Alkenyl Silanes Research Articles

Visible Light‐Promoted Aerobic Oxidation of α‐Silyl Styrenes with Alcohols

Comprehensive SummaryA mechanistically distinctive visible‐light‐promoted metal‐free aerobic oxidation of alkenyl silanes with alcohols was disclosed to efficiently construct α‐alkoxy ketones under mild conditions. The primary, secondary, and tertiary alcohols could be used as reactants. The protocol could be carried out on a gram‐scale. Various derivatizations of products could be conducted. Mechanistic studies indicated the reaction was initiated by single‐electron oxidation of the alkenyl silanes, rather than radical addition to alkenyl silanes.

Co/Fe Dual Catalysis for Sequential Hydrosilylation–Isomerization: Access to Trisubstituted (E)‐Alkenyl Silanes from Terminal Alkynes

Comprehensive SummaryBy rational modification of electronic and steric properties of pincer ligands, a Co/Fe dual catalyst system is developed for one‐pot sequential Markovnikov alkyne hydrosilylation and stereoselective alkene isomerization. The protocol provides an atom‐economical and efficient approach to trisubstituted (E)‐alkenyl silanes from widely accessible terminal alkynes with high regio‐ and stereoselectivities under mild conditions. The utility of this reaction was demonstrated by gram‐scale synthesis and derivatization of bioactive molecules. The radical clock and trapping experiments indicated that radical pathway might be operative in the alkene isomerization step.

Ferrocenium Boronic Acid Catalyzed Deoxygenative Coupling of Alcohols with Carbon- and Nitrogen-Based Borate and Silane Nucleophiles.

A boronic acid catalyzed carbon-carbon and carbon-nitrogen bond-forming reaction for the functionalization of various π-activated alcohols has been developed. Ferrocenium boronic acid hexafluoroantimonate salt was identified as an effective catalyst in the direct deoxygenative coupling of alcohols with a variety of potassium trifluoroborate and organosilane nucleophiles. In a comparison between these two classes of nucleophiles, the use of organosilanes leads to higher reaction yields, increased diversity of the alcohol substrate scope, and high E/Z selectivity. Furthermore, the reaction proceeds under mild conditions and yields up to 98%. Computational studies provide a rationalization for a mechanistic pathway for the retention of E/Z stereochemistry when E or Z alkenyl silanes are used as nucleophiles. This methodology is complementary to existing methodologies for deoxygenative coupling reactions involving organosilanes, and it is effective with a variety of organosilane nucleophile sub-types, including allylic, vinylic, and propargylic trimethylsilanes.

Stereoselective C–O silylation and stannylation of alkenyl acetates

Facile formation of carbon-heteroatom bonds is a long-standing objective in synthetic organic chemistry. However, direct cross-coupling with readily accessible alkenyl acetates via inert C‒O bond-cleavage for the carbon-heteroatom bond construction remains challenging. Here we report a practical preparation of stereoselective tri- and tetrasubstituted alkenyl silanes and stannanes by performing cobalt-catalyzed C‒O silylation and stannylation of alkenyl acetates using silylzinc pivalate and stannylzinc chloride as the nucleophiles. This protocol features a complete control of chemoselectivity, stereoselectivity, as well as excellent functional group compatibility. The resulting alkenyl silanes and stannanes show high reactivities in arylation and alkenylation by Hiyama and Stille reactions. The synthetic utility is further illustrated by the facile late-stage modifications of natural products and drug-like molecules. Mechanistic studies suggest that the reaction might involve a chelation-assisted oxidative insertion of cobalt species to C‒O bond. We anticipate that our findings should prove instrumental for potential applications of this technology to organic syntheses and drug discoveries in medicinal chemistry.

Copper(I)-Catalyzed Regio- and Stereoselective Silaboration of Terminal Allenes.

