Anteroposterior View Research Articles

Revisiting the radiological signs for the first metatarsal pronation assessment.

The first metatarsal pronation deformity of hallux valgus feet is widely recognized. However, its assessment relies mostly on 3D standing CT scans. Two radiological signs, the first metatarsal round head (RH) and inferior tuberosity position (ITP), have been described, but are seldom used to aid in diagnosis. This study was undertaken to determine the reliability and validity of these two signs for a more convenient and affordable preoperative assessment and postoperative comparison. A total of 200 feet were randomly selected from the radiograph archives of a foot and ankle clinic. An anteroposterior view of both feet was taken while standing on the same x-ray platform. The intermetatarsal angle (IMA), metatarsophalangeal angle (MPA), medial sesamoid position, RH, and ITP signs were assessed for statistical analysis. There were 127 feet with an IMA > 9°. Both RH and ITP severities correlated significantly with IMA severity. RH and ITP were also significantly associated with each other, and the pronation deformities of these feet are probably related to extrinsic factors. There were also feet with discrepancies between their RH and ITP severities, possibly due to intrinsic torsion of the first metatarsal. Both RH and ITP are reliable first metatarsal pronation signs correlating to the metatarsus primus varus deformity of hallux valgus feet. They should be used more for preoperative and postoperative assessment.

Dual-Fluoroscopy vs. Single-Fluoroscopy in Balloon Kyphoplasty: A Study of Efficiency and Safety.

Background: Vertebral compression fractures (VCFs) are the most prevalent type of osteoporotic fractures, often causing significant pain, morbidity, and mortality. Vertebral augmentation procedures like balloon kyphoplasty (BK) are effective in treating VCFs. These procedures are typically performed using a single fluoroscopy machine (SF) for anteroposterior (AP) and lateral views. We have implemented a dual-fluoroscopy (DF) technique to reduce procedure time and radiation exposure. The goal of this study was to determine whether dual-fluoroscopy could optimize surgical efficiency without compromising safety, offering a more effective alternative to traditional single-fluoroscopy methods. Methods: This retrospective study included 126 patients who underwent BK with either SF (n = 74, 58.7%) or DF (n = 52, 41.3%) between 2020 and 2024. We collected data on procedure duration per pedicle (PDPP), radiation exposure (reference air kerma and dose-area product [DAP]), and radiation duration. A sub-analysis of post-learning phase cases was performed. Results: A learning curve was identified for the first 24 cases and 15 cases using the SF technique and DF technique, respectively, which was followed by a stabilization in procedure duration per pedicle (Levene's statistic = 10.623, p = 0.002 for SD difference, p < 0.001 for mean PDPP difference). After the completion of the learning phase for both techniques, the DF group demonstrated a significantly shorter PDPP (11.83 ± 4.3 vs. 14.03 ± 5.57 min, p = 0.049). No significant differences were found in radiation exposure, including radiation duration (p = 0.577), reference air kerma, or DAP. Conclusions: Dual-fluoroscopy significantly reduces procedure time after the learning curve is overcome, improving efficiency without increasing radiation exposure. This technique holds promise for optimizing kyphoplasty workflow and safety, supporting broader clinical adoption.

Analysis of Risk Factors on Patellofemoral Osteoarthritis: Distribution Characteristics and Radiographic Parameters of Patellofemoral Joint.

The risk factors for the degeneration of the patellofemoral joint (PFJ) have not been adequately and thoroughly studied. This study aimed to analyze the population distribution characteristics of patients with patellofemoral osteoarthritis (PFOA) and assess the correlation between PFOA and radiological parameters, including patella morphology, PFJ congruity, and patellar alignment. Moreover, the risk factors across various demographic groups were further analyzed. A retrospective analysis was conducted to examine the population distribution characteristics of PFOA patients from September 2020 to September 2023. Radiological parameters of the PFJ were measured from the anteroposterior and lateral views of knee joint as well as axial view of patella using X-ray imaging and the PACS imaging system at the First Affiliated Hospital of Kunming Medical University. These parameters included patella morphology (patella type, width, thickness, and Wiberg index), PFJ congruity (patella height, Wiberg angle, sulcus angle, and lateral patella angle), and patellofemoral alignment (patella tilt angle, displacement, and lateral patellofemoral angle). PFOA severity was classified according to the Iwano PFJ radiological classification, and its correlation with the aforementioned parameters was examined. Additionally, risk factors for PFOA across different populations were further evaluated. The study included 1080 patients according to the inclusion and exclusion criteria. Age, female gender, overweight or obesity, and manual workers were significantly associated with PFOA. Moreover, type III patella (OR = 3.03, p < 0.05), greater patella width (OR = 1.12, p = 0.01), sulcus angle (OR = 1.04, p < 0.01), patella tilt angle (OR = 1.13, p < 0.01), and patella displacement (OR = 1.22, p < 0.01) as well as smaller patella thickness (OR = 0.87, p < 0.01), Insall-Salvati index (OR = 0.24, p = 0.04), and lateral patellofemoral angle (OR = 0.93, p = 0.02) were identified as risk factors for PFOA. Furthermore, greater patella thickness (OR = 1.17, p < 0.05) and smaller patella displacement (OR = 0.79, p < 0.01) correlated with higher Kujala patellofemoral scores. Discrepancies in risk factors across different populations were also observed. Older age, female gender, obesity, manual workers, and specific aberrations in patellofemoral parameters are predictive factors for PFOA. Additionally, greater patella thickness and smaller patella displacement were associated with increased severity of clinical symptoms. Thus, more attention should be paid to the discrepancies that exist in different populations.

