Anterior Cruciate Ligament Replacement Research Articles

2D and 3D PVA electrospun scaffold evaluation for ligament implant replacement: A mechanical testing, modelling and experimental biomechanics approach

The gold standard to characterise anterior cruciate ligament (ACL) implants is through the evaluation of mechanical properties such as Young's modulus or ultimate tensile stress. Currently, no studies have been performed to relate the in-vivo hyper-elastic behaviour of the ACL with the design of tissue engineered ligaments. The aim of this work is to determine the most comparable 2D/3D polyvinyl alcohol (PVA) electrospun structure to the in-vivo mechanical behaviour of the natural ligament. Biomechanics of 12 young participants were captured while daily and high impact activities were performed. A musculoskeletal knee model and kinematic data were used to estimate the in-vivo ACL length and strain. The in-vivo ACL tensile forces were determined with a non-linear force/strain relationship. 2D scaffolds, 1 twisted filament scaffolds, 3 twisted filaments scaffolds and 3 twisted/braided filaments scaffolds were fabricated using electrospinning and characterised morphologically and mechanically using scanning electron microscopy and tensile testing respectively. Cyclic tensile and shear tests were performed in dry and wet conditions to crosslinked and non-crosslinked samples. The hyper-elastic behaviour of our PVA scaffolds was characterised with the Mooney Rivlin model and a non-linear string-based model, and both models compared with the in-vivo mechanical behaviour of the native ACL. Crosslinked 3 twisted/braided filaments scaffolds faithfully mimicked the morphology and the hyper-elastic behaviour of the natural ACL, showed a good resistance to shear loading and remained undegraded in phosphate-buffer saline solution. This study demonstrated, for the first time, that 3 twisted/braided filaments PVA electrospun scaffolds have an excellent potential for ACL replacements.

The effect of sterilization and storage on the viscoelastic properties of human tendon allografts – Continued: Storage for 0 to 4 months

The role of donor-derived tendons, also known as allografts, in anterior cruciate ligament replacement surgeries is steadily increasing. Before surgery, temporary storage and, in most cases, sterilization are essential. It is, thus, crucial to determine how these procedures alter the grafts’ biomechanical properties. The purpose of this research was to analyze the effect of different sterilization methods (native, frozen, frozen + 21 kGy gamma irradiation, frozen + 21 kGy electron beam irradiation) and storage durations (0 to 4 months) on the deformation and creep of two tendon types (tibialis anterior, peroneus longus). 80 tibialis anterior and 83 peroneus longus tendons from 51 human cadavers were included. The samples were removed, placed in a radio-cryoprotectant solution, then slowly cooled, sterilized and stored at −80 °C. All groups were subject to 60 s static creep test with 250 N load. Deformation during the loading phase, creep during static loading, and the ratio of these two were evaluated.Deformation at the end of the loading phase and creep consistently exhibited significantly smaller values in the tibialis anterior compared to the peroneus longus type, as well as in electron beam-sterilized grafts as opposed to gamma beam-sterilized ones. Prolonged storage periods (within 0 to 4 months) resulted in a notable increase in these values, particularly in deformation. Based on the experimental data, the tibialis anterior tendon type and sterilization by gamma beam irradiation are better choices for anterior cruciate ligament reconstruction than the peroneus longus and sterilization by electron beam. Increased storage time affects negatively the evaluated mechanical properties.

Hierarchical helical carbon nanotube fibre as a bone-integrating anterior cruciate ligament replacement.

High rates of ligament damage require replacements; however, current synthetic materials have issues with bone integration leading to implant failure. Here we introduce an artificial ligament that has the required mechanical properties and can integrate with the host bone and restore movement in animals. The ligament is assembled from aligned carbon nanotubes formed into hierarchical helical fibres bearing nanometre and micrometre channels. Osseointegration of the artificial ligament is observed in an anterior cruciate ligament replacement model where clinical polymer controls showed bone resorption. A higher pull-out force is found after a 13-week implantation in rabbit and ovine models, and animals can run and jump normally. The long-term safety of the artificial ligament is demonstrated, and the pathways involved in integration are studied.

