Anterior Spinal Reconstruction Research Articles

Surgical Treatment Outcomes of Anterior-Only Correction and Reconstruction for Severe Cervical Kyphotic Deformity with Neurofibromatosis-1: A Retrospective Study with a 5-Year Follow-Up.

Currently, anterior-only (AO), posterior-only, and combined anterior-posterior spinal fusions are common strategies for treating cervical kyphosis in patients with neurofibromatosis-1 NF-1. Nevertheless, the choice of surgical strategy remains a topic of controversy. The aim of our study is to evaluate the safety and effectiveness of anterior decompression and spinal reconstruction for the treatment of cervical kyphosis in patients with NF-1. Twelve patients with NF-1-associated cervical kyphotic deformity were reviewed retrospectively between January 2010 and April 2020. All patients underwent AO correction and reconstruction. The X-ray was followed up in all these patients to assess the preoperative and postoperative local kyphosis angle (LKA), the global kyphosis angle (GKA), the sagittal vertical axis, and the T1 slope. The visual analog scale score, Japanese Orthopedic Association (JOA) score, and neck disability index (NDI) score were used to evaluate the improvement inclinical symptoms. The results of the difference in improvement from preoperatively to the final follow-up assessment were assessed using a paired t-test or Mann-Whitney U-test. The LKA and GKA decreased from the preoperative average of 64.42 (range, 38-86) and 35.50 (range, 10-81) to an average of 16.83 (range, -2 to 46) and 4.25 (range, -22 to 39) postoperatively, respectively. The average correction rates of the LKA and GKA were 76.11% and 111.97%, respectively. All patients had achieved satisfactory relief of neurological symptoms (p < 0.01). JOA scores were improved from 10.42 (range, 8-16) preoperatively to 15.25 (range, 11-18) at final follow-up (p < 0.01). NDI scores were decreased from an average of 23.25 (range, 16-34) preoperatively to an average of 7.08 (range, 3-15) at the final follow-up (p < 0.01). Anterior-only correction and reconstruction is a safe and effective method for correcting cervical kyphosis in NF-1 patients. In fixed cervical kyphosis cases, preoperative skull traction should also be considered.

Spinal aspergillosis: a rare clinical case and review of the literature

Objective. To analyze long-term results of treatment of a patient with recurrent lumbar aspergillosis and to systematize the literature data.Material and Methods. Long-term follow-up results of treatment of recurrent Aspergillus spondylitis in a 48-year-old patient who underwent primary surgery for reconstruction of the anterior spinal column through the anterior approach were studied. Literature data on the treatment of spinal aspergillosis from 2000 to 2022 were systematized.Results. The key method for the etiological verification of spinal aspergillosis is percutaneous bone biopsy from the lesion, followed by histological and bacteriological examination of the material. Isolated anterior spinal column reconstruction through the anterior approach ensures the achievement of local control of the infection process, but a short course of antimycotic chemotherapy after surgery is a factor of disease recurrence. The optimal duration of antimycotic chemotherapy in the postoperative period is at least 3 months, with voriconazole being the drug of choice.Conclusion. Spondylitis caused by Aspergillus spp. is a special form of inflammatory spine disease requiring obligatory percutaneous bone biopsy for etiological verification. A multidisciplinary therapeutic approach including a course of conservative antimycotic therapy for at least 3 months, surgical debridement and reconstruction of the affected spinal motion segments provide the best clinical results.

Is 3D-printed prosthesis stable and economic enough for anterior spinal column reconstruction after spinal tumor resection? A retrospective comparative study between 3D-printed off-the-shelf prosthesis and titanium mesh cage.