Effects of Parallax and Distortion in Total Ankle Arthroplasty.

Surgeons rely on intraoperative fluoroscopy to assist in placement of implant components during total ankle arthroplasty (TAA). Parallax alters the direction of an object when viewed from two different points, resulting in image distortion. The purpose of this study was to evaluate parallax/distortion in intraoperative fluoroscopic images during TAA. A retrospective review of all TAAs performed by two surgeons (R.W.M. and B.S.) from August 2019 to April 2023 were reviewed. Intraoperative fluoroscopic anteroposterior (AP) ankle views were evaluated for any obvious parallax image distortion. Cases with obvious parallax distortion were included for angular evaluation of AP intraoperative fluoroscopic and first postoperative plain films. The tibia was marked at 2-centimeter intervals to create zones from the proximal stem of the implant. The anatomical axis of the tibia (AAT) was drawn at the mid-diaphysis. The anatomic lateral distal tibial angle (aLDTA) and anatomic axis deviation (AAD) were measured for each zone. A total of 22 TAAs were performed during the study period. Four cases were excluded due to inadequate imaging, leaving a total of 18 TAAs for review. We found 6 of 18 (33.3%) cases had obvious parallax distortion. We found the average aLDTA was 90.9° (84°-101°). At the most proximal tibial zone, the average aLDTA was 94° (91°-101°). We found the average AAD was 4.7 (0.5-17.2) mm. The AAD ranged from 0.5 to 17.2 mm lateral to 0.8 to 8.2 mm medial. Postoperative plain film radiographs displayed a normal aLDTA and an AAT centered within the ankle joint. Parallax can distort the appearance of the tibia on fluoroscopic images. Deviation from the normal aLDTA and anatomical axis should be anticipated. Surgeons should be aware of the potential impact of parallax and ways to mitigate these effects.

Clinical outcomes of retrograde intramedullary multiple pinning for proximal humeral fractures using a modified palm tree technique

BackgroundRetrograde intramedullary multiple pinning using a modified palm tree technique for proximal humeral fractures has attracted interest from surgeons because of its minimal invasiveness into the soft tissue around the shoulder joints. We aimed to evaluate the clinical and radiological outcomes of this procedure. MethodsThis retrospective study included 21 patients who underwent surgery using a modified palm tree technique for proximal humeral fractures between March 2010 and March 2022. Patients with two- and three-part proximal humeral fractures that could be reduced by closed manipulation under general anesthesia were included in this study. All patients were clinically evaluated using the Japanese Orthopaedic Association (JOA) and University of California at Los Angeles (UCLA) shoulder scores. Postoperative radiographic findings, including fracture healing and signs of pinning-related complications, were evaluated. ResultsTwenty-one shoulders in 21 patients (9 men and 12 women) with mean age at surgery of 66.3 ± 19.3 years were evaluated. The mean period until bone union was 2.6 ± 0.7 months. The mean JOA and UCLA shoulder scores at the final follow-up were 84.8 ± 12.1 and 27.5 ± 5.4, respectively. Perforation of the humeral head by Kirschner (K) wires was observed in 9 of the 21 (42.9 %) shoulders. The JOA and UCLA shoulder scores at the final follow-up were not significantly different between the groups with and without perforations (p = 0.41 and 0.27, respectively). The oblique or Y-view detected significantly more wires with perforation of the humeral head than did the anteroposterior view (6 vs. 15 wires, p < 0.01). ConclusionsThe modified palm tree technique for proximal humeral fractures demonstrated good postoperative clinical outcomes and early fracture healing. However, modifications in postoperative management and surgical techniques should be considered to reduce the high rate of perforation of the humeral head by K-wires.

Anatomic physeal-sparing MPFL reconstruction in skeletally immature patients shows favourable outcomes at a minimum of 24-month follow-up.

