Aligned Orientations Research Articles

Surface-Conjugated Galactose on Electrospun Polycaprolactone Nanofibers: An Innovative Scaffold for Uterine Tissue Engineering.

The uterus, a vital organ in the female reproductive system, nurtures and supports developing embryos until maturity. This study focuses on addressing uterine related problems by creating a nanofibrous scaffold to regenerate uterine myometrial tissue, closely resembling the native extracellular matrix (ECM) for enhanced efficacy. To achieve this, we utilized polycaprolactone (PCL) as a biomaterial and employed an electrospinning technique to generate PCL nanofibers in both random and aligned orientations. Due to the inherent hydrophobic nature of PCL nanofibers, a two-step wet chemistry surface modification technique is used, involving the conjugation of galactose onto them. Galactose, a lectin-binding sugar, was chosen to enhance the scaffold's hydrophilicity, thereby improving cell adhesion and fostering l-selectin-based interactions between the scaffold and uterine cells. These interactions, in turn, activated uterine fibroblasts, leading to ECM remodeling. The optimized electrospinning process successfully generated random and aligned nanofibers. Subsequent surface modification was carried out, and the modified scaffold was subjected to various physicochemical characterization, such as the ninhydrin assay, enzyme-linked lectin assay techniques that revealed successful galactose conjugation, and mechanical characterization to assess any changes in material bulk properties resulting from the modification. The tensile strength of random galactose-modified PCL fibers reached 0.041 ± 0.01 MPa, outperforming random unmodified PCL fibers (0.026 ± 0.01 MPa), aligned unmodified PCL fibers (0.011 ± 0.001 MPa), and aligned modified PCL fibers (0.016 ± 0.002 MPa). Cytocompatibility studies with human uterine fibroblast cells showed enhanced viability and proliferation on the modified scaffolds. Initial pilot studies were attempted in the current study involving subcutaneous implantation in the dorsal area of Wistar rats to assess biocompatibility and tissue response before proceeding to intrauterine implantation indicated that the modification did not induce adverse inflammation in vivo. In conclusion, our study introduces a surface-modified PCL nanofibrous material for myometrial tissue engineering, offering promise in addressing myometrial damage and advancing uterine health and reproductive well-being.

Capillary-Assisted Assembly of Soft Conductive Polymer Nanopillar/Tube Arrays and Applications.

Nanopillar/tube arrays have emerged as encouraging platforms, possessing remarkable advantages, including large specific areas and highly aligned orientations. Despite the progress of nano/microfabrication technologies, facile and controllable fabrication of conductive polymer nanopillar/tube arrays remains challenging. In this study, we demonstrate that the air-liquid interfacial self-assembly can be extended to obtain three-dimensional nanostructured arrays. A smart and novel method is proposed for preparing uniform conductive polymer nanopillar/tube arrays by a template-mediated interfacial synthesis approach. By utilizing capillary force, precise control processes of the nanostructure and patterned structure can be easily realized. Furthermore, a transfer strategy is devised, allowing for scalable fabrication and expansion of the applicability. Applications, including antibacterial surfaces and actuators, have been demonstrated. We extend the air-liquid interfacial synthesis technique as a powerful and universal strategy for producing ordered nanopillar/tube arrays and show the great potential of soft nanostructured arrays as advanced platforms in diverse applications.

Study on Dynamic Characteristics of Magnetic Coagulation of Fe-Based Fine Particles in Iron and Steel Industry