Organic compounds bearing both silyl and boryl groups are important building blocks in organic synthesis because of the adequate reactivity of the silyl and boryl groups and high stereospecificity in their derivatization reactions. The difference in reactivity between the silyl and boryl groups enables stepwise derivatization of these groups to afford complex molecules. Here, we report the copper(I)-catalyzed silaboration of terminal allenes to produce multisubstituted allylic boronates embedded with an alkenyl silane structure. The reaction can proceed with a variety of allenes and silylboranes. Furthermore, the silyl and boryl groups were successfully converted into other functional groups, while retaining the stereochemistry of the alkene moiety.

One-Pot Synthesis of Styrene Derivatives from Allyl Silanes via B(C6F5)3-Catalyzed Isomerization-Hiyama Coupling.

Herein, we report a one-pot synthesis of styrene derivatives via a novel B(C6F5)3-catalyzed E-selective isomerization of readily accessible allyl silanes and subsequent Hiyama coupling of the versatile alkenyl silane intermediates. This one-pot, two-step approach enables access to a broad range of styrene derivatives, including those containing Lewis basic functional groups, that cannot be accessed via the previously developed B(C6F5)3-catalyzed isomerization of allyl benzenes.

Photocatalytic E→Z Contra-Thermodynamic Isomerization of Vinyl Silanes with Lewis Base.

Herein, we disclosed the contra‐thermodynamic E→Z isomerization of alkenyl silanes, according to the in situ formation of a chromophoric species, in the presence of rac‐BINAP as the catalyst. The reaction carried out in DMSO or CH3CN under irradiation at 405 nm allowed the interconversion of the E‐isomers into the Z‐congeners in good to excellent yields and outstanding Z/E selectivities, on 18 examples. Finally, the mechanism of this E→Z isomerization was studied to get insight into the reaction mechanism.

Synthesis of Stereodefined Trisubstituted Alkenyl Silanes Enabled by Borane Catalysis and Nickel Catalysis.

Regioselective and stereoselective synthesis of trisubstituted alkenyl silanes via hydrosilylation is challenging. Herein, we report the first β-anti-selective addition of silanes to thioalkynes with B(C6F5)3 as the catalyst. The reaction shows broad substrate scope. The products were proven to be useful intermediates to other trisubstituted alkenyl silanes by Ni-catalyzed stereoretentive cross-coupling reactions of the C-S bond. A mechanism study suggests that nucleophilic attack of thioalkyne to an activated silylium intermediate might be the rate-determining step.

Geometric E→Z Isomerisation of Alkenyl Silanes by Selective Energy Transfer Catalysis: Stereodivergent Synthesis of Triarylethylenes via a Formal anti-Metallometallation.

An efficient geometrical E→Z isomerisation of alkenyl silanes is disclosed via selective energy transfer using an inexpensive organic sensitiser. Characterised by operational simplicity, short reaction times (2 h), and broad substrate tolerance, the reaction displays high selectivity for trisubstituted systems (Z/E up to 95:5). In contrast to thermal activation, directionality results from deconjugation of the π‐system in the Z‐isomer due to A1,3‐strain thereby inhibiting re‐activation. The structural importance of the β‐substituent logically prompted an investigation of mixed bis‐nucleophiles (Si, Sn, B). These versatile linchpins also undergo facile isomerisation, thereby enabling a formal anti‐metallometallation. Mechanistic interrogation, supported by a theoretical investigation, is disclosed together with application of the products to the stereospecific synthesis of biologically relevant target structures.

