Air-liquid Interface System Research Articles

Development of a multi-analysis model using an epithelial-fibroblast co-culture system as an alternative to animal testing.

The evaluation of respiratory chemical substances has been mostly performed in animal tests (OECD TG 403, TG 412, TG 413, etc.). However, there have been ongoing discussions about the limited use of these inhalation toxicity tests due to differences in the anatomical structure of the respiratory tract, difficulty in exposure, laborious processes, and ethical reasons. Alternative animal testing methods that mimic in vivo testing are required. Therefore, in this study, we established a co-culture system composed of differentiated epithelial cells under an air-liquid interface (ALI) system in the apical part and fibroblasts in the basal part. This system was designed to mimic the wound-healing mechanism in the respiratory system. In addition, we developed a multi-analysis system that simultaneously performs toxicological and functional evaluations. Several individual assays were used sequentially in a multi-analysis model for pulmonary toxicity. Briefly, cytokine analysis, histology, and cilia motility were measured in the apical part, and cell migration and gel contraction assay were performed by exposing MRC-5 cells to the basal culture. First, human airway epithelial cells from bronchial (hAECB) were cultured under air-liquid interface (ALI) system conditions and validated pseudostratified epithelium by detecting differentiation-related epithelial markers using Transepithelial Electrical Resistance (TEER) measurement, Hematoxylin and Eosin (H&E) staining, and immunocytochemistry (ICC) staining. Afterward, the co-culture cells exposed to Transforming growth factor-beta 1 (TGF-β1), a key mediator of pulmonary fibrosis, induced significant toxicological responses such as cytotoxicity, cell migration, and gel contraction, which are wound-healing markers. In addition, cilia motility in epithelial cells was significantly decreased compared to control. Therefore, the multi-analysis model with a 3D epithelial-fibroblast co-culture system is expected to be useful in predicting pulmonary toxicity as a simple and efficient high-throughput screening method and as an alternative to animal testing.

Differential regulation of viral entry-associated genes modulated by inflammatory cytokines in the nasal epithelium.

This study aimed to investigate the impact of different types of nasal inflammation on the regulation of entry-associated genes of respiratory viruses, including severe acute respiratory syndrome coronavirus 2 (SARS CoV-2), Middle East respiratory syndrome coronavirus (MERS-CoV), human coronavirus 229E (HCoV-229E), and influenza virus, in the nasal epithelium. Subjects were classified into three groups: control, eosinophilic chronic rhinosinusitis (ECRS), and noneosinophilic CRS (NECRS) groups. Angiotensin-converting enzyme 2 (ACE2) and transmembrane protease serine subtype 2 (TMPRSS2), alanyl aminopeptidase (ANPEP), dipeptidyl peptidase 4 (DPP4), and beta-galactoside alpha-2,6-sialyltransferase 1 (ST6GAL1), and beta-galactoside alpha-2,3-sialyltransferase 4 (ST3GAL4) were selected as key entry-associated genes for SARS-CoV-2, HCoV-229E, MERS-CoV, and influenza, respectively, and were evaluated. Brushing samples obtained from each group and human nasal epithelial cells cultured using an air-liquid interface system were treated for 7 days with typical inflammatory cytokines and analyzed using real-time polymerase chain reaction. Western blot analysis and confocal microscopy were performed. The entry-associated genes showed distinct regulation patterns in response to each interleukin-4 (IL-4), interleukin-13 (IL-13), tumor necrosis factor-α (TNF-α), and interferon-γ (IFN-γ). Specifically, ACE2 significantly decreased in type 2 cytokines (IL-4 and IL-13), while TMPRSS2 significantly decreased in type 1 cytokines (TNF-α and IFN-γ). ANPEP significantly decreased in both types of cytokines. Remarkably, DPP4 significantly increased in type 2 cytokines and decreased in type 1 cytokines. Moreover, ST6GAL1 and ST3GAL4 significantly increased in type 2 cytokines and decreased in type 1 cytokines, particularly IFN-γ. These findings were supported by western blot analysis and confocal imaging results, especially for ACE2 and DPP4. The findings regarding differential regulation suggest that patients with ECRS, primarily mediated by type 2 inflammation, may have lower susceptibility to SARS-CoV-2 and HCoV-229E infections but higher susceptibility to MERS-CoV and influenza infections.

