Anomalous Diffraction Phasing Research Articles

A novel class of Candida glabrata cell wall proteins with β-helix fold mediates adhesion in clinical isolates.

Candida glabrata is an opportunistic pathogenic yeast frequently causing infections in humans. Though it lacks typical virulence factors such as hyphal development, C. glabrata contains a remarkably large and diverse set of putative wall adhesins that is crucial for its success as pathogen. Here, we present an analysis of putative adhesins from the homology clusters V and VI. First, sequence similarity network analysis revealed relationships between cluster V and VI adhesins and S. cerevisiae haze protective factors (Hpf). Crystal structures of A-regions from cluster VI adhesins Awp1 and Awp3b reveal a parallel right-handed β-helix domain that is linked to a C-terminal β-sandwich. Structure solution of the A-region of Awp3b via single wavelength anomalous diffraction phasing revealed the largest known lanthanide cluster with 21 Gd3+ ions. Awp1-A and Awp3b-A show structural similarity to pectate lyases but binding to neither carbohydrates nor Ca2+ was observed. Phenotypic analysis of awp1Δ, awp3Δ, and awp1,3Δ double mutants did also not confirm their role as adhesins. In contrast, deletion mutants of the cluster V adhesin Awp2 in the hyperadhesive clinical isolate PEU382 demonstrated its importance for adhesion to polystyrene or glass, biofilm formation, cell aggregation and other cell surface-related phenotypes. Together with cluster III and VII adhesins our study shows that C. glabrata CBS138 can rely on a set of 42 Awp1-related adhesins with β-helix/α-crystallin domain architecture for modifying the surface characteristics of its cell wall.

Advances in long-wavelength native phasing at X-ray free-electron lasers.

Long-wavelength pulses from the Swiss X-ray free-electron laser (XFEL) have been used for de novo protein structure determination by native single-wavelength anomalous diffraction (native-SAD) phasing of serial femtosecond crystallography (SFX) data. In this work, sensitive anomalous data-quality indicators and model proteins were used to quantify improvements in native-SAD at XFELs such as utilization of longer wavelengths, careful experimental geometry optimization, and better post-refinement and partiality correction. Compared with studies using shorter wavelengths at other XFELs and older software versions, up to one order of magnitude reduction in the required number of indexed images for native-SAD was achieved, hence lowering sample consumption and beam-time requirements significantly. Improved data quality and higher anomalous signal facilitate so-far underutilized de novo structure determination of challenging proteins at XFELs. Improvements presented in this work can be used in other types of SFX experiments that require accurate measurements of weak signals, for example time-resolved studies.

Crystal structure of the periplasmic sensor domain of histidine kinase VbrK suggests indirect sensing of β-lactam antibiotics

Bacterial two-component regulatory systems (TCS) play important roles in sensing environmental stimuli and responding to them by regulating gene expression. VbrK/VbrR, a TCS in Vibrio parahaemolyticus, confers resistance to β-lactam antibiotics through activating a β-lactamase gene. Its periplasmic sensor domain was previously suggested to detect β-lactam antibiotics by direct binding. Here, we report a crystal structure of the periplasmic sensing domain of VbrK (VbrKSD) using sulfur-based single-wavelength anomalous diffraction (S-SAD) phasing. Contrary to most bacterial sensor domains which form dimers, we show that VbrKSD is a monomer using size exclusion chromatography coupled with multi-angle light scattering. This observation is also supported by molecular dynamics simulations. To quantify the binding affinity of β-lactam antibiotics to VbrKSD, we performed isothermal titration calorimetry and other biophysical analyses. Unexpectedly, VbrKSD did not show any significant binding to β-lactam antibiotics. Therefore, we propose that the detection of β-lactam antibiotics by VbrK is likely to be indirect via an as yet unidentified mechanism.

Crystal structure of bacteriophage T4 Spackle as determined by native SAD phasing.

