Cis Amide Research Articles

Helical twists and β-turns in structures at serine-proline sequences: Stabilization of cis-proline and type VI β-turns via C-H/O interactions.

Structures at serine-proline sites in proteins were analyzed using a combination of peptide synthesis with structural methods and bioinformatics analysis of the PDB. Dipeptides were synthesized with the proline derivative (2S,4S)-(4-iodophenyl)hydroxyproline [hyp(4-I-Ph)]. The crystal structure of Boc-Ser-hyp(4-I-Ph)-OMe had two molecules in the unit cell. One molecule exhibited cis-proline and a type VIa2 β-turn (BcisD). The cis-proline conformation was stabilized by a C-H/O interaction between Pro C-Hα and the Ser side-chain oxygen. NMR data were consistent with stabilization of cis-proline by a C-H/O interaction in solution. The other crystallographically observed molecule had trans-Pro and both residues in the PPII conformation. Two conformations were observed in the crystal structure of Ac-Ser-hyp(4-I-Ph)-OMe, with Ser adopting PPII in one and the β conformation in the other, each with Pro in the δ conformation and trans-Pro. Structures at Ser-Pro sequences were further examined via bioinformatics analysis of the PDB and via DFT calculations. Ser-Pro versus Ala-Pro sequences were compared to identify bases for Ser stabilization of local structures. C-H/O interactions between the Ser side-chain Oγ and Pro C-Hα were observed in 45% of structures with Ser-cis-Pro in the PDB, with nearly all Ser-cis-Pro structures adopting a type VI β-turn. 53% of Ser-trans-Pro sequences exhibited main-chain COi•••HNi+3 or COi•••HNi+4 hydrogen bonds, with Ser as the i residue and Pro as the i + 1 residue. These structures were overwhelmingly either type I β-turns or N-terminal capping motifs on α-helices or 310-helices. These results indicate that Ser-Pro sequences are particularly potent in favoring these structures. In each, Ser is in either the PPII or β conformation, with the Ser Oγ capable of engaging in a hydrogen bond with the amide N-H of the i + 2 (type I β-turn or 310-helix; Ser χ1 t) or i + 3 (α-helix; Ser χ1 g+) residue. Non-proline cis amide bonds can also be stabilized by C-H/O interactions.

4,4-Difluoroproline as a Unique 19F NMR Probe of Proline Conformation.

Despite the importance of proline conformational equilibria (trans versus cis amide and exo versus endo ring pucker) on protein structure and function, there is a lack of convenient ways to probe proline conformation. 4,4-Difluoroproline (Dfp) was identified to be a sensitive 19F NMR-based probe of proline conformational biases and cis-trans isomerism. Within model compounds and disordered peptides, the diastereotopic fluorines of Dfp exhibit similar chemical shifts (ΔδFF = 0-3 ppm) when a trans X-Dfp amide bond is present. In contrast, the diastereotopic fluorines exhibit a large (ΔδFF = 5-12 ppm) difference in chemical shift in a cis X-Dfp prolyl amide bond. DFT calculations, X-ray crystallography, and solid-state NMR spectroscopy indicated that ΔδFF directly reports on the relative preference of one proline ring pucker over the other: a fluorine which is pseudo-axial (i.e., the pro-4R-F in an exo ring pucker, or the pro-4S-F in an endo ring pucker) is downfield, while a fluorine which is pseudo-equatorial (i.e., pro-4S-F when exo, or pro-4R-F when endo) is upfield. Thus, when a proline is disordered (a mixture of exo and endo ring puckers, as at trans-Pro in peptides in water), it exhibits a small Δδ. In contrast, when the Pro is ordered (i.e., when one ring pucker is strongly preferred, as in cis-Pro amide bonds, where the endo ring pucker is strongly favored), a large Δδ is observed. Dfp can be used to identify inherent induced order in peptides and to quantify proline cis-trans isomerism. Using Dfp, we discovered that the stable polyproline II helix (PPII) formed in the denatured state (8 M urea) exhibits essentially equal populations of the exo and endo proline ring puckers. In addition, the data with Dfp suggested the specific stabilization of PPII by water over other polar solvents. These data strongly support the importance of carbonyl solvation and n → π* interactions for the stabilization of PPII. Dfp was also employed to quantify proline cis-trans isomerism as a function of phosphorylation and the R406W mutation in peptides derived from the intrinsically disordered protein tau. Dfp is minimally sterically disruptive and can be incorporated in expressed proteins, suggesting its broad application in understanding proline cis-trans isomerization, protein folding, and local order in intrinsically disordered proteins.

