Alginate Hydrogel Research Articles

Evaluation effect of alginate hydrogel containing losartan on wound healing and gene expression.

Skin tissue engineering has become an increasingly popular alternative to conventional treatments for skin injuries. Hydrogels, owing to their advantages have become the ideal option for wound dressing, and they are extensively employed in a mixture of different drugs to accelerate wound healing. Sodium alginate is a readily available natural polymer with advantages such as bio-compatibility and a non-toxicological nature that is commonly used in hydrogel form for medical applications such as wound repair and drug delivery in skin regenerative medicine. Losartan is a medicine called angiotensin receptor blocker (ARB) that can prevent fibrosis by inhibiting AT1R (angiotensin II type 1 receptor). In this research, for the first time, three-dimensional scaffolds based on cross-linked alginate hydrogel with CaCl2 containing different concentrations of losartan for slow drug release and exudate absorption were prepared and characterized as wound dressing. Alginate hydrogel was mixed with 10, 1, 0.1, and 0.01mg/mL of losartan, and their properties such as morphology, chemical structure, water uptake properties, biodegradability, stability assay, rheology, blood compatibility, and cellular response were evaluated. In addition, the therapeutic efficiency of the developed hydrogels was then assessed in an in vitro wound healing model and with a gene expression. The results revealed that the hydrogel produced was very porous (porosity of 47.37 ± 3.76µm) with interconnected pores and biodegradable (weight loss percentage of 60.93 ± 4.51% over 14days). All hydrogel formulations have stability under various conditions. The use of CaCl2 as a cross-linker led to an increase in the viscosity of alginate hydrogels. An in vitro cell growth study revealed that no cytotoxicity was observed at the suggested dosage of the hydrogel. Increases in Losartan dosage, however, caused hemolysis. In vivo study in adult male rats with a full-thickness model showed greater than 80% improvement of the primary wound region after 2weeks of treatment with alginate hydrogel containing 0.1mg/mL Losartan. RT-PCR and immunohistochemistry analysis showed a decrease in expression level of TGF-β1 and VEGF in treatment groups. Histological analysis demonstrated that the alginate hydrogel containing Losartan can be effective in wound repair by decreasing the size of the scar and tissue remodeling, as evidenced by future in vivo studies.

Single-layer graphene oxide nanosheets induce proliferation and Osteogenesis of single-cell hBMSCs encapsulated in Alginate Microgels

Microfluidics cell encapsulation offers a way to mimic a 3D microenvironment that supports cell growth and proliferation, while also protecting cells from environmental stress. This technique has found extensive applications in tissue engineering and cell therapies. Several studies have demonstrated the advantages of graphene oxide (GO) as an osteogenic inducer; however, the significance of GO on stem cell fate in the single-cell state is still unclear. Here, a microfluidics-based approach is developed for continuous encapsulation of mesenchymal stem cells (MSCs) at the single-cell level using alginate microgels. So, single-layer graphene oxide (slGO) nanosheet is used to be encapsulated inside the alginate droplets. The results of AFM and SEM show that slGO can increase the roughness and reduce the stiffness of alginate hydrogels. The Young’s modulus of the alginate and alginate-slGO was obtained as 1414 kPa and 985.9 kPa, respectively. Live/dead assay and fluorescence microscopy images illustrate that slGO can maintain the viability and proliferation of microencapsulated hBMSCs. The obtained results show that slGO increases the mineralization of the encapsulated hBMSCs, so that microgels containing hBMSCs gradually became opaque during 21 days of culture. RT-qPCR results indicate that the expression of OCN, Runx2, and ALP in the alginate-slGO microgels is significantly higher than in the alginate microgels. The expression of OCN and Runx2 in the alginate-slGO microgels is 4.27 and 5.87-fold higher than in the alginate microgels, respectively. It can be concluded that low doses of slGO nanosheets have the potential to be utilized in the development of tissue engineering and bone regeneration. This finding offers a new method for creating injectable tissue transplants that are minimally invasive.

