Angular Distribution Of Light Research Articles

An accurate and realistic polarization model for night-sky brightness

Abstract Most measurements of the diffuse light of the night sky to date consider only the intensity of the light field, and current models can successfully reproduce these measurements. However, this approach is incomplete as it overlooks the polarization state of the light. Few measurements (and no successful models) of night-sky polarimetry appear in the literature. We present a new model of night-sky polarization that successfully reproduces observations in a heterogeneous environment and for a real distribution of finite-sized light sources over the intermediate region surrounding the observer. The model compares favourably with field measurements made in Slovakia in May 2021. The results described herein help advance understanding the angular distributions of artificial light at night from ground sources and the relative contributions of sources to the overall brightness of the night sky.

High power illumination system for uniform, isotropic and real time controlled irradiance in photoactivated processes research

In the study of photocatalytic and photoactivated processes and devices a tight control on the illumination conditions is mandatory. The practical challenges in the determination of the necessary photonic quantities pose serious difficulties in the characterization of catalytic performance and reactor designs and configurations, compromising an effective comparison between different experiments.To overcome these limitations, we have designed and constructed a new illumination system based in the concept of the integrating sphere (IS). The system provides uniform and isotropic illumination on the sample, either in batch or continuous flow modes, being these characteristics independent of the sample geometry. It allows direct, non-contact and real time determination of the photonic quantities as well as versatile control on the irradiance values and its spectral characteristics. It can be also scaled up to admit samples of different sizes without affecting its operational behaviour.The performance of the IS system has been determined in comparison with a second illumination system, mounted on an optical bench, that provides quasi-parallel beam (QPB) nearly uniform illumination in tightly controlled conditions. System performance is studied using three sample geometries: a standard quartz cuvette, a thin straight tube and a microreactor by means of potassium ferrioxalate actinometry. Results indicate that the illumination geometry and the angular distribution of the incoming light greatly affect the absorption at the sample. The sample light absorption efficiency can be obtained with statistical uncertainties of about 3% and in very good agreement with theoretical estimations.

FO-SPR Model for Full-Spectrum Signal Analysis of Back-reflecting FO-SPR Sensors to Monitor MOF Deposition.

In this study, we explore the full-spectrum capabilities of fiber-optic surface plasmon resonance (FO-SPR) for analyzing heterogeneous samples with increased comprehensiveness. Our approach involves refining a literature-derived FO-SPR model to more precisely reflect experimental data obtained using a back-reflecting sensor configuration. Key enhancements in our model include adjustments to the thickness and permittivity of the gold SPR-active layer on the FO-SPR sensor as well as improvements to the angular distribution of light within the system. We apply this optimized model to the investigation of the deposition process of a metal-organic framework (MOF), specifically ZIF-8, using FO-SPR. By closely examining the temporal variations in the FO-SPR signal during MOF layer formation, we simultaneously determine the evolving thickness and refractive index (RI) of the MOF layer, offering a dual-parameter analysis. Our results demonstrate that a full-spectrum analysis of the FO-SPR signal can extract critical information from samples exhibiting radial heterogeneity. This advancement significantly enhances the quantitative assessment of various phenomena that alter the refractive index in the sensor's domain, such as adsorption and binding processes. This work thus represents a significant step forward in the field of FO-SPR sensor technology, promising broad applications in areas requiring the precise detection and analysis of complex samples.

Light Extraction Efficiency Enhancement of White Organic Light-Emitting Diodes (OLEDs) by Micro/Nano-Patterning the Substrate Layer

We demonstrate the enhancement of light extraction efficiency of surface-emitting white Organic Light Emitting Diodes (OLEDs) by incorporating micro/nano-metric structures on the outer surface of the 3-layer substrate (SiO2-Si3N4-SiO2). To enhance light extraction efficiency of the OLEDs, various light scattering structures including plano-convex & plano-concave micro-lens array, flat-top & round-top nano-pillars array, and wavy structures were engraved on the outer surface of the substrate layer. For optimization, we varied the thickness of the internal layers of the OLEDs, and height, width, period, and radius of the micro/nano-scale structures. The performance of the micro/nano-structured OLEDs was simulated and analyzed using Lumerical FDTD and GPVDM simulators. We examined the far field light intensity, transmitted power, angular distribution of light, photon escape probability, photon density, internal & external quantum efficiency, and current-voltage curve of the designed OLEDs. We investigated the results in different locations, especially after the substrate layer: Far Field-1 (0 μm), and Far Field-2 (2.5 μm). Compared to conventional OLEDs, the micro/nano-structured OLEDs showed higher external quantum efficiency. The highest external quantum efficiency of 67.304% (Far Field-1) was detected in the round-top nano-pillars array engraved white OLED having structure period of 1.2 μm. We strongly believe that, the proposed micro/nano-structured white OLEDs are suitable for lighting applications.

