Amber Mutation In Gene Research Articles

Membrane insertion and assembly of epitope-tagged gp9 at the tip of the M13 phage

BackgroundFilamentous M13 phage extrude from infected Escherichia coli with a tip structure composed of gp7 and gp9. This tip structure is extended by the assembly of the filament composed of the major coat protein gp8. Finally, gp3 and gp6 terminate the phage structure at the proximal end. Up to now, gp3 has been the primary tool for phage display technology. However, gp7, gp8 and gp9 could also be used for phage display and these phage particles should bind to two different or more surfaces when the modified coat proteins are combined. Therefore, we tested here if the amino-terminal end of gp9 can be modified and whether the modified portion is exposed and detectable on the M13 phage particles.ResultsThe amino-terminal region of gp9 was modified by inserting short sequences that encode antigenic epitopes. We show here that the modified gp9 proteins correctly integrate into the membrane using the membrane insertase YidC exposing the modified epitope into the periplasm. The proteins are then efficiently assembled onto the phage particles. Also extensions up to 36 amino acid residues at the amino-terminal end of gp9 did not interfere with membrane integration and phage assembly. The exposure of the antigenic tags on the phage was visualised with immunogold labelling by electron microscopy and verified by dot blotting with antibodies to the tags.ConclusionsOur results suggest that gp9 at the phage tip is suitable for the phage display technology. The modified gp9 can be supplied in trans from a plasmid and fully complements M13 phage with an amber mutation in gene 9. The modified phage tip is very well accessible to antibodies.

In Vivo Bypass of Chaperone by Extended Coiled-Coil Motif in T4 Tail Fiber

The distal-half tail fiber of bacteriophage T4 is made of three gene products: trimeric gp36 and gp37 and monomeric gp35. Chaperone P38 is normally required for folding gp37 peptides into a P37 trimer; however, a temperature-sensitive mutation in T4 (ts3813) that suppresses this requirement at 30 degrees C but not at 42 degrees C was found in gene 37 (R. J. Bishop and W. B. Wood, Virology 72:244-254, 1976). Sequencing of the temperature-sensitive mutant revealed a 21-bp duplication of wild-type gene 37 inserted into its C-terminal portion (S. Hashemolhosseini et al., J. Mol. Biol. 241:524-533, 1994). We noticed that the 21-amino-acid segment encompassing this duplication in the ts3813 mutant has a sequence typical of a coiled coil and hypothesized that its extension would relieve the temperature sensitivity of the ts3813 mutation. To test our hypothesis, we crossed the T4 ts3813 mutant with a plasmid encoding an engineered pentaheptad coiled coil. Each of the six mutants that we examined retained two amber mutations in gene 38 and had a different coiled-coil sequence varying from three to five heptads. While the sequences varied, all maintained the heptad-repeating coiled-coil motif and produced plaques at up to 50 degrees C. This finding strongly suggests that the coiled-coil motif is a critical factor in the folding of gp37. The presence of a terminal coiled-coil-like sequence in the tail fiber genes of 17 additional T-even phages implies the conservation of this mechanism. The increased melting temperature should be useful for "clamps" to initiate the folding of trimeric beta-helices in vitro and as an in vivo screen to identify, sequence, and characterize trimeric coiled coils.

Characterization of Plys-proximal morphogenetic genes of transposable bacteriophage Mu.

Late during the bacteriophage Mu lytic cycle, Mu DNA must be matured and packaged from its dispersed integration sites in the host DNA in order to produce progeny virions. Whereas control of late gene transcription in Mu is becoming well understood, less is known about the phage morphogenetic process. To investigate the latter, we cloned and sequenced a approximately 4.3-kb region of the phage DNA beginning just upstream of the leftmost late promoter Plys. Previous mapping of amber mutations had located the lysis (lys) and proposed DNA maturation genes D and E in this region. When the DNA sequence was analyzed, seven potential open reading frames were found. DNA sequence analysis of amber mutations in genes D and E identified the sixth and seventh open reading frames as D and E, respectively. Cloning and expression of this region enabled production of cell-free protein extracts that specifically recognize the phage-encoded packaging sequence (pac), a characteristic exhibited by phage maturation enzymes. In addition, the E protein was found to share homology with the large subunit of many phage DNA maturation enzymes. These results support the hypothesis that D and E encode subunits of the Mu DNA maturation enzyme.

