Algorithm Optimization Technique Research Articles

Sediment load forecasting from a biomimetic optimization perspective: Firefly and Artificial Bee Colony algorithms empowered neural network modeling in Çoruh River

AbstractThe service life of downstream dams, river hydraulics, waterworks construction, and reservoir management is significantly affected by the amount of sediment load (SL). This study combined models such as the artificial neural network (ANN) algorithm with the Firefly algorithm (FA) and Artificial Bee Colony (ABC) optimization techniques for the estimation of monthly SL values in the Çoruh River in Northeastern Turkey. The estimation of SL values was achieved using inputs of previous SL and streamflow values provided to the models. Various statistical metrics were used to evaluate the accuracy of the established hybrid and stand-alone models. The hybrid model is a novel approach for estimating sediment load based on various input variables. The results of the analysis determined that the ABC-ANN hybrid approach outperformed others in SL estimation. In this study, two combinations, M1 and M2, with different input variables, were used to assess the model's accuracy, and the best-performing model for monthly SL estimation was identified. Two scenarios, Q(t) and Q(t − 1), were coupled with the ABC-ANN algorithm, resulting in a highly effective hybrid approach with the best accuracy results (R2 = 0.90, RMSE = 1406.730, MAE = 769.545, MAPE = 5.861, MBE = − 251.090, Bias Factor = − 4.457, and KGE = 0.737) compared to other models. Furthermore, the utilization of FA and ABC optimization techniques facilitated the optimization of the ANN model parameters. The significant results demonstrated that the optimization and hybrid techniques provided the most effective outcomes in forecasting SL for both combination scenarios. As a result, the prediction outputs achieved higher accuracy than those of a stand-alone ANN model. The findings of this study can provide essential resources to various managers and policymakers for the management of water resources.

Experimental Investigations and Optimization of Surface Roughness Using Response Surface Methodology Coupled with Genetic Algorithm and Particle Swarm Optimization Techniques in Grinding of Inconel 718

Experimental Investigations and Optimization of Surface Roughness Using Response Surface Methodology Coupled with Genetic Algorithm and Particle Swarm Optimization Techniques in Grinding of Inconel 718

Borehole Breakout Prediction Based on Multi-Output Machine Learning Models Using the Walrus Optimization Algorithm

Borehole breakouts significantly influence drilling operations’ efficiency and economics. Accurate evaluation of breakout size (angle and depth) can enhance drilling strategies and hold potential for in situ stress magnitude inversion. In this study, borehole breakout size is approached as a complex nonlinear problem with multiple inputs and outputs. Three hybrid multi-output models, integrating commonly used machine learning algorithms (artificial neural networks ANN, random forests RF, and Boost) with the Walrus optimization algorithm (WAOA) optimization techniques, are developed. Input features are determined through literature research (friction angle, cohesion, rock modulus, Poisson’s ratio, mud pressure, borehole radius, in situ stress), and 501 related datasets are collected to construct the borehole breakout size dataset. Model performance is assessed using the Pearson Correlation Coefficient (R2), Mean Absolute Error (MAE), Variance Accounted For (VAF), and Root Mean Squared Error (RMSE). Results indicate that WAOA-ANN exhibits excellent and stable prediction performance, particularly on the test set, outperforming the single-output ANN model. Additionally, SHAP sensitivity analysis conducted on the WAOA-ANN model reveals that maximum horizontal principal stress (σH) is the most influential parameter in predicting both the angle and depth of borehole breakout. Combining the results of the studies and analyses conducted, WAOA-ANN is considered to be an effective hybrid multi-output model in the prediction of borehole breakout size.

Establishing a unified viscoplastic constitutive equation for EA4T steel: Comparative analysis with Arrhenius model

Quasi-static and impact compression experiments were conducted on EA4T steel using a Gleeble-3800 thermal simulation machine. The study aimed to investigate the complex microstructural evolution and thermal deformation behavior of EA4T steel under various experimental conditions, including temperatures ranging from 970 °C to 1170 °C and strain rates ranging from 0.01s−1 to 1s−1. To precisely elucidate these phenomena, we meticulously constructed a unified visco-plastic constitutive model using the internal variable methodology. The model's parameterization was achieved through the effective application of genetic algorithm optimization techniques. Rigorous validation of the model was performed by meticulously comparing its outputs with experimental data, including key metrics such as average grain size, recrystallized fraction, and effective flow stress. In addition,a comparative analysis with the improved Arrhenius model highlights the superior performance of the unified visco-plastic constitutive equation in capturing the intricate microstructural evolution and thermal deformation behavior exhibited by EA4T steel.