High-strength, super-hydrophilic alginate electrospun nanofibrous membranes for rapid oil-water emulsion separation

Ultrafiltration membrane separation technology is considered an effective method for separating oil-water emulsions. However, oil droplets can easily deposit on the surface of the membranes, leading to severe fouling and a decrease in flux. In this study, poly (ethylene oxide)/acrylamide/sodium alginate (PEO/AM/NaAlg) hydrogel nanofibers were deposited on a poly (hydroxybutyric acid) (PHB) electrospun nanofibrous membrane. Subsequently, superhydrophilic (ethylene oxide)-poly(acrylamide)/calcium alginate hydrogel nanofiber composite filtration membranes (PEO/PAM/CaAlg-PHB) were prepared by polymerization and Ca2+ cross-linking using a PHB electrospun nanofibrous membrane as the matrix. The morphology, tensile strength, water contact angle, and oil–water emulsion separation properties of the PEO/PAM/CaAlg-PHB hydrogel filtration membrane were investigated. The results showed that the PEO/PAM/CaAlg-PHB membrane had good anti-fouling performance, with a tensile strength of 1.95 MPa. After 3 h of the filtration operation, the stable flux and oil–water emulsion rejection of the membrane reached 2925.2 L m−2 h−1 bar−1 and 98.66 %, respectively. The preparation method was simple, cost effective, and environmentally friendly, without introducing any organic pollutants. The PEO/PAM/CaAlg-PHB hydrogel filtration membrane shows promise for separating oil–water emulsions.

Highly conductive and sensitive alginate hydrogel strain sensors fabricated using near-field electrohydrodynamic direct-writing process

Hydrogel flexible sensors have attracted considerable attention because of their wearability, biocompatibility, and precision signal transmission capability. However, the hydrogel strain sensors fabricated by conventional printing or hand-injection methods have difficulty balancing their mechanical strength and sensing characteristics, limiting the application of hydrogel strain sensors. Herein, polyvinyl alcohol and polyacrylamide were loosely crosslinked with sodium alginate through chemical cross-linking. Subsequently, MXene nanosheets were introduced for doping, the crosslinked hydrogel conductive network was constructed, and the hydrogel strain sensors were fabricated using the electrohydrodynamic (EHD) printing method. The ions in the EHD-printed hydrogel undergo directional movement under an externally enhanced electric field, causing the formation of more uniform and dense porous conductive networks inside the hydrogel, and high electrical conductivity (0.49 S m−1) is obtained. These hydrogel strain sensors have excellent mechanical properties (tensile strength: 0.17 MPa at 787 % strain), high sensitivity (gauge factor: 1.54 at 0–100 % strain), and low detection limits (1 % strain). Furthermore, demonstrations of real-time Morse code tapping information transmission, handwriting recognition during writing, and human physiological behavior monitoring demonstrations using the fabricated sensors indicate that the EHD-printed hydrogel strain sensor method has significant potential for wearable devices and human-computer interaction applications.

3D morphometry of endothelial cells angiogenesis in an extracellular matrix composite hydrogel

Human umbilical vein endothelial cells (HUVECs) play a fundamental role in angiogenesis. Herein, we introduce digital holographic microscopy (DHM) for the 3D quantitative morphological analysis of HUVECs in extracellular matrix (ECM)-based biomaterials as an angiogenesis model. The combination of volumetric information from DHM and the physicochemical and cytobiocompatibility data provided by fluorescence microscopy and cytology offers a comprehensive understanding of the angiogenesis-related parameters of HUVECs within the ECM. DHM enables label-free, non-contact, and non-invasive 3D monitoring of living samples in real time, in a quantitative manner. In this study, the human amniotic membrane (HAM) is decellularized, pulverized, and combined with sodium alginate hydrogel to provide an in vitro substrate for modeling HUVEC angiogenesis. Our results demonstrate that modifying alginate hydrogel with HAM enhances its biofunctionality due to the presence of ECM components. Moreover, the DHM results reveal an increase in its porous properties, which, in turn, aids in interpreting the tubulation results.

