Aggregation-induced Phosphorescence Research Articles

Enhanced TNT vapor sensing through a PMMA-mediated AIPE-active monocyclometalated iridium(III) complex: a leap towards real-time monitoring.

Based on the explosive nature and harmful effects of nitro-based explosive materials on living beings and the environment, it is extremely important to develop luminescence-based probe molecules for their detection with excellent selectivity and sensitivity. Two AIPE (aggregation-induced phosphorescence emission)-active iridium(III) complexes (M1 and M2) were developed for the sensitive detection of TNT in both contact and non-contact modes. The aggregate solutions of both complexes (M1 and M2 in THF/H2O, 1/9 by volume) detected TNT at the pico-molar (pM) level. These complexes showed greatly enhanced emission intensity while embedded in a PMMA(polymethyl methacrylate) matrix film. The amplified quantum efficiency, improved phosphorescence lifetime, and enhanced porous network of M2-PMMA composite helps to improve the sesitivity of TNT vapor detection. Interestingly, the sensitivity of the detection of TNT by the M2 complex was significantly improved (5-fold) in a PMMA-incorporated complex (CP) with an observed limit of detection (LOD) of 12.8 ppb. From the BET analysis of CP, it was observed that the mesoporous network of CP has an average pore diameter of 8.52 nm and a surface area of 2.03 m2 g-1. The porous network of CP assists in trapping TNT vapor in a polymeric network containing an electron-rich probe (iridium(III) complex, M2), which helps to effectively trap TNT, thus enhancing electronic communication. As a result, significant emission quenching was observed.

High-performance solution-deposited ambipolar Ir(III) complex phosphors with aggregation-induced phosphorescence enhancement behavior based on N-P=O resonant variation skeleton

Ir(III) complex phosphors with both ambipolar feature and aggregation-induced phosphorescence enhancement (AIPE) property are promising to furnish high electroluminescent performance for solution-deposited phosphorescent organic light-emitting diodes. However, the molecular design...

Regioisomers of Aromatic Thioethers with Aggregation‐Induced Phosphorescence

AbstractIn this contribution, we describe a library of nine different molecular asterisks, all based on aromatic thioethers. Here, the substitution patterns of the central core unit bearing two nitriles and the rotors featuring methoxy groups were permuted. In addition, the photophysical properties in the solid and aggregated state were investigated. X‐ray diffractometry confirmed the molecular structures. In this frame, the molecular packing in the crystal lattice of the two polymorphs of mNoM was extensively studied and a correlation between photoluminescence and secondary interactions was evaluated. In the solid state, all compounds showed emission in the yellow to red part of the electromagnetic spectrum (555–644 nm) with lifetimes of up to 25 μs and photoluminescence quantum yields of up to 47 %, depending on the substitution pattern. As all the evaluated compounds perform as good emitters with aggregation‐induced phosphorescence (AIP), these compounds can be regarded as multivalent platforms for future applications in supramolecular assemblies or as biomedical labels due to the versatile substitution patterns, manifold geometries as well as appealing photophysical properties.

Aggregation-induced phosphorescence emission-active heteroleptic Ir(III) complexes: Synthesis, photophysics, and latent fingerprint detection applications

Three heteroleptic Ir(III) complexes (Ir-TPA, Ir-CzPh and Ir-PhCz) with different electron-donating aryl groups on C^N ligands were synthesized. Their optical properties were systematically investigated by spectroscopic methods and theoretical calculations to elucidate the effects of introducing different electron-donating groups on their triplet excited state properties. All three complexes possess aggregation-induced phosphorescence emission (AIPE) behaviors. Critically, the relationship between the size of organic ligands and AIPE behaviors for these complexes has been characterized. Their significant AIPE properties predicted that they could be used as efficient latent fingerprint (LFP) developers. Rapid (within 10 s) incubation in Ir(III) complex solution produced high-resolution, naked-eye visible and mobile-photographable LFP images, which could provide fast, reproducible and identifiable analyses of level 3 details for LFPs accurately. In addition, complex Ir-PhCz shows the best imaging of the LFP due to its green light emission and high quantum yield (24.5 %) in solid state. This rapid and practical LFP visualization methodology based on AIPE developers could provide a reliable solution for LFPs detection and investigations in actual scenarios.