The crystal structure of a bacteriophage T4 early gene product, Spackle, was determined by native sulfur single-wavelength anomalous diffraction (SAD) phasing using synchrotron radiation and was refined to 1.52 Å resolution. The structure shows that Spackle consists of a bundle of five α-helices, forming a relatively flat disc-like overall shape. Although Spackle forms a dimer in the crystal, size-exclusion chromatography with multi-angle light scattering shows that it is monomeric in solution. Mass spectrometry confirms that purified mature Spackle lacks the amino-terminal signal peptide and contains an intramolecular disulfide bond, consistent with its proposed role in the periplasm of T4 phage-infected Escherichia coli cells. The surface electrostatic potential of Spackle shows a strikingly bipolar charge distribution, suggesting a possible mode of membrane association and inhibition of the tail lysozyme activity in T4 bacteriophage superinfection exclusion.

Bayesian machine learning improves single-wavelength anomalous diffraction phasing.

Single-wavelength X-ray anomalous diffraction (SAD) is a frequently employed technique to solve the phase problem in X-ray crystallography. The precision and accuracy of recovered anomalous differences are crucial for determining the correct phases. Continuous rotation (CR) and inverse-beam geometry (IBG) anomalous data collection methods have been performed on tetragonal lysozyme and monoclinic survivin crystals and analysis carried out of how correlated the pairs of Friedel's reflections are after scaling. A multivariate Bayesian model for estimating anomalous differences was tested, which takes into account the correlation between pairs of intensity observations and incorporates the a priori knowledge about the positivity of intensity. The CR and IBG data collection methods resulted in positive correlation between I(+) and I(-) observations, indicating that the anomalous difference dominates between these observations, rather than different levels of radiation damage. An alternative pairing method based on near simultaneously observed Bijvoet's pairs displayed lower correlation and it was unsuccessful for recovering useful anomalous differences when using the multivariate Bayesian model. In contrast, multivariate Bayesian treatment of Friedel's pairs improved the initial phasing of the two tested crystal systems and the two data collection methods.

Development of “Parameter space screening”-based single-wavelength anomalous diffraction phasing and structure determination pipeline

In this paper, we present a highly efficient structure determination pipeline software suite (X2DF) that is based on the “Parameter space screening” method, by combining the popular crystallographic structure determination programs and high-performance parallel computing. The phasing method employed in X2DF is based on the single-wavelength anomalous diffraction (SAD) theory. In the X2DF, the choice of crystallographic software, the input parameters to this software and the results display layout, are all parameters which users can select and screen automatically. Users may submit multiple structure determination jobs each time, and each job uses a slightly different set of input parameters or programs. Upon completion, the results of the calculation performed can be displayed, harvested, and analyzed by using the graphical user interface (GUI) of the system. We have applied the X2DF successfully to many cases including the cases that the structure solutions fail to be yielded by using manual approaches.

Enhancement of MAD/MIR phasing at low resolution and a new procedure for automatic phase extension**Project supported by the National Basic Research Program of China (Grant No. 2011CB911100) of the Ministry of Science and Technology of China.

To achieve de novo protein structure determination of challenging cases, multi-wavelength anomalous diffraction (MAD) and multiple isomorphous replacement (MIR) phasing can be powerful tools to obtain low-resolution initial phases from heavy-atom derivative datasets, then phase extension is needed against high-resolution data to obtain accurate structures. In this context, we propose a direct-methods procedure here that could improve the initial low-resolution MAD/MIR phase quality. And accordingly, an automated process for extending initial phases to high resolution is also described. These two procedures are both implanted in the newly released IPCAS pipeline. Three cases are used to perform the test, including one set of 4.17 Å MAD data from a membrane protein and two sets of MAD/MIR data with derivatives truncated down to 6.80 Å and 6.90 Å, respectively. All the results have shown that the initial phases generated from the direct-methods procedure are better than that from the conventional MAD/MIR methods. The automated phase extensions for the latter two cases starting from 6.80 Å to 3.00 Å and 6.90 Å to 2.80 Å are proved to be successful, leading to complete models. This may provide convenient and reliable tools for phase improvement and phase extension in difficult low-resolution tasks.

