Analysis Of Extracellular Polymeric Substances Research Articles

Performance of loach to reduce clogging matter in vertical-flow constructed wetlands: Hydraulic evaluation and metabolic processes

Extracellular polymeric substances (EPS) secreted by microorganisms cause constructed wetlands (CWs) clogging, which is a major challenge for the long-term stable operation of CWs. This study provided a comprehensive and in-depth study of the hydraulic evaluation and metabolic processes of loach (Misgurnus anguillicaudatus) in mitigating clogging. The results showed that the loach reduced the clogging content in the substrate layer and improved the hydraulic performance of the system. The loach system increased the initial porosity in the sand layer by 11.52 %, 25.11 %, and 28.15 %, and the initial porosity in the gravel layer by 15.49 %, 15.85 %, and 13.83 %, respectively. Loach also increased the actual and theoretical hydraulic retention time (HRT), improved the connectivity between different layers, and reduced the “dead zone” area of the system. The analysis of EPS components revealed that the daily EPS removal amount of each loach was 36.64 mg L-1, in which S-EPS, LB-EPS, and TB-EPS were 21.80, 8.02, and 6.82 mg L-1d-1, respectively. Direct feeding and the indirect coordination with microorganisms effectively reduced the contents of polysaccharides and proteins in EPS, and increased the proportion of humic acid and nucleic acid. The clogging characteristics analysis also confirmed that loach decreased tyrosine and tryptophan fluorophores groups and reduced the proportion of protein or peptide substances in the macromolecules in EPS. In addition, loach increased the activities of dehydrogenase, fluorescein diacetate, and the relative abundance of Chlorobiaceae in the sand layer, which was conducive to the hydrolysis of clogging matters with the metabolic activity of microorganisms. Loach increased the relative abundance of denitrifying microorganisms such as Aeromonadaceae, Rhodocyclaceae, and Hydrogenophilaceae in the gravel layer, which enhanced the denitrification process of the system and was conducive to pollutant transformation and clogging matter degradation. In conclusion, this study proposes a novel, eco-friendly strategy for preventing CW clogging in wetland animals.

Graphene oxide decorated copper nanoparticles embedded polysulfone nanocomposite membrane: Anti-bacterial, organo-bio fouling evaluation in pharmaceutical wastewater treatment via MBR

This study investigates the impact of incorporating graphene oxide (GO) nanosheets and copper nanoparticles decorated reduced graphene oxide (Cu/rGO) on the performance of polysulfone (PSf) membranes in a membrane bioreactor (MBR) system. The characterization of the synthesized nanomaterials confirmed superior antibacterial activity of Cu/rGO compared to GO. Compared to the neat PSf membrane, the prepared nanocomposite membranes exhibited enhanced antibacterial, hydrophilic properties, pure water flux and porosity. Furthermore, the morphological analysis suggested that the GO and Cu/rGO nanohybrids exhibited outstanding interface compatibility and less release (<7%) during 20 days of immersion. During the treatment of the pharmaceutical wastewater in bench scale MBR system, total fouling ratio (TFR) was decreased from 80.24 % for neat PSf membrane to 74.37 % and 67.85 % for PSf-GO and PSf-Cu/rGO membranes, respectively. Notably, the flux recovery ratio (FRR) of the optimized PSf-Cu/rGO and PSf-GO nanocomposite membranes significantly increased 1.44 and 1.25 folds compared to the neat PSf membrane, respectively. The analysis of extracellular polymeric substances indicated an outstanding reduction in protein and carbohydrate concentrations in the cake layer in the presence of nanohybrids, confirming the membranes’ ability to mitigate organic and bio-fouling. These findings suggest GO and Cu/rGO nanohybrids enhance PSf membranes performance in MBR applications.