Alleviating rheumatoid arthritis with a photo-pharmacotherapeutic glycan-integrated nanogel complex for advanced percutaneous delivery

The prospective of percutaneous drug delivery (PDD) mechanisms to address the limitations of oral and injectable treatment for rheumatoid arthritis (RA) is increasing. These limitations encompass inadequate compliance among patients and acute gastrointestinal side effects. However, the skin’s intrinsic layer can frequently hinder the percutaneous dispersion of RA medications, thus mitigating the efficiency of drug delivery. To circumvent this constraint, we developed a strontium ranelate (SrR)-loaded alginate (ALG) phototherapeutic hydrogel to assess its effectiveness in combating RA. Our studies revealed that this SrR-loaded ALG hydrogel incorporating photoelectrically responsive molybdenum disulfide nanoflowers (MoS2 NFs) and photothermally responsive polypyrrole nanoparticles (Ppy NPs) to form ALG@SrR-MoS2 NFs-Ppy NPs demonstrated substantial mechanical strength, potentially enabling delivery of hydrophilic therapeutic agents into the skin and significantly impeding the progression of RA. Comprehensive biochemical, histological, behavioral, and radiographic analyses in an animal model of zymosan-induced RA demonstrated that the application of these phototherapeutic ALG@SrR-MoS2 NFs-Ppy NPs effectively reduced inflammation, increased the presence of heat shock proteins, regulatory cluster of differentiation M2 macrophages, and alleviated joint degeneration associated with RA. As demonstrated by our findings, treating RA and possibly other autoimmune disorders with this phototherapeutic hydrogel system offers a distinctive, highly compliant, and therapeutically efficient method.

Numerical Simulation of the Diffusion of Electroactive Molecule in Biosimilar Hydrogel Media

Based on experimental data of cyclic voltammetry, the values of the diffusion coefficients for toluidine blue in alginate hydrogel, gelatine hydrogel and alginate-gelatine hydrogels were obtained. Using the experimental values of the coefficients in a numerical model, the values of the recovery of flows have been calculated showing them consistent with what was the experimental. It is proposed to use the period in time during which the value of the flow force reaches the value of steady state flow force as an indicator of the diffusion properties of the hydrogel medium. The findings of this study can be used for the development of methods for the evaluation of the diffusion properties of hydrogel media: bioinks and tissue-engineered structures.

Three-dimensional bioprinted materials in alginate-hyaluronic acid complex based hydrogel based bio-ink as absorbents for heavy metal ions removal

Major environmental and health effects arise from the presence of heavy metals in water, including lead (Pb²⁺), mercury (Hg²⁺), chromium (Cr⁶⁺), cadmium (Cd²⁺), and arsenic (As³⁺), which contribute significantly to water pollution and pose severe risks to ecosystems and human health. This study demonstrates the fabrication of 3D printed self-regenerative functional living materials, a fungi, by using mixture of sodium alginate and hyaluronic acid hydrogel as absorbents to remove the heavy metals from the environment. Bioprinting has emerged as a transformative technology for fabricating complex biological constructs. The bioprinting experiments, conducted with optimized parameters, revealed the viscoelastic behavior of the hydrogel, suitable for 3D bioprinting applications. MicroCT analysis indicated that the hydrogel's porosity and structural properties support fungal growth in a controlled three-dimensional setting. Microscopic analyses, including phase contrast microscopy, FESEM, and HRTEM, provided insights into the cellular morphology of the bioprinted constructs. Cell viability was assessed using flow cytometry with FDA and PI staining, showing a significant population of live cells, affirming the biocompatibility of the hydrogel. Additionally, the study explored the hydrogel's potential for heavy metal removal from water samples. Multi-element standard solutions containing Copper (Cu²⁺), Cadmium (Cd²⁺), Nickel (Ni²⁺), Cobalt (Co²⁺), and Ferrous (Fe³⁺) ions at different concentrations were incubated with hydrogel patches embedded with Aspergillus flavus. Atomic absorption spectrophotometry analysis showed rapid initial removal rates of metal ions, with maximum removal efficiency achieved around the 12th hour. Comparisons with a control hydrogel without the fungal strain demonstrated significantly enhanced removal efficiency due to the presence of Aspergillus flavus. This study highlights the dual functionality of sodium alginate with hyaluronic acid -based hydrogels for bioprinting fungi and for environmental remediation of heavy metals, offering promising applications in environmental cleanup.

