Anionic Substituents Research Articles

Investigation of the substituent effect of indocyanine green derivatives for lymph imaging

Fluorescence lymph imaging with indocyanine green (ICG) is widely utilized as diagnostic tool for lymphatic diseases. While this technique offers numerous advantages, the kinetics of ICG at the injection site can pose challenges for a detailed diagnosis. In this study, we synthesized various ICG derivatives possessing cationic, anionic, or uncharged substituents and examined their photochemical properties, binding affinity to human serum albumin, as well as their correlation to pharmacokinetics in mice. The introduction of different substituents not only affected certain physiochemical properties, but also impacted the pharmacokinetics within the lymph nodes. Immunofluorescence imaging suggested that the extent of uptake of the ICG derivatives by phagocytic cells may affect the retention of the contrast ratios in the lymph nodes. These findings can provide new insights in the pharmacokinetics in lymphatic tissues, which could be useful for the development of novel fluorescent agents for lymph imaging.

A step closer to sustainable CO2 conversion: Limonene carbonate production driven by ionic liquids

This work aims to advance the biocarbonate concept by developing the first process to produce limonene carbonate based on ionic liquids (ILs). Conventional petroleum-derived cyclic carbonates are recognized products partially composed of CO2 with the main drawback of the high energy consumption that imposes epoxide production. In contrast, natural epoxidable compounds, such as terpenes, stand out in the literature as a more sustainable open research line to enable CO2 conversion processes with better sustainable indicators. Limonene, an abundant natural compound, is identified as a key terpene in the aforementioned discussion. Ammonium-based ILs are experimentally selected and optimized, after covering massive anion and cation substituent tuning, achieving high selectivity and competitive yields to limonene carbonate. The reaction-extraction platform concept, which recovers the catalyst by liquid-liquid extraction, is envisioned and developed using a rational experimental-computational approach. The work concludes with a novel process to effectively produce limonene carbonate by using an IL catalyst and water as an extracting solvent. Ultimately, taking advance of the process simulation, a CO2 emissions assessment was conducted. Using renewable raw materials enhances the sustainability of CO2 conversion to cyclic carbonate, reducing global warming impact compared to fossil-based epoxides. However, limonene extraction and epoxidation have a tangible impact on the overall result of CO2 balance, turning efforts outside battery limits of the CO2 conversion process in the search of a limonene carbonate production line with negative neat CO2 emissions that may change the paradigm in the fixation of CO2 through cycloaddition reactions.

Hexafluoroisopropylboranes and -Borates

Novel hexafluoroisopropylboranes (CF3)(CF2H)CFBH2·L and -borate anions [(CF3)(CF2H)CFBH2X]− with Lewis basic heterocyclic ligands L and the anionic substituents X = F− and CN− were obtained. The syntheses were accomplished by substitution reactions of the dimethyl sulfide adduct (CF3)(CF2H)CFBH2·SMe2, which was synthesized on a large scale. The hexafluoroisopropylboranes and -borates were characterized by NMR and vibrational spectroscopy, elemental analysis, and single-crystal X-ray diffraction. In addition, the thermal and electrochemical stabilities were investigated by DSC measurements and cyclic voltammetry and selected experimental data and trends are compared with theoretical ones.

Superanionic DNA: enzymatic synthesis of hypermodified DNA bearing four different anionic substituents at all four nucleobases.

We designed and synthesized a set of four 2'-deoxyribonucleoside 5'-O-triphosphates (dNTPs) derived from 5-substituted pyrimidines and 7-substituted 7-deazapurines bearing anionic substituents (carboxylate, sulfonate, phosphonate, and phosphate). The anion-linked dNTPs were used for enzymatic synthesis of modified and hypermodified DNA using KOD XL DNA polymerase containing one, two, three, or four modified nucleotides. The polymerase was able to synthesize even long sequences of>100 modified nucleotides in a row by primer extension (PEX). We also successfully combined two anionic and two hydrophobic dNTPs bearing phenyl and indole moieties. In PCR, the combinations of one or two modified dNTPs gave exponential amplification, while most of the combinations of three or four modified dNTPs gave only linear amplification in asymmetric PCR. The hypermodified ONs were successfully re-PCRed and sequenced by Sanger sequencing. Biophysical studies including hybridization, denaturation, CD spectroscopyand molecular modelling and dynamics suggest that the presence of anionic modifications in one strand decreases the stability of duplexes while still preserving the B-DNA conformation, whilst the DNA hypermodified in both strands adopts a different secondary structure.