Enhanced Sb(V) removal of sulfate-rich wastewater by anaerobic granular sludge assisted with Fe/C amendment

Antimony (Sb) and sulfate are two common pollutants in Sb mine drainage and Sb-containing textile wastewater. In this paper, it was found that iron‑carbon (Fe/C) enhanced Sb(V) removal from sulfate-rich wastewater by anaerobic granular sludge (AnGS). Sulfate inhibited Sb(V) removal (S + Sb, k = 0.101), while Fe/C alleviated the inhibition and increased Sb(V) removal rate by 2.3 times (Fe/C + S + Sb, k = 0.236). Fe/C could promote the removal of Sb(III), and Sb(III) content decreased significantly after 8 h. Meanwhile, Fe/C enhanced the removal of sulfate. The 3D-EEM spectrum of supernatant in Fe/C + S + Sb group (at 24 h) showed that Fe/C stimulated the production of soluble microbial products (SMP) in wastewater. SMP alleviated the inhibition of sulfate, promoting AnGS to reduce Sb(V). Sb(V) could be reduced to Sb(III) both by AnGS and sulfides produced from sulfate reduction. Further analysis of extracellular polymeric substances (EPS) and AnGS showed that Fe/C increased the adsorbed Sb(V) in EPS and the c-type cytochrome content in AnGS, which may be beneficial for Sb(V) removal. Sb(V) reduction in Fe/C + S + Sb group may be related to the genus Acinetobacter, while in Sb group, several bacteria may be involved in Sb(V) reduction, such as Acinetobacter, Pseudomonas and Corynebacterium. This study provided insights into Fe/C-enhanced Sb(V) removal from sulfate-rich wastewater.

Evaluating the role of carbon sources on the development of algal-bacterial granular sludge: From sludge characteristics, extracellular polymer properties, quorum sensing, and microbial communities

This study investigated the effect of dissolved organic matter (DOM) and particulate organic matter (POM) on the formation process of algal-bacterial granular sludge (ABGS). The results showed that compared with DOM, POM accelerated biomass growth and improved the settling performance of the sludge. However, concerning pollutant removal, ABGS cultured with DOM exhibited high TN and TP removal efficiency. The analysis of extracellular polymeric substances (EPS), indicated that the presence of POM primarily facilitated the production of loosely bound EPS (LB-EPS), whereas the presence of DOM promoted the secretion of tightly bound EPS (TB-EPS). Notably, carbon sources influenced the secretion of different signal molecules. ABGS cultured with POM exhibited higher concentrations of 3-oxo-C8-HSL than that cultivated with DOM, while DOM resulted in the production of more C8-HSL and C6-HSL. Microbial communities analysis revealed that the dominant bacteria in the mature ABGS cultured with different carbon sources were Plasticicumulans, while the predominant algal genus displayed notable diversity. Further investigations into functional genes suggested that the nitrification process (hao) and the denitrification process (nir, nar) were greatly enhanced in the presence of DOM. This study reveals the mechanism of carbon source types and ABGS formation, providing valuable guidance for the treatment of municipal wastewater with high POM proportion.

C4-HSL-mediated quorum sensing regulates nitrogen removal in activated sludge process at Low temperatures

The activated sludge process faces challenges in achieving adequate nitrification ability under low-temperature conditions. Therefore, we investigated the effects of different concentrations of exogenous N-butyryl-homoserine lactone (C4-HSL) on nitrogen removal in lab-scale sequencing batch reactors (SBRs) at 10 °C. The results revealed that both 10 and 100 μg/L of C4-HSL could improve NH4+-N removal efficiency by 26% and reduce the effluent TN concentration to below 15 mg/L. Analysis of extracellular polymeric substances (EPS) revealed that adding C4-HSL (especially 100 μg/L) reduced the protein-like substance content while increasing the humic and fulvic acid-like substance content in EPS. Protein-like substances could serve as carbon sources for denitrifiers, thus promoting denitrification. Moreover, exogenous C4-HSL increased the abundance of bacteria and genes associated with nitrification and denitrification. Further analysis of quorum sensing (QS) of microorganisms indicated that exogenous C4-HSL (especially 100 μg/L) promoted regulation, transportation, and decomposition functions in the QS process. Furthermore, CS, sdh, fum, and mdh gene expressions involved in the tricarboxylic acid (TCA) cycle were enhanced by 100 μg/L C4-HSL. Exogenous C4-HSL promoted microbial communication, microbial energy metabolism, and nitrogen metabolism, thereby improving the nitrogen removal efficiency of activated sludge systems at low temperatures. This study provides a feasible strategy for enhancing denitrogenation performance at low temperatures through exogenous C4-HSL.

