Surfactant Aggregates Research Articles

Difference in structural changes of surfactant aggregates near solid surface under shear flow versus those in the bulk.

In water, the nonionic surfactant pentaethylene glycol monododecyl ether (C12E5) forms multi-lamellar vesicles upon application of shear, attributed to buckling instability of the surfactant layers. In the standard setup for applying shear, a pair of solid substrates is moved in opposite directions, and a non-slip condition at the solid surface is assumed. Based on theoretical predictions, the effective viscosity of the fluid surrounding the membrane is modified in this process, and this confinement may affect membrane fluctuation. However, only a few studies have analyzed the structural changes near the substrate. From this viewpoint, the structural changes in surfactant aggregates near a solid substrate under the application of shear were investigated herein using neutron reflectometry (NR). By increasing the shear rate, shear thickening at a lower shear rate and shear thinning at a higher shear rate were observed, similar to that in the bulk. However, a discontinuous change in the lamellar structure accompanying the condensation of the surfactant was observed in the NR experiments. This study presents the first experimental evidence indicating that the ramping speed of shear rates governs the shear-induced structuring of surfactant aggregates near the surface.

Surface engineered novel cationic surfactants with enhanced surface adsorption for environmental applications

Gemini Cationic Surfactants (GCS) have garnered significant attention due to their distinctive molecular structure, featuring two hydrophilic head groups associated with a hydrophobic spacer. This distinctive configuration enables diverse applications across various fields. Hence, the current study introduces a novel series of GCSs, ethanediyl-1,2-bis[di(2-hydroxypropyl) alkylammonium] dibromide (Cn-C2-Cn[IsoPr(OH)2; n = 9, 12 and 14) and comprehensively explore their properties, highlighting their promising antimicrobial activity. The synthesis of GCSs was validated using 1H NMR and IR spectroscopy. Dynamic Light Scattering was employed to determine the dimensions of Gemini surfactant aggregates in aqueous solutions. Surface tension analysis determined critical concentrations of micelle (CMC), minimum surface area (Amin) and concentration of surface excess (Γmax). Physicochemical properties were assessed through conductivity and surface tension analyses in aqueous solutions. The CMC, Amin and Γmax values decrease as alkyl chain length extends. Surface tension data revealed strong adsorption of GCSs at interfaces. π values (mN/m) ranged from 36.7 (C14C2C14[Iso-Pr(OH)]2) to 45.3 (C9C2C9[Iso-Pr(OH)]2). Conductivity and surface tension measurements further characterized Gemini surfactants in aqueous environments at 298 K. The size of the micelle aggregates varied between C9C2C9[Iso-Pr(OH)]2 (1.2885 nm) and C14C2C14[Iso-Pr(OH)]2 (1.9210 nm), highlighting the impact of chain length on micelle size. Hence, the study highlights significant effect of the chain lengths on Gemini cationic surfactants’ self-assembly in dilute aqueous environments. Antimicrobial tests demonstrated significant activity of Cn-C2-Cn[IsoPr(OH)]2 GCSs at varying concentrations. Antimicrobial tests showed the significant antimicrobial potential of these GCS compounds, suggesting their potential and promising applications in medical, hygiene, environmental sanitation and advanced materials sectors.

Kinetics and dynamics of Gas-liquid separation and bubble generation in surfactant solutions: Role of bulk/interfacial properties and hydrodynamic conditions

