Incident Angle Research Articles

Soil moisture estimation using ground scatterometer and Sentinel-1 data

Soil moisture (SM) is a crucial criterion for agronomics and the management of water resources, particularly in areas where the socio-economic status and significant source of income depend upon agriculture and related sectors. This paper intends to estimate SM over the vegetative area using a generalized regression neural network (GRNN) and ground scatterometer and compare the results with SM retrieved using Sentinel-1 data. At the same time, random forest regression (RFR) and support vector regression (SVR) models are used for SM estimation. Correlation analysis results concluded that L-band HV-polarization at 300 incidence angle showed the highest correlation with the measured field parameters. This study investigated backscattering coefficients, VV/VH polarization ratio and polarization phase difference over wheat’s entire growth phase to estimate SM. The results indicate that the GRNN with backscattering coefficients and polarization ratio provided the highest accuracy compared to the random forest (RF) and SVR with the root mean square error of 0.093 over the Yavatmal District, Maharashtra, India.

Broadband spin and angle co-multiplexed waveguide-based metasurface for six-channel crosstalk-free holographic projection

Metasurface-based holograms, or metaholograms, offer unique advantages including enhanced imaging quality, expanded field of view, compact system size, and broad operational bandwidth. Multi-channel metaholograms, capable of switching between multiple projected images based on the properties of illuminating light such as state of polarization and angle of incidence, have emerged as a promising solution for realizing switchable and dynamic holographic displays. Yet, existing designs typically grapple with challenges such as limited multiplexing channels and unwanted crosstalk, which severely constrain their practical use. Here, we present a new type of waveguide-based multi-channel metaholograms, which support six independent and fully crosstalk-free holographic display channels, simultaneously multiplexed by the spin and angle of guided incident light within the glass waveguide. We employ a k-space translation strategy that allows each of the six distinct target images to be selectively translated from evanescent-wave region to the center of propagation-wave region and projected into free space without crosstalk, when the metahologram is under illumination of a guided light with specific spin and azimuthal angle. In addition, by tailoring the encoded target images, we implement a three-channel polarization-independent metahologram and a two-channel full-color (RGB) metahologram. Moreover, the number of multiplexing channels can be further increased by expanding the k-space’s central-period region or combing the k-space translation strategy with other multiplexing techniques such as orbital angular momentum multiplexing. Our work provides a novel approach towards realization of high-performance and compact holographic optical elements with substantial information capacity, opening avenues for applications in AR/VR displays, image encryption, and information storage.

Multi-functional and actively tunable terahertz metamaterial absorber based on graphene and vanadium dioxide composite structure

In this paper, a fabrication friendly terahertz (THz) metamaterial hybrid absorber comprised of square-shaped graphene and U-shaped vanadium dioxide is proposed and numerically analyzed. This device can be tuned dynamically to function as a wide-broadband, reduced-broadband, multi-band, or perfect single-band absorber. Switchable qualities are achieved through simultaneous tuning of the electrical properties of graphene and the phase transition properties of vanadium dioxide. The theory behind the absorption is explored using the distribution of the electric field and the theory of impedance matching. It is clear from the simulation results that the suggested structure can perform as a wide-broadband absorber for the transverse electric (TE) wave during the insulating phase of vanadium dioxide. In this case, graphene’s Fermi energy is configured to 0.7 eV, and it has a 0.1 ps relaxation time. Moreover, only changing the relaxation time to 0.5 ps enables the identical structure to perform as a multi-band absorber. On the contrary, the designed structure exhibits a reduced broadband absorption for the TE wave when the vanadium dioxide is thermally tuned to a metallic state and graphene’s Fermi energy is configured to 0 eV with a 0.1 ps relaxation time. Moreover, by inducing the metallic state in vanadium dioxide and adjusting the Fermi energy of graphene to 0.3 eV with a 0.1 ps relaxation time, the structure performs as a single-band perfect absorber. The main advantage of this work is that the proposed absorber device can be operated as a single-band, multi-band, or broadband absorber with two different bandwidths by applying external voltage and changing temperature. Additionally, for both the TE and transverse magnetic (TM) waves, the structure retains a high level of absorption until 40° of incident angle. Finally, due to its multi-functional property, simple geometric structure, and actively adjustable function, the presented structure has possible real-life applications in the terahertz frequency range.