Enhanced phosphorus release from waste activated sludge triggered by ferrate/sulfite oxidation process: The overlooked role of high valent iron

Waste activated sludge is considered a promising resource for phosphorus recovery. Therefore, it’s of great significance to release phosphorus from sludge. Potassium ferrate (PF) is deemed to be a green oxidant, which has great potential in the field of sludge treatment. In this study, sulfite (Na2SO3) coupled with the PF oxidation process was proposed to improve phosphorus release from sludge. The analysis of extracellular polymeric substances (EPS) of sludge indicated that sludge flocs were destroyed and nutrients were released, the total phosphorus and organic phosphorus increased significantly to 33.26 mg/L and 20.16 mg/L (40 min), respectively. Proteins, polysaccharides, and total organic carbon were transformed from tightly bound EPS to soluble EPS. In addition, the dissolved organic matter in tightly bound EPS decreased sharply, while the tyrosine-like protein and soluble microbial by-product substances in loosely bound EPS and soluble EPS increased significantly. Ethanol quenching experiments suggested that free radicals have little effects on phosphorus release, while the existence of high valent iron was validated by a chemical probe method applying methyl phenyl sulfoxide (PMSO) as the probe molecule. Thus, it was speculated that high valent iron may be the active substance for phosphorus release. The coupled PF/Na2SO3 process produced multiple active species (reactive oxygen species and high valent iron) to destruct sludge, among which high-valent iron species were mainly responsible for phosphorus release. This study provides new insights into the improvement of phosphorus release from sludge by the PF/Na2SO3 coupled oxidation process.

Fabrication of environmentally safe antifouling coatings using nano-MnO2/cellulose nanofiber composite with BED/GMA irradiated by electron beam

Marine biofouling, undesirable growth of organisms on submerged surfaces, poses significant challenges in various industries and marine applications. The development of environmentally safe antifouling coatings employing nano-MnO2/cellulose nanofiber (CNF) composite with bisphenol A epoxy diacrylate/glycidyl methacrylate (BED/GMA) irradiated by electron beam (T1) has been achieved in the current work. The physico-chemical characteristics of the fabricated coatings have been studied using Fourier transforms infrared spectroscopy, scanning electron microscope, water contact angle, and X-ray diffraction. The efficacy of T1 formulation and pure BED/GMA polymer (T2) in inhibiting biofouling formation was investigated in seawater of Alexandria Eastern Harbour by examining biofilm development morphologically and biochemically. In addition, regular analyses of seawater physicochemical parameters were conducted monthly throughout study. Results provide valuable information on coating performance as well as the complex interactions between coatings, biofilms, and environmental factors. The T1 formulation exhibited strong anti-fouling and anticorrosion properties over 2 months. However, after four months of immersion, all coated steel surfaces, including T1, T2, and T0, were heavily covered with macro-fouling, including tubeworms, barnacles, and algae. Biochemical analysis of extracellular polymeric substances (EPS) showed statistically significant variations in carbohydrates content between the coated surfaces. The T1 formulation showed decreased protein and carbohydrate content in EPS fractions after 14 days of immersion indicating less biofouling. Moreover, elemental analysis showed that carbon, oxygen, and iron were the predominant elements in the biofilm. Other elements such as sodium, silicon, chloride, and calcium were in lower concentrations. T2 and T0 surfaces revealed higher calcium levels and the appearance of sulphur peaks if compared with T1 surface. Diatoms and bacteria were detected on T1, T2, and T0 surfaces. The observed warming of seawater and nutrient-rich conditions were found to promote the growth of fouling organisms, emphasizing the importance of considering environmental factors in biofouling management strategies.

