Alcohol Substrates Research Articles

Synthesis and evaluation of water soluble pH sensitive poly (vinyl alcohol)-doxorubicin conjugates

The accuracy of spatiotemporal control cargo delivery and release are primordial to enhance the therapeutic efficiency and decrease the undesirable effects, in this context a novel prodrug were developed based on biocompatible polyvinyl alcohol (PVA) substrate. PVA was conjugated to doxorubicin (PVA-DOX) via an acid-labile hydrazone linkage. PVA was first functionalized with acidic groups, then reacted with hydrazine hydrate to form an amide bond. The amine group of PVA hydrazide was linked to carbonyl group (C = O) of DOX to form a pH sensitive hydrazone bond. The molecular structure of the PVA-DOX was confirmed by FTIR, XPS, and 1H-NMR analysis methods. The degree of grafting were evaluated by TGA and confirmed by XPS, which reveals the successful bond attachment of DOX to PVA. Our findings confirm pH dependent DOX release from PVA-DOX prodrug with faster release rate in acidic environment (pH 5.0, pH 6.0) and slower release rate in neutral pH environment (pH 7.4). Compared to the primary DOX, our synthesized PVA-DOX conjugates could exhibit a promising therapeutic effect, high biocompatibility and zero premature release. The results prove the successful synthesis of PVA-DOX conjugates with high efficiency.

Deeper Mechanistic Insight into Ru Pincer-Mediated Acceptorless Dehydrogenative Coupling of Alcohols: Exchanges, Intermediates, and Deactivation Species

The mechanism of acceptorless dehydrogenative coupling reaction (ADC) of alcohols to esters catalyzed by aliphatic pincer PHNP ruthenium complexes was experimentally studied. Relevant intermediate species involved in the catalytic cycle were isolated and structurally characterized by single-crystal X-ray diffraction studies, and their reactivity (including toward substrates related to the catalytic process) was probed. VT NMR studies unveiled several chemical exchanges connecting the Ru amido hydride, the Ru alkoxide, and the alcohol substrate. Under catalytic conditions, in situ IR spectroscopy monitoring demonstrated the production of ester via aldehyde as intermediate. A Tishchenko-like pathway is proposed as the main path for the production of ester from aldehyde, involving alkoxide and hemiacetaloxide Ru species (the latter being identified in the reaction mixture by NMR). Catalytic system deactivation under base-free conditions was found to be related to water traces in the reaction medium (either a...

Stereoselective Total Synthesis of the Non‐Contiguous Polyketide Natural Product (–)‐Dolabriferol

The stereoselective total synthesis of the non‐contiguous polypropionate dolabriferol has been accomplished in 17 steps, by an approach that is both divergent and convergent. The key reactions involved are enantioselective cross‐aldol coupling, aldol dimerisation of propionaldehyde, Sharpless asymmetric epoxidation, regioselective epoxide opening and Yamaguchi esterification. The effects of the protecting groups on the alcohol substrate on differential reactivity in Yamaguchi esterification were noteworthy.

Palladium-Catalyzed Csp3–H Bond mono-Aroyloxylation of O-Alkyl Substituted 2,4,6-Trimethoxybenzaldoxime Ethers

A palladium-catalyzed Csp3–H bond mono-aroyloxylation of O-alkyl substituted oxime ethers has been developed by using 2,4,6-trimethoxybenzaldoxime as an exo-type directing group with exclusive site-selectivity. With the wide range of masked aliphatic alcohol substrates and aromatic acid coupling partners, the protocol allows rapid access to various 2-alkyl substituted glycol derivatives in synthetically useful to good yields. The employed directing group is readily removed, accordingly affording valuable functionalized aliphatic alcohols. When the solvent from hybrid DCE/HFIP to CH3CN, non-directed oxidative cross-coupling is observed between the electron-rich aromatic ring of substrates and aromatic acid partners.