Optimizing capacitor size and placement in radial distribution networks for maximum efficiency

As distribution systems continue to expand, they face challenges such as increased system losses and inadequate voltage regulation. To address these issues, shunt capacitors are being deployed in distribution networks. These capacitors offer reactive power compensation, enhance power factor, improve voltage profiles, promote system stability, and significantly reduce losses. However, determining the appropriate capacitor sizes and their optimal placements requires careful consideration of both technical and economic factors. The nonlinear nature of optimal capacitor placement and sizing, leveraging optimization techniques becomes crucial in identifying the best locations and values for capacitors. This paper demonstrates the effective utilization of Particle Swarm Optimization (PSO) and Real Coded Genetic Algorithm (RCGA) optimization techniques for capacitor placement and selection. The optimization techniques are applied to a 33-bus IEEE standard radial distribution system, to reduce the real power loss and to improve the voltage profile considering both constant and variable loads. Both PSO and RCGA algorithms identify suitable locations for the placement of capacitors for reactive power compensation within the distribution system. By optimizing the objective function associated with capacitor placement costs and maximizing annual cost savings, the PSO and RCGA techniques yield promising results. After implementing the optimal capacitor placements at the identified candidate nodes, a significant reduction in losses within the radial distribution system is observed. Moreover, the cost savings achieved through optimal placement and sizing are substantial.

ANOMALY DETECTION USING MODIFIED LINEARITY BASED GREY SWARM OPTIMIZATION ALGORITHM AND EFFICIENT HYPER PARAMETER OPTIMIZATION TECHNIQUES

Attacks and anomalies are quiet common in today’s technological world. However it is important to identify these anomalies as soon as possible since these anomalies can cause various problem. Therefore anomaly detection plays a vital role in detecting these outliers. Anomaly detection detects suspicious activity which fundamentally falls outside of the respected pattern of behaviour. Anomaly detection aims at identifying the unpredicted and unexpected events in data streams which are commonly referred to as anomalous events. Therefore proposed modified linearity based grey swarm algorithm and hyperparameter optimization techniques for improving the performance of the proposed model. Hyperparameter optimization techniques implemented in the proposed model are genetic algorithm (GA), Grid Search and Random Search. Feature selection is implemented in the proposed model is modified linearity based grey swarm algorithm since it has the ability to reduce the convergence. In addition to modified linearity based grey swarm algorithm, modified objective function is employed in the proposed model as it has the capability to find solutions to problems which are difficult to solve. Finally the performance of the proposed model is evaluated and assessed using various performance metrics such as accuracy, recall, precision and F1 score. At last, proposed model is compared with the existing models and found that proposed model outperformed other existing models.

Machine learning approach for the effectual production of a novel esterase and its application in bioremediation of dairy effluent

The present work intends to maximize the production of an industrially important novel esterase from Trichoderma harzianum using both machine learning and statistical approaches and its application in the bioremediation of dairy effluent. Significant medium compounds, such as almond oil, casein, NaH2PO4, and trace elements, were screened from a pool of carbon, nitrogen, oil and surfactant sources along with other micronutrients using a first order statistical design. The optimum value of screened parameters was found using response surface methodology that resulted in the maximum esterase production of 2985.31 U/L. Artificial neural network trained with the experimental response of RSM experiments coupled with genetic algorithm optimization technique has resulted in the maximum esterase production of 3256.73 U/L, which is 150-folds higher as compared to the unoptimized condition and also found to be the higher than the outcome of statistical optimization. Dairy effluent was used for the production of esterase as well as for its bioremediation. At 50% load, the maximum reduction in chemical oxygen demand and the production of esterase were observed to be 46.84% and 34.12 U/L, respectively. The COD reduction of diary effluent was modelled using Michaelis-Menten kinetics and the kinetic parameters, half saturation constant (Km) and maximum reaction rate (rmax) value were evaluated as 286.88 mg/L and 26.04 mg/L/d, respectively.