Understanding the kinetics and dynamics of gas–liquid separation and bubble generation in surfactant solutions is important for many industrial applications. To explore the potential mechanisms affecting the physical properties (expansion ratio, bubble size, and foam stability) of foams and bubbles, the surface tension of the solution, including the equilibrium and dynamic properties, was investigated. Then, the morphology of the surfactant aggregates was explored by cryo-transmission electron microscopy (cryo-TEM). Based on these experimental results, the effects of various physical and chemical factors (including the relative concentration of surfactant, dynamic surface tension, surface coverage, surface elasticity, surface mobility, aggregate morphology, etc.) on the expansion ratio and bubble size were analysed to identify which “universal” parameters can explain the phenomenon for all aqueous solutions in the gas–liquid separation process. Research has shown that the morphology of aggregates in a solution largely determines the surface properties of the solution at 1.5 ms (surface tension, surface coverage, surface elasticity, and so on). These surface properties significantly affect the expansion ratio. However, no good correlation was found between bubble size and these surface properties because surfactant vesicles can directly affect bubble size. In addition, the liquid flow rate and gas–liquid ratio have a significant impact on the expansion ratio and bubble size. Ultimately, we found that the foam stability, bubble size, and expansion ration can be described by a simple linear relationship. Our research provides new opinions for further understanding the effects of bulk/interfacial properties and hydrodynamic conditions on the physical properties of bubbles in the gas–liquid separation process.

Y and ZSM-5 Hierarchical Zeolites Prepared Using a Surfactant-Mediated Strategy: Effect of the Treatment Conditions.

Diffusional limitations associated with zeolite microporous systems can be overcome by developing hierarchical zeolites, i.e., materials with a micro- and mesoporous framework. In this work, Y and ZSM-5 zeolites were modified using a surfactant-mediated hydrothermal alkaline method, with NaOH and cetyltrimethylammonium bromide (CTAB). For Y zeolite, after a mild acidic pretreatment, the effect of the NaOH+CTAB treatment time was investigated. For ZSM-5 zeolite, different concentrations of the base and acid solutions were tested in the two-step pretreatment preceding the hydrothermal treatment. The properties of the materials were studied with different physical-chemical techniques. Hierarchical Y zeolites were characterized by 3.3-5 nm pores formed during the alkaline treatment through the structure reconstruction around the surfactant aggregates. The effectiveness of the NaOH+CTAB treatment was highly dependent on the duration. For intermediate treatment times (6-12 h), both smaller and larger mesopores were also obtained. Hierarchical ZSM-5 zeolites showed a disordered mesoporosity, mainly resulting from the pretreatment rather than from the subsequent hydrothermal treatment. High mesoporosity was obtained when the concentration of the pretreating base solution was sufficiently high and that of the acid one was not excessive. Hierarchical materials can be obtained for both zeolite structures, but the pretreatment and treatment conditions must be tailored to the starting zeolite and the desired type of mesoporosity.

Interactions of clathrate hydrate promoters sodium dodecyl sulfate and tetrahydrofuran investigated using 1H diffusion nuclear magnetic resonance at hydrate-forming conditions.

Thermodynamic hydrate promoters and kinetic hydrate promoters can be used to reduce the P-T conditions for clathrate hydrate synthesis to decrease the nucleation induction time while increasing growth rates. Two commonly used promoters for hydrate research are tetrahydrofuran (THF) and sodium dodecyl sulfate (SDS), which can increase the overall hydrate promotion when used in tandem as compared to individually. There are several molecular theories regarding how SDS promotes hydrate growth. This study explores the micellular theory, for which hydrate formation depends on surfactant aggregates (micelles) at a critical micelle concentration (CMC) to increase the interfacial surface area. The micellular theory is the most investigated and criticized surfactant hydrate promotion theory. To address questions related to micellar behavior, this study investigates the intermolecular behavior between SDS and THF for the identification of micelles at hydrate-forming conditions. The systems explored contained THF at 3 and 5 wt. % with varying concentrations of SDS below and above the CMC. Several methods including a qualitative visual method, conductivity, interfacial tensiometry, 13C Liquid-state Nuclear Magnetic Resonance (NMR) spectroscopy, and 1H diffusion NMR spectroscopy were evaluated at temperatures below the Krafft point of SDS and above 0 °C. The presence of THF at low concentrations decreased the critical temperature for the formation of SDS micelles, where SDS is solubilized in THF/water solution at hydrate-forming temperatures without precipitation. The CMC of SDS was decreased significantly even at hydrate-forming conditions. Mixed surfactant-cosolvent micellular behavior of SDS in the presence of low concentrations of THF was confirmed at hydrate-forming conditions above 0 °C.