Characterisation of native and decellularised porcine tendon under tension and compression: A closer look at glycosaminoglycan contribution to tendon mechanics

Decellularised porcine superflexor tendon (pSFT) has been characterised as a suitable scaffold for anterior cruciate ligament replacement, with dimensions similar to hamstring tendon autograft. However, decellularisation of tissues may reduce or damage extracellular matrix components, leading to undesirable biomechanical changes at a whole tissue scale. Although the role of collagen in tendons is well established, the mechanical contribution of glycosaminoglycans (GAGs) is less evident and could be altered by the decellularisation process. In this study, the contribution of GAGs to the tensile and compressive mechanical properties of pSFT was determined and whether decellularisation affected these properties by reducing GAG content or functionality.PSFTs were either enzymatically treated using chondroitinase ABC to remove GAGs or decellularised using previously established methods. Native, GAG-depleted and decellularised pSFT groups were then subjected to quantitative assays and biomechanical characterisation. In tension, specimens underwent stress relaxation and strength testing. In compression, specimens underwent confined compression testing.The GAG-depleted group was found to have circa 86% reduction of GAG content compared to native and decellularised groups. There was no significant difference in GAG content between native (3.75 ± 0.58 μg/mg) and decellularised (3.40 ± 0.37 μg/mg) groups. Stress relaxation testing discovered the time-independent and time-dependent relaxation moduli of the decellularised group were reduced ≥50% compared to native and GAG-depleted groups. However, viscoelastic behaviour of native and GAG-depleted groups resulted similar. Strength testing discovered no differences between native and GAG-depleted group's properties, albeit a reduction ∼20% for decellularised specimens' linear modulus and tensile strength compared to native tissue. In compression testing, the aggregate modulus was found to be circa 74% lower in the GAG-depleted group than the native and decellularised groups, while the zero-strain permeability was significantly higher in the GAG-depleted group (0.86 ± 0.65 mm4/N) than the decellularised group (0.03 ± 0.04 mm4/N).The results indicate that GAGs may significantly contribute to the mechanical properties of pSFT in compression, but not in tension. Furthermore, the content and function of GAGs in pSFTs are unaffected by decellularisation and the mechanical properties of the tissue remain comparable to native tissue.

3D-Braided Poly-ε-Caprolactone-Based Scaffolds for Ligament Tissue Engineering.

The anterior cruciate ligament (ACL) is the most commonly injured intra-articular ligament of the knee. Due to its limited intrinsical healing potential and vascularization, injuries of the ACL do not heal satisfactorily, and surgical intervention is usually required. The limitations of existing reconstructive grafts and autologous transplants have prompted interest in tissue-engineered solutions. A tissue engineering scaffold for ACL reconstruction must be able to mimic the mechanical properties of the native ligament, provide sufficient porosity to promote cell growth of the neoligament tissue, and be biodegradable. This study investigates long-term biodegradable poly-ε-caprolactone (PCL)-based scaffolds for ACL replacement using the 3D hexagonal braiding technique. The scaffolds were characterized mechanically as well as morphologically. All scaffolds, regardless of their braid geometry, achieved the maximum tensile load of the native ACL. The diameter of all scaffolds was lower than that of the native ligament, making the scaffolds implantable with established surgical methods. The 3D hexagonal braiding technique offers a high degree of geometrical freedom and, thus, the possibility to develop novel scaffold architectures. Based on the findings of this study, the 3D-braided PCL-based scaffolds studied were found to be a promising construct for tissue engineering of the anterior cruciate ligament.

Influence of Anaesthesia on Harvesting the Semitendinosus Tendon for Anterior Cruciate Ligament Replacement.

Aim The aim of the study was to investigate if the mode of anesthesia is a relevant factor influencing the length of the semitendinosus tendon harvested for anterior cruciate ligament (ACL) replacement. Methods Patients undergoing ACL replacement were given the choice between spinal and general anesthesia. If general anesthesia was chosen, a short relaxation period was applied while harvesting the Semitendinosus (ST) tendon. The data for tendon length, the folding factor, and the diameter of the graft were collected. Except for redo procedures and ACL replacement with allograft all patients undergoing an ACL replacement were enrolled. Results Thirty-one patients with general anesthesia (GA) and 14 patients with spinal anesthesia (SA) were examined. The ST tendon length was 29.03 cm ± 2.6 cm in the GA group and 25.4 cm ± 2.70 in the SA group(t value 4.245, p=0.0001). The ST tendon could be quadrupled in 23 patients in the GA and 6 patients in the SA group (χ2=4.13, p=0.04). The graft diameter obtained was 8.53 mm ± 0.62 mm in the GA group and 7.71 mm ± 0.47 mm in the SA group (t value 4.885, p<0.0001). Conclusion General anesthesia with short-time relaxation while harvesting the ST tendon for ACL grafting allows to harvestlonger ST tendons and consequently yields better results regarding the graft dimensions and should be offered to patients as a first-choice procedure. There is no other paper published yet, analyzing this relationship and if validated on a larger cohort, this might change clinical practice.