Cross-Linker Architectures Impact Viscoelasticity in Dynamic Covalent Hydrogels.

Dynamic covalent cross-linked (DCC) hydrogels represent a significant advance in biomaterials for regenerative medicine and mechanobiology, offering viscoelasticity, and self-healing properties that more closely mimic in vivo tissue mechanics than traditional, predominantly elastic, covalent hydrogels. However, the effects of varying cross-linker architecture on DCC hydrogel viscoelasticity have not been thoroughly investigated. This study introduces hydrazone-based alginate hydrogels to explore how cross-linker architectures impact stiffness and viscoelasticity. In hydrogels with side-chain cross-linker (SCX), higher cross-linker concentrations enhance stiffness and decelerate stress relaxation, while an off-stoichiometric hydrazine-to-aldehyde ratio reduces stiffness and shortens relaxation time. In hydrogels with telechelic cross-linking, maximal stiffness and relaxation time occurs at intermediate cross-linker mixing ratio for both linear cross-linker (LX) and star cross-linker (SX), with higher cross-linker valency further enhancing these properties. Further, the ranges of stiffness and viscoelasticity accessible with the different cross-linker architectures are found to be distinct, with SCX hydrogels leading to slower stress relaxation relative to the other architectures, and SX hydrogels providing increased stiffness and slower stress relaxation versus LX hydrogels. This research underscores the pivotal role of cross-linker architecture in defining hydrogel stiffness and viscoelasticity, providing insights for designing DCC hydrogels with tailored mechanical properties for specific biomedical applications.

Congelation- and dehydration-tolerant, mechanically robust hydrogel electrolyte for durable iontronic sensors operating in open air and freezing temperatures over wide strain and pressure ranges

Conventional hydrogels have limitations in mechanical properties and are susceptible to loss of elasticity and conductivity caused by congelation and dehydration, limiting their practical uses for application in high-stress environments, open air, and freezing temperatures. This study introduces a mechanically robust, dehydration- and congelation-tolerant, and ionically conductive hydrogel electrolyte, practical for iontronic sensors working in wide pressure and strain ranges under open-air and freezing temperatures. This hydrogel electrolyte is fabricated through a reconstruction process comprising a drying-induced densification of double-network hydrogel of alginate and polyacrylamide, a structure fixation by Fe3+ crosslinking, and a Li+ infiltration. The resultant hydrogel electrolyte is tolerant to dehydration and congelation and mechanically robust, with strength and elastic modulus of a few mega-pascals comparable to those of non-conductive elastomers/rubbers used as dielectric materials. Therefore, the hydrogel electrolyte-based iontronic sensors demonstrate exceptional sensitivity and stability under compression and tension and across a wide temperature range. Further, the sensor demonstrates their practical applicability in high-stress environments from kg-range human weight to ton-range car weight. These achievements evince that iontronic sensors, based on mechanically robust and ionically conductive hydrogel electrolytes tolerant to congelation and dehydration, can be employed for practical applications.

