Bacteriochlorophyll Aggregates Research Articles

Efficient two-step excitation energy transfer in artificial light-harvesting antenna based on bacteriochlorophyll aggregates

Chlorosomes of green photosynthetic bacteria are large light-harvesting complexes enabling these organisms to survive at extremely low-light conditions. Bacteriochlorophylls found in chlorosomes self-organize and are ideal candidates for use in biomimetic light-harvesting in artificial photosynthesis and other applications for solar energy utilization. Here we report on the construction and characterization of an artificial antenna consisting of bacteriochlorophyll c co-aggregated with β-carotene, which is used to extend the light-harvesting spectral range, and bacteriochlorophyll a, which acts as a final acceptor for excitation energy. Efficient energy transfer between all three components was observed by means of fluorescence spectroscopy. The efficiency varies with the β-carotene content, which increases the average distance between the donor and acceptor in both energy transfer steps. The efficiency ranges from 89 to 37% for the transfer from β-carotene to bacteriochlorophyll c, and from 93 to 69% for the bacteriochlorophyll c to bacteriochlorophyll a step. A significant part of this study was dedicated to a development of methods for determination of energy transfer efficiency. These methods may be applied also for study of chlorosomes and other pigment complexes.

Supramolecular chirality in self-assembly of zinc protobacteriochlorophyll-d analogs possessing enantiomeric esterifying groups

Zinc 3-hydroxymethyl-pyroprotopheophorbides-a esterified with a chiral secondary alcohol at the 17-propionate residue were prepared as bacteriochlorophyll-d analogs. The synthetic zinc 31-hydroxy-131-oxo-porphyrins self-aggregated in an aqueous Triton X-100 micellar solution to give red-shifted and broadened Soret and Qy absorption bands in comparison with their monomeric bands. The intense, exciton-coupled circular dichroism spectra of their self-aggregates were dependent on the chirality of the esterifying groups. The observation indicated that the self-aggregates based on the J-type stacking of the porphyrin cores were sensitive to the peripheral 17-propionate residues. The supramolecular structures of the present J-aggregates as models of bacteriochlorophyll aggregates in natural chlorosomes were remotely regulated by the esterifying groups.Graphical abstract

Mapping charge-transfer excitations in Bacteriochlorophyll dimers from first principles

Photoinduced charge-transfer excitations are key to understand the primary processes of natural photosynthesis and for designing photovoltaic and photocatalytic devices. In this paper, we use Bacteriochlorophyll dimers extracted from the light harvesting apparatus and reaction center of a photosynthetic purple bacterium as model systems to study such excitations using first-principles numerical simulation methods. We distinguish four different regimes of intermolecular coupling, ranging from very weakly coupled to strongly coupled, and identify the factors that determine the energy and character of charge-transfer excitations in each case. We also construct an artificial dimer to systematically study the effects of intermolecular distance and orientation on charge-transfer excitations, as well as the impact of molecular vibrations on these excitations. Our results provide design rules for tailoring charge-transfer excitations in Bacteriochloropylls and related photoactive molecules, and highlight the importance of including charge-transfer excitations in accurate models of the excited-state structure and dynamics of Bacteriochlorophyll aggregates.

Self-Assembly of a Zinc Bacteriochlorophyll-d Analog with a Lipophilic Tertiary Amide Group in the 17-Substituent

Abstract Self-assembled aggregates of bacteriochlorophyll(BChl)-c/d/e pigments play key roles in major light-harvesting antenna systems of photosynthetic green bacteria. Herein, we report the self-assembly of a lipophilic zinc BChl-d model with an N,N-didodecylamide in the 17-substituent. The present model formed two types of J-aggregates, which formed under kinetic and thermodynamic controls.

Intramolecular Vibrations in Excitation Energy Transfer: Insights from Real-Time Path Integral Calculations.