Choosing your (Friedel) mates wisely: grouping data sets to improve anomalous signal.

Single-wavelength anomalous diffraction (SAD) phasing from multiple crystals can be especially challenging in samples with weak anomalous signals and/or strong non-isomorphism. Here, advantage is taken of the combinatorial diversity possible in such experiments to study the relationship between merging statistics and downstream metrics of phasing signals. It is furthermore shown that a genetic algorithm (GA) can be used to optimize the grouping of data sets to enhance weak anomalous signals based on these merging statistics.

Utilizing guanine-coordinated Zn2+ ions to determine DNA crystal structures by single-wavelength anomalous diffraction.

The experimental phase determination of crystal structures of nucleic acids and nucleic acid-ligand complexes would benefit from a facile method. Even for double-stranded DNA, software-generated models are generally insufficiently accurate to serve as molecular replacement search models, necessitating experimental phasing. Here, it is demonstrated that Zn2+ ions coordinated to the N7 atom of guanine bases generate sufficient anomalous signal for single-wavelength anomalous diffraction (SAD) phasing of DNA crystal structures. Using zinc SAD, three crystal structures of double-stranded DNA oligomers, 5'-AGGGATCCCT-3', 5'-GGGATCCC-3' and 5'-GAGGCCTC-3', were determined. By determining the crystal structure of one of these oligomers, GAGGCCTC, in the presence of Mg2+ instead of Zn2+, it was demonstrated that Zn2+ is not structurally perturbing. These structures allowed the analysis of structural changes in the DNA on the binding of analogues of the natural product mithramycin to two of these oligomers, AGGGATCCCT and GAGGCCTC. Zinc SAD may become a routine approach for determining the crystal structures of nucleic acids and their complexes with small molecules.

Fast and accurate data collection for macromolecular crystallography using the JUNGFRAU detector

The accuracy of X-ray diffraction data is directly related to how the X-ray detector records photons. Here we describe the application of a direct-detection charge-integrating pixel-array detector (JUNGFRAU) in macromolecular crystallography (MX). JUNGFRAU features a uniform response on the subpixel level, linear behavior toward high photon rates, and low-noise performance across the whole dynamic range. We demonstrate that these features allow accurate MX data to be recorded at unprecedented speed. We also demonstrate improvements over previous-generation detectors in terms of data quality, using native single-wavelength anomalous diffraction (SAD) phasing, for thaumatin, lysozyme, and aminopeptidase N. Our results suggest that the JUNGFRAU detector will substantially improve the performance of synchrotron MX beamlines and equip them for future synchrotron light sources.

Identification, Characterization, and X-ray Crystallographic Analysis of a Novel Type of Lectin AJLec from the Sea Anemone Anthopleura japonica

A novel galactose-specific lectin, AJLec (18.5 kDa), was isolated from the sea anemone, Anthopleura japonica. AJLec was characterized using the hemagglutination assay, isothermal titration calorimetry (ITC), and glycoconjugate microarray analysis and we found that AJLec has a specificity for galactose monomers and β-linked terminal galactose residues in complex carbohydrates, but not for N-acetylgalactosamine (GalNAc), which is commonly recognized by galactose-binding lectins. The primary structure of AJLec did not show homology with known lectins, and a crystal structural analysis also revealed a unique homodimeric structure. The crystal structure of AJLec complexed with lactose was solved by measuring the sulfur single-wavelength anomalous diffraction (S-SAD) phasing with an in-house Cu Kα source method. This analysis revealed that the galactose residue in lactose was recognized via its O2, O3, and O4 hydroxyl groups and ring oxygen by calcium coordination and two hydrogen bonds with residues in the carbohydrate-binding site, which demonstrated strict specificity for the β-linked terminal galactose in this lectin.

