and hydrologic cycles are found during both summer (JJA) and winter (DJF). For anthropogenic particles, changes in fine anthropogenic particulate matter (PM2.5, particles with diameters smaller than 2.5 μm) decrease over high-latitude regions and increase over the tropics in both DJF and JJA. Global mean column concentrations of PM2.5 decrease by approximately 0.19 mg m−2, and concentrations of coarse anthropogenic particles (CPM, particles with diameters larger than 2.5 μm) increase by 0.005 mg m−2 in JJA. Changes in anthropogenic particles in DJF are similar to those in JJA, but the magnitudes of maximum regional changes are much smaller than those in JJA. The coarse anthropogenic particles (CPM, particles with diameters larger than 2.5 μm) increase over northern Africa and the Arabian Peninsula during JJA, whereas changes in anthropogenic CPM during DJF are minimal. During both JJA and DJF, changes in anthropogenic CPM are about two orders of magnitude smaller than those of anthropogenic PM2.5. Enhanced wet deposition by large-scale precipitation under rising CO2-induced surface warming is the critical factor affecting changes in anthropogenic particles. For natural particles, the distribution of change in the natural PM2.5 burden is similar to that of natural CPM, but much larger than natural CPM during each season. Both natural PM2.5 and CPM burdens increase over northern Africa and the Arabian Peninsula during JJA, but decrease over most of the continental regions during DJF. Changes in surface wind speed, divergence/convergence of surface wind, and precipitation are primary reasons for the variation of natural particles.