Recurrent patellar dislocation is a prevalent orthopaedic issue among active paediatric and adolescent populations. Bony surgical procedures are not recommended in growing patients; therefore, the focus of surgery is on restoring the medial patellar ligaments, with different reconstructive techniques available. This retrospective case series focuses on the 2-year outcomes of medial patellofemoral ligament (MPFL) reconstruction in skeletally immature patients with open physis. Twenty-four consecutive patients with patellofemoral instability and open growth plates underwent anatomic MPFL reconstruction with a physeal-sparing technique. All subjects have had more than three episodes of true patellar dislocations. Preoperative radiographic examination included anteroposterior and lateral views to assess patella alta and limb alignment. Magnetic resonance imaging was performed to evaluate trochlear dysplasia and tibial tubercle-trochlear groove (TT-TG) distance. The patients were questioned regarding complications and clinical outcomes using the visual analogue scale (VAS), Kujala and Paediatric International Knee Documentation Committee (Pedi-IKDC) score. Variables were evaluated using paired t test with significance at p < 0.05. The mean age at the time of operation was 13.04 years (9-16 years). The cohort was followed for a mean duration of 38.66 months (24-86 months). The mean time from injury to surgery was 50.45 days (16-80 days). No growth arrest, limb-length discrepancies or angular deformities were observed post-operatively during the whole follow-up period. No patellar re-dislocations were recorded throughout the study period. The VAS score improved significantly from 5.67 (4-8) to 1.88 (0-4) (p < 0.01). The Kujala score improved significantly from 64.67 (44-81) preoperatively to 87.58 (77-100) post-operatively (p < 0.01). The Pedi-IKDC also increased significantly from 58.81 (34.80-77.70) preoperatively to 90.64 (70.70-100) post-operatively (p < 0.01). The vast majority of patients (87.5%) returned to their pre-injury activity level. Boys scored better than girls in VAS, Pedi-IKDC and Kujala score post-operatively, but these differences were not statistically significant. Physeal-sparing MPFL reconstruction in children and adolescents yields excellent midterm results and allows patients to return to sports without redislocation of the patella. Boys scored better than girls in VAS, Pedi-IKDC and Kujala score post-operatively, but these differences were not statistically significant. IV: case series with no comparative group.

Treatment outcomes of concomitant ipsilateral neck and trochanteric fractures using Gamma3 nails with U-blade lag screws.

This study aimed to investigate the outcomes of Gamma3 nails fitted with U-blade lag screws in the management of combined neck and trochanter fracture of the femur. Two hundred-fifty patients with fractures in the proximal femur underwent treatment using Gamma3 nails integrated with U-blade lag screws from 2015 to 2022. Among these cases, 33 had combined neck and trochanteric fractures; 8 patients were excluded because of follow-up for <1 year. The remaining data of 25 patients (7 males and 18 females) were reviewed. Bone mineral density (BMD), body mass index (BMI), tip-apex distance (TAD), extent of lag screw migration, femoral neck-shaft angle, callus formation, fracture type, and treatment failure were analyzed. The mean patient age was 76.3 (range, 61-91) years, and the mean follow-up duration was 17.3 (range, 12.5-57.3) months. The mean BMD T-scores for the spine and femoral neck were -2.3 ± 1.0 and -2.8 ± 0.7, respectively; 18 patients had T-scores ≤-2.5, indicating osteoporosis. The mean BMI was 23.2 ± 3.8 kg/m2 , and the mean operative time was 69.8 (range, 45-90) minutes. Twenty-one patients experienced injuries from slipping, 2 sustained injuries from falling, and 2 from car traffic accidents. The mean TAD was 21.6 ± 5.9 mm, with 16 patients showing <25 mm. The mean extent of lag screw migration was 5.7 ± 5.1 mm. The mean femoral neck-shaft angle on plain radiographs was 125.1 ± 8.6 degrees immediately postoperatively and 120.3 ± 9.5 degrees at the final follow-up. During the follow-up period, the first callus formation was observed at 3.8 months (range, 1.4-7.3) on plain radiographs in the anteroposterior and axial views. Based on our fracture criteria, 4 patients had a two-part fracture type, 12 patients had three-part, and 9 patients had four-part. Out of 25 patients, 3 exhibited treatment failure. No significant differences were observed between the groups with and without bone union regarding age, BMD, BMI, operative time, TAD of the lag screw, extent of lag screw migration, and femoral neck-shaft angle. The bone union was achieved in 88% of patients who underwent treatment utilizing the U-blade Gamma3 nail for concomitant ipsilateral neck and trochanteric fractures. Level IV, Therapeutic Study.