On the validity of two-flux and four-flux models for light scattering in translucent layers: angular distribution of internally reflected light at the interfaces.

Optical characterization and appearance prediction of translucent materials are required in many fields of engineering such as computer graphics, dental restorations or 3D printing technologies. In the case of strongly scattering materials, flux transfer models like the Kubelka-Munk model (2-flux) or the Maheu's 4-flux model have been successfully used to this aim for decades. However, they lead to inaccurate prediction of the color variations of translucent objects of different thicknesses. Indeed, as they rely on the assumption of lambertian fluxes at any depth within the material, they fail to model the internal reflectance at the interfaces, penalizing the accuracy of the optical parameter extraction. The aim of this paper is to investigate the impact of translucency on light angular distribution and corresponding internal reflectances by the mean of the radiative transfer equation, which describes more rigorously the impact of scattering on light propagation. It turns out that the light angular distribution at the bordering interfaces is often far from being lambertian, and that the internal reflectance may vary significantly according to the layer's thickness, refractive index, scattering and absorption coefficients and scattering anisotropy. This work enables to better understand the impact of scattering within a translucent layer and also invites to revisit the well-known Saunderson correction used in 2- or 4-flux models.

Experimenting with light at the 6th European Physics Olympiad

Abstract A good experimental task for a high school physics competition requires an interesting and relatable topic, careful testing, and meeting constraints of time, budget and curriculum. This article presents the experimental task from the European Physics Olympiad in the year 2022. The students explored the properties of light sources, such as their colour temperature, angular light distribution, efficacy and heating. The task was stated without explicit instructions, inviting the students to devise their own approach to measurement and data processing. The original task was designed for the level slightly above the European high-school curriculum, so parts of it can be directly used as a lab exercise at a university level, or simplified and given more specific instructions for inclusion in high school level education.

Wide heart-shaped mini-LEDs without a second lens as a large area, ultra-high luminance, and flat light source.

In recent years, the demand for outdoor advertising and industrial display applications has been steadily increasing. Outdoor environments require higher brightness levels, thus requiring a reduction in the thermal resistance of the light source package. However, using secondary optical lenses to decrease the number of light sources is not a suitable solution because it may lead to the issue of lens detachment. Therefore, this paper proposes a packaging structure for wide heart-shaped angular light distribution mini-light emitting diodes (WHS mini-LEDs) with a primary optical design to enhance the light-emitting angle. The chips are directly bonded to an aluminum substrate using the metal eutectic process to minimize thermal resistance in the packaging. The experimental results indicated that the WHS mini-LED package had a total thermal resistance of 6.7 K/W. In a 55-inch backlight module (BLM), only 448 WHS mini-LEDs coupled with a quantum dot (QD) film and a brightness enhancement film (BEF) were required. Each lamp board was operated at 20.5 V and 5.5 A. The average luminance of the liquid crystal module (LCM) can reach 2234.2 cd/m2 with a uniformity of 90% and an NTSC value of 119.3%. This design offers a competitive advantage for outdoor advertising displays and industrial displays that require large areas, high brightness, and high color saturation.

A Monoblock Light-Scattering Milk Fat Percentage and Somatic Cell Count Sensor for Use in Milking Systems.

A monoblock light-scattering sensor, which is capable of measuring the fat content of milk and indicating the excess by which the somatic cell count (SCC) is over the permissible level, has been developed for installation in dairy systems. In order for the sensor to perform measurements when the milking machine is working in the "milk plug" mode, a flow-through unit is designed in the form of a pipe with a lateral cylindrical branch, in which milk accumulates so as to eliminate large bubbles and achieve continuity of the milk flow. The operation of the sensor is based on the registration of the angular intensity distribution of light scattered in the transparent cylindrical segment of the tube branch. A semiconductor laser with a wavelength of 650 nm is used as a light source for determining scattering in milk. The angular distribution of the scattered light intensity (scattering indicatrix) is recorded using an axial photodiode array. The fat content is determined by the average slope of the measured scattering indicatrix in the range of scattering angles 72-162°. The SCC level is estimated from the relative deviation of the forward scatter intensity normalized to the backscatter intensity with respect to uninfected milk. The sensor has been tested on a Yolochka-type milking machine.