To investigate the stability and cost-effectiveness of the three-dimensional-printed (3DP) off-the-shelf (OTS) prosthesis in the reconstruction of the anterior column of the thoracic/lumbar spine after tumor resection. Thirty-five patients (26 with primary malignant tumors and nine with metastatic malignant tumors) who underwent tumor resection and anterior column reconstruction between January 2014 and January 2019 were included in a single institute. Patients were divided into the 3DP OTS prosthesis (3DP) group (n = 14) and the titanium mesh cage (TMC) group (n = 21) by the type of implant. The operation time, intraoperative blood loss, hospital stay, history of radiotherapy, surgical level and total cost were collected and compared between the two groups. Mechanical complications and radiological parameters including mean vertebral height, subsidence, fixation failure(nonunion, migration, screw loosening, rod breakage) rate were recorded at preoperation, 1week, 3months, 6months, 12months after surgery then at 1year interval or stop until the end of survival. The follow-up patients were also sent with short form-36 to assess their health-related quality of life (HRQoL) and questions about the current condition of their disease. The mean overall follow-up was 24.6months. Of the 35 patients involved, six patients died and six were lost to follow-up. The differences between the two groups in operative time, intraoperative blood loss, and hospital stay were not statistically significant (p > 0.05). The differences in fixation failure and the subsidence rate between the two groups were not statistical significant (p > 0.05). The difference of subsidence rate between the cases with and without osteoporosis, cases with and without radiotherapy was statistically significant within each group (p < 0.05). However, the difference of subsidence rate between the surgical level above or below T10 was not statistically significant (p > 0.05). The response rate of the questionnaire among the survived patients was 100% (23/23 patients). The results of the Short Form- (SF-)36 between the two groups were similar (p > 0.05). The total cost was higher in the 3DP group (p < 0.05) with its higher graft cost (p < 0.05), but the differences in internal fixation cost and other cost were not statistically significant between groups (p > 0.05). Compared to TMC, the 3DP OTS prosthesis achieved similar clinical and radiological results in spinal anterior spinal column reconstruction of thoracic/lumbar spinal tumor resection. However, the 3DP OTS prosthesis was more expansive than TMC.

Combined anteroposterior approaches in lateral position treatment of lumbosacral tuberculous in single-stage

BackgroundThe local anatomy of the lumbosacral region of spine is complicated, with special biomechanical characteristics. For surgical management of tuberculous spondylitis reported in the literature, the methods would be two-stage anterior and posterior approaches or one-stage anterior and posterior approach with patient’s intraoperative position being changed. These types of surgery approaches would result in long operative duration and more intraoperative blood loss, and most important there is no coordination between anterior and posterior procedures.MethodsThe purpose of this study was to introduce a new procedure called in the lateral position single -stage combined anteriorposterior approaches for treatment of lumbosacral tuberculous spondylitis and to evaluate its preliminary surgical outcomes. Fifteen patients with lumbosacral tuberculous spondylitis who underwent single-stage anterior and posterior radical focal debridement and reconstruction in lateral position in our hospital from April 2005 to June 2012 were included in the study. There were 6 males and 9 females with the average age of 46.8 years. The tuberculous lesions involved the following regions: L3-4 in 5cases, L4-5 in 5 cases, L5-S1 in 2 cases, L4 in one case, and L5 in 2 cases. The assessment of surgical outcomes was conducted with clinical symptoms and radiological findings,including operative time, blood loss. deformity angle, Frankel grade and Kirkaldy-Willis evaluation.ResultsOperation posture: The right lateral position was used for 11 patients and the left lateral position was used for the remaining 4 patients. The average duration of operation for the 15 patients was 270 min. The average intraoperative blood loss was 1720 ml. The mean follow-up period was 4.2 years. There was no recurrence. The postoperative radiological findings showed that the interbody bone grafts were fixed without any dislodgment. There was significant difference between preoperative and postoperative lumbosacral lordotic angles. Kirkaldy-Willis classification rating for the 13 cases with satisfactory results.ConclusionSingle-stage combined anterior and posterior surgical management of lumbosacral tuberculous spondylitis with patient in lateral position can achieve radical focal debridement, anterior and posterior procedure coordination and spinal reconstruction.

Usefulness of the Round Endcap Expandable Cage Placed on the Vertebral Ring Apophysis in Anterior Spinal Reconstruction

Rectangular endcap expandable cages are common in anterior thoracolumbar spine restoration. However, the cage is often too large to place in small, elderly women. In this study, we evaluated a method to place a round endcap expandable cage on the vertebral ring apophysis in elderly women. From April 2017 to August 2020, five women (mean age 75.8 years) underwent anterior-posterior spinal fusion with a round endcap expandable cage on the vertebral ring apophysis at the thoracolumbar junction. The local kyphotic angle, coronal Cobb angle, and intervertebral height were evaluated pre-and postoperatively. Cage subsidence and bone union were evaluated. The mean local kyphotic angle, coronal Cobb angle, and intervertebral height before surgery were 35.2°, 10.0°, and 65.3 mm, respectively. Immediately postoperatively, 1 week and 3 weeks after surgery, the kyphotic angle was 13.4°, 16.6°, and 18.5°; coronal Cobb angle was 2.8°, 2.2°, and 4.3°; and intervertebral height was 76.2 mm, 71.8 mm, and 70.6 mm. Cage subsidence was not observed and the bone union was achieved in all cases. An expandable cage with a round endcap was placed in small, elderly women by inserting the cage over the strong apophysis of the vertebral body. This technique may be useful to reduce the risk of postoperative subsidence and correction loss.