Discovery of novel arylpyridine derivatives for motile ciliogenesis

Motile cilia are crucial for maintaining healthy bodily functions by facilitating fluid transport and removing foreign substances or debris from the body. The dysfunction of motile cilia leads to ciliopathy. In particular, damage to the motile cilia of the airways can cause or worsen respiratory disease, making it an attractive target for therapeutic interventions. However, there are no treatments to induce motile ciliogenesis. Forkhead box transcription factor J1 (FOXJ1), the master regulator, has been implicated in motile cilia formation. Mice lacking the Foxj1 gene show loss of axoneme, a key component of cilia, that further highlights the importance of FOXJ1 in motile cilia formation. This prompted us to identify new small molecules that could induce motile ciliogenesis. A phenotype-based high-throughput screening (HTS) in a Tg(foxj1a:eGFP) zebrafish model was performed and a novel hit compound was identified. Among the synthesized compounds, compound 16c effectively enhanced motile ciliogenesis in a transgenic zebrafish model. To further test the efficacy of compound 16c on a mammalian airway system consisting of multiciliated cells (MCCs), ex vivo mice tracheal epithelial cell culture was adopted under an air-liquid interface system (ALI). Compound 16c significantly increased the number of MCCs by enhancing motile ciliogenesis. In addition, compound 16c exhibited good liver microsomal stability, in vivo PK profiles with AUC, and oral bioavailability. There was no significant inhibition of CYP and hERG, and no cell cytotoxicity was shown. In an elastase-induced COPD (chronic obstructive pulmonary disease) mouse model, compound 16c effectively prevented the development and onset of COPD. Taken together, compound 16c has great promise as a therapeutic agent for treating and alleviating motile ciliopathies.

Development of anex vivo patient-derived tumor model (PDTM) to assess the tumor microenvironment in renal cell carcinoma (RCC)

Abstract Background With the rise of immune checkpoint inhibitors (ICIs) as the primary treatment option for metastatic RCC, investigating the role of T cells within the tumor microenvironment (TME) is a critical component of understanding both treatment response and resistance. Prior efforts, including single-cell transcriptomic approaches, have provided an important landscape of T cell transcriptional phenotypes. However, these immuno-profiling efforts require validation through functional interrogation of the TME to facilitate the development of novel immunomodulatory therapies. Thus, we established a patient derived tumor model (PDTM) system to directly assess the effect of inhibitory immune interactions on T cell function and anti-tumor activity in the RCC TME. In this initial proof-of-concept study, we evaluated T cell activation in the RCC TME using the PDTM system. Methods Fresh tumor samples were obtained from surgical resections of RCC at Yale-New Haven Hospital. The tumor was minced to ~1-3 mm³ pieces and suspended in an air-liquid interface system, consisting of tumor fragments embedded in a collagen matrix on an insert with a semi-permeable membrane, exposed to culture media. The tumor fragment and matrix suspension were carefully pipetted onto the Millicell insert, which served as the top layer. The PDTM setup includes an inner dish containing the bottom gel layer and the tissue-containing top layer. To complete the assembly, 1.5 ml of DMEM media with or without an anti-CD3 monoclonal antibody (aCD3mAb) and 500 nM of anti-PD-1 monoclonal antibody (aPD1mAb) was added to the outer dish surrounding the insert. Results We successfully optimized PDTM experimental workflows for culture, dissociation, and analysis using immunohistochemistry (IHC), flow cytometry (FCM), and enzyme-linked immunosorbent assays (ELISA). Hematoxylin and eosin (H&E) staining and IHC showed that the TME cellular architecture and immune cell composition was broadly preserved during the three day experimental period. Using FCM to analyze the dissociated tumor samples, we identified well-preserved CA9+ tumor cells, CD4+ and CD8+ T cell populations, CD4+CD25+ regulatory T cells, CD56+ natural killer cells, CD20+ B cells, and CD14+CD11b+ myeloid subsets including monocytes and CD163-/+macrophages. Among the T cells, we detected PD1+, LAG3+, TIM3+, and TIGIT+ cells. For dose-response analysis of aCD3mAb, we observed that stimulation with 0.025 ng/mL aCD3mAb for T cells from healthy donor peripheral blood mononuclear cells (PBMCs) yielded significant but non-saturating levels of interferon gamma (IFN-γ) production as quantified by ELISA. We tested the effect of the anti-PD-1 antibody on PDTM under the low-dose of aCD3mAb, and importantly, found that treatment of the PDTM with aPD1mAb resulted in more activated CD8 T cells and higher IFN-γ production than the control samples. Conclusions Through optimization of assays evaluating T cell cytokine production, we were able to assess multiple axes of T-cell function in the RCC TME. This study revealed that our PDTM system preserves the RCC TME for functional interrogation. Furthermore, our system for assessing T cell phenotype and cytokine production successfully demonstrated the activity of PD-1 blockade ex vivo. Taken together, this novel ex vivo PDTM system has extensive applications in the study of RCC, including assessing the impact of ICIs on T cell function. DOD CDMRP Funding: yes

