Density Functional Theory Analysis Research Articles

Computational Insight into the Mechanism of Action of DNA Gyrase Inhibitors; Revealing a New Mechanism.

Discovery of novel antimicrobial agents is in need to deal with antibiotic resistance. Elucidating the mechanism of action for established drugs contributes to this endeavor. DNA gyrase is a therapeutic target used in the design and development of new antibacterial agents. Selective antibacterial gyrase inhibitors are available; however, resistance development against them is a big challenge. Hence, novel gyrase inhibitors with novel mechanisms are required. In this study, the mechanism of action for selected DNA gyrase inhibitors available was carried out through molecular docking and molecular dynamics (MD) simulation. In addition, pharmacophore analysis, density functional theory (DFT) calculations, and computational pharmacokinetics analysis of the gyrase inhibitors were performed. This study demonstrated that all the DNA gyrase inhibitors investigated, except compound 14, exhibit their activity by inhibiting gyrase B at a binding pocket. The interaction of the inhibitors at Lys103 was found to be essential for the binding. The molecular docking and MD simulation results revealed that compound 14 could act by inhibiting gyrase A. A pharmacophore model that consisted of the features that would help the inhibition effect was generated. The DFT analysis demonstrated 14 had relatively high chemical stability. Computational pharmacokinetics analysis revealed that most of the explored inhibitors were estimated to have good drug-like properties. Furthermore, most of the inhibitors were found to be non-mutagenic. In this study, mode of action elucidation through molecular docking and MD simulation, pharmacophore model generation, pharmacokinetic property prediction, and DFT study for selected DNA gyrase inhibitors were carried out. The outcomes of this study are anticipated to contribute to the design of novel gyrase inhibitors.

Dispersion-driven cooperativity in alkyl perylenediimide oligomers: insights from densityfunctional theory.

The cooperative mechanism is of paramount importance in the synthesis of supramolecular polymers with desired characteristics, including molecular mass, polydispersity, and morphology. It is primarily driven by the presence of intermolecular interactions, which encompass strong hydrogen bonding, metal-ligand interactions, and dipole-dipole interactions. In this study, we utilize density functional theory and energy decomposition analysis to investigate the cooperative behavior of perylene diimide (PDI) oligomers with alkyl chains at their imide positions, which lack the previously mentioned interactions. Our systematic examination reveals that dispersion interactions originating from the alkyl side-chain substituents play an important role in promoting cooperativity within these PDIs. This influence becomes even more pronounced for alkyl chain lengths beyond hexyl groups. The energy decomposition analysis reveals that the delicate balance between dispersion energy and Pauli repulsion energy is the key driver of cooperative behavior in PDIs. Additionally, we have developed a mathematical model capable of predicting the saturated binding energies for PDI oligomers of varying sizes and alkyl chain lengths. Overall, our findings emphasize the previously undervalued significance of dispersion forces in cooperative supramolecular polymerization, enhancing our overall understanding of the cooperative mechanism.

Bio-based composite from chitosan waste and clay for effective removal of Congo red dye from contaminated water: Experimental studies and theoretical insights

Water pollution due to dyes in the textile industry is a serious environmental problem. During the finishing stage, Congo red (CR) dye, water-soluble, is released into wastewater, polluting the water body. This study explores the effectiveness of utilizing a composite composed of Safi raw clay and chitosan to remove an anionic dye from synthetic wastewater. The chitosan was extracted from crab shells. Its removal performance was compared to that of natural clay. Both the composite and raw clay were used to remove target pollutant. The effects of the chitosan load in the composite, size particles, initial dye concentration, contact time, pH, and temperature on the dye's elimination were tested in batch modes. The composite with 30% (w/w) of chitosan exhibited the highest dye removal. At pH 2, an adsorption capacity of 84.74 mg/g was achieved, indicating that the grafting of the polymer onto clay surface enhances its efficacity and stability in acidic environments. This finding was supported by characterization data obtained from X-ray diffraction (XRD), scanning electron microscopy (SEM), dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR) analyses. Under optimized conditions of 20 mg dose, pH 2, 30 min of reaction time, and 20 mg/L of dye concentration, about 92% of dye removal was achieved. The Langmuir isotherm model represents dye adsorption by the composite, while dye removal was controlled by pseudo-second-order model. Thermodynamic data of the adsorption (ΔH = +8.82 kJ/mol; ΔG <0) suggested that the dye adsorption was spontaneous and endothermic. The findings provide insights into the dye elimination by the adsorbent, indicating that the removal occurred via attractive colombic forces, as confirmed by density functional theory (DFT) analysis. Overall, the composite of natural clays and chitosan waste is a promising and innovative adsorbent for treating wastewater containing recalcitrant dyes.

