Increasing Alkyl Chain Length Research Articles

Formation and evolution of nanobubbles in CH4-H2O-Alcohol system: Insight into the effect of alcohol chain length from molecular dynamics simulations

Nanobubbles (NBs) which are gas filled cavities of nanometre dimensions present in liquids attracted increasing attention in the recent years due to their application in various fields such as chemistry, biology, medicine etc. An important aspect of NB research is the study of effect of additives on formation and evolution of these bubbles. The present study examined by applying molecular dynamics simulations, the formation and evolution of methane NBs in the CH4-H2O-Alcohol system, which is known to form during alcohol induced dissociation of CH4 hydrates in the natural gas extraction process. The effect of alcohol type and concentration on NB formation and evolution was examined through simulations of CH4-H2O-CH3OH, CH4-H2O-C2H5OH and CH4-H2O-nC3H7OH systems. The study revealed that increase in both concentration and the alkyl chain length of alcohols promoted NB formation. Alcohol molecules are found to enhance NB nucleation through accumulation near the NB-liquid interface resulting in a decrease in the surface tension (γ) at the interface. These effects become more pronounced as the alkyl chain length increases which explains the enhanced NB formation in systems containing nC3H7OH and C2H5OH compared to those containing CH3OH. The mechanism of formation and evolution of NBs is found to significantly depend on the type of alcohol present. NBs are found to nucleate at multiple locations in the systems containing nC3H7OH and C2H5OH which eventually coalesce to form a single large stable NB. In the presence of NBs which vary significantly in size, bubble growth was also found to occur through Ostwald ripening which involves transfer of CH4 from smaller NB to the larger one. In contrast, in the CH4-H2O-CH3OH system, primarily a single NB nucleated which grew in size through absorption of CH4 molecules dissolved in the liquid, rather than through coalescence or Ostwald ripening. The observed influence of alcohol type on the process of NB evolution is explained by examining the influence of alkyl chain length on γ and diffusivity of CH4 molecules. Due to the role of NBs on methane hydrate regeneration from the hydrate melt, we examined the influence of NB in the CH4-H2O-Alcohol system on the organization of water molecules (HSWs) present in the hydration shell of dissolved CH4. The value of F4 order parameter of HSWs and the number of hydrogen bonded water rings in the hydration shell of CH4 were analysed. The value of F4 order parameter indicate that the hydrophobic alkyl chain of alcohol induced hydrate like arrangement of HSWs, which is more pronounced in the case of alcohol with longer alkyl chain. However, alcohol molecules are also found to dislodge HSWs around CH4 resulting in a decrease in the number of water rings around dissolved CH4 which is not conducive to hydrate formation. These observations are consistent with the reported dual effect of alcohol on hydrate formation with alcohol promoting hydrate formation at low concentrations and inhibiting at high concentrations.

The Mechanism of Heterogeneous Ice Nucleation by Fatty Alcohol Monolayers.

Organic ice nucleating substances (INSs) are thought to play an essential role in cloud formation and, hence, precipitation and climate. Organic INSs are an important but poorly understood class of INSs in the atmosphere. To study organic INSs with exposed hydroxylated surfaces, researchers have previously used fatty alcohol monolayers as model systems. For alcohol monolayers, ice nucleation temperatures increase with increasing alkyl chain length and show a high-low oscillation following the number (odd-even) of carbon atoms in the alkyl chains. We employ atomistic models, together with molecular dynamics simulations, to investigate ice nucleation by C20H41OH, C30H61OH, and C31H63OH monolayers. As expected, we find that ice nucleation by alcohol monolayers depends on the lattice match to ice, and a poorer lattice match can at least partially account for the reduced ice nucleation ability of C20H41OH monolayers compared to monolayers of the longer chain alcohols. More interestingly, our simulations identify a limited range of alcohol configurations that readily nucleate ice via the basal plane. For configurations outside this range, ice nucleation did not occur on the time scale of our simulations (i.e., 5000 ns). The configurational feature that crucially influences ice nucleation is the angle between the alcohol C-O bond and the interfacial plane. C-O bonds directed sharply toward or away from the water phase strongly inhibit ice nucleation. In contrast, ice nucleation is easily observed for a relatively narrow band of C-O bond orientations centered about the surface plane. For comparable surface configurations, the ice nucleating abilities of C30H61OH and C31H63OH monolayers are practically identical, but the existence of a narrow band of ice-compatible surface configurations can perhaps explain why odd-chain alcohol monolayers are better INSs than even-chain alcohol monolayers. Earlier simulations have shown that for alcohols differing by a single carbon atom, the odd-chain monolayer is less rigid than the even-chain monolayer. This suggests the possibility that for odd-chain alcohol monolayers, the orientation of the C-O bonds can more easily adjust into the ice-compatible range than their even-chain counterparts, accounting for their enhanced ice nucleating ability.