Alkyl-substituted bipyridyl platinum (II) complexes bearing alkynyl-naphthalimide ligands: Synthesis, photophysical properties, and tunable aggregation-induced emission activity

Different alkyl chains were introduced into alkynyl-naphthalimide ligands and bipyridine ligands to synthesize five platinum complexes, their structures were characterized and the photophysical properties were systematically investigated. It was found that the introduction of alkyl chains had no obvious effect on the absorption and emission of these complexes in dilute solution, while influence aggregation-induced emission activity in aggregated state. In the mixed solvent system of tetrahydrofuran and ethylene glycol, the shorter alkyl chains on the bipyridine ligands strengthen the aggregation-induced phosphorescence emission (AIPE) properties of complexes, however, the introduction of different alkyl chains on the alkynyl-naphthalimide ligands makes no difference on their AIPE properties. Combining the single crystal results and Hirshfled surface analysis, the photophysical properties of these complexes in aggregated state were affected by the stacking modes, which is due to the different interactions. This research may broaden the scope for the design of multi-functional materials adopting different aggregation states.

PtII(C^N)(N-donor ligand)Cl-type complexes showing highly sensitive aggregation-induced phosphorescence emission (AIPE) behavior fulfilled by long-size ligands and a distorted molecular configuration.

A series of four-coordinated PtII(C^N)(N-donor ligand)Cl-type complexes have been synthesized through a combination of long-size C^N-type and N-donor ligands. In addition, by varying the coordinating site in the N-donor ligand, a distorted molecular configuration has been constructed in these complexes. Their photophysical features, aggregation-induced phosphorescence emission (AIPE) behaviors, electrochemical properties and electroluminescence (EL) performance have been investigated in detail. It has been found that their AIE behaviors can be enhanced by both employing long-size ligands, especially the N-donor ligand, and adopting a distorted molecular configuration, furnishing a high AIE factor (αAIE) of ca. 13.8. Critically, benefitting from their long-size C^N-type and N-donor ligands, these PtII(C^N)(N-donor ligand)Cl-type complexes can exhibit very sensitive AIE behaviors in a mixture of THF-H2O, indicated by their noticeable emission increase with a low H2O volumetric fraction (fw) of ca. 0.1 in their THF solution. In solution-processed organic light-emitting diodes (OLEDs), they can achieve a luminance of 6743 cd m-2 at 13.5 V, a maximum external quantum efficiency (ηext) of 13.8%, a maximum current efficiency (ηL) of 42.4 cd A-1 and a maximum power efficiency (ηP) of 34.4 lm W-1, respectively. Hence, this research can provide key information for developing phosphorescent complexes with a highly sensitive AIE response and impressive EL ability.

Aggregation-induced circularly polarized phosphorescence of Pt(II) complexes with an axially chiral BINOL ligand.

A pair of chiral Pt(II) complexes coordinated by simple BINOL and bipyridine ligands displaying aggregation-induced phosphorescence and circularly polarized luminescence were characterized by X-ray crystallography and absorption and emission spectroscopies. The emission of the powder sample was reddish whereas the thin film dispersed in PMMA (fPf = 1 wt%) exhibited a white emission.

Research and Design of Aggregation-Induced Phosphorescent Materials for Time-Resolved Two-Photon Excited Luminescence Imaging.

Pure organic two-photon excited room temperature phosphorescent (RTP) materials have attracted great attention for time-resolved imaging due to their long emission lifetime and high resolution. The materials with an aromatic carbonyl group exhibit aggregation-induced emission (AIE) and RTP characteristics simultaneously. Here, we deeply explored the nature of aggregation-induced phosphorescence (AIP), especially the relationship between molecular configuration and optical properties. It was found that aggregation effect can suppress geometrical vibrations and regulate energy difference between S1 and T1. The aromatic carbonyl group plays significant roles in changing electronic configuration, resulting in large Stokes shift and spin-orbit coupling. It also leads to small transition dipole moment, decreasing two-photon absorption cross section and radiative decay rate. To improve two-photon absorption properties, we further designed a π-conjugated compound with large two-photon absorption cross section in the biological window (36.40 GM/656 nm) and AIP characteristics, which is a potential material in the application of time-resolved two-photon excited imaging.