Exploring the inhibitory action of betulinic acid on key digestive enzymes linked to diabetes via in vitro and computational models: approaches to anti-diabetic mechanisms

ABSTRACT Phytochemicals are now increasingly exploited as remedial agents for the management of diabetes due to side effects attributable to commercial antidiabetic agents. This study investigated the structural and molecular mechanisms by which betulinic acid exhibits its antidiabetic effect via in vitro and computational techniques. In vitro antidiabetic potential was analysed via on α-amylase, α-glucosidase, pancreatic lipase and α-chymotrypsin inhibitory assays. Its structural and molecular inhibitory mechanisms were investigated using Density Functional Theory (DFT) analysis, molecular docking and molecular dynamics (MD) simulation. Betulinic acid significantly (p < 0.05) inhibited α-amylase, α-glucosidase, pancreatic lipase and α-chymotrypsin enzymes with IC50 of 70.02 μg/mL, 0.27 μg/mL, 1.70 μg/mL and 8.44 μg/mL, respectively. According to DFT studies, betulinic acid possesses similar reaction in gaseous phase and water due to close values observed for highest occupied molecular orbital (HOMO) and lowest occupied molecular orbital (LUMO) and the chemical descriptors. The dipole moment indicates that betulinic acid has high polarity. Molecular electrostatic potential surface revealed the electrophilic and nucleophilic attack-prone atoms of the molecule. Molecular dynamic studies revealed a stable complex between betulinic acid and α-amylase, α-glucosidase, pancreatic lipase and α-chymotrypsin. The study elucidated the potent antidiabetic properties of betulinic acid by revealing its conformational inhibitory mode of action on enzymes involved in the onset of diabetes.

DFT analysis of the electronic, optical, phonon, elastic, and mechanical features of ternary Rb2XS3 (X = Si, Ge, Sn) chalcogenides

Density functional theory (DFT) calculations were executed for the titled features of hitherto unreported Rb2XS3 (X = Si, Ge, Sn) chalcogen compounds. All compounds were found to be in semiconducting character where they demonstrate high-k dielectric properties, high optical conductivity, high refractivity and reasonable absorbance. In addition, obtained phonon dispersion curves of all compounds with positive phonon frequencies stipulate the dynamical stability. Also, computed elastic stiffness constants prove mechanical stability and bilateral agreement between Pugh ratio analyses with Poisson ratio results confirms the ductile mechanical feature of all addressed compounds. Overall, with satisfactory optical, elastic and mechanical aspects, Rb2XS3 (X = Si, Ge, Sn) chalcogenides can be promising materials for recent optoelectronics and microelectronics with diverse applications.

Exploring ferroelectric and photovoltaic attributes of Pna21-LaWN3: A first-principles approach

Traditional ferroelectric perovskite oxides are often limited by their wide band gaps, which restrict their efficient use of visible light. Pna21-LaWN3, an innovative perovskite nitride featuring a polar structure, has been investigated for its electronic structure, ferroelectric properties, and photovoltaic performance through Density Functional Theory (DFT) analysis. Our calculations reveal that Pna21-LaWN3 exhibits promising ferroelectric properties, primarily driven by the interaction between W and N atoms. Notably, Pna21-LaWN3 possesses a direct bandgap around 1.3 eV, coupled with a high absorption coefficient, making it highly efficient in absorbing visible light. SLME (Spectroscopic Limited Maximum Efficiency) analysis indicates that Pna21-LaWN3 can achieve significant short-circuit current, with a photoelectric conversion efficiency nearing 32 %, thus emerging as an outstanding candidate for ferroelectric photovoltaic applications. The study underscores the potential of Pna21-LaWN3 in overcoming the limitations of traditional ferroelectric materials and paves the way for its use in high-efficiency solar energy harvesting.