The major coat protein of filamentous bacteriophage f1 specifically pairs in the bacterial cytoplasmic membrane

Filamentous bacteriophage are long, thin single-stranded DNA viruses that infect male strains of Escherichia coli without killing the host. Each phage contains approximately 2700 copies of the major coat protein, pVIII, which exists as a 5.2 kDa cytoplasmic membrane protein prior to incorporation into phage. Studies from a number of groups analyzing the behavior of wild-type and mutant pVIII in detergents suggested that pVIII might pair under these conditions. In order to test whether pVIII molecules pair in vivo in the cytoplasmic membrane, four plasmid-encoded pVIII variants were constructed in which specific residues in the transmembrane region were mutated to cysteine in an attempt to stabilize any pair via disulfide bridges. Variants A35C and I39C were unable to complement phage with an amber mutation in gene VIII. The I39C variant was unable to be packaged into phage particles even though it was inserted into the membrane. In the case of A35C, the inability to complement was not due to a packaging defect because the variant protein could be packaged into phage in the presence of wild-type pVIII. Western blot analysis of cytoplasmic membrane samples revealed that the A35C variant formed stable disulfide dimers in vivo. Expression of A35C interfered with wild-type phage infection, indicating that the assembly machinery may recognize the disulfide dimers in some non-productive way. The results indicate that pVIII may specifically pair along a particular face in the cytoplasmic membrane prior to assembly; however, these pairs must be able to be separated in order for normal assembly to occur.

Plasmid models for bacteriophage T4 DNA replication: requirements for fork proteins.

Bacteriophage T4 DNA replication initiates from origins at early times of infection and from recombinational intermediates as the infection progresses. Plasmids containing cloned T4 origins replicate during T4 infection, providing a model system for studying origin-dependent replication. In addition, recombination-dependent replication can be analyzed by using cloned nonorigin fragments of T4 DNA, which direct plasmid replication that requires phage-encoded recombination proteins. We have tested in vivo requirements for both plasmid replication model systems by infecting plasmid-containing cells with mutant phage. Replication of origin and nonorigin plasmids strictly required components of the T4 DNA polymerase holoenzyme complex. Recombination-dependent plasmid replication also strictly required the T4 single-stranded DNA-binding protein (gene product 32 [gp32]), and replication of origin-containing plasmids was greatly reduced by 32 amber mutations. gp32 is therefore important in both modes of replication. An amber mutation in gene 41, which encodes the replicative helicase of T4, reduced but did not eliminate both recombination- and origin-dependent plasmid replication. Therefore, gp41 may normally be utilized for replication of both plasmids but is apparently not required for either. An amber mutation in gene 61, which encodes the T4 RNA primase, did not eliminate either recombination- or origin-dependent plasmid replication. However, plasmid replication was severely delayed by the 61 amber mutation, suggesting that the protein may normally play an important, though nonessential, role in replication. We deleted gene 61 from the T4 genome to test whether the observed replication was due to residual gp61 in the amber mutant infection. The replication phenotype of the deletion mutant was identical to that of the amber mutant. Therefore, gp61 is not required for in vivo T4 replication. Furthermore, the deletion mutant is viable, demonstrating that the gp61 primase is not an essential T4 protein.

Lysis protein T of bacteriophage T4.

Lysis protein T of phage T4 is required to allow the phage's lysozyme to reach the murein layer of the cell envelope and cause lysis. Using fusions of the cloned gene t with that of the Escherichia coli alkaline phosphatase or a fragment of the gene for the outer membrane protein OmpA, it was possible to identify T as an integral protein of the plasma membrane. The protein was present in the membrane as a homooligomer and was active at very low cellular concentrations. Expression of the cloned gene t was lethal without causing gross leakiness of the membrane. The functional equivalent of T in phage lambda is protein S. An amber mutant of gene S can be complemented by gene t, although neither protein R of lambda (the functional equivalent of T4 lysozyme) nor S possess any sequence similarity with their T4 counterparts. The murein-degrading enzymes (including that of phage P22) have in common a relatively small size (molecular masses of ca. 18,000) and a rather basic nature not exhibited by other E. coli cystosolic proteins. The results suggest that T acts as a pore that is specific for this type of enzyme.