Effects ofAs8structure formation on the surface morphology and internal microstructure of GaAs thin films.

Gallium arsenide (GaAs) materials have the advantages of high electron mobility, electron saturation drift rate, and other irreplaceable semiconducting properties. They play an important role in the electronics, solar and other fields. However, during GaAs film sedimentary growth, As atoms can undergo segregation to formAs8clusters because of the influence of external factors, which affect the surface morphology and internal structure of these films. In this study, a series of investigations on the deposition and growth of GaAs crystal films were performed. Additionally, the deposition and growth of GaAs thin films were simulated using molecular dynamics. The influence of As8clusters on the surface morphology and internal structure of GaAs films at different incidence angles, velocities and substrate temperatures was studied by using 'defect analysis technology' and 'diamond structure identification' in open source software, along with surface roughness and radial distribution function. Results show that with increasing incident angle, the number ofAs8clusters decreases and film density increases. Increasing incident velocity increases the irregular movement ofAs8clusters in air, and their deposition on the film surface affects the morphology of the film, and the surface roughness increases first and then decreases. Additionally, we investigated the effect of different substrate temperatures on the film surface. Results show that at a substrate temperature of 1173 K, the number ofAs8clusters in the film decreases or the As8clusters disappear, heterogeneous nucleation occurs in the film, and the crystallization rate increases. Although the dislocation line associated with nucleation may affect the mechanical and optical properties of the film, it considerably reduces the annealing effort after the deposition and growth.

Tunable intrinsic strong light–matter coupling in transition metal dichalcogenide nanoresonators

Self-hybridizing structures based on transition metal dichalcogenides (TMDCs) are becoming promising candidates for the study of an intrinsic strong light–matter coupling because of the efficient mode overlap with much simplified geometries. However, realizing flexible tuning of intrinsic strong coupling in such TMDC-based structures is still challenging. Here, we propose a strategy for flexible tuning of the intrinsic strong light–matter coupling based on a bulk TMDC material. We report the first demonstration of the strong coupling of intrinsic excitons to whispering gallery modes (WGMs) supported by an all-TMDC nanocavity. Importantly, by simply controlling angles of incidence, a selective excitation of WGMs and an anapole can be realized, which enables a direct modulation of self-hybridized interactions from a bright WGM–exciton coupling to a dark anapole–exciton coupling. Our work is expected to provide unique opportunities for engineering a strong light–matter coupling and to open exciting avenues for highly integrated novel nanophotonic devices.

Wetting behavior of stainless-steel surface with zinc oxide nanorod coatings: modulations in nanorod alignment through atomic layer deposition.

This study investigated the hydrophobic-hydrophilic characteristics of zinc oxide (ZnO) nanorod coatings for potential biomedical applications. We examined the effects of different alignments of ZnO nanorods on the wetting and mechanical characteristics of the coatings.
ZnO seed layers were prepared on stainless-steel plates using atomic layer deposition (ALD) at five different temperatures ranging from 50 to 250 ℃. The ZnO nanorod coatings were then deposited on these seed layers through chemical bath deposition. The polycrystalline structure of the seed layers and the morphology of the nanorods were analyzed using grazing incidence angle X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. Mechanical and wetting properties of the nanorod coatings were examined using nanoindentation and water-droplet tests. The seed layers produced at 50 and 250 ℃ showed stronger (0 0 2) peaks than the other layers. ZnO nanorods on these seed layers exhibited greater vertical orientation and lower water contact angles indicating a more hydrophilic surface. Additionally, vertically oriented nanorod coatings demonstrated greater elastic modulus and hardness than those of oblique nanorods. Our findings indicate that ALD technology can be used to control the spatial arrangement of ZnO nanorods and optimize the hydrophobic-hydrophilic and mechanical properties of coating surfaces.&#xD.