Interplay of altermagnetism and weak ferromagnetism in two-dimensional RuF4

Abstract Gaining growing attention in spintronics is a class of magnets displaying zero net magnetization and spin-split electronic bands called alter magnets. Here, by combining density functional theory and symmetry analysis, we show that RuF4 monolayer is a two-dimensional d-wave altermagnet. Spin-orbit coupling leads to pronounced spin splitting of the electronic bands at the Γ point by ∼100 meV and turns the RuF4 into a weak ferromagnet due to nontrivial spin-momentum locking that cants the Ru magnetic moments. The net magnetic moment scales linearly with the spin-orbit coupling strength. Using group theory we derive an effective spin Hamiltonian capturing the spin-splitting and spin-momentum locking of the electronic bands. Disentanglement of the altermagnetic and spin-orbit coupling induced spin splitting uncovers to which extent the altermagnetic properties are affected by the spin-orbit coupling. Our results move the spotlight to the nontrivial spin-momentum locking and weak ferromagnetism in the two-dimensional altermagnets relevant for novel venues in this emerging field of material science research.&amp;#xD;

2,4-dichloro-6-(1,4,5-triphenyl-1H-imidazol-2-yl) phenol: synthesis, DFT analysis, Molecular docking, molecular dynamics, ADMET properties against COVID-19 main protease (Mpro: 6WCF/6Y84/6LU7)

ABSTRACT New derivatives of 2,4-dichloro-6-(1,4,5-triphenyl-1H-imidazol-2-yl) phenol (DPIP) have been successfully synthesised and characterised using spectral methods such as FT-IR, 1H NMR and 13C NMR. Density functional theory (DFT) approach at B3LYP/6-311 G (d, p) level of theory is used to determine optimised bond parameters and single crystal XRD investigation of related derivatives confirms the structure of DPIP bond parameters. The single crystal XRD measurements and the optimised geometrical parameters produced by the DFT calculation agree well. The FT-IR bands seen in the experiment were attributed to distinct normal modes of the molecule. Frontier molecular orbital computations described the molecule stability, chemical reactivity and charge transfer. Atomic charges determined via Mulliken population analysis on the different DPIP atoms. MEP, which is mapped to the electron density surfaces, has discovered potential reactive sites of the molecule. The reported molecule is used as a potential NLO material since it has a high μβ0 value. Binding affinities were discovered using molecular docking against the COVID-19 major protease (Mpro: 6WCF/6Y84/6LU7). The behaviour of the complex structure formed by the Covid-19 protein under in silico physiological conditions was then confirmed by a 100 ns molecular dynamic simulation which looked at the structure stability over time and revealed a stable conformation and binding pattern in an environment of imidazole derivatives. Furthermore, favourable to moderate anti-viral activity was revealed by an in-silico analysis that anticipated the compound absorption, distribution, metabolism, excretion and toxicity profiles (ADMET).

The synchronized feature of Saururus chinensis and gut microbiota against T2DM, NAFLD, obesity and hypertension via integrated pharmacology