Geometric E→Z Isomerisation of Alkenyl Silanes by Selective Energy Transfer Catalysis: Stereodivergent Synthesis of Triarylethylenes via a Formal anti‐Metallometallation

AbstractAn efficient geometrical E→Z isomerisation of alkenyl silanes is disclosed via selective energy transfer using an inexpensive organic sensitiser. Characterised by operational simplicity, short reaction times (2 h), and broad substrate tolerance, the reaction displays high selectivity for trisubstituted systems (Z/E up to 95:5). In contrast to thermal activation, directionality results from deconjugation of the π‐system in the Z‐isomer due to A1,3‐strain thereby inhibiting re‐activation. The structural importance of the β‐substituent logically prompted an investigation of mixed bis‐nucleophiles (Si, Sn, B). These versatile linchpins also undergo facile isomerisation, thereby enabling a formal anti‐metallometallation. Mechanistic interrogation, supported by a theoretical investigation, is disclosed together with application of the products to the stereospecific synthesis of biologically relevant target structures.

Brønsted Acid Catalyzed 1,2-Silyl Shift in Propargyl Silanes: Synthesis of Silyl Dienes and Silyl Indenes.

A general method for generation of allyl carbenium ions from propargyl silanes via a 1,2-silyl shift by Brønsted acids is reported. Two possible reaction pathways are described. Deprotonation results in silyl dienes with yields from 52% to 92%. Intramolecular Friedel-Crafts reactions of aryl-substituted systems give access to silyl indenes with yields of 18-90% depending on the substitution pattern. The obtained products have been shown to react as alkenyl silanes in Hiyama coupling and electrophilic substitution and as dienes in Diels-Alder cycloaddition.

Stereoselective Synthesis of Alkenyl Silanes, Sulfones, Phosphine Oxides, and Nitroolefins by Radical C–S Bond Cleavage of Arylalkenyl Sulfides

A radical-mediated approach has been introduced for the C-S bond activation of arylalkenyl sulfides. The protocol provides an efficient approach for the generation of various alkenes including alkenyl silanes, sulfones, phosphine oxides, and nitroolefins. In most cases, these radical substitutions are performed under metal-free conditions with stereospecificity.

Borane catalysed ring opening and closing cascades of furans leading to silicon functionalized synthetic intermediates.

The conversion of renewable biomass resources to synthetically valuable chemicals is highly desirable, but remains a formidable challenge in regards to the substrate scope and reaction conditions. Here we present the development of tris(pentafluorophenyl)borane–catalysed conversion of furans via ring-opening and closing cascade processes to afford silicon-functionalized synthetic chemicals under transition metal-free conditions. The furan ring-opening with hydrosilanes is highly efficient (TON up to 2,000) and atom-economical without forming any byproduct to give rise to α-silyloxy-(Z)-alkenyl silanes. Additional equivalents of silane smoothly induce a subsequent B(C6F5)3-catalysed cyclization of initially formed olefinic silane compounds to produce anti-(2-alkyl)cyclopropyl silanes, another versatile synthon being potentially applicable in the synthesis of natural products and pharmacophores.

Copper-Catalyzed Borylcupration of Allenylsilanes.

A highly regio- and stereoselective copper-catalyzed borylcupration of 1,2-allenylsilanes affords an unexpected regioreversed allylic boronate bearing an extra C-Si bond at the 3-position, with a thermodynamically disfavored Z geometry. Such stereodefined allylic boronates containing an extra alkenyl silane moiety are very useful organodimetallic reagents for organic synthesis.

Copper‐Catalyzed Borylcupration of Allenylsilanes

AbstractA highly regio‐ and stereoselective copper‐catalyzed borylcupration of 1,2‐allenylsilanes affords an unexpected regioreversed allylic boronate bearing an extra C−Si bond at the 3‐position, with a thermodynamically disfavored Z geometry. Such stereodefined allylic boronates containing an extra alkenyl silane moiety are very useful organodimetallic reagents for organic synthesis.