Revolutionizing respiratory health research: “commercially-available lung-on-a-chip and air-liquid interface systems”

Inhalation of ultrafine particles, aerosol contaminants, and cigarette smoke can induce respiratory diseases. As humans are constantly exposed to various exogenous substances, it is crucial to study their impacts on respiratory diseases and airway dysfunction. Recently, organ-on-a-chip technology has been applied in many research studies to understand disease mechanisms, drug screening, and drug testing. The combination of organ-on-a-chip technology and the air-liquid interface (ALI) culture method is emerging as a new platform for realistically mimicking the microenvironment and physiological motions of the human lungs. Breathing motion can be simulated through cyclic stretching, while blood flow can be replicated using channel flow within the chip. The ALI system is critical for mucociliary differentiation, pseudostratified morphology, and epithelial barrier function development. The combination of organ-on-a-chip technology and ALI systems allows the integration of cyclic stretch as a breathing motion and microfluidic channels as circulatory systems. The chip system can also integrate the lung epithelial cells, extracellular matrix, and microstructures, providing microenvironments such as fibroblast, collagen, and immune cells to the epithelial cells. This review discusses chip systems as effective tools for recapitulating human lung environments and how they are applied in biological studies against various pulmonary diseases such as infections or inflammation, fibrosis, and malignancy.

A single and short exposure to heated tobacco vapor or cigarette smoke affects macrophage activation and polarization

The toxicity of heated tobacco products (HTP) on the immune cells remains unclear. Here, U937-differentiated macrophages were exposed to a single and short-term exposure (30 minutes) of HTP vapor or cigarette smoke (CS) in an air-liquid interface (ALI) system to evaluate the effects on macrophages' early activation and polarization. In our system, HTP released lower amounts of polycyclic aromatic hydrocarbons (PAHs), but higher nicotine levels than CS into the cell culture supernatant. Both tobacco products triggered the expression of the α-7 nicotinic receptor (α7 nAChR) and reactive oxygen species (ROS) production. When challenged with a bacterial product, lipopolysaccharide (LPS), cells exposed to HTP or CS failed to respond properly and enhance ROS production upon LPS stimuli. Furthermore, both tobacco products also impaired bacterial phagocytosis and the exposures triggered higher IL-1β secretion. The α7 nAChR antagonist treatment rescued the effects caused only by HTP exposure. The CS-exposed group switched macrophage to the pro-inflammatory M1, while HTP polarized to the suppressive M2 profile. Associated, data highlight that HTP and CS exposures similarly activate macrophages; nonetheless, the α7 nAChR pathway is only involved in HTP actions, and the distinct subsequent polarization caused by HTP or CS may influence the outcome of host defense.