Type 2 diabetes mellitus (T2DM), nonalcoholic fatty liver disease (NAFLD), obesity (OB) and hypertension (HT) are categorized as metabolic disorders (MDs), which develop independently without distinct borders. Herein, we examined the gut microbiota (GM) and Saururus chinensis (SC) to confirm their therapeutic effects via integrated pharmacology. The overlapping targets from the four diseases were determined to be key protein coding genes. The protein–protein interaction (PPI) networks, and the SC, GM, signalling pathway, target and metabolite (SGSTM) networks were analysed via RPackage. Additionally, molecular docking tests (MDTs) and density functional theory (DFT) analysis were conducted to determine the affinity and stability of the conformer(s). TNF was the main target in the PPI analysis, and equol derived from Lactobacillus paracasei JS1 was the most effective agent for the formation of the TNF complex. The SC agonism (PPAR signalling pathway), and antagonism (neurotrophin signalling pathway) by SC were identified as agonistic bioactives (aromadendrane, stigmasta-5,22-dien-3-ol, 3,6,6-trimethyl-3,4,5,7,8,9-hexahydro-1H-2-benzoxepine, 4α-5α-epoxycholestane and kinic acid), and antagonistic bioactives (STK734327 and piclamilast), respectively, via MDT. Finally, STK734327-MAPK1 was the most favourable conformer according to DFT. Overall, the seven bioactives from SC and equol that can be produced by Lactobacillus paracasei JS1 can exert synergistic effects on these four diseases.

Mn-doped nickel-copper phosphides as oxygen evolution reaction electrocatalyst in alkaline seawater solution

Compared with traditional water electrolysis, electrolysis of seawater has larger resources and a brighter future. However, seawater contains more elements that have greater corrosive effects on electrodes; especially chloride ions (seawater contains more chloride ions) have the greatest impact. The existence of the corrosion problem creates greater difficulties in electrolyzing seawater, further limiting the efficiency of the electrocatalyst for electrolysis of seawater. In this paper, we report a Mn-doped Ni2P/Cu3P as an environmentally friendly monofunctional electrode for seawater electrolysis, which was made by a simple hydrothermal phosphatization operation method. The experimental results show that Mn-doped Ni2P/Cu3P presents overpotential of only 161 mV for oxygen evolution reaction (OER) at iR compensation of 90 and a current density of 10 mA cm−2. It has a small Tafel slope (25.15 mV dec−1) and a large capacitance (9.58 mF cm−2 on 1 × 1 nickel foam), which exceeds most reported oxygen evolution activities of non-precious metal-based electrocatalysts for electrolysis of alkaline seawater. The performance of Ni2P/Cu3P was probably significantly enhanced due to Mn doping by some characterization means. Through Density functional theory (DFT) analysis, it is known that the doping of Mn gives a large enhancement in the adsorption energy of water when Ni2P/Cu3P is electrolyzed with seawater. This paper provides train of thought for the exploration of excellent electrocatalysts for electrolysis of alkaline seawater.

In Situ Formation of Platinum-Carbon Catalysts in Propane Dehydrogenation.

The catalytic production of propylene via propane dehydrogenation (PDH) is a key reaction in the chemical industry. By combining operando transmission electron microscopy with density functional theory analysis, we show that the intercalation and ordering of carbon on Pt interstitials to form Pt-C solid solutions is relevant for increasing propylene production. More specifically, we found that at the point of enhanced propylene formation, the structure of platinum nanoparticles is transformed into a transient caesium chloride-type Pt-C polymorph. At more elevated temperatures, the zincblende and rock salt polymorphs seemingly coexist. When propylene production was highest, multiple crystal structures consisting of Pt and carbon were occasionally found to coexist in one individual nanoparticle, distorting the Pt lattice. Catalyst coking was detected at all stages of the reaction, but did initially not affect all particles. These findings could lead to the development of novel synthesis strategies towards tailoring highly efficient PDH catalysts.

In Situ Formation of Platinum‐Carbon Catalysts in Propane Dehydrogenation

AbstractThe catalytic production of propylene via propane dehydrogenation (PDH) is a key reaction in the chemical industry. By combining operando transmission electron microscopy with density functional theory analysis, we show that the intercalation and ordering of carbon on Pt interstitials to form Pt−C solid solutions is relevant for increasing propylene production. More specifically, we found that at the point of enhanced propylene formation, the structure of platinum nanoparticles is transformed into a transient caesium chloride‐type Pt−C polymorph. At more elevated temperatures, the zincblende and rock salt polymorphs seemingly coexist. When propylene production was highest, multiple crystal structures consisting of Pt and carbon were occasionally found to coexist in one individual nanoparticle, distorting the Pt lattice. Catalyst coking was detected at all stages of the reaction, but did initially not affect all particles. These findings could lead to the development of novel synthesis strategies towards tailoring highly efficient PDH catalysts.