Experimental phase determination with selenomethionine or mercury-derivatization in serial femtosecond crystallography.

Serial femtosecond crystallography (SFX) using X-ray free-electron lasers (XFELs) holds enormous potential for the structure determination of proteins for which it is difficult to produce large and high-quality crystals. SFX has been applied to various systems, but rarely to proteins that have previously unknown structures. Consequently, the majority of previously obtained SFX structures have been solved by the molecular replacement method. To facilitate protein structure determination by SFX, it is essential to establish phasing methods that work efficiently for SFX. Here, selenomethionine derivatization and mercury soaking have been investigated for SFX experiments using the high-energy XFEL at the SPring-8 Angstrom Compact Free-Electron Laser (SACLA), Hyogo, Japan. Three successful cases are reported of single-wavelength anomalous diffraction (SAD) phasing using X-rays of less than 1 Å wavelength with reasonable numbers of diffraction patterns (13 000, 60 000 and 11 000). It is demonstrated that the combination of high-energy X-rays from an XFEL and commonly used heavy-atom incorporation techniques will enable routine de novo structural determination of biomacromolecules.

Development of a dose-limiting data collection strategy for serial synchrotron rotation crystallography.

Serial crystallography, in which single-shot diffraction images are collected, has great potential for protein microcrystallography. Although serial femtosecond crystallography (SFX) has been successfully demonstrated, limited beam time prevents its routine use. Inspired by SFX, serial synchrotron crystallography (SSX) has been investigated at synchrotron macromolecular crystallography beamlines. Unlike SFX, the longer exposure time of milliseconds to seconds commonly used in SSX causes radiation damage. However, in SSX, crystals can be rotated during the exposure, which can achieve efficient coverage of the reciprocal space. In this study, mercury single-wavelength anomalous diffraction (Hg-SAD) phasing of the luciferin regenerating enzyme (LRE) was performed using serial synchrotron rotation crystallography. The advantages of rotation and influence of dose on the data collected were evaluated. The results showed that sample rotation was effective for accurate data collection, and the optimum helical rotation step depended on multiple factors such as multiplicity and partiality of reflections, exposure time per rotation angle and the contribution from background scattering. For the LRE microcrystals, 0.25° was the best rotation step for the achievable resolution limit, whereas a rotation step larger than or equal to 1° was favorable for Hg-SAD phasing. Although an accumulated dose beyond 1.1 MGy caused specific damage at the Hg site, increases in resolution and anomalous signal were observed up to 3.4 MGy because of a higher signal-to-noise ratio.

Structure of the cyanobactin oxidase ThcOx from Cyanothece sp. PCC 7425, the first structure to be solved at Diamond Light Source beamline I23 by means of S-SAD.

Determination of protein crystal structures requires that the phases are derived independently of the observed measurement of diffraction intensities. Many techniques have been developed to obtain phases, including heavy-atom substitution, molecular replacement and substitution during protein expression of the amino acid methionine with selenomethionine. Although the use of selenium-containing methionine has transformed the experimental determination of phases it is not always possible, either because the variant protein cannot be produced or does not crystallize. Phasing of structures by measuring the anomalous diffraction from S atoms could in theory be almost universal since almost all proteins contain methionine or cysteine. Indeed, many structures have been solved by the so-called native sulfur single-wavelength anomalous diffraction (S-SAD) phasing method. However, the anomalous effect is weak at the wavelengths where data are normally recorded (between 1 and 2 Å) and this limits the potential of this method to well diffracting crystals. Longer wavelengths increase the strength of the anomalous signal but at the cost of increasing air absorption and scatter, which degrade the precision of the anomalous measurement, consequently hindering phase determination. A new instrument, the long-wavelength beamline I23 at Diamond Light Source, was designed to work at significantly longer wavelengths compared with standard synchrotron beamlines in order to open up the native S-SAD method to projects of increasing complexity. Here, the first novel structure, that of the oxidase domain involved in the production of the natural product patellamide, solved on this beamline is reported using data collected to a resolution of 3.15 Å at a wavelength of 3.1 Å. The oxidase is an example of a protein that does not crystallize as the selenium variant and for which no suitable homology model for molecular replacement was available. Initial attempts collecting anomalous diffraction data for native sulfur phasing on a standard macromolecular crystallography beamline using a wavelength of 1.77 Å did not yield a structure. The new beamline thus has the potential to facilitate structure determination by native S-SAD phasing for what would previously have been regarded as very challenging cases with modestly diffracting crystals and low sulfur content.