Modal dependence of Rayleigh scattering coefficients based on the bidirectional OTDR technique

In this work, a simple method based on optical time-domain reflectometry has been implemented to compare the Rayleigh scattering coefficient of different modes of few-mode fibers. The principle of the method is first validated in the case of single-mode fibers and then applied to two weakly-coupled few-mode fibers presenting different refractive index profiles. The results are compared with those obtained by more sophisticated experiments based on the analysis of the angular distribution of light scattering.

Video-based Elevated Skin Temperature Detection.

In this work, we propose a non-contact video-based approach that detects when an individual's skin temperature is elevated beyond the normal range. The detection of elevated skin temperature is critical as a diagnostic tool to infer the presence of an infection or an abnormal health condition. Detection of elevated skin temperature is typically achieved using contact thermometers or non-contact infrared-based sensors. The ubiquity of video data acquisition devices such as mobile phones and computers motivates the development of a binary classification approach, the Video-based TEMPerature (V-TEMP) to classify subjects with non-elevated/elevated skin temperature. We leverage the correlation between the skin temperature and the angular reflectance distribution of light, to empirically differentiate between skin at non-elevated temperature and skin at elevated temperature. We demonstrate the uniqueness of this correlation by 1) revealing the existence of a difference in the angular reflectance distribution of light from skin-like and non-skin like material and 2) exploring the consistency of the angular reflectance distribution of light in materials exhibiting optical properties similar to human skin. Finally, we demonstrate the robustness of V-TEMP by evaluating the efficacy of elevated skin temperature detection on subject videos recorded in 1) laboratory controlled environments and 2) outside-the-lab environments. V-TEMP is beneficial in two ways; (1) it is non-contact-based, reducing the possibility of infection due to contact and (2) it is scalable, given the ubiquity of video-recording devices.

Simulating the Influence of a Flow-Through Device for Milk Quality Analysis on The Flow Rate in the Milking Machine

The development of dairy farming proves to require technologies for rapid and non-destructive analysis of milk quality. It is noted that optical methods do not negatively affect dairy products. It is noted that farms may get the desired technology by upgrading milking machines with a flow-through device for milk quality express analysis. (Research purpose) To study the effect of upgrading the milking machine with a flow-through device for milk quality express analysis on the flow of the milk-air mixture in the milk hose. (Materials and methods) For this purpose the SolidWorks simulation modeling was used. Both the developed device and the simulation model are made in cylindrical geometry to ensure their compatibility with the milk hoses of 14 millimeters in diameter. The measurement took into account the angular distribution of light scattered by milk flowing inside an optically transparent cylindrical glass tube. The flow of the milk-air mixture was affected only by a change in the inner diameter of the milk tubes. (Results and discussion) It is noted that the simulation model demonstrates an increase in the flow rate of the milk-air mixture in the areas of flow transition between the milk hose and the fitting (to a smaller internal diameter), as well as between the fitting and the measuring chamber of the device (to a larger internal diameter). The mirror result is recorded at the flow outlet from the measuring chamber to the nozzle and the transition from the nozzle to the milk hose. (Conclusions) It is found that the use of the device results in a 14 percent increase in the average flow rate of 0.3-0.7 meters per second. It is determined that due to the incomplete filling of the milk hose during milking, the difference in the flow rates of the milk-air mixture before and when applying the device does not have any adverse impact on the milking machine operation. The feasibility of upgrading the milking machine with a flow-through device for milk quality express analysis is proved.

A Simple and Reliable Method to Determine Mean Incident Light Flux Densities on Cylindrical Photoreactors and Photobioreactors from a Unique Fluence Rate Measurement

A new method to determine the hemispherical incident light (photon) flux density onto cylindrical photoreactors or photobioreactors is presented. It applies to situations where the photo(bio)reactor is radially illuminated by surrounding artificial sources or solar light. It relies on the direct measurement of a fluence rate with a spherical sensor put at the center of the reactor. Theoretical relations leading to the calculation of the hemispherical incident light flux density from the fluence rate value are established, and a web application performing those calculations is made available. It relies on a view factor, the expression of which, established for the first time with any assumption of the angular distribution of light at the boundary, is given. This requires a proper definition of the degree of collimation for the incident radiation field. Two different and complementary experimental devices are used to validate the method. As a result, the proposed method appears to be simple and reliable; it even looks faster and more accurate than actinometry for this particular geometry.