Characterization of the mutant lytic state in lambda expression systems

The two propagative phases of bacteriophage lambda, lysogeny and lysis, can be used in concert to enhance productivity of recombinant expression systems. Lambda vectors carrying mutations to prevent both cell lysis and lambda DNA packaging in the lytic state have been shown to yield 100% stability of the product gene in lysogeny and to produce up to 15% of total cell protein as product beta-galactosidase in a mutant lytic state.(14) Despite these mutations, partial lysis of the culture was observed following induction of the cells from a lysogenic phase into the lytic state. To understand better the phage-host cell interactions and to investigate the possible cause(s) of lysis in these highly productive expression systems, we have made a detailed study of the suppressor-free system JM105(NM1070). We have found high levels of product (15% of total cell protein as beta-glactosidase) to be due chiefly to a high-copy number of lambda DNA in the mutant lytic state. There is partial lysis of the culture even in this suppressor-free system caused by a low-level natural suppression of the amber mutation in gene S of NM1070, resulting in accumulation of lambda endolysin. We have also monitored changes in cell growth and morphology upon induction of the lysogen. There is a slight increase in cell number that follows a linear relationship with time and a 25-fold increase in cell volume during recombinat protein production in the mutant lytic state.

Genetic control of capsid length in bacteriophage T4 VII. A model of length regulation based on DNA size

Four models for head length regulation in bacteriophage T4 are described and discussed. Several length mutants in the major capsid protein gene (23) were studied by sucrose gradient analysis, rotating gel analysis of DNA length, and by mixed infection gene dosage experiments with T4 amber mutants in gene 24. The results show that head length variation is quantized and highly specific, in that certain amino acid changes in gp 23 result in reproducible and well-defined head length phenotypes. These data are presented as being most consistent with a vernier-type of head length control mechanism.

Structure and inherent properties of the bacteriophage lambda head shell: VI. DNA-packaging-defective mutants in the major capsid protein

Some amino acid substitutions in the major capsid protein (gene E product) of lambda phage are found to cause a defect in DNA packaging. These substitutions permit initiation of DNA packaging and expansion of the prohead. However, cleavage of the concatemer DNA at the cos site takes place only to a very small extent, and the capsid eventually becomes empty. Interestingly, the mutations are suppressed by a decrease of the DNA length between the cos sites by 8000 to 10,000 bases. These properties are similar to those of amber mutants in gene D, which codes for the capsid outer-surface protein. Studies on the E missense D amber double mutant show that the E protein and the D protein contribute additively to the stabilization of the condensed form of the DNA molecule in phage heads.

A genetic selection for temperature-sensitive variants of the gene V protein of bacteriophage f1.

Complementary negative and positive genetic selections based on the activity of a plasmid-encoded bacteriophage f1 gene V are developed. The negative selection is based on an activity of the gene V protein in E. coli cells which markedly reduces the infection of those cells by f1-related viruses. In order to select against cells expressing active gene V protein, the cells are infected with the p'age R386, a derivative of f1 which confers resistance to chloramphenicol, and are plated in the presence of the antibiotic. Those cells which contain gene V protein are infrequently infected with the virus and are unable to grow in the presence of chloramphenicol; those which do not contain the gene V protein are readily infected and can grow in the presence of the antibiotic. The positive genetic selection consists of excising the gene V sequences from the plasmids and using them to replace the gene V of a bacteriophage f1 derivative containing an amber mutation in gene V. Only those genes which encode an active gene V protein can support phage growth and yield plaques. The two genetic selections can be combined in order to yield a substantial enrichment for genes encoding temperature-sensitive gene V proteins.

Differential expression of five tRNA(UAGTrp) amber suppressors in Caenorhabditis elegans.