Evaluating the potential of soy protein isolate /alginate hydrogel as polyphenolic liposome carrier during gastrointestinal tract: A case study on sumac extract

Sumac seed is one of the best sources of polyphenolic compounds and natural antioxidants. This study was conducted to protect the polyphenolic compounds of sumac extract. For this purpose, the chemical composition of sumac extract (SE) was identified using LC-MS technique. Then sumac extract was trapped in liposomal structures and physicochemical properties were evaluated. The results showed that the size and specific surface areas of the liposomes influenced the entrapment efficiency of SE. The zeta potential of liposomes containing SE indicated stability between bioactive substances and liposome bilayers. In the next step, three ratios of soy protein isolate-alginate hydrogel (P1A3, P1A1, and P3A1) were applied to cover the liposome-SE. Furthermore, the flow behavior, surface morphological analysis, texture, and release of phenolic compounds from soy protein isolate-alginate hydrogels containing SE were investigated. Quantitative data showed variations in particle size, sphericity, and loading efficiency according to the SPI to ALG ratio. Fourier-transform infrared spectroscopy confirmed the interactions between the components at a molecular level. This study provided valuable insights into the design and optimization of drug delivery systems and functional food ingredients, highlighting the complexities involved in the controlled release of bioactive substances.

Covalent organic framework composite hydrogel sorbent beads for vortex-assisted dispersive miniaturized solid phase extraction of parabens and synthetic phenolic antioxidants in foodstuffs

A covalent organic framework composite hydrogel sorbent beads was fabricated for the vortex-assisted dispersive miniaturized-solid phase extraction and determination of parabens and synthetic phenolic antioxidants from food matrices. The covalent organic framework was entrapped into alginate hydrogel beads. This composite sorbent effectively adsorbs analytes through hydrophobic, π-π and hydrogen bonding interactions. Under optimal extraction conditions, the developed method demonstrated good linearity from 1.00 to 100 µg kg−1 for methyl paraben and 2.00 to 100 µg kg−1 for tertiary butylhydroquinone, propyl paraben, butyl paraben and butylated hydroxyanisole. Limits of detection ranged from 0.25 to 0.50 µg kg−1. The developed sorbent was applied to the extraction of parabens and synthetic phenolic antioxidants from tomato paste, mayonnaise, infant milk powder and coffee creamer samples. The analytes were separated and quantified by high-performance liquid chromatography, achieving recoveries ranging from 89 to 98 % with RSDs lower than 7 %. The vortex-assisted extraction approach was efficient, and the fabricated sorbent could be reused for up to eight cycles. The greenness of the methodology was also evaluated.

Thermo-controlled microfluidic generation of monodisperse alginate microspheres based on external gelation.

Droplet-based microfluidic systems have received much attention as promising tools for fabricating monodisperse microspheres of alginate solutions with high accuracy and reproducibility. The immediate and simple ionotropic gelation of alginate, its biocompatibility, and its tunability of mechanical properties make it a favorable hydrogel in the biomedical and tissue engineering fields. In these fields, micron-sized alginate hydrogel spheres have shown high potential as cell vehicles and drug delivery systems. Although on-chip microfluidic gelation of the produced alginate droplets is common, several challenges remain. Complicated chemical and microfabrication processes are required, and the risk of microchannel clogging is high. In the current study, we present an easy-to-use microfluidic external gelation process to produce highly spherical and monodisperse microspheres from very low-concentrated alginate-RGD solution [0.5% (w/v)]. To accomplish this, gelatin, a thermo-sensitive and inexpensive biomaterial, was incorporated into the alginate solution as a sacrificial biomaterial that mediates the off-chip external gelation of the alginate with Ca2+, and avoids droplet coalescence. Utilizing the methodology mentioned above, we successfully generated monodisperse alginate microspheres (AMs) with diameters ranging from 27 μm to 46 μm, with a coefficient of variation of 0.14, from a mixture of Arg-Gly-Asp (RGD)-modified very low viscosity alginate and gelatin. These RGD-AMs were used as microcarriers for human umbilical vein endothelial cells. The described easy-to-use and cost-effective microfluidic off-chip external gelation strategy exhibits comparable advantages to on-chip external gelation and demonstrates superiority over the latter since clogging is impossible.

