Crystal Alignment Research Articles

Low-voltage and high-contrast polymer dispersed liquid crystals enabled by ferroelectric fluoro-copolymer doped polyimide film

Smart windows incorporating polymer dispersed liquid crystal (PDLC) technology provide user-friendly operation and play a significant role in intelligent buildings and building energy conservation. Long standing issues of the PDLCs such as high driving voltage, low contrast ratio, and narrow viewing angle hinder their applications. Here PDLCs are sandwiched between the hybrid substrates composed of the ferroelectric polyvinylidene fluoride trifluoroethylene (P(VDF-TrFE)) copolymer and the homogeneous polyimide. The high dielectric constant and ion-trapping ability of ferroelectric copolymers increase the effective voltage drop in the PDLCs. Concurrently, the local electric field created by large dipole moment of ferroelectric copolymers triggers the alignment of liquid crystals (LCs) along the applied field. These synergistic effects contribute to a substantial decrease in the driving voltage of PDLCs. In the opaque state, the random dipole moments in ferroelectric copolymers disrupt the LC orientations near hybrid substrates, thereby increasing the light scattering and reducing the transmission of PDLCs. Consequently, the proposed PDLCs exhibit a contrast ratio ∼2× higher compared to the conventional PDLCs at normal incident. Moreover, the proposed PDLCs demonstrate a wider viewing angle in the transparent state compared to conventional PDLCs. This development promises energy-efficient, eco-friendly, and cost-effective smart windows.

Investigating the impact of crystal face on SnO2/GO-A humidity sensor via adsorption kinetics and DFT calculations

Ranging from monitoring indoor air quality to controlling processes in the food, pharmaceutical, and electronics industries, humidity-sensitive sensors play a pivotal role in various industrial and environmental applications. The crystallographic orientation of their surfaces is one of the key factors influencing the performance of metal oxide-based humidity sensors. However, the study of different crystal faces of metal oxides is rarely discussed, such as surface energy, charge distribution and reactivity, which can significantly affect their water absorption behavior and thus affect the sensitivity and response time of the humidity sensor. Hence, the present study introduces a meticulously designed SnO2/GO-A sensor that not only validates the successful fabrication of SnO2/GO-A sensor featuring optimized crystal alignment but also delves into the intricate water absorption mechanisms operative across various SnO2 crystal faces. The First-principles results show that (110) face of SnO2 is more sensitive to the water molecule than others. Consequently, due to the (110) crystal surface growth with annealing process, the SnO2/GO-A sensor demonstrates significant performance enhancements, especially in response speed, recovery time, linearity, and repeatability. In particular, the SnO2/GO-A sensor exhibiting faster response and recovery times of 20s and 18s, respectively, which is higher than SnO2 and SnO2/GO sensor. This advantage makes SnO2/GO-A sensor a potential candidate for humidity sensing applications.

Review of Angular-Selective Windows with Guest–Host Liquid Crystals for Static Window Applications

This review focuses on the development and advancements in angular-selective smart windows, with particular emphasis on static windows utilizing guest–host liquid crystal (GHLC) systems. Angular-selective windows are designed to adjust their transmittance based on the angle of incident light, offering enhanced energy efficiency and visual comfort in both architectural and automotive applications. By leveraging the anisotropic absorption properties of dichroic dyes, GHLC-based windows can selectively block oblique sunlight while preserving clear visibility from normal viewing angles. Various liquid crystal (LC) alignment configurations, including vertically aligned, homogeneously aligned, hybrid aligned, uniformly lying helix, and twisted aligned LC cells, have been investigated to optimize light control for different installation angles, such as for automotive windshields and building windows. These advancements have demonstrated significant improvements in energy conservation and occupant comfort by reducing cooling demands and regulating sunlight penetration. This review summarizes key findings from recent studies, addresses the limitations of current technologies, and outlines potential future directions for further advancements in smart window technology.

Vertically oriented low-dimensional perovskites for high-efficiency wide band gap perovskite solar cells.