Standard radiographic images in cephalomedullary nailing fixation for intertrochanteric femoral fractures

To review and summarize the projections of radiographic images during cephalomedullary nailing fixation for intertrochanteric femoral fractures, and to propose a set of three projections as standard requirement in immediate postoperative fluoroscopy. Papers on intertrochanteric femoral fractures treated with cephalomedullary nailing fixation that published in a three-year period of 2021-2023 in four leading English orthopedic trauma journals were searched in PubMed. The presented radiographic pictures were identified and scrutinized as whether they were in standard anteroposterior and/or lateral projections of the implanted nails. The nonstandard presence percentage was calculated. Combined with clinical experience, the standard anteroposterior and lateral perspective images of femoral neck, the current situation of radiographic imaging in the operation of cephalomedullary nails, the literature analysis of nonstandard images, the impact of limb rotation on image interpretation, and the characteristics of anteromedial 30° oblique perspective were summarized and analyzed. The presence of nonstandard radiographic pictures is 32.1% in anteroposterior view and 69.2% in lateral view in leading orthopedic trauma journals. In cephalomedullary nailing fixation operation of intertrochanteric femoral fractures, it is reasonable to use the radiographic images of the implanted nails to represent the fractured head-neck, as the head-neck implant (lag screw or helical blade) is aimed to put into centrally in femoral head in lateral projection. Limb rotation or nonstandard projections produced distortion of images, which interfers the surgeons' judgement of fracture reduction quality and the measurement of implant position parameters in femoral head (such as neck-shaft angle and tip-apex distance), and finally lead to a meaningless comparison with the accurate normal value. The 30° anteromedial oblique view from the true lateral (set as 0°) is a tangential projection of the cortices at the anteromedial inferior corner, which gives a clear profile for the determination of cortical apposition status and mechanical support. It is essential to get firstly the true standard lateral fluoroscopy of the nail (shown as a line), then rotate the C-arm to 90° and 30° to get anteroposterior and anteromedial oblique views, and use these three immediate postoperative radiographies as the baseline for evaluation of operative quality and follow-up comparisons. As for real-time monitoring of surgical steps, intraoperative fluoroscopy follows the "Enough is Good" principle, but as for immediate postoperative data storage and basis for operative quality evaluation and baseline for follow-up comparison, it is recommended to obtain a set of three standard radiographic pictures in anteroposterior, true lateral, and 30° anteromedial oblique fluoroscopic projections.

Assessing the current role of AP and Bernageau view radiographs in measurement of glenoid bone loss in patients with recurrent shoulder dislocation: correlation with computed tomography, magnetic resonance imaging, and arthroscopy.

Evaluation of glenoid bone loss following recurrent anterior shoulder dislocations is normally performed using cross sectional imaging. To assess how anteroposterior (AP) and Bernageau view radiographs compare to computed tomography (CT), magnetic resonance imaging (MRI) and arthroscopy for evaluating glenoid bone loss in patients with recurrent anterior shoulder dislocation. A prospective observational study was performed on 32 patients over two years at a tertiary orthopedic center. The loss of sclerotic glenoid rim (LSGL) on AP radiograph and the percentage relative glenoid bone loss on the Bernageau radiograph were assessed. The percentage glenoid bone loss and anterior straight line (ASL) were calculated using a best fit en face circle method using CT and MRI. Percentage glenoid bone loss was also calculated during arthroscopy in multiples of 5%. In our study, 90.6% (29) patients were males, while only 9.4% (3) were females. This can be attributed to the involvement of the males in outdoor activities and sports. Also, the maximum number of patients were found to belong to 21-30years of age, with the mean age being 28.66years. Of the 32 patients, loss of sclerotic glenoid line (LSGL) on AP radiographs correlated with glenoid bone loss on cross-sectional imaging in 27 patients. Three patients had equivocal LSGL and 2 patients with glenoid bone loss on CT did not demonstrate LSGL. The difference between the two modalities was not statistically significant (p value = 0.002). The glenoid bone loss on Bernageau view correlated with glenoid bone loss on cross sectional imaging in all but one patient. The bone loss as evaluated by radiograph Bernageau view was found to have strong correlation (correlation coefficient r = 0.948, p value < 0.0001). AP and Bernageau radiographic views for anterior shoulder dislocations demonstrate good correlation with glenoid bone loss on cross-sectional imaging. They may also be used as an adjunct to predict overall bone loss on CT and at arthroscopy.

Assessing the Reliability of Postoperative Cross-Table Radiographs Compared to CT Scans for Measuring Acetabular Anteversion Angle Following Total Hip Arthroplasty.