Insight into the effect of particulate organic matter on sludge granulation at the low organic load: Sludge characteristics, extracellular polymeric substances and microbial communities response

This paper investigated the effect of particulate organic matter (POM) on sludge granulation under low organic load. The results showed that POM promoted the formation of aerobic granular sludge (AGS) with a chemical oxygen demand (COD) fraction of 25%, and POM also enhanced the sludge settleability and biomass retention. However, when the COD fraction of POM increased to 50% and 75%, the AGS performance deteriorated. The analysis of extracellular polymeric substances revealed that the POM (accounted for ≤ 50% of COD in the influent) suppressed the secretion of extracellular protein. Analysis of the microbial community showed that species diversity was lower in the POM-fed system, with Rhodocyclaceae being the predominant bacteria responsible for carbon source degradation. Additionally, molecular ecological network analysis demonstrated that when the COD fraction of the POM exceeded 50%, the connectivity and modularity between microbial species decreased, which may explain the sludge performance deterioration.

Aerobic granular sludge formation and stability in enhanced biological phosphorus removal system under antibiotics pressure: Performance, granulation mechanism, and microbial successions

Wastewater containing antibiotics can pose a significant threat to biological wastewater treatment processes. This study investigated the establishment and stable operation of enhanced biological phosphorus removal (EBPR) by aerobic granular sludge (AGS) under mixed stress conditions induced by tetracycline (TC), sulfamethoxazole (SMX), ofloxacin (OFL), and roxithromycin (ROX). The results show that the AGS system was efficient in removing TP (98.0%), COD (96.1%), and NH4+-N (99.6%). The average removal efficiencies of the four antibiotics were 79.17% (TC), 70.86% (SMX), 25.73% (OFL), and 88.93% (ROX), respectively. The microorganisms in the AGS system secreted more polysaccharides, which contributed to the reactor's tolerance to antibiotics and facilitated granulation by enhancing the production of protein, particularly loosely bound protein. Illumina MiSeq sequencing revealed that putative phosphate accumulating organisms (PAOs)-related genera (Pseudomonas and Flavobacterium) were enormously beneficial to the mature AGS for TP removal. Based on the analysis of extracellular polymeric substances, extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, and microbial community, a three-stage granulation mechanism was proposed including adaption to the stress environment, formation of early aggregates and maturation of PAOs enriched microbial granules. Overall, the study demonstrated the stability of EBPR-AGS under mixed antibiotics pressure, providing insight into the granulation mechanism and the potential use of AGS for wastewater treatment containing antibiotics.

Conductive carrier promotes synchronous biofilm formation and granulation of anammox bacteria

The extracellular electron transfer capability of some anaerobic ammonium oxidation (anammox) bacteria was confirmed in recent years. However, the effect of conductive carriers on the synchronous formation of anammox biofilm and granules is rarely reported. Anammox biofilm and granules with compact and stable structures accelerate the initiation and enhance the stability of the anammox process. In this study, we found that the conductive carbon fiber brush (CB) carrier promoted synchronous biofilm formation and granulation of anammox bacteria in the internal circulation immobilized blanket (ICIB) reactor. Compared with polyurethane sponge and zeolite carrier, the ICIB reactor packed with CB carrier can be operated under the highest total nitrogen loading rate of 6.53 kg-N/(m3·d) and maintain the effluents NH4+-N and NO2−-N at less than 1 mM. The volatile suspended solids concentration in the ICIB reactor packed with conductive carrier increased from 5.17 ± 0.40 g/L of inoculum sludge to 24.24 ± 1.20 g/L of biofilm, and the average particle size of granules increased from 222.09 µm to 879.80 µm in 150 days. Fluorescence in situ hybridization analysis showed that anammox bacteria prevailed in the biofilm and granules. The analysis of extracellular polymeric substances indicated that protein and humic acid-like substances played an important role in the formation of anammox biofilm and granules. Microbiome analysis showed that the relative abundance of Candidatus Jettenia was increased from 0.18% to 38.15% in the biofilm from CB carrier during start-up stage. This study provides a strategy for rapid anammox biofilm and granules enrichment and carrier selection of anammox process.