Caenorhabditis elegans has 12 tRNA(UGGTrp) genes as defined by Southern analysis. In order to evaluate the function of the individual members of this multigene family, we sought to recover amber (UAG)-suppressing mutations from reversion experiments with animals carrying amber mutations in a nervous system-affecting gene (unc-13) or a sex-determining gene (tra-3). Revertants were analyzed by Southern blot, exploiting the fact that the CCA to CTA change at the anticodon creates a new XbaI site. Five different members of the tRNATrp gene family were identified as suppressors: sup-7 X, sup-5 III, sup-24 IV, sup-28 X, and sup-29 IV. All five suppressor genes were sequenced and found to encode identical tRNA(UAGTrp) molecules with a single base change (CCA to CTA) at the anticodon compared with their wild-type counterparts. The flanking sequences had only limited homology. The relative expression of these five genes was determined by measuring the efficiencies of suppressers against amber mutations in genes affecting the nervous system, hypodermis, muscle, and sex determination. The results of these cross-suppression tests showed that the five members of the tRNA(Trp) gene family were differentially regulated in a tissue- or development stage-specific manner.

Differential expression of five tRNA(UAGTrp) amber suppressors in Caenorhabditis elegans.

Caenorhabditis elegans has 12 tRNA(UGGTrp) genes as defined by Southern analysis. In order to evaluate the function of the individual members of this multigene family, we sought to recover amber (UAG)-suppressing mutations from reversion experiments with animals carrying amber mutations in a nervous system-affecting gene (unc-13) or a sex-determining gene (tra-3). Revertants were analyzed by Southern blot, exploiting the fact that the CCA to CTA change at the anticodon creates a new XbaI site. Five different members of the tRNATrp gene family were identified as suppressors: sup-7 X, sup-5 III, sup-24 IV, sup-28 X, and sup-29 IV. All five suppressor genes were sequenced and found to encode identical tRNA(UAGTrp) molecules with a single base change (CCA to CTA) at the anticodon compared with their wild-type counterparts. The flanking sequences had only limited homology. The relative expression of these five genes was determined by measuring the efficiencies of suppressers against amber mutations in genes affecting the nervous system, hypodermis, muscle, and sex determination. The results of these cross-suppression tests showed that the five members of the tRNA(Trp) gene family were differentially regulated in a tissue- or development stage-specific manner.

Organization of the early region of bacteriophage φ80: Genes and proteins

An EcoRI segment containing the early region of bacteriophage φ80 DNA that controls immunity and lytic growth was identified as a segment whose presence on a plasmid prevented growth of infecting φ80 cI phage. The nucleotide sequence of the segment ( EcoRI-F) and adjacent regions was determined. Based on the positions of amber mutations and the sizes of some gene products, the reading frames for five genes were identified. From the relative locations of these genes in the genome, the properties of some isolated gene products, and the analysis of the structures of predicted proteins, the following φ80 to λ analogies are deduced: genes cI and cII to their λ namesakes; gene 30 to cro; gene 15 to 0; and gene 14 to P. An amber mutation by which gene 16 was defined is a nonsense mutation in the frame for gene 15 protein, excluding the presence of gene 16. An amber mutation in gene 14 or 15 inhibits phage DNA synthesis, as is the case with their λ analogues, gene 0 or P. Some characteristics of proteins from the early region predicted from their primary structures and their possible functions are discussed.

Heat cleavage of bacteriophage T4 gene 23 product produces two peptides previously identified as head proteins.

During studies on the intracellular protein pools of bacteriophage T4, we found that amber mutants in gene 23 blocked the synthesis of a 20-kilodalton (kDa) protein. Radiolabeled amino acid pulses showed that the protein appears at 8 min postinfection with kinetics similar to those of other major late species. Pulse-chase experiments demonstrated that the 20-kDa protein behaves like a primary product and also revealed a 29-kDa protein which, like other proteins cleaved during head assembly, appeared only after a long chase. Both species have been identified as constituents of the T4 head and have resisted previous efforts to identify their genetic origin. The dependence of the 20- and 29-kDa head proteins on the presence of gene 23 protein (gp23) and the observation that the sum of their masses equalled that of mature cleaved gp23 suggested that these two proteins were derived from this major capsid species. Evidence is presented demonstrating that heating samples before electrophoresis causes peptide bond cleavages in gp23, leading to the formation of the two peptides. As predicted by the results of Rittenhouse and Marcus (Anal. Biochem. 138:442-448, 1984), the cleavage occurs at Asp-336-Pro-337 and at two other Asp-Pro sites. Limited heat-induced proteolysis followed by two-dimensional gel analysis provided a peptide map of gp23 useful in the characterization of its assembly-related cleavages.