This study aimed to evaluate acetabular anteversion following total hip arthroplasty (THA) using cross-table lateral radiographs and CT scans and to determine the reliability of cross-table lateral radiographs compared to computed tomography (CT) scans for measuring acetabular anteversion. We conducted a cross-sectional study of patients undergoing THA at Justice K.S. Hegde Charitable Hospital, Deralakatte, Mangalore, from January 2020 to June 2021. Radiographs are typically taken in both anteroposterior (AP) and lateral views after THA. However, for this study, a cross-table lateral view was used instead of the usual lateral radiograph to measure the angle of anteversion. The anteversion was calculated using the method described by Woo and Morrey. Additionally, CT scans were performed on all patients as part of the study protocol. The anteversion measured in these scans was compared to that in the cross-table radiographs to assess the latter's reliability for routine use. The risk of radiation exposure from CT scans was minimized by adhering to the ALARA (As Low as Reasonably Achievable) principle, with only axial sections of the acetabular cup being scanned. The results show that the radiographic acetabular anteversion and CT scan measurements have a mean difference of 0.3036. There is a positive correlation between these measurements. The p-value is not statistically significant (p=0.698). Therefore, the measurements are correlated with each other with a linear relationship (r=0.919). For anteversion measurements using the X-ray method, the mean was 27.16 degrees with a standard deviation of ±9.49. The median was 27.26 degrees, ranging from 10.27 to 42.58 degrees. In comparison, the CT method yielded a mean anteversion of 27.40 degrees with a standard deviation of ±8.50 degrees. The median was 27.64 degrees, ranging from 12.35 to 43.11 degrees. Cross-table lateral radiographs are a reliable and comparable method to CT scans for measuring acetabular anteversion following total hip arthroplasty.

A new method for evaluating radial neck fractures based on Judet classification.

To propose a new method for evaluating paediatric radial neck fractures and improve the accuracy of fracture angulation measurement, particularly in younger children, and thereby facilitate planning treatment in this population. Clinical data of 117 children with radial neck fractures in our hospital from August 2014 to March 2023 were collected. A total of 50 children (26 males, 24 females, mean age 7.6 years (2 to 13)) met the inclusion criteria and were analyzed. Cases were excluded for the following reasons: Judet grade I and Judet grade IVb (> 85° angulation) classification; poor radiograph image quality; incomplete clinical information; sagittal plane angulation; severe displacement of the ulna fracture; and Monteggia fractures. For each patient, standard elbow anteroposterior (AP) view radiographs and corresponding CT images were acquired. On radiographs, Angle P (complementary to the angle between the long axis of the radial head and the line perpendicular to the physis), Angle S (complementary to the angle between the long axis of the radial head and the midline through the proximal radial shaft), and Angle U (between the long axis of the radial head and the straight line from the distal tip of the capitellum to the coronoid process) were identified as candidates approximating the true coronal plane angulation of radial neck fractures. On the coronal plane of the CT scan, the angulation of radial neck fractures (CTa) was measured and served as the reference standard for measurement. Inter- and intraobserver reliabilities were assessed by Kappa statistics and intraclass correlation coefficient (ICC). Angle U showed the strongest correlation with CTa (p < 0.001). In the analysis of inter- and intraobserver reliability, Kappa values were significantly higher for Angles S and U compared with Angle P. ICC values were excellent among the three groups. Angle U on AP view was the best substitute for CTa when evaluating radial neck fractures in children. Further studies are required to validate this method.

Treatment options for unstable posterior pelvic ring lesions: A multicenter retrospective cohort study of the Italian Society for the Traumatology of the Pelvis.

Posterior pelvic ring lesions are a common finding in patients with pelvic trauma, representing a challenging condition for trauma surgeons. Surgical options are different and there is not yet evidence about the best option. Aim of the study are: (i) to compare Lumbopelvic fixation (LPF) and ilio-sacral screw fixation (ISS) regarding clinical and radiological outcome in unstable posterior pelvic ring injuries, both as whole population and single similar fracture types according to Tile classification (C1vsC1, C2vsC2, C3vsC3); (ii) to analyze clinical outcomes and complications in lumbopelvic fixation group, comparing open and closed reduction technique. A retrospective multicenter study was performed. Data of the patients were collected. Inclusion criteria were: (i) unstable posterior ring lesions Tile C type, (ii) surgically treated either through ISS (Group A) or LPF (Group B), (iii) minimum follow-up 12 months. Radiological evaluation was made through plain radiographs in Antero-posterior (AP), inlet and outlet views. Last clinical evaluation at 12 months was assessed through Majeed Score, and quality of life (QoL) through SF-12. Group A was represented by 76 patients, and Group B by 42. Group B had better result in Majeed score for non-workers (average 60.1 ± 21.6 vs 65.0 ± 15.6, p = 0.016*). Comparing only C3-type lesions, Group A showed a higher rate of implants breakage (p = 0.032*). Other differences had p > 0.05. Comparing patients underwent open (ORIF) or closed (CRIF) reduction in Group B, CRIF group had shorter hospitalization (47.2 vs 23.4 days, p = 0.020*), an earlier full weight-bearing recovery (4.1 vs 2.6 months, p = 0.035*) and a better Majeed score in workers patients (70.3 vs 82.8, p = 0.019*). Better results for CRIF group were also recorded in quality of life (QoL), both in mental (45.1 vs 55.2, p = 0.040*) and physical outcome (31.9 vs 50.7, p < 0.001*). ISS and LPF represent both good choices in posterior pelvic ring lesions, however some significant differences were noted. LPF seems to be preferable if the patient did not work before the trauma, due to better clinical outcome. In Tile C3 lesions, LPF have lower breakage rates. If LPF is chosen, CRIF provides better clinical outcomes, QoL and lower hospitalization.