Biofilm inhibition based on controlling the transmembrane transport and extracellular accumulation of quorum sensing signals

The regulation of bacterial quorum sensing (QS) has been used to inhibit biofouling in wastewater treatment plants and the formation of biofilms. In contrast to traditional QS regulation strategies, this study aimed to obstruct the transmembrane transport process of QS signals to decrease their extracellular accumulation. Three phytochemicals, astragaloside IV, eugenol, and baicalin were selected, their effects on biofilm formation by Pseudomonas aeruginosa PA14 were studied, and the mechanisms determined. The inhibition efficiency of biofilm formation by 50 mg/L astragaloside IV, 1 mg/L eugenol, and 1 mg/L baicalin were 37%, 26%, and 26%, respectively. Confocal laser scanning microscopy and analysis of extracellular polymeric substances indicated that the three inhibitors affected the structure and composition of the biofilms. Furthermore, bacterial motility and a variety of QS-related virulence factors were suppressed by the inhibitor treatment due to changes in bacterial QS. Notably, the three inhibitors all decreased the extracellular concentration of the QS signaling molecule 3-oxo-C12-homoseine lactone by affecting the function of efflux pump MexAB-OprM. This indirectly interfered with the bacterial QS system and thus inhibited biofilm formation. In conclusion, this study revealed the inhibitory effects and inhibition mechanism of three phytochemicals on efflux pump and QS of P. aeruginosa and realized the inhibition on biofilm formation. We update the efflux pump inhibitor library and provide a new way for biofilm contamination control.

Bioremediation of copper using indigenous fungi Aspergillus species isolated from an abandoned copper mine soil

Bioremediation of mining soils using metal tolerant fungi is widely considered as a promising cost-effective and ecofriendly approach. This study assessed the copper removal efficiency and bioaccumulation ability of the indigenous species Aspergillus hiratsukae LF1 and Aspergillus terreus LF2 isolated from the soils of an abandoned copper mine in Oman. Nutrient medium containing five different Cu (II) levels (0 – control, 100, 200, 300 and 500 mg/L) was employed for assessing both parameters. The removal efficiency from nutrient medium (100–500 mg Cu per L) ranged from 57% to 21% for A. hiratsukae LF1, and from 69% to 24% for A. terreus LF2. A. hiratsukae LF1 and A. terreus LF2 accumulated a maximum of 4.63 and 5.95 mg Cu/g,espectively, at 500 mg/L of Cu (II) concentration. The compositional analysis of extracellular polymeric substances excreted by both species revealed a hormetic response by A. hiratsukae LF1 at 100 mg/L; whereas increasing media Cu levels induced carbohydrates production in A. terreus LF2. These results hint at the involvement of carbohydrates in the Cu-tolerance mechanism of the latter. Copper accumulation in both species was further demonstrated through scanning electron microscopy and energy dispersive spectrometry. In line with the pertaining literature, our results are somewhat inconclusive concerning whether proteins or carbohydrates play a more pivotal role in copper complexation in both species; yet, FTIR analysis showed the participation of different functional groups in Cu sorption. Overall, although additional research is required to advance the knowledge about both Aspergillus species, our findings suggest that A. terreus LF2 presents greater promise for copper bioremediation due to enhanced tolerance and accumulation capacity.

Characterization of magnetite assisted anammox granules based on in-depth analysis of extracellular polymeric substance (EPS)

Magnetite can be considered as an iron-rich carrier particles that can be ionized into Fe2+ and Fe3+ which improves the activity and aggregation of anammox bacteria. Three samples from this carrier assisted granulation reactor with size groups including Flocs, FL (0–300 µm), Small Granules, SG (300–500 µm) and Large Granules, LG (500–1000 µm) were used in this study. It was observed that as the granule size increased, the iron-rich carrier content increased, and their active crystals improved the microbial cell density. Specific anammox activity (SAA) was 34.63 ± 5.02, 55.29 ± 5.14, and 63.81 ± 7.50 mg-N/g-VSS/d for FL, SG and LG, respectively. In addition, in heme c content of LG was 31.5 % higher than SG and 62.9 % higher than FL. An in-depth study into the extracellular polymeric substances (EPS) showed that the secretion intensity of essential proteins followed the order of FL < SG < LG in loosely bound EPS and FL > SG > LG in tightly bound EPS. Functional group analysis confirmed that the hydrophobic CN and NH stretching vibration band had almost 3.5 times higher transmittance intensity in LG than the other sizes and the corresponding ratio of α-helix/(β sheet + random coil) in secondary derivative proteins analysis showed tightness in the protein structures of FL. The relative abundance of Brocadia Sinica increased from 0 % in FL to a high of 20.46 % in LG. This study aims to communicate the essence of in-depth EPS analysis beyond the usual EPS yield and major contents of proteins (PN) and polysaccharides (PS) analysis.