Controlling crystal growth alignment in low-dimensional perovskites (LDPs) for solar cells has been a persistent challenge, especially for low-n LDPs (n < 3, n is the number of octahedral sheets) with wide band gaps (>1.7 eV) impeding charge flow. Here we overcome such transport limits by inducing vertical crystal growth through the addition of chlorine to the precursor solution. In contrast to 3D halide perovskites (APbX3), we find that Cl substitutes I in the equatorial position of the unit cell, inducing a vertical strain in the perovskite octahedra, and is critical for initiating vertical growth. Atomistic modelling demonstrates the thermodynamic stability and miscibility of Cl/I structures indicating the preferential arrangement for Cl-incorporation at I-sites. Vertical alignment persists at the solar cell level, giving rise to a record 9.4% power conversion efficiency with a 1.4 V open circuit voltage, the highest reported for a 2 eV wide band gap device. This study demonstrates an atomic-level understanding of crystal tunability in low-n LDPs and unlocks new device possibilities for smart solar facades and indoor energy generation.

Enhanced sensitivity in tobramycin monitoring using a surfactant-aligned liquid crystal aptasensor with a ternary hybrid aptamer

Determining pharmaceutical residues in foodstuffs is of great importance worldwide. The improper use of tobramycin (TOB) with abroad spectrum antibacterial activity results in its accumulation in the food chain and human body. Given its detrimental effects on human health, the careful surveillance of TOB concentrations is essential to ensure food safety. Presented here is a highly sensitive aptasensing array designed to measure the TOB concentration by disrupting the alignment of liquid crystal (LC) molecules induced by surfactants. For the first time, a ternary hybrid of the aptamer strands was incorporated onto the surfactant-designed LC-aqueous interface instead of a single strand of aptamer, causing a significant disruption in the customary orientation of LCs. This changed the brightness quantity from 35.06 to 69.54, due to higher interaction with the positively charged section of the surfactant than that for one aptamer strand. The presence of TOB caused the ternary aptamer hybrid to break apart by creating the complex between the aptamer and TOB, separating the aptamer strands from the LC-aqueous interface. Subsequently, the TOB presence was specified by inducing a color change in the polarized vision of the aptasensor platform, resulting in a shift from colorful to murky. The aptasensor could monitor TOB in the linear concentration range of 1 fM-10 nM, with an impressively low detection limit of 0.217 fM. With the capability to determine TOB in beef, chicken egg, and low-fat milk, the LC-decorated aptasensor is proficient in food quality control. The aptasensor possesses characteristics such as simplicity, high sensitivity, ease of use, and affordability. As a result, it has the potential to be marketed as a portable testing kit that is convenient and cost-effective.

Physical and electrochemical performances of novel tellurium composite films as anode applications in energy storage systems

Portable electronic devices and electric cars use lithium-ion batteries, but clumping lithium alloys limit their lifespan. Due to their strong electronic conductivity, volumetric capacity, and high energy density, researchers are conducting research on electrochemical metal cells utilizing tellurium for high-performance batteries. Theoretically, lithium-tellurium batteries can improve energy densities three times more than lithium-ion batteries. However, metal-tellurium faces challenges such as low rate capability, unclear redox reactions, intermediate dissolution, and electrode volume changes. This study explores the enhancement of the energy storage capacity of next-generation batteries by fabricating coated electrode films as novel anodes from tellurium, silicon, and graphene. Physical, thermal, and morphological analysis of composite material are investigated by XRD, TEM, TGA, DSC, SEM, UV, and XPS analyses, revealing its rigidity as well as durability through its crystal structure alignment and thermal stability. In electrochemical analysis (CV) at various scan rates, samples that exhibit consistent and high specific capacity (Cp) values at different scan speeds (25, 50, and 100 mV/s) indicate excellent ability to store and maintain charge. Decreasing Cp values with increasing scan rates indicate that the speed of cycling limits the charge transfer kinetics and electrode performance. In EIS, the charge transfer resistances (Rct) for the pure Te, Te + Gr, Te + Si + Gr, and Te + Si samples are 759.07 Ω, 4.21 Ω, 36.39 Ω, and 164.90 Ω, respectively. The Te + Gr sample has the lowest Rct, indicating the best charge transfer efficiency at the electrode contact, whereas the Te + Si + Gr sample has a comparatively lower Rct, indicating better charge transfer kinetics. The combined result exhibits the synergistic impact of tellurium, silicon, and graphene in enhancing the energy storage capacity of future batteries across the industry.