Excitation energy transfer (EET) is fundamental to many processes in chemical and biological systems and carries significant implications for the design of materials suitable for efficient solar energy harvest and transport. This review discusses the role of intramolecular vibrations on the dynamics of EET in nonbonded molecular aggregates of bacteriochlorophyll, a perylene bisimide, and a model system, based on insights obtained from fully quantum mechanical real-time path integral results for a Frenkel exciton Hamiltonian that includes all vibrational modes of each molecular unit at finite temperature. Generic trends, as well as features specific to the vibrational characteristics of the molecules, are identified. Weak exciton-vibration (EV) interaction leads to compact, near-Gaussian densities on each electronic state, whose peak follows primarily a classical trajectory on a torus, while noncompact densities and nonlinear peak evolution are observed with strong EV coupling. Interaction with many intramolecular modes and increasing aggregate size smear, shift, and damp these dynamical features.

Energy transfer dynamics and the mechanism of biohybrid photosynthetic antenna complexes chemically linked with artificial chromophores.

A light-harvesting strategy is crucial for the utilisation of solar energy. In this study, we addressed the expanding light-harvesting (LH) wavelength of photosynthetic LH complex 2 (LH2, from Rhodoblastus acidophilus strain 10050) through covalent conjugation with extrinsic chromophores. To further understand the conjugation architecture and mechanism of excitation energy transfer (EET), we examined the effects of the linker length and spectral overlap integral between the emission and absorption spectra of the energy donor and acceptor pigments. In the former case, contrary to the intuition based on the Förster resonance energy transfer (FRET) theory, the observed energy transfer rate was similar regardless of the linker length, and the energy transfer efficiency increased with longer linkers. In the latter case, despite the energy transfer rate increases at higher spectral overlaps, it was quantitatively inconsistent with the FRET theory. The mechanism of EET beyond the FRET theory was discussed in terms of the higher-lying exciton state of B850, which mediates efficient EET despite the small spectral overlap. This systematic investigation provides insights for the development of efficient artificial photosynthetic systems.

Probing size variations of molecular aggregates inside chlorosomes using single-object spectroscopy.

We theoretically investigate the possibility to use single-object spectroscopy to probe size variations of the bacteriochlorophyll aggregates inside chlorosomes. Chlorosomes are the light-harvesting organelles of green sulfur and non-sulfur bacteria. They are known to be the most efficient light-harvesting systems in nature. Key to this efficiency is the organization of bacteriochlorophyll molecules in large self-assembled aggregates that define the secondary structure inside the chlorosomes. Many studies have been reported to elucidate the morphology of these aggregates and the molecular packing inside them. It is widely believed that tubular aggregates play an important role. Because the size (radius and length) of these aggregates affects the optical and excitation energy transport properties, it is of interest to be able to probe these quantities inside chlorosomes. We show that a combination of single-chlorosome linear polarization resolved spectroscopy and single-chlorosome circular dichroism spectroscopy may be used to access the typical size of the tubular aggregates within a chlorosome and, thus, probe possible variations between individual chlorosomes that may result, for instance, from different stages in growth or different growth conditions.

Spectral Tuning Mechanism of Photosynthetic Light-Harvesting Complex II Revealed by Ab Initio Dimer Exciton Model.

Excited states of two kinds of bacteriochlorophyll (BChl) aggregates, B850 and B800, in photosynthetic light-harvesting complex II (LH2) are theoretically investigated by developing and using an extended exciton model considering efficiently evaluated excitonic coupling. Our exciton model based on dimer fragmentation is shown to reproduce the experimental absorption spectrum of LH2 with good accuracy, entailing their different redshifts originating from aggregations of B850 and B800. The systematic analysis has been performed on the spectra by quantitatively decomposing their spectral shift energies into the contributions of various effects: structural distortion, electrostatic, excitonic coupling, and charge-transfer (CT) effects. Our results show that the spectral redshift of B800 is mainly attributed to its electrostatic interaction with the protein environment, while that of B850 arises from the marked effect of the excitonic coupling between BChl units. The interchromophore CT excitation also plays a key role in the spectral redshift of B850. This CT effect can be effectively described using our dimer model. This suited characterization reveals that the pronounced CT effect originates from the characteristics of B850 that has closely spaced BChls as dimers. We highlight the importance of the refinement of the crystal structure with the use of quantum chemical methods for prediction of the spectrum.