Feasibility study of oxidized naringin as a novel crosslinking agent for crosslinking decellularized porcine Achilles tendon and its potential application for anterior cruciate ligament repair.

Naringin (Nar), a natural flavanone glycoside, has been shown to possess a variety of biological activities, including anti-inflammatory, anti-apoptotic, bone formation, and so forth. In this study, Nar was oxidized by sodium periodate and the oxidized naringin (ONar) was used as a novel biological crosslinking agent. In addition, ONar-fixed porcine decellularized Achilles tendon (DAT) was developed to substitute anterior cruciate ligament (ACL) for researching a novel ACL replacement material. The ONar with a 24 h oxidation time had appropriate aldehyde group content, almost no cytotoxicity, and a good crosslinking effect. The critical characteristics and cytocompatibility of ONar-fixed DAT were also investigated. The results demonstrated that 1% ONar-fixed DAT exhibited good resistance to enzymatic degradation and thermal stability as well as suitable mechanical strength. Moreover, 1% ONar-fixed specimens exhibited excellent L929 fibroblasts-cytocompatibility and MC3T3-E1-cytocompatibility. They also promoted the secretion of hepatocyte growth factor (HGF) and basic fibroblast growth factor (bFGF) from fibroblasts and bone morphogenetic protein-2 (BMP-2) from osteoblasts. And they also showed the good anti-inflammatory properties in vivo experiments. Our data provided an experimental basis for ONar as a new cross-linking reagent in chemical modification of DAT and ONar-fixed DAT for ACL repair.

Bioinspired Silk Fibroin-Based Composite Grafts as Bone Tunnel Fillers for Anterior Cruciate Ligament Reconstruction.

Anterior cruciate ligament (ACL) replacement is still a big challenge in orthopedics due to the need to develop bioinspired implants that can mimic the complexity of bone-ligament interface. In this study, we propose biomimetic composite tubular grafts (CTGs) made of horseradish peroxidase (HRP)-cross-linked silk fibroin (SF) hydrogels containing ZnSr-doped β-tricalcium phosphate (ZnSr-β-TCP) particles, as promising bone tunnel fillers to be used in ACL grafts (ACLGs) implantation. For comparative purposes, plain HRP-cross-linked SF hydrogels (PTGs) were fabricated. Sonication and freeze-drying methodologies capable of inducing crystalline β-sheet conformation were carried out to produce both the CTGs and PTGs. A homogeneous microstructure was achieved from microporous to nanoporous scales. The mechanical properties were dependent on the inorganic powder’s incorporation, with a superior tensile modulus observed on the CTGs (12.05 ± 1.03 MPa) as compared to the PTGs (5.30 ± 0.93 MPa). The CTGs presented adequate swelling properties to fill the space in the bone structure after bone tunnel enlargement and provide a stable degradation profile under low concentration of protease XIV. The in vitro studies revealed that SaOs-2 cells adhered, proliferated and remained viable when cultured into the CTGs. In addition, the bioactive CTGs supported the osteogenic activity of cells in terms of alkaline phosphatase (ALP) production, activity, and relative gene expression of osteogenic-related markers. Therefore, this study is the first evidence that the developed CTGs hold adequate structural, chemical, and biological properties to be used as bone tunnel fillers capable of connecting to the ACL tissue while stimulating bone tissue regeneration for a faster osteointegration.