An inclusive comparison regarding aggregation of surface active ionic liquid and conventional surfactant with a cationic dye Acridine Red exposed in view of spectroscopic and theoretical study

The investigation was conducted on the interaction of acridine red (AR) with sodium dodecyl sulfate (SDS) and 1-butyl-3-methyl imidazolium octyl sulfate (BMImOS) in both premicellar and post micellar concentrations. The interaction between AR and room temperature ionic liquid (RTIL) 1-butyl-3-methyl imidazolium bromide (BMImBr) was studied to understand the effect of imidazolium cation on micellization. Spectroscopic experiments, such as UV–visible absorption spectroscopy, steady-state fluorescence spectroscopy, time-resolved fluorescence spectroscopy, and dynamic light scattering, have been introduced. Various important parameters like spectral shifts, anisotropy, and aggregation number have been determined spectroscopically. However, a fresh insight into density functional theory calculations has also been provided. The observed results have been explained in terms of the aggregation behavior of the amphiphiles. A prominent redshift accompanied by a change in intensity is observed in the presence of surfactant and SAIL. However, in the case of BMImBr, no such spectral shift has been observed; only a decrease in spectral intensity highlights the quenching ability of the imidazolium cation. Average lifetime also provides some additional information regarding the difference in the formation of aggregates by SDS and BMImOS, which is further established from particle size density obtained from DLS. The salt like role of 1-butyl-3-methyl imidazolium cation also has been logically explained by anisotropy measurement and the determination of aggregation number. Using Gauss View 5.0 and Gaussian 09 package, the energy of optimization of each set of amphiphiles along with dye has been determined to follow the interaction at the molecular level. TDDFT calculations have also been performed to determine the structure of HOMO and LUMO.

Formulation of nanoemulsion parijoto fruit extract (Medinilla Speciosa) with variation of tweens stabilizers.

Nanotechnology has substantial potential for development due to its ability to modify surface characteristics and particle size, facilitating enhanced absorption of functional food compounds and controlled release of active substances to mitigate adverse effects. Nanoemulsion, a stable colloidal system formed by blending oil, emulsifier, and water, was identified as nanotechnology with promising applications. However, investigations into the impact of surfactants on characteristic nanoemulsions need to be more varied. This research gap necessitated further exploration in the advancement of nanotechnology-based foods. The parijoto fruit (Medinilla speciosa), an indigenous plant species in Indonesia, has yet to undergo extensive scrutiny for its potential use as a functional and nutraceutical food. Anthocyanins, a principal compound in the parijoto fruit, had exhibited efficacy in reducing the risk of cardiovascular disease diabetes, demonstrating anti-inflammatory and antioxidant properties. This study aimed to investigate the characteristics of nanoemulsion formulations derived from parijoto fruit extract and to evaluate an optimum condition with various tween surfactants. The findings from this investigation could furnish valuable insights for the further advancement of anthocyanin nanoemulsions from parijoto fruit extract. The results comprised the characterization of nanoemulsion particle size, polydispersity index, ζ-potential, conductivity, pH, and viscosity. Through mathematical modeling and statistical methods, RSM optimizes nanoemulsion by examining the relationships and interactions between independent and response variables. Furthermore, the characterization of nanoemulsion encompassed ζ-potential, polydispersity, particle size, conductivity, pH, and viscosity. Elevated surfactant concentrations resulted in diminished particle sizes and more uniform size distribution, albeit reaching a plateau where surfactant aggregation and micelle formation ensued. Increased concentrations of surfactant type, concentration, and parijoto extract impacted the physical characteristics of nanoparticle size and polydispersity. The optimal process conditions for nanoemulsion consisting of the type of Tween used are Tween 80, Tween concentration of 12%, and parijoto fruit extract concentration of 7.5%, yielding a desirability value of 0.74, categorizing it as moderate.