Fractional Talbot Lithography for Predesigned Large-Area Liquid-Crystal Alignment

To address the increasing demands for cost-effective, large-area, and precisely patterned alignment of liquid crystals, a fractional Talbot lithography alignment technique was proposed. A light intensity distribution with a double spatial frequency of a photomask could be achieved based on the fractional Talbot effect, which not only enhanced the resolution of lithography but also slashed system costs with remarkable efficiency. To verify the feasibility of the alignment method, we prepared a one-dimensional polymer grating as an alignment layer. A uniform alignment over a large area was achieved thanks to the perfect periodicity and groove depth of several hundred nanometers. The anchoring energy of the alignment layer was 1.82 × 10−4 J/m2, measured using the twist balance method, which surpassed that of conventional rubbing alignment. Furthermore, to demonstrate its ability for non-uniform alignment, we prepared polymer concentric rings as an alignment layer, resulting in a liquid-crystal q-plate with q = 1 and α0 = π/2. This device, with a wide tuning range (phase retardation of ~6π @ 633 nm for 0 to 5 V), was used to generate special optical fields. The results demonstrate that this approach allows for the uniform large-area orientation of liquid-crystal molecules with superior anchoring energy and customizable patterned alignment, which has extensive application value in liquid-crystal displays, generating special optical fields and intricate liquid-crystal topological defects over a large area.

Epoxy resin-based polymer-wall stabilized liquid crystal films with low driving voltages and improved mechanical performance for smart window applications

Polymer stabilized liquid crystals (PSLCs) have wide applications in smart windows and light shutters. However, for most applications, it requires low driving voltages and high mechanical performance, which is arduous to achieve both. Herein, a novel epoxy resin-based PSLC device is prepared showing improved electro-optical and mechanical properties simultaneously. This is benefited from the construction of a period polymer wall structure in liquid crystal matrix through cationic polymerization of epoxy monomers and preparation of multi-functional surfaces through self-assembly of silane mixtures. The multi-functional surfaces could ensure homeotropic alignment of liquid crystals and photo-polymerize with the polymer networks. As a result, the polymer-wall stabilized liqduid crystal (PWSLC) film with multi-functional surfaces shows lower (24%) saturation voltage, higher (20%) contrast ratio and improved (2.4 times) peel strength than the PSLC film with only vertical alignment surfaces. This research provides important reference to experiment and manufacture of reverse-mode dimming films for smart windows applications.

Nanogroove-structured Indium Bismuth Oxide Film for Homogeneous Liquid Crystal Alignment Achieved by Brush Coating

Nanogroove-structured Indium Bismuth Oxide Film for Homogeneous Liquid Crystal Alignment Achieved by Brush Coating

Regulation of Skeletal Development and Maintenance by Runx2 and Sp7.

Runx2 (runt related transcription factor 2) and Sp7 (Sp7 transcription factor 7) are crucial transcription factors for bone development. The cotranscription factor Cbfb (core binding factor beta), which enhances the DNA-binding capacity of Runx2 and stabilizes the Runx2 protein, is necessary for bone development. Runx2 is essential for chondrocyte maturation, and Sp7 is partly involved. Runx2 induces the commitment of multipotent mesenchymal cells to osteoblast lineage cells and enhances the proliferation of osteoprogenitors. Reciprocal regulation between Runx2 and the Hedgehog, fibroblast growth factor (Fgf), Wnt, and parathyroid hormone-like hormone (Pthlh) signaling pathways and Dlx5 (distal-less homeobox 5) plays an important role in these processes. The induction of Fgfr2 (Fgf receptor 2) and Fgfr3 expression by Runx2 is important for the proliferation of osteoblast lineage cells. Runx2 induces Sp7 expression, and Runx2+ osteoprogenitors become Runx2+Sp7+ preosteoblasts. Sp7 induces the differentiation of preosteoblasts into osteoblasts without enhancing their proliferation. In osteoblasts, Runx2 is required for bone formation by inducing the expression of major bone matrix protein genes, including Col1a1 (collagen type I alpha 1), Col1a2, Spp1 (secreted phosphoprotein 1), Ibsp (integrin binding sialoprotein), and Bglap (bone gamma carboxyglutamate protein)/Bglap2. Bglap/Bglap2 (osteocalcin) regulates the alignment of apatite crystals parallel to collagen fibrils but does not function as a hormone that regulates glucose metabolism, testosterone synthesis, and muscle mass. Sp7 is also involved in Co1a1 expression and regulates osteoblast/osteocyte process formation, which is necessary for the survival of osteocytes and the prevention of cortical porosity. SP7 mutations cause osteogenesis imperfecta in rare cases. Runx2 is an important pathogenic factor, while Runx1, Runx3, and Cbfb are protective factors in osteoarthritis development.