Radiologic evaluation of the healing of the greater tubercle after humeral hemiarthroplasty with Aequalis-fracture-implants for proximal humeral fracture: a retrospective cohort study in 45 shoulders

IntroductionDevelopment and use of specific anatomic prosthesis for shoulder’s fracture aimed to reach the best rate of consolidation of the greater tubercle, which means a cuff restitution to improve functional results. The lack of bone healing of the tubercles suggested the use of a fenestrated humeral implant with interposition of a bone graft in the metaphyseal part of the prosthesis. This characteristic of specific implant, have few reports in the literature, leading us to the current retrospective study aiming: 1) to evaluate the healing rate of the greater tubercle after implantation of fracture dedicated anatomic implant, which includes a fenestration in the prosthetic metaphysis for the addition of a cortico cancellous graft, 2) to asses on patients with proximal humerus fractures, the bone healing of the greater tubercle close to the intraprosthetic bone graft. HypothesisThe specific “implant-fracture” can achieve a high rate of bone healing of the humeral greater tubercle Patients and methodsBetween January 2001 and December 2020, fifty-one patients were operated on by implantation of fracture dedicated implant for proximal humerus fracture. Six were excluded (2 operated for revision, 2 operated after 3 weeks, 1 died, 1 without follow-up). In total 45 patients were included in radiological analysis, clinical analysis had been performed on 23/45 patients at the longest follow up, the other 22/45 were only analyzed on radiographies. Mean-aged 66 years (range, 47 years -88 years), 25/45 (56%) of women, with 3-4-parts fractures according to Neer’s classification. The techniques of tubercle fixation were isolated cerclages of combined horizontal cerclages and vertical sutures. Position and healing of the greater tubercle was controlled through antero-posterior and lateral X-Rays views at the longest follow-up (mean 50 months, range 3 to 193 months). Peroperative techniques of fixation, clinical and functional outcomes were noted and correlated to the radiologic position of the greater tubercle and the graft evolution. Factors associated with healing and anatomic position had been investigated. ResultsThe rate of greater tubercle healing was 32/45 (73%). Factors significantly associated with greater tuberosity consolidation were higher age (p = 0.04) and the addition of a vertical osteosuture to the horizontal suture of the greater tubercle (p = 0.01). The rate of anatomic position of the greater tubercle was 15/45 (33%) of cases. When the fixation of the tuberosity was made with vertical suture, good position of the tuberosity was observed in 68% (17/24) at the longest follow-up. DiscussionOur results were in accordance with the literature, but the current study underlined there were two types of factors influencing tubercle healing in the literature: the technique of fixation of the tubercle and the patient’s age. Level of evidencelevel IV cohort study without control group.

Development of an artificial intelligence model for predicting implant size in total knee arthroplasty using simple X-ray images

BackgroundAccurate estimation of implant size before surgery is crucial in preparing for total knee arthroplasty. However, this task is time-consuming and labor-intensive. To alleviate this burden on surgeons, we developed a reliable artificial intelligence (AI) model to predict implant size.MethodsWe enrolled 714 patients with knee osteoarthritis who underwent total knee arthroplasty from March 2010 to February 2014. All surgeries were performed by the same surgeon using implants from the same manufacturer. We collected 1412 knee anteroposterior (AP) and lateral view x-ray images and retrospectively investigated the implant size. We trained the AI model using both AP and lateral images without any clinical or demographic information and performed data augmentation to resolve issues of uneven distribution and insufficient data. Using data augmentation techniques, we generated 500 images for each size of the femur and tibia, which were then used to train the model. Using data augmentation techniques, we generated 500 images for each size of the femur and tibia, which were then used to train the model. We used ResNet-101 and optimized the model with the aim of minimizing the cross-entropy loss function using both the Stochastic Gradient Descent (SGD) and Adam optimizer.ResultsThe SGD optimizer achieved the best performance in internal validation. The model showed micro F1-score 0.91 for femur and 0.87 for tibia. For predicting within ± one size, micro F1-score was 0.99 for femur and 0.98 for tibia.ConclusionWe developed a deep learning model with high predictive power for implant size using only simple x-ray images. This could help surgeons reduce the time and labor required for preoperative preparation in total knee arthroplasty. While similar studies have been conducted, our work is unique in its use of simple x-ray images without any other data, like demographic features, to achieve a model with strong predictive power.