Fine dust, represented by Fe-based fine particles and emitted from the production process of the iron and steel industry, is the primary factor causing many diseases represented by industrial pneumoconiosis, and ultra-low dust emission has always been a thorny problem to be solved urgently. To explore the magnetic coagulation effect of Fe-based fine particles in the magnetic field when removing them from industrial flue gas by the magnetic field effect in the iron and steel industry, using FLUENT software, magnetic dipole force was added between particles through user defined function (UDF) based on the computational fluid dynamics-discrete phase model (CFD-DPM) method so that the collision process of particles was then equivalent to their mutual trapping process. Next, the effects of particle size, particle volume fraction, external magnetic field strength, and particle magnetic susceptibility on the magnetic coagulation process were comprehensively studied. Meanwhile, the proton balance equation (PBE) was solved using the partition method on the basis of the computational fluid dynamics-population balance model (CFD-PBM) to compare the coagulation removal effect under random and aligned orientations of magnetic dipoles, respectively. The results showed that the magnetic coagulation strength under the random orientation of magnetic dipoles was greater than that under the aligned orientation. When the particle size of Fe-based fine particles increased from 0.5 μm to 1.5 μm, the magnetic coagulation coefficient decreased from 0.5414 to 0.2882, and the difference in the removal efficiency under the two different orientations of magnetic dipoles became smaller. When the particle volume fraction increased from 0.01 to 0.03, the magnetic coagulation coefficient increased from 0.2353 to 0.5061, and the difference in the removal efficiency under two orientations was enlarged. When the applied external magnetic field strength increased from 0.5 T to 1.0 T, the magnetic coagulation coefficient increased from 0.3940 to 0.5288, and the magnetic susceptibility increased from 0.0250 to 0.0500, the coagulation coefficient increased from 0.3940 to 0.5288, and the difference under two orientations basically stayed unchanged.

Nanofiber Configuration of Electrospun Scaffolds Dictating Cell Behaviors and Cell-scaffold Interactions

Electrospun nanofibers are of the same length scale as the native extracellular matrix and have been extensively reported to facilitate adhesion and proliferation of cells and to promote tissue repair and regeneration. With a primary focus on tissue repair and regeneration using electrospun scaffolds, only a few studies involved electrospun nanofiber scaffolds directing cell behaviors have been reported. In this study, we prepared electrospun nanofiber scaffolds with distinct fiber configurations, namely, random and aligned orientations of nanofibers, as well as oriented yarns, and investigated their effects on cell behaviors. Our results showed that these scaffolds supported good proliferation and viability of murine fibroblasts. Fiber configuration profoundly influenced cell morphology and orientation but showed no effects on cell proliferation rate. The yarn scaffold had comparable total protein accumulation with the random and aligned scaffolds, but it supported a greater proliferation rate of fibroblasts with significantly elevated collagen deposition due to its porous fibrous configuration. Cell-seeded yarn scaffolds showed a greater Young’s modulus compared with cell-free controls as early as 1 week. Together with its unique fiber configuration similar to the native extracellular matrix of the myocardium, the yarn scaffold might be a suitable matrix material for modeling cardiac fibrotic disorders.

Three-scale asymptotic homogenization of short fiber reinforced additively manufactured polymer composites

In this research, prediction of mechanical properties of short fiber-reinforced composites manufactured with the help of fused filament fabrication (FFF) process is investigated. Three-scale formulation of asymptotic homogenization is employed to upscale the properties from microscale to mesoscale and from mesoscale to macroscale. Since generating microscale representative volume element (RVE) infused with short fibers requires sophisticated modeling tools, the algorithm for the microscale RVE generation is presented and discussed. Homogenization was performed for microscale RVEs with random and aligned (fibers aligned with the beads on mesoscale) fiber orientations, and for mesoscale RVEs with unidirectional and 0/90 layup formation. Tensile tests were performed for different short carbon fiber concentrations 5, 7.5 and 10% (by volume) to validate predicted homogenized properties. Moreover, to analyze the morphology of 3D printed specimens, microstructural analysis using SEM was performed on all the printed specimens. Surface morphology helped to gain more insight into the bead structure and fiber distribution. It was concluded that Young's modulus prediction using random fiber orientation has low relative errors tested in bead direction. Overall, this study has unique contribution to mechanical property prediction for FFF-made short fiber-reinforced composite parts.