Oriented Alignment of CsPbBr3 Single-Crystal Arrays for Flexible X-ray Imaging.

The utilization of perovskite materials in flexible optoelectronics is experiencing distinct diversification including X-ray detection applications. Here, we report the oriented alignment of cesium lead bromide (CsPbBr3) single-crystal arrays on flexible polydimethylsiloxane (PDMS) substrates. By precisely confining the crystallization process within spatially delimited precursor droplets, we achieve a well-oriented crystal alignment through the spontaneous rotation of the CsPbBr3 microcuboids. This approach allows for precise control over the microcuboid morphologies by varying the growth temperature. We design flexible X-ray detector arrays by seamlessly integrating CsPbBr3 microcuboids with electrode arrays. The flexible X-ray detector can output a high sensitivity of 1.97 × 105 μC·Gyair-1·cm-2 and a low detection limit of 89 nGyair·s-1 after the surface passivation process. The excellent mechanical properties, outstanding X-ray detection capabilities, and high pixel uniformity are also demonstrated in conformal X-ray imaging of curved surfaces.

Effect of Anisotropy on Lithium Dendrite Growth

Lithium dendrite formation is one of the leading causes of performance degradation and safety hazards in lithium batteries. Understanding dendrite evolution and its morphology during cycling can provide the critical insight into improving battery performance and safety. Recent experimental studies with cryo-electron microscopy have revealed anisotropic morphologies of lithium metal during deposition. Lithium, being a crystalline material, exhibits different surface energies and reaction rates depending on the crystal surfaces. In this study, we apply a quantitative electrochemical phase-field model to study the impact of thermodynamic and kinetic anisotropy on lithium morphology during battery cycling. We examine scenarios involving the alignment or misalignment of lithium crystals with the applied current. We observe that due to the rapid deposition rates, lithium dendrites tend to grow along crystal directions with high kinetics, resulting in a needle-like morphology. Furthermore, we study the effect of anisotropy magnitude on morphology selection, as well as the interaction between neighboring dendrites during cycling and the effect of various factors, including the applied current and electrolyte properties. Overall, this study elucidates the relationship between lithium dendrite morphology and various factors, ultimately contributing to the development of improved batteries with enhanced performance and safety.

Morphology Controled LiFePO4 Electrodes Via Polyol Refluxing for Enhanced Lithium-Ion Battery Performance