Observations on Macroscopic Surface Modification and Oxidation of Tungsten and Tungsten Carbide in Laser Focus in Air

Tungsten and tungsten carbide were damaged in ambient air with varying incident angles (0, 30, 45, and 60 deg) for approximately 5000 shots. The goal of these experiments was to observe the macroscopic surface modification in tungsten and tungsten carbide surfaces in harsh environments. At low pulse numbers (one to eight laser pulses on the same spot), tungsten aerial surface damage was less than tungsten carbide damage; however, at very high pulse numbers (5000), the opposite was true. Surface damage was mostly in the form of craters that were near circular at low impact angles and became more elongated at higher laser pulse impact angles. On the tungsten surface, a cluster of tungsten oxide debris formed. During laser exposure, laser-induced periodic surface structures and grooves were formed, and their geometries varied with laser intensity and laser impact angle. The period of laser-induced surface changes increased as the incident angle increased for both tungsten and tungsten carbide surfaces. More mass was lost in tungsten than tungsten carbide, which agrees with the morphological responses.

VO2 based multi-functional ultra-wideband terahertz meta-absorber for EMI shielding application

ABSTRACT This paper presents a multifunctional tuneable wideband metasurface absorber based on phase-changing Vanadium dioxide (VO2). The ‘quad isotropic VO2 circular sectors’ are constructed on amorphous silicon dioxide (SiO2), backed with 0.2 µm-thick gold layer to design the proposed absorber. This novel wideband tunable structure can independently be used as a reflector and absorber as an EMI shield; hence, this multi-functionality in a single structure proves novel and unique in the terahertz frequency range. This unit cell offers a bandwidth of 3.5 THz with more than 90% of absorptivity under normal wave incidence. The equivalent circuit model, surface currents, and field distributions are further investigated to provide a better understanding of structural evolution. Moreover, a wideband absorption has been observed up to the 60° incident angle for both the transverse modes, showing a polarization-insensitive behavior due to the symmetricity in the structure. The parametric study explores, optimizes, and demonstrates various other main characteristics and parameters of the proposed absorber. The novel structure offers shielding effectiveness (SE) higher than 40 dB throughout the frequency band under both normal and oblique incidence. This outstanding performance makes it a strong contender for EMI-EMC applications. Furthermore, it shows great potential in the field of terahertz technology, such as terahertz imagers, detectors, sensors, and other wideband applications.

Energy- and Angle-Resolved Scattering of Ne from Dodecane Liquid Surfaces: Theory Corroborating Experiment.

Motivated by recent experimental work by the Neumark group, we present here an all-atom molecular dynamics study of Ne scattering from a dodecane liquid surface with the objective of elucidating the fundamental aspects of gas-liquid dynamics. Using a fine-tuned force field, the GPU-accelerated simulations reproduced semiquantitatively the energy- and angle-resolved experimental results. The branching ratio between the impulsive scattering (IS) and thermal desorption (TD) channels exhibits a clear correlation with the incidence energy (Ei) and angle. Ne atoms with lower Ei values are more likely to be trapped, yielding an increased TD ratio. For a given Ei, a large incidence angle led to a higher IS ratio. The energy transfer between Ne atoms and liquid dodecane was found to be more sensitive to the deflection angle than to the incidence or reflection angle. With an increasing deflection angle, the fractional energy loss increases, suggesting that more kinetic energy is transferred to the liquid.

Design and analysis of K and Ku-band wide-angle polarization-insensitive dual-band perfect metamaterial absorber

This paper presents a polarization-insensitive dual-band metamaterial perfect absorber applied to the Ku and K bands. The proposed dual-band metamaterial absorber (MMA) is a three-layer structure of metal-dielectric-metal. The top metal layer consists of a split circle ring, two intersecting square rings, and a circle ring, the bottom metal layer is made of copper, and the middle dielectric layer is made of FR-4. The simulation results show that the MMA has two absorption peaks at frequencies of 12.06 GHz and 19.07 GHz, with absorption rates of 99.95% and 99.73%, respectively. The MMA exhibits good polarization insensitivity in TE and TM modes. In TE mode, the increase in incident angle significantly broadens the absorption bandwidth. The experimental results verified the dual-band perfect absorption of MMA and the incident angle gain characteristic of TE mode. The proposed dual-band MMA can be applied in related fields such as radar antennas, satellite communication, and sensing.