The effect of gem-difluorination on the conformation and properties of a model macrocyclic system.

Conformational control of drug candidates to engineer improved potency and ADME properties is an ongoing area of research. Macrocyclic rings tend to offer a greater degree of rigidity than non-cyclised small molecules, and, as a result they are perfect platforms to instil conformational controls. In this study, the difluoroalkoxyphenyl moiety is examined as a tool to alter the conformation of macrocycles. A fluorinated and non-fluorinated macrocyclic matched pair is compared in terms of conformation preferences and related ADME properties. The synthesised macrocycles are found to give similar major conformations exhibiting a trans amide in the macrocyclic backbone. However, for the fluorinated macrocycle, the major trans amide conformation is in equilibrium with a cis amide minor conformation, seen by 1H NMR in a 4 : 1 ratio of trans/cis. The conformational fits for the minor fluorinated isomer demonstrate the out of plane preference of the difluoroalkoxy system encouraging the amide within the macrocycle backbone to adopt a cis conformation. The fluorinated macrocycle was less metabolically stable compared to the non-fluorinated, postulated to be a result of the interconversion of trans amide to the cis amide, which potentially could be more readily metabolised.

Computational Investigation of Conformational Properties of Short Azapeptides: Insights from DFT Study and NBO Analysis.

Azapeptides have gained much attention due to their ability to enhance the stability and bioavailability of peptide drugs. Their structural preferences, essential to understanding their function and potential application in the peptide drug design, remain largely unknown. In this work, we systematically investigated the conformational preferences of three azaamino acid residues in tripeptide models, Ac-azaXaa-Pro-NHMe [Xaa = Asn (4), Asp (5), Ala (6)], using the popular DFT functionals, B3LYP and B3LYP-D3. A solvation model density (SMD) was used to mimic the solvation effect on the conformational behaviors of azapeptides in water. During the calculation, we considered the impact of the amide bond in the azapeptide models on the conformational preferences of models 4-6. We analyzed the effect of the HB between the side-chain main chain and main-chain main-chain on the conformational behaviors of azapeptides 4-6. We found that the predicted lowest energy conformation for the three models differs depending on the calculation methods. In the gas phase, B3LYP functional indicates that the conformers tttANP-1 and tttADP-1 of azapeptides 4 and 5 correspond to the type I of β-turn, the lowest energy conformation with all-trans amide bonds. Considering the dispersion correction, B3LYP-D3 functional predicts the conformers tctANP-2 and tctADP-3 of azapeptide 4 and 5, which contain the cis amide bond preceding the Pro residue, as the lowest energy conformation in the gas phase. The results imply that azaAsx and Pro residues may involve cis-trans isomerization in the gas phase. In water, the predicted lowest energy conformer of azapeptides 4 and 5 differs from the gas phase results and depends on the calculational method. For azapeptide 6, regardless of calculation methods and phases, tttAAP-1 (β-I turn) is predicted as the lowest energy conformer. The results imply that the effect of the side chain that can form HBs on the conformational preferences of azapeptides 4 and 5 may not be negligible. We compared the theoretical results of azaXaa-Pro models with those of Pro-azaXaa models, showing that incorporating azaamino acid residue in peptides at different positions can significantly impact the folding patterns and stability of azapeptides.