Using Improved Hybrid Grey Wolf Algorithm Based on Artificial Bee Colony Algorithm Onlooker and Scout Bee Operators for Solving Optimization Problems

Grey Wolf optimization (GWO) is a newly developed stochastic meta-heuristic technique motivated by nature. It shows potential in diverse optimization challenges. It replicates grey wolf hunting behaviour and social hierarchy, exploring the solution space similar to their natural process. The algorithm efficiently explores and converges to the optimal solution. However, a drawback of the standard GWO is its limited exploitation capability due to its exploration-focused iterations. This may hinder finding the optimal solution nearby, leading to lower local convergence rates and degraded solution quality. To address this, the GWO-Employed-Onlooker model suggests incorporating the onlooker and scout bee operators from the artificial bee colony algorithm (ABC) during the position-changing stage of the grey wolves. This enhances exploitation capability, resulting in improved local convergence rates and better solution quality. The proposed method’s performance is evaluated on various optimization functions and compared their convergence rate to standard GWO, Genetic Algorithm (GA), Firefly Algorithm (FA), ABC, and Ant Colony Optimization (ACO) techniques. The results demonstrate that the proposed strategy GWO-Employed-Onlooker is better, indicating that it is valuable in solving optimization problems.

A novel metaheuristic optimization and soft computing techniques for improved hydrological drought forecasting

Drought is one of the costliest natural disasters worldwide and weakens countries economically by causing negative impacts on hydropower and agricultural production. Therefore, it is necessary to create drought risk management plans by monitoring and predicting droughts. Various drought indicators have been developed to monitor droughts. This study aims to forecast Streamflow Drought Index (SDI) values with various novel metaheuristic optimization-based Artificial Neural Network (ANN) and deep learning models to predict 1-month lead-time hydrological droughts on 1, 3, and 12-month time scales in the Konya closed basin, one of the driest basins in Turkey. To achieve this goal, the ANN model was integrated with the Firefly Algorithm (FFA), Genetic Algorithm (GA), and Particle Swarm Optimization (PSO) techniques and compared against long short-term memory (LSTM) networks. While establishing the SDI prediction model, lag values exceeding the 95% confidence intervals in the partial autocorrelation function graphs were used. Model performance was evaluated according to scatter matrix, radar, time series, bee swarm graphs, and statistical performance metrics. As a result of the analysis, the PSO-ANN hybrid model with (R2:0.468–0.931) at station 1611 and the FFA-ANN hybrid model with (R2:0.443–0.916) at station 1612 generally have the highest accuracy.

Performance Analysis of Automatic Generation Control for a Multi-Area Interconnected System Using Genetic Algorithm and Particle Swarm Optimization Technique

The primary focus of this paper is to assess an interconnected power system using different optimization techniques. The main purpose is to employ different optimization techniques, including genetic algorithms (GA) and particle swarm optimization (PSO), to systematically enhance the performance of a multi-area or two-area automatic generation control (AGC) system, aiming to optimize the three PID controllers gain values and improve system performance under diverse loading conditions. Two case studies are conducted exploring different loading conditions in the megawatt (MW) range, including increasing load demand and decreasing load demand. The analysis involves four scenarios, covering without any kind of controller, another with solely a proportional integral derivative (PID) controller, a PID controller enhanced through a genetic algorithm (GA), and lastly, a PID controller improved through particle swarm optimization (PSO). The optimization process utilizes the integral time absolute error (ITAE) as the objective function to evaluate the system's performance. The simulation outcomes for ITAE, settling time, overshoot, and undershoot for frequency deviation of area one, area two, and power deviation in the tie-line are compared with previous similar studies to assess the novelty of this work. The article highlights the importance of the multi-area AGC system and the significance of different optimization techniques in improving its performance.