In the synthesis of LiFePO4 cathodes with secondary nanorod structures and nano-plate morphologies, researchers utilized a polyol refluxing process. Notably, we achieved this without the use of characteristic structure directing agents. Through varying the reaction time, they were able to modulate the morphological characteristics of the synthesized samples.X-ray diffraction studies conducted on the prepared samples indicated a highly crystalline nature. This suggests that the synthesized cathodes possessed a robust and ordered atomic structure, which is crucial for their electrochemical performance.Electron microscopy investigations provided insights into the morphology of the samples obtained at different reaction times. Samples produced after 1 to 16 hours of polyol reaction exhibited secondary nanorod bundles. However, the sample recovered after 32 hours of polyol reaction displayed a distinct nano-plate morphology. These observations highlight the influence of reaction time on the final morphology of the synthesized cathodes.The dimensions of the obtained samples ranged from a few tens to a few hundred nanometers. This nano-scale size is advantageous for enhancing the electrode's surface area, which can facilitate rapid ion diffusion and electron transport during battery cycling.When employed in lithium test cells, the LiFePO4 cathodes synthesized for different durations delivered varying discharge capacities. Specifically, cathodes prepared under 1, 4, 8, 16, and 32 hours of reaction time exhibited discharge capacities of 161, 162, 171, 143, and 155 mAhg−1, respectively. Notably, all samples displayed a well-defined discharge plateau at 3.4 V, indicating stable electrochemical behavior during cycling.Remarkably, among the prepared electrodes, the LiFePO4 nanorod bundle cathode synthesized under 1 hour reaction time demonstrated the highest average reversible capacities. It maintained capacities of 123 and 103 mAhg−1 at C-rates as high as 3.2 and 6.4 C, respectively. This highlights the importance of reaction time in controlling the electrochemical performance of the synthesized cathodes.The crystal growth mechanism during the polyol refluxing method can be elucidated through several stages. These include precursor dissolution and nucleation, oriented crystal growth and alignment through self-assembly, aggregation, partial dissolution, and finally, complete re-crystallization. Understanding these mechanisms is essential for optimizing the synthesis process and tailoring the properties of LiFePO4 cathodes for various applications. Tarascon JM, Armand M. Issues and challenges facing rechargeable lithium batteries. Nature 2001;414:359–67Amatucci GG, Tarascon JM, Klein LC. CoO2, the end member of the LixCoO2 solid solution. J Electrochem Soc 1996;143:1114–23Ravet N, Chouinard Y, Magnan JF, Besner S, Gauthier M, Armand M. Electroactivity of natural and synthetic triphylite. J Power Sources 2001;97–98:503–7 Figure 1

The effects of side-chain flexibility on the photosensitivity of polyimide alignment film

ABSTRACT To examine the impact of side-chain flexibility on the photosensitivity of polyimide liquid crystal (LC) alignment films, two polyimides (OD-HAB-CA and OD-HAB6-CA) were synthesised. OD-HAB6-CA contains flexible hexamethylene side chains. This study demonstrates that the OD-HAB-CA alignment film can induce LC molecular alignment after 80 min of non-polarised ultraviolet light (NPUVL) irradiation. In contrast, the OD-HAB6-CA alignment film can achieve the same result after only 35 min of irradiation. This suggests that the flexibility of the side-chain can significantly improve the photosensitivity of the alignment film and shorten the required irradiation time. In addition, OD-HAB-CA and OD-HAB6-CA exhibit good thermal stability and light transmittance properties. The resulting LC cell have pretilt angles of 0.2° and 0.5°, respectively, which are suitable for in-plane switching mode LCDs.

Physicochemical Methods for the Structuring and Assembly of MOF Crystals.

ConspectusMetal-organic frameworks (MOFs) are promising for various applications through the creation of innovative materials and assemblies. This potential stems from their modular nature, as diverse metal ions and organic linkers can be combined to produce MOFs with unique chemical properties and lattice structures. Following extensive research on the design and postsynthetic chemical modification of MOF lattices at the molecular level, increasing attention is now focused on the next hierarchical level: controlling the morphology of MOF crystals and their subsequent assembly and positioning to create functional composites.Beyond well-established methods to regulate crystal size and shape through nucleation and coordination modulation, physicochemical techniques leveraging wetting effects, interparticle interactions, and magnetic or electric fields offer attractive avenues for the hierarchical structuring and assembly of MOFs. These techniques facilitate crystal alignment and yield unique superstructures. While our research group primarily focuses on directing MOF crystal orientation and positioning using external stimuli such as magnetic and electric fields, we also explore hierarchical MOF synthesis and structuring using liquid interfaces and depletion force-assisted packing.This account highlights our journey and progress in developing methods to regulate the morphology, assembly, orientation, and positioning of MOF crystals, placed in the context of work by other groups. First, we examine commonly utilized structuring methods for MOF crystals that employ liquid-liquid and air-liquid interfaces to spatially confine reactions, allowing us to access unique morphologies such as mushroom-like crystals and Janus particles. We also discuss strategies for concentrating and packing MOF crystals into superstructures, utilizing fluid interfaces for spatial confinement of crystals, depletion forces, entropic effects, and crystal sedimentation.A particularly compelling challenge in expanding the applicability of MOF materials is how to manipulate free-standing MOF crystals. This issue is especially important because MOFs are typically produced as loose powders, and industrial material processing is generally more efficient when the material is fluidized. While extensive research has been conducted regarding MOF growth on substrates with both positional and orientational control, there is a clear need for similar precision with free-standing MOFs dispersed in a fluid matrix. Our group has thus focused on the relatively new, yet powerful approach of using electric and magnetic fields to manipulate MOF crystals, which offers unprecedented control over the orientation and positioning of dispersed MOF crystals, complementing the more well-established methods of MOF growth on substrates. In this Account, we provide foundational background and discussions on the interactions between these external fields and MOF crystals, including critical considerations for effective MOF manipulation using such techniques. We also discuss their unique advantages and applications, and briefly examine potential application areas, such as photonics, smart materials like soft robotics and absorbents, and sensing. This Account highlights the promising potential of well-organized and aligned MOF crystals over randomly oriented ones in various applications, owing to enhanced selectivity and performance. It underscores the importance of specialized assembly methods to advance materials science and engineering, encouraging the reader to explore such approaches.