Unmasking the True Identity of Rapamycin's Minor Conformer.

Rapamycin, a well-known macrocyclic natural product with myriad biological activities, has been the subject of intense study since its first isolation and characterization over five decades ago. Rapamycin has been found to adopt a single conformation in the solid state (both when protein bound and uncomplexed) and exists as a mixture of two conformations in solution. Early work established that the major conformer in solution is the trans amide isomer but left the minor conformer mostly uncharacterized. Since that time, it has been widely accepted that the minor conformer of rapamycin is the cis amide, based solely on analogy to FK-506, another potent immunosuppressive compound with some shared key structural elements. To address this long-standing and unresolved question, the solution structure of the minor conformer of rapamycin was investigated using a combination of NMR techniques and computational methods and determined to be a trans amide species with rotation about the ester linkage.

The pH Response of a Peptoid Oligomer.

Polypeptoids are N-substituted glycine polymers, which differ from peptides in the placement of the side chain on the amide nitrogen rather than the Cα carbon. A peptoid with a chiral side chain containing both an aromatic group and carboxylic acid has a structure that responds to pH changes. All-atom molecular dynamics simulations using a force field specifically tuned for peptoids were carried out with an advanced sampling method for the peptoid (S)-N-(1-carboxy-2-phenylethyl)glycine in the high and low pH limits. The simulations show that the structure changes from mostly cis amide bonds at low pH to mostly trans bonds at high pH. The structural changes are driven by side chain-backbone hydrogen bonds at low pH and side chain repulsions and increased water contact at high pH.

A Unique and Stable Polyproline I Helix Sorted out from Conformational Equilibrium by Solvent Polarity.

Polyproline I helical structures are often considered as the hidden face of their most famous geminal sibling, Polyproline II, as PPI is generally spotted only within a conformational equilibrium. We designed and synthesized a stable Polyproline I structure exploiting the striking tendency of (S)-indoline-2-carboxylic acid to drive the peptide bond conformation toward the cis amide isomer, when dissolved in polar solvents. The cooperative effect of only four amino acidic units is sufficient to form a preferential structure in solution. We shed light on this rare secondary structure with a thorough analysis of the spectroscopic and chiroptical properties of the tetramer, supported by X-ray crystallography and computational studies.

Determination of Amide cis/trans Isomers in N-Acetyl-d-glucosamine: Tailored NMR Analysis of the N-Acetyl Group Conformation.

N‐Acetyl‐d‐glucosamine (GlcNAc) is one of the most common amino sugars in nature, but the conformation of its N‐acetyl group has drawn little attention. We report herein the first identification of NH protons of the amide cis forms of α‐ and β‐GlcNAc by NMR spectroscopy. Relative quantification and thermodynamic analysis of both cis and trans forms was carried out in aqueous solution. The NH protons were further utilized by adapting protein NMR experiments to measure eight J‐couplings within the N‐acetyl group, of which six are sensitive to the H2‐NH conformation and two are sensitive to the amide conformation. For amide cis and trans forms, the orientation between H2 and NH was determined as anti conformation, while a small percentage of syn conformation was predicted for the amide trans form of β‐GlcNAc. This approach holds great promise for the detailed conformational analysis of GlcNAc in larger biomolecules, such as glycoproteins and polysaccharides.

Atomic View of Aqueous Cyclosporine A: Unpacking a Decades-Old Mystery.