Modulation of Triton X-100 Aqueous Micelle Interface by Ionic Liquid: A Molecular Level Interaction Studied by Time-resolved Fluorescence Spectroscopy

Background: Self-assembly structure is an important area of research for understanding biological systems, owing to its resemblance to the membrane structure of the phospholipid bilayer. In a self-assembly medium, chemical reactions and chemical or physical processes are dramatically different than the bulk phase. Understanding this process in synthesizing self-assembly structures may allow us to explore various biological processes occurring in cell membranes. Objective: The study aimed to understand water dynamics in the TX-100 micellar interface via steady state and a time-resolved fluorescence spectroscopy study. The objective was also to determine the two different ionic liquids (ILs), namely 1-butyl-3-methyl imidazolium tetrafluoroborate ([bmim][BF4]) and 1-decyl-3-methyl imidazolium tetrafluoroborate ([dmim][BF4]), inducing surfactant aggregation changes at the molecular level. Also, the focus was on determining the hydration and its dynamics at the palisade layer of TX-100 micelle in the presence of two different ionic liquids. Methods: Steady state and time-resolved fluorescence spectroscopy have been used to study TX-100 micellar systems. Employing time-resolved spectroscopy, two chemical dynamic processes, solvation dynamics and rotational relaxation dynamics, have been studied to investigate structural changes in TX100 by adding ILs. Solvation dynamics was studied by measuring the time-dependent Stokes shift of the fluorescent probe. From the Stokes shift, time-resolved emission spectra were constructed to quantify the solvation dynamics. Also, using the polarization properties of light, time-resolved anisotropy was constructed to explore the rotation relaxation of the probe molecule. Results: The absorption and emission spectra of C-153 in TX-100 were red-shifted in the presence of both the ILs. Also, the C-153 experienced faster solvation dynamics and rotational relaxation with the addition of both ILs. In our previous study, we observed a significantly increased rate of solvation dynamics with the addition of [bmim][BF4] (J. Phys. Chem. B, 115, 6957-6963) [38]. However, with the addition of the same amount of [dmim][BF4], the IL rate of solvation enhancement was more pronounced than with [bmim][BF4]. The faster solvation and rotational relaxation have been found to be associated with the penetration of more free water at the TX100 micellar stern layer, leading to increased fluidity of the micellar interface. Conclusion: Upon incorporating ILs in TX100 micelle, substantially faster solvation dynamics of water as well as rotational relaxation dynamics of C-153 have been observed. By decreasing surfactant aggregations, [bmim][BF4] ILs facilitated more water molecules approaching the TX-100 micellar phase. On the other hand, [dmim][BF4] ILs comprising mixed micelles induced even more free water molecules at the palisade layer, yielding faster solvation dynamics in comparison to pure TX-100 micelle or TX100 micelle + [bmim][BF4] ILs systems. Time-resolved anisotropy study has also supported the finding and strengthened the solvation dynamics observation.

Molecular interaction of human serum albumin with gemini surfactant, 1,6 bis (N,N-hexadecyl dimethyl ammonium) bromide: Influence of micelles and pH

The interaction between human seram albumin (HSA) and a cationic gemini (dimeric) surfactant, 1,6 bis (N,N-hexadecyl dimethyl ammonium) bromide (16–6-16) has been investigated. Various analytical techniques, including UV–vis spectroscopy, fluorescence spectroscopy, lifetime fluorescence measurement, circular dichroism (CD), and atomic force microscope (AFM), were employed to investigate these interaction studies. The experiments were conducted in aqueous environments at three distinct pH levels (viz., below (4.0), at (4.7), and above (7.0) the isoelectric point (IP)), as well as both above and below the critical micellar concentration (CMC) of the surfactant (16–6-16). In these experimental conditions, HSA experiences conformational changes, leading to unfolding and denaturation as a result of its interaction with the gemini surfactant molecules (16–6-16). The extent of these conformational changes is found to be associated with both the degree of surfactant partial intercalation and the characteristics (size and charge) of the surfactant aggregates formed. The AFM microscopy studies provide insights into the topographical structural alterations occurring above, at, and below the CMC. Molecular docking analysis further validates the interaction between the protein (HSA) and the gemini surfactant (16–6-16) at a molecular level.

