Allylic Sites Research Articles

Dual NHC/HAT‐Promoted Esterification to Access α‐Aryl Glycines

α‐Aryl glycines are among the more important carbonyl compounds, particularly as nonproteinogenic α‐amino acids present in many pharmacophores. As such, many strategies have been developed to access this motif, but direct carboxylation methods remain underdeveloped. Herein, we employ a dual NHC/HAT catalysis strategy to access 2‐azaallyl radicals, which subsequently couple with in situ generated ester azolium radical intermediates. Base‐mediated collapse of the ensuing tetrahedral intermediate liberates the NHC catalyst and benzophenone protected aryl glycine. This methodology was employed to esterify obtain a variety of aryl substituted glycine derivatives, as well as allylic and benzylic sites. Mechanistic studies reveal that this radical process operates under both oxidative and reductive quenching cycles, while preliminary experiments employing a chiral NHC and Lewis acid additive demonstrate modest enantioselectivity.

Farnesyl pyrophosphate synthase inhibitors with antiosteoporosis efficacy in ovariectomized rats: A mixed binding approach beyond bisphosphonates

The primary focus of bisphosphonate medications is on targeting human farnesyl pyrophosphate synthase (hFPPS), an essential regulator of mammalian isoprenoids. Yet, these drugs encounter limitations due to their restricted "druglike" properties and their effectiveness primarily in treating skeletal disorders. In this study, we synthesized novel non-bisphosphonate compounds, using 4,4'-(ethane-1,2-diylbis(oxy))bis(3-methoxybenzaldehyde) (1) as a starting compound, with the aim of targeting hFPPS through a mixed binding approach. Among the various compounds tested, compounds 4a and 4b exhibited significant inhibition of hFPPS activity, with IC50 values of 1.108 and 1.24 μM, respectively. Docking studies further revealed that both compounds bound within the allylic binding site and near the isopentenyl diphosphate (IPP) site within the hFPPS pocket. Molecular dynamic simulations were performed on the best docking pose of the most potent compound 4a to confirm the formation of a stable complex with hFPPS. In an in vivo study conducted on ovariectomized rats, various biochemical markers including osteocalcin, estradiol, osteoprotegerin, bone mineral content, and density were negatively impacted, while levels of bone specific alkaline phosphatase, receptor activator of nuclear factor kappa-Β ligand, serum/urinary calcium, and phosphate increased. Notably, compound 4a exhibited antiresorptive properties similar to zoledronate, effectively restoring most of the perturbed biochemical estimations. These findings suggest the potential of compound 4a, a non-bisphosphonate compound, as alternative therapeutic agents for combating osteoporosis.

Investigation of cyclopentene + OH and cyclopentene thermal decomposition reactions

This study presents the first high-temperature measurements of cyclopentene+OH→k1Products reaction over 856 – 1258 K and 1.03 – 4.33 bar. The determined rate coefficients of k1 exhibited Arrhenius temperature dependence with an activation energy ∼ 3.3 kcal mol−1 and negligible pressure dependence. Rate coefficients of OH + cyclopentene are faster than OH + 1-pentene but comparable to OH + 2-pentene, highlighting the significance of allylic CH bonds in these reactions. At 1258 K, our rate coefficient is ∼ 30 % slower than the average room-temperature measurement, indicating the role of OH-addition pathways at low temperatures. Site-specific rate coefficients and branching ratios are determined, with H-abstraction at the allylic CH site accounting for ∼68 % of the reaction and alkylic CH bond contributing ∼22 %. Our measured k1 may be given as (unit: cm3molecule−1s−1):k1=1.64×10−10e(−1660T)Cyclopentene decomposition reaction (cyclopentene→k2cyclopentadiene+H2) is studied over 1186–1472 K and 1.17 – 1.38 bar. Time-resolved yields of the product, cyclopentadiene, are monitored using a sensitive UV laser diagnostic near 220 nm. Absorption cross-sections of cyclopentadiene, measured in two separate mixtures, showed weak positive temperature dependence (8.7 – 9.8 × 10−18 cm2molecule−1) over 961 – 1326 K. Our rate coefficients of k2 exhibited a positive Arrhenius temperature dependence with an activation energy of ∼ 54.7 kcal mol−1. At 1300 K, the decomposition of cyclopentene proceeds 5.5 and 28 times faster than that of cyclopentadiene and cyclopentane, respectively. Our measured k2 may be expressed as (unit: s−1):k2=2.55×1012e(−27,527.6T)The pentagonal structure of cyclopentene influences its H-abstraction and decomposition reactions distinctively. While H-abstraction by OH follows a mechanism akin to cyclohexene and linear alkenes, with comparable rate coefficients at allylic CH bonds, the penta-ring structure significantly impacts the decomposition mechanism. Cyclopentene decomposition predominantly produces cyclopentadiene and H2 in a ring-conserving manner, differing from the cleavage of allylic-alkylic CC bonds in the decompositions of 1-alkenes and cyclohexene.