An atomic view of a main aqueous conformation of cyclosporine A (CycA), an important 11-amino-acid macrocyclic immunosuppressant, is reported. For decades, it has been a grand challenge to determine the conformation of free CycA in an aqueous-like solution given its poor water solubility. Using a combination of X-ray and single-crystal neutron diffraction, we unambiguously resolve a unique conformer (A1) with a novel cis-amide between residues 11 and 1 and two water ligands that stabilize hydrogen bond networks. NMR spectroscopy and titration experiments indicate that the novel conformer is as abundant as the closed conformer in 90/10 (v/v) methanol/water and is the main conformer at 10/90 methanol/water. Five other conformers were also detected in 90/10 methanol/water, one in slow exchange with A1, another one in slow exchange with the closed form and three minor ones, one of which contains two cis amides Abu2-Sar3 and MeBmt1-MeVal11. These conformers help better understand the wide spectrum of membrane permeability observed for CycA analogues and, to some extent, the binding of CycA to protein targets.

Van der Waals interactions to control amide cis–trans isomerism

We discover the presence of local van der Waals (vdW) interactions at the cis amide bond in crystals of isobutyroyl–Pro–Val–OMe.

Experimental and Computational Analysis of the Solution and Solid‐State Conformations of Hexadepsipeptides from Beauveria felina

Comprehensive SummaryChemical investigation of Beauveria felina, a marine‐derived entomopathogenic fungus, obtained two new destruxin hexadepsipeptides (1 and 2) containing an L‐Ala5 residue instead of the usual N‐Me‐L‐Ala5. Interestingly, the presence of the L‐Ala5 residue enabled two slowly‐exchanging solution conformers with cis/trans (ILE3)‐(N‐Me‐Val4) amide bond for 1 and 2 with 1.5 : 1 and 1 : 1 cis/trans ratios, respectively, while only the conformer with cis amide bond was found in the solid‐state. The solution and solid‐state conformers were studied by NMR, X‐ray diffraction and solution and solid‐state ECD measurements, as well as by TDDFT‐ECD calculations. Structural (conformational) parameter‐activity correlations suggested that the extended destruxin geometry with the preferred cis (ILE3)‐(N‐Me‐Val4) bond probably resulted in improved bioactivity and reduced toxicity for the destruxin class. This was the first report on the interconversion phenomenon of cis/trans amide bonds of destruxin class, which could give insights in the development of bioactive destruxin agents with lower toxicity.

Deciphering the Backbone Noncovalent Interactions that Stabilize Polyproline II Conformation and Reduce cis Proline Abundance in Polyproline Tracts.

Proline (Pro) has a higher propensity to adopt cis amide geometry than the other natural amino acids, and a poly-Pro (poly-P) tract can adopt either a polyproline I (PPI, all cis amide) or a polyproline II (PPII, all trans amide) helical conformation. Recent studies have revealed a reduced abundance of cis amide geometry among the inner Pro residues of a poly-P tract. However, the forces that stabilize the polyproline helices and the reason for the higher trans amide propensity of the inner Pro residues of a poly-P tract are poorly understood. Herein, we have studied both Pro and non-Pro PPII helical sequences and identified the backbone noncovalent interactions that are crucial to the higher stability of the trans Pro-amide geometry and the preference for a PPII helical conformation. We show the presence of reciprocal CO···CO interactions that extend over the whole PPII helical region. Interestingly, the CO···CO interactions strengthen with the increase in the PPII helical chain length and the inner CO groups possess stronger CO···CO interactions, which could explain the reduced cis abundance of the inner Pro residues of a poly-P tract. We also identified a much stronger (∼0.9 kcal·mol-1) nO → σ*Cα-Cβ interaction between the N-terminal CO oxygen lone pair and the antibonding orbital (σ*) of their Cα-Cβ bonds. As the nO → σ*Cα-Cβ interaction is possible only in the trans isomers of Pro, this interaction should be crucial for the stabilization of a PPII helix. Finally, an unusual nN(amide) → σ*C-N interaction (∼0.3 kcal·mol-1) was observed between the peptidic nitrogen lone pair (nN) and the antibonding orbital (σ*C-N) of the subsequent C-terminal peptide C-N bond. We propose a cumulative effect of these interactions in the stabilization of a PPII helix.