Anion-Activated Bases and Nucleophiles Characterized by Photoelectron Spectroscopy.

Negative ion photoelectron spectra at 20 K along with ab initio [CCSD(T)] and M06-2X density functional theory calculations are reported for a series of six basic and nucleophilic pyridine derivatives with an anionic substituent [i.e., 3- and 4-PyrBX3-, where X = F, 4-t-BuC6H4, 4-MeOC6H4, and 3,5-(MeO)2C6H3]. Vertical detachment energies (VDEs) of these charge-activated reagents span from 4.50-5.85 eV and are well reproduced by M06-2X/aug-cc-pVTZ and CCSD(T)/maug-cc-pVTZ computations. Surprisingly, the VDEs are found to correlate with the SN2 reactivity of the PPh4+ salts of the substituted pyridine anions with 1-iodooctane in dichloromethane. This provides an experimental measure of the nucleophilicity of these charge-activated anions, which represent a new class of chemical reagent.

Experimental and Computational Study of a Confirmed Borylene-to-Diborene Dimerization.

While the dimerization of heavier group 13 carbene analogues to the corresponding alkene analogues is known and relatively well understood, the dimerization of dicoordinate borylenes (LRB:, L = neutral donor; R = anionic substituent) to the corresponding diborenes (LRB═BRL) has never been directly observed. In this study we present the first example of a formal borylene-to-diborene dimerization through abstraction of a labile phosphine ligand from the tricoordinate hydroborylene precursor (CAAC)(Me3P)BH (CAAC = cyclic alkyl(amino)carbene) by bulky Lewis-acidic dihaloboranes (BX2Y, X = Cl, Br, Y = aryl, boryl), generating the corresponding dihydrodiborene (CAAC)HB═BH(CAAC) and (Me3P)BX2Y as the byproduct. An in-depth experimental and computational mechanistic analysis shows that this seemingly simple process (2 LL'BH + 2 BX2Y → LHB═BHL + 2 L'BX2Y) is in fact based on a complex sequence of finely tuned processes, involving the one-electron oxidation of and PMe3 abstraction from the borylene precursor by BX2Y, multiple halide transfers between (di)boron intermediates and BX2Y/[BX3Y]-, and multiple one-electron redox processes between diboron intermediates and the borylene precursor, which make the reaction ultimately autocatalytic in [(CAAC)(Me3P)BH]•+. The findings suggest that [LBXR]• boryl radicals are more likely coupling partners than dicoordinate LRB: borylenes in the reductive coupling of base-stabilized LBX2R boranes to LRB═BRL diborenes.

Correlation between positive temperature coefficient of resistance, double Schottky barrier, and anionic substituents in BiFeO3

Various types of conduction (leakage current) mechanisms in metal oxides deteriorate the system's electrical response. The existence of impurity phases, the formation of oxygen vacancies, and high porosity are the main source of free charge carriers in the system. Acceptor states are created due to the formation of oxygen vacancies in the system. In BiFeO3, acceptor states are formed within the grains and at the grain boundaries. The formation of double Schottky barriers at the grain boundaries is interpreted to be associated with the formation of such acceptor states formed at the grain boundary. These acceptor states are the consequence of oxygen stoichiometry which is also responsible for the appearance of a positive temperature coefficient of resistance (PTCR). The effect of substituting isovalent and aliovalent dopants in BFO has been comprehensively analyzed in the present study. These substitutions are responsible for forming a double Schottky barrier at the grain boundary. Barrier potential and barrier width are calculated and plotted as a function of the substituent (di, tri, or tetravalent) to highlight the role of the substituent's valence in the formation of a double Schottky barrier at the grain boundary and the appearance of the PTCR effect in the resistivity profile. The present study reveals that the occupation of the acceptor states at the grain boundaries affects the inter-grain conductivity.

