Al Layer Research Articles

Experimental exploring of Ti3C2Tx MXene for efficient and deep removal of magnesium in water sample.

In this work, the mechanism and behaviour of magnesium adsorption with Ti3C2Tx adsorbent is investigated. Ti3C2Tx was synthesized by selective exfoliation of Al layer from Ti3AlC2 using acidic solutions of HF 40% and 12 M LiF/ 9 M HCl. The effect of the synthesis method on the structure, the interlayer distance, the type and abundance of the functional groups, the bonds formed, the surface area and the volume of the formed cavities were evaluated by X-ray diffraction, scanning electron microscopy, Energy-dispersive X-ray spectroscopy, Brunauer-Emmett-Teller and fourier transform infrared analyses. The preliminary discontinuous tests of magnesium adsorption with Ti3C2Fx and Ti3C2(OH)x in 100 ppm concentration, pH ~ 7.00, ambient temperature and time of 3 h show 182.5 and 99 mg.g-1 the adsorption intensity, respectively. The difference in adsorption intensity with Ti3C2Fx is the result of the extensive tendency of Mg2+ to conduct electrochemical reactions with F- twice as much as OH- functional groups. By designing the RSM experiment, analytical, qualitative, optimization and modelling of the magnesium adsorption process with Ti3C2Fx adsorbent was carried out with the input variables of magnesium concentration, pH, ambient temperature and time. Isothermal modelling shows the agreement of the experimental results with the Langmuir model and endothermic thermodynamic modelling shows the spontaneity of the adsorption reaction. MXene adsorption-desorption with 0.1 M HCl was done in up to 4 steps. The adsorption results show that Ti3C2Fx can show up to 15% initial adsorption intensity by maintaining stability in up to 4 adsorption-desorption steps.

ENHANCING SURFACE CHARACTERISTICS OF AA2024-T3 AIRCRAFT ALLOY THROUGH SYNERGISTIC ANODIZATION AND CERIUM CONVERSION COATING. PART I: PERFORMANCE IN MODEL CORROSIVE MEDIUM

The present study is devoted to the monitoring of the performance of AA2024-T3 specimens, after the formation of Anodic Aluminum Oxide (AAO) layer and/or deposition of a Ceruim Conversion Coating (CeCC), obtained at 20°C and 50°C, respectively. Although both methods are well described in the literature, there is no sufficient information regarding the effect of their combination on their behaviour in corrosive media. The performance of the respective specimens was elucidated after 24 h of exposure to 3.5 % NaCl model corrosive medium (MCM) by means of Electrochemical Impedance Spectroscopy (EIS) and acquisition of Potentiodynamic Scanning (PDS) curves. Since the combined AAO/CeCC coating primers revealed superior barrier properties, the respective specimens weresubjected to long-term corrosion tests of up to 672 h of exposure to the MCM to evaluate their durability. The results revealed the synergistic effect of the combination of the surface treatment procedures on effective corrosion mitigation.

Deep Ultraviolet Excitation Photoluminescence Characteristics and Correlative Investigation of Al-Rich AlGaN Films on Sapphire.

AlGaN is attractive for fabricating deep ultraviolet (DUV) optoelectronic and electronic devices of light-emitting diodes (LEDs), photodetectors, high-electron-mobility field-effect transistors (HEMTs), etc. We investigated the quality and optical properties of AlxGa1-xN films with high Al fractions (60-87%) grown on sapphire substrates, including AlN nucleation and buffer layers, by metal-organic chemical vapor deposition (MOCVD). They were initially investigated by high-resolution X-ray diffraction (HR-XRD) and Raman scattering (RS). A set of formulas was deduced to precisely determine x(Al) from HR-XRD data. Screw dislocation densities in AlGaN and AlN layers were deduced. DUV (266 nm) excitation RS clearly exhibits AlGaN Raman features far superior to visible RS. The simulation on the AlGaN longitudinal optical (LO) phonon modes determined the carrier concentrations in the AlGaN layers. The spatial correlation model (SCM) analyses on E2(high) modes examined the AlGaN and AlN layer properties. These high-x(Al) AlxGa1-xN films possess large energy gaps Eg in the range of 5.0-5.6 eV and are excited by a DUV 213 nm (5.8 eV) laser for room temperature (RT) photoluminescence (PL) and temperature-dependent photoluminescence (TDPL) studies. The obtained RTPL bands were deconvoluted with two Gaussian bands, indicating cross-bandgap emission, phonon replicas, and variation with x(Al). TDPL spectra at 20-300 K of Al0.87Ga0.13N exhibit the T-dependences of the band-edge luminescence near 5.6 eV and the phonon replicas. According to the Arrhenius fitting diagram of the TDPL spectra, the activation energy (19.6 meV) associated with the luminescence process is acquired. In addition, the combined PL and time-resolved photoluminescence (TRPL) spectroscopic system with DUV 213 nm pulse excitation was applied to measure a typical AlGaN multiple-quantum well (MQW). The RT TRPL decay spectra were obtained at four wavelengths and fitted by two exponentials with fast and slow decay times of ~0.2 ns and 1-2 ns, respectively. Comprehensive studies on these Al-rich AlGaN epi-films and a typical AlGaN MQW are achieved with unique and significant results, which are useful to researchers in the field.