Stereological approach to radiative transfer in porous materials. Application to the optics of snow

Porous materials are considered as a random binary mixture of two homogeneous phases with different refractive indices; the void may be an option for one of the phases. The stereological approach has been used to formulate a system of radiative transfer equations in which the refraction/reflection by the interface between the two phases is the source of scattering. For arbitrary statistics, it is the system of integral equations with the phase chord length distributions as their kernels. For Markov statistics, it becomes the system of standard-like radiative transfer equations. For a sparse mixture, i.e. when the mean chord of one phase is much larger than that of the other, the system reduces to a single equation which is the standard radiative transfer one. Dense packing affects apparent optical properties of the medium by reducing its albedo, increasing the transmittance and shifting a position of the maximum of the light angular distribution. The model has been applied to the optics of snow. The result is a higher accuracy in retrieving the specific surface area from snow reflectance measurements when compared with the conventional method using Mie calculations. The reasons of the albedo reduction with density and of the so far successful use of the Mie solution in the optics of snow are discussed. The theory presented applies to plenty of densely packed granular media: foams, various man-made powders (food, pharmaceutic, or metal), or natural covers of planetary surfaces, such as snow, soil, sand, or regolith.

Low-threshold green and red random lasing emission in inorganic halide lead perovskite microcrystals with plasmonic and interferential enhancement

Herein, low-threshold green and red random lasing actions were investigated in inorganic caesium lead bromide (CsPbBr3) and caesium lead iodide (CsPbI3) perovskite microcrystals, which were grown using metal organic chemical vapor deposition. Sharp random lasing emission peaks were visible on the right side of the broad photoluminescence emission spectra. Interferential patterned sapphire substrates and novel metal nanoparticles were used to enhance the lasing emission intensity and reduce the lasing emission thresholds. Fast-decayed random lasing oscillation dynamics and backscattering angular distribution of light confirmed that the multi-scattering of light was important in the reduction of the threshold in thin films on patterned sapphire substrates. Plasmonic enhancement between gold or silver nanoparticles and the perovskite microcrystals contributed similarly to low threshold random lasing emission, which was verified using the simulation result from the finite difference time domain (FDTD) method. This work has a wide range of applications in sensing, speckle-free imaging, illumination, and medical diagnosis.

Information content and aerosol property retrieval potential for different types of in situ polar nephelometer data

Abstract. Polar nephelometers are in situ instruments used to measure the angular distribution of light scattered by aerosol particles. These types of measurements contain substantial information about the properties of the aerosol being probed (e.g. concentrations, sizes, refractive indices, shape parameters), which can be retrieved through inversion algorithms. The aerosol property retrieval potential (i.e. information content) of a given set of measurements depends on the spectral, polarimetric, and angular characteristics of the polar nephelometer that was used to acquire the measurements. To explore this issue quantitatively, we applied Bayesian information content analysis and calculated the metric degrees of freedom for signal (DOFS) for a range of simulated polar nephelometer instrument configurations, aerosol models and test cases, and assumed levels of prior knowledge about the variances of specific aerosol properties. Assuming a low level of prior knowledge consistent with an unconstrained ambient/field measurement setting, we demonstrate that even very basic polar nephelometers (single wavelength, no polarization capability) will provide informative measurements with a very high retrieval potential for the size distribution and refractive index state parameters describing simple unimodal, spherical test aerosols. As expected, assuming a higher level of prior knowledge consistent with well-constrained laboratory applications leads to a reduction in potential for information gain via performing the polarimetric measurement. Nevertheless, we show that in this situation polar nephelometers can still provide informative measurements: e.g. it can be possible to retrieve the imaginary part of the refractive index with high accuracy if the laboratory setting makes it possible to keep the probed aerosol sample simple. The analysis based on a high level of prior knowledge also allows us to better assess the impact of different polar nephelometer instrument design features in a consistent manner for retrieved aerosol parameters. The results indicate that the addition of multi-wavelength and/or polarimetric measurement capabilities always leads to an increase in information content, although in some cases the increase is negligible, e.g. when adding a fourth, near-IR measurement wavelength for the retrieval of unimodal size distribution parameters or if the added polarization component has high measurement uncertainty. By considering a more complex bimodal, non-spherical-aerosol model, we demonstrate that performing more comprehensive spectral and/or polarimetric measurements leads to very large benefits in terms of the achieved information content. We also investigated the impact of angular truncation (i.e. the loss of measurement information at certain scattering angles) on information content. Truncation at extreme angles (i.e. in the near-forward or near-backward directions) results in substantial decreases in information content for coarse-aerosol test cases. However for fine-aerosol test cases, the sensitivity of DOFS to extreme-angle truncation is noticeably smaller and can be further reduced by performing more comprehensive measurements. Side angle truncation has very little effect on information content for both the fine and coarse test cases. Furthermore, we demonstrate that increasing the number of angular measurements generally increases the information content. However, above a certain number of angular measurements (∼20–40) the observed increases in DOFS plateau out. Finally, we demonstrate that the specific placement of angular measurements within a nephelometer can have a large impact on information content. As a proof of concept, we show that a reductive greedy algorithm based on the DOFS metric can be used to find optimal angular configurations for given target aerosols and applications.