One-stage oblique lateral corridor antibiotic-cement reconstruction for Candida spondylodiscitis in patients with major comorbidities: Preliminary experience

Fungal spondylodiscitis is rare (0.5%–1.6% of spondylodiscitis) and mainly caused by Candida albicans. Surgical intervention in spondylodiscitis patients is indicated for compression of neural elements, spinal instability, severe kyphosis, failure of conservative management and intractable pain. However, there is no evidence-based optimal surgical approach for spondylodiscitis. There have been only case reports of surgical treatment for Candida spondylodiscitis. We evaluated the preliminary results of the efficacy and safety of one-stage debridement via oblique lateral corridor with interbody fusion (OLIF) using stand-alone cement reconstruction after debridement for the treatment of Candida spondylodiscitis in patients with major co-morbidities. Five patients (4 males, 1 female, mean age: 64.2 years) suffering from Candida albicans lumbar spondylodiscitis who underwent this procedure were studied. Their predominant symptoms were unremitting back and leg pain and all had pre and postoperative anti-fungal therapy under microbiologist supervision. The operative time ranged from 137minutes to 260minutes (mean: 213.4minutes). The mean blood loss was 160mL (range: 100–200mL). There were no perioperative complications. At follow-up all showed major improvement in pain and ambulatory status. CT scan showed radiological stability for all patients at 6–12 months. Our preliminary results showed stand-alone anterior debridement and spinal re-construction with cement through mini-open OLIF approach might be a safe and effective option for patients with spinal fungal infection and major comorbidities.

A histological examination of spinal reconstruction using a frozen bone autograft.

Our aim was to compare the process of bone formation after reconstruction of the vertebral body using a titanium cage with either a liquid nitrogen-treated (frozen) bone autograft or non-treated fresh bone autograft. Twelve canine beagles underwent anterior reconstruction of the 5th lumbar vertebrae using a titanium cage and bone autograft. Bone formation was compared across four experimental groups: fresh bone autograft groups, with animals sacrificed at either 8 or 16 weeks post-reconstruction, and liquid nitrogen-treated (frozen) bone autograft groups, with animals again sacrificed at either 8 or 16 weeks post-reconstruction. Bone formation was evaluated histologically by calculating the proportion of ‘reaction’ and ‘mature bone’ regions at the ends of the cage, its center, and ventral/dorsal sides. The reaction region contained osteocytes with a nucleus and osteoblasts accumulated on the surface of an osteoid, while a laminar structure was visible for mature bone regions. For fresh bone autografts, the reaction and mature bone regions significantly increased from 8 to 16 weeks post-reconstruction. By comparison, for frozen autografts, the reaction bone region did not significantly increase from 8 to 16 weeks post-reconstruction, while the mature bone region did increase over this time period. The proportion of reaction bone was higher at the ends and dorsal side of the cage at 8 weeks, for both graft types, with greater bone formation at the center of the cage at 16 weeks only for the fresh bone autograft. Therefore, bone formation in the anterior spinal reconstruction site tended to be delayed when using a frozen bone autograft compared to a fresh bone autograft. The bone formation process, however, was similar for both groups, beginning at the ends and dorsal side of the cage adjacent to the surrounding vertebral bone.

Kinematics and load-sharing of an anterior thoracolumbar spinal reconstruction construct with PEEK rods: An in vitro biomechanical study