Multiple shock and acceleration processes of high-velocity flyers driven by the HEAVEN-I laser facility

The experiments of high-velocity flyer acceleration were performed on the HEAVEN-I KrF laser facility with a long-pulse duration (∼ 28 ns). Double-layered flyers consisting of polystyrene and aluminum films can be accelerated to more than 10 km/s measured by VISAR. The polystyrene layer is used as the ablative material, insulation layer, and shock wave regulator. Multiple shock and acceleration processes were observed by adjusting the thickness of the polystyrene layer. We simulated and analyzed the multiple shock processes driven by the long laser pulses and square pressure pulses. The results indicate that the reverberation processes can be induced by the alternating shock and rarefaction waves due to the wave–interface interactions. The reverberations in the Al layer can modulate the pressure evolution and the fine structure of flyer acceleration history. Similar processes in the polystyrene layer can lead to a secondary or multiple shock loading process when the driving pulse duration is several times longer than the shock round trip time in the double-layered flyer. Multiple accelerations can effectively enhance the final velocities in the experimental and simulation results. However, multiple accelerations involve more complex shock loading and unloading processes, and flyers are more prone to breakup compared with single acceleration.

Enhancing corrosion resistance of Al alloy sheets with potential gradient by arc-sprayed Zn coatings

To improve the corrosion resistance and wide the application of Al alloy sheet in the engineering production, a corrosion potential gradient along the thickness of the Al alloy sheet was fabricated using the sprayed Zn layer. The process of arc spraying was employed to obtain the Zn coating with optimizing the parameters. Electrochemical testing was conducted on the surface of Al alloy sprayed with Zn layers at different depths. As the depth in the thickness direction increases, the content of Zn alloy elements gradually decreases and the potential gradually increases. This exhibits a gradual decrease in corrosion tendency. The results of electrochemical impedance spectra (EIS) revealed the existence of pitting corrosion on the surface of the Al alloy. This even extended to the underlying substrate material. In contrast, the Zn coating, when exposed to a corrosive environment, demonstrated the beneficial cathodic effect as a sacrificial anode and the protective function of a passivating film, thus mitigating corrosion. The gradual increase in charge transfer resistance in the impedance spectrum suggested that the corrosion resistance of the sample is increasingly improved. Therefore, it exhibited remarkable resistance to corrosion. Additionally, the SEM surface morphology and XRD pattern were utilized to further explain the corrosion mechanism of the arc-sprayed Zn coating. The Zn coating can provide sacrificial protection to the Al layer due to its higher negative potential and localized corrosion reactivity. This is attributed to the micro-galvanic couples formed between the Zn and Al layer, thus increasing the corrosion resistance of the sheets.