Modeling airway persistent infection of Moraxella catarrhalis and nontypeable Haemophilus influenzae by using human in vitro models.

Non-typeable Haemophilus influenzae (NTHi) and Moraxella catarrhalis (Mcat) are two common respiratory tract pathogens often associated with acute exacerbations in Chronic Obstructive Pulmonary Disease (COPD) as well as with otitis media (OM) in children. Although there is evidence that these pathogens can adopt persistence mechanisms such as biofilm formation, the precise means through which they contribute to disease severity and chronicity remains incompletely understood, posing challenges for their effective eradication. The identification of potential vaccine candidates frequently entails the characterization of the host-pathogen interplay in vitro even though this approach is limited by the fact that conventional models do not permit long term bacterial infections. In the present work, by using air-liquid-interface (ALI) human airway in vitro models, we aimed to recreate COPD-related persistent bacterial infections. In particular, we explored an alternative use of the ALI system consisting in the assembly of an inverted epithelium grown on the basal part of a transwell membrane with the aim to enable the functionality of natural defense mechanisms such as mucociliary clearance and cellular extrusion that are usually hampered during conventional ALI infection experiments. The inversion of the epithelium did not affect tissue differentiation and considerably delayed NTHi or Mcat infection progression, allowing one to monitor host-pathogen interactions for up to three weeks. Notably, the use of these models, coupled with confocal and transmission electron microscopy, revealed unique features associated with NTHi and Mcat infection, highlighting persistence strategies including the formation of intracellular bacterial communities (IBCs) and surface-associated biofilm-like structures. Overall, this study demonstrates the possibility to perform long term host-pathogen investigations in vitro with the aim to define persistence mechanisms adopted by respiratory pathogens and individuate potential new vaccine targets.

Multidimensional assessment of the biological effects of electronic cigarettes on lung bronchial epithelial cells

Cigarette smoke (CS) exposure is known to cause injury to respiratory tract epithelial cells and is a contributing factor in the development of chronic obstructive pulmonary disease and lung cancer. Electronic cigarettes (e-cigarettes) are gaining popularity as a potential substitute for conventional cigarettes due to their potential for aiding smoking cessation. However, the safety of e-cigarettes remains uncertain, and scientific evidence on this topic is still limited. In this study, we aimed to investigate the effects of CS and e-cigarette smoke (ECS) of different flavors on human lung bronchial epithelial cells. Real-time smoke exposure was carried out using an air–liquid interface system, and cell viability was assessed. RNA-Seq transcriptome analysis was performed to compare the differences between CS and ECS. The transcriptome analysis revealed a significantly higher number of differentially expressed genes in CS than in ECS. Moreover, the impact of mint-flavored e-cigarettes on cells was found to be greater than that of tobacco-flavored e-cigarettes, as evidenced by the greater number of differentially expressed genes. These findings provide a reference for future safety research on traditional cigarettes and e-cigarettes, particularly those of different flavors. The use of omics-scale methodologies has improved our ability to understand the biological effects of CS and ECS on human respiratory tract epithelial cells, which can aid in the development of novel approaches for smoking cessation and lung disease prevention.

In vitro toxicological evaluation of aerosols generated by a 4th generation vaping device using nicotine salts in an air-liquid interface system