Accelerated CO2 preferential permeation using graphene oxide confined ionic liquid membranes for CO2/H2 separation

Due to the enhanced mass transfer process of nanochannels and the high affinity of ionic liquids (ILs) for carbon dioxide (CO2), the membranes combined with 2D nanosheets and ILs have attracted significant attention in carbon capture, utilization, and storage (CCUS). However, regulating the structure of IL to enhance the separation performance of CO2 remains a big challenge. Herein, we selected different imidazolium-based ILs and proposed a simple strategy to prepare nano-confined IL membranes by intercalating ILs into graphene oxide (GO). These membranes are subsequently used to remove CO2 from industrial syngases, where they display an abnormal CO2 preferential permeation process relative to the smaller H2 molecule. Meanwhile, CO2 permeation decreases gradually with the increase of alkyl chain length, whereas CO2/H2 selectivity shows a tendency to first increase and then decrease. Interestingly, all GO-confined IL membranes surpass the Robeson upper bound, achieving peak CO2 permeance of 13.85 GPU and CO2/H2 selectivity of 13.58, respectively. Further characterization of the interlayer spacing and density functional theory (DFT) calculations reveal that the high CO2/H2 separation performance mainly arises from the fact that nano-confined ILs can block the transit of H2 through the dense packing structure, simultaneously enhancing CO2 solubility and permeability through the membrane. These quantitative insights into the nanoconfined IL membrane not only deepen the scientific understanding of the abnormal transfer process within the nanochannel but also propose novel methodologies for preparing high-performance CO2 capture membranes.

Study of mesomorphic, thermal and optical properties of 4-pentylbenzoic acid (5BA) and 4-n-alkyl-4́-cyanobiphenyl (nCB; n = 5, 6) supramolecular hydrogen bonded mesogenic complexes

Within the scope of this study, the process of producing and analyzing a liquid crystalline substance (supramolecular hydrogen-bonded mesogen) is presented. The formation of this mesogen involves the use of two chemicals, namely 4-pentylbenzoic acid (5BA) and 4-n-alkyl-4́-cyanobiphenyl (nCB; n = 5, 6). Equimolar (1:1) 5BA/5CB and 5BA/6CB binary combination samples have been organized by using one at a time mixing 5CB and 6CB liquid crystal chemical substances with 5BA. Differential scanning calorimetry (DSC) and polarized optical microscopy (POM) are employed for the examination of phase transitions, and liquid crystalline phase texture properties of the produced mesogens. The phase transformation sequence that occurred during heating and cooling is Crystal (Cr) ↔ Smectic A (SmA) ↔ Nematic (N) ↔ Isotropic (I) with the 1st order or weakly 1st order transition. The nematic range value observed for 5BA/6CB is considerably smaller than the nematic range value observed for 5BA/5CB, but the thermal mesophase range value for both is approximately the same. Fourier-transform infrared (FTIR) evaluation of 5BA, 5CB, and their hydrogen-bonded combos (5BA/nCB; n = 5, 6) confirmed attribute peaks. The X-ray diffraction (XRD) study revealed that the produced mesogens possess a crystalline structure. In addition, UV–Vis experiments demonstrated that the increase in alkyl chain length in the combination resulted in a decrease in absorbance and wavelength values, while leading to an increase in absorbency and band gap energy values. These results propose workable purposes for the synthesized substances in liquid crystal displays and other optoelectronic devices. Overall, the findings display the feasibility and viability of these novel hydrogen-bonded liquid crystalline mesogens in various technological applications.