BackgroundPolyetheretherketone rod constructs provide adequate spinal stability. Kinematics and load sharing of anterior thoracolumbar reconstruction with polyetheretherketone rods under preload remains unknown. MethodsEight human cadaveric specimens (T11-L3) were subjected to a pure moment of 5.0Nm in flexion-extension, lateral bending and axial rotation, and flexion-extension with a compressive preload of 300N. An anterior reconstruction of L1 corpectomy was conducted with a surrogate bone graft and anterior rod constructs (polyetheretherketone or titanium rods). An axial load-cell was built in the surrogate bone graft to measure the compressive force in the graft. Range of motion, neutral zone and compressive force in the graft were compared between constructs. FindingsThe polyetheretherketone rod construct resulted in more motion than the titanium rod construct, particularly in extension (P=0.011) and axial rotation (P=0.001), but less motion than the intact in all directions except in axial rotation. There was no difference in range of motion or neutral zone between constructs in flexion-extension under preload. The polyetheretherketone rod construct kept the graft compressed 52N which was similar to the titanium rod construct (63N), but allowed the graft compressed more under the preload (203N vs. 123N, P=0.003). The compressive forces fluctuated in flexion-extension without preload, but increased in flexion and decreased in extension under preload. InterpretationThe polyetheretherketone rod construct allowed more motion compared to the titanium rod construct, but provided stability in flexion and lateral bending without preload, and flexion and extension under preload. The anterior graft shared higher load under preload, particularly for the polyetheretherketone rod construct. The results of this study suggest that rigidity of rods in the anterior reconstruction affects kinematic behavior and load sharing.

Anterior Column Reconstruction with Bundled Autologous Rib Graft after Thoracic Spinal Tuberculosis Debridement

Introduction Vertebral defects are created after radical debridement for spinal tuberculosis, which often require anterior spinal column reconstruction with a strut graft. Autologous rib can be harvested through the same skin incision and can be exploited to reconstruct anterior column defect for thoracic spinal tuberculosis. The purpose of this study was to assess the clinical efficacy of bundled autogenous rib graft for anterior column reconstruction after thoracic spinal tuberculosis debridement. Material and Methods Fifty-eight patients with a confirmed diagnosis of thoracic vertebral tuberculosis (T4-T11) between January 2008 and December 2013 were analyzed retrospectively. All patients underwent anterior radical debridement and immediate reconstruction using bundled autologous rib with anterior instrumentation. We retrospectively analyze the clinical and radiographic data. Results All patients were followed 24–42 months and achieved solid bony fusions. There was no slide, subsidence, migration and breakage of bundled autogenous rib and screw-rod system. No significant loss of deformity correction was noted. Spinal cord function was effectively improved in all patients who had incomplete paralysis before surgery. There was no recurrence of tuberculosis. Pleural damage occurred in 10 ases while the rib was harvested. They were treated successfully with repair and closed drainage after operation. Two patients suffered from intercostal neuralgia postoperative and were relieved using non-steroidal anti-inflammatory (NSAID). The length of the rib harvested intraoperative was 15–22 cm with an average of 17.1 cm. Length of bundled autologous rib was 1.5–4.6 cm with an average of 3.7 cm. Cross-sectional area of bundled autologous rib accounted for an average of 35% of the endplate area adjacently. Conclusions This case series demonstrates anterior radical debridement, graft and instrumentation are safe and effective methods for thoracic tuberculosis. The bundled autogenous rib graft and anterior instrumentation could work effectively to provide immediate stabilization for reconstruction of anterior column defect created by radical debridement for thoracic spine.

Structural Femoral Shaft Allografts for Anterior Spinal Column Reconstruction in Osteoporotic Spines.

This study was to investigate the clinical and radiographical outcomes of anterior spinal column reconstruction using structural femoral shaft allografts in osteoporotic patients. Retrospective analyses of medical records, radiographic parameters, and postoperative complications were performed in twenty-one patients who underwent anterior spinal column reconstruction surgery for osteoporotic vertebral collapse or nonunion. Surgical invasiveness, clinical outcomes, postoperative complications, and radiographic outcomes were evaluated. Ambulatory status and back pain significantly improved. The Cobb's angle of segmental kyphosis significantly improved immediately after surgery with slight progression at the final follow-up. There were two cases of failed reconstruction with marked progression of kyphosis; both were related to loosening of screws rather than subsidence of the graft. Anterior spinal column reconstruction using femoral shaft allografts improved kyphosis and resulted in minimal subsidence and therefore is recommended as an effective treatment option for dealing with osteoporotic vertebral collapse and kyphotic deformity.