Real-Time Path Integral Simulation of Exciton-Vibration Dynamics in Light-Harvesting Bacteriochlorophyll Aggregates.

The mechanism of excitation energy transfer in photoexcited bacteriochlorophyll (BChl) aggregates poses intriguing questions, which have important implications for the observed efficiency of photosynthesis. We investigate this process through fully quantum mechanical calculations of exciton-vibration dynamics in chains and rings of BChl a molecules, with parameters characterizing the B850 ring of the LH2 complex of photosynthetic bacteria. The calculations are performed using the modular path integral methodology, which allows the exact treatment of 50 intramolecular vibrations on each pigment using parameters obtained from spectroscopic Huang-Rhys factors with computational effort that scales linearly with aggregate length. Our results indicate that the interplay between electronic and vibrational time scales leads to the rapid suppression but not the overdamping of electronic coherence, which facilitates the spreading of excitation energy throughout the aggregate.

Triplet state quenching of bacteriochlorophyll c aggregates in a protein-free environment of a chlorosome interior

Efficient quenching of (bacterio)chlorophyll triplet states by carotenoids prevents formation of reactive singlet oxygen in photosynthetic light-harvesting complexes. This protective process requires a close interaction between both types of pigments, which is usually ensured by a protein scaffold. Here we have studied quenching of bacteriochlorophyll c triplets in chlorosomes from the green photosynthetic bacterium Chloroflexus aurantiacus by nanosecond spectroscopy. Bacteriochlorophyll c forms aggregates in the chlorosome interior without involvement of a protein. We have observed that the triplet transfer from bacteriochlorophyll aggregates to carotenoids occurs with a transfer time of approximately 4 ns, being more than ten times slower that the estimates for the fastest triplet quenching in pigment-protein light-harvesting complexes. Nevertheless, together with aggregation-mediated shortening of excited state lifetimes, carotenoids provide efficient protection against formation of singlet oxygen in chlorosomes. Efficient triplet quenching was also observed in self-assembling, artificial light-harvesting complexes containing bacteriochlorophyll c aggregates and β-carotene. This is important for their future applications in solar energy conversion. Finally, we have studied the temperature dependence of triplet quenching in chlorosomes and determined the activation energy of the energy transfer to be about 0.08 eV. This value lies within the range estimated for pigment-protein light-harvesting complexes.

Structure of Light-Harvesting Aggregates in Individual Chlorosomes.

Among all photosynthetic organisms, green bacteria have evolved one of the most efficient light-harvesting antenna, the chlorosome, that contains hundreds of thousands of bacteriochlorophyll molecules, allowing these bacteria to grow photosynthetically by absorbing only a few photons per bacteriochlorophyll molecule per day. In contrast to other photosynthetic light-harvesting antenna systems, for which a protein scaffold imposes the proper positioning of the chromophores with respect to each other, in chlorosomes, this is accomplished solely by self-assembly. This has aroused enormous interest in the structure-function relations of these assemblies, as they can serve as blueprints for artificial light harvesting systems. In spite of these efforts, conclusive structural information is not available yet, reflecting the sample heterogeneity inherent to the natural system. Here we combine mutagenesis, polarization-resolved single-particle fluorescence-excitation spectroscopy, cryo-electron microscopy, and theoretical modeling to study the chlorosomes of the green sulfur bacterium Chlorobaculum tepidum. We demonstrate that only the combination of these techniques yields unambiguous information on the structure of the bacteriochlorophyll aggregates within the chlorosomes. Moreover, we provide a quantitative estimate of the curvature variation of these aggregates that explains ongoing debates concerning the chlorosome structure.