Enhanced Aggregation-Induced Phosphorescence of Carbon Dots for Information Encryption Applications

Enhanced Aggregation-Induced Phosphorescence of Carbon Dots for Information Encryption Applications

Photoexcitation-Based Supramolecular Access to Full-Scale Phase-Diagram Structures through in situ Phase-Volume Ratio Phototuning.

Controlling phase separation and transition plays a core role in establishing and maintaining the function of diverse self-assembled systems. However, it remains challenging to achieve wide-range continuous phase transition for dynamically producing a variety of assembled structures. Here, we developed a far-from-equilibrium system, upon the integration of photoexcitation-induced aggregation molecules and block copolymers, to establish an in situ phase-volume ratio photocontrol strategy. Thus, full-scale phase-diagram structures, from lamellar structure to gyroidal, cylindrical, and finally to a spherical one, can be accessed under different irradiation periods. Moreover, the phase transition was accompanied by considerable aggregation-induced phosphorescence and hydrophilicity/hydrophobicity change for building a functional surface. This strategy allows for a conceptual advance of accessing a wide range of distinct self-assembled structures and functions in real time.

Esterase-Activated Precipitating Strategy to Achieve Highly Specific Detection and Long-Term Imaging of Calcium Ions by Aggregation-Induced Phosphorescence Probe.

Spatial and temporal monitoring of bioactive targets such as calcium ions is vitally significant for their essential roles in physiological and biochemical functions. Herein, we proposed an esterase-activated precipitating strategy to achieve highly specific identification and long-term bioimaging of calcium ions via lighting up the calcium ions by precipitation using a water-soluble aggregation-induced phosphorescence (AIP) probe. The designed probe CaP2 has an AIP behavior and can be efficiently aggregated by calcium ions through the coupling coordination of carboxylic acid and cyanide groups, which enables it to light up Ca2+ by precipitating-triggered phosphorescence. Four hydrophilic groups of tetraethylene glycol were introduced to endow the resulting probe CaP3 with extraordinary water solubility as well as excellent cellular penetration. Only when the probe CaP3 penetrates inside the live cells the existing esterase in cells can activate the probe to be transformed active CaP2 probe selectively binding with calcium ion in the surroundings. The probe was used to further evaluate the imaging of intracellular calcium ions in model organisms. The excellent imaging performance of CaP3 in Arabidopsis thaliana seedling roots demonstrates that CaP3 has the excellent capability of monitoring calcium ions in live-cell imaging, and furthermore CaP3 exhibits much better photostability and thereby greater potential in long-term imaging. This work established a general esterase-activated precipitating strategy to achieve specific detection and bioimaging in situ triggered by esterase in live cells, and established a water-soluble aggregation-induced phosphorescence probe with high selectivity to achieve specific sensing and long-term imaging of calcium ions in live cells.

Progress in Synthesis and Aggregation-Induced Phosphorescence of Persulfurated Arene Compounds

Progress in Synthesis and Aggregation-Induced Phosphorescence of Persulfurated Arene Compounds

AIPE-Active Ir(III) complexes with tuneable photophysical properties and application in mitochondria-targeted dual-mode photodynamic therapy

Aggregation-induced phosphorescence emission (AIPE) materials based on transition metal Ir(III) complexes have significant advantages in bioimaging and photodynamic therapy (PDT) due to the long lifetime, the reduced photobleaching and the good reactive oxygen species (ROS) generation. Herein, four cationic Ir(III) complexes (Ir1–Ir4) have been synthesized and studied. Tunable phosphorescence from green to red with the excellent properties of AIPE and long lifetimes can be achieved by varying the substituents. Moreover, these phosphorescence Ir(III) complexes exhibited dual-mode PDT potential (type I and type II). Complex Ir4 showed great prospect in bioimaging and PDT with the large Stokes shift (259 nm), the long lifetime (9.85 μs) and the high ROS yield (0.73). Confocal microscopy demonstrated that Ir4 accumulated in the mitochondria selectively and possessed remarkable photostability (reduced photobleaching up to 600 s). The results indicate that Ir4 may be used in dual-mode PDT guided by mitochondria-targeted imaging. This work provides an in-depth understanding of the relationship between structure and photophysical properties and facilitates the study in PDT applications.