Melt-Spun, Cross-Section Modified Polycaprolactone Fibers for Use in Tendon and Ligament Tissue Engineering

Tissue Engineering is considered a promising route to address existing deficits of autografts and permanent synthetic prostheses for tendons and ligaments. However, the requirements placed on the scaffold material are manifold and include mechanical, biological and degradation-related aspects. In addition, scalable processes and FDA-approved materials should be applied to ensure the transfer into clinical practice. To accommodate these aspects, this work focuses on the high-scale fabrication of high-strength and highly oriented polycaprolactone (PCL) fibers with adjustable cross-sectional geometry and degradation kinetics applying melt spinning technology. Four different fiber cross-sections were investigated to account for potential functionalization and cell growth guidance. Mechanical properties and crystallinity were studied for a 24-week exposure to phosphate-buffered saline (PBS) at 37 °C. PCL fibers were further processed into scaffolds using multistage circular braiding with three different hierarchical structures. One structure was selected based on its morphology and scaled up in thickness to match the requirements for a human anterior cruciate ligament (ACL) replacement. Applying a broad range of draw ratios (up to DR9.25), high-strength PCL fibers with excellent tensile strength (up to 69 cN/tex) could be readily fabricated. The strength retention after 24 weeks in PBS at 37 °C was 83–93%. The following braiding procedure did not affect the scaffolds’ mechanical properties as long as the number of filaments and the braiding angle remained constant. Up-scaled PCL scaffolds resisted loads of up to 4353.88 ± 37.30 N, whilst matching the stiffness of the human ACL (111–396 N/mm). In conclusion, this work demonstrates the fabrication of highly oriented PCL fibers with excellent mechanical properties. The created fibers represent a promising building block that can be further processed into versatile textile implants for tissue engineering and regenerative medicine.

Second Generation of Tissue-Engineered Ligament Substitutes for Torn ACL Replacement: Adaptations for Clinical Applications.

The anterior cruciate ligament (ACL) of the knee joint is one of the strongest ligaments of the body and is often the target of traumatic injuries. Unfortunately, its healing potential is limited, and the surgical options for its replacement are frequently associated with clinical issues. A bioengineered ACL (bACL) was developed using a collagen matrix, seeded with autologous cells and successfully grafted and integrated into goat knee joints. We hypothesize that, in order to reduce the cost and simplify the model, an acellular bACL can be used as a substitute for a torn ACL, and bone plugs can be replaced by endobuttons to fix the bACL in situ. First, acellular bACLs were successfully grafted in the goat model with 18% recovery of ultimate tensile strength 6 months after implantation (94 N/mm2 vs. 520). Second, a bACL with endobuttons was produced and tested in an exvivo bovine knee model. The natural collagen scaffold of the bACL contributes to supporting host cell migration, growth and differentiation in situ post-implantation. Bone plugs were replaced by endobuttons to design a second generation of bACLs that offer more versatility as biocompatible grafts for torn ACL replacement in humans. A robust collagen bACL will allow solving therapeutic issues currently encountered by orthopedic surgeons such as donor-site morbidity, graft failure and post-traumatic osteoarthritis.

Role of Anthropometric Data in Assessing Hamstring Graft Size in Anterior Cruciate Ligament Reconstruction

Background and Objective: Preoperative information of hamstring graft size for anterior cruciate ligament reconstruction (ACL) is critical for making optimal graft selections. The aim of the present study was to view whether anthropometric parameters including height, weight, BMI and thigh circumference have any bearing on the size of hamstring tendon grafts used in anterior cruciate ligament replacement.&#x0D; Methods: Pre-operative anthropometric measurements were taken on 72 patients undergoing primary ACL reconstruction, including age, gender, height, weight, BMI, and thigh circumference. The Person correlation coefficient was used to assess the correlation of these anthropometric variables and simple logistic regression was used to evaluate the correlation of these anthropometric variables on the size of the graft that was acquired.&#x0D; Results: Gracilis tendon [GT] length correlates with height (r 1/4 0,432), and semitendinosus [ST] length correlates with thigh circumference (r 1/4 0,255). Women's graft diameter (7.16 ± 0.82 mm) smaller than that of men (7.39 ± 0.63 mm) (p &gt; 0.05), although not statistically significant. The diameter of the autograft was shown to be strongly linked with parameters.&#x0D; Conclusion: As a consequence, our findings suggest that anthropometric measures can be used in the preoperative planning and prediction of hamstring graft length and diameter in anterior cruciate ligament reconstruction.