Role of Alkyl Chain Length in Surfactant-Induced Precipitation of Reactive Brilliant Blue KN-R

To develop a cost-effective method for the effective removal of reactive brilliant blue KN-R (RBB KN-R) from wastewater, we investigated the interactions between RBB KN-R and three cationic surfactants with different alkyl chain lengths, namely dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyltrimethylammonium bromide (CTAB). Employing a conductivity analysis, surface tension analysis, ultraviolet-visible spectrophotometry, and molecular dynamics simulation, we ascertained that RBB KN-R formed a 1:1 molar ratio dye–surfactant complex with each surfactant through electrostatic attraction. Notably, an augmentation in alkyl chain length correlated with increased binding strength between RBB KN-R and the surfactant. The resulting dye–surfactant complex exhibited heightened surface activity, enabling interactions through hydrophobic forces to generate dye–surfactant aggregates when the molar ratio was below 1:1. Within these mixed aggregates, self-assembly of RBB KN-R molecules occurred, leading to the formation of dye aggregates. Due to the improved hydrophobicity with increased alkyl chain length, TTAB and CTAB could encapsulate dye aggregates within the mixed aggregates, but DTAB could not. The RBB KN-R aggregates tended to distribute on the surface of the RBB KN-R-DTAB mixed aggregates, resulting in low stability. Thus, at a DTAB concentration lower than CMC, insoluble particles readily formed and separated from surfactant aggregates at an RBB KN-R and DTAB molar ratio of 1:4. Analyzing the RBB KN-R precipitate through scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) and measuring the DTAB concentration in the supernate revealed that, at this molar ratio, all RBB KN-R precipitated from the dye–surfactant mixed solution, with only 7.5 ± 0.5% of DTAB present in the precipitate. Furthermore, the removal ratio of RBB KN-R reached nearly 100% within a pH range of 1.0 to 9.0 and standing time of 6 h. The salt type and concentration did not significantly affect the precipitation process. Therefore, this simultaneous achievement of successful RBB KN-R removal and effective separation from DTAB underscores the efficacy of the proposed approach.

Enhanced hydrogen sequestration through hydrogen foam generation with SDS Co-Injection in subsurface formations

Inherent obstacles of hydrogen injection encompass preferential channeling through larger pathways, hampering microscopic sweep efficiency within porous media. This work pioneers hydrogen foam generation via co-injection with aqueous sodium dodecyl sulfate (SDS) to enhance subsurface hydrogen trapping capacity. SDS addition substantially reduces hydrogen-water interfacial tension and enhances viscoelasticity. In contrast to robust hydrogen foam stability, CO2 foams display compromised integrity, stemming from surfactant aggregation and ensuing infiltration channels that permit aqueous phase CO2 dissolution. Hydrogen foams conversely sustain uniform surfactant films, forestalling hydrogen ingress into water. Synergetic microfluidic and pore-scale simulations visualise mechanisms underlying intensified hydrogen capture and mobility reduction attributed to deformation and flow resistance when traversing constricted pores. Introducing the amphiphilic SDS surfactant considerably promotes hydrogen adsorption through its hydrophobic tail. Core flooding experiments quantify over 2 times hydrogen storage ratio amplification with SDS relative to sole hydrogen injection. The framework contributes pragmatic strategies to harness high-efficiency hydrogen foam for scalable clean energy storage.

Surfactant-induced alterations in optoelectronic properties of perylene diimide dyes: modulating sensing responses in the aqueous environment.