Using a Flexible Fountain Pen to Directly Write Organic Semiconductor Patterns with Crystallization Regulated by the Precursor Film.

Organic semiconductor (OSC) films fabricated by meniscus-guided coating (MGC) methods are suitable for cost-effective and flexible electronics. However, achieving crystalline thin films by MGC methods is still challenging because the nucleation and crystal growth processes are influenced by the intertwined interactions among solvent evaporation, stochastic nucleation, and the fluid flow instabilities. Herein, a novel flexible fountain pen with active ink supply is designed and used to print OSCs. This direct-write method allows the flexible pen tip to contact the substrate, maintaining a robust meniscus by eliminating the gap found in conventional MGCs. An in situ optical microscopy observation system shows that the precursor film plays a critical role on the crystallization and the formation of coffee rings and dendrites. The computational fluid dynamics simulations demonstrate that the microstructure of the pen promotes extensional flows, facilitating mass transport and crystal alignment. Highly-aligned ribbon-shaped crystals of a small organic molecule (TIPS-pentacene), as well as a semiconducting polymer (N2200) with highly-ordered orientations, have been successfully printed by the flexible fountain pen. Organic field-effect transistors based on the flexible pen printed OSCs exhibit high performances and strong anisotropic mobility. In addition, the flexible fountain pen is expandable for printing multiple lines or large-area films.

Nano/microgroove zirconium‐doped lanthanum oxide film with self‐aligned molecules for liquid crystal device application

Herein, we propose a brush‐coated zirconium‐doped lanthanum oxide (ZrLaO) film as a liquid crystal (LC) alignment layer. The film‐curing temperature was adjusted to 70, 150, and 230°C. Polarized optical microscopy and pre‐tilt angle analysis confirmed that there was uniform and homogeneous LC alignment on the 230°C cured ZrLaO film. Atomic force microscopy revealed that the surface had a nano/microgroove structure, which was caused by the shear stress generated by the brush‐coating process. This structure induced the uniform LC alignment. X‐ray photoelectron spectroscopy verified that the ZrLaO film was well‐formed on a glass substrate. The ZrLaO film displayed hydrophilic characteristics, and its surface energy increased as the film‐curing temperature increased. The ZrLaO alignment layer displayed suitable optical transmittance for LC device applications. The ZrLaO layer‐based twisted‐nematic LC cell exhibited more stable switching properties and better threshold voltage characteristics than conventional polyimide layers. Therefore, we expect that this brush‐coated ZrLaO layer will be a suitable LC alignment layer for LC device applications.

Identifying Optimal Processing Variables and Investigating Mechanisms of Grain Alignment in Hot-Deformed NdFeB Magnets through Design of Experiments.