B-179 Comparative Evaluation of Cisplatin Release from Alginate Hydrogels with Embedded Silver Nanoparticles: An HPLC and Colorimetric Spectrophotometry Study

Abstract Background Cisplatin [cis-dichlorodiamine platinum (II)], is a well-recognized chemotherapeutical drug. Cisplatin has been employed in treating a wide range of human cancers, such as those of the breast, bladder, lung, ovarian, and testicular cancers. Its therapeutic action is attributed to its capacity to form crosslinks with the DNA's purine bases, disrupting DNA repair processes, causing DNA damage, and ultimately leading to apoptosis in cancerous cells. Nonetheless, the application of cisplatin is constrained by the development of multidrug resistance and the occurrence of severe adverse effects, including nephrotoxicity, bone marrow suppression, hearing loss, allergic responses, nerve damage, and low magnesium levels in the blood. Numerous strategies have been explored to enhance the anticancer effectiveness of cisplatin while minimizing its associated toxicities. These strategies include combination therapies that incorporate nanoparticles, liposomes, and polymer micelles. In this project, cisplatin was embedded into alginate hydrogels loaded with silver nanoparticles and in vitro cisplatin release study using HPLC and UV-Vis spectrophotometry were studied. Methods We developed a novel nanocomplex by integrating silver nanoparticles (AgNPs) with alginate hydrogel coating to create a versatile platform for drug delivery. To incorporate the chemotherapeutic agent, cisplatin (150 ppm) was introduced into the AgNPs-alginate mixture utilizing rapid stirring to ensure uniform distribution and encapsulation of cisplatin within the nanocomplex. A range of analytical methods, such as UV-Vis, FTIR, SEM/EDX, and Zeta potential analysis, were employed to characterize the nanocomplex. To evaluate cisplatin release kinetics from the nanocomplex, we employed an in vitro dialysis method for monitoring its sustained release. High-performance liquid chromatography (HPLC) was used for precise cisplatin release quantification, then validated by colorimetric spectrophotometry. This dual-method approach ensured accurate insights into the nanocomplex’s release dynamics, substantiating its potential in enhancing targeted cancer therapy through advanced drug delivery systems. Results The analysis through UV-Vis revealed an absorption spectrum around 410 nm, indicative of the characteristic plasmon resonance associated with silver nanoparticles. TEM provided high-resolution imagery, revealing that the size of the silver nanoparticles varied between 4 and 30 nm, averaging at 13 nm with a standard deviation of 5 nm specifically for the alginate-coated AgNPs. SEM images confirmed the anticipated spherical distribution of silver nanoparticles within the alginate hydrogel framework. EDX spectroscopy analysis further verified the incorporation of silver nanoparticles and platinum within the complex. The cisplatin release studies from this newly developed nanocomplex illustrated a prolonged, slow, and consistent release pattern, extending over days, in stark contrast to the rapid and complete release of cisplatin from its unbound state, which achieved peak release within an hour. Conclusions In this study, we successfully developed and validated an innovative, multifunctional nanoplatform for drug delivery, comprising alginate hydrogel synergistically co-loaded with silver nanoparticles (AgNPs) and cisplatin. This novel drug carrier system demonstrated a marked enhancement in the controlled delivery of cisplatin, evidenced by the slow and sustained release profile observed over three days. The slow and sustained release of cisplatin from the alginate complex, compared to the free form, highlights the efficacy of the nanoplatform in modulating the drug’s release kinetics.

Stereolithography-assisted sodium alginate-collagen hydrogel scaffold with molded internal channels

Fabricating internal vascular networks within a hydrogel scaffold is essential for facilitating the supply of nutrients, oxygen, and metabolism exchange required by the encapsulated cells. The challenges in current hydrogel scaffold fabrication involve the difficulty of building adequate internal channels, poor scaffold geometry precision, and low cell viability caused by the fabrication process and polymer material properties. Stereolithography (SLA) stands out as a 3D printing technique distinguished by its superior production efficiency, advanced precision, and remarkable resolution in crafting intricate custom geometries. These attributes establish it as an innovative approach for templates in scaffold fabrication, potentially surpassing the fused deposition modeling (FDM)-based template strategy. Meanwhile, it exerts less shear stress on the cells compared to the direct bioprinting process. This novel strategy enables the fabrication of hydrogel vascular structure within the precision of 500 µm in both channel diameter and wall thickness. In this paper, various sodium alginate and collagen (SA-Col) composite hydrogels with varying collagen concentrations have been investigated to identify the optimal ratio for fabricating hydrogel scaffolds with channels.