Self fuzzy-genetic approach for boosting photovoltaic efficiency

The generation of power in Photovoltaic systems is reduced when they operate far from their maximum power point. For optimal operation, it is essential to continuously track the maximum power point of the PV solar array. However, identifying the maximum power point is a challenge due to the nonlinear relationship of electrical characteristics of PV panels with external factors. To address this issue, we present a novel design approach for a self-organizing, self-tuning fuzzy logic controller, applied to the problem of maximum power point tracking in photovoltaic systems. We outline the basic structure of the fuzzy logic controller and address the design problems typically associated with conventional trial-and-error schemes. We also discuss the suitability of the genetic algorithm optimization technique for determining and optimizing the fuzzy logic controller design. In our proposed approach, we translate the normalization factors, membership function parameters, and controller policy into bit-strings, which are then processed by the genetic algorithm to find a near-optimal solution. To achieve high dynamic performance, we choose a particular objective function as a performance index. We compare our approach with two variants of the maximum power point algorithm, one based on genetic algorithms and the other based on fuzzy logic, as well as with the methods described in references [34] and [35], in order to evaluate its effectiveness.

Dividing‐wall column for separating wide boiling mixture: Optimal design and servo control strategy

AbstractThe dividing‐wall column (DWC) stands as an energy‐efficient distillation technology designed to efficiently separate ternary systems into their pure components within a single column. Despite its efficiency, integrating two towers into a DWC poses challenges in controllability. Published studies have focused on developing controllers for disturbance rejection but have not addressed the issue of servo control. Addressing this, our study proposes a servo controller problem and a methodical approach to strategically select controlled variables that undergo consecutive set point step changes, aiming to track the purity of key products obtained from the DWC. To achieve this goal, we developed a dynamic model specifically tailored to the DWC. Determining the design parameters involved employing a genetic algorithm optimization technique, minimizing the total annual cost. Subsequently, we implemented three servo parallel proportional‐integral (PI) feedback controllers for three distinct product streams. The fine‐tuning of their controller gain and reset time is carried out by minimizing the integrated square error while adhering to valve opening constraints. Our investigation revealed a limitation: the introduction of simultaneous step changes in all three controlled variables proved unfeasible with the three active PI controllers. As an alternative, our findings recommend prioritizing two variables: the lightest (distillate) and heaviest (bottom) key components, alongside the middle component (side stream) and either the lightest or heaviest key component. This research underscores the complexities of implementing step changes in multiple controlled variables within a DWC, offering insights into optimal control strategies for enhancing the efficiency of this innovative distillation technology.

Improved Decentralized Fractional-Order Control of Higher-Order Systems Using Modified Flower Pollination Optimization

Due to increased complexity and interactions between various subsystems, higher-order MIMO systems present difficulties in terms of stability and control performance. This study effort provides a novel, all-encompassing method for creating a decentralized fractional-order control technique for higher-order systems. Given the greater number of variables that needed to be optimized for fractional order control in higher-order, multi-input, multi-output systems, the modified flower pollination optimization algorithm (MFPOA) optimization technique was chosen due to its rapid convergence speed and minimal computational effort. The goal of the design is to improve control performance. Maximum overshoot (Mp), rising time (tr), and settling time (ts) are the performance factors taken into consideration. The MFPOA approach is used to improve the settings of the proposed decentralized fractional-order proportional-integral-derivative (FOPID) controller. By exploring the parameter space and converging on the best controller settings, the MFPOA examines the parameter space and satisfies the imposed constraints by maintaining system stability. To evaluate the suggested approach, simulation studies on two systems are carried out. The results show that by decreasing the loop interactions between subsystems with improved stability, the decentralized control with the MFPOA-based FOPID controller provides better control performance.

Optimal image 2D/3D by Krawtchouk moments and ABC algorithm

In our research, we provide an enhanced and effective Krawtchouk moments parameter p optimization approach using the Artificial Bee Colony (ABC) algorithm optimization technique for the purpose of completing tasks including the reconstruction and classification of 3D and 2D images with high quality. The proposed method, which uses the ABC algorithm to generate a suitable parameter based on Krawtchouck moments, aims to accurately characterize the image as a vector known as the descriptor vector of moments, which is then used to reconstruct the image for each order. The simulation and analysis of the findings demonstrate the high level of quality and effectiveness of the suggested KM-ABC approach for image reconstruction, as well as its excellent accuracy in images with and without noise.