The compartmentalization effect of microheterogeneous systems, like surfactant aggregates, showcases altered optoelectronic properties of a perylene diimide-based chromogenic dye (PDI-Ala) compared to bulk water. The relatively hydrophobic microenvironment, poor hydration, and exceptionally large local concentration of dye molecules in the confined environment affect their interaction with target analytes. This realization intrigued us to investigate if micellization can modify the sensing properties (selectivity, sensitivity, response kinetics, output signal, etc.) of the encapsulated dye molecules in the aqueous medium. Response comparisons of PDI-Ala to the ionic analyte (Fe3+) and biomolecule (heparin) in aqueous and surfactant-bound states highlighted significant variations. Fe3+ interaction exhibited a "turn-off" fluorescence response in a water medium, while surfactant-bound conditions triggered "turn-on" fluorescence, enhancing selectivity at the micelle-water interface. Conversely, the native probe showed no interaction with heparin in water but displayed a turn-on fluorescence response in cetyltrimethylammonium bromide (CTAB) micelles, indicating the transformation of a silent molecule into a turn-on fluorescence sensor. This study underscores the influence of micellar environments on dye molecules, altering the sensing responses and selectivity toward analytes, crucial for applications in understanding cellular pathways and toxicity mechanisms.

Vesicle-to-micelle transition in a double chain quaternary ammonium surfactant system: Interfacial behavior and molecular insights

Vesicles have emerged as promising drug carriers with excellent compatibility with cell membranes, holding immense potential for biomedical applications. While most reported micelle-to-vesicle transitions involve increasing surfactant or additive concentrations, the reverse vesicle-to-micelle transition remains less explored. In this study, we investigate the vesicle-to-micelle transition of hexyldimethyloctylammonium bromide (C6C8Br) using dynamic light scattering, transmission electron microscopy, and fluorescence spectroscopy. Tetradecyltrimethylammonium bromide (TTABr), a single-chain tetraalkylammonium surfactant with the same chain-length, is studied for comparison. Through the chemical trapping (CT) method, we explore the interfacial composition changes during the vesicle-to-micelle transition. Notably, C6C8Br exhibits a unique characteristic setting it apart from TTABr and other cationic surfactants. At lower concentration ranges, there is a simultaneous increase in interfacial molarities of water and bromide ions, signifying a decrease in interfacial headgroup molarity and surfactant molecule packing. Moreover, our dissipative particle dynamics (DPD) simulation results show that, as the surfactant concentration rises, the interior angle between surfactant chains widens, and the molecular configuration of C6C8Br approaches a straight line. These combined CT and DPD findings underscore the prominent role of steric effects arising from the rigidity of the double-chain. These effects become more pronounced at higher C6C8Br concentrations, leading to looser interfacial packing of surfactant monomers and driving the transition from vesicles to micelles. Interestingly, the breakage of vesicles was not observed when replacing the counterion of C6C8Br with acetate in C6C8Ac solutions. CT results suggest that the elevated interfacial acetate molarity may faciliate the compact packing of surfactant monomers and hinder vesicle-to-micelle transformation. Our study provides a molecular-level understanding of the vesicle-to-micelle transitions in C6C8Br solutions and establishes a theoretical basis for morphological control of surfactant aggregates.

A salt-induced smart and tough clean hydrofracturing fluid with superior high-temperature and high-salinity resistance

Hydraulic fracturing is an important technology to improve oil and gas productivity for reservoirs of both conventional and unconventional. To minimize reservoir damage during hydraulic fracturing, researchers have aimed to develop clean fracturing fluids based on viscoelastic surfactants (VESs); however, reduced efficiency at high temperature and high salinity limits their wider applications. Here, an ultra-long-chain cationic surfactant docosyl(trimethyl)azanium chloride (DCTAC) was proposed to prepare fracturing fluid in the presence of high content of various inorganic salts to address this problem. DCTAC shows excellent salt tolerance, forming a homogeneous solution in 22 % NaCl or 55 % CaCl2 at 60 °C, which is several times higher than that for previously reported VESs. Salt can induce DCTAC to form an entangled three-dimensional wormlike micelles network, imparting the bulk fluid excellent rheological properties. DCTAC-thickened fluids show good sand-carrying and gel-breaking performance, and they can resist a temperature of up to 140 °C and a salinity level of at least 16 × 104 mg‧L−1. Compared with previously reported clean fracturing fluids, DCTAC-thickened fluid shows superior high-temperature and high-salinity resistance. The mechanism is elaborated and discussed. The findings in this study are helpful to understand surfactant aggregates stability and assist the development of novel stable supramolecular nanostructures.