Theoretical Investigation on the H Atom Abstraction Reaction from C1-C4 Alkanes and Alkenes by ṄH2 Radicals.

The H atom abstraction reactions from alkanes and alkenes by ṄH2 are decisive in predicting the combustion characteristics of NH3/CxHy binary fuels. Theoretical investigation is carried out on the energy barriers of H atom abstraction reactions from C1-C4 alkanes/alkenes by ṄH2 radicals at the QCISD(T)/CBS//M06-2X/6-311++G(d,p) level of theory. Single-point energies of each species are computed using QCISD(T)/cc-pVDZ, TZ level of theories with basis set corrections from MP2/cc-pVDZ, TZ, and QZ methods. One-dimensional hindered rotor potentials are obtained by the M06-2X/cc-pVTZ method with 10° increment. Rate constants of each channel across temperatures of 298.15-2000 K are calculated by solving the RRKM/Master Equation with conventional transition state theory. For alkanes, rate constants order follows ktertiary> ksecondary> kprimary, while for alkenes the order follows kallylic> kprimary> kvinylic. Among the vinylic carbon sites within the same alkene species, the hydrogen atom sharing the same carbon with the allylic carbon on the C-C double bond is the preferred site for the H atom abstraction reaction. The branching ratio results indicate that the abstraction from tertiary or secondary carbon sites on alkanes and allylic carbon sites on alkenes are dominating during the investigated temperature range but become less important as the temperature increases. The data provided in this work are in good agreement with the literature data, but for the ṄH2+alkenes system, the literature data are scarce and further investigation is needed.

Prediction of Hydrogen Abstraction Rate Constants at the Allylic Site between Alkenes and OH with Multiple Machine Learning Models.

Hydrogen abstraction reactions between hydrocarbons and hydroxyl radicals are important propagation steps in radical chain reactions, playing a crucial role in atmospheric and combustion chemistry. This study focuses on predicting the rate constants of the prototype of the reaction class of hydrogen abstractions, i.e., the primary allylic hydrogen abstraction from alkenes by the OH radical, via utilizing machine learning (ML) methods. Specifically, three distinct models, namely, feedforward neural network (FNN), support vector regression (SVR), and Gaussian process regression (GPR), have been employed to construct robust ML models for prediction. We proposed a novel strategy that seamlessly integrates descriptor preprocessing, a pairwise linear correlation analysis, and a model-specific Wrapper method to enhance the effectiveness of the feature selection procedure. The selected feature subset was then evaluated using two cross-validation techniques, i.e., leave-one-group-out (LOGO) and K-fold cross-validations, for each of the three ML models (FNN, SVR, and GPR) to assess their predictive and stability performance. The results demonstrate that the FNN model, trained with seven representative descriptors, achieves superior performance compared to the other two methods. For the FNN model, the average percentage deviation is 39.06% on the test set by performing LOGO cross-validation, while the repeated 10-fold cross-validation achieves a percentage prediction deviation of 19.1%. Two larger alkenes with 10 carbons were selected to test the prediction performance of the trained FNN model on primary allylic hydrogen abstraction. Results show that the kinetic predictions follow well the modified three-parameter Arrhenius equation, indicating the reliable performance of FNN in predicting hydrogen abstraction rate constants, especially for the primary allylic site. Hopefully, this work can shed useful light on the application of ML in generating chemical kinetic parameters of hydrocarbon combustion chemistry.

Site-Selective Functionalization of Unactivated Allylic C-H Bonds via Direct Deprotonation with KTMP: Application to the Formal Total Synthesis of (+)-Artemisinin from Amorphadiene.