Random and aligned electrospun PLGA nanofibers embedded in microfluidic chips for cancer cell isolation and integration with air foam technology for cell release

BackgroundCirculating tumor cells (CTCs) comprise the high metastatic potential population of cancer cells in the blood circulation of humans; they have become the established biomarkers for cancer diagnosis, individualized cancer therapy, and cancer development. Technologies for the isolation and recovery of CTCs can be powerful cancer diagnostic tools for liquid biopsies, allowing the identification of malignancies and guiding cancer treatments for precision medicine.MethodsWe have used an electrospinning process to prepare poly(lactic-co-glycolic acid) (PLGA) nanofibrous arrays in random or aligned orientations on glass slips. We then fabricated poly(methyl methacrylate) (PMMA)-based microfluidic chips embedding the PLGA nanofiber arrays and modified their surfaces through sequential coating with using biotin–(PEG)7–amine through EDC/NHS activation, streptavidin (SA), and biotinylated epithelial-cell adhesion-molecule antibody (biotin-anti-EpCAM) to achieve highly efficient CTC capture. When combined with an air foam technology that induced a high shear stress and, thereby, nondestructive release of the captured cells from the PLGA surfaces, the proposed device system operated with a high cell recovery rate.ResultsThe morphologies and average diameters of the electrospun PLGA nanofibers were characterized using scanning electron microscopy (SEM) and confocal Raman imaging. The surface chemistry of the PLGA nanofibers conjugated with the biotin–(PEG)7–amine was confirmed through time-of-flight secondary ion mass spectrometry (ToF–SIMS) imaging. The chip system was studied for the effects of the surface modification density of biotin–(PEG)7–amine, the flow rates, and the diameters of the PLGA nanofibers on the capture efficiency of EpCAM-positive HCT116 cells from the spiked liquid samples. To assess their CTC capture efficiencies in whole blood samples, the aligned and random PLGA nanofiber arrays were tested for their abilities to capture HCT116 cells, providing cancer cell capture efficiencies of 66 and 80%, respectively. With the continuous injection of air foam into the microfluidic devices, the cell release efficiency on the aligned PLGA fibers was 74% (recovery rate: 49%), while it was 90% (recovery rate: 73%) on the random PLGA fibers, from tests of 200 spiked cells in 2 mL of whole blood from healthy individuals. Our study suggests that integrated PMMA microfluidic chips embedding random PLGA nanofiber arrays may be suitable devices for the efficient capture and recovery of CTCs from whole blood samples.

Bioinspired fiber-regulated composite with tunable permanent shape and shape memory properties via 3d magnetic printing

Shape memory polymers (SMPs) generally change shape from a temporary state to a permanent state, and the permanent shape is only determined by its initial form, which leads to the lack of design freedom for SMPs. In order to enrich morphing behavior and extend applications of SMPs, bioinspired design and fabrication methods need to be developed. Many biological dynamic materials enable shape changes ranging from bending, twisting to spiraling using site-specific aligned cellulose microfibers orientations. Here, we proposed an approach integrating bioinspired fiber architectures and varying 3D printing parameters into SMPs, to achieve tunable permanent shape and shape memory properties. The self-folded flower and sequentially deployed smart robotic hand have been developed to demonstrate the feasibility of our method. The proposed bioinspired SMPs, which is rarely seen in the previous reports, have intriguing fundamental properties and hold great potential for applications in soft actuators, smart textiles, wearable equipment, medical devices, and other intelligent apparatus.