Thiadiazole/Thiadiazine Derivatives as Insecticidal Agent: Design, Synthesis, and Biological Assessment of 1,3,4-(Thiadiazine/Thiadiazole)-Benzenesulfonamide Derivatives as IGRs Analogues against Spodoptera littoralis.

In keeping with our investigation, a simple and practical synthesis of novel heterocyclic compounds with a sulfamoyl moiety that can be employed as insecticidal agents was reported. The compound 2-hydrazinyl-N-(4-sulfamoylphenyl)-2-thioxoacetamide 1 was coupled smoothly with triethylorthoformate or a variety of halo compounds, namely phenacyl chloride, chloroacetyl chloride, chloroacetaldehyde, chloroacetone, 1,3-dichloropropane, 1,2-dichloroethane, ethyl chloroformate, 2,3-dichloro-1,4-naphthoquinone, and chloroanil respectively, which afforded the 1,3,4-thiadiazole and 1,3,4-thiadiazine derivatives. The new products structure was determined using elemental and spectral analysis. Under laboratory conditions, the biological and toxicological effects of the synthetic compounds were also evaluated as insecticides against Spodoptera littoralis (Boisd.). Compounds 3 and 5 had LC50 values of 6.42 and 6.90 mg/L, respectively. The investigated compounds (from 2 to 11) had been undergoing molecular docking investigation for prediction of the optimal arrangement and strength of binding between the ligand (herein, the investigated compounds (from 2 to 11)) and a receptor (herein, the 2CH5) molecule. The binding affinity within docking score (S, kcal/mol) ranged between -8.23 (for compound 5), -8.12 (for compound 3) and -8.03 (for compound 9) to -6.01 (for compound 8). These compounds were shown to have a variety of binding interactions within the 2CH5 active site, as evidenced by protein-ligand docking configurations. This study gives evidence that those compounds have 2CH5-inhibitory capabilities and hence may be used for 2CH5-targeting development. Furthermore, the three top-ranked compounds (5, 3, and 9) and the standard buprofezin were subjected to density functional theory (DFT) analysis. The highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy difference (ΔE) of compounds 5, 3, and 9 was found to be comparable to that of buprofezin. These findings highlighted the potential and relevance of charge transfer at the molecular level.

Solvent effects and Raman enhancement during the adsorption of atrazine on pristine Ag, Au, Cu and mixed clusters

Investigation of the adsorption properties of a herbicide, atrazine (6-chloro-4-N-ethyl-2-N-propan-2-yl-1,3,5-triazine-2,4-diamine) (CPD) with Ag, Au, Cu and their mixed clusters are presented using density functional theory (DFT) analysis. With metal clusters, it is found that CPD forms stable clusters, the drug-cluster complexation energy is maximum in CPD-Au2Cu (−38.69 and −45.79 kcal/mol) in vacuum and aqueous phase in comparison with other clusters. Dipole moment of the CPD-metal systems is higher than that of CPD. Clustering of CPD with metal cages enhances the Raman signals due to surface enhanced Raman scattering (SERS) activity. The exothermic processes and fluctuations in entropy during the processes were altered for all clusters as a result of CPD adsorption to the cages, indicating a change to a more ordered structure. Wavefunction based analysis indicated that there are significant non-covalent interactions (NCIs) between the system and the metal clusters.

Asymmetric 1,2‐Migration on Vicinal Tetrasubstituted Stereocenters Constructed from α‐Keto Imines

A carbonyl‐assisted asymmetric 1,2‐migratory allylation through in situ generation of vicinal tetrasubstituted stereocenters is reported to access enantiopure α‐amino ketones, and amino‐alcohols with excellent yields and diastereoselectivities. In a remarkable divergence, despite having higher steric hindrance, the allylation exclusively occurs on ketones over imines in the first step, followed by a face‐selective 1,2‐allyl transfer, thus highlighting an exciting interplay between two distinct electrophiles. The methodology distinguishes itself through its adaptability to gram‐scale synthesis, showcasing broad functional group tolerance, and stereodivergence. The density functional theory (DFT) analysis elucidates a deeper understanding of its selectivity and mechanistic framework. Highlighting its transformative potential, the total synthesis of hapalindole alkaloids were adeptly achieved.