Tunable Near-Infrared Transparent Bands Based on Cascaded Fabry–Perot Cavities Containing Phase Change Materials

In this paper, we construct a near-infrared Fabry–Perot cavity composed of two sodium (Na) layers and an antimony trisulfide (Sb2S3) layer. By cascading two Fabry–Perot cavities, the transmittance peak splits into two transmittance peaks due to the coupling between two Fabry–Perot modes. We utilize a coupled oscillator model to describe the mode coupling and obtain a Rabi splitting of 60.0 meV. By cascading four Fabry–Perot cavities, the transmittance peak splits into four transmittance peaks, leading to a near-infrared transparent band. The near-infrared transparent band can be flexibly tuned by the crystalline fraction of the Sb2S3 layers. In addition, the effects of the layer thickness and incident angle on the near-infrared transparent band and the mode coupling are investigated. As the thickness of the Na layer increases, the coupling strength between the Fabry–Perot modes becomes weaker, leading to a narrower transparent band. As the thickness of the Sb2S3 layer increases, the round-trip propagating of the Sb2S3 layer increases, leading to the redshift of the transparent band. As the incident angle increases, the round-trip propagating of the Sb2S3 layer decreases, leading to the blueshift of the transparent band. This work not only provides a viable route to achieving tunable near-infrared transparent bands, but also possesses potential applications in high-performance display, filtering, and sensing.

Negative reflection and total internal reflection at the internal surface of lithium niobate crystal

In this paper we analytically find out the expression for the wave vector and Poynting vector in the reflection domain for negative uniaxial material. We investigate the impact of the optical axis rotation and incident angle on the wave vector and Poynting vector reflected from the internal surface of lithium niobate crystal when the light is propagating from the denser anisotropic medium to the rarer isotropic medium. We derive the Brewster angle condition and discuss the walk-off between TE and TM polarized light. We explore where the wave vector and Poynting vector are parallel after reflection. In further analysis, we look into the phase differences between ordinary and extraordinary reflected light after total internal reflection from the internal surface of lithium niobate crystal. The necessary conditions for linear polarization and circular polarization have been established. The impact of optical axis orientation is also taken into consideration. The refractive index for the isotropic material for the desired polarization response has been found as 2.18, 2.1, and 2.03 at 632 nm, 1550 nm, and 3500 nm, respectively.

Programmable metasurfaces with high angular stability for arbitrarily-polarized obliquely-incident waves

Abstract Programmable metasurfaces show enormous potential in real-time electromagnetic (EM) manipulation and their stable responses for variable EM waves including incident angle and polarization changes is crucial for related applications. However, the demonstrated programmable metasurfaces are commonly considered in normal-incident wave with fixed polarization; how to achieve stable performance in more realistic scenarios of wide-angle and full-polarized wave incidences is still a challenge. Here, we propose and realize a wide-angle and full-polarization programmable metasurface, which can generate stabilized amplitude and phase responses at both transverse electric (TE) and transverse magnetic (TM) oblique incidences. These are achieved by introducing the metallic walls around the metasurface element to reduce element coupling, which greatly improves the angular stability of its reflection responses. The mechanisms of angular insensitivity are analyzed comprehensively, and as a proof of concept, the obliquely-incident beam steering, large-angle beam scanning and oblique vortex beam emitting are demonstrated on this programmable metasurface. Both the simulation and experimental results demonstrate that the programmable metasurface can operate well at both TE and TM wide-angle oblique incidences in the upper half space. Our work offers an actual route for improving the angular stability and polarization insensitivity of metasurface, which could push it one step closer towards more complicated applications.