Pt(II) diimine complexes bearing varied alkyl chains: Synthesis, tunable photophysical properties and aggregation-induced optical power limiting enhancement

A series of Pt(II) diimine complexes with varied alkyl chains on 2,2′- dipyridyl ligands (Pt-C1–Pt-C3) have been synthesized and characterized. The photophysical properties and nonlinear absorption properties were elucidated using UV–vis absorption, emission and transient absorption spectroscopy, density functional theory (DFT) calculations and electrochemical experiments. It was found that increasing the alkyl chain led to regular changes in the photophysical properties of Pt-C1–Pt-C3. The original conjugated skeleton of the Pt(II) complexes were affected when the alkyl chain was introduced and extended. All complexes exhibited an obvious aggregation-induced phosphorescence emission (AIPE) in a mixed solution comprised of tetrahydrofuran/water. The formation of nanoparticles in the aggregated state induced these complexes to exhibit different excited state properties. When the water content increased, the emission intensity increases 3 ∼ 13-flod and the excited state lifetime increased 98-flod due to the formation of Pt(II) complex nanoparticles. As a result, the optical power limiting (OPL) performance of these complexes was greatly improved. Based on the systematical investigation of nonlinear optical complexes in aggregated state, this work provided a theoretical basis for the development of new OPL materials. Furthermore, the Pt(II) complex nanoparticles will be more conducive to the potential application of OPL devices.

Iridium complexes having phosphrous ligands of large steric hindrance: Photophysical comparison between solution state, solid state and electrospun fibers

In this work, two luminescent iridium complexes were synthesized with 2-phenyl pyridine (ppy) and two phosphine-based ligands. There was large steric hindrance in these phosphine-based ligands, so that there would be enough time for the excited state based on highly luminescent 3MLLCT (metal-to-ligand-ligand-charge-transfer) electronic transformation It was found that there was limited aggregation-induced phosphorescence emission (AIPE) effect in these two iridium complexes since their ligands with large steric hindrance minimized the intermolecular (π-π) interactions between molecules. A distorted octahedral coordination field was found in the single crystals of these two iridium complexes. A systematical comparison on the photophysical parameters of these two iridium complexes in solution state, in solid state and in electrospun fiber was carried out, so that the limited aggregation-caused quenching (ACQ) could be confirmed. The potential surface crossing and energy transfer in the excited state of these two iridium complexes were analyzed by means of density functional theory calculation and temperature-dependent emission spectra. The limited ACQ effect in these two iridium complexes was finally confirmed due to the large ligand steric hindrance, which allowed phosphorescent decay of excited state. High emission quantum yield (0.27) and long emissive lifetime (0.43 µs) in solid state were observed.

Stepwise Increase of NdIII -Based Phosphorescence by AIE-Active Sensitizer: Broadening the AIPE Family from Transition Metals to Discrete Near-Infrared Lanthanide Complexes*.

We designed two near-infrared (NIR) lanthanide complexes [(L)2 -Nd(NO3 )3 ] (L=TPE2 -BPY for 1, TPE-BPY for 2) by employing aggregation-induced emission (AIE)-active tetraphenylethylene (TPE) derivatives as sensitizers, which possessed matched energy to NdIII , prevented competitive deactivation under aggregation, even shifted the excitation window toward 600 nm by twisted intramolecular charge transfer. Furthermore, benefiting from the 4 f electron shielding effect and antenna effect, the enhanced excitation energies of the AIE-active sensitizers by structural rigidification transferred into the inert NdIII excited state through 3 LMCT, affording the first aggregation-induced phosphorescence enhancement (AIPE)-active discrete NIR-emitting lanthanide complexes. As 1 equipped with more AIE-active TPE than 2, L→Nd energy transfer efficiency in the former was higher than that in the latter under the same conditions. Consequently, the crystal of 1 exhibited one of the longest lifetimes (9.69 μs) among NdIII -based complexes containing C-H bonds.