BackgroundElectronic cigarettes (EC) have gained popularity, especially among young people, with the introduction of fourth-generation devices based on e-liquids containing nicotine salts that promise a smoother vaping experience than freebase nicotine. However, the toxicological effects of nicotine salts are still largely unknown, and the chemical diversity of e-liquids limits the comparison between different studies to determine the contribution of each compound to the cytotoxicity of EC aerosols. Therefore, the aim of this study was to evaluate the toxicological profile of controlled composition e-liquid aerosols to accurately determine the effects of each ingredient based on exposure at the air-liquid interface.MethodsHuman lung epithelial cells (A549) were exposed to undiluted aerosols of controlled composition e-liquids containing various ratios of propylene glycol (PG)/vegetable glycerin (VG) solvents, freebase nicotine, organic acids, nicotine salts, and flavoured commercial e-liquids. Exposure of 20 puffs was performed at the air-liquid interface following a standard vaping regimen. Toxicological outcomes, including cytotoxicity, inflammation, and oxidative stress, were assessed 24 h after exposure.ResultsPG/VG aerosols elicited a strong cytotoxic response characterised by a 50% decrease in cell viability and a 200% increase in lactate dehydrogenase (LDH) production, but had no effects on inflammation and oxidative stress. These effects occurred only at a ratio of 70/30 PG/VG, suggesting that PG is the major contributor to aerosol cytotoxicity. Both freebase nicotine and organic acids had no greater effect on cell viability and LDH release than at a 70/30 PG/VG ratio, but significantly increased inflammation and oxidative stress. Interestingly, the protonated form of nicotine in salt showed a stronger proinflammatory effect than the freebase nicotine form, while benzoic acid-based nicotine salts also induced significant oxidative stress. Flavoured commercial e-liquids was found to be cytotoxic at a threshold dose of ≈ 330 µg/cm².ConclusionOur results showed that aerosols of e-liquids consisting only of PG/VG solvents can cause severe cytotoxicity depending on the concentration of PG, while nicotine salts elicit a stronger pro-inflammatory response than freebase nicotine. Overall, aerosols from fourth-generation devices can cause different toxicological effects, the nature of which depends on the chemical composition of the e-liquid.

A gel-coated air-liquid-interface culture system with tunable substrate stiffness matching healthy and diseased lung tissues.

Since its invention in the late 1980s, the air-liquid-interface (ALI) culture system has been the standard in vitro model for studying human airway biology and pulmonary diseases. However, in a conventional ALI system, cells are cultured on a porous plastic membrane that is much stiffer than human airway tissues. Here, we develop a gel-ALI culture system by simply coating the plastic membrane with a thin layer of hydrogel with tunable stiffness matching that of healthy and fibrotic airway tissues. We determine the optimum gel thickness that does not impair the transport of nutrients and biomolecules essential to cell growth. We show that the gel-ALI system allows human bronchial epithelial cells (HBECs) to proliferate and differentiate into pseudostratified epithelium. Furthermore, we discover that HBECs migrate significantly faster on hydrogel substrates with stiffness matching that of fibrotic lung tissues, highlighting the importance of mechanical cues in human airway remodeling. The developed gel-ALI system provides a facile approach to studying the effects of mechanical cues in human airway biology and in modeling pulmonary diseases.NEW & NOTEWORTHY In a conventional ALI system, cells are cultured on a plastic membrane that is much stiffer than human airway tissues. We develop a gel-ALI system by coating the plastic membrane with a thin layer of hydrogel with tunable stiffness matching that of healthy and fibrotic airway tissues. We discover that human bronchial epithelial cells migrate significantly faster on hydrogel substrates with pathological stiffness, highlighting the importance of mechanical cues in human airway remodeling.

Effect of air-liquid interface on cultured human intestinal epithelial cells.

The intestinal epithelium is a dynamic barrier that allows the selective exchange of ions, hormones, proteins, and nutrients. To accomplish this, the intestinal epithelium adopts a highly columnar morphology which is partially lost in submerged culturing systems. To achieve this, small intestinal tissue samples were utilized to obtain human intestinal crypts to form enteroids. The Transwell system was subsequently employed to form a monolayer of cells that was cultured in either the submerged condition or the air-liquid Interface (ALI) condition. We found that the human intestinal monolayer under the ALI condition exhibited morphology more similar to the normal intestinal epithelium. F-actin localization and brush border formation were observed apically, and the integrity of the tight junctions was preserved in the ALI condition. Fewer apoptotic cells were observed in the ALI conditions as compared to the submerged conditions. The monolayer of cells expressed a higher level of secretory cell lineage genes in the ALI condition. The ALI condition positively contributes toward a more differentiated phenotype of epithelial cells. It serves as an amplifier that enhances the existing differentiation cue. The ALI system provides a more differentiated platform to study intestinal function compared to submerged conditions.