Asymmetric 1,2‐Migration on Vicinal Tetrasubstituted Stereocenters Constructed from α‐Keto Imines

A carbonyl‐assisted asymmetric 1,2‐migratory allylation through in situ generation of vicinal tetrasubstituted stereocenters is reported to access enantiopure α‐amino ketones, and amino‐alcohols with excellent yields and diastereoselectivities. In a remarkable divergence, despite having higher steric hindrance, the allylation exclusively occurs on ketones over imines in the first step, followed by a face‐selective 1,2‐allyl transfer, thus highlighting an exciting interplay between two distinct electrophiles. The methodology distinguishes itself through its adaptability to gram‐scale synthesis, showcasing broad functional group tolerance, and stereodivergence. The density functional theory (DFT) analysis elucidates a deeper understanding of its selectivity and mechanistic framework. Highlighting its transformative potential, the total synthesis of hapalindole alkaloids were adeptly achieved.

Exploring electron donor and acceptor effects: DFT analysis of ESIPT/GSIPT in 2-(oxazolinyl)-phenols for photophysical and luminophore enhancement.

Understanding excited-state intramolecular proton transfer (ESIPT) is essential for designing organic molecules to enhance photophysical and luminophore properties in the development of optoelectronic devices. In this context, an attempt has been made to understand the impact of substituents on the ESIPT process of 2-(oxazolinyl)-phenol. Electron donating (EDG: -NH2, -OCH3, and -CH3) and electron withdrawing (EWG: -Cl, -Br, -COOH, -CF3, -CN, and -NO2) substitutions have been computationally designed and screened through density functional theory (DFT) and time-dependent density-functional theory (TDDFT) calculations. Furthermore, the ground state intramolecular proton transfer and ESIPT mechanisms of these designed luminophores are explored using the transition state theory. The results reveal that molecules with EDG show higher absorption and emission peaks than molecules with EWG and also indicate that the mobility of charge carriers in 2-(oxazolinyl)-phenol derivatives is significantly influenced by substituents. We found that the EWGs decrease the reorganization energy and increase the vertical ionization potential and electron affinity values, as well as the highest occupied molecular orbital-lowest unoccupied molecular orbital gap, compared to the EDG substituted molecules. Significantly, the excited state (S1) of the keto emission (K) form shows notably larger values for the EDG substitutions. The intersystem crossing pathway efficiency weakens with reduced spin-orbit coupling matrix element in the enol form with electron-donating substituents and vice versa in the keto form during S1-T3 transitions. Our research links intramolecular proton transfers and triplet generation, making these substituted molecules appealing for optoelectronic devices. Introducing EDGs, such as -NH2, boosts the ESIPT reaction in 2-(oxazolinyl)-phenol. This study guides designing ESIPT emitters with unique photophysical properties.

Biochar-Supported FeCo-MOF derivative catalyzes PDS-Mediated degradation of tetracycline

Bimetallic metal–organic framework (MOF) has gained wide attention in the field of advanced oxidative processes (AOPs), however, the agglomeration problem severely limits its active sites and its activation mechanism still needs to be further explored. This study developed the BC@CoFe composite material, utilizing biochar (BC) to support FeCo-MOF derivatives, effectively alleviating their agglomeration and structural collapse. The results of the BC@CoFe activated peroxydisulfate (PDS) system for the degradation of tetracycline (TC) revealed an excellent degradation efficiency up to 97.7 % in 2 h for TC solution (20 mg/L, degradation rate constants k = 7.066 mM-1min−1). Furthermore, the BC@CoFe/PDS system exhibits exceptionally high cyclic stability (73.23 % degradation efficiency after 12 h continuous degradation), a wide range of pH (3–11) and temperature tolerance (20-60℃), resistance to background ion interference (SO42-, H2PO4-, NO3– and HA), and reduced toxicity of the degradation products. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) analyses show that the exceptional catalytic performance of BC@CoFe primarily stems from the synergistic effect between Fe(II)/Co(III) and Fe(III)/Co(II). Regarding the reactive active species involved in TC degradation, the contribution rates of 1O2, SO4•- and ·OH were measured and calculated to be 73.6 %, 14.9 %, and 11.5 %, respectively. Thus, the BC@CoFe/PDS system exhibits outstanding catalytic activity and has broad practical applications in water treatment.