Nanofiber-like mesoporous alumina supported palladium nanoparticles as a highly active catalyst for base-free oxidation of benzyl alcohol

A nanofiber-like mesoporous alumina supported palladium catalyst, Pd/γ-Al2O3-fibr, was successfully prepared by a hydrothermal method and used in the aerobic oxidation of benzyl alcohol to benzaldehyde with molecular oxygen under base-free conditions. The material was characterized by N2 physisorption, FT-IR, X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and X-ray photo-electron spectroscopy (XPS). XRD and TEM results revealed that the palladium nanoparticles were uniformly dispersed in the framework of nanofiber-like mesoporous γ-alumina. The higher activity of Pd/γ-Al2O3-fibr compared to Pd/γ-Al2O3 and Pd/SBA-15 in the aerobic oxidation of benzyl alcohol reaction suggested that the unique fibrous architecture of our material and synergic effect between Pd species and γ-Al2O3 are beneficial to enhance the reactivity of palladium NPs. Furthermore, the unique architecture of Pd/γ-Al2O3-fibr catalyst also offers it good mass-transfer property and accessibility, which make it an effective catalyst for aerobic oxidation of steric bulk alcohol substrate. The Pd NPs supported on nano-fibrous mesoporous alumina in this paper is demonstrated to be a recoverable noble metal-based nanocatalyst with easy accessibility and may be great potential as a promising candidate for numerous catalytic applications.

Electroactive PVDF thin films fabricated via cooperative stretching process

ABSTRACTFerroelectric polymers have obtained much attention in low cost and flexible electronics. As one representative ferroelectric polymer, poly(vinylidene fluoride) (PVDF) has been comprehensively studied. Due to its complicated phase composition, fabrication of electroactive phases has been an open question especially for PVDF thin films deposited on solid substrates. Here cooperative stretching process is introduced for the fabrication of electroactive PVDF thin films. PVDF thin films are coated on stretchable poly(vinyl alcohol) substrates and mechanically stretched under optimized stretching parameters. Structural, spectral, and electrical measurements indicate that cooperative stretching process can effectively convert the nonpolar α phase to the electroactive β and γ phases companied by an enhancement of film crystallinity. Stretched PVDF films present a reverse piezoelectric coefficient of −37 pm/V, comparable with the results from films fabricated by the other techniques. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46324.

Hafnium inspired activation of highly hindered anhydrides in the acylation of alcohols and polyols

A novel and highly efficient method for activating highly hindered acid anhydrides towards the acylation of alcohols and carbohydrate-derived polyols has been developed. This new method relies on the capacity of the hafnium triflate catalyst Hf(OTf)2 to activate highly hindered acid anhydrides, and to direct the acylation reaction. This new acylation protocol is mild and proceed at room temperature with low catalyst loading. The method is versatile and has been extended to different alcohol substrates with different steric encumbrance as well as carbohydrate-derived polyols to afford the corresponding ester products in good to excellent yields.

In situ Generated Ruthenium Catalyst Systems Bearing Diverse N-Heterocyclic Carbene Precursors for Atom-Economic Amide Synthesis from Alcohols and Amines.

The transition-metal-catalyzed direct synthesis of amides from alcohols and amines is herein demonstrated as a highly environmentally benign and atom-economic process. Among various catalyst systems, in situ generated N-heterocyclic carbene (NHC)-based ruthenium (Ru) halide catalyst systems have been proven to be active for this transformation. However, these existing catalyst systems usually require an additional ligand to achieve satisfactory results. In this work, through extensive screening of a diverse variety of NHC precursors, we discovered an active in situ catalyst system for efficient amide synthesis without any additional ligand. Notably, this catalyst system was found to be insensitive to the electronic effects of the substrates, and various electron-deficient substrates, which were not highly reactive with our previous catalyst systems, could be employed to afford the corresponding amides efficiently. Furthermore, mechanistic investigations were performed to provide a rationale for the high activity of the optimized catalyst system. NMR-scale reactions indicated that the rapid formation of a Ru hydride intermediate (signal at δ=-7.8 ppm in the 1 H NMR spectrum) after the addition of the alcohol substrate should be pivotal in establishing the high catalyst activity. Besides, HRMS analysis provided possible structures of the in situ generated catalyst system.

Hydrogen-Borrowing Alcohol Bioamination with Coimmobilized Dehydrogenases.