Optimal performance of stand-alone hybrid microgrid systems based on integrated techno-economic-environmental energy management strategy using the grey wolf optimizer.

Recently, global interest in organizing the functioning of renewable energy resources (RES) through microgrids (MG) has developed, as a unique approach to tackle technical, economic, and environmental difficulties. This study proposes implementing a developed Distributable Resource Management strategy (DRMS) in hybrid Microgrid systems to reduce total net percent cost (TNPC), energy loss (Ploss), and gas emissions (GEM) while taking the cost-benefit index (CBI) and loss of power supply probability (LPSP) as operational constraints. Grey Wolf Optimizer (GWO) was utilized to find the optimal size of the hybrid Microgrid components and calculate the multi-objective function with and without the proposed management method. In addition, a detailed sensitivity analysis of numerous economic and technological parameters was performed to assess system performance. The proposed strategy reduced the system's total net present cost, power loss, and emissions by (1.06%), (8.69%), and (17.19%), respectively compared to normal operation. Firefly Algorithm (FA) and Particle Swarm Optimization (PSO) techniques were used to verify the results. This study gives a more detailed plan for evaluating the effectiveness of hybrid Microgrid systems from a technical, economic, and environmental perspective.

Optimal Reactive Power Dispatch problem integrating probabilistic model of wind power for uncertainties in load using JAYA algorithm

The optimal reactive power dispatch (ORPD) is a method for optimising power system engineering to reduce power loss and voltage deviation. This work addresses the ORPD problem considering load uncertainty, where load is varied in ten different instances. The optimal conditions have been determined for the system with minimum power loss and minimum total voltage deviations for different loading instances. The problem has also been integrated with the probabilistic nature of wind power, calculated using the Weibull Probability Distribution Function (WPDF). The aim is to obtain the optimal values of wind power using the WPDF for two separate cases: overestimation and underestimation, integrate these power individually, and minimise both the power loss and voltage deviation for the ten different loading scenarios. This hybrid wind power integrated ORPD problem, considering load uncertainty, has been tested on the IEEE 30 and IEEE 57 bus systems using the JAYA algorithm and other optimisation techniques. This tuning-parameter-free JAYA algorithm has obtained the best solutions for power loss of 1.8641 MW and TVD of 0.123 p.u. for the overestimated wind power integration at the IEEE 30 bus system at 100% loading compared to the other algorithms. It also acquired the best power loss and TVD solutions of 1.9144 MW and 0.1245 p.u., respectively, for the underestimated wind power at the same bus system for 100% loading with the highest convergence rate. The overall study establishes the JAYA algorithm as a superior optimising technique for solving this hybrid ORPD problem compared to the other techniques.

Dipper throated optimization with deep convolutional neural network-based crop classification for remote sensing image analysis.

With the rapid advancement of remote sensing technology is that the need for efficient and accurate crop classification methods has become increasingly important. This is due to the ever-growing demand for food security and environmental monitoring. Traditional crop classification methods have limitations in terms of accuracy and scalability, especially when dealing with large datasets of high-resolution remote sensing images. This study aims to develop a novel crop classification technique, named Dipper Throated Optimization with Deep Convolutional Neural Networks based Crop Classification (DTODCNN-CC) for analyzing remote sensing images. The objective is to achieve high classification accuracy for various food crops. The proposed DTODCNN-CC approach consists of the following key components. Deep convolutional neural network (DCNN) a GoogleNet architecture is employed to extract robust feature vectors from the remote sensing images. The Dipper throated optimization (DTO) optimizer is used for hyper parameter tuning of the GoogleNet model to achieve optimal feature extraction performance. Extreme Learning Machine (ELM): This machine learning algorithm is utilized for the classification of different food crops based on the extracted features. The modified sine cosine algorithm (MSCA) optimization technique is used to fine-tune the parameters of ELM for improved classification accuracy. Extensive experimental analyses are conducted to evaluate the performance of the proposed DTODCNN-CC approach. The results demonstrate that DTODCNN-CC can achieve significantly higher crop classification accuracy compared to other state-of-the-art deep learning methods. The proposed DTODCNN-CC technique provides a promising solution for efficient and accurate crop classification using remote sensing images. This approach has the potential to be a valuable tool for various applications in agriculture, food security, and environmental monitoring.