Assessment of sheep knee joint after ACL replacement with Achilles tendon autograft and PLA-based implant

In this study, we propose a new approach in the anterior cruciate ligament (ACL) replacement to provide stability and integration with bone tunnel. A polylactide (PLA)-based tubular implant was used to support the graft stabilization in femoral and tibial bones and to stimulate the healing process after (ACL) replacement on a sheep model. The ACL was replaced with an autologous Achilles tendon split graft. The tendon-to-bone healing in the model was analyzed after 6 and 12 weeks. Two groups of animals were compared, i.e. the group with the PLA-based implant used in the ACL replacement and the control group without the implant. The knee joints were mechanically and clinically evaluated, including the histopathology tests, to determine their stability and integrity. The results indicated that the bioresorbable PLA-based tubular implant may facilitate integration of the tendon graft with bone. Remodeling the allograft inside the implant improves the joint mobility from the first week of healing: no pathological changes were observed at the surgery site and in the animals’ mobility. After 6 and 12 weeks of healing no significant changes in the mechanical parameters of the knee joint were observed, regarding the joint failure force, knee displacement, angular mobility range and joint stiffness. Relatively small values of the non-destructive tests in the knee displacement, already 6 weeks after surgery, indicated the early stabilization of the knee joint. The studies showed that the failure forces of knee joints after the ACL replacement with the PLA-based implant are lower than those of an intact joint, although their biomechanical features, including strain-at- failure, are similar.The biomechanical parameters of the knee joint were significantly improved due to the selected method of attaching the autograft ends to the femoral and tibial bone surfaces. After 12 weeks the intra-tunnel tendon-bone site with the PLA implant revealed the better tibia-femur joint mechanical stability, linear force-strain function and the decreasing strain-to-failure value, as compared to the control group.

Integration and functional performance of a decellularised porcine superflexor tendon graft in an ovine model of anterior cruciate ligament reconstruction

The objective was to evaluate the performance of decellularised porcine superflexor tendon (pSFT) as an anterior cruciate ligament (ACL) reconstruction device. The ACL of adult sheep was reconstructed with decellularised pSFT or ovine allograft SFT and animals sacrificed at 4, 12 and 26 weeks (n = 4 per group) for biological evaluation and 26 weeks (n = 6) for biomechanical evaluation of the grafts. Both grafts showed good in vivo performance with no major differences at macroscopic evaluation post euthanasia. Histopathology revealed an inflammatory reaction to both grafts at 4 weeks, which reduced by 26 weeks. There was advanced cellular ingrowth from 12 weeks, ligamentisation of intra-articular grafts, ossification and formation of Sharpey's fibers at the graft/bone junctions. Immunohistochemistry showed that at 4 and 12 weeks, the host response was dominated by CD163+ M2 macrophages and a cell infiltrate comprising α-SMA + myofibroblasts, CD34+ and CD271+ progenitor cells. At 26 weeks the biomechanical properties of decellularised pSFT and oSFT grafts were comparable, with all grafts failing in the intra-articular region. This study provides new insight into constructive remodelling of tendons used for ACL replacement and evidence of integration and functional performance of a decellularised xenogeneic tendon with potential as an alternative for ACL reconstruction.

The effect of sterilization and storage on the viscoelastic properties of human tendon allografts

Allografts have become increasingly preferred for anterior cruciate ligament replacement purposes. The risk of infections necessitates thorough sterilization procedures, and the allografts usually need to be stored prior to surgery. Classical mechanical tests have been performed with various types of tendons, however, tibialis anterior and peroneus longus tend to suffer the least biomechanical changes after irradiation. Only few results are available of the strain and creep behaviour of tendons, even though this information is necessary to provide suitable allografts. The aim of the present study is to analyze the effect of different tendon types (T-tibialis anterior, P-peroneus longus), sterilization methods (G-gamma irradiation of 21 kGy, E-electron beam irradiation of 21 kGy) and storage times (5 and 6 months) on the creep behavior, which is characterized by the strain at the end of the loading phase and creep deformation after static loading. Static creep tests were performed with 250 N load during 60 s. Deformation at the end of the loading phase of both tendons was significantly smaller after 5 months long storage than that after 6 months long storage. TE5 showed significantly less creep than group TE6, and TE6 significantly greater than PE6. The creep of TE5 was significantly lower than that of TG5. Based on the data, the peroneus longus sterilized by electron beam and stored deep frozen for 5 months is a better choice for anterior cruciate ligament reconstruction than tibialis anterior sterilized by gamma irradiation stored for 6 months.