Analysis of the high-temperature transport property in GaN-based single and double heterostructures

GaN-based heterostructures have been proved to be excellent candidates for high-voltage, large-power, high-frequency and high-temperature application fields, thanks to their superior material properties. To further improve the carriers’ confinement, using InGaN channel layer or introducing AlGaN back barrier layer is promoted. These structures are also proved to be favorable for the robust electron mobility at high temperature. However, the reason solely rests on the longitudinal optical (LO) phonon scattering and the behind mechanism is still absent. This work compares the temperature-dependent electronic transport properties in three groups of GaN-based heterostructures, including GaN-based single heterostructure (SH) with/without AlN interlayer, GaN-based SH and double heterostructure (DH), and GaN-based DH with AlGaN or GaN channel layer. The advantageous high-temperature mobility is attributed to the enhanced LO phonon energy in heterostructures. By self-consistent calculations of the Schrödinger–Poisson equations, a close relation between the narrow electron distribution in the quantum well with the high LO phonon energy, and consequently superior mobility at high temperature is implied. The results provide a simple strategy for the optimized design of the GaN-based heterostructures outperforming at high temperature.

Achieving nearly 70 cm2/V·s field-effect mobility in single amorphous Ga-In-ZnO thin-film transistors deposited by sputtering process via intermediate patterned metal layer insertion

In this study, we introduce a novel method for enhancing the mobility of amorphous Ga-In-Zn-O (a-GIZO) thin-film transistors (TFTs) by incorporating a patterned metal layer within the a-GIZO single channel. The patterned metal layer comprises either a single layer of aluminum or a combination of aluminum and gold as the bottom and top layers, respectively. TFTs with a single aluminum layer achieved a field-effect mobility of 40.15 cm2/V∙s, significantly higher than the 16.22 cm2/V∙s of standard a-GIZO TFTs. This enhancement is attributed to aluminum’s low Gibbs free energy, which increases oxygen vacancies in the a-GIZO layer and thus improves carrier mobility. Furthermore, when a patterned dual-metal layer consisting of aluminum as the bottom layer and gold as the top layer is used, a field-effect mobility of 69.46 cm2/V∙s is achieved. This improvement is attributed to the low electrical resistivity of gold, which prevents oxidation between the upper gold layer and the a-GIZO layer deposited by sputtering process. Furthermore, this mechanism facilitates the enhancement of the reaction with a lower a-GIZO layer. The unique characteristics of gold prevent oxidation between the a-GIZO and gold interface, thereby promoting favorable interactions between Al and the underlying a-GIZO layer. Our findings demonstrate that strategically inserted patterned metal layers can significantly boost mobility of a single a-GIZO TFT while maintaining device stability, offering a promising approach for advanced display technologies.

AlN/AlGaN heterojunction field-effect transistors with a high-AlN-mole-fraction Al0.72Ga0.28N channel grown on single-crystal AlN substrate by metalorganic chemical vapor deposition

This paper presents research results on AlN/AlGaN heterojunction field-effect transistors (HFETs) with a high-AlN-mole-fraction Al0.72Ga0.28N channel grown on a single-crystal AlN substrate by metalorganic chemical vapor deposition. Material evaluation results confirmed that the grown AlGaN layer was 100% coherently grown for the underlying AlN substrate and thereby had superior crystal quality as well as the substrate. The fabricated AlGaN-channel HFETs with a gate length of 2 μm exhibited pinch-off characteristics with the max. current density (I DS_MAX) of 21 mA mm−1, the on-state resistance of 250 Ωmm, the peak transconductance of 4.5 mS mm−1 with the threshold voltage of –4.6 V, and the on/off ratio of 4 × 10−5. The temperature dependence of DC characteristics confirmed that the I DS_MAX decreased by 15% and the off-leakage current increased from 60 nA mm−1 to 10 μA mm−1 within the temperature range from room temperature to 200 °C.

Synthesis, characterization, and optical sensing of hydrophilic anodic alumina films