Finite element analysis of fixation stability according to reduction position for internal fixation of intertrochanteric fractures

In recent years, finite element analysis (FEA) has been instrumental in comparing the biomechanical stability of various implants for femur fracture treatment and in studying the advantages and disadvantages of different surgical techniques. This analysis has proven helpful for enhancing clinical treatment outcomes. Therefore, this study aimed to numerically analyze fixed stability according to location using FEA. In this study, a virtual finite element model was created based on a clinically anatomically reduced patient. It incorporated positive and negative support derived from intramedullary and extramedullary reduction from the anteroposterior (AP) view and neutral support from the lateral view. The generated model was analyzed to understand the biomechanical behavior occurring in each region under applied physiological loads. The simulation results of this study showed that the average von Mises stress (AVMS) of the nail when performing intramedullary reduction for femoral fixation was 187% of the anatomical reduction and 171% of the extramedullary reduction, and individually up to 2.5 times higher. In other words, intramedullary reduction had a very high possibility of fixation failure compared to other reduction methods. This risk is amplified significantly, especially in situations where bone strength is compromised due to factors such as old age or osteoporosis, which substantially affects the stability of fixation. Extramedullary reduction, when appropriately positioned, demonstrates greater stability than anatomical reduction. It exhibits stable fixation even in scenarios with diminished bone strength. In instances in which the bone density was low in the support position, as observed in the lateral view, the AVMS on the nail appeared to be relatively low, particularly in cases of positive support. Additionally, the femur experienced lower equivalent stress only in the extramedullary reduction-negative position. Moreover, by comparing different reduction methods and bone stiffness values using the same femoral shape, this study offers insights into the selection of appropriate reduction methods. These insights could significantly inform decision making regarding surgical strategies for intertrochanteric fractures.

Minimally Invasive Quadricepsplasty Using the Adolphson-Cerqueira Technique: A Retrospective Study after 1-Year of Follow-up.

Knee stiffness limits activities of daily living with treatment having no gold standard technique currently. We present follow-up data 1-year after quadricepsplasty using the Adolphson-Cerqueira technique for the treatment of knee stiffness in a Brazilian population sample. This retrospective study included patients who underwent a quadricepsplasty using the Adolphson-Cerqueira technique between January 2006 and March 2023 at our institution. The inclusion criteria were: (1) Knee stiffness with a range of motion <70°; (2) Patellar excursion ≥2 mm on physical examination; (3) Available knee radiography in the anteroposterior and lateral views; and (4) A follow-up at 1 year postoperatively. The Judet Classification was used to assess the outcome of the quadricepsplasty. Sixty-seven patients were included. The results were 6% poor, 31.3% fair, 44.8% good, and 17.9% excellent according to the Judet Classification. A correlation was observed between age and the gain in range of motion at the 1-year postoperative follow-up, and between the gain in range of motion intraoperatively and that at the 1-year follow-up. There were five cases of complications (7.46%): one of patellar fracture, three of quadriceps tendon rupture, and one of avulsion fracture in the superior pole of the patella. Quadricepsplasty using the Adolphson-Cerqueira technique produced satisfactory results overall for improving knee joint stiffness and had a complication rate comparable with other currently used techniques. Loss of knee range of motion remains a difficult problem without there being a clear gold standard in treatment. Many different options are described in the literature. We provide a further option with follow-up results. Cerqueira FS, Silva L, Kropf LL, et al. Minimally Invasive Quadricepsplasty Using the Adolphson-Cerqueira Technique: A Retrospective Study after 1-Year of Follow-up. Strategies Trauma Limb Reconstr 2024;19(2):87-93.

Early monitoring of inlay wear after total knee arthroplasty on plain radiographs using model-based wear measurement

Wear of the ultra-high molecular-weight polyethylene (UHMWPE) component in total knee arthroplasty contributes to implant failure. It is often detected late, when patients experience pain or instability. Early monitoring could enable timely intervention, preventing implant failure and joint degeneration. This study investigates the accuracy and precision (repeatability) of model-based wear measurement (MBWM), a novel technique that can estimate inlay thickness and wear radiographically. Six inlays were milled from non-crosslinked UHMWPE and imaged via X-ray in anteroposterior view at flexion angles 0°, 30°, and 60° on a phantom knee model. MBWM measurements were compared with reference values from a coordinate measurement machine. Three inlays were subjected to accelerated wear generation and similarly evaluated. MBWM estimated inlay thickness with medial and lateral accuracies of 0.13 ± 0.09 and 0.14 ± 0.09 mm, respectively, and linear wear with an accuracy of 0.07 ± 0.06 mm. Thickness measurements revealed significant lateral differences at 0° and 30° (0.22 ± 0.08 mm vs. 0.06 ± 0.06 mm, respectively; t-test, p = 0.0002). Precision was high, with average medial and lateral differences of − 0.01 ± 0.04 mm between double experiments. MBWM using plain radiographs presents a practical and promising approach for the clinical detection of implant wear.

Interobserver reliability of shoulder radiographic findings and correlation to MRI: a preliminary case series.