Two Luminescent Iridium Complexes with Phosphorous Ligands and Their Photophysical Comparison in Solution, Solid and Electrospun Fibers: Decreased Aggregation-Caused Emission Quenching by Steric Hindrance

In this paper, we prepared two phosphorescent Ir complexes with ligands of 2-phenyl pyridine (ppy), and two phosphorous ligands with large steric hindrance, hoping to allow enough time for the transformation of the highly phosphorescent 3MLLCT (metal-to-ligand-ligand-charge-transfer) excited state. Their large steric hindrance minimized the π-π interaction between complex molecules, so that the aggregation-induced phosphorescence emission (AIPE) influence could be minimized. Their single crystals indicated that they took a distorted octahedral coordination mode. Photophysical comparison between these Ir complexes in solution, in the solid state and in electrospun fibers was performed to confirm the realization of limited aggregation-caused quenching (ACQ). The potential surface crossing and energy transfer from 3MLBPECT/3MLBPELppyCT to 3MLppyCT in these Ir complexes were revealed by density functional theory calculation and temperature-dependent emission. It was confirmed that these two phosphorous ligands offered large steric hindrance, which decreased the ACQ effect, allowing the efficient emissive decay of the 3MLppyCT excited state. This is one of the several luminescent Ir complexes with a high emission yield (Φ = 0.27) and long emission lifetime (0.43 μs) in the solid state.

Rational design of pyrrole derivatives with aggregation-induced phosphorescence characteristics for time-resolved and two-photon luminescence imaging

Pure organic room-temperature phosphorescent (RTP) materials have been suggested to be promising bioimaging materials due to their good biocompatibility and long emission lifetime. Herein, we report a class of RTP materials. These materials are developed through the simple introduction of an aromatic carbonyl to a tetraphenylpyrrole molecule and also exhibit aggregation-induced emission (AIE) properties. These molecules show non-emission in solution and purely phosphorescent emission in the aggregated state, which are desirable properties for biological imaging. Highly crystalline nanoparticles can be easily fabricated with a long emission lifetime (20 μs), which eliminate background fluorescence interference from cells and tissues. The prepared nanoparticles demonstrate two-photon absorption characteristics and can be excited by near infrared (NIR) light, making them promising materials for deep-tissue optical imaging. This integrated aggregation-induced phosphorescence (AIP) strategy diversifies the existing pool of bioimaging agents to inspire the development of bioprobes in the future.

Aggregation-induced phosphorescence emission (AIPE) behaviors in PtII(C^N)(N-donor ligand)Cl-type complexes through restrained D2d deformation of the coordinating skeleton and their optoelectronic properties

A series of four-coordinated PtII(C^N)(N-donor ligand)Cl-type complexes have been synthesized to show aggregation-induced phosphorescence emission (AIPE) behaviors and impressive OLED device efficiencies.

Aggregation-induced phosphorescence of an anthraquinone based emitter

Room temperature phosphorescence (RTP) of metal-free organic molecules is a hot topic of current research interest. RTP can be enhanced through aggregation, crystallization, and the support of polymers and host-guest assemblies. The characteristics of highly phosphorescent aggregates formed from conventional chromophores make them ideal candidates for many potential applications. In this direction, we focused on the aggregation-induced phosphorescence of an anthraquinone derivative AqC6 in solution and in crystal state. The weakly emissive dilute solution exhibits a tunable emission with enhanced intensity and room temperature phosphorescence by increasing the concentration and solvent-antisolvent combination. The enhanced phosphorescence of crystals has been recreated in the solution by making use of aggregation. Interestingly, the support of PMMA enabled AqC6 to achieve enhanced processability, phosphorescence lifetime (174 ms) and quantum yield (5%).