Herein, the anodization of 2.6 μm Al-0.2 at. % Cu (Al-0.2Cu) films on TiN/p-type Si substrate were performed using common acidic mediums at different ranges of anodization voltage () to produce porous anodic alumina (PAA) nanostructures with high porosity. The anodization of Al-0.2Cu in 1 M H2SO4 at range of 10-30 V produced a higher oxide thickness, and hence, a higher volume expansion factor, compared to the anodization in 0.75 M H3PO4 at Va range of 100-140 V. The increase in Va, as expected, increases the inter-pore distance, pore size, and porosity of the PAA and improves the anodization rate. The optical sensing performance of the synthesized PAA under different conditions was investigated. The maximum surface wettability was attained for PAA anodized in 1 M H2SO4 at 20 and 30 V. Moreover, the Vickers hardness (HV) of PAA was improved by forming a thin alumina layer on the Al-0.2Cu surface, and the anodized Al-0.2Cu in 0.3 M C2H2O4 revealed the highest HV compared to other acids. The synthesized PAA was tested as an optical sensor for some liquids by monitoring the refractive index. The synthesized PAA structure demonstrated a sensitivity of 180 nm/RIU. The anodization of Al-0.2Cu films using a one-step anodization process in different acidic mediums, and the resulting multifunctional properties (improved hardness, tunable wettability, and competitive sensitivity) existing a novel and potentially impactful approach.

Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

The brittle response of transparent spinel ceramics to contact damage is limiting their application as an alternative to glasses and single crystals. In this work, we explore a strategy to enhance the contact damage resistance of spinel ceramics by embedding alumina layers in a multi-layer architecture. Crack initiation upon Hertzian indentation was investigated in MgAl2O4 – Al2O3 laminates and compared to their corresponding monoliths. Contact stresses during loading were analyzed using finite element simulations by considering the elastic properties of the layers and contact non-linearities. Results were analyzed using Weibull statistics. It was found that the effect of in-plane residual stresses on crack formation in the laminate depends on the disposition of the compressive spinel layers, either at the surface or embedded in the structure. Embedding alumina between spinel layers increased the load-bearing capability before crack initiation by ~70% compared to spinel, offering a promising approach to enhance contact damage resistance.

An Experimental Investigations on Design and Weight Optimization for a Light Motor Vehicle (LMV) Drive Shaft Using a Composite Material Aluminum and Glass Fiber (Al + GF)

Aluminum is primarily used in Metal Composites because of its lighter weight and higher strength. Glass fibers are wound around an aluminum shaft to create the composite. ANSYS results determine the relative amounts of aluminum and Eglass fiber in each shaft. The purpose of this study is to use a torsion test to evaluate the mechanical performance of a composite shaft composed of aluminum and glass fiber. The results are carefully examined for different combinations of glass fiber layers and aluminum layers. When the weight proportion of aluminum in the composite increases, the mechanical properties of the composites improve.

Multianalyte Detection with Metasurface-Based Midinfrared Microspectrometer.

Midinfrared (2.5-25 μm) spectroscopy is an ideal tool for identifying chemicals in a nondestructive manner. The traditional platform is a Fourier transform infrared (FTIR) spectrometer, but this is too bulky, expensive, and power-hungry for many applications. There is therefore a growing demand for small, lightweight, and cost-effective microspectrometers for use in the field. One emerging platform is the filter-array detector-array microspectrometer. It pairs a broadband detector array with a thin and rigid array of spectral filters to offer a robust, compact platform for real-time in situ sensing. However, most demonstrations have only focused on identifying a single chemical against a null sample, even though many applications would involve multianalyte detection. In this work, we show a rare attempt at simultaneously tracking multiple analytes with a metasurface filter-array microspectrometer. The metasurface consists of periodic lattices of subwavelength circular apertures in an aluminum layer to create an array of bandpass filters. The filter array is imaged with an off-the-shelf microbolometer via a reverse-lens imaging setup to simultaneously monitor the concentration of ethanol and methanol in gasoline. This represents an important application of fuel quality monitoring. Chemometric models (PLS and SVR) are trained and tested on gasoline blends with ethanol and methanol contents, both ranging from 0% to 20% v/v. A support vector machine regression (SVR) model with a cubic kernel was found to have the lowest combined prediction errors. The root-mean-square-error of prediction (RMSEP) for ethanol and methanol are 1.23% and 1.84% v/v; the corresponding pseudounivariate limit of detection is found to be 4.22% and 6.86% v/v, respectively. This work takes the emerging field of metasurface-based mid-infrared spectrometers from single- to multianalyte detection, thereby considerably expanding their range of potential applications.