Cytotoxicity and Characterization of Ultrafine Particles from Desktop Three-Dimensional Printers with Multiple Filaments.

Previous research has indicated that ultrafine particles (UFPs, particles less than 100 nm) emitted from desktop three-dimensional (3D) printers exhibit cytotoxicity. However, only a limited number of particles from different filaments and their combinations have been tested for cytotoxicity. This study quantified the emissions of UFPs from a commercially available filament extrusion desktop 3D printer using three different filaments, including acrylonitrile butadiene Styrene (ABS), thermoplastic polyurethane (TPU), and polyethylene terephthalate glycol (PETG). In this study, controlled experiments were conducted where the particles emitted were used to expose cells grown in an air-liquid interface (ALI) system. The ALI exposures were utilized for in vitro characterization of particle mixtures, including UFPs from a 3D printer. Additionally, a lactate dehydrogenase (LDH) assay was used to evaluate the cytotoxic effects of these UFPs. A549 cells were exposed at the ALI to UFPs generated by an operational 3D printer for an average of 45 and 90 min. Twenty-four hours post-exposure, the cells were analyzed for percent cytotoxicity in a 24-well ALI insert (LDH assay). UFP exposure resulted in diminished cell viability, as evidenced by significantly increased LDH levels. The findings demonstrate that ABS has the most significant particle emission. ABS was the only filament that showed a significant difference compared to the high efficiency particulate arrestance (HEPA) following 90 min of exposure (p-value < 0.05). Both ABS and PETG exhibited a significant difference compared to the HEPA control after 45 min of exposure. A preliminary analysis of potential exposure to these products in a typical environment advises caution when operating multiple printer and filament combinations in poorly ventilated spaces or without combined gas and particle filtration systems.

Sarcomeric network analysis of ex vivo cultivated human atrial appendage tissue using super-resolution microscopy

Investigating native human cardiac tissue with preserved 3D macro- and microarchitecture is fundamental for clinical and basic research. Unfortunately, the low accessibility of the human myocardium continues to limit scientific progress. To overcome this issue, utilizing atrial appendages of the human heart may become highly beneficial. Atrial appendages are often removed during open-heart surgery and can be preserved ex vivo as living tissue with varying durability depending on the culture method. In this study, we prepared living thin myocardial slices from left atrial appendages that were cultured using an air-liquid interface system for overall 10 days. Metabolic activity of the cultured slices was assessed using a conventional methyl thiazolyl tetrazolium (MTT) assay. To monitor the structural integrity of cardiomyocytes within the tissue, we implemented our recently described super-resolution microscopy approach that allows both qualitative and quantitative in-depth evaluation of sarcomere network based on parameters such as overall sarcomere content, filament size and orientation. Additionally, expression of mRNAs coding for key structural and functional proteins was analyzed by real-time reverse transcription polymerase chain reaction (qRT-PCR). Our findings demonstrate highly significant disassembly of contractile apparatus represented by degradation of alpha -actinin filaments detected after three days in culture, while metabolic activity was constantly rising and remained high for up to seven days. However, gene expression of crucial cardiac markers strongly decreased after the first day in culture indicating an early destructive response to ex vivo conditions. Therefore, we suggest static cultivation of living myocardial slices derived from left atrial appendage and prepared according to our protocol only for short-termed experiments (e.g. medicinal drug testing), while introduction of electro-mechanical stimulation protocols may offer the possibility for long-term integrity of such constructs.

Not all vaping is the same: differential pulmonary effects of vaping cannabidiol versus nicotine

RationaleVaping has become a popular method of inhaling various psychoactive substances. While evaluating respiratory effects of vaping have primarily focused on nicotine-containing products, cannabidiol (CBD)-vaping is increasingly becoming popular. It...

Patient-derived organoids potentiate precision medicine in advanced clear cell renal cell carcinoma.