Methylimidazolium ionic liquids - A new class of forever chemicals with endocrine disrupting potential

A class of chemical with a potentially important perceived future contribution to the net zero carbon goal (as “green” solvents) is the methylimidazolium ionic liquids (MILs). These solvents are used in industrial processes such as biofuel production yet little is known about their environmental stability or toxicity in man although one MIL – 1-octyl-3-methylimidazolium (M8OI) – has been shown to activate the human estrogen receptor alpha (ERα). The stabilities of the chloride unsubstituted methylimidazolium (MI) and MILs possessing increasing alkyl chain lengths (2C, 1-ethyl-3-methylimidazolium (EMI); 4C, 1-butyl-3-methylimidazolium (BMI); 6C; 1-hexyl-3-methylimidazolium (HMI), 8C, M8OI; 10C, 1-decyl-3-methylimidazolium (DMI)) were examined in river water and a human liver model system. The MILs were also screened for their abilities to activate the human ERα in vitro and induce uterine growth in pre-pubertal rats in vivo. Short chain MILs (EMI, BMI and HMI) underwent negligible metabolism and mineralisation in river water; were not metabolised in a model of human liver metabolism; activated the human ERα in vitro and were estrogenic in vivo in rats. A structure-based computational approach predicted short chain MIL binding to both the estrogen binding site and an additional site on the human estrogen receptor alpha. Longer chain MILs (M8OI and DMI) were metabolised in river water and partially mineralised. Based on structure-activity considerations, some of these environmentally-derived metabolites may however, remain a hazard to the population. MILs therefore have the potential to become forever chemicals with adverse effects to both man, other animals and the environment in general.

Effects of different alkyl chain lengths on excess properties of CO2-1-Butyl-1-methyl-pyrrolidinebis(trifluoromethanesulfonyl)imide, CO2-1-hexyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide, CO2-1-octyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide systems

The study investigates the solubility of carbon dioxide (CO2) in three ionic liquids [BMP][Tf2N] (1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide), [HMP][Tf2N] (1-hexyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide) and [OMP][Tf2N] (1-octyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide). The research is conducted over a temperature range of 303.15 to 363.15 K. The phase equilibria of the binary systems are predicted using the Peng-Robinson (PR) equation of state, the Wilson (WS) mixing rule and the UNIFAC activity coefficient model. The interaction parameter kij is regressed from the vapor-liquid equilibrium (VLE) experimental data. The study also calculates the excess Gibbs free energy (GE), excess enthalpy (HE), and excess entropy (SE) for these systems. The research results indicate that the length of the alkyl chain in the cation has a significant effect on the excess properties of the CO2-ionic liquid systems. As the alkyl chain length increases, the excess Gibbs free energy and excess enthalpy decrease, while the excess entropy increases. The CO2-[OMP][Tf2N] system exhibits stronger interactions between CO2 and the ionic liquid, indicating a higher capacity for CO2 absorption. The study results are helpful for optimization of CO2 capture processes and the broader comprehension of fluid phase equilibria in complex systems.

Manipulating the hydrophilic / hydrophobic balance in novel cationic surfactants by ethoxylation: The impact on adsorption and self-assembly

HypothesisCationic surfactants have a wide range of applications, often associated with their affinity for a range of solid surfaces and their anti-microbial properties. Manipulating their adsorption and self-assembly properties is key to most applications, and this is commonly achieved through surfactant mixtures or manipulating their headgroup or alkyl chain structure. Achieving this through adjustments to their headgroup structure is less common in cationic surfactants than in anionic surfactants. Ethoxylation provides the ability to adjust the hydrophilic / hydrophobic balance, as extensively demonstrated in a range of anionic surfactants. ExperimentsThis same approach has been applied here to a range of ethoxylated cationic surfactants in the form of the quaternary ammonium salts, and their tertiary nonionic equivalents before quaternisation. Their adsorption and self-assembly properties are investigated using predominantly the neutron scattering techniques of neutron reflectivity, NR, and small angle neutron scattering, SANS. FindingsThe trends in the adsorption at the air–water interface and the self-assembly in aqueous solution demonstrate how the hydrophilic / hydrophobic balance can be adjusted by varying the degree of ethoxylation and the alkyl chain length, and illustrate the degree of interdependence of the different structural changes. The variation in the adsorption and the micelle structure shows how the surfactant conformation / packing changes as the degree of ethoxylation and alkyl chain length increases and how the introduction of charge induces further changes.