Effect of different counterions on the self-assembly structures and properties of imidazole based ionic liquids surfactant: A molecular dynamics study

Self-assembly of ionic liquids (ILs) in solution has attracted wide attention due to their potential applications in various fields. The nature of counterions, especially aromatic counterions, will significantly affect the aggregation and morphological properties of ILs surfactants. In this paper, molecular dynamics (MD) simulations are applied to study the influence of three organic and inorganic counterions (phenolate (PO−), benzoate (BZ−), and Cl−) on the micellar structure of imidazolium (C14mim+) based ILs surfactant in aqueous solutions. Three micelles all possess prolate shape. The PO−, BZ−, and Cl− ions hardly affect the orientation and length of hydrophobic chains in micellar interior. Hydration numbers and average radial density distributions analyses show that interactions between micelles and water molecules are different in studied micelles. Surrounding water molecules penetrate into the deepest region in [C14mim][Cl] micelle. However, adsorbed Cl− ions are mainly located on micellar surface, not penetrating into micellar interior. Due to the intrinsic hydrophobicity of organic ions, both PO− and BZ− ions enter into deeper positions in micelles. Unlike Cl− ions, there exist π-interactions between adsorbed PO− and BZ− ions themselves. One interesting finding is that adsorbed PO− and BZ− ions can make micelle radius (Rg) increase but make solvent accessible surface area (SASA) decrease. Conversely, adsorbed Cl− ions make both Rg and SASA increase. Three MD models for different C14mim+ based micelles are proposed.

Foam Stabilization by Surfactant/SiO2 Composite Nanofluids

This paper deals with the potential of aggregates of surfactant and SiO2 nanoparticles as foam stabilizers for practical applications. The effects of different chain lengths and concentrations of the cationic surfactant CnTAB on the performance of CnTAB–SiO2 nanofluids are examined to gain a comprehensive understanding of their ability to stabilize foam. The results indicate enhanced foam stability in the presence of SiO2 nanoparticles. These findings help to better understand foam stabilization and its potential in various industrial applications such as enhanced oil recovery and foam-based separation processes.

Effect of in situ mixed micellization of ester-functionalized gemini surfactant at different pHs on solubilization and cosolubilization of various polycyclic aromatic hydrocarbons of varying hydrophobicities

A pH controlled cleavability unfolds the 3-in-1 surfactant feature of an ester-bonded gemini surfactant, 2, 2’-[(oxybis (ethane-1,2-diyl))bis (oxy)]bis (N-hexadecyl-N,Ndimethyl-2-oxoethanaminium) dichloride (C16–C4O2–C16), by reinforcing in-situ mixed micellization between cleaved components at non-neutral pH (pH 3,12). The triplicity is assigned to two mixed-micelle variants at pH 3 and pH 12 besides the unhydrolyzed C16–C4O2–C16 at pH 7. The pH-controlled aggregation of such trichotomic surfactant dramatically enhances the micellar solubilization/cosolubilization of PAHs viz. naphthalene (Np), phenanthrene (Ph), pyrene (Py), perylene (Pe). The cosolubilization of binary/ternary PAH mixtures in such remarkable micellar assemblies at pH 3, 7 and 12 yields intriguing synergistic or antagonistic solubility outcomes correlated to PAH-PAH and PAH-micelle interactions. This study provides valuable insights into the potential applications of the ester-bonded gemini surfactant for the cosolubilization of undesirable hydrophobic compounds at natural sites having variable pH.

Structural Changes during Polymerization of Acrylamide in Semidilute Solutions of Wormlike Surfactant Micelles

The structure and rheological properties of aqueous solutions of the anionic surfactant potassium oleate and the water-soluble monomer acrylamide before and after radical polymerization have been studied. In the absence of monomer and in the presence of a low-molecular-weight salt, potassium oleate forms a network of long entangled cylindrical (wormlike) micelles. The addition of the monomer does not lead to a change in their cylindrical shape and radius, but it promotes the transformation of branched micelles into linear ones. The structure of surfactant aggregates changes significantly after polymerization: according to neutron scattering data, it becomes bicontinuous and its local geometry becomes lamellar. The coexistence of such a structure with polyacrylamide macromolecules in a semidilute solution leads to a significant synergistic increase in viscosity and elastic modulus.