In-situ preparation of lanthanide luminescent MOF hydrogel for aldehyde detection☆

Metal-organic frameworks (MOFs) usually exist in the state of powder or crystal. When they are exposed to hydrophilic solvents, their structure will change and become unstable. Therefore, it is a challenge to construct MOF materials with tunable mechanical properties. Herein, we report in-situ growth lanthanide metal-organic framework (LnMOF) in sodium alginate (SA) and polyvinyl alcohol (PVA) hydrogel matrix. The prepared composite hydrogel not only displays characteristic lanthanide narrow-band emission under ultraviolet light, but also demonstrates excellent mechanical properties. The addition of LnMOF significantly enhances the compressive strength of the hydrogel (from 0.75 to 7.32 MPa). Furthermore, the composite hydrogel shows highly selective recognition of glutaraldehyde and gaseous formaldehyde at room temperature. The detection limits (LOD) of SP-EuMOF for glutaraldehyde and formaldehyde are 0.27 and 0.22 ppm, respectively. Based on these results, the LnMOF composite hydrogel is deemed to have significant potential as a fluorescent sensor for both glutaraldehyde and formaldehyde detection.

Cartilage defect repair in a rat model via a nanocomposite hydrogel loaded with melatonin-loaded gelatin nanofibers and menstrual blood stem cells: an in vitro and in vivo study

Cartilage damage caused by injuries or degenerative diseases remains a major challenge in the field of regenerative medicine. In this study, we developed a composite hydrogel system for the delivery of melatonin and menstrual blood stem cells (MenSCs) to treat a rat model of cartilage defect. The composite delivery system was produced by incorporation of melatonin into the gelatin fibers and dispersing these fibers into calcium alginate hydrogels. Various characterization methods including cell viability assay, microstructure studies, degradation rate measurement, drug release, anti-inflammatory assay, and radical scavenging assay were used to characterize the hydrogel system. MenSCs were encapsulated within the nanocomposite hydrogel and implanted into a rat model of full-thickness cartilage defect. A 1.3 mm diameter drilled in the femoral trochlea and used for the in vivo study. Results showed that the healing potential of nanocomposite hydrogels containing melatonin and MenSCs was significantly higher than polymer-only hydrogels. Our study introduces a novel composite hydrogel system, combining melatonin and MenSCs, demonstrating enhanced cartilage repair efficacy, offering a promising avenue for regenerative medicine.Graphical

Engineered MXene/Bi2S3 nanoflowers in sodium alginate hydrogel: A synergistic eradicator of disinfected byproducts in aqueous environment

In this work, Bi2S3 nanoflowers were in situ anchored on the surface of Ti3C2 via a hydrothermal process to obtain MXene-supported Ti3C2/Bi2S3 nanocomposite, then incorporated inside in sodium alginate polymer to prepared hydrogel materials (Ti3C2/Bi2S3@SA-H) which outperforms and have an excellent capability for the removal of pollutants like disinfected byproducts. The synthesized hydrogel material Ti3C2/Bi2S3@SA-H may be utilized for a variety of functional materials in environmental applications. Furthermore, the Ti3C2/Bi2S3@SA-H was characterized by SEM, EDX, XRD, BET, AFM, FTIR, Zeta potential, XPS, Raman and TGA. Remarkably, Ti3C2/Bi2S3@SA-H hydrogel 0.007 cm3 g−1, 159.5 nm and 0.0017 cm3 g−1, 160.5 nm materials exhibited the highest average pore diameter. The research focused on evaluating the adsorption capability of Ti3C2/Bi2S3@SA-H hydrogel materials for 2,6-dibromo-4-nitrophenol (DBNP), 2,4,6-triiodophenol (TIP), 2,4,6-Trichlorophenol (TCP) and 2,6-dichloro-4-nitrophenol (DCNP). The findings indicated that the material exhibited the eradication efficiency of about 662, 657, 647 and 617 mg/g from DBNP, TIP, TCP and DCNP respectively. Several adsorption isotherms were extensively examined, encompassing the Temkin, Langmuir and Freundlich models, alongside pseudo-first and second-order models. The Langmuir and pseudo-second-order models showed the highest degree of consistency with the observed data. Concerning regeneration and reusability, the materials demonstrated easy regeneration and effective recyclability over the course of 10 cycles. The notable adsorption capacity, coupled with the innovative combination of Ti3C2/Bi2S3 and polymer hydrogel, along with its recyclability, positions our material Ti3C2/Bi2S3@SA-H as a highly prospective competitors for wastewater treatment and other critical areas in water research.