Effect of alkyl chain length on the thermal properties and toxicity of n-alkyl-ammonium nitrate ionic liquids (n = 2, 3, 4, 5, 6, 8) for energy applications

AbstractThe most currently used ionic liquids (ILs) are protic ionic liquids (PILs), subject to extensive investigation regarding their physical properties. These compounds along with their mixtures with other substances such as salts and solvents, serve as electrolytes in next generation electrochemical smart devices, and emerge as viable candidates to replace conventional Heat Transfer Fluids (HTFs) in various energy applications. Despite the extensive number of studies, important information about this kind of compounds is still unknown, such as the effect of alkyl chain length on thermal and thermophysical properties, as well as toxicity. This work, extending previous studies of our group, summarizes the liquid range, heat capacity and acute toxicity level of six ammonium ILs: specifically, n-alkyl-ammonium nitrate ILs with increasing alkyl chain length (n = 2, 3, 4, 5, 6, 8). For this study, the synthesis of the three ILs with the longest alkyl chain was performed, along with DSC, TGA and toxicity measurements. It was observed that an increase in alkyl chain length resulted in a decrease in short-term thermal stability and an increase in melting temperature, indicating a reduction in the liquid range. A compensation effect between enthalpy and entropy of melting was observed for the studied chain lengths. The isobaric specific and molar heat capacities increase with temperature for all the compounds studied here, and good correlations were obtained between molar heat capacity and the number of carbon atoms in the alkyl chain for every temperature. Finally, most of the ILs are non-toxic, although toxicity increases with alkyl chain length.

Molecular interaction study using density, viscosity, speed of sound and FT-IR in 2-methyl-2-butanol + alkoxyethanols: Experimental and modelling approach

In this article, the intermolecular interactions in the binary liquid mixtures of 2-methyl-2-butanol with alkoxyethanols viz., 2-ethoxyethanol, 2-propoxyethanol and 2-butoxyethanol have been interpreted using thermophysical properties. Density (ρ), viscosity (η) and speed of sound (u) of pure components and their binary mixtures have been measured over the entire range of composition at 298.15, 303.15 and 308.15 K and at pressure p = 0.10 MPa. The experimental data were used to calculate the thermophysical properties such as excess molar volume (VmE), excess molar isentropic compressibility (Ks,mE), excess speed of sound (uE), deviation in viscosity (Δη) and excess Gibbs free energy of activation for viscous flow (ΔG∗E). The changes in these properties with composition and temperature of the liquid mixtures were discussed in terms of intermolecular interactions. Also, the effect of increase in alkyl chain length of alkoxyethanol molecule on these properties has been studied. The excess functions and their deviations have been correlated using Redlich-Kister type polynomial equation. The experimentally measured values of viscosities have been correlated with various semi-empirical relations such as Grunberg-Nissan, Tamura-Kurata, Hind et al., Katti-Chaudhri, McAllister’s two parameter model, Heric-Brewer and McAllister’s three parameter model. Apart from this, Prigogine-Flory-Patterson (PFP) theory has been used for the estimation of VmE values for studied binary mixtures. FT-IR spectra of these liquid mixtures have also been studied.

Understanding the Complexation of Alkyl-Substituted Nitrilotriacetamides with Uranium: A Study by Absorption Spectroscopy and Microcalorimetry.

Complexation thermodynamics of UO22+ ions with a series of alkyl-substituted nitrilotriacetamides (NTA) was investigated by absorption spectroscopy and microcalorimetry. The hexamethyl derivative of NTA (HMNTA) forms the weakest two successive complexes with UO22+ ions with stability constants of log β11 = 3.5 ± 0.1 and log β12 = 6.1 ± 0.1. The formation constant values increased linearly with increasing alkyl chain length of the substituents from hexamethyl NTA to hexabutyl NTA (HBNTA) and to hexahexyl NTA (HHNTA). The complexation with each ligand was both enthalpy and entropy driven with exothermic enthalpy changes of ΔH11 = -14.7 ± 1.0 kJ/mol, ΔH12 = -10.2 ± 0.8 kJ/mol for HMNTA, ΔH11 = -19.2 ± 1.2 kJ/mol, ΔH12 = -16.4 ± 1.1 kJ/mol for HBNTA, and ΔH11 = -21.3 ± 1.4 kJ/mol, ΔH12 = -19.4 ± 2.3 kJ/mol for HHNTA. Similarly, the positive entropy changes with each ligand were ΔS11 = 18.1 ± 2.7 J/mol/K, ΔS12 = 82.9 ± 3.8 J/mol/K for HMNTA, ΔS11 = 14.4 ± 1.2 J/mol/K, ΔS12 = 87.2 ± 4.2 J/mol/K for HBNTA, and ΔS11 = 16.1 ± 2.4 J/mol/K, ΔS12 = 92.6 ± 3.1 J/mol/K for HHNTA. Structural features of the complex suggest the participation of two ligands coordinating in a bidentate mode via the carbonyl oxygens. The [UO2L2]2+ complexes appear to be noncentrosymmetric with two ligands and one water molecule occupying the equatorial plane of the dioxo uranyl cation. The structure of the complex was confirmed by 1H NMR titration, EXAFS measurements, and DFT calculations.