Radial basis function‐based Pareto optimization of an outer rotor brushless DC motor

AbstractThis paper presents the development of an optimization and modeling method for the objective functions of output power, efficiency and weight of an outer rotor permanent magnet brushless DC (BLDC) motor based on radial basis function (RBF) approximation technique. The proposed RBF‐based Pareto optimization method requires less knowledge about electric/magnetic formulas and can replace conventional optimizations based on these equations with higher accuracy. To apply the proposed optimization method, the initial design should be developed using such equations. Therefore, RBFs are used to model and predict engine behavior. To optimize the objective functions, we used a genetic algorithm optimization technique with nonlinear electric and magnetic constraints to find the Pareto front set. The design obtained by the proposed radial basis function Pareto optimization (RBFPO) method was finally verified by Ansoft Maxwell. The results of optimal design using the RBFPO method have higher output power and efficiency. Also, in addition to the advantage of a favorable accuracy, RBF‐based models are significantly faster than models available in simulation tools.

Two new single/multi-objective multi-strategy algorithms for the parametric estimation of dual band-notched ultra wideband antennas

This article introduces a novel single objective and a multi-objective multi-hybrid naked mole-rat (moIGDN) algorithm optimization techniques for solving numerical benchmarks and electromagnetic engineering problems. The hybridization was introduced to overcome the basic naked mole-rat algorithm’s (NMRA’s) local optima stagnation and poor exploration problems. The global exploration search equations of INFO, gazelle optimization algorithm (GOA), and dwarf mongoose optimization algorithm (DMO) have been added into the NMRA’s worker phase. Additionally, five mutation operators have been introduced for parametric enhancements and adaptations. For single-objective performance evaluation, three benchmark datasets namely classical benchmark, CEC 2014, CEC 2017, and CEC 2022 have been analysed. A comparison with JADE, SaDE, CMA-ES, success history based DE (SHADE), fractional-order calculus-based FPA (FA-FPO), LSHADE-SPACMA, NL-SHADE-LBC, evolutionary algorithms with eigen crossover (EA4eig), S-LSHADE-DP, L-SHADE-RSP-MID, EBOwithCMAR, LSHADE-EpSin among others. Apart from that, the proposed moIGDN algorithm was utilized to optimize the design of two electromagnetic multi-objective printed monopole antennas categorized as basic ultra-wideband (B-UWB) and dual band-notched ultra-wideband (DBN-UWB) antennas. Simulations have been performed by using the EM-MATLAB optimization interface with two objective functions: trying to minimize pass-band signal reflection and maximizing antenna gain, by mapping solutions to the Pareto-front boundary in the objective space. The best obtained antenna structure had an impedance bandwidth of 2.92–11.96 GHz (fractional bandwidth of 122%), efficient band-rejection characteristics for the WI-MAX (3.3 GHz–3.7 GHz) and WLAN (5.15 GHz–5.85 GHz) bands, and a compact geometry. Based on simulation results, moIGDN is found to be effective and can be utilized to solve complex wireless communication and advanced engineering optimization problems.

Multigene genetic programming approach for modelling and optimisation of removal of heavy metals from ash pond water using cyanobacterial-microalgal consortium

ABSTRACT Heavy metals such as Lead(II), Nickel(II), Manganese(II), Cadmium(II), Chromium(VI), and others are leached from coal ash in thermal power plants, contaminating ash pond water and subsequently contaminating groundwater. Phycoremediation using microalgae or cyanobacteria is an emerging technology to remove such heavy metals from ash pond water. The present study aims at development of an accurate data-driven Genetic Programing (GP) approach for modelling of the phycoremediation process for abatement of the above-mentioned heavy metals using a consortium comprising of a cyanobacterium Synechococcus sp. and green algae Chlorella sp. The developed model was used to find a relation between the average percentage removal of metals with all input parameters such as the initial metal concentrations, pH, and days. To maximise metal removal, Genetic Algorithm (GA) optimisation technique was applied to determine optimal values of input parameters. These optimum input parameters are difficult to get through experimentation using the trial and error method. The established modelling and optimisation technique is generic and can be applied to any other experimental study.