The site-selective functionalization of unactivated allylic C-H bonds via direct deprotonation using KTMP is described. The conversion of amorphadiene to artemisinic alcohol via a simple, highly regioselective deprotonation over 4 other possible allylic sites is shown with further extrapolation to the first large-scale telescoped chemical synthesis of artemisinic acid from amorphadiene. Finally, application of the method for the successful site-selective functionalization of unactivated allylic C-H bonds in other terpene-based natural products is also highlighted.

Investigation of cyclohexene thermal decomposition and cyclohexene + OH reactions

Cyclohexene is a common intermediate in the oxidation of cyclohexane and alkyl-substituted cyclohexanes. It also plays an important role in the formation of polycyclic aromatic hydrocarbons (PAHs) by providing a route for the first aromatic ring. Two types of reactions are highly important in cyclohexene kinetics, i.e., H-abstraction by OH radicals and cyclohexene thermal decomposition. In this work, we have investigated these two reactions experimentally by employing sensitive UV diagnostics of OH radicals and 1,3-butadiene. We conducted rate coefficient measurements of cyclohexene + OH reaction (k1) over 933–1259 K and 1–4 bar using a narrow-linewidth UV absorption diagnostic of OH radicals near 306.67 nm. The carefully designed test conditions minimized the influence of secondary reactions such as cyclohexene thermal decomposition. Our determined OH + cyclohexene high-temperature rate coefficients show a positive temperature dependence and a negligible pressure dependence. Our rate values may be fitted with a two-parameter Arrhenius expression (units of cm3molecule−1s−1):k1=1.28×10−10e(−1225T)We also investigated channel-specific competition in OH + cyclohexene reaction. H-abstraction by OH from allylic (kc), alkylic (kb), and vinylic (ka) CH bonds contributes roughly 60%, 35%, and 5% over our temperature range. Our determined kc agrees excellently with literature rate coefficient of H-abstraction from the allylic site of 1-butene.We studied cyclohexene thermal decomposition reaction (k2) by tracing the product 1,3-butadiene near 212.5 nm over 1092–1361 K and 0.82–1 bar. Compared to literature works, our highly sensitive UV diagnostic of 1,3-butadiene enabled time-resolved measurements with low cyclohexene concentration, which guaranteed nearly isothermal conditions despite reaction endothermcity. Our measured rate coefficients may be expressed as (unit of s−1):k2=3.68×1014e(−31,562T)We implemented our determined rate coefficients (k1 and k2) in a literature cyclohexene kinetic model and also updated the 1,3-butadiene sub-mechanism. The updated model shows improved predictions of measured ignition delay times of cyclohexene.

Turning abundant waste sulfur to polymers for manufacturing: Exploiting role of organic crosslinkers and benign catalysts

Abundant source of sulfur produced as byproduct of refineries demands sustainable valorization solutions. Use of organic crosslinkers and benign catalysts to polymerize sulfur for use in manufacturing offers a sustainable value-added application. This paper introduces MgO as an effective benign catalyst and oleic acid as an organic crosslinker for inverse vulcanization of sulfur. We further compare efficacy of MgO with other metal catalysts (ZnO and CaO) using molecular modeling and laboratory experiments. ZnO is commonly used in elastomeric formulations; however, industries try hard to keep the ZnO level low because of its environmental impact, particularly on aquatic organisms, and for economic reasons. Our rheological characterization shows the inverse vulcanization is enhanced when MgO is present as evidenced by the increase of viscosity of sulfur-oleic acid blends by 94 % relative to the blend without catalyst and 39 % relative to the blend with ZnO catalyst. Based on our quantum-based molecular modeling, using density functional theory (DFT), coordination complexes of Mg oleate (Mg (RCOO)2), made from the reaction between oleic acid and MgO, are energetically better stabilized compared to Zn or Ca oleate. Stronger interactions in Mg oleate, leading to the more stabilized coordination complexes, could be a reason for higher viscosity for MgO/sulfur-oleic acid compared to ZnO/sulfur-oleic acid. In complexes of sulfur and metal oleate, regardless of the electronic nature of sulfur chains (ionic or radical form), coordination complexes containing MgO show binding energies that are higher than those of Zn complexes and notably higher than those of Ca complexes, indicating capability of Mg substitution in Zn oleate compounds as catalysts. Studying the addition reactions of sulfur radicals to oleic acid and the formation of CS bonds, using DFT modeling, shows the superiority of allylic (CHCHĊH) sites of oleic acid over olefinic (CC) sites in reactions of sulfur radicals. Compared to sulfur radicals, sulfur chains in ionic character provide higher binding energies with metal oleates because of the electrostatic interactions between the positively charged metal and negative sulfur atoms. The study outcomes support sustainability and resource conservation in chemical manufacturing and petroleum refining industry.