This study introduces a novel approach for investigating hot-deformed NdFeB magnets by combining the minimal stress deformation process (MSDP) with the design of experiment (DoE) methodology. This study focused on enhancing the crystallographic alignment, particularly the c-axis alignment of the Nd2Fe14B grains, to optimize the magnetic properties. By utilizing the Box-Behnken design matrix and response surface regression, critical processes and variables were identified, determining that a hot-pressing temperature of 700 °C is crucial for achieving optimal grain alignment. Changing the strain rate to 0.019 mm/s under a stress of 110 MPa led to significant enhancements in the alignment, yielding magnets with a remanence of approximately 13.4 kG and a coercivity of 21 kOe. These findings highlight the effectiveness of combining the MSDP and DoE for predicting and achieving improved magnetic properties. Despite the challenges associated with understanding the complexity of crystal alignment mechanisms, this integrated approach successfully improved magnetic characteristics. The methodology represents a significant advancement in the fabrication of high-performance hot-deformed NdFeB magnets, marking a notable contribution to the field.

On the Feasibility of an LCD-Based Real-Time Converter for Ionizing Radiation Imaging.

Here we present the cascade converter (CC), which provides real-time imaging of ionizing radiation (IoR) distribution. It was designed and manufactured with the simplest architecture, utilizing liquid crystal display (LCD) technology. Based on two merged substrates with transparent electrodes, armed with functional layers, with the cell filled with nematic liquid crystal, a display-like, IoR-stimulated CC was achieved. The CC comprises low-absorbing polymer substrates (made of polyethylene terephthalate-PET) armed with a transparent ITO electrode covered with a thin semipermeable membrane of polymer (biphenylperfluorocyclobutyl: BP-PFCB) doped with functional nanoparticles (NPs) of Lu2O3:Eu. This stack was covered with a photoconductive layer of α-Se and finally with a thin polyimide (PI) layer for liquid crystal alignment. The opposite substrate was made of LCD-type glass with ITO and polyimide aligning layers. Both substrates form a cell with a twisted structure of nematic liquid crystal (TN) driven with an effective electric field Eeff. An effective electric field driving TN structure is generated with a sum of (1) a bias voltage VBIAS applied to ITO transparent electrodes and (2) the photogenerated additional voltage VXray induced between ITO and α-Se layers with a NPs-doped BP-PFCB polymer layer in-between. The IoR (here, X-ray) conversion into real imaging of the IoR distribution was achieved in the following stages: (1) conversion of IoR distribution into non-ionizing red light emitted with functional NPs, (2) transformation of red light into an electric charge distributed in a layer of the photoconductive α-Se, which is what results in the generation of distributed voltage VXray, and (3) a voltage-mediated, distributed switching of the TN structure observed with the naked eye. The presented imaging device is characterized by a simple structure and a simple manufacturing process, with the potential for use as a portable element of IoR detection and as a dosimeter.

Alignment of lyotropic liquid crystals using magnetic nanoparticles improves ionic transport through built-in peptide ion channels

Hypothesis: We hypothesize that simultaneous incorporation of ion channel peptides (in this case, potassium channel as a model) and hydrophobic magnetite Fe3O4 nanoparticles (hFe3O4NPs) within lipidic hexagonal mesophases, and aligning them using an external magnetic field can significantly enhance ion transport through lipid membranes.Experiments: In this study, we successfully characterized the incorporation of gramicidin membrane ion channels and hFe3O4NPs in the lipidic hexagonal structure using SAXS and cryo-TEM methods. Additionally, we thoroughly investigated the conductive characteristics of freestanding films of lipidic hexagonal mesophases, both with and without gramicidin potassium channels, utilizing a range of electrochemical techniques, including impedance spectroscopy, normal pulse voltammetry, and chronoamperometry.Findings: Our research reveals a state-of-the-art breakthrough in enhancing ion transport in lyotropic liquid crystals as matrices for integral proteins and peptides. We demonstrate the remarkable efficacy of membranes composed of hexagonal lipid mesophases embedded with K+ transporting peptides. This enhancement is achieved through doping with hFe3O4NPs and exposure to a magnetic field. We investigate the intricate interplay between the conductive properties of the lipidic hexagonal structure, hFe3O4NPs, gramicidin incorporation, and the influence of Ca2+ on K+ channels. Furthermore, our study unveils a new direction in ion channel studies and biomimetic membrane investigations, presenting a versatile model for biomimetic membranes with unprecedented ion transport capabilities under an appropriately oriented magnetic field. These findings hold promise for advancing membrane technology and various biotechnological and biomedical applications of membrane proteins.