The amination of alcohols is an important transformation in chemistry. The redox‐neutral (i.e., hydrogen‐borrowing) asymmetric amination of alcohols is enabled by the combination of an alcohol dehydrogenase (ADH) with an amine dehydrogenase (AmDH). In this work, we enhanced the efficiency of hydrogen‐borrowing biocatalytic amination by co‐immobilizing both dehydrogenases on controlled porosity glass FeIII ion‐affinity beads. The recyclability of the dual‐enzyme system was demonstrated (5 cycles) with total turnover numbers of >4000 and >1000 for ADH and AmDH, respectively. A set of (S)‐configured alcohol substrates was aminated with up to 95 % conversion and >99 % ee (R). Preparative‐scale amination of (S)‐phenylpropan‐2‐ol resulted in 90 % conversion and 80 % yield of the product in 24 h.

Catalytic oxidation of alcohols with novel non-heme N4-tetradentate manganese(ii) complexes.

We report the preparation and characterisation of a series of novel non-heme N4-tetradentate Mn(OTf)2 complexes of the type, [(L)MnOTf2], where L = R,R and S,S enantiomers of BPMCN, its 6-methyl and 6-bromo derivatives as well as the novel ligand BMIMCN (BPMCN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-(R,R/S,S)-1,2-diaminocyclohexane, BMIMCN = N,N'-dimethyl-N,N'-bis(1-methyl-2-imidazolemethyl)-(R,R/S,S)-1,2-diaminocyclohexane). Solid state structural analysis of the BMIMCN-ligated Mn-triflate complexes (R,R-C4 and S,S-C4) revealed opposite helicity but identical metal site accessibility. This feature was exploited in the catalytic oxidation of primary and secondary alcohols, with hydrogen peroxide as oxidant and acetic acid as co-catalyst. Complexes R,R-C4 and S,S-C4 displayed the highest activity in benzyl alcohol oxidation, attributed to the electron-donating property of the BMIMCN ligand. Complex S,S-C4, displayed high activity for a variety of primary alcohol substrates, but the reaction suffered from reduced selectivity and side-reactions due to the presence of acetic acid. In contrast, secondary alcohol substrates could be oxidised to the corresponding ketone products in excellent isolated yields under mild reaction conditions and short reaction times.

Boronic acids as molecular inks for surface functionalization of polyvinyl alcohol substrates

Boronic acids are proposed to be used as molecular inks for surface functionalization of polyvinyl alcohol substrates using marker pen applicators.

Catalytic racemization of secondary alcohols with new (arene)Ru(II)-NHC and (arene)Ru(II)-NHC-tertiary phosphine complexes

Five new complexes of the type [RuCl2(NHC)(η6-arene)] (4, 5, and 6) and [RuCl(NHC)(η6-arene)(PR3)]Cl (7 and 8) (NHCN-heterocyclic carbene=bmim, emim; arene=benzene, p-cymene; PR3=PPh3 or pta=1,3,5-triaza-7-phosphaadamantane) were synthetized and applied as catalysts (together with the known [RuCl2(bmim)(η6-p-cymene)] (3) with and without added PPh3) in racemization of optically active secondary alcohols in toluene. The highest catalytic activity, TOF=9.3h−1 (ee as low as 1.3% in 4h at 95°C) was observed in racemization of (S)-1-phenylethanol with a catalyst (4mol%) prepared in situ from 3 and 1 equivalent of PPh3. It is of practical significance that formation of acetophenone byproduct was suppressed to 3.5% by 17% v/v isopropanol in toluene. DFT calculations revealed that the rate determining step in the suggested reaction mechanism was the agostic coordination of hydrogen on the chiral carbon atom of the alcohol substrate.

Electrochemical Performance of Binary Ni-Co Particles Deposited on Graphene Oxide/Polyvinyl alcohol Substrate in Alkaline Medium