Nanostructures/TiN layer/Al2O3 layer/TiN substrate configuration-based high-performance refractory metasurface solar absorber

Metasurface solar absorber serves as a kind of important component for green energy devices to convert solar electromagnetic waves into thermal energy. In this work, we design a new solar light absorber configuration that incorporates the titanium nitride substrate, aluminum oxide layer, titanium nitride layer, and the topmost refractory nanostructures. The metasurface absorber based on this configuration can achieve an average spectral absorption of over 91% and a total solar radiation absorption of 91.5% at ultra-wide wavelengths of 300–2500 nm. It is discovered that the excellent performance of the proposed metasurface absorber is attributed to the synergistic effects of surface plasmonic effect and Fabry–Pérot (FP) cavity resonance by comprehensive analysis of the simulated field distributions. Furthermore, the effect of geometrical parameter of the proposed configuration on absorber performance is studied, indicating the proposed configuration possesses a large fabrication tolerance. Moreover, the proposed configuration is not sensitive to the polarization direction and the angle of incident light. It is also found that the use of other refractory metal materials and other shapes as the topmost absorbent nanostructures also have good results with this configuration. This work can offer a universal platform for constructing and guiding the design of refractory metasurface solar absorbers.

Interlayer growth of magnetic nanocomponent in Ti3C2Tx MXene EMW absorbers for periodic electromagnetic synergetic network

Transition metal carbides/carbonitrides (MXene) exhibit huge potential as electromagnetic wave (EMW) absorbers in dealing with electromagnetic radiation problem that rise due to the rapid development of 5G era. The incorporation of magnetic materials can effectively mitigate the impedance mismatch and singular loss mechanisms inherent in pure MXenes (PMs). However, challenges persist due to issues such as random distribution, complex preparation processes, and inadequate interaction. In this study, Ti3C2Tx/Ni hybrids were synthesized using a one-pot method, wherein Ni, derived from molten salt, replaces Al layer of MXene, facilitating the in-situ growth of Ni nanocomponents within the interlayered region. The periodic electromagnetic synergetic network of “MXene-Ni-MXene-Ni-MXene” provides substantial magnetic resonance, eddy current loss, interface polarization, defect polarization, and dipole polarization, enriching the loss mechanism. By regulating the concentration of Ni, the intrinsic poor impedance matching of MXene was improved. Consequently, Ti3C2Tx/Ni hybrid exhibited exceptional electromagnetic wave absorption (EMA) performance, achieving a reflection loss (RL) of −64.51 dB and an effective absorption bandwidth (EAB) of 4.96 GHz at a matching thickness of 1.98 mm. Additionally, the super radar cross-section (RCS value = −15.73 dB m2) endow it potential in practical application. This work provides a facile method for achieving unique electromagnetic synergetic loss mechanism, thus paving the way for exploring high-efficient MXene-based EMW absorbers.

Low Thermal Resistance of Diamond‐AlGaN Interfaces Achieved Using Carbide Interlayers

AbstractThis study investigates thermal transport across nanocrystalline diamond/AlGaN (aluminum gallium nitride) interfaces, crucial for enhancing thermal management in AlGaN‐based electronic devices. Chemical vapor deposition growth of diamond directly on AlGaN resulted in a disordered interface with a high thermal boundary resistance (TBR) of 20.6 m2‐KGW−1. Sputtered carbide interlayers of boron carbide (B4C), silicon carbide (SiC), and a mixture of boron carbide and silicon carbide (B4C/SiC) are employed to reduce thermal boundary resistance in diamond/AlGaN interfaces. The carbide interlayers resulted in record‐low thermal boundary resistance values of 3.4 and 3.7 m2‐KGW−1 for Al0.65Ga0.35N samples with B4C and SiC interlayers, respectively. STEM imaging of the interface reveals interlayer thicknesses between 1.7 and 2.5 nm, with an amorphous structure. Additionally, Fast‐Fourier Transform (FFT) characterization of sections of the STEM images displayed sharp crystalline fringes in the AlGaN layer, confirming it is properly protected from damage from hydrogen plasma during the diamond growth. In order to accurately measure the thermal boundary resistance we develop a hybrid technique, combining time‐domain thermoreflectance and steady‐state thermoreflectance fitting, offering superior sensitivity to buried thermal resistances. The findings underscore the efficacy of interlayer engineering in enhancing thermal transport and demonstrate the importance of innovative measurement techniques in accurately characterizing complex thermal interfaces. This study provides a foundation for future research in improving thermal properties of semiconductor devices through interface engineering and advanced measurement methodologies.