Deoxycytidylate hydroxymethylase gene of bacteriophage T4. Nucleotide sequence determination and over-expression of the gene.

We describe two approaches to cloning and over-expressing gene 42 of bacteriophage T4, which encodes the early enzyme deoxycytidylate hydroxymethylase. In Bochum a library of sonicated fragments of wild-type phage DNA cloned into M13mp18 was screened with clones known to contain parts of gene 42. Two overlapping fragments, each of which contained one end of the gene, were cleaved at a HincII site and joined, to give a fragment containing the entire gene. In Corvallis a 1.8-kb fragment of cytosine-substituted DNA, believed to contain the entire gene, was cloned into pUC18 and shown to express the enzyme at low level. The cloned fragment bore an amber mutation in gene 42. From the DNA sequence of gene 42, the cloned gene was converted to the wild-type allele by site-directed mutagenesis. Both gene-42-containing fragments were cloned into the pT7 expression system and found to be substantially overexpressed. dCMP hydroxymethylase purified from one of the over-expressing strains had a turnover number similar to that of the enzyme isolated earlier from infected cells. In addition, the N-terminal 20 amino acid residues matched precisely the sequence predicted from the gene sequence. The amino acid sequence of gp42 bears considerable homology with that of thymidylate synthase of either host or T4 origin. The gene 42 nucleotide sequences of bacteriophages T2 and T6 were determined and found to code for amino acid sequences nearly identical to that of T4 gp42.

Multidimensional analysis of intracellular bacteriophage T7 DNA: effects of amber mutations in genes 3 and 19

By use of rate-zonal centrifugation, followed by either one- or two-dimensional agarose gel electrophoresis, the forms of intracellular bacteriophage T7 DNA produced by replication, recombination, and packaging have been analyzed. Previous studies had shown that at least some intracellular DNA with sedimentation coefficients between 32S (the S value of mature T7 DNA) and 100S is concatemeric, i.e., linear and longer than mature T7 DNA. The analysis presented here confirmed that most of this DNA is linear, but also revealed a significant amount of circular DNA. The data suggest that these circles are produced during DNA packaging. It is proposed that circles are produced after a capsid has bound two sequential genomes in a concatemer. The size distribution of the linear, concatemeric DNA had peaks at the positions of dimeric and trimeric concatemers. Restriction endonuclease analysis revealed that most of the mature T7 DNA subunits of concatemers were joined left end to right end. However, these data also suggest that a comparatively small amount of left-end to left-end joining occurs, possibly by blunt-end ligation. A replicating form of T7 DNA that had an S value greater than 100 (100S+ DNA) was also found to contain concatemers. However, some of the 100S+ DNA, probably the most branched component, remained associated with the origin after agarose gel electrophoresis. It has been found that T7 protein 19, known to be required for DNA packaging, was also required to prevent loss, probably by nucleolytic degradation, of the right end of all forms of intracellular T7 DNA. T7 gene 3 endonuclease, whose activity is required for both recombination of T7 DNA and degradation of host DNA, was required for the formation of the 32S to 100S molecules that behaved as concatemers during gel electrophoresis. In the absence of gene 3 endonuclease, the primary accumulation product was origin-associated 100S+ DNA with properties that suggest the accumulation of branches, primarily at the left end of mature DNA subunits within the 100S+ DNA.

Temperature sensitivity of the multiplication of bacteriophage T4 amber mutants on nonpermissive host: Characterization of the phenomenon

The existence of temperature sensitivity of the multiplication of amber mutants on a nonpermissive host has been established for a considerable number of mutants in tail and head genes and for mutants in some other T4 genes as well. Temperature sensitivity of multiplication appears to be gene specific, and is typical of amber mutants in genes the products of which are not numerous per phage or which play the role of catalytic factor. Moreover, in most cases temperature sensitivity is characteristic of amber mutants indefinite gene clusters.