Performance and mechanism of nitrate removal by the aerobic denitrifying bacterium JI-2 with a strong autoaggregation capacity

Here, a new strain JI-2 of the strongly autoaggregating aerobic denitrifying bacteria was screened. The nitrate removal ability and autoaggregation mechanism of JI-2 were analyzed using the nitrogen balance and genomics technology. The nitrate removal rate was 27.05 mg N/(L·h) at pH 9.0 and C/N 8.0. The strain JI-2 removes nitrate via the aerobic denitrification and dissimilation pathways and removes ammonium via the assimilation pathway. 66.81 % nitrate was converted to cellular components under aerobic conditions. Complex nitrogen metabolism genes were detected in strain JI-2. C-di-GMP mediates the motility behavior of JI-2 by binding the FleQ and PilZ proteins, and regulating the expression of PslA. Furthermore, the mechanism of autoaggregation was verified by extracellular polymeric substance analysis. Meanwhile, the nitrate removal rates of strain JI-2 was 11.13–12.50 mg N/(L·h) in wastewater. Thus, strain JI-2 has good prospects for application in the treatment of nitrate wastewater.

An in vitro study on the degradation of multispecies biofilm of periodontitis-related microorganisms by bovine trypsin.

To investigate the degradation effect of bovine trypsin on multispecies biofilm of periodontitis-related bacteria and to provide an experimental reference for exploring new methods for controlling biofilms of periodontitis-related microorganisms, the multispecies biofilm of periodontitis-related microorganisms was established. Standard strains of Porphyromonas gingivalis, Fusobacterium nucleatum subsp. polymorpha, Actinomyces viscosus, and Aggregatibacter actinomycetemcomitans were co-cultured to form the biofilm. The experimental groups were treated with bovine trypsin, distilled water was applied as the blank control group, and phosphate saline buffer (pH = 7.4) as the negative control group. Morphological observation and quantitative analysis of extracellular polymeric substances (EPS), live bacteria, and dead bacteria were conducted using a laser confocal microscope. The morphological changes of EPS and bacteria were also observed using a scanning electron microscope. The results of morphological observations of modeling were as follows. EPS aggregated as agglomerates, and bacteria flora were wrapped by them, showing a three-dimensional network structure, and channel-like structures were inside the biofilm. Live bacteria were distributed on the surface of the EPS or embedded in them, dead bacteria aggregated between live flora and the bottom layer of biofilms. After being treated with bovine trypsin, the three-dimensional network structure and the channel-like structure disappeared, and the EPS and live and dead bacteria decreased. Quantitative analysis results are as follows. When biofilm was treated for 30 s, 1 min, and 3 min, the minimum effective concentrations of bovine trypsin to reduce EPS were 2 mg/ml (P < 0.05), 0.5 mg/ml (P < 0.05), and 0.25 mg/ml (P < 0.05), respectively. The minimum effective concentrations of bovine trypsin to reduce the live or dead bacteria were 2 mg/ml (P < 0.05), 0.5 mg/ml (P < 0.05), and 0.5 mg/ml (P < 0.05), respectively. There was no significant difference in the ratio of live/dead bacteria after the biofilm was treated for 30 s with bovine trypsin at the concentration of 0.25, 0.5, 1, and 2 mg/ml (P > 0.05), and the minimum effective concentration to reduce the ratio of live bacteria/dead bacteria was 0.25 mg/ml (P < 0.05) after treatment for 1 min and 3 min. Therefore, bovine trypsin can destroy biofilm structure, disperse biofilm and bacteria flora, and reduce the EPS and bacterial biomass, which are positively correlated with the application time and concentration.