Posterolateral Debridement and Anterior Reconstruction by Limited Spinal Shortening in Thoracic and Lumbosacral Spinal Infections

Introduction Anterior debridement and fusion using bone graft or cage is an accepted way of treatment of spinal infections. This can be achieved either through anterior or posterior or two-stage (anterior then posterior) surgery. In last few years, several research works reported good results with use of single posterior surgical approach for treatment of spinal infections. Spinal column shortening may be used in spinal fractures, deformities, and tumors. Since 2004, posterolateral exposure for debridement of thoracic and lumbosacral spinal infections and limited spinal shortening for anterior spinal reconstruction have been used. Patients and Methods A total of 32 patients with spinal infections (10 patients with infection of the thoracic spine and 22 patients with infections of the lumbar spine) were treated by this technique. Patients included 20 males and 12 females with a mean age of 56.3 (range, 20–72) years. Overall, 10 patients had neurological compromise (two Frankel grade A, three Frankel grade B, three Frankel grade C, and two Frankel grade D). Patients are operated under general anesthesia in the prone position through a single posterior exposure. Posterior stabilization by transpedicular screw fixation is performed. A rod is inserted in one side (usually the right side) while the rod in the other side is not inserted to give space sufficient for laminectomy and debridement. For full exposure of the anterior aspect of the vertebral bodies in the thoracic spine, excision of the medial 5 cm of one or two ribs may be performed. In the lumbar spine, dissection around the vertebral body is not needed as retraction of the cauda equine usually gives good space sufficient for curettage of the disc and debridement of the infected tissues and the technique is posterior lumbar interbody fusion (PLIF). Infected material is curetted and the second rod is inserted. Reconstruction of the anterior column is achieved by limited spinal shortening while carefully observing the dura for kinking. Then, posterior fusion is performed using local bone graft obtained from the laminae and ribs. Results Patients were followed up for a mean of 33 (range, 6–80) months. Causative organisms were TB in 20 patients, Staph aureus in 4 patients, salmonella typhi, 1 patient, brucella in 1 patient, and bacteriologic testing of intraoperative samples did not find germs in 6 patients. Operative time ranged between 100 and 190 (mean 135) minutes. Successful fusion was achieved in all patients 3 to 6 months postoperatively. Neurological recovery to Frankel grade E was obtained in all but four patients (three Frankel grade D and one Frankel grade B). Five complications were encountered; malpositioned pedicle screw, deep venous thrombosis (DVT), delayed wound healing, kyphosis progression, and temporary neurological deterioration. No active infection occurred till the end of follow-up. Conclusion Posterolateral debridement and anterior reconstruction by limited spinal shortening is an alternative method for surgical treatment of spinal infections. Advantages of this technique include a wide cancellous surface for bone healing, good stability, avoid the morbidity of bone graft harvesting, short operative time, and less morbidity.

Effectiveness of nano-hydroxyapatite/polyamide 66 cage in anterior spinal reconstruction: a mid-term study

To evaluate the mid-term effectiveness of nano-hydroxyapatite/polyamide66 (n-HA/PA66) cage in the anterior spinal reconstruction. There were 177 patients who undergone the anterior decompression and fusion with n-HA/PA66 cage and internal fixation between January 2008 and January 2010 included in this study. There were 117 male and 60 female patients aged from 18 to 74 years. The diagnoses included cervical fracture in 47 patients, thoracic or lumbar fracture in 50 patients, cervical spondylopathy in 58 patients, spinal tuberculosis in 17 patients and spinal tumor in 5 patients. The X-ray and three-dimensional CT were followed up in all these patients to observe the spinal alignment, the rate of fusion and the rate of n-HA/PA66 cage subsidence and translocation. The neurological functions of patients with spinal fracture were evaluated by Frankel grading; the improvement of the clinical symptoms of the other patients were assessed by visual analogue scale (VAS) scores and Japan Orthopaedic Association (JOA) scores or SF-36 scores. All the 177 patients had been followed-up for 36 to 70 months after surgery (average 51 months). Except the slight cage translocation been found in the only one patient with cervical fracture, no cage prolapsed or breakage was exist in our patients up to the last follow-up. In the patients with spinal fracture, the mean time for fusion was 4.5 months, the rate of fusion was 95.9% and the rate of cage subsidence was 5.2%; while in the patients with cervical spondylopathy, the mean time for fusion was 4.4 months, the fusion rate was 96.5% and the subsidence rate was 5.2%; while in patients with spinal tuberculosis, the mean fusion time was 5.5 months, the rate of fusion was 94.0%, the rate of subsidence was 5.9%; and in the patients with tumor, the mean time for fusion was 6.0 months, the fusion rate was 100%, and the cage subsidence was found in only one patient. The preoperative symptoms of each patient were improved to varying degrees after surgery. At the last follow-up, the Frankel grading of patients of spinal fracture with incomplete paralysis improved 0 to 2 classes; the VAS, JOA or SF-36 scores of the other patients were improved significantly than their respective scores before surgery (t = 2.982, 4.126 and 3.980, P < 0.05). The n-HA/PA66 cage has much higher rate of osseous fusion and lower cage subsidence, it is an ideal cage which can provide effective restoring and maintaining for the spinal alignment and intervertebral height. Moreover, the mid-term clinical results of anterior reconstruction with this cage in the patients with spinal trauma, degeneration, tuberculosis or tumor are well content.