To investigate the role of patient-derived organoid (PDO) model in the precision medicine of advanced clear cell renal cell carcinoma (ccRCC), we retrospectively analyzed the clinical data of seven cases of ccRCC diagnosed by operation and pathology in Renji Hospital from September 2021 to September 2022. The seven patients were diagnosed with advanced ccRCC with or without remote metastasis. Cytoreductive and radical nephrectomy was performed respectively. To predict the response to immunotherapy and provide personalized medicine recommendation, a PDO model based on air-liquid interface system was established from the surgical resected tumor and subsequent drug screening was performed. Hematoxylin and eosin (H&E) staining and immunohistochemistry revealed that the PDO recapitulated the histological feature of parent tumor. Immunofluorescence staining identified that CD3+ T cells, SMA+ cancer associated fibroblasts, and CD31+ endothelial cells were preserved in PDO models. Fluorescence activated cell sorter (FACS) revealed an evidently increased ratio of CD8+/CD4+ T cells and apoptotic tumor cells in PDO treated with toripalimab than those treated with IgG4. The results showed that toripalimab is able to rescue the excessive death of CD8+ T cells by critically reversing the immune exhaustion state of ccRCC in PDO model. This research validated that PDO is a promising and faithful preclinical model for prediction of immunotherapy response in patients with ccRCC.

RETRACTED: Air-liquid interface cultivation of Navicula incerta using hollow fiber membranes

Microalgae cultivation in open ponds requires a large footprint, while most photobioreactors need improvement in the ratio of surface to volume and energy consumption. In this study, polyethersulfone (PES) and poly(vinylidene fluoride) (PVDF) hollow fiber membranes with a large surface area were rearranged into open-ended and dead-ended configurations to improve the air-liquid interface cultivation of Navicula incerta. N. incerta were successfully grown on the porous membrane surface with the nutrients circulating inside the lumen. Fourier-transform infrared spectra showed the accumulation of polysaccharides, proteins and humic acids. Hydrophilic polysaccharides reduced water contact angles on PES and PVDF membranes to 37.2 ± 2.6° and 55.7 ± 3.3°, respectively. However, the porosity of PES (80.1 ± 1.1%) and PVDF (61.3 ± 4.5%) membranes were not significantly affected even after cultivation and harvesting of N. incerta. Scanning electron images further confirmed that N. incerta, cell debris and extracellular organic matter accumulated on the membrane. With large pores and a hydrophobic surface, PVDF hollow fiber membranes offered a greater improvement in N. incerta cell growth rate compared to PES hollow fiber membranes despite using different configurations. In the dead-ended configuration, they even attained the greatest improvement in N. incerta growth rate, up to 54.0%. However, PES hollow fiber membranes only achieved improvement in harvesting efficiency within the range of 18.7–38.0% due to weak cell adhesion. PVDF hollow fiber membranes significantly promoted the growth of microalgae N. incerta through the air-liquid interface system, leading to potential applications in wastewater treatment.

Black carbon toxicity dependence on particle coating: Measurements with a novel cell exposure method

Black carbon (BC) is a component of ambient particulate matter which originates from incomplete combustion emissions. BC is regarded as an important short-lived climate forcer, and a significant public health hazard. These two concerns have made BC a focus in aerosol science. Even though, the toxicity of BC particles is well recognized, the mechanism of toxicity for BC as a part of the total gas and particle emission mixture from combustion is still largely unknown and studies concerning it are scarce. In the present study, using a novel thermophoresis-based air-liquid interface (ALI) in vitro exposure system, we studied the toxicity of combustion-generated aerosols containing high levels of BC, diluted to atmospheric levels (1 to 10 μg/m3). Applying multiple different aerosol treatments, we simulated different sources and atmospheric aging processes, and utilizing several toxicological endpoints, we thoroughly examined emission toxicity. Our results revealed that an organic coating on the BC particles increased the toxicity, which was seen as larger genotoxicity and immunosuppression. Furthermore, aging of the aerosol also increased its toxicity. A deeper statistical analysis of the results supported our initial conclusions and additionally revealed that toxicity increased with decreasing particle size. These findings regarding BC toxicity can be applied to support policies and technologies to reduce the most hazardous compositions of BC emissions. Additionally, our study showed that the thermophoretic ALI system is both a suitable and useful tool for toxicological studies of emission aerosols.