Nanomaterials and repair of basketball sports ligament injury

Nanomaterials are solid systems composed of 1–100 nm particles. These systems usually include nanomaterial sensors, nanomolecules, imaging technology, drug transportation, and DNA delivery. Therefore, nanomaterials are widely used in biomedicine, biochemical analysis, mechanics, and magnetism. Based on the above background, this paper mainly studies the application of nanomaterials in the repair of basketball sports ligament injury. In this paper, the nanomaterials used in medical treatment were analyzed, and the polyacrylonitrile based carbon fiber was selected to replace the anterior cruciate ligament (ACL). In this paper, based on polyacrylonitrile based carbon fiber for ACL replacement surgery in rabbits, the drawer test, IKDC score, and Lysholm score were compared between the rabbits after operation and those in the control group. The experiment proved that the function of the left knee joint was gradually restored after the ACL was excised and replaced by polyacrylonitrile based carbon fiber. After 8 weeks, the function of the left knee joint recovered 90%, which proved the feasibility of polyacrylonitrile based carbon fiber in the repair of anterior cruciate ligament injury.

Synthesis of silver @hydroxyapatite nanoparticles based biocomposite and their assessment for viability of Osseointegration for rabbit knee joint anterior cruciate ligament rehabilitation

In this examination, chitosan-silk fibroin/polyethylene terephthalate (CTS-SF/PET), chitosan-silk fibroin/polyethylene terephthalate/hydroxyapatite (CTS-SF/PET/HAP) and chitosan-silk fibroin/polyethylene terephthalate/Silver @hydroxyapatite (CTS-SF/PET/Ag@HAP) scaffolds were prepared by utilizing the plasma splashing procedure. Field emission scanning electron microscopy (FESEM) results demonstrated that the outside of the PET covered with HAP nanoparticles. The cell viability results demonstrated that the number of Mesenchymal stem cells (MSCs) primarily spread out on CTS-SF/PET/Ag@HAP. RT-PCR results demonstrated that there was an upregulated mRNA articulation of osseous development-related properties in the CTS-SF/PET/Ag@HAP composite. The in vivo rabbit animal assessment scores of the CTS-SF/PET/Ag@HAP composite were significantly better than those of the CTS-SF/PET at 1 to 3 months. Both in-vivo and in-vitro results exhibited in this investigation recommend that the cytocompatibility and osseointegration of CTS-SF/PET/Ag@HAP tendon were fundamentally improved by expanding the multiplication of cells and up-regulating the outflow of tendon development-related properties. In conclusion, the CTS-SF/PET/Ag@HAP tendon is a promising candidate for Anterior Cruciate Ligament (ACL) replacement in the future.

Soft Tissue Fixation Strategies of Human Quadriceps Tendon Grafts: A Biomechanical Study

To evaluate the effects of different stitching methods and suture diameters on the graft fixation of soft tissue human quadriceps tendon grafts for anterior cruciate ligament (ACL) reconstruction. The Krackow locking stitch (K), whipstitch (W), and baseball stitch (B) were combined with either a 2× no. 2 (#2) or a 1× no. 5 (#5) braided composite suture for graft fixation of 36 human quadriceps tendons in 6 groups. Biomechanical testing was performed using a cyclic protocol with loads between 0 and 100N. The maximum load until failure, cyclic elongation, and failure mode were recorded. The highest mean maximum load to failure was observed in the 2 Krackow stitch groups. The K#2 group had significantly higher load to failure values compared with those of the W#2 and B#2 groups (K#2, 553 ± 82N vs W#2, 392 ± 107N, P= .0349; K#2 vs B#2 366 ± 118N, P= .0129). The mean cyclic elongation was lowest in the Krackow groups (K#2, 10.59 ± 2.63mm; K#5, 13.66 ± 2.3mm). The regular failure mode was the rupture of the suture for the Krackow stitch (8 of 12) and suture pullout for the whipstitch (11 of 12) and baseball stitch groups (12 of 12). The double Krackow stitch with no. 2 braided composite suture exhibits a high maximum load to failure combined with a low amount of elongation in a biomechanical study for human quadriceps tendon soft tissue graft fixation. Unlike the whipstitch and the baseball stitch, it can solidly prevent suture pullout. A safe soft tissue graft fixation technique is especially important for quadriceps tendon grafts with their laminar anatomical structure and physiologically varying diameter. Unlike other grafts for ACL replacement, it fully relies on the soft tissue suture fixation to resist the pullout force.