Enhanced phosphate removal from aqueous environments using three-dimensional La-doped carboxylic carbon nanotubes/alginate: Performance and mechanisms

The excessive amounts of phosphorus (P) discharged and usage have caused eutrophication and algal blooms, which seriously jeopardize the environment even the human health. In this study, carbon nanotubes (CNTs) served as carriers to develop a lanthanum-based sodium alginate hydrogel (La-CNT-COOH/SA) aimed at efficiently removing phosphate from wastewater. Characterization results confirmed successful deposition of La(OH)3 nanoparticles onto CNT-COOH. The optimal adsorption efficiency of La-CNT-COOH/SA hydrogels occurred at pH 4, with a maximum adsorption capacity of 54.4 mg/g under an initial phosphate concentration of 60 mg/L. Batch experiments demonstrated that La-CNT-COOH/SA performed well across a favorable pH range and exhibited high tolerance to common coexisting ions during phosphate adsorption. Adsorption isotherms indicated a dominance of both physical and chemical mechanisms in phosphate removal by La-CNT-COOH/SA. At elevated phosphate concentrations, the adsorption process followed quasi-second-order kinetics, primarily driven by chemical adsorption. Multi-instrument characterization emphasized that the substantial loading of La(OH)3 on CNT-COOH significantly contributed to adsorption, alongside crosslinked lanthanum ions on sodium alginate and abundant hydroxyl groups. Mechanisms of adsorption by La-CNT-COOH/SA encompassed electrostatic interactions, surface precipitation, and in-sphere complexation (La-O-P). These findings on fabrication, properties, and adsorption mechanisms of the phosphate-removal hydrogel lay a theoretical foundation for applying biomass-based materials in large-scale remediation practices.

In Vitro Digestion and Fermentation of Cowpea Pod Extracts and Proteins Loaded in Ca(II)-Alginate Hydrogels.

Antioxidants derived from food by-products are known for their bioactive properties and impact on human health. However, the gastrointestinal behavior is often poor due to their degradation during digestion. The development of Ca(II)-alginate beads supplemented with biopolymers and enriched with cowpea (Vigna unguiculata) extract could represent a novel environmentally friendly technological solution to produce functional ingredients in the food industry. The present study evaluates the impact of in vitro digestion/fermentation by analyzing global antioxidant response (GAR), production of short-chain fatty acids (SCFAs) as a modulation of gut microbiota, and behavior of proton transverse relaxation times by low-field nuclear magnetic resonance (as an indicator of gelation state and characterization of microstructure). Results revealed that guar gum and cowpea protein preserved a high GAR of total phenolic compounds and antioxidant capacity by ABTS and FRAP methods after digestion/fermentation, promoting an adequate protection of the bioactives for their absorption. Alginate-based beads have great potential as prebiotics, with the guar gum-containing system contributing the most to SCFAs production. Finally, the overall higher mobility of protons observed in the intestinal phase agrees with structural changes that promote the release of phenolic compounds during this stage. Beads are excellent carriers of bioactive compounds (cowpea phenolic compounds and peptides) with potential capacities.