A composite electrode material based on graphene oxide (GO) and polyvinyl alcohol (PVA) containing electrodeposited Ni-Co species was electrochemically characterized in alkaline medium (0.1 M NaOH). The well distinct Ia/Ic redox couple shifts to the cathodic potentials in presence of Co oxide species contained in the active deposit. The effect of the potential scan rates (ν) on the Ia/Ic redox couple was studied in the range comprised between 10 mV s−1 and 250 mV s−1. The plots of the log(peak current) vs log(ν) gave straight lines with slopes between 0.65 and 0.75, showing a diffusive character of the redox currents. Continuous potentiostatic charge/discharge process between 0.4 V and 0.1 V vs SCE were carried out in alkaline medium in order to ascertain the supercapacitor performance of the investigated GC/GO/PVA/Ni-Co electrode. The composite electrode shows significantly higher capacitance (3.1 × 10−4 F). Admitting the only Ni-Co oxide as active electrode material, a specific capacitance of about 2100 ± 200 F g−1, was evaluated. During the charge/discharge process in alkaline medium, the electrode system shows, after an initial physical stabilization, a good electrochemical stability (<0.5%). Under cyclic voltammetry, the GC/GO/PVA/Ni-Co electrode shows good catalytic activity (0.5 V vs SCE) toward electrooxidation of several hydroxylated organic molecules. The sensitivities are related to the number of OH groups per molecule according to the following order: glucose > sorbitol > glycerol > methanol. Flow injection analysis (FIA), performed under flowing 0.1 M NaOH solution and an applied constant potential of 0.5 V, show well-defined symmetrical and reproducible peaks in a wide range of concentration of investigated analytes.

Catalyst-Controlled [3 + 2] and [4 + 2] Annulations of Oximes with Propargyl Alcohols: Divergent Access to Indenamines and Isoquinolines.

Rhodium(III)- and iridium(III)-catalyzed C-H activation of oximes and coupling with propargyl alcohols is discussed. Depending on the catalyst, the reaction pathway switched between [3 + 2] and [4 + 2] annulations, thus giving divergent access to indenamines and isoquinolines in a one-pot and atom-economical manner. The hydroxyl group in the tertiary propargyl alcohol substrate was found to be crucial in controlling chemoselectivity. Five-membered rhodacycle and iridacycle intermediates have also been identified for mechanism hypotheses.

Chemoselective Aliphatic C-H Bond Oxidation Enabled by Polarity Reversal.

Methods for selective oxidation of aliphatic C–H bonds are called on to revolutionize organic synthesis by providing novel and more efficient paths. Realization of this goal requires the discovery of mechanisms that can alter in a predictable manner the innate reactivity of these bonds. Ideally, these mechanisms need to make oxidation of aliphatic C–H bonds, which are recognized as relatively inert, compatible with the presence of electron rich functional groups that are highly susceptible to oxidation. Furthermore, predictable modification of the relative reactivity of different C–H bonds within a molecule would enable rapid diversification of the resulting oxidation products. Herein we show that by engaging in hydrogen bonding, fluorinated alcohols exert a polarity reversal on electron rich functional groups, directing iron and manganese catalyzed oxidation toward a priori stronger and unactivated C–H bonds. As a result, selective hydroxylation of methylenic sites in hydrocarbons and remote aliphatic C–H oxidation of otherwise sensitive alcohol, ether, amide, and amine substrates is achieved employing aqueous hydrogen peroxide as oxidant. Oxidations occur in a predictable manner, with outstanding levels of product chemoselectivity, preserving the first-formed hydroxylation product, thus representing an extremely valuable tool for synthetic planning and development.

Highly Efficient Rh(I) Homo- and Heterogeneous Catalysts for C-N Couplings via Hydrogen Borrowing.

Rhodium(I) complexes were explored as catalysts for the hydrogen borrowing reactions of amines and alcohols. Bidentate carbene-triazole ligands were readily synthesized via "click" reactions which allowed a diversity of ligand backbones to be accessed. The catalytic transformations are highly efficient, able to reach completion in under 6 h, and promote C-N bond formation across a range of primary alcohol and amine substrates. Moreover, site-selective catalysis can be achieved using substrates with more than one reactive site. A rhodium(I) complex covalently attached to a carbon black surface was also deployed in the hydrogen borrowing coupling reaction of aniline with benzyl alcohol. This represents the first report of a heterogeneous rhodium catalyst used for hydrogen borrowing.

First-Row-Transition Ion Metals(II)-EDTA Functionalized Magnetic Nanoparticles as Catalysts for Solvent-Free Microwave-Induced Oxidation of Alcohols