Primary revision with replasty of the anterior cruciate ligament

Restoration of knee stability after rerupture of an anterior cruciate ligament (ACL) graft. Acute and chronic functional instability with rerupture of an ACL graft with subjective instability with anatomical or non-anatomical bone tunnel without tunnel widening. Partial anatomical bone tunnels of the previous operation, significant tunnel widening of anatomical bone tunnels, local infection of the knee joint, local soft tissue damage. Graft choices are hamstring tendons (semitendinosus muscle, gracilis muscle), the quadriceps tendon, patellar tendon and aperoneus tendon split graft. In cases with anatomical tunnels, careful debridement is performed down to the tunnel wall.In non-anatomical tunnels, anew femoral tunnel is drilled over adeep anteromedial portal with the knee flexed more than 110° in the insertion area of the ACL.Using drills and dilators, atunnel is prepared.At the tibia, the anterior horn of the lateral meniscus serves as alandmark in the absence of an ACL stump.The cortical tibial tunnel aperture is probed with aguide wire and the tunnel is drilled stepwise until the tunnel wall is reached, which is debrided with aspoon or synovial resector to remove graft residues and implants from the tunnel.The femoral fixation can either be done with aflip button, an interference screw or in the case of abone block graft implant-free. At the tibial side, the graft is fixed with aresorbable interference screw and fixation button. The rehabilitation program comprises 4-5phases. Inflammatory phase (weeks1-2): control of pain and swelling (cooling, isometric tension exercises, 20 kg partial load). Phase2 (weeks 2-6): increasing load and range of motion with closed chain exercises (target: extension/flexion 0-0-120°). Phase3 (from week6): strength and coordination exercises. Phase4: balance, strength and jump exercises. Return to competitive sport not before postoperative month 6-10. Included were 51patients with recurrent instability after ACL surgery where primary ACL replacement was performed with ipsilateral bone quadriceps tendon graft or contralateral semitendinosus-gracilis graft. All patients had anatomical or non-anatomical tunnel locations without significant widening (>11 mm). After 2years, the side-to-side difference for anterior tibial translation measured with the KT 1000 arthrometer was 2.0 ± 1.2 mm for the quadriceps group and 3.0 ± 2.9 mm for the semitendinosus-gracilis group (P = 0.461). No difference in the rate of positive pivot shift tests (P = 0.661); no significant difference in the individual Knee Injury and Osteoarthritis Outcome Score (KOOS) subscores or in the frequency of anterior knee pain.

GRAFT CHOICE FOR ADOLESCENT ATHLETES RETURNING TO HIGH-RISK SPORTS: A MATCHED COHORT ANALYSIS OF PATELLAR TENDON AND HAMSTRING AUTOGRAFTS