Structures and hydrogen bonds of -SO3H functionalized acid ionic liquids

Brønsted acidic ionic liquids (BAILs) are clean and versatile replacements for traditional homogeneous acid catalysts and have attracted much attention as efficient catalysts for the synthesis of valuable chemicals. It’s critically important to understand the structural properties of BAILs from the molecular level. In this work, we studied a series of −SO3H functionalized acidic ionic liquids by density functional theory (DFT) calculations, and the most stable geometries were obtained by global semiempirical quantum mechanical search. The most stable structures of cations are formed when more intramolecular H-bonds exist. For BAILs clusters, intramolecular and intermolecular H-bonds coexist and play a critical role in the stability of the system. The interaction energy decreases with increasing alkyl chain length. When the alkyl chain was replaced by −SO3H groups, the interaction energy increased due to more H-bonds formed with the anions. The quasi-3D network is formed in the BAILs clusters and the electrostatic interaction plays a critical role in stabilizing the ion clusters. This work helps to understand the microcosmic interactions of BAILs in-depth and design them in a “task-specific” way.

Reversing the Trend: Deciphering Self-Assembly of Unconventional Amphiphiles Having Both Alkyl-Chain and PEG.

In the field of molecular self-assembly, the core of an assembly is always made up of hydrophobic moiety like a long alkyl chain, whereas the outer part has always been a hydrophilic moiety such as poly(ethylene glycol) (PEG), or charged species. Hence, reversing the trend to manifest self-assembled structures with a PEG core and a surface consisting of alkyl chains in aqueous system is incredibly challenging. Herein, we architected a unique class of cationic bolaamphiphiles containing low molecular weight PEG and alkyl chains of different lengths. The bolaamphiphiles spontaneously form vesicles without external stimuli. These vesicles are unprecedented because PEG makes up the vesicle core, while the alkyl chains appear on the vesicles' exterior. Hence, this particular design reverses the usual trend of self-assembly formation. The vesicle size increases with the increase in alkyl chain-length. To our great surprise, we obtained large micelles for longest alkyl-chain amphiphile, which in turn act as a gemini amphiphile. The shift from a particular bolaamphiphile to gemini amphiphile with the variation of alkyl chain is also unexplored. Therefore, this specific class of self-assembled structure would compound a new paradigm in molecular self-assembly and supramolecular chemistry.

Synthesis, Characterisation, and In Vitro Evaluation of Biocompatibility, Antibacterial and Antitumor Activity of Imidazolium Ionic Liquids.