A series of first-row transition-metals combined with ethylenediamine tetraacetic acid (EDTA), as metal-based N,O-chelating ligands, at the surface of ferrite magnetic nanoparticles (MNPs) was prepared by a co-precipitation method. Those EDTA functionalized MNPs with general formula Fe3O4@EDTA-M2+ [M = Mn2+ (1), Fe2+ (2), Co2+ (3), Ni2+ (4), Cu2+ (5) or Zn2+ (6)] were characterized by FTIR (Fourier Transform Infrared) spectroscopy, powder XRD (X-ray Diffraction), SEM (Scanning Electron Microscope), EDS (Energy Dispersive Spectrometer), VSM (Vibrating Sample Magnetometer) and TGA (Thermal Gravity Analysis). The application of the magnetic NPs towards the microwave-assisted oxidation of several alcohol substrates in a solvent-free medium was evaluated. The influence of reaction parameters such as temperature, time, type of oxidant, and presence of organic radicals was investigated. This study demonstrates that these MNPs can act as efficient catalysts for the conversion of alcohols to the corresponding ketones or aldehydes with high selectivity and yields up to 99% after 2 h of reaction at 110 °C using t-BuOOH as oxidant. Moreover, they have the advantage of being magnetically recoverable catalysts that can be easily recycled in following runs.

Enhancement of the Oxidizing Power of an Oxoammonium Salt by Electronic Modification of a Distal Group.

The multigram preparation and characterization of a novel TEMPO-based oxoammonium salt, 2,2,6,6-tetramethyl-4-(2,2,2-trifluoroacetamido)-1-oxopiperidinium tetrafluoroborate (5), and its corresponding nitroxide (4) are reported. The solubility profile of 5 in solvents commonly used for alcohol oxidations differs substantially from that of Bobbitt's salt, 4-acetamido-2,2,6,6-tetramethyl-1-oxopiperidinium tetrafluoroborate (1). The rates of oxidation of a representative series of primary, secondary, and benzylic alcohols by 1 and 5 in acetonitrile solvent at room temperature have been determined, and oxoammonium salt 5 has been found to oxidize alcohols more rapidly than does 1. The rate of oxidation of meta- and para-substituted benzylic alcohols by either 1 or 5 displays a strong linear correlation to Hammett parameters (r > 0.99) with slopes (ρ) of -2.7 and -2.8, respectively, indicating that the rate-limiting step in the oxidations involves hydride abstraction from the carbinol carbon of the alcohol substrate.

Substitutions of S101 decrease proton and hydride transfers in the oxidation of betaine aldehyde by choline oxidase

Choline oxidase oxidizes choline to glycine betaine, with two flavin-mediated reactions to convert the alcohol substrate to the carbon acid product. Proton abstraction from choline or hydrated betaine aldehyde in the wild-type enzyme occurs in the mixing time of the stopped-flow spectrophotometer, thereby precluding a mechanistic investigation. Mutagenesis of S101 rendered the proton transfer reaction amenable to study. Here, we have investigated the aldehyde oxidation reaction catalyzed by the mutant enzymes using steady-state and rapid kinetics with betaine aldehyde. Stopped-flow traces for the reductive half-reaction of the S101T/V/C variants were biphasic, corresponding to the reactions of proton abstraction and hydride transfer. In contrast, the S101A enzyme yielded monophasic traces like wild-type choline oxidase. The rate constants for proton transfer in the S101T/C/V variants decreased logarithmically with increasing hydrophobicity of residue 101, indicating a behavior different from that seen previously with choline for which no correlation was determined. The rate constants for hydride transfer also showed a logarithmic decrease with increasing hydrophobicity at position 101, which was similar to previous results with choline as a substrate for the enzyme. Thus, the hydrophilic character of S101 is necessary not only for efficient hydride transfer but also for the proton abstraction reaction.

Allenols versus Allenones: Rhodium-Catalyzed Regiodivergent and Tunable Allene Reactivity with Triazoles.

2-Pyrrolines and 6-oxo-hexa-2,4-dienals have been prepared through the divergent reactions of 1-benzenesulfonyl-4-aryl-1,2,3-triazoles with functionalized allenes. The rhodium-catalyzed reactions between allenols and 1-benzenesulfonyl-4-aryl-1,2,3-triazoles yielded 2-pyrrolines. This transformation is compatible with the presence of aliphatic, aromatic, heterocyclic, amide, and halogen functional groups. Interestingly, a reactivity switch took place when the allene-tethered alcohol substrate was replaced by its ketone counterpart. When the rhodium-catalyzed reaction of 1-benzenesulfonyl-4-phenyl-1,2,3-triazole was performed with allenones, acyclic 6-oxo-hexa-2,4-dienals were stereoselectively formed as (2Z,4E) isomers.