Two-dimensional grating metasurface for communication band under Littrow mounting

Abstract For communication, it is important to reduce the polarization-independence loss, especially for the stereoscopic incidence. A two-dimensional (2D) grating with the cylindrical hole (CDH) array is presented. The grating structure can achieve polarization-independent, high-efficiency and broadband output at the (-1, 0) diffraction order in the communication band. The novel metasurface achieves a diffraction efficiency of over 98% for both TE and TM polarizations at the (-1, 0) diffraction order. In addition, the (0, 0) diffraction order is well suppressed, resulting in extinction ratio of 43.89 dB and 46.18 dB for TE and TM polarization, respectively. In particular, the diffraction efficiency of the structure at the (-1, 0) order of magnitude under two polarizations exceeds 90% in the 1533-1561 nm bandwidth, which is a significant improvement over recently reported 2D gratings of the same type. Furthermore, the proposed structure has good incidence angle bandwidth and fabrication process tolerance, which ensures stable and efficient output in applications and fabrication. These results enrich the research on 2D gratings in the field of communication bands, and the designed grating has great potential for applications in spectroscopy, grating measurement and interferometry.

A Dual-Passband Frequency Selective Surface with High Angular Stability and Polarization Insensitivity

In this paper, a dual-passband frequency selective surface (FSS) with high angular stability and polarization insensitivity is proposed. The unit structure consists of a circular aperture, two annular apertures and four cross apertures. The designed FSS can achieve a double-passband at the interested frequencies of 8.45 GHz and 12.76 GHz with an insertion loss of less than 1 dB, and it can retain a stable transmission characteristic with the incident angle ranging from 0° to 86° for TE mode and from 0° to 83° for TM mode. Good agreement between the experimental results and the simulated response verifies the feasibility of the proposed FSS.

Maze-enclosed quad symmetric kite shaped SRR based metamaterial absorber for doppler navigation aids and earth exploration satellite remote sensing services

This paper represents a wide incident angle-polarization insensitive, stable in results, and compact-sized metamaterial absorber that can be used for Doppler navigation aids and remote sensing applications in Earth Exploration Satellite Services. The unit cell dimension was subwavelength-sized of 0.112λ X 0.112λ, with a good effective medium ratio (8.9), and achieved polarization insensitivity at a maximum incident angle up to 180°, making it more effective for proposed applications. The absorber resonated at 3.855 GHz, 5.13 GHz, 9.855 GHz, 13.335 GHz, and 16.02 GHz with single negative metamaterial properties due to negative permeability and absorptions of 99.7 %, 99.2 %, 98.6 %, 98.1 %, and 97.9 %, respectively. An RLC equivalent circuit on ADS was analyzed to validate the simulated results using the dipoles created by the surface currents. The absorber is cost-effective as no lumped elements or multilayer substrate materials were used, making fabricating less time-consuming and simple. The simulated results were validated by measuring data from a vector network analyzer after fabricating it. The proposed metamaterial absorber is suitable for use in Doppler navigation and Earth Exploration Satellite Services, and this research can further be extended to beamforming and sensing applications in the future.

Heavy ions and alpha particles irradiation impact on III-V broken-gap gate-all-around TFET

This report deals with the impact of radiation on III-V and Si gate-all-around tunnel field effect transistors (GAA TFET). The highly energetic particles (HEPs) such as heavy ions and alpha particles are allowed to strike the device at several locations along the channel to determine the sensitive location of the device. Once the sensitive location is determined, then the device is irradiated to different energies of heavy ions and alpha particles. Further, to get a proximate match as a practically exposed device, the device has been irradiated to several incident angles. Before analyzing the device's behaviour, the models used for the analysis are calibrated with the transfer characteristics of an experimentally published report on III-V GAA TFET. Thereafter, analysis of charge collection, transient current, hole generation in the channel, and different incident angles are analyzed. Finally, it is concluded that III-V GAA TFET shows better immunity towards different incident angles under a radiation environment when compared to Si GAA TFET.