Gene 18 protein of bacteriophage T7. Overproduction, purification, and characterization.

Genetic and physical analyses indicate that gene 18 protein of bacteriophage T7 is essential for packaging of T7 DNA. T7 DNA is replicated via linear intermediates, culminating in the formation of concatemers many genomes in length which are then packaged into capsids. In infections with phage carrying amber mutations in gene 18, development is blocked at the concatemer stage. Biochemical studies on the role of gene 18 protein in concatemer processing and DNA packaging have been hampered by its low level of expression of gene 18 during T7 infections. We have cloned gene 18 on a plasmid downstream from the bacteriophage lambda PL promoter controlled by the temperature-sensitive lambda repressor encoded by c 1857. Thermal induction leads to the expression of the 10,000-Da gene 18 protein to the extent of approximately 10% of the total protein after 2 h. The overexpressed gene 18 protein is susceptible to proteolytic degradation, a condition that can be alleviated by expression in an Escherichia coli strain carrying the lon100 deletion which reduces production of protease La. Extracts of induced cells will complement an extract of T7-infected cells lacking gene 18 protein for packaging of exogenous T7 DNA. The assay has been used to monitor the purification of gene 18 protein to essential homogeneity. The identity of the purified protein has been confirmed by sequencing of the N terminus. Gel filtration analysis suggests that the native protein is an octomer. Treatment of gene 18 protein with 3 M guanidine hydrochloride denatures it to a monomer. Removal of the denaturing agent by dialysis regenerates the octomeric structure and the ability to complement packaging extracts.

Structure and inherent properties of the bacteriophage lambda head shell: V. Amber mutants in gene E

A total of 940 amber mutants in gene E of bacteriophage lambda was isolated to study the structure-function relationship of the gene product, the major capsid protein. The mutants were mapped to 43 mutation sites, most of which have been located, albeit tentatively, at exact points in the known base sequence, by deletion mapping and by the specificity of mutagenesis and the patterns of suppression. The patterns of suppression were interpreted in terms of both the efficiency of insertion of amino acid residues by suppressors and the exchangeability of amino acid residues. The exchangeability seems to be related to the hydrophilicity of the residues themselves and their environment, as well as to the functional similarity between the replaced and the inserted amino acid residues. Suppression of two of the mutations resulted in the production of characteristic aberrant head-related structures, each showing a defect in a different functional site in the protein. This, together with the approximate positions of some specific missense mutations as determined in this study, revealed the distribution of the functional sites along the polypeptide chain of the gene E product.

Amber mutants in gene 67 of phage T4: Effects on formation and shape determination of the head

Two amber mutations in gene 67 of bacteriophage T4 were constructed by oligonucleotide-directed mutagenesis and the resulting mutated genes were recombined back into the phage genome and their phenotype was studied. The 67 amK1 mutation is close to the amino terminus of the gene, and phage carrying this mutation are unable to form plaques on suppressor-negative hosts. A second mutation, 67 amK2, which lies in the middle of the gene, three codons N-terminal to a proteolytic cleavage site, produces a small number of viable phage particles. In suppressor-negative hosts, both mutants produce poly heads and proheads. 67 amK1 assembles only few proheads that have a disorganized core structure, as judged from thin sections of infected cells. The proheads and the mature phages of both mutants are mainly isometric rather than having the usual prolate shape. Depending on the 67 mutant and the host, between 20% and 73% of the particles that are produced are isometric, and 1 to 10% are two-tailed biprolate particles. 67 amK2 phages grown on a supD suppressor strain that inserts serine in place of the wild-type leucine do not contain gp67 ∗ derived from gene product 67 (gp67) by proteolytic cleavage. This demonstrates the importance of the correct amino acid at this position in the protein. Other abnormalities in these 67 amK2 phages are the presence of uncleaved scaffolding core proteins (IPIII and gp68), indicating a structural alteration in the prohead scaffold, resulting in only partial cleavage. In wild-type phages these proteins are found in the head only in the cleaved form. With double-mutants of 67 with mutations in the major shell protein gp23 no naked scaffolding cores were found, confirming the necessity of gp67 for the assembly or persistence of a “normal” core.