Background: Graft selection for skeletally mature adolescents undergoing anterior cruciate ligament (ACL) reconstruction is guided by surgeon and patient preference. In young patients returning to high-risk cutting and pivoting sports, graft rupture is the most feared complication of ACL reconstruction. Some studies have demonstrated slightly lower rates of graft failure and decreased laxity in the short term associated with patellar tendon (BTB) autografts as compared to hamstring (HS) autografts, but these studies are limited by their heterogeneity of ages and activity level1-3. The purpose of this study is to compare the rates of graft failure between BTB and HS ACL reconstruction cohorts matched by age, sex, and sport. Methods: A single-institution retrospective review was performed of consecutive patients less than 19 years of age treated with ACL reconstructions using either patellar tendon (BTB) or hamstring (HS) autograft performed by a single surgeon. Skeletally mature or nearly mature patients in “high-risk” ACL injury sports (basketball, football, soccer, lacrosse, and gymnastics) were initially treated with hamstring autografts but the graft preference transitioned to BTB autografts as the preferred graft choice during the study period. This transition in graft preference for adolescents participating in “high risk” sports allows for a comparison of outcomes based on graft types. Inclusion criteria were ages 13 – 18 years, participation in a “high risk” sport, and minimum 6-month follow-up. The two cohorts of patients were matched by age, gender, and sport. The primary outcome measure was graft rupture. Results: One hundred fifty-two patients with an average age of 16 years (range 13 – 18 years) underwent ACL reconstruction during the study period. There were 71 BTB reconstructions and 81 HS reconstructions. There were 64 females and 88 males. There was no difference in age, sex, BMI, or laterality between groups. There were more patients who played soccer in the BTB cohort (44%) vs HS cohort (20%) and fewer who played basketball in the BTB cohort (24%) vs HS cohort (41%), p = 0.005. There were no differences between the BTB and HS cohorts in terms of meniscus tears (61% v 72%, p = 0.15), meniscus repair (21% v 32%, p = 0.13), or partial meniscectomy (32% v 33%, p = 0.90). Mean duration of follow-up was 28 months (range 7-57 months). There was no difference in follow-up between cohorts (BTB 28 months and HS 29 months, p = 0.19). There were a total of 16 graft ruptures (10.5%). There was no difference in the rate of graft rupture between cohorts (BTB 8.5% vs HS 12.3%, p = 0.60). Mean time to graft rupture was 21 months (range 8 – 35 months) and Kaplan-Meier survival curves demonstrated no difference between cohorts. Conclusions: ACL reconstruction in adolescents returning to high-risk sports can be performed utilizing BTB or HS autografts with similar rates of graft rupture. There is a trend toward lower rates of graft rupture associated with BTB autografts, but additional patients will be necessary to determine if this trend will become a statistically significant difference. Beynnon BD, Johnson RJ, Fleming BC, et al. Anterior cruciate ligament replacement: comparison of bone-patellar tendon bone grafts with two-strand hamstring grafts. A prospective, randomized study. J Bone Joint Surg Am 2002;84(9):1503-1513. Ho B, Edmonds EW, Chambers HG et al. Risk factors for early ACL reconstruction failure in pediatric and adolescent patients: a review of 561 cases. J Pediatr Orthop 2016. Samuelsen BT, Webster KE, Johnson NR, et al. Hamstring autograft versus patellar tendon autograft for ACL reconstruction: is there a difference in graft failure rate? A meta-analysis of 47,613 patients. Clin Orthop Relat Res 2017;475(10):2459-2468.

Decellularisation affects the strain rate dependent and dynamic mechanical properties of a xenogeneic tendon intended for anterior cruciate ligament replacement

Development of new replacement grafts for anterior cruciate ligament (ACL) repair requires mechanical testing to ensure they can provide joint stability following implantation. A decellularised porcine superflexor tendon (pSFT) has been developed previously as an alternative to current reconstruction methods and subjected to biomechanical analysis. The application of varied strain rates to biological tissues is known to alter their biomechanical properties, however the effects of decellularisation on strain rate dependent and dynamic mechanical behaviour of tissues have not been explored. This study utilised tensile testing to investigate the material properties of native and decellularised pSFTs at three different strain rates (1%.s−1, 10%.s−1 and 100%.s−1). In addition, dynamic mechanical analysis (DMA) was used to ascertain the relative contributions of the solid and fluid phase components of the tissues.Ultimate tensile strength was significantly reduced in decellularised compared with native untreated pSFTs but was unaffected by strain rate. In contrast, toe region moduli increased with increasing strain rate for native tissues, but this effect was not observed in decellularised pSFTs. Linear region moduli were unaffected by strain rate, but were significantly reduced in decellularised pSFT compared with native tissue.Following DMA, significant reductions in dynamic modulus, storage modulus and loss modulus were seen in decellularised compared with native pSFT. Interestingly, the damping ability of the tendons was unaffected by decellularisation, suggesting that solid and fluid phases of the tissue were affected equally. These results, alongside previous studies, suggest that decellularisation affects collagen crimp, tissue swelling and collagen fibre sliding. However, despite these findings, the biomechanical properties of decellularised pSFT remain sufficient to act as an off-the-shelf solution for ACL reconstruction.