Evaluation the effect of fiber alignment on particle collection performance of mechanical/electret filters based on Voronoi tessellations

The effect of fiber alignment on particle collection performance of mechanical/electret filters are investigated numerically. Four sets of fiber networks, namely, nearly isotropic, aligned, highly aligned and layered orientations are constructed using Voronoi tessellations. The particle transport and deposition process in these fiber networks under the coupling of flow field and electrostatic field are modeled using hybrid lattice Boltzmann Lagrangian method. The particle collection efficiencies and pressure drops of the mechanical/electret filters are calculated and compared. Results indicate that the mechanical filter with layered networks has the best filtration performance for large particles, and then the aligned networks has the next best performance. However, the sequence reverses when filtering the nanoparticles. In contrast to a mechanical filter, the electret filter with isotropic networks exhibits the best performance for full range of particles size, indicating that the dielectric attraction is less impacted by the 3D fiber orientations. Increasing fibers orientations in the airflow direction and constructing 3D pores of high sphericity are recommended to improve the performance of an electret filter.

Jahn–Teller distortion and thermal expansion anisotropy: temperature-dependent behavior of lindgrenite, Cu3(MoO4)2(OH)2, szenicsite, Cu3(MoO4)(OH)4, and cupromolybdite, Cu3O(MoO4)2

Thermal behavior of three copper molybdates, lindgrenite, Cu3(MoO4)2(OH)2, szenicsite Cu3(MoO4)(OH)4, and cupromolybdite, Cu3O(MoO4)2, has been studied by high-temperature X-ray powder diffraction in the temperature range of 25–900 °C. The decomposition of lindgrenite and formation of cupromolybdite were observed at T > 325 °C according to the reaction: Cu3(MoO4)2(OH)2 → Cu3O(MoO4)2 + H2O. Szenicsite decomposes to cupromolybdite and tenorite at T > 350 °C according to the reaction: 2Cu3(MoO4)(OH)4 → Cu3O(MoO4)2 + 3CuO + 2H2↑. Cupromolybdite is stable up to 825 °C. The thermal expansion of lindgrenite, szenicsite and cupromolybdite is strongly anisotropic; the values of αmax/αmin are 5.6, 11.0 and 4.3, respectively. The maximal/minimal thermal expansion refers to the dominant direction of long/short Cu–O bonds owing to the distortion of CuO6 octahedral geometry due to the Jahn–Teller effect. For all three Cu molybdates, there are more or less aligned orientations of Jahn–Teller-distorted (CuO6) octahedra, which allows calculating the average 〈Cu–O〉 bond lengths along particular crystallographic directions. The 〈Cu–O〉 values observed are found to be in good correlation with the observed anisotropy of thermal expansion. The additional O2− anions in cupromolybdite act as coordination centers that form four strong Cu–O bonds each. These bonds propagate along the direction of the minimal thermal expansion, thus showing that the anion-centered structural motifs in cupromolybdite are the strongest after the Mo6+-centered (MoO4) tetrahedra.

Nanotopographical cues of electrospun PLLA efficiently modulate non-coding RNA network to osteogenic differentiation of mesenchymal stem cells during BMP signaling pathway

Application of stem cells in combination with nanofibrous substrates is an interesting biomimetic approach for enhanced regeneration of damaged tissues such as bone and cartilage. The investigation of the complex interplay between nanotopographical cues of niche and noncoding RNAs in stem cells fate is an effective tool to find a new strategy for enhancing the induction of osteogenesis. In this study, we investigated the effects of aligned and random orientations of nanofibers as a natural ECM-mimicking environment on the network of noncoding RNA in mesenchymal stem cells. Aligned and randomly oriented Ploy (L-lactide) PLLA scaffolds were fabricated via electrospinning. Human Adipose Tissue-Derived Mesenchymal Stem Cells (hASCs) were isolated from adipose tissue and were cultured on surfaces of these scaffolds. Their capacity to support hMSCs proliferation was also investigated by MTT assay and the expression of c-Myc gene. Then, after 7, 14 and 21 days, the osteogenic commitment of hMSCs and the miRNA regulatory network in BMP signaling pathway were evaluated by measuring alkaline phosphatase (ALP) activity, extracellular calcium deposition, and bone-related gene activation by Real-Time PCR. Furthermore, osteogenic differentiation was evaluated with regard to their noncoding RNA network. Our results for the first time showed an interaction between nanotopographical cues and miRNA activity in hMSCs. We found that the nanotopographical cues could be used to influence the osteogenic differentiation process of hMSCs through the modulation of lncRNAs and miR-125b as negative regulators of osteogenesis as well as the H19 modulator BMP signaling pathway that acts as a miRNA sponge. Moreover, we also demonstrated for the first time that MEG3 as a long noncoding RNA is controlled by miR-125b and microRNA-triggered lncRNA decay mechanism. This strategy seems to be an important tool for controlling stem cell fate in engineered tissues and provide new insights into most biocompatible scaffolds for bone-graft substitutes.