Unraveling selectivity in non-noble metal-catalyzed hydrogenation of 5-hydroxymethylfurfural (HMF) through mechanistic insights

The development of heterogeneous catalysts for converting abundant biomass feedstocks to higher value products is one of the most challenges these days. 2,5-dihydroxymethylfuran (DHMF) and 2,5-dihydroxymethyltetrahydrofuran (DHMTHF), synthesized from HMF hydrogenation, serve as crucial precursors in various applications. Non-noble metal catalysts are particularly attractive for this reaction, given their affordability and impressive catalytic efficiency. This work unveils the origin of the unique selectivity over Ni and Cu through mechanistic investigation using density functional theory (DFT), thermodynamic and kinetic analyses. The results emphasize that temperature and solvent play a crucial role in altering the energetic stabilities of intermediates, thereby influencing the energetic span (δG), turnover frequency (TOF), and selectivity of the reaction. The theoretical results align well with experimental observations. At 373.15 K, the highest TOF values over Ni and Cu are predicted in the HMF-to-DHMTHF path (1.79 × 103h−1) and the HMF-to-DHMF path (4.01 × 105h−1), respectively, in gas phase—under low dielectric constant ε condition. In contrast, the highest TOF value for Ni is observed in the HMF-to-DHMF path under implicit water condition (ε = 78.4) at 298.15 K. Competitive DHMF desorption and further hydrogenation influence the reaction’s selectivity. These insightful fundamental findings reveal key descriptors essential for designing new heterogeneous catalysts or enhancing existing ones, with the aim of potentially impacting biomass upgrading and other hydrogenation reactions.

Effect of Dual-Organic Cations on the Structure and Properties of 2D Hybrid Perovskites as Scintillators.

Two-dimensional (2D) hybrid organic-inorganic perovskite (HOIP) crystals show promise as scintillating materials for wide-energy radiation detection, outperforming their three-dimensional counterparts. In this study, we synthesized single crystals of (PEA2-xBZAx)PbBr4 (x ranging from 0.1 to 2), utilizing phenethylammonium (C6H5CH2CH2NH3+) and benzylammonium (C6H5CH2NH3+) cations. These materials exhibit favorable optical and scintillation properties, rendering them suitable for high light yield (LY) and fast-response scintillators. Our investigation, employing various techniques such as X-ray diffraction (XRD), photoluminescence (PL), time-resolved (TR) PL, Raman spectroscopy, radioluminescence (RL), thermoluminescence (TL), and scintillation measurements, unveiled lattice strain induced by dual-organic cations in powder X-ray diffraction. Density functional theory analysis demonstrated a maximal 0.13 eV increase in the band gap with the addition of BZA cation addition. Notably, the largest Stokes shift of 0.06 eV was observed in (BZA)2PbBr4. The dual-organic cation crystals displayed >80% fast component scintillation decay time, which is advantageous for the scintillating process. Furthermore, we observed a dual-organic cations-induced enhancement of electron-hole transfer efficiency by up to 60%, with a contribution of >70% to the fast component of scintillation decay. The crystal with the lowest BZA concentration, (PEA1.9BZA0.1)PbBr4, demonstrated the highest LYs of 14.9 ± 1.5 ph/keV at room temperature. Despite a 55-70% decrease in LY for BZA concentrations >5%, simultaneous reductions in scintillation decay time (12-32%) may work for time-of-flight positron emission tomography and photon-counting computed tomography. Our work underscores the crucial role of dual-organic cations in advancing our understanding of 2D-HOIP crystals for materials science and radiation detection applications.