Experimental and Kinetic Modeling Study on High-Temperature Autoignition of Cyclohexene.

Cyclohexene is an important intermediate during the oxidation of cycloalkanes, which comprise a significant portion of real fuels. Thus, experimental data sets and kinetic models of cyclohexene play an important role in the understanding of the combustion of cycloalkanes and real fuels. In this work, an experimental and kinetic modeling study of the high-temperature ignition of cyclohexene is performed. Ignition delay time (IDT) measurements are carried out in a high-pressure shock tube (HPST). The studied pressures are 5, 10, and 20 bar; the equivalence ratios are 0.5, 1.0, and 2.0; and the temperatures range from 980 to 1400 K for IDT in HPST. It is shown that the IDTs of cyclohexene exhibit Arrhenius behaviors as a function of temperature, and the IDTs decrease as the equivalence ratio and pressure increase. The experimental results are simulated using three previous detailed kinetic mechanisms and an updated detailed mechanism in this work. The updated detailed kinetic mechanism exhibits good agreement with experimental results. Reaction path analysis and sensitivity analysis are performed to provide insights into the chemical kinetics controlling the ignition of cyclohexene. The results demonstrate that different detailed kinetic mechanisms are significantly different, and there are still no unified conclusions about the major reaction path for cyclohexene oxidation. However, it is worth noting that the abstraction reaction by oxygen at the allylic site and the submechanism of cyclopentene are of significant importance for the accurate prediction of IDTs of cyclohexene. The present experimental data set and kinetic model should be valuable to improve our understanding of the combustion chemistry of cycloalkanes.

Exploring the kinetics and thermochemistry effects on C2-C6 alkene combustion chemistry by ȮH radical; Implications for Combustion Modeling and Simulation

A systematic theoretical study of C2 to C6 alkenes reacting with ȮH radical to explore the kinetics and thermochemistry effects are carried out in this work. The geometries and frequencies of 15 reactants, 15 pre-reaction complexes, 93 transition states, and 93 products are optimized at M06-2X/6-311++G(d,p) level of theory. The hindrance potentials for low-frequency torsional modes are treated at M06-2X/6–31 G level of theory. Single-point energies for all species involved in this work are calculated at spin-unrestricted CCSD(T)/CBS level of theory with basis-set correction from MP2/aug-cc-pVnZ (n = T and Q). High-pressure-limit rate constants for H-atom abstraction reaction channels and pressure-dependent rate constants for addition reaction channels are calculated by solving the Rice-Ramsperger Kassel-Marcus/Master Equation (RRKM/ME) implemented in the Master Equation System Solver (MESS) program, coupled with variational transition-state theory (VTST). Temperature-dependent thermochemical properties for all species and related radicals have been computed using a combination of composite methods to provide adequate accuracy results for modeling application. For straight-chain alkenes, the temperature range, in which the addition channel dominates, shifts to lower temperatures as the alkene gets longer. Hydrogen-atom abstractions from the allylic site of alkenes are the dominant reaction channels at high temperatures. The H-atom abstraction reactions from secondary alkylic and primary alkylic CH sites become more important as substituent groups become larger. High-pressure-limit and pressure-dependent rate constants calculated in this work have been extensively compared with the experimental and theoretical results available in the literature, and they show overall good agreement. The simulation results show that the calculated rate constants in this work have positive influences to the accuracy of simulation results at most reaction conditions. However, at some of the reaction conditions, thermochemical data have much more important influence to the simulation results at low temperature ranges. Rate constants obtained in this work and detailed branching ratio for each reaction can serve as a guidance in alkene combustion model development.