Spinal Reconstruction with Free Vascularised Bone Grafts; Approaches and Selection of Acceptor Vessels

The use of free vascularised bone grafts is an infrequently performed surgical technique for the reconstruction of spinal defects. This field of surgery brings many challenges concerning the choice of free vascularised bone graft, planning of the operative procedure and selection of recipient vessels. This study aims to report our experience with free vascularised bone grafts, with special emphasis on the surgical approach and the selection of recipient vessels. Over a period of 17 years (1994-2011), we used these grafts for anterior spinal reconstruction in 30 patients. In 28 patients, a free vascularised fibular graft was used, and in two cases a free vascularised iliac crest graft was used. The spinal segments reconstructed involved the cervical or cervicothoracic spine (6 cases), the thoracic spine (11 cases) and the thoracolumbar and lumbosacral spine (13 cases). Revascularisation of the free vascularised bone graft proved to be technically feasible in 30 patients, but failed in one fibular graft due to difficulties with recipient vessels in the lumbar region. Technical challenges were met with respect to the choice of the recipient vessel at various anatomical sites. Availability of acceptor vessels was highly de-pendant of the type of surgery (resection or stabilisation) and the selected surgical approach. Based on these findings, a preferred approach is given for each region. The use of free vascularised bone grafts is a valuable technique for the reconstruction of complex spinal disorders. Successful execution requires microvascular expertise with respect to graft harvesting and appropriate choice of recipient vessels. Adequate preoperative planning in a multidisciplinary setting and adherence to the basic principles for spinal reconstruction are required.

Dear Editor of Asian Spinal Journal

Dear Editor of Asian Spinal Journal, With regards to the letter from Dr. Mohamed El-Sayed Abdel-Wanis, which commented on our article entitled, Treatment of acute tuberculous spondylitis by the spinal shortening osteotomy: technical notes and case illustration, first of all, we need to confirm the originality of our surgical technique as it was true that we did not locate your article through the Medline literature article search describing this technique, which was published in the Journal of musculoskeletal research. Concerning the surgical technique, there were some differences between our technique and the technique presented by Dr. Mohamed. Dr. Mohamed has treated spinal infections (both bacterial and tuberculosis) with the posterior only approach, but he did limited spinal shortening and still used the anterior spinal reconstruction, which was in contrast to our technique that collapses the vertebral body against each other in order to create bone to bone contact which should promote bony healing and avoid the requirement of any anterior reconstruction. Moreover, in our technique, we do not encounter with progressive kyphosis and neurological deterioration. It is our pleasure to read the letter from Dr. Mohamed since we are treating tuberculosis with nearly the same technique, which should emphasize that this posterior only approach for the treatment of tuberculous spondilitis has some advantages over the others and thus should be the alternative approach regarding the treatment of this condition.

Occipitocervicothoracic stabilization in pediatric patients

Although rarely encountered, pediatric patients with severe cervical spine deformities and instability may occasionally require occipitocervicothoracic instrumentation and fusion. This case series reports the experience of 4 pediatric centers in managing this condition. Occipitocervical fixation is the treatment of choice for craniocervical instability that is symptomatic or threatens neurological function. In children, the most common distal fixation level with modern techniques is C-2. Treated patients maintain a significant amount of neck motion due to the flexibility of the subaxial cervical spine. Distal fixation to the thoracic spine has been reported in adult case series. This procedure is to be avoided due to the morbidity of complete loss of head and neck motion. Unfortunately, in rare cases, the pathological condition or highly aberrant anatomy may require occipitocervical constructs to include the thoracic spine. The authors identified 13 patients who underwent occipitocervicothoracic fixation. Demographic, radiological, and clinical data were gathered through retrospective review of patient records from 4 institutions. Patients ranged from 1 to 14 years of age. There were 7 girls and 6 boys. Diagnoses included Klippel-Feil, Larsen, Morquio, and VATER syndromes as well as postlaminectomy kyphosis and severe skeletal dysplasia. Four patients were neurologically intact and 9 had myelopathy. Five children were treated with preoperative traction prior to instrumentation; 5 underwent both anterior and posterior spinal reconstruction. Two patients underwent instrumentation beyond the thoracic spine. Allograft was used anteriorly, and autologous rib grafts were used in the majority for posterior arthrodesis. Follow-up ranged from 0 to 43 months. Computed tomography confirmed fusion in 9 patients; the remaining patients were lost to follow-up or had not undergone repeat imaging at the time of writing. Patients with myelopathy either improved or stabilized. One child had mild postoperative unilateral upper-extremity weakness, and a second child died due to a tracheostomy infection. All patients had severe movement restriction as expected. Occipitocervicothoracic stabilization may be employed to stabilize and reconstruct complex pediatric spinal deformities. Neurological function can be maintained or improved. The long-term morbidity of loss of cervical motion remains to be elucidated.