In recent decades, ionic liquids (ILs) have garnered research interest for their noteworthy properties, such as thermal stability, low or no flammability, and negligible vapour pressure. Moreover, their tunability offers limitless opportunities to design ILs with properties suitable for applications in many industrial fields. This study aims to synthetise two series of methylimidazolium ILs bearing long alkyl chain in their cations (C9, C10, C12, C14, C16, C18, C20) and with tetrafluoroborate (BF4) and the 1,3-dimethyl-5-sulfoisophthalate (DMSIP) as counter ions. The ILs were characterised using 1H-NMR and MALDI-TOF, and their thermal behaviour was investigated through DSC and TGA. Additionally, the antimicrobial, anticancer, and cytotoxic activities of the ILs were analysed. Moreover, the most promising ILs were incorporated at different concentrations (0.5, 1, 5 wt%) into polyvinyl chloride (PVC) by solvent casting to obtain antimicrobial blend films. The thermal properties and stability of the resulting PVC/IL films, along with their hydrophobicity/hydrophilicity, IL surface distribution, and release, were studied using DSC and TGA, contact angle (CA), SEM, and UV-vis spectrometry, respectively. Furthermore, the antimicrobial and cytotoxic properties of blends were analysed. The in vitro results demonstrated that the antimicrobial and antitumor activities of pure ILs against t Listeria monocytogenes, Escherichia coli, Pseudomonas fluorescens strains, and the breast cancer cell line (MCF7), respectively, were mainly dependent on their structure. These activities were higher in the series containing the BF4 anion and increased with the increase in the methylimidazolium cation alkyl chain length. However, the elongation of the alkyl chain beyond C16 induced a decrease in antimicrobial activity, indicating a cut-off effect. A similar trend was also observed in terms of in vitro biocompatibility. The loading of both the series of ILs into the PVC matrix did not affect the thermal stability of PVC blend films. However, their Tonset decreased with increased IL concentration and alkyl chain length. Similarly, both the series of PVC/IL films became more hydrophilic with increasing IL concentration and alkyl chain. The loading of ILs at 5% concentration led to considerable IL accumulation on the blend film surfaces (as observed in SEM images) and, subsequently, their higher release. The biocompatibility assessment with healthy human dermal fibroblast (HDF) cells and the investigation of antitumoral properties unveiled promising pharmacological characteristics. These findings provide strong support for the potential utilisation of ILs in biomedical applications, especially in the context of cancer therapy and as antibacterial agents to address the challenge of antibiotic resistance. Furthermore, the unique properties of the PVC/IL films make them versatile materials for advancing healthcare technologies, from drug delivery to tissue engineering and antimicrobial coatings to diagnostic devices.

Tuning Sensing Efficacy of Oligo(phenylenevinylene) Based Chromogenic Probes: Effect of Alkyl Substituents on Metal Ion Detection at Micelle-Water Interface.

In this work, we conducted a comparative analysis of the metal ion sensing capabilities of two pyridine-end oligo p-phenylenevinylene compounds featuring different alkyl substituents (-C4H9 and -C16H33) within a micelle medium. Our findings revealed a correlation between the positioning of the probe molecules within the micelle and the length of the alkyl chains, impacting their self-assembly tendencies and optical characteristics. The compound with shorter alkyl chains demonstrated a superior affinity towards Hg2+ ions, whereas exposure to the compound with longer alkyl substituent resulted in a color-changing response with both Cu2+and Hg2+ ions. Intriguingly, the sensitivity towards Hg2+ ions heightened with increasing alkyl chain length. This trend persisted in non-polar solvents like THF. The capacity to modulate sensing efficacy solely by adjusting the length of the alkyl chains represents a relatively uncommon occurrence in the existing literature. This discovery suggests promising prospects for engineering sensory devices equipped with adaptable sensitivity.

Evolution of Surface Tension and Hansen Parameters of a Homologous Series of Imidazolium-Based Ionic Liquids.

In this study, we systematically analyze the surface tension and Hansen solubility parameters (HSPs) of imidazolium-based ionic liquids (ILs) with different anions ([NTf2]-, [PF6]-, [I]-, and [Br]-). These anions are combined with the classical 1-alkyl-3-methyl-substituted imidazolium cations ([CnC1Im]+) and a group of oligoether-functionalized imidazolium cations ([(mPEGn)2Im]+) based on methylated polyethylene glycol (mPEGn). In detail, the influences of the length of the alkyl- and the mPEGn-chain, the anion size, and the water content are investigated experimentally. For [CnC1Im]+-based ILs, the surface tension decreases with increasing alkyl chain length in all cases, but the magnitude of this decrease depends on the size of the anion ([NTf2]- < [PF6]- < [Br]- ≤ [I]-). Molecular dynamics (MD) simulations on [CnC1Im]+-based ILs indicate that these differences are caused by the interplay of charged and uncharged domains, in particular in the different anions, which affects the ability of the alkyl chains of the cation to orient toward the liquid-gas interface. An increase in the mPEGn-chain length of the [(mPEGn)2Im][A] ILs does not significantly influence the surface tension. These changes upon variation of the cation/anion combination do not correlate with the evolution of the HSPs for the two sets of ILs. Finally, our data suggest that significant water contents up to water mole fractions of x(H2O) = 0.25 do not significantly affect the surface tension of the studied binary IL-water mixtures.