Enantioselective Organocatalyzed Mannich Reaction between Benzothiazolimines and α‐Benzylidene Succinimides for the Preparation of Chiral Benzothiazol Succinimides

AbstractA highly effective and selective bifunctional cinchona thiourea‐catalyzed new enantioselective Mannich reaction between benzothiazolimines and α‐benzylidene succinimides at allylic site has been developed and a series of chiral benzothiazol succinimides have been successfully prepared in good to excellent yields (up to 92% yield) with high diastereoselectivities (up to>20 : 1) and excellent enantioselectivities (up to>99% ee) under mild conditions

Reaction kinetics of 1,4-cyclohexadienes with OH radicals: an experimental and theoretical study.

This work presents the OH-initiated oxidation kinetics of 1,4-cyclochexadiene (1,4-CHD). The temperature dependence of the reaction was investigated by utilizing a laser flash photolysis flow reactor and laser-induced fluorescence (LPFR/LIF) technique over the temperature range of 295-438 K and a pressure of ∼50 torr. The kinetics of the reaction was followed by measuring the LIF signal of OH radicals near 308 nm. The reaction of OH radicals with 1,4-CHD exhibited a clear negative temperature dependence. To discern the role of various channels, ab initio and RRKM-based ME calculations (RRKM-ME) were performed over temperatures of 200-2000 K and pressures of 0.76-7600 torr. The computed energy profile revealed that the reaction proceeds via the formation of a pre-reaction van der Waals complex at the entrance channel. The complex was found to be more stable than that usually seen in other alkenes + OH reactions. Both the addition channel and the abstraction reaction of allylic hydrogen were found to have negative energy barriers. Interestingly, the abstraction reaction exhibited a negative temperature dependence at low temperatures and contributed significantly (∼37%) to the total rate coefficients even under atmospheric conditions. At T ≥ 900 K, the reaction was found to proceed exclusively (>95%) via the abstraction channel. Due to the competing channels, the reaction of OH radicals with 1,4-CHD displays complicated kinetic behaviours, reflecting the salient features of the energy profile. The role of competing channels was fully characterized by our kinetic model. The calculated rate coefficients showed excellent agreement with the available experimental data.

Direct H abstraction by molecular oxygen from unsaturated C3–C5 hydrocarbons: A theoretical study

AbstractPotential energy surfaces for the H abstraction reactions by molecular oxygen from unsaturated closed‐shell C3–C5 hydrocarbons, including allene and propyne (C3H4), propene (C3H6), diacetylene (C4H2), vinylacetylene (C4H4), 1,3‐butadiene (C4H6), butene isomers (C4H8), cyclopentadiene (C5H6), and cyclopentene (C5H8), which were earlier identified among the main pyrolysis products of jet fuel components, have been explored at the CCSD(T)‐F12/cc‐pVTZ‐f12//ωB97XD/6‐311G** + ZPE(ωB97XD/6‐311G**) level of electronic structure theory. The results of the ab initio calculations were then utilized in transition state theory calculations of the reaction rate constants. The H abstraction reactions by O2 appeared to be most favorable from the allylic sites and from allene and propyne forming the propargyl radical, with the reactions involving the cyclic allylic sites in cyclopentadiene and cyclopentene exhibiting the lowest reaction endothermicities and barriers. They are followed by the reaction of O2 with cyclopentene producing cyclopent‐1‐en‐4‐yl and the reactions with vinylacetylene and 1,3‐butadiene forming the resonantly stabilized i‐C4H3 and i‐C4H5 radical products. The H abstractions from primary and secondary vinylic sites as well as from acetylenic sites are significantly less favorable and unlikely to compete. The calculated rate constants have been validated against the previous experimental and theoretical results for propene and butene isomers. All considered reactions of H abstraction by O2 are predicted to be rather slow, with their rate constants at 1500 K being on the order of 10–17‐10–16 cm3 molecule–1 s–1 and exhibiting a well‐defined Arrhenius behavior. Modified Arrhenius expressions for the reaction rate constants both in forward and reverse directions and Evans–Polanyi relationship between the activation and reaction energies have been generated and proposed for kinetic combustion models. The H abstractions by O2 forming the resonantly stabilized radicals were concluded to likely contribute to the initiation of oxidation of the unsaturated C3–C5 species produced in the pyrolysis of the important components of jet fuels.