A Proline Mimetic for the Design of New Stable Secondary Structures: Solvent-Dependent Amide Bond Isomerization of (S)-Indoline-2-carboxylic Acid Derivatives.

A thorough experimental and computational study on the conformational properties of (S)-indoline-2-carboxylic acid derivatives has been conducted. Methyl (S)-1-acetylindoline-2-carboxylate, both a mimetic of proline and phenylalanine, shows a remarkable tendency toward the cis amide isomer when dissolved in polar solvents. This behavior is opposite to the general preference of proline for the trans isomer, making indoline-2-carboxylic acid a good candidate for the design of different secondary structures and new materials.

Synthesis and conformation of backbone N-aminated peptides.

The chemical modification of peptides is a promising approach for the design of protein-protein interaction inhibitors and peptide-based drug candidates. Among several peptidomimetic strategies, substitution of the amide backbone maintains side-chain functionality that may be important for engagement of biological targets. Backbone amide substitution has been largely limited to N-alkylation, which can promote cis amide geometry and disrupt important H-bonding interactions. In contrast, N-amination of peptides induces distinct backbone geometries and maintains H-bond donor capacity. In this chapter we discuss the conformational characteristics of designed N-amino peptides and present a detailed protocol for their synthesis on solid support. The described methods allow for backbone N-amino scanning of biologically active parent sequences.

Enantiopure 5-CF3-Proline: Synthesis, Incorporation in Peptides, and Tuning of the Peptide Bond Geometry.

The straightforward synthesis of enantiopure 5-(R)-and 5-(S)-trifluoromethylproline is reported. The key steps are a Ruppert-Prakash reagent addition on l-pyroglutamic esters followed by an elimination reaction and a selective reduction. The solution-phase and solid-phase incorporation of this unprotected enantiopure fluorinated amino acid in a short peptide chain was demonstrated. Compared to proline, the CF3 group provides a decrease of the trans to cis amide bond isomerization energy and an increase of the cis conformer population.

Conformational control of N-methyl-N,N'-diacylhydrazines by noncovalent carbon bonding in solution.

In recent years, some X-ray structural and computational evidence has emerged for noncovalent carbon bonding (C-bond). However, evidence of C-bonds in solution is limited. Herein, from the conformational analyses of strategically designed N-methyl-N,N'-diacylhydrazines, we for the first time show that C-bonds can be modulated to control the conformational preferences of small molecules in solution. We show that unusual N(amide)C-X noncovalent carbon bonding interactions stabilize the trans-cis (t-c) amide bond rotamers of N-methyl-N,N'-diacylhydrazines over the expected trans-trans (t-t) rotamers.

Synthesis of Enantiopure ε-Oxapipecolic Acid.

A six-step synthesis of orthogonally protected (S)-ε-oxapipecolic acid is described, starting from a commercially available glutamate diester. The approach features mCPBA-mediated amine oxidation and an intramolecular Mitsunobu reaction to form the tetrahydrooxazine ring. The enantiopure building block was employed in the synthesis of a short model peptide to determine the amide rotamer preference N-terminal to the cyclic residue. In contrast to pipecolic acid, which exhibits a high cis amide population, the ε heteroatom in oxapipecolic acid exerts a strong trans substantiating effect through lone pair repulsion.

Discovery of amide-bridged pyrrolo[2,3-d]pyrimidines as tumor targeted classical antifolates with selective uptake by folate receptor α and inhibition of de novo purine nucleotide biosynthesis