A dynamic air–liquid interface system for in vitro mimicking of the nasal mucosa

The development of an in vitro 3D model for the growth of the nasal mucosa cells can improve the therapy and the study of pathological states for subjects with chronic airway conditions. We have previously characterized a system consisting of a scaffold with an internal channel and a perfusion bioreactor with two independent flows provided by an external and an internal circuit, respectively. In this paper, this system was designed as a model of the nasal cavity, in which cells, grown on the inner surface of the scaffold channel, would be in contact at the same time with both culture medium, supplied by the external circuit, and air, provided with the internal flow. To ensure adequate nutrient supply to the cells in the scaffold channel, the radial diffusion of the culture medium through the porous matrix was evaluated first in qualitative and, then, in quantitative terms, demonstrating the capability of the system to control the value and direction of this flux. As a preliminary study, the culture of epithelial cells in the scaffold channel is also discussed in static, maintaining the air-liquid interface condition for up to 3 weeks. Despite minor abnormalities, such as a gap between cell layers and some detachments from the scaffold, the scaffold ensured cell survival and growth during the experimental time.

Establishing an air-liquid interface exposure system for exposure of lung cells to gases

Objective Growing interest in non-animal-based models has led to the development of devices to expose cells to airborne substances. Cells/tissues grown at the air-liquid interface (ALI) are more representative of lung cells/tissues in vivo compared to submerged cell cultures. Additionally, airborne exposures should allow for closer modeling of human lung toxicity. However, such exposures present technical challenges, including maintaining optimal cell health, and establishing consistent exposure monitoring and control. We aimed to establish a reliable system and procedures for cell exposures to gases at the ALI. Methods We tested and adapted a horizontal-flow ALI-exposure system to verify and optimize temperature, humidity/condensation, and control of atmosphere delivery. We measured temperature and relative humidity (RH) throughout the system, including at the outlet (surrogate measures) and at the well, and evaluated viability of lung epithelial A549 cells under control conditions. Exposure stability, dosimetry, and toxicity were tested using ozone. Results Temperatures measured directly above wells vs. outflow differed; using above-well temperature enabled determination of near-well RH. Under optimized conditions, the viability of A549 cells exposed to clean air (2 h) in the ALI system was unchanged from incubator-grown cells. In-well ozone levels, determined through reaction with potassium indigotrisulfonate, confirmed dosing. Cells exposed to 200 ppb ozone at the ALI presented reduced viability, while submerged cells did not. Conclusion Our results emphasize the importance of monitoring near-well conditions rather than relying on surrogate measures. Rigorous assessment of ALI exposure conditions led to procedures for reproducible exposure of cells to gases.

Dosing intact birch pollen grains at the air-liquid interface (ALI) to the immortalized human bronchial epithelial cell line BEAS-2B.

In real life, humans are exposed to whole pollen grains at the air epithelial barrier. We developed a system for in vitro dosing of whole pollen grains at the Air-Liquid Interface (ALI) and studied their effect on the immortalized human bronchial epithelial cell line BEAS-2B. Pollen are sticky and large particles. Dosing pollen needs resuspension of single particles rather than clusters, and subsequent transportation to the cells with little loss to the walls of the instrumentation i.e. in a straight line. To avoid high speed impacting insults to cells we chose sedimentation by gravity as a delivery step. Pollen was resuspended into single particles by pressured air. A pollen dispersion unit including PTFE coating of the walls and reduced air pressure limited impaction loss to the walls. The loss of pollen to the system was still about 40%. A linear dose effect curve resulted in 327-2834 pollen/cm2 (± 6.1%), the latter concentration being calculated as the amount deposited on epithelial cells on high pollen days. After whole pollen exposure, the largest differential gene expression at the transcriptomic level was late, about 7 hours after exposure. Inflammatory and response to stimulus related genes were up-regulated. We developed a whole pollen exposure air-liquid interface system (Pollen-ALI), in which cells can be gently and reliably dosed.