Hierarchical Auto-Ignition and Structure-Reactivity Trends of C2–C4 1-Alkenes

Ignition delay times of small alkenes are a valuable constraint for the refinement of the core kinetic mechanism of hydrocarbons used in representing combustion properties of real fuels. Moreover, the chemical reactivity comparison of those small alkenes provides a reference in object-oriented fuel design and logical combustion utilization. In this study, the ignition delay times of C2–C4 alkenes (ethylene, propene and 1-butene) were measured behind reflected shock waves first, with a fixed oxygen concentration (XO2 = 6%) and equivalence ratio (φ = 1.0) at various pressures of 1.2, 4.0 and 16.0 atm, in order to facilitate the comparison. Three chemical-based-Arrhenius-type correlations covering a wide range of temperature, pressure, equivalence ratio, and dilution were proposed. The simplified reaction network for pyrolysis and oxidation of 1-alkenes was depicted relying on the reaction classes of alkenes. Nine generally accepted mechanisms were used to simulate the ignition delay times measured by this study as well as literature. All the kinetic models show reasonable structure-reactivity trends for all of the three alkenes, but only NUIGMech 1.1 is capable of representing quantificationally the chemical reactivity at all tested conditions. Generally, ethylene exhibits the highest reactivity while propene presents the lowest at high temperatures. Analyses of sensitivity and flux indicate that the main oxidation pathway of ethylene is chain-branching, which accelerates the accumulation of free radical pools, especially for the Ḣ atom, Ȯ atom and ȮH radical, which results in the highest reactivity of ethylene. For propene and 1-butene, due to the presence of the allylic site, consumption of allylic radicals becomes the decisive step of oxidation and allylic radicals are mostly consumed by the HȮ2 radical. However, there are no such efficient reaction pathways for the formation of HȮ2 radicals during the propene oxidation process, while reaction pathways for HȮ2 formation in 1-butene are efficient. Thus, 1-butene presents higher reactivity compared to propene.

Low-temperature oxidation chemistry of 2,4,4-trimethyl-1-pentene (diisobutylene) triggered by dimethyl ether (DME): A jet-stirred reactor oxidation and kinetic modeling investigation

This paper explores the low-temperature (low-T) oxidation chemistry of 2,4,4-trimethyl-1-pentene (IC8D4, diisobutylene) by using jet-stirred reactor (JSR) experiments of both IC8D4/dimethyl ether (DME) mixture and pure IC8D4 at near atmospheric pressure and low temperatures. Oxidation species are measured using synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS), gas chromatography (GC) and GC combined with mass spectrometry (GC/MS). It is found that the oxidation of pure IC8D4 at atmospheric pressure presents negligible low-T reactivity and negative temperature coefficient (NTC) behavior, and that the oxidation reactivity of IC8D4/DME mixture is lower than that of butene/DME mixtures previously studied. A kinetic model for low-T IC8D4/DME oxidation is developed from recent oxidation models of IC8D4 and DME. Thermodynamic data of IC8D4 and key species in its sub-mechanism are obtained from theoretical calculations in this work, while rate constants of critical reactions are updated from recent theoretical calculation studies in literature. Based on the modeling analysis, four main pathways are found to be responsible for the consumption of IC8D4 at low temperatures. Among them, the first three pathways initiated by H addition, OH addition and H abstraction on allylic carbon sites are similar to those in 1-butene/DME and isobutene/DME oxidation. These three pathways are mainly responsible for promoting or retaining OH formation. The fourth pathway initiated by H abstraction on the alkyl carbon site differs from the other three in that it is only important in IC8D4/DME oxidation while not important in butenes/DME oxidation. This fourth pathway incorporates stepwise O2 addition and cycloaddition reaction sequences, which can promote and inhibit OH formation, respectively. The increasing contribution of this fourth pathway in IC8D4/DME oxidation reduces its reactivity compared to that of butenes/DME oxidation.