Carbonate environment changes with Na or K substitution in biomimetic apatites

Biological and biomimetic apatites allow incorporations of many cationic and anionic substituents, namely Na+, CO32−, and potentially K+, that influence apatite's physicochemical, thermodynamic, and structural properties. Carbonate substitution can modify these properties depending on the CO32− type, such as hydroxyl (A-type) or phosphate (B-type) sites, or labile ions within the non-apatitic surface layer. While Na+ co-substitutions can affect CO32− integration, it is unknown if and how K+, a larger cation, may affect CO32− substitution and related apatite properties. Therefore, the purpose of this study was to compare the effects of K+ and Na+ on the physicochemical incorporation of CO32− in biomimetic apatites. To do so, 2–6 wt% CO32− apatites were precipitated in either Na- or K-rich solutions under optimized synthesis and maturation conditions. Atomic absorption data showed more Na+ substitution into the apatite structure than K+. FTIR and XRD results indicated that Na-apatites primarily contained B-type CO32−, while K-apatites included more A-type CO32− at higher total wt% CO32−. A deep FTIR analysis of the CO32− vibration modes showed that a red-shift occurred for the ν2CO32− and ν3CO32− B-type of the Na-apatites, suggesting a longer CO bond length, while K-apatites had a slight blue-shift for only ν2CO32−. Apatitic and non-apatitic HPO42− retention was also higher for Na-apatites than K-apatites. Together, these observations suggest that modification of the local CO32− environments depends on the monovalent cation. Overall, our data reveals the distinct mechanisms for Na+/CO32− and K+/CO32− co-substitution, which may shed light on the carbonation of biological apatites and their structural features.

Cationic Symmetrically and Unsymmetrically Substituted Diboranes and Bis(diboranes) with Direct Boron‐Boron Bond: Synthesis by Substitution, Stability and Properties

AbstractStarting with diboranes with two electron‐rich bridging bicyclic guanidinate substituents, we report in this work the rational synthesis of new dicationic symmetrically‐ and unsymmetrically‐substituted diboranes in SN1‐type substitution reactions in which triflato or bromo substituents are replaced by neutral Lewis bases. The scope of such substitution reactions and their rate are analyzed with different pyridine derivatives of variable Lewis basicity. The first substitution step, leading to a monocationic diborane with one anionic substituent (triflate or bromide) and one neutral Lewis base, proceeds much faster than the second substitution step leading to a dicationic diborane with two neutral Lewis bases. The different time scales for the substitution steps could be used to conveniently synthesize in one‐pot reactions several dicationic, unsymmetrically‐substituted diboranes with two different neutral Lewis bases.

Reactive FLP-alkyne addition products: a route to anionic and zwitterionic phosphines.

Combination of a phosphinidene precursor, B(C6F5)3 and 4-ethynyltoluene afforded the FLP addition product, Et2N(C14H10)PC(Tol)CH (B(C6F5)3) 2. Compound 2 reacted with halides, pseudo-halides or Me3SiSPh to provide a facile route to the salts of anionic phosphines while reaction with PEt3 gave the zwitterion Et3PCHC(SiMe3)P(NEt2)C(Tol)CHB(C6F5)38. This latter species reacted with an alkyne to give a phosphine donor with both olefin-linked cationic and anionic substituents.

Structural design of anthraquinone bridges in direct electron transfer of fructose dehydrogenase

Multi-functional small molecules attached to an electrode surface can bind non-covalently to the redox enzyme fructose dehydrogenase (FDH) to ensure efficient electrochemical electron transfer (ET) and electrocatalysis of the enzyme in both mediated (MET) and direct (DET) ET modes. The present work investigates the potential of exploiting secondary, electrostatic and hydrophobic interactions between substituents on a small molecular bridge and the local FDH surfaces. Such interactions ensure alignment of the enzyme in an orientation favourable for both MET and DET. We have used a group of novel synthesized anthraquinones as the small molecule bridge, functionalised with electrostatically neutral, anionic, or cationic substituents. Particularly, we investigated the immobilisation of FDH on a nanoporous gold (NPG) electrode decorated with the novel synthesised anthraquinones using electrochemical methods. The best DET-capable fraction out of four anthraquinone derivatives tested is achieved for an anthraquinone functionalised with an anionic sulphonate group. Our study demonstrates, how the combination of chemical design and bioelectrochemistry can be brought to control alignment of enzymes in productive orientations on electrodes, a paradigm for thiol modified surfaces in biosensors and bioelectronics.