Effect of Alkyl Chain Length on the Corrosion Inhibition Performance of Imidazolium-Based Ionic Liquids for Carbon Steel in 1 M HCl Solution: Experimental Evaluation and Theoretical Analysis.

In this study, five kinds of 1-alkyl-3-methylimidazolium bromide ([CXami]Br) ionic liquids with different alkyl chain lengths (8, 10, 12, 14, and 16) were selected as inhibitors. Then, their corrosion inhibition performances for Q235 steel in 1.0 mol L-1 HCl solution were investigated via a weight loss test, polarization curve method, and surface analysis techniques. The results show that these five imidazolium-based ionic liquids are all mixed-type inhibitors, and they can be spontaneously adsorbed onto the Q235 steel surface. The adsorption process follows the Langmuir model and involves mixed physical-chemical adsorption. Theoretical calculations confirm that the increase in alkyl chain length is conducive to the imidazolium-based ionic liquids exhibiting stronger chemical bonding abilities and forming denser adsorption films. The inhibition efficiency significantly increases below the critical micelle concentration (CMC) with an increase in alkyl chain length, and the highest inhibition efficiency is 95.17% for the [C16ami]Br inhibitor at the concentration of 0.005 mM. However, above the CMC, the inhibition efficiency is minimally affected by the alkyl chain length since all ionic liquid inhibitors have reached adsorption saturation on the steel surface.

Structural Analysis of Aggregates Formed by Linear- and Star-type Quaternary Ammonium Salt-Based Trimeric Surfactants Using Rheology and Small-Angle X-ray Scattering.

We performed a structural analysis of aggregates formed by two types of trimeric surfactants based on quaternary ammonium salts─linear-type 3Cnlin-s-Q and star-type 3Cntris-s-Q─featuring varying alkyl chain lengths (n) and spacer chain lengths (s) in aqueous solutions. We performed rheology, dynamic light scattering, and small-angle X-ray scattering measurements on the trimeric surfactants and investigated the effects of the alkyl chain length, spacer chain length, spacer skeleton structure, and surfactant concentration on their aggregation behavior. Linear-type 3C12lin-3-Q transitioned from gel solutions to worm-like micelles at high concentrations, and 3C14lin-3-Q became gel solutions over a wide range of concentrations. In contrast, all other studied surfactants formed ellipsoidal micelles. The minor and major axes of the ellipsoidal micelles formed by liner-type 3Cnlin-3-Q increased with the increasing alkyl chain length. As the spacer chain length of 3Cnlin-s-Q increased from 3 to 6, and as the spacer skeleton expanded from linear-type 3Cnlin-s-Q to star-type 3Cntris-s-Q, the surfactants formed ellipsoidal micelles without the formation of aggregates with a high-order structure, demonstrating this behavior over a broad concentration range.

Simulation of adsorption behavior for various functionalized graphene nanosheets containing alkyl chain/polymer nanocomposites using ReaxFF

The non-covalent interactions in polymer/functionalized graphene nanosheet (FGN) nanocomposites containing the alkyl chain were investigated in this study. For this purpose, the non-covalent interactions at the interfaces of the mentioned polymer nanocomposites were accurately assessed using reactive molecular dynamics (RMD) simulation. The considered structures included poly(3-(4-n-octyl)-phenylthiophene) (POPT) and poly(3-phenylhydrazone thiophene) (PPHT) with FGNs featuring primary amine (PA), secondary amine (SA), alkanolamine (AA), and diamine (D) functional groups in alkyl chain. The functional groups varied in alkyl chain lengths via n (n equal to carbon atoms). Results from RMD simulations highlighted that the minimum interaction energy occurred between polymers and G-SA 1 %. PPHT exhibited strong interactions with G-D-4 1 % and G-PA-16 1 %. Contrary to other FGN, especially G-PA 1 %, increasing alkyl chain length in G-SA 1 % negatively affected polymers/G-SA 1 % interaction energy. Moreover, Hydrogen bonding (H-bonding) was examined in all different nanocomposites of PPHT/FGN. Also, the effect of an increase in coverage percentage and temperature was evaluated. These findings offer valuable insights into interactions of polymer-FGN with different alkyl chain lengths, aiding in the design of tailored nanocomposites.

Short-chain fatty acids of various lengths differentially inhibit Klebsiella pneumoniae and Enterobacteriaceae species.