Unraveling the low-temperature oxidation mechanism between methyl crotonate radicals and O2

In this paper, chemical reaction kinetics at low temperatures on three different methyl crotonate (MC, C5H8O2) radicals with O2 were conducted via quantum chemical methods. The potential energy surfaces (PESs) for these reactions were investigated by M062x/6-311++G(d,p) and CBS-QB3 methods. The related rate coefficients also have been solved by master equations based on Rice-Ramsperger-Kassel-Marcus theory, predicting the competitive relationships over 300 to 1500 K and 0.001 to 100 atm. The calculated results indicated that the rate constants of O2 addition reaction at ester methylic site were higher than those at allylic sites, which showed that the conjugation effect caused by the C=C double bond has a crucial effect on the reaction process. Formation of initial adducts and intramolecular H-transfer reactions play a great role in the low temperature oxidation of MC. Furthermore, the mechanism of O2 addition to MC radicals was verified by the previous combustion model. The updated model did a good job to replicate the previous experimental results. This work not only provides the necessary rate constants for the reaction mechanism of MC combustion but also serves as a solid starting point for the further understanding of combustion kinetics of large molecule unsaturated biodiesels.

Rate rules for hydrogen abstraction reaction kinetics of alkenes from allylic sites by HO2 radical

Hydrogen abstraction reaction from allylic sites by HO2 radical is important in the ignition chemistry of alkenes. A systematic study with a series of C4-C7 alkenes as reactants is performed in present work to obtain the rate rules for the reaction class using G4 method coupled with transition state theory. The size and chain length of substituent groups and the configuration of reactant have little effect on the rate constants within a class. Hence, the rate rules are concluded by taking the average of the rate constants of a representative set of reactions. The reactivity for both alkenes and alkanes are similar with tertiary hydrogen possessing the highest activity and primary hydrogen possessing the lowest activity. The rate constants of alkanes and alkenes for these reaction classes are quite different at low temperatures. The obtained rate rules are applicable to the similar reaction classes of larger alkenes and alkanes.

Catalytic Allylic Oxidation to Generate Vinylogous Acyl Sulfonates from Vinyl Sulfonates.

Regioselective formation of vinylogous acyl sulfonates was accomplished via the allylic oxidation of the corresponding vinyl sulfonates. The reaction progressed through the agency of catalytic iron(III) chloride catalysis with tert-Butyl hydroperoxide (TBHP) as the stoichiometric oxidant. Tolerance of other functional groups, including some other allylic and benzylic sites, was observed.

Reaction Mechanisms and Kinetics of the Hydrogen Abstraction Reactions of C₄⁻C₆ Alkenes with Hydroxyl Radical: A Theoretical Exploration.

The reaction of alkenes with hydroxyl (OH) radical is of great importance to atmospheric and combustion chemistry. This work used a combined ab initio/transition state theory (TST) method to study the reaction mechanisms and kinetics for hydrogen abstraction reactions by OH radical on C4–C6 alkenes. The elementary abstraction reactions involved were divided into 10 reaction classes depending upon the type of carbon atoms in the reaction center. Geometry optimization was performed by using DFT M06-2X functional with the 6-311+G(d,p) basis set. The energies were computed at the high-level CCSD(T)/CBS level of theory. Linear correlation for the computed reaction barriers and enthalpies between M06-2X/6-311+G(d,p) and CCSD(T)/CBS methods were found. It was shown that the C=C double bond in long alkenes not only affected the related allylic reaction site, but also exhibited a large influence on the reaction sites nearby the allylic site due to steric effects. TST in conjunction with tunneling effects were employed to determine high-pressure limit rate constants of these abstraction reactions and the computed overall rate constants were compared with the available literature data.

The investigation of butyl acrylate grafting using model alkyds

Four model alkyds (stearic, oleic, linoleic, and linolenic model alkyds) were copolymerized with butyl acrylate (BA) in the presence of AIBN or BPO. 1H and 2D gHMQC NMR, Soxhlet extraction, and gas chromatography were used to characterize model alkyd–BA systems. It was found that mechanisms of grafting BA onto model alkyds were dependent on the structure of fatty acids in the model alkyds. In stearic model alkyd hybrid systems, BA homopolymer was the predominate pathway with minimal grafting via hydrogen abstraction from polyol backbone followed by termination with propagating BA radicals. Oleic model alkyd–BA systems improved the degree of grafting by direct addition of the BA free radical to the double bonds. Severe retardation of BA polymerization was observed in both linoleic and linolenic model alkyd–BA systems due to the presence of double allylic sites. A chain transfer process subsequently dominates the other free radical pathways leading to a high degree of grafting.