A simple method for making a hollow cylindrical polymethylmethacrylate strut for cervical spinal reconstruction

The purpose of this study was to introduce a method for making a hollow cylindrical polymethylmethacrylate (PMMA) strut for perioperative anterior spinal reconstruction after discectomy and/or corpectomy. For use after anterior cervical discectomy or corpectomy, the authors created a hollow cylindrical PMMA strut using 10- and 3-ml disposable plastic syringes filled with PMMA containing 10% BaSO(4) for anterior spinal reconstruction. With this method, the authors were able to make a PMMA strut that was approximately 50 mm in length with a 14-mm outer diameter and a 10-mm inner diameter. The PMMA strut could easily be cut with a saw to any desired length and molded with a cutting bur. The PMMA strut was used as a substitute for the cortical bone and was filled with bone graft for cervical spinal reconstruction after discectomy and/or corpectomy. The whole process of making the PMMA strut can be completed within 30 minutes, and it reduces costs by at least $1000 US (in 1-level discectomy), making the procedure cost effective. It is simple to make a hollow cylindrical PMMA strut with plastic syringes during a discectomy and/or corpectomy. The strut can provide adequate support at less cost than other methods. The hollow cylindrical strut is also of suitable size and length for anterior spinal reconstruction. It serves as an alternative for patients who cannot afford the expense of similar instruments or who cannot or do not want to take the risk of a human graft for anterior spinal reconstruction.

Application of a crescent-shaped pmma strut in anterior spinal reconstruction of thoracolumbar and lumbar burst fractures: a new technique

Our aim was to evaluate the safety and efficacy of the novel crescent-shaped PMMA strut for anterior spinal reconstruction and fusion in patients with thoracolumbar bust fractures. The surgical results using this technique are reviewed. Six patients suffering thoracolumbar and lumbar fracture using a crescent-shaped PMMA strut combined with fixation for reconstruction of the anterior spinal column. Postoperative radiographic, included plain x-ray and 3-D computed tomography (CT) imaging, evaluated fusion status postoperatively. Pain relief and neurological status was assessed by comparing Frankel Score and Vision Analogue Score (VAS) pre- and postoperatively. All six patients achieved immediate stabilization. No patient needs additional posterior instrumentation stabilization due to loss of sagittal alignment and kyphosis deformity. All patients achieved significant relief of back pain, improvement of neurological function, correction of preoperative deformity and excellent bone fusion results documented on plain x-rays and 3-D CT reconstruction imaging. There were no complications of neurological worsening, wound infection, subsidence and dislodgement of PMMA strut, or anterior instrumentation failure during the follow-up. The crescent-shaped PMMA strut is an alternative for anterior spinal reconstruction and fusion in patients with thoracolumbar burst fracture. However, the long-term clinical effects and possible complications need further evaluation.

Application of an antibiotic crescent-shaped polymethylmethacrylate strut in thoracic vertebral tuberculosis

Spinal tuberculosis accounts for up to 50% of all cases with musculoskeletal tuberculosis. In patients needing surgical treatment, the use of anterior instrumentation offers the theoretical advantage of more complete debridement and decompression, safer mobilization and reliable deformity correction. However, the placement of instrumentation in an infected area remains a matter of debate. We present a patient with thoracic vertebral tuberculosis using an antibiotic crescent-shaped PMMA strut for spinal reconstruction and fusion. The patient recovered satisfactory and no complication was observed in the follow-up. The antibiotic crescent-shaped PMMA strut can be used as a carrier for antibiotic drug and an ideal alternative for anterior spinal reconstruction. However, long-term outcome in this case requires further evaluation.