The gut microbiota is inextricably linked to human health and disease. It can confer colonization resistance against invading pathogens either through niche occupation and nutrient competition or via its secreted metabolites. Short-chain fatty acids (SCFA) are the primary metabolites in the gut as a result of dietary fiber fermentation by the gut microbiota. In this work, we demonstrate that the interaction of single-species gut commensals on solid media is insufficient for pathogen inhibition, but supernatants from monocultures of these commensal bacteria enriched in acetate confer inhibition against anaerobic growth of the enteric pathogen Klebsiella pneumoniae. The three primary SCFAs (acetate, propionate, and butyrate) strongly inhibit the intestinal commensal Escherichia coli Nissle as well as a panel of enteric pathogens besides K. pneumoniae at physiological pH of the cecum and ascending colon. This inhibition was significantly milder on anaerobic gut commensals Bacteroides thetaiotaomicron and Bifidobacterium adolescentis previously demonstrated to be associated with microbiota recovery after antibiotic-induced dysbiosis. We describe a general suppression of bacterial membrane potential by these SCFAs at physiological cecum and ascending colonic pH. Furthermore, the strength of bacterial inhibition increases with increasing alkyl chain length. Overall, the insights gained in this study shed light on the potential therapeutic use of SCFAs for conferring colonization resistance against invading pathogens in a dysbiotic gut.IMPORTANCERising antimicrobial resistance has made treatment of bacterial infections increasingly difficult. According to the World Health Organization, it has become a burgeoning threat to hospital and public health systems worldwide. This threat is largely attributed to the global rise of carbapenem-resistant Enterobacteriaceae in recent years, with common hospital-acquired pathogens growing increasingly resistant to last-line antibiotics. Antibiotics disrupt the homeostatic balance of the gut microbiota, resulting in the loss of colonization resistance against enteric pathogens. This work describes the ability of short-chain fatty acids (SCFAs) produced by gut microbiota to be effective against a wide panel of enteric pathogens without major impact on common gut commensal species. We also demonstrate a previously undescribed link between alkyl chain length and antibacterial effects of SCFAs. SCFAs, thus, hold promise as an alternative therapeutic option leveraging on the antimicrobial activity of these endogenously produced gut metabolites without disrupting gut microbiota homeostasis.

Role of Alkyl Chain Length in Surfactant-Induced Precipitation of Reactive Brilliant Blue KN-R

To develop a cost-effective method for the effective removal of reactive brilliant blue KN-R (RBB KN-R) from wastewater, we investigated the interactions between RBB KN-R and three cationic surfactants with different alkyl chain lengths, namely dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyltrimethylammonium bromide (CTAB). Employing a conductivity analysis, surface tension analysis, ultraviolet-visible spectrophotometry, and molecular dynamics simulation, we ascertained that RBB KN-R formed a 1:1 molar ratio dye–surfactant complex with each surfactant through electrostatic attraction. Notably, an augmentation in alkyl chain length correlated with increased binding strength between RBB KN-R and the surfactant. The resulting dye–surfactant complex exhibited heightened surface activity, enabling interactions through hydrophobic forces to generate dye–surfactant aggregates when the molar ratio was below 1:1. Within these mixed aggregates, self-assembly of RBB KN-R molecules occurred, leading to the formation of dye aggregates. Due to the improved hydrophobicity with increased alkyl chain length, TTAB and CTAB could encapsulate dye aggregates within the mixed aggregates, but DTAB could not. The RBB KN-R aggregates tended to distribute on the surface of the RBB KN-R-DTAB mixed aggregates, resulting in low stability. Thus, at a DTAB concentration lower than CMC, insoluble particles readily formed and separated from surfactant aggregates at an RBB KN-R and DTAB molar ratio of 1:4. Analyzing the RBB KN-R precipitate through scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) and measuring the DTAB concentration in the supernate revealed that, at this molar ratio, all RBB KN-R precipitated from the dye–surfactant mixed solution, with only 7.5 ± 0.5% of DTAB present in the precipitate. Furthermore, the removal ratio of RBB KN-R reached nearly 100% within a pH range of 1.0 to 9.0 and standing time of 6 h. The salt type and concentration did not significantly affect the precipitation process. Therefore, this simultaneous achievement of successful RBB KN-R removal and effective separation from DTAB underscores the efficacy of the proposed approach.