Pyrite activated peroxymonosulfate combined with as a physical-chemical conditioner modified biochar to improve sludge dewaterability: analysis of sludge floc structure and dewatering mechanism.

In this study, we proposed an advanced oxidation process of pyrite (FeS2) and peroxymonosulfate (PMS) and prepared a modified polyaluminum chloride biochar (P-BC). The motivation is to use the combination of FeS2 + PMS + P-BC to improve waste activated sludge (WAS) dewaterability. The method to improve the sludge dewatering effect with the combination of FeS2 + PMS + P-BC is as follows: in the first step, pour 0.75 g/g TSS FeS2 and 0.6 g/g TSS PMS into the sludge, and stir for 15 min. Then, add P-BC and stir for 5 min; complete the entire WAS processing process. The vacuum filtration test was used to evaluate the dehydration effect. The water content (Wc) and specific resistance to filtration (SRF) of the raw sludge can be reduced from the original values of 92% and 2.36 × 1013 m/kg to 67% and 9.89 × 1011 m/kg, respectively. The results showed that the combination of FeS2 + PMS + P-BC can effectively improve the sludge dewatering effect through oxidation. A laser particle size analyzer is used to observe changes in sludge particle size. The median diameter of sludge particles increased from 55.37 to 64.56 μm. A zeta analyzer to is used observe changes in sludge zeta potential. The zeta potential of sludge particles increased from − 15.8 to 0.4 mV. In the analysis of extracellular polymeric substances (EPS) of sludge, it was found that protein (PN) and polysaccharide (PS) in EPS decreased significantly. To further analyze the phenomenon of PN and PS drop, excitation-emission-matrix spectra (3D-EEM) was used. To observe the changes of sludge functional group, X-ray photoelectron spectroscopy was used. It was found that FeS2 + PMS + P-BC can destroy the functional groups of sludge, such as O–H, C–C, and O═C—NH– related to proteins and polysaccharides.Graphical abstract Supplementary InformationThe online version contains supplementary material available at 10.1007/s11356-022-21074-4.

Functional analysis of extracellular polymeric substances (EPS) during the granulation of aerobic sludge: Relationship among EPS, granulation and nutrients removal

Extracellular polymeric substances (EPS) with high molecular weights, secreted from microorganisms, play a critical functional role in the aerobic granular sludge (AGS). To investigate the level and function of EPS during the granulation of aerobic sludge and in the mature AGS, a sequencing batch reactor (SBR) was operated for 70 days. Aerobic granules with an average diameter of 0.25 mm were obtained with reducing settling time of sludge. Simultaneous removals of COD, nitrogen and phosphorus by the mature AGS exceeded 90, 95 and 95%, respectively. The EPS content increased significantly to above 333 mg/g MLVSS during the initial stage, and after that, it stabilized at about 240 mg/g MLVSS as the mature AGS formed, higher than that of the seed sludge (212 mg/g MLVSS). The increased EPS contents showed a negative correlation with SVI values, while a strong positive relationship with the formation of the AGS. The protein/polysaccharide (PN/PS) ratio in the EPS increased from 1.42 to 4.17, and TP/MLSS increased to about 6%, with the formation of AGS. The proportion of extracellular-P increased with the increase of EPS, and then maintained stable at about 20%, indicating EPS promoted the removal of phosphorus. Furthermore, the results from the Standards, Measurements and Testing (SMT) and X-Ray Diffraction (XRD) showed that phosphorus in the AGS mainly existed in the form of inorganic phosphorus (IP) and the proportion of Ca5(PO4)3(OH) in IP was up to 92%. This investigation demonstrated that EPS had a positive relationship with the sludge granulation and nutrients removal.