We previously showed that classical 6-substituted pyrrolo[2,3-d]pyrimidine antifolates bind to folate receptor (FR) α and the target purine biosynthetic enzyme glycinamide ribonucleotide formyltransferase (GARFTase) with different cis and trans conformations. In this study, we designed novel analogs of this series with an amide moiety in the bridge region that can adopt both the cis and trans lowest energy conformations. This provides entropic benefit, by restricting the number of side-chain conformations of the unbound ligand to those most likely to promote binding to FRα and the target enzyme required for antitumor activity. NMR of the most active compound 7 showed both cis and trans amide bridge conformations in ~1:1 ratio. The bridge amide group in the best docked poses of 7 in the crystal structures of FRα and GARFTase adopted both cis and trans conformations, with the lowest energy conformations predicted by Maestro and evidenced by NMR within 1 kcal/mol. Compound 7 showed ~3-fold increased inhibition of FRα-expressing cells over its non-restricted parent analog 1 and was selectively internalized by FRα over the reduced folate carrier (RFC), resulting in significant in vitro antitumor activity toward FRα-expressing KB human tumor cells. Antitumor activity of 7 was abolished by treating cells with adenosine but was incompletely protected by 5-aminoimidazole-4-carboxamide (AICA) at higher drug concentrations, suggesting GARFTase and AICA ribonucleotide formyltransferase (AICARFTase) in de novo purine biosynthesis as the likely intracellular targets. GARFTase inhibition by compound 7 was confirmed by an in situ cell-based activity assay. Our results identify a “first-in-class” classical antifolate with a novel amide linkage between the scaffold and the side chain aryl L-glutamate that affords exclusive selectivity for transport via FRα over RFC and antitumor activity resulting from inhibition of GARFTase and likely AICARFTase. Compound 7 offers significant advantages over clinically used inhibitors of this class that are transported by the ubiquitous RFC, resulting in dose-limiting toxicities.

Unconstrained peptoid tetramer exhibits a predominant conformation in aqueous solution.

Conformational control in peptoids, N-substituted glycines, is crucial for the design and synthesis of biologically-active compounds and atomically-defined nanomaterials. While there are a growing number of structural studies in solution, most have been performed with conformationally-constrained short sequences (e.g., sterically-hindered sidechains or macrocyclization). Thus, the inherent degree of heterogeneity of unconstrained peptoids in solution remains largely unstudied. Here, we explored the folding landscape of a series of simple peptoid tetramers in aqueous solution by NMR spectroscopy. By incorporating specific 13 C-probes into the backbone using bromoacetic acid-2-13 C as a submonomer, we developed a new technique for sequential backbone assignment of peptoids based on the 1,n-Adequate pulse sequence. Unexpectedly, two of the tetramers, containing an N-(2-aminoethyl)glycine residue (Nae), had preferred conformations. NMR and molecular dynamics studies on one of the tetramers showed that the preferred conformer (52%) had a trans-cis-trans configuration about the three amide bonds. Moreover, >80% of the ensemble contained a cis amide bond at the central amide. The backbone dihedral angles observed fall directly within the expected minima in the peptoid Ramachandran plot. Analysis of this compound against similar peptoid analogs suggests that the commonly used Nae monomer plays a key role in the stabilization of peptoid structure via a side-chain-to-main-chain interaction. This discovery may offer a simple, synthetically high-yielding approach to control peptoid structure, and suggests that peptoids have strong intrinsic conformational preferences in solution. These findings should facilitate the predictive design of folded peptoid structures, and accelerate application in areas ranging from drug discovery to biomimetic nanoscience.

Towards Polymers with Molecular Auxeticity.

For many decades, it has been challenging to synthesize auxetic materials at the molecular level. Auxetic materials exhibit counterintuitive behavior; they expand perpendicularly to the direction in which they are stretched. An aromatic macrocycle containing a sequence of N-substituted and N-unsubstituted amides was designed to resemble the re-entrant structure found in macromolecular auxetic materials. Upon application of tensile force, bent cis amides change to linear trans amides. This was anticipated to trigger the expansion of the macrocycle perpendicular to the direction of the applied force. To investigate the proposed configurational change by atom force microscopy (AFM), we designed and prepared a cis-trans aramide motif incorporated into an end-functionalized polymer which ensured covalent attachment to the AFM tip. At large extensions, polymer chains were envisioned to unfold and induce cis-trans isomerization.