Tuning the geometry of porous alumina layers via anodization in mixtures of different acids

AbstractPorous anodic aluminum oxide (AAO) layers have been obtained by two-step anodization of high-purity Al in two types of acid mixtures, i.e., in H2C2O4–H3PO4 and, for the first time, in H2SO4–H3PO4 systems. The kinetics of oxide formation was examined by monitoring the current vs. time curves while the morphology of the resulting layers was carefully verified by scanning electron microscopy (SEM). A special emphasis was put on establishing correlations between electrolyte composition, the kinetics and effectiveness of oxide growth, and the morphological features of AAO layers (pore and cell diameter, porosity), as well as pore arrangement. It was confirmed that the addition of H3PO4 to both H2C2O4 and H2SO4 electrolytes results in a significant decrease in oxide growth rate, and worsening of pore arrangement, while the values of pore diameter and interpore distance are much less affected. Moreover, the presence of a small amount of phosphoric acid in the reaction mixture allowed for a noticeable increase in pore ordering if anodization was carried out beyond the self-ordering regime, or performing controlled anodization even at voltages at which the burning phenomenon is typically observed. It is strongly believed that manipulating the electrolyte composition by adding another acid may provide another degree of freedom to control the morphology of the resulting nanostructured alumina layers.

Investigation on barrier layers of Pt/BaTiO3/Pt based thin film capacitors

Barium titanate is a ferroelectric material used as a dielectric in thin film capacitors owing to its high dielectric constant. Barrier layers are utilized in these capacitors to improve the capacitors' performance. In this paper, zinc oxide and aluminium oxide are kept on both sides of BaTiO3 as barrier layers in Pt/BT/Pt capacitors and different dielectric properties are studied. The parameters such as capacitance density, leakage current, ESR, dielectric loss and dielectric strength of Pt/BT/Pt capacitors with barrier layers of different sizes are simulated using COMSOL Multiphysics modeling software. Aluminum oxide of 2 nm thickness as a barrier layer gives optimal performance. The leakage current, dielectric loss, capacitance density, equivalent series resistance and dielectric strength of Pt/BT/Pt capacitor are found to be 0.519 mA, 9.62x10‐12, 172.8 fF/µm2, 9.62 kΩ, 108 V/m respectively whereas that of Pt/ALO/BT/ALO/Pt capacitor are found to be 1.56x10‐18A, 7.81x10‐18, 11.6 fF/µm2, 9.01x1015 Ω, 5.05x109 V/m respectively. The low capacitance in Pt/ALO/BT/ALO/Pt capacitor is due to the low dielectric constant of Al2O3 layer. The reduced leakage current and increased equivalent series resistance is due to the low conductivity of the Al2O3 layer. The use of aluminium layer can reduce the electric field leading to improved dielectric strength.

Large Chiral Orbital Texture and Orbital Edelstein Effect in Co/Al Heterostructure.

Recent experiments by S. Krishnia et al. [Nano Lett. 2023, 23, 6785] reported an unprecedentedly large enhancement of torques upon inserting thin Al layer in Co/Pt heterostructure that suggested the presence of a Rashba-like interaction at the metallic Co/Al interface. Based on first-principles calculations, we reveal the emergence of a large helical orbital texture in reciprocal space at the interfacial Co layer, whose origin is attributed to the orbital Rashba effect due to the formation of the surface states at the Co/Al interface and where spin-orbit coupling is found to produce smaller contributions with a higher-order winding of the orbital moments. Our results unveil that the orbital texture gives rise to a nonequilibrium orbital accumulation producing large current-induced torques, thus providing an essential theoretical background for the experimental data and advancing the use of orbital transport phenomena in all-metallic magnetic systems with light elements.