Bacteriochlorophyll Aggregates Self-Assembled on Functionalized Gold Nanorod Cores as Mimics of Photosynthetic Chlorosomal Antennae: A Single Molecule Study

We prepare artificial aggregates that mimic the structure and function of natural chlorosomal light harvesting complexes of green photosynthetic bacteria. Gold nanorods functionalized with hydroxyl groups and immobilized on a substrate serve as cores for the growth of bacteriochlorophyll (BChl) aggregates from a buffer solution. The BChl pigments form large self-assembled aggregate particles with sizes more than twice that of natural chlorosomes. The size is controllable by the aggregation time. The aggregates are characterized on a single-particle level by atomic force microscopy, electron microscopy, and single-molecule spectroscopy. The absorption and fluorescence spectral properties which reflect the molecular level arrangement of the BChl aggregates closely resemble those of the natural chlorosomes of the photosynthetic bacterium Chlorobaculum tepidum. On the other hand, the results of linear dichroism and circular dichroism are different from those of the chlorosomes and indicate a different mesoscopic structure for the artificial aggregates. These results emphasize the structural role played by the baseplate pigment-protein complex in natural chlorosomes.

Energy transfer in aggregates of bacteriochlorophyll c self-assembled with azulene derivatives

Bacteriochlorophyll (BChl) c is the main light-harvesting pigment of certain photosynthetic bacteria. It is found in the form of self-assembled aggregates in the so-called chlorosomes. Here we report the results of co-aggregation experiments of BChl c with azulene and its tailored derivatives. We have performed spectroscopic and quantum chemical characterization of the azulenes, followed by self-assembly experiments. The results show that only azulenes with sufficient hydrophobicity are able to induce aggregation of BChl c. Interestingly, only azulene derivatives possessing a conjugated phenyl ring were capable of efficient (∼50%) excitation energy transfer to BChl molecules. These aggregates represent an artificial light-harvesting complex with enhanced absorption between 220 and 350 nm compared to aggregates of pure BChl c. The results provide insight into the principles of self-assembly of BChl aggregates and suggest an important role of the π-π interactions in efficient energy transfer.

Computational study of short-range interactions in bacteriochlorophyll aggregates

Chlorosomes are light harvesting complexes, interior of which is composed of bacteriochlorophylls that are assembled into lamellar aggregates. In this work, short-range structural parameters of aggregated bacteriochlorophyll-c were explored. The knowledge of bonds involved in aggregation together with other experimental results provides constraints which are satisfied by eight possible structural motifs. Each motif is based on a dimer unit with esterifying alcohols extending to opposite sides of the lamellar layer. The possible models include two of the previously proposed structural models, so-called antiparallel piggy-back dimer [1,2] and a parallel syn-anti model [3]. Structural models of aggregates were built as a single layer consisting of 8×10 monomers and were optimized by Amber program using modified General Amber Force Field. From the optimized models the central tetramer unit was selected for single-point energy analyses. Three electronic methods: RI-MP2/SVP, B97-D/TZVP, and PM6-DH2 were chosen for revealing energy relations in the structural models. Calculations disclose that the most preferable structure is the antiparallel chain model corresponding to the antiparallel piggy-back dimer, followed by one of antiparallel sheet models and one of parallel sheet arrangements. All simulations showed that due to the crystal packing a large deformation of monomeric building block occurred. The deformation energies (the difference between the energy of optimized isolated monomer and that of the monomer in assembled structures) are about 15kcal/mol for all considered computational methods. From energy decomposition, contributions of individual interactions to the overall stabilization energy were estimated. In addition, powder diffraction and optical spectra were calculated for all models and compared with experimental results.

Efficient Intrinsic Photoprotection in Strongly Coupled (Bacterio) Chloropyll Complexes

Chlorophyll (Chl) molecules in photosynthetic proteins are known to produce highly toxic singlet oxygen under illumination as a result of energy transfer from their triplet excited states to oxygen. To prevent the formation of singlet oxygen, carotenoids (Car) are typically positioned close to Chl to ensure rapid triplet-triplet energy transfer from Chl to Car, which can then safely dissipate the energy of the excited states. Our recent studies revealed a new, unconventional, but very efficient photoprotection mechanism in strongly coupled natural and artificial light-harvesting complexes that does not rely on the presence of carotenoids. Experimental studies on carotenoid-free chlorosomes and artificial bacteriochlorophyll (BChl) aggregates show that these structures are at