Fabrication of random and aligned-oriented cellulose acetate nanofibers containing betamethasone sodium phosphate: structural and cell biocompatibility evaluations

Abstract: The objective of this work was to prepare electrospun cellulose acetate (CA) nanofibers containing betamethasone sodium phosphate (BSP). Two different morphologies including random and aligned orientations were rationally designed to improve the performance of samples in in vitro experiments. By comparing the CA nanofibrous samples with randomly and aligned-oriented morphologies, the scanning electron microscopy images showed that the neat aligned-oriented nanofibers with an average diameter of 180±15 nm could be obtained using a high-speed rotating collector. Subsequently, the tensile test confirmed that the aligned CA nanofibers had higher mechanical properties than that of the randomly oriented ones. Moreover, the BSP release profile obtained by UV-vis spectrophotometry depicted that the aligned samples had an initial burst release of BSP followed by a slow penetration of the drug with a gentle slope during 72 h. Furthermore, the ultimate amounts of BSP released from the random and aligned CA nanofibers into the phosphate buffer solution were 63% and 53%, respectively. Finally, human adipose-derived mesenchymal stem cells were seeded on both aligned and random electrospun CA nanofibrous samples containing BSP. The thiazolyl blue and hematoxylin and eosin staining results showed that the BSP-loaded nanofibers with the aligned morphology provided the most suitable environment for the cells’ growth, viability, and proliferation.

Nanofiber Alignment Regulates NIH3T3 Cell Orientation and Cytoskeletal Gene Expression on Electrospun PCL+Gelatin Nanofibers.

To examine the influence of substrate topology on the behavior of fibroblasts, tissue engineering scaffolds were electrospun from polycaprolactone (PCL) and a blend of PCL and gelatin (PCL+Gel) to produce matrices with both random and aligned nanofibrous orientations. The addition of gelatin to the scaffold was shown to increase the hydrophilicity of the PCL matrix and to increase the proliferation of NIH3T3 cells compared to scaffolds of PCL alone. The orientation of nanofibers within the matrix did not have an effect on the proliferation of adherent cells, but cells on aligned substrates were shown to elongate and align parallel to the direction of substrate fiber alignment. A microarray of cyotoskeleton regulators was probed to examine differences in gene expression between cells grown on an aligned and randomly oriented substrates. It was found that transcriptional expression of eight genes was statistically different between the two conditions, with all of them being upregulated in the aligned condition. The proteins encoded by these genes are linked to production and polymerization of actin microfilaments, as well as focal adhesion assembly. Taken together, the data indicates NIH3T3 fibroblasts on aligned substrates align themselves parallel with their substrate and increase production of actin and focal adhesion related genes.

Mapping galaxy encounters in numerical simulations: the spatial extent of induced star formation

We employ a suite of 75 simulations of galaxies in idealised major mergers (stellar mass ratio ~2.5:1), with a wide range of orbital parameters, to investigate the spatial extent of interaction-induced star formation. Although the total star formation in galaxy encounters is generally elevated relative to isolated galaxies, we find that this elevation is a combination of intense enhancements within the central kpc and moderately suppressed activity at large galacto-centric radii. The radial dependence of the star formation enhancement is stronger in the less massive galaxy than in the primary, and is also more pronounced in mergers of more closely aligned disc spin orientations. Conversely, these trends are almost entirely independent of the encounter's impact parameter and orbital eccentricity. Our predictions of the radial dependence of triggered star formation, and specifically the suppression of star formation beyond kph-scales, will be testable with the next generation of integral-field spectroscopic surveys.