Cervicothoracic junction kyphosis: surgical reconstruction with pedicle subtraction osteotomy and Smith-Petersen osteotomy

Sagittal plane deformities can be subdivided into kyphotic and lordotic forms and further characterized according to their global or regional (focal) presentation. Regional deformities of a significant magnitude constitute a gibbous deformity. Pedicle subtraction osteotomy (PSO) and interlaminar Smith-Petersen osteotomies have been used to correct sagittal plane deformities in the cervical, thoracic, and lumbar spine. By resecting a portion of the vertebral body and closing in the gap of this vertebra, the spine is placed in local lordosis and kyphosis is corrected. These osteotomies have generally been carried out in the lumbar or less frequently in the thoracic area. While PSO has been performed in the mid and lower thoracic spine, there have been no case series of patients undergoing PSO at the CTJ. Specifically, a PSO approach that addresses the challenges of the CTJ is needed. Here, the authors review their case series of PSOs performed in the CTJ. Their goal in the treatment of these patients was to correct the regional CTJ kyphosis, restore forward gaze, and reduce the pain associated with the deformity. Eight patients (5 males and 3 females, mean age 63 years) underwent PSO for the correction of CTJ kyphosis. Pedicle subtraction osteotomy was performed at C-7 or the upper thoracic vertebrae and was facilitated by a computer-guided intraoperative monitoring system. Surgical indications included postlaminectomy kyphosis, spinal cord tumor resection, posttraumatic kyphosis, and degenerative cervical spondylosis. The mean follow-up was 15.3 months (range 12-20 months), and the mean preoperative CTJ kyphosis was 38.67° (range 25°-60°). Clinically satisfactory correction of the regional deformity was accomplished in all patients, achieving a mean correction of 35.63° (range 15°-66°) at the CTJ, with restoration of forward gaze and significant reduction in pain. A CTJ deformity is a distinctive form of kyphosis that presents as a variable local deformity and requires complex spinal reconstructive techniques to restore sagittal balance and forward gaze. Pedicle subtraction osteotomy allows for significant correction through one spinal segment, and it can be used safely to correct the regional sagittal alignment of the cervical spine and head in relation to the pelvis. Pedicle subtraction osteotomy can be used alone or in combination with other techniques as some patients may require multistage procedures with anterior and posterior spinal reconstruction to obtain stable sagittal correction. All deformities in these patients were kyphotic in nature with only mild elements of scoliosis or coronal plane deformity. This is unlike lumbar and thoracic curves where the kyphosis is frequently associated with scoliosis.

Role of Major Spine Surgery Using Kaneda Anterior Instrumentation for Osteoporotic Vertebral Collapse

A retrospective study. To investigate the clinical and radiographic results of spinal reconstruction using Kaneda anterior spinal instrumentation for osteoporotic vertebral collapse. Recent advances in osteoporotic vertebral fracture treatment including kyphoplasty changes the role of major surgery for these pathologies. However, osteoporotic vertebral collapse with neurologic compromise remains requiring surgical decompression and reconstruction. Thirty-one consecutive patients who underwent anterior spinal reconstruction for osteoporotic vertebral collapse with neurologic deficits were reviewed retrospectively. Twenty-six patients had single vertebral collapse and 5 had multiple lesions. They were 10 males and 21 females with mean age of 71 years. Mean follow-up period was 57 months. For anterior column support, iliac bone graft was used in 1 patient, cylindrical titanium cages in 12, and bioactive ceramic spacers in 18 patients. Kaneda anterior instrumentation was used in all the patients. Radiographic and clinical assessments were performed preoperatively and at the final follow-up. All the patients showed neurologic recovery. Visual analog scales (0 to 10) of low back pain and sciatic pain were 5.8 and 4.2 before surgery, and 2.1 and 0.6 at the final follow-up, respectively. Mean kyphosis of operative levels was 31 degrees before surgery, and improved to 13 degrees immediately after surgery and 21 degrees at the final follow-up. Posterior reinforcement was required in 6 patients (19%), who had severe osteoporosis and/or underwent multilevel corpectomies. Solid fusion was achieved in all patients at the final follow-up. The current study demonstrated the advantages of anterior spinal reconstruction in osteoporotic vertebral collapse: (1) safe and reliable decompression could be performed, and (2) 80% of patients were successfully treated with anterior spinal reconstruction alone. However, patients with multilevel corpectomies and/or severe osteoporosis highly required posterior reinforcement.