The evolution of equilibrium poly(styrene sulfonate) and dodecyl trimethylammonium bromide supramolecular structure in dilute aqueous solution with increasing surfactant binding

HypothesisIn the last 20 years, it has been demonstrated that oppositely charged polyelectrolyte-surfactant (PE-S) mixtures are prone to forming kinetically arrested non-equilibrium aggregates, which are present in the prepared mixtures from rather low surfactant-to-polymer-repeat-unit ratios. Practically, this means that the PE-S mixtures used for the structural investigations of the formed PE-S complexes are typically a mixture of the primary PE-S complexes and large non-equilibrium aggregates of close to charge-neutral complexes. ExperimentsIn this work, we present a unique approach that allows the preparation of PE-S mixtures in the equilibrium one-phase region (surfactant binding β, is typically below 80%) without forming non-equilibrium aggregates. We used this method to prepare equilibrium, non-aggregated complexes of sodium poly(styrene sulfonate) (NaPSS, Mw = 17 kDa) and dodecyltrimethylammonium bromide (DTAB) (β = 10 – 70%) both in water and in an inert electrolyte (100 mM NaCl). The evolution of the complex structure was monitored by small-angle X-ray scattering (SAXS) as a function of increasing surfactant binding (β), and the measured scattering data were fitted by suitable structural models on an absolute scale where concentrations, compositions, and scattering contrasts calculated from molecular properties are used as restraints. FindingsWe could show that at low binding (β < 30%), the system is a mixture of bare polyelectrolyte coils and NaPSS-DTAB complexes containing a closed surfactant associates of low aggregation number wrapped by the polyelectrolyte chain. Once all polymer chains are occupied by a micelle-like surfactant aggregate, the aggregation number increases linearly with increasing surfactant chemical potential. Using the structural insight provided by the SAXS measurements, we could fit the experimental binding isotherm data with a physically coherent, simple thermodynamic model. Finally, we also compared the stoichiometric NaPSS-DTAB precipitate's structure with the equilibrium complexes' structure.

Study of the interaction between polyphenol, quercetin and three micelles with different electric charges in acidic and aqueous media

The interactions between the polyphenol quercetin, Q, with three surfactant aggregates with different electric charges named micelles, were studied in aqueous solutions with pH values 4.7 and 7.0, to determine the following parameters: critical micellar concentration (CMC), micelle size and binding constant of the complex (Q-Micelle) proposing interaction sites for the formation of the complex. The surfactants used were: hexadecyltrimethyl ammonium bromide (cationic surfactant), CTAB, sodium dodecyl sulfate (anionic surfactant), SDS, and triton X-100 (non-ionic surfactant), TX100, used as Q fluorescence promoters to determine the CMC. The CMC values of the above surfactants at pH 4.7 were: 0.80 ± 0.10, 1.39 ± 0.07 and 0.59 ± 0.05 mM respectively, being lower than those reported in the water. With dynamic light scattering measurements, the hydrodynamic diameters of each micelle were calculated resulting in values of: 2.4 ± 0.5, 5.0 ± 1.1 and 8.4 ± 4.3 nm at pH 4.7 and: 2.1 ± 0.4, 4.9 ± 1.1 and 11.5 ± 4.1 nm at pH 7.0 respectively. In addition, the binding constants of the complex (Q-Micelle) with 1:1 stoichiometry were calculated from emission fluorescence data giving Log K values: 2.94 ± 0.02, 2.54 ± 0.02, and 3.63 ± 0.05 M-1 respectively. Finally, from the experimental data by UV–Vis spectrophotometry, the change in the behavior of the Q spectrum upon the addition of each of the surfactants to the system was analyzed, showing a decrease in absorbance when SDS and TX100 were added in an acidic medium, as a consequence of the photo-instability of the drug, suggesting that Q interacts with the outside of these micelles and is not fully incorporated inside them.