Bridging vs. Chelating Coordination Modes of Vinylsilanes in CuI π‐Complexes: Structure and Stability

AbstractTwo new copper(I) olefin complexes, [Cu6Cl6(MTrVS)2] (1) and [Cu2Cl2(DMVSP)2] (2), of tridentate bridging methyltrivinylsilane (MTrVS) and bidentate chelating 2‐[dimethyl(vinyl)silyl]pyridine (DMVSP) have been synthesized and characterized by single‐crystal X‐ray structure analysis, IR and 1H NMR spectroscopy. It has been shown that using the alkenylsilanes with required electronic properties, molecular symmetry and conformational flexibility, it is possible to control the formation of optimal copper(I) halide oligomers. The obtained results, together with relevant literature data, also illustrate how the coordination mode of vinylsilanes is related to Cu–(C=C) bond strengthening and, consequently, to stability of the organometallic compounds. In particular, we suggest that, together with Cu–Cα distance shortening accompanied by a segmentation of π‐conjugated chelate ring, complex shows an increased lability to form probably an alkenylcopper intermediate in the homocoupling reaction of alkenyl(2‐pyridyl)silanes. At the same time, no appreciable reduction of thermal stability of π‐conjugated chelate complex 2 with respect to bridged compound 1 emerges.

Stereoselective Synthesis of Disubstituted Butadienes via Copper-Mediated Coupling of Alkenyl Silanes

A strategy is described for the stereoselective synthesis of substituted (E)-, (Z)-, and α-disubstituted butadienes from terminal alkynes by the copper-mediated coupling of geometrically-defined alkenyl silanes. Proof-of-concept results that demonstrate the feasibility of this approach are presented.

Effect of various substituents on intramolecular 1,1-vinylboration, synthesis of 1-silacyclobutene derivatives

The reaction of 1-boryl-1-alkenyl chlorosilane derivatives with alkynyllithium reagents [Li-C\equiv C-R^3 (R^3~=~Ph, SiMe_3)] at low temperature (--78 °C) affords alkenyl(alkyn-1-yl)silanes. These compounds are precursors of 1-silacyclobutene derivatives, which are formed via intramolecular 1,1-vinylboration. This reaction works for various groups at silicon (R^1/R^2: R^1 = H, Me, Ph; R^2 = Me, Ph) and at the C=C and C\equiv C units (R/R^3: R = ^nBu, Ph; R^3 = ^nBu, Ph, SiMe_3). The conversion into 1-silacyclobutene derivatives is incomplete only in the case of R^3 = SiMe_3. The reactions were monitored by NMR spectroscopy in order to elucidate the reaction mechanism, and the proposed structures of all new compounds follow from consistent sets of NMR parameters (^1H-, ^{13}C-, ^{11}B-, ^{29}Si-NMR).

Palladium‐Catalyzed Cyclopropanation of Alkenyl Silanes by Diazoalkanes: Evidence for a Pd0 Mechanism

Alkenyl silanes are efficiently converted to the corresponding silyl cyclopropanes in the presence of a slight excess of diazomethane (2-4 equiv) and a low loading of Pd(OAc)(2) (<0.5 mol %). Diazoethane and diazobutane can also be employed and yield silyl cyclopropanes with diastereoselectivities of up to 10:1 for the trans isomer. When conducted on a 4 g scale, the reaction only required a catalyst loading of 5x10(-3) mol %, which corresponds to a turnover frequency of 40,000 h(-1). Competition experiments revealed that vinyl silanes can be selectively cyclopropanated in the presence of an aliphatic terminal alkene and styrene. The complex [Pd(0) (2)(DVTMS)(3)] (38, DVTMS = divinyltetramethyldisiloxane) proved to be an exceptionally active catalyst for the cyclopropanation reaction, giving complete conversion at -35 degrees C in 1 min. Intermolecular and intramolecular competition experiments with DVTMS (36), both with Pd(OAc)(2) and 38, provided strong evidence for a Pd(0)(alkenyl silane)(3) resting state. Detailed density functional calculations on the reaction pathways for the cyclopropanation of trimethylvinylsilane and DVTMS by diazomethane with Pd(0) corroborated the experimental observations.

ChemInform Abstract: Functionalized Fluoroalkyl and Alkenyl Silanes: Preparations, Reactions, and Synthetic Applications

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.