Deep Blue Phosphorescence from Platinum Complexes Featuring Cyclometalated N-Pyridyl Carbazole Ligands with Monocarborane Clusters (CB11H12-).

The utilization of deep blue phosphorescent materials in high-performance displays and solid-state lighting requires high quantum efficiencies and color purities. Here, we describe the preparation and luminescent properties of novel platinum triplet emitters featuring cyclometalated N-pyridyl-carbazole ligands functionalized with closo-monocarborane clusters [CB11H12]-. All reported complexes were fully characterized by using standard small molecule techniques (UV-vis, cyclic voltammetry, nuclear magnetic resonance (NMR), high-resolution mass spectrometry (HRMS)), and their solid-state structures were elucidated by X-ray diffraction. These platinum phosphors emit in the blue region of the visible wavelength spectrum in both the solid and solution states. Complex 4a exhibits the highest luminous efficiency at λem = 439 nm with a photoluminescent quantum yield (PLQY) of 60% by dispersing in a PMMA matrix. Electrochemical and computational studies of complexes 4a and 4b revealed that the blue phosphorescence originates mainly from intraligand 3π → π* (3ILCT) transitions with relatively small 3MLCT mixing. A deep-blue OLED containing 4a as the light-emitting dopant was successfully fabricated using a solution-processed method, and the device exhibited blue photoluminescence with CIE coordinates of (0.17, 0.15) and a maximum external quantum efficiency (EQEmax) value of 6.2%. This article represents the pioneering study of a deep blue PhOLED using a Pt complex bearing a closo-monocarborane anion substituent, providing a new avenue into the preparation of novel triplet emitters based on boron-rich cluster anions.

Synthesis and Fluorescence Studies of Diborene Coinage Metal Complexes.

Nine different coinage metal (Cu, Ag) π complexes of diborenes with various anionic diborene (aryl, heteroaryl) and metal substituents (Cl, Br, C6F5, C2SiMe3), stabilizing neutral donors (N-heterocyclic carbene = NHC, phosphine), configurations (cis/trans, acyclic/cyclic diborene), and charges (neutral, cationic) were synthesized and characterized by multinuclear NMR spectroscopy and X-ray crystallographic analyses. Their optical properties were investigated by UV-vis absorption and steady-state as well as time-resolved luminescence spectroscopy in solution and the solid state to gain insights into the excited-state behavior of this unusual class of photoactive compounds and to provide structure-property relationships. The structural and electronic modification of the (B═B)···M motif greatly influences not only the visible light absorption but also the photostability and quantum yields, which can reach high values of up to f = 0.42. The lifetimes are found in the nanosecond regime, providing estimated radiative rate constants over a wide range of kr = 1.3-14 × 107 s-1, indicative of fluorescence. Intersystem crossing (ISC) is sufficiently slow for prompt emission from the S1 state to be observed, while the spin-orbit coupling in the T1 state is too weak for phosphorescence to occur at room temperature. ISC can be accelerated, however, by modifying diborene ligand substitution and the coinage metal center, hinting at the potential for exploiting the properties of long-lived triplet excited states of metal diborene complexes in the future.

Enhanced Aromaticity and Open-Shell Diradical Character in the Dianions of 9-Fluorenylidene-Substituted Expanded Radialenes.

Radialenes and expanded radialenes are cross-conjugated macrocycles displaying poor aromatic character. In this work, three 9-fluorenylidene substituted expanded [n]radialenes (ER-n, n=3-5) with a diacetylene spacer were synthesized and their structures were confirmed by X-ray crystallographic analysis and NMR spectroscopy. They all can be easily reduced into relatively stable dianions. Detailed experimental measurements and theoretical calculations suggest that their dianions (ER-n2- , n=3-5) are stabilized by both the aromatic fluorenyl anion substituents and the central aromatic rings with formally [4n+2] delocalized π electrons. In addition, the dianions of the extended radialenes (ER-42 - and ER-52 - ) show unique open-shell diradical character with a small singlet-triplet energy gap. For comparison, their linear counterparts (L-3 and L-4) were also synthesized; their dianions exhibit very different redox and optical properties from their respective macrocycles.

Enhanced Aromaticity and Open‐Shell Diradical Character in the Dianions of 9‐Fluorenylidene‐Substituted Expanded Radialenes

Radialenes and expanded radialenes are cross-conjugated macrocycles displaying poor aromatic character. In this work, three 9-fluorenylidene substituted expanded [n]radialenes (ER-n, n=3–5) with a diacetylene spacer were synthesized and their structures were confirmed by X-ray crystallographic analysis and NMR spectroscopy. They all can be easily reduced into relatively stable dianions. Detailed experimental measurements and theoretical calculations suggest that their dianions (ER-n2−, n=3–5) are stabilized by both the aromatic fluorenyl anion substituents and the central aromatic rings with formally [4n+2] delocalized π electrons. In addition, the dianions of the extended radialenes (ER-42− and ER-52−) show unique open-shell diradical character with a small singlet-triplet energy gap. For comparison, their linear counterparts (L-3 and L-4) were also synthesized; their dianions exhibit very different redox and optical properties from their respective macrocycles.

Protein-Calixarene Complexation: From Recognition to Assembly.

ConspectusThis Account summarizes the progress in protein–calixarene complexation, tracing the developments from binary recognition to the glue activity of calixarenes and beyond to macrocycle-mediated frameworks. During the past 10 years, we have been tackling the question of protein–calixarene complexation in several ways, mainly by cocrystallization and X-ray structure determination as well as by solution state methods, NMR spectroscopy, isothermal titration calorimetry (ITC), and light scattering. Much of this work benefitted from collaboration, highlighted here. Our first breakthrough was the cocrystallization of cationic cytochrome c with sulfonato-calix[4]arene leading to a crystal structure defining three binding sites. Together with NMR studies, a dynamic complexation was deduced in which the calixarene explores the protein surface. Other cationic proteins were similarly amenable to cocrystallization with sulfonato-calix[4]arene, confirming calixarene–arginine/lysine encapsulation and consequent protein assembly. Calixarenes bearing anionic substituents such as sulfonate or phosphonate, but not carboxylate, have proven useful.Studies with larger calix[n]arenes (n = 6, 8) demonstrated the bigger better binder phenomenon with increased affinities and more interesting assemblies, including solution-state oligomerization and porous frameworks. While the calix[4]arene cavity accommodates a single cationic side chain, the larger macrocycles adopt different conformations, molding to the protein surface and accommodating several residues (hydrophobic, polar, and/or charged) in small cavities. In addition to accommodating protein features, the calixarene can bind exogenous components such as polyethylene glycol (PEG), metal ions, buffer, and additives. Ternary cocrystallization of cytochrome c, sulfonato-calix[8]arene, and spermine resulted in altered framework fabrication due to calixarene encapsulation of the tetraamine. Besides host–guest chemistry with exogenous components, the calixarene can also self-assemble, with numerous instances of macrocycle dimers.Calixarene complexation enables protein encapsulation, not merely side chain encapsulation. Cocrystal structures of sulfonato-calix[8]arene with cytochrome c or Ralstonia solanacearum lectin (RSL) provide evidence of encapsulation, with multiple calixarenes masking the same protein. NMR studies of cytochrome c and sulfonato-calix[8]arene are also consistent with multisite binding. In the case of RSL, a C3 symmetric trimer, up to six calixarenes bind the protein yielding a cubic framework mediated by calixarene dimers. Biomolecular calixarene complexation has evolved from molecular recognition to framework construction. This latter development contributes to the challenge in design and preparation of porous molecular materials. Cytochrome c and sulfonato-calix[8]arene form frameworks with >60% solvent in which the degree of porosity depends on the protein:calixarene ratio and the crystallization conditions. Recent developments with RSL led to three frameworks with varying porosity depending on the crystallization conditions, particularly the pH. NMR studies indicate a pH-triggered assembly in which two acidic residues appear to play key roles. The field of supramolecular protein chemistry is growing, and this Account aims to encourage new developments at the interface between biomolecular and synthetic/supramolecular chemistry.

Synthesis and characterisation of triphenylmethine dyes for colour conversion layer of the virtual and augmented reality display

Five triphenylmethine dyes were designed and synthesised for the blue colour conversion layer of virtual and augmented reality displays. To form subpixel patterns suitable for high-brightness microdisplay panels, the prepared dyes must exhibit high solubility, colour strength, durability, and colour purity. For this purpose, three major strategies were introduced: dimerisation of triphenylmethine, chlorination, and counterion exchange. The electrostatic and spectroscopic characteristics of the synthesised dyes were investigated and predicted using computational calculations. The counter anion-modified dyes exhibited superior optical properties and thermal- and photo-stabilities compared to their parent dyes. The modified dyes also showed enhanced solubility toward industrial solvents because of their highly twisted chemical structures and weakly coordinating counter anion substituents. The synthesised dyes were chlorinated to optimise blue colour tuning and prevent the agglomeration of dyes. DTPM-Cl-HFPSI was selected as the main colourant, and EV-HFPSI was selected as the colour-matching colourant to manufacture optimal deep blue colour resists. The optimised spin-coated films exhibited high transmittance in the blue region and excellent properties in terms of brightness and colour purity by absorption over a wide and appropriate visible region.

Thermal and structural properties of sodium, potassium and carbonate doped strontium hydroxyfluorapatite

Ion-doping in hydroxyapatite bioceramics has attracted a lot of interest particularly for biomedical applications in repairing and replacing failure parts of musculoskeletal systems. Thus the multiple doping aims to mimic and resemble the chemical composition of the bone mineral component. Herein strontium hydroxyapatites bioceramics containing sodium Na+ and potassium K+ as cationic substituent and carbonate CO32− and fluoride as anionic substituent were synthesized and characterized by several analysis techniques. Therefore the chemical assays indicated that obtained compounds were less stoichiometric comparably to bone tissues. The X-ray diffraction diagrams and the infrared spectra revealed that pure phases of hydroxyfluorapatite containg the cited ions were obtained. The triple insertion of sodium, potassium and carbonate into the apatite structure leaded to the B-type carbonate apatite. The FE-SEM micrographs of the powders were formed by agglomerates. Moreover, the particles' morphology strongly depends on the ions nature and amount. The D-GTA curves indicated that the heating of the powders from the room temperature to 1000 °C didn't affect the structural and thermal stability of the materials apart from a partial decomposition of the apatite inducing the formation of the β-tristrontium phosphate phase and enhancing the biomaterial character of the materials.

Charged groups on pyropheophorbide-based photosensitizers dictate uptake by tumor cells and photodynamic therapy efficacy.

This study investigated the impact of anionic and cationic substituents of the pyropheophorbide-based photosensitizers (PS) on uptake and retention by tumor epithelial cells and photodynamic therapy (PDT). A series of PSs were generated that bear carboxylic acid functionalities, alkyl amines with variable length of carbon units or as a quaternary ammonium salt introduced at position 172 of 3-(1'-hexyloxy)ethyl-3-devinylpyropheophorbide-a (HPPH). The nature of the functionalities in the macrocycle made a significant difference in overall lipophilicity (log D values at pH7.4), and in binding to and retention by human and murine tumor cells. Depending on the presence of functional groups, the PSs showed a change in cellular uptake from diffusion to endocytosis and in the preference for subcellular localization to mitochondria/ER or lysosomes. Two and more carboxylic groups drastically reduced uptake by all cell types. In contrast, PSs with amine and quaternary amine salt showed higher cellular binding, uptake and in vitro PDT efficacy than HPPH. The enhanced cellular uptake of the cationic PSs was accompanied by a loss of tumor cell specificity and contributed to severe systemic toxicity in tumor-bearing mice intravenously injected with the PS and subjected to investigate their therapeutic potential.

Fusing 10-vertex closo-carborane anions with N-heterocyclic carbenes.

Discovered by Knöth in 1964, the 10-vertex closo-carborane anion [HCB9H91-] is a classical bicapped square antiprism that contains an unusual pentacoordinate carbon center. Compared to its larger icosahedral cousin [HCB11H111-], few investigations have been made into its use as a weakly coordinating anion or as a ligand substituent. Here we show that it is possible to prepare both a dianionic N-heterocyclic carbene (NHC) Li+ adduct as well as a trianionic C-2, C-5 dilithio species featuring two 10-vertex carborane anion substituents. All compounds were characterized via multinuclear NMR spectroscopy, single crystal X-ray diffraction, and HRMS when possible.