Protein structure determination by single-wavelength anomalous diffraction phasing of X-ray free-electron laser data.

Serial femtosecond crystallography (SFX) at X-ray free-electron lasers (XFELs) offers unprecedented possibilities for macromolecular structure determination of systems that are prone to radiation damage. However, phasing XFEL data de novo is complicated by the inherent inaccuracy of SFX data, and only a few successful examples, mostly based on exceedingly strong anomalous or isomorphous difference signals, have been reported. Here, it is shown that SFX data from thaumatin microcrystals can be successfully phased using only the weak anomalous scattering from the endogenous S atoms. Moreover, a step-by-step investigation is presented of the particular problems of SAD phasing of SFX data, analysing data from a derivative with a strong anomalous signal as well as the weak signal from endogenous S atoms.

Structural basis for dimer formation of the CRISPR-associated protein Csm2 of Thermotoga maritima.

The clusters of regularly interspaced short palindromic repeats (CRISPR) and the Cas (CRISPR-associated) proteins form an adaptive immune system in bacteria and archaea that evolved as an RNA-guided interference mechanism to target and degrade foreign genetic elements. In the so-called type IIIA CRISPR-Cas systems, Cas proteins from the Csm family form a complex of RNPs that are involved in surveillance and targeting tasks. In the present study, we report the crystal structure of Thermotoga maritima Csm2. This protein is considered to assemble into the helically shaped Csm RNP complex in a site opposite to the CRISPR RNA binding backbone. Csm2 was solved via cadmium single wavelength anomalous diffraction phasing at 2.4 Å resolution. The structure reveals that Csm2 is composed of a large 42 amino-acid long α-helix flanked by three shorter α-helices. The structure also shows that the protein is capable of forming dimers mainly via an extensive contact surface conferred by its long α-helix. This interaction is further stabilized by the N-terminal helix, which is inserted into the C-terminal helical portion of the adjacent subunit. The dimerization of Csm2 was additionally confirmed by size exclusion chromatography of the pure recombinant protein followed by MS analysis of the eluted fractions. Because of its role in the assembly and functioning of the Csm CRISPR RNP complex, the crystal structure of Csm2 is of great importance for clarifying the mechanism of action of the subtype IIIA CRISPR-Cas system, as well as the similarities and diversities between the different CRISPR-Cas system. The structure of Thermotoga maritima Csm2 has been deposited in the Protein Data Bank under accession code 5AN6.

The Quick and the Dead: A Guide to Fast Phasing of Small Ribozyme and Riboswitch Crystal Structures.