Spectral and optic-metric methods of monitoring parameters of plasma channels caused by discharge currents between metals granules in working liquids

Introduction. Spark-erosion processing of metals and alloys granules in working liquids is the basis of a several technological processes. Efficiency of energy use in them and parameters of the resulting product largely depend on the accuracy of stabilization and regulation of pulse power in each plasma channel between the granules. To achieve this, until now only the voltage and current of the discharge pulses in the entire layer of granules have been controlled. Problem. The measurement methods, which are used, are not effective enough for monitoring the parameters of individual plasma channels and predicting the size distribution of eroded metals particles at the stage of their formation. The aim of the work is to develop a method for determining the volumes of components of plasma channels in layers of metals granules during their spark-erosion treatment to predict the size distribution of eroded metal particles at the stage of their formation, as well as to simplify the method of spectrometric analysis of the elemental composition of substances surrounding plasma channels for the operational prediction of the chemical composition of resulting products. Methodology. A series of experiments were carried out on spark-erosion processing of Al and Ag granules layers in distilled water. Using a digital camera, images of the plasma channels in them were obtained. Based on the theory of pulsed electrical breakdown of liquid dielectrics, an analysis of the components of plasma channels was carried out. Using the specialized ToupView program, the volumes of equivalent ellipsoids of rotation were determined, approximating the halos of colored radiation likely arising from streamers, as well as the spark cores of plasma channels emitting white light. The shades of the resulting radiation were studied for several metals and working liquids. The obtained data were compared with the known results of spectrometric studies for the same elements excited by similar mechanisms. Results. The theory of discharge-pulse systems for spark-erosion processing of granular conductive media has been developed in the direction of new methods for monitoring the parameters of discharge pulses and predicting the chemical composition and size distribution parameters of eroded metal particles at the stage of their production. An optic-metric method has been developed for determining the volumes of halos and cores of plasma channels. A simplified spectral method for determining the chemical composition of erosion particles based on the shade of the resulting radiation was proposed. Originality. The developed new optic-metric method makes it possible to obtain information about almost every plasma channel, which refines predictions of the size distribution of erosion particles. To implement the method, general-purpose hardware and specialized software that is freely available are used. The developed method of simplified spectral analysis of excited atoms makes it possible to make preliminary predictions of the chemical composition of the obtained erosion particles already at the stage of their formation without the use of expensive specialized equipment. Practical significance. The ratio of the volumes of halos and cores of plasma channels between Al and Ag granules in distilled water was measured. An analysis of the emission spectra of plasma channel halos between Al, Ag and Cu granules in distilled water, Fe in ethyl alcohol, Ni-Mn-Ga and Ti-Zr-Ni alloys in liquid nitrogen, and Ti-Zr-Ni in liquid argon was carried out. Based on spectrometry data, the resulting shades of these radiations were substantiated and their description in the RGB system is given. References 56, table 1, figures 4.

A Viability Study of Thermal Pre-Treatment for Recycling of Pharmaceutical Blisters

Pharmaceutical packaging is one of the most used packaging types which contains aluminum and plastics. Due to increasing amounts of waste and rising environmental concerns, recycling approaches are being investigated. Since blisters usually contain a balanced amount of plastics and metals, most of the approaches focus on recycling only one material. Therefore, more sustainable recycling approaches which recover both plastic and aluminum fractions are needed. This study investigates the thermal behavior and degradation mechanisms of plastic-rich and aluminum-rich pharmaceutical blisters using various analytical techniques. Structural characterization revealed that plastic-rich blisters have a thicker profile with plastic and aluminum layers, while aluminum-rich blisters consist of plastic layers between aluminum sheets. Thermal degradation analysis showed two main stages for both types: plastic-rich blisters (polyvinyl chloride) exhibited significant weight loss and long-chain hydrocarbon formation between 210 and 285 °C, and aluminum-rich blisters (polyamide/nylon) degraded from 240 to 270 °C. Differential Scanning Calorimetry and Fourier Transform Infrared Spectroscopy analyses confirmed the endothermic behavior of such a transformation. The gas emissions analysis indicated an increased formation of gasses from the thermal treatment of plastic-rich blisters, with the presence of oxygen leading to the formation of carbon dioxide, water, and carbon monoxide. Thermal treatment with 5%O2 in the carrier gas benefited plastic-rich blister treatment, reducing organic waste by up to 80% and minimizing burning risk, leveraging pyrolytic carbon for protection. This method is unsuitable for aluminum-rich blisters, requiring reduced oxygen or temperature to prevent pyrolytic carbon combustion and aluminum oxidation.