A carbon nanotube metamaterial sensor showing slow light properties based on double plasmon-induced transparency.

In this study, we proposed a bifunctional sensor of high sensitivity and slow light based on carbon nanotubes (CNTs). An array of left semicircular ring (LSR), right semicircular ring (RSR), and circular ring (CR) resonators are utilized to form the proposed metamaterial. The proposed structure can achieve double plasmon-induced transparency (PIT) effects under the excitation of a TM-polarization wave. The double PIT originated from the destructive interference between two bright modes and a dark mode. A coupled harmonic oscillator model is used to describe the destructive interference between the two bright modes and a dark mode, and the simulation results agree well with the calculated results. Moreover, we investigate the influence of the coupling distance, period, and flare angle on the PIT spectra. The relationship between the resonant frequencies, full width at half maximum (FWHM), amplitudes, quality factors (Q), and the coupling distance is also studied. Finally, a high sensitivity of 1.02 THz RIU-1 is obtained, and the transmission performance can be maintained at a good level when the incident angle is less than 40°. Thus, the sensor can cope with situations where electromagnetic waves are not perpendicular to the structure's surface. The maximum figure of merit (FOM) can reach about 8.26 RIU-1; to verify the slow light property of the device, the slow light performance of the proposed structure is investigated, and a maximum time delay (TD) of 22.26 ps is obtained. The proposed CNT-based metamaterial can be used in electromagnetically induced transparency applications, such as sensors, optical memory devices, and flexible terahertz functional devices.

Considerations on measurement of bidirectional transmittance distribution function of thick samples over a wide range of viewing zenith angles

Abstract We delve into theoretical and experimental considerations for determining the spectral bidirectional transmittance distribution function (BTDF) of thick samples across a broad viewing zenith angle range. Nominally, BTDF is defined as the ratio of transmitted radiance to incident irradiance measured from the same plane. However, when employing thick samples for BTDF measurements, the viewing plane of the transmitted beam may shift from the front to the rear surface of the sample, altering the measurement geometry compared to using the sample front surface as the reference plane. Consequently, the viewing zenith angle from the sample rear surface increases relative to the sample front surface, and the sample-to-detector-aperture distance decreases by an amount corresponding to the sample thickness. We introduce a method for determining the BTDF of thick samples, considering the transformation of practical measurement results to a scenario where the measurements are conducted at a very large distance from the sample. To validate the method, we utilize a
BTDF facility equipped with two instruments that significantly differ in their sample-to-detector-aperture distances. We evaluate the impact of a 2 mm sample thickness on the BTDF by assessing the ratio of transmitted and incident radiant fluxes as a function of viewing zenith angle relative to the sample rear surface. The evaluation is conducted in the wavelength range from 550 nm to 1450 nm in 300 nm steps, and in the viewing zenith angle range from -70° to 70° in 5° steps. Measurements are performed in-plane at an incident zenith angle of 0°. It is concluded that consistent determination of BTDF of a thick sample is possible by converting the experimental parameters of the real measurements at relatively short distances from the sample to correspond to those that would be obtained from measurements at very large distances from the sample.

A Dual-Band Polarization-Insensitive Frequency Selective Surface for Electromagnetic Shielding Applications

This paper presents a novel polarization-insensitive dual-band frequency-selective surface (FSS)-based electromagnetic shield. The miniaturized FSS unit cell consists of a modified Jerusalem crossed loop and a corner-modified square loop. These FSS elements are arranged in a co-planner configuration over a single-layer Rogers 5880 substrate and simultaneously offer effective shielding in the X- and Ku-bands. Moreover, the FSS manifests polarization-independent and angularly stable band-reject filter characteristics over various oblique angles of incidence for both the TE and TM polarizations with virtuous attenuation at both resonances. In addition, the FSS structure is modelled into an equivalent lumped circuit to better analyze the phenomenon of EM wave suppression. A finite prototype of FSS is fabricated and tested. The simulated and measured results are in good agreement, thus making it a potential candidate for RF shielding/isolation applications.