Ribozymes and riboswitches are examples of non-protein-coding (nc)RNA molecules that achieve biological activity by adopting complex three-dimensional folds. Visualization of such molecules at near-atomic resolution can enhance our understanding of how chemical groups are organized spatially, thereby providing novel insight into function. This approach has its challenges, which mainly entail sample crystallization followed by the application of empirical, structure-determination methods that often include experimental "phasing" of X-ray diffraction data. A paucity of high-quality crystals or a low symmetry space group are factors that demand rapid assessment of phasing potential during an ongoing experiment in order to assure a successful outcome. Here we describe the process of evaluating the anomalous signal-to-noise as a prelude to single wavelength or multiwavelength anomalous diffraction (SAD or MAD) phasing. Test cases include an autolytic 62-mer RNA enzyme known as the hairpin ribozyme, and a 33-mer riboswitch that binds the modified guanine metabolite preQ1. The crystals were derivatized with iridium (III) hexammine and osmium (III) pentaammine triflate, respectively. Each data set was then subjected to the XPREP and SHELX programs to assess the anomalous signal-to-noise and to locate the heavy-atom substructure. Subsequent noise filtering was conducted in SHELXE or RESOLVE. The methods described are applicable to the rapid phasing of RNA X-ray diffraction data, and contrast the efficacy of in-house X-rays with those attainable from synchrotron-radiation sources in terms of the potential to plan for and execute an experimental structure determination.

Purification, crystallization, crystallographic analysis and phasing of the CRISPR-associated protein Csm2 from Thermotoga maritima.

The clusters of regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated proteins (Cas) system consists of an intriguing machinery of proteins that confer bacteria and archaea with immunity against phages and plasmids via an RNA-guided interference mechanism. Here, the cloning, recombinant expression in Escherichia coli BL21 (DE3), purification, crystallization and preliminary X-ray diffraction analysis of Csm2 from Thermotoga maritima are reported. Csm2 is thought to be a component of an important protein complex of the type IIIA CRISPR-Cas system, which is involved in the CRISPR-Cas RNA-guided interference pathway. The structure of Csm2 was solved via cadmium single-wavelength anomalous diffraction (Cd-SAD) phasing. Owing to its involvement in the CRISPR-Cas system, the crystal structure of this protein could be of importance in elucidating the mechanism of type IIIA CRISPR-Cas systems in bacteria and archaea.

Structural and Mechanistic Insights into the Latrophilin3-FLRT3 Complex that Mediates Glutamatergic Synapse Development

Latrophilins (LPHNs) are adhesion-like G-protein-coupled receptors implicated in attention-deficit/hyperactivitydisorder. Recently, LPHN3 was found to regulate excitatory synapse number through trans interactions with fibronectin leucine-rich repeat transmembrane 3 (FLRT3). By isothermal titration calorimetry, we determined that only the olfactomedin (OLF) domain of LPHN3 is necessary for FLRT3 association. By multi-crystal native single-wavelength anomalous diffraction phasing, we determined the crystal structure of the OLF domain. This structure is a five-bladed β propeller with a Ca(2+) ion bound in the central pore, which is capped by a mobile loop that allows the ion to exchange with the solvent. The crystal structure of the OLF/FLRT3 complex shows that LPHN3-OLF in the closed state binds with high affinity to the concave face of FLRT3-LRR with a combination of hydrophobic and charged residues. Our study provides structural and functional insights into the molecular mechanism underlying the contribution of LPHN3/FLRT3 to the development of glutamatergic synapses.

An Unexpected Duo: Rubredoxin Binds Nine TPR Motifs to Form LapB, an Essential Regulator of Lipopolysaccharide Synthesis

Lipopolysaccharide (LPS) synthesis and export are essential pathways for bacterial growth, proliferation, and virulence. The essential protein LapB from Escherichia coli has recently been identified as a regulator of LPS synthesis. We have determined the crystal structure of LapB (without the N-terminal transmembrane helix) at 2Å resolution using zinc single-wavelength anomalous diffraction phasing derived from a single bound zinc atom. This structure demonstrates the presence of nine tetratricopeptide repeats (TPR) motifs, including two TPR folds that were not predicted from sequence, and a rubredoxin-type metal binding domain. The rubredoxin domain is bound intimately to the TPR motifs, which has not been previously observed or predicted. Mutations in the rubredoxin/TPR interface inhibit invivo cell growth, and invitro studies indicate that these modifications cause local displacement of rubredoxin from its binding site without changing the secondary structure of LapB. LapB is the first reported structure to contain both a rubredoxin domain and TPR motifs.