Chemical vapor deposition growth of single-walled carbon nanotubes with controlled structures for nanodevice applications.

Single-walled carbon nanotubes (SWNTs), a promising substitute to engineer prospective nanoelectronics, have attracted much attention because of their superb structures and physical properties. The unique properties of SWNTs rely sensitively on their specific chiral structures, including the diameters, chiral angles, and handedness. Furthermore, high-performance and integrated circuits essentially require SWNT samples with well-aligned arrays, of single conductive type and of pure chirality. Although much effort has been devoted to chemical vapor deposition (CVD) growth of SWNTs, their structure control, growth mechanism, and structural characterizations are still the primary obstacles for the fabrication and application of SWNT-based nanodevices. In this Account, we focus on our established CVD growth methodology to fulfill the requirements of nanodevice applications. A rational strategy was successfully exploited to construct complex architectures, selectively enrich semiconducting (s) or metallic (m) SWNTs, and control chirality. First, well-aligned and highly dense SWNT arrays are beneficial for nanodevice integration. For the directed growth mode, anisotropic interactions between the SWNTs and the crystallographic structure of substrate are crucial for their growth orientation. Just as crystals possess various symmetries, SWNTs with controlled geometries have the corresponding turning angles. Their complex architectures come from the synergetic effect of lattice and gas flow directed modes. Especially, the aligned orientations of SWNTs on graphite are chirality-selective, and their chiral angles, handedness, and (n,m) index have been conveniently and accurately determined. Second, UV irradiation and sodium dodecyl sulfate (SDS) washing-off methods have been explored to selectively remove m-SWNTs, leaving only s-SWNT arrays on the surface. Moreover, the UV-assisted technique takes the advantages of low cost and high efficiency and it directly produces a high ratio of s-SWNT arrays. We also designed a smart scotch tape to sort out the s-SWNTs and m-SWNTs from the as-grown mixture with 3-aminopropyl-triethoxysilane and triethoxyphenylsilane as glues, respectively. This is analogous to the mechanical exfoliation of a graphene sheet. Third, the obtained SWNT intramolecular junctions obtained by temperature-mediated CVD indicate that temperature can seriously affect the SWNT's chirality during its growth. Importantly, the cloning method can validate the chirality-controlled growth of SWNTs, and the cloning efficiency is significantly improved on a quartz surface. Well-aligned SWNT arrays with a high density and controlled structures are highly desirable for carbon nanoelectronics. We hope that the advanced methodology used here will promote their controlled preparation and provide insights into the growth mechanism of SWNTs.

Anisotropic Membrane Diffusion of Human Mesenchymal Stem Cells on Aligned Single-Walled Carbon Nanotube Networks

The diffusion of lipids and proteins in cell membranes is involved in various cellular processes such as cell adhesion and cellular signaling. We report the anisotropic molecular diffusion in the membranes of human mesenchymal stem cells on aligned single-walled carbon nanotube networks. In this study, the cells were first cultured on the surfaces of glass, graphene, and carbon nanotube networks with random or aligned orientations. Then, the molecular diffusion constants of the cell membranes were measured using a fluorescence-recovery-after-photobleaching technique. The cells on graphene exhibited a diffusion constant comparable to that on glass substrate, while those on the rough surface of randomly oriented carbon nanotube networks exhibited a rather low diffusion constant. On the aligned carbon nanotube networks, the molecules in the cell membrane were found to diffuse faster along the direction parallel to the aligned carbon nanotubes than along the direction orthogonal to the nanotubes. These results indicate that the nanoscale properties of nanostructured materials may significantly affect the molecular diffusion in cell membranes and, possibly, related cellular processes.

Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites

The mechanical reinforcing efficiencies of two types of nanoparticles, nanotube and nanoplatelet, are compared from a micro-mechanics perspective. Additionally, the interphase zone created by altered dynamics of host polymer molecules in the vicinity of the nanoparticles is addressed. The results indicate that nanotubes generally have superior mechanical reinforcement potential beyond that of nanoplatelets for aligned orientations, while the high in-plane isotropic modulus of nanoplatelets allows better reinforcing in random orientations. However, at the same volume fraction, under the assumption of identical degree of dispersion and extent of influence on the surrounding polymer molecules, the nanotubes generate a significantly larger amount of interphase than the nanoplatelets. The interphase effects can then overwhelm the basic nanoparticle influence and lead to higher stiffnesses for all configurations of nanotube composites. These simple yet insightful comparisons may provide guidance in the design of nanocomposites.

Room temperature fast synthesis of zinc oxide nanowires by inductive heating

ZnO nanowires have been rapidly synthesized using inductive heating in a room temperature environment. Nanowires with random and aligned orientations were grown on silicon and 4H-SiC (0001) substrates in less than 5min, respectively, using ZnO/graphite as the solid source powder. Scanning electron microscopy showed nanowire diameters of 20–120nm and lengths up to 5μm, and transmission electron microscopy verified the single-crystalline lattice of the nanowires. Electrical properties were studied by connecting a single ZnO nanowire in the field-effect transistor configuration. This demonstration further illustrates the feasibility of a simple and fast nanoscale synthesis using inductive heating for nanomaterial synthesis.

Near-force-balanced machining by finite element modelling

A near force-balanced approach to machining is proposed to reduce the deterioration of part quality during the machining process, by proposing active/passive tools (supports) cutting simultaneously in aligned or offset orientations. Finite Element Modelling is used to prove the feasibility of this idea by considering a hollow cylinder that is fixed at one end to represent a turning process of a workpiece clamped in a chuck. Weakening the material property by scaling the value of Young's modulus is selected as the material removal technique and also to represent the passive tools movement. Experimental validation of this concept in a twin turning machine (CNC) is underway.

Ion transmission and characterization of ordered nanoporous alumina

Ordered nanoporous alumina samples with a pore diameter of 70 nm, an array period of 100 nm and several thicknesses were considered as possible masks for pattern transfer by MeV ion lithography. A simple procedure for the sample alignment using a 2 MeV He + beam was utilized. The energy distributions of transmitted ions as well as backscattering spectra were studied in aligned and non-aligned orientations. The best transmission, comparable to the relative surface area covered by pores, was reached for 2 μm thick samples and was independent on ion species. Although the transmission for thicker membranes was generally lower, it significantly depended on the quality of each individual sample. The presented ion beam technique can therefore be used as a tool for the characterization of porous materials. The acceptance angle for transmission through pores and the effective atomic density of samples can be obtained from the experimental data and it is shown that nanoporous alumina can be used as a mask for MeV ion lithography.

Effects of structure and ion irradiation on the exchange field of NiFe/NiMn

NiFe/NiMn exchange field was manipulated by an underlayer NiFeCr or by C ion irradiation. Underlayer NiFeCr significantly promoted (1 1 1) texture growth, leading to a higher exchange field. However, the threshold annealing temperature required to reach a large value of exchange field was raised. This can be attributed to well aligned orientations between NiFe and NiMn at the interface, which stabilizes the FCC γ phase of NiMn and increases the nucleation energy. C ion irradiation with the dosage of 3.7×10 15/cm 2 prior to the annealing increases the exchange field by 21% without altering the blocking temperature (>400°C). The enhancement of the exchange field by irradiation can be related to the increase of defect sites in NiMn or (and) to the new phase NiMn(C) formation having c/a ratio significantly less than NiMn.