The aim of this study was to evaluate the interobserver reliability of measurements of the Acromiohumeral Distance (AHD) first described by Golding et al., the Critical Shoulder Angle (CSA), the Acromion Index with Glenoid Humeral (GH) and Glenoid Acromial (GA) distances, following the measuring method by Nyffeler et al., the Lateral Acromion Angle (LAA), as well as the morphology of the acromion according to Bigliani and the humeral head position according to Maloney in X-rays and MRI. Furthermore, the study assessed the correlation of measurement results in X-ray with those in MRI for AHD, CSA, GA, GH, AI, and LAA. A total of 187 patients who underwent shoulder joint X-ray and MRI examinations from 09/2016 to 05/2023 were included in the study. Patients with poor imaging quality, arthrosis or radical prior surgeries, like shoulder prosthetic surgery, status post humerus fractures, that have undergone surgery and therefore changed the anatomical features were excluded, what lead to a total study population of 78. X-ray measurements were performed by two observers in the true anteroposterior view, so that the humeral head and the glenoid are shown without overlap, providing a clear view into the joint space. MRI measurements were performed in oblique coronal MRI slices, using the most accurately depicted glenoid surface as a landmark. Interobserver measurement results showed a significance with p < 0.001 for the assessment of acromion type according to Bigliani, humeral head offset assessment according to Maloney, and AHD. No significance was found for interobserver reliability in measuring LAA. Additionally, there was a high correlation of measurement results in X-ray with measurements in MRI for, CSA, GH/GA, and consequently AI, a good correlation for AHD but no correlation could be shown for LAA. These findings provide valuable insights into the robustness of radiological parameters for evaluating shoulder pathology, offering promising prospects for clinical applications and further research. Nevertheless, the specific methodological considerations and patient characteristics should be taken into account when interpreting the results to ensure their accurate application in clinical practice.

Evaluation of Normal Ranges of Wrist Radiologic Indexes in Jordanian Population.

The wrist is a complex joint that plays a role in several everyday tasks. Various radiological indices have been created to assess the alignment and structure of the wrist using standard X-ray images. Nevertheless, these indicators may differ based on variables such as age, gender, ethnicity, handedness, and wrist position. This research aimed to assess the radiological indices of the wrist in a group of healthy people from Jordan and investigate the impact of age and gender on these indices. We obtained data from a sample of 385 patients who presented at our hospital with minor non-specific wrist pain and satisfied the specified criteria for inclusion. We conducted measurements of radial inclination, radial height, volar tilt, ulnar variance, and carpal height ratio using both anteroposterior and lateral views of the wrist. We used linear regression and independent sample t-test to examine the correlation between age, gender, and radiological indicators. The reliability of the measurements was assessed using the intraclass correlation coefficient (ICC). Our study revealed a negative correlation between age and carpal height ratio (r = -0.13, p = 0.03). However, no significant gender differences were seen in any of the radiological indices (p > 0.05). Our findings indicate that ulnar variance had the greatest level of reliability across observers, with an intra-observer intraclass correlation coefficient (ICC) of 0.95 and an inter-observer ICC of 0.8. Conversely, volar tilt exhibited the lowest inter-observer reliability, with an ICC of 0.1.Our results provide a valuable point of reference for the wrist morphology and alignment in the Jordanian population. Our suggestion is that the carpal height ratio might indicate alterations in the wrist joint due to aging, whereas ulnar variation may serve as a dependable indicator of wrist alignment. We suggest doing more research to investigate the biological and anatomical factors behind these results and to compare them with other demographic groups.

Evaluation of anatomo-radiological outcomes of volar plating for volar displaced distal radius fractures

Background: The purpose of this study was to evaluate the anatomo-radiological outcomes of volar displaced distal radial fractures managed by volar plating. Methods: It was a retrospective analytical and monocentric study performed within 8 years from 01 January 2014 to 31 December 2022; at the orthopedic and traumatological department of the university hospital Idrissa Pouye in Dakar (Republic of Senegal). All the patients managed by volar plating for volar displaced distal radial fractures during the period of the study were included; those managed through another treatment option, lost and whose folders could not be explored were excluded. Clinically, the patients were evaluated at the last follow up thanks to the Green and O’Brien scale; radiologically, the comparison was done among the preoperative, postoperative and the last follow up standard lateral view and antero-posterior view of the wrist. Results: There were 37 patients (31 males and 6 females), the average age was 40 years old with a range from 18 to 66 years old. The minimum follow-up was 10 months. The clinical results showed at the last follow up an average functional Green and O’Brien scale of 80.2 with a range from 15 to 95. The postoperative radiological results showed the average radial frontal tilt of 21.3° with a range from 11° to 25°; the average radial sagittal tilt of 12.6° with a range from 10° to 15° and the average ulnar-radial index of 0mm with a range from -2 to +2. Three cases of radiocarpal arthrosis were found. Conclusions: The volar plating of volar displaced distal radial fractures constitutes the indication of choice in order to restore the normal anatomy of the wrist and its function.