Response of Microbial Community to Natural Organic Matter Input in Lake Sediments

Increased loads of biogenic and terrestrial natural organic matter into freshwater lakes are projected to be a major consequence of global climate change and cyanobacterial blooms. In this study, the effects of phytoplankton-derived organic matter (POM) and terrestrial humic acid (HA) on the activity, composition, and function of the microbial community in Lake Taihu sediments were investigated. Fluorescent spectra demonstrated that POM with high chemodiversity was composed of labile protein-like components (50%) and recalcitrant humic-like components (50%), while humic-like substances accounted for 97% of HA. Over two-month periods, the organic carbon mineralization in sediments was enhanced owing to increasing NOM concentrations; however, the carbon consumption in POM-amended sediments was significantly higher than that in sediments amended with the same concentrations of HA. Analysis of extracellular polymeric substances indicated that NOM input improved the microbial secretion of proteins and polysaccharides, increasing the aggregation and stability of the microbial community. The amendment of POM also stimulated the activity of organic matter metabolic enzymes, promoting microbial activity. Moreover, 16S rRNA gene sequencing suggested that the mineralization of NOM (especially POM) increased the diversity of the microbial community, favored the survival of Proteobacteria and Bacteroidetes, and upregulated the function genes of organic matter metabolism. These results suggest that the composition and function of microbial community in sediments were associated with the origin, composition, and concentration of NOM input.

Enhanced dewaterability of waste activated sludge by UV assisted ZVI-PDS oxidation

Ultraviolet (UV) assisted zero-valent iron (ZVI)-activated sodium persulfate (PDS) oxidation (UV-ZVI-PDS) was used to treat waste activated sludge (WAS) in this study. The dewaterability performance and mechanism of WAS dewatering were analyzed. The results showed that UV-ZVI-PDS can obtain better sludge dewatering performance in a wide pH range (2.0-8.0). When the molar ratio of ZVI/PDS was 0.6, UV was 254nm, PDS dosage was 200 mg/g TS (total solid), pH was 6.54, reaction time was 20 min, the CST (capillary suction time) and SRF (specific resistance to filtration) were decreased by 64.0% and 78.2%, respectively. The molar ratio of ZVI/PDS used in this paper is much lower than that of literatures, and the contents of total Fe and Fe2+ in sludge supernatant remained at a low level, as 3.7 mg/L and 0.0 mg/L. The analysis of extracellular polymeric substances (EPS), scanning electron microscope (SEM) and particle size distribution showed that the EPS could be effectively destroyed by UV-ZVI-PDS, the sludge flocs broken down into smaller particles, cracks and holes appeared, and then the bound water was released. At the same time, the highly hydrophilic tightly bound-EPS (TB-EPS) were converted into loosely bound EPS (LB-EPS) and soluble EPS (S-EPS). During sludge pretreated by UV-ZVI-PDS, positively charged ions, such as Fe2+, Fe3+ and H+, produced in the reaction system could reduce the electronegativity of sludge surface, promote sludge particles aggregation, and then enhanced the sludge dewaterability.

Cr(VI) bioremediation by active algal-bacterial aerobic granular sludge: Importance of microbial viability, contribution of microalgae and fractionation of loaded Cr

In this study, chromium (Cr) was used as an example of the most toxic heavy metals that threaten human health, and Cr(VI) bioremediation was implemented by using a new type of aerobic granular sludge (AGS), i.e., algal-bacterial AGS. Results showed that the total Cr removal efficiency by active algal-bacterial AGS was 85.1 ± 0.6% after 6 h biosorption at pH 6 and room temperature, which could be further improved to 93.8 ± 0.4% with external electron donor (glucose) supply. However, inactivation dramatically decreased the total Cr removal efficiency to 29.6 ± 3.5%, and no effect was noticed when external electron donor was provided. With an antibiotic (levofloxacin) or metabolic inhibitor (NaN3) addition, the total Cr removal efficiency of bacterial AGS was inhibited by 16.0% or 10.1%, but this efficiency was maintained in the case of algal-bacterial AGS. Analysis of extracellular polymeric substances (EPS) composition revealed that under Cr(VI) exposure, more loosely bound EPS were secreted by algal-bacterial AGS, favoring Cr(VI) reduction. Results from chemical fractionation indicated that 90.5 ± 4.2% of the loaded Cr on algal-bacterial AGS was in an immobile form, reflecting the low environmental risk of Cr-loaded algal-bacterial AGS after biosorption of hazardous heavy metals from wastewater.