Efficient Inverse Design of Large-Area Metasurfaces for Incoherent Light

Incoherent light is ubiquitous, yet designing optical devices that can handle its random nature is very challenging, since directly averaging over many incoherent incident beams can require a huge number of scattering calculations. We show how to instead solve this problem with a reciprocity technique which leads to three orders of magnitude speedup: one Maxwell solve (using any numerical technique) instead of thousands. This improvement enables us to perform efficient inverse design, large scale optimization of the metasurface for applications such as light collimators and concentrators. We show the impact of the angular distribution of incident light on the resulting performance, and show especially promising designs for the case of "annular" beams distributed only over nonzero angles.

Electroluminescence of monolayer WS2 in a scanning tunneling microscope: Effect of bias polarity on spectral and angular distribution of emitted light

Inelastic electron tunneling in a scanning tunneling microscope is used to generate excitons in monolayer tungsten disulfide (${\mathrm{WS}}_{2}$). Excitonic electroluminescence is measured both at positive and negative sample bias. Using optical spectroscopy and Fourier-space optical microscopy, we show that the bias polarity of the tunnel junction determines the spectral and angular distribution of the emitted light. At positive sample bias, only emission from excitonic species featuring an in-plane transition dipole moment is detected. Based on the spectral distribution of the emitted light, we infer that the dominant contribution is from charged excitons, i.e., trions. At negative sample bias, additional contributions from lower-energy excitonic species are evidenced in the emission spectra and the angular distribution of the emitted light reveals a mixed character of in-plane and out-of-plane transition dipole moments.

Nanostructuration of YAG:Ce Coatings by ZnO Nanowires: A Smart Way to Enhance Light Extraction Efficiency.

In this study, we report on the enhancement of the light extraction efficiency of sol–gel-derived Y3Al5O12:Ce3+ (YAG:Ce) coatings using ZnO nanowire (NW) arrays. The ZnO NWs were grown by hydrothermal synthesis from a ZnO seed layer directly deposited on a YAG:Ce coating. Highly dense and vertically aligned ZnO NW arrays were evidenced on the top of the YAG:Ce coating by electron microscopy. A photoluminescence study showed that this original design leads to a different angular distribution of light together with an increase in emission efficiency of the YAG:Ce coating upon blue excitation, up to 60% more efficient compared to a non-structured YAG:Ce coating (without NWs). These improvements are ascribed to multi-scattering events for photons within the structure, allowing them to escape from the phosphor layer by taking optical paths different from those of the non-structured coating. This strategy of light extraction enhancement appears to be very promising, since it uses soft chemical processes and cheap ZnO NWs and is applicable to any sol–gel-derived luminescent coating.

Multiple Angle Observations Would Benefit Visible Band Remote Sensing Using Night Lights

AbstractThe spatial and angular emission patterns of artificial and natural light emitted, scattered, and reflected from the Earth at night are far more complex than those for scattered and reflected solar radiation during daytime. In this commentary, we use examples to show that there is additional information contained in the angular distribution of emitted light. We argue that this information could be used to improve existing remote sensing retrievals based on night lights, and in some cases could make entirely new remote sensing analyses possible. This work will be challenging, so we hope this article will encourage researchers and funding agencies to pursue further study of how multi‐angle views can be analyzed or acquired.

Surface Electromagnetic Waves near a Black Hole Event Horizon and Their Observational Consequences

Localization phenomena in light, scattering from random fluctuations of matter fields and space–time metrics near a black hole horizon, were predicted to produce a pronounced peak in the angular distribution of second-harmonic light in the direction normal to the horizon. Therefore, the detection of second-harmonic generation may become a viable observational tool to study spacetime physics near event horizons of astronomical black holes. The light localization phenomena near the horizon may be facilitated by the existence of surface electromagnetic wave solutions. In this communication, we study such surface electromagnetic wave solutions near the horizon of a Schwarzschild metric, describing a black hole in vacuum. We demonstrate that such surface wave solutions must appear when quantum gravity effects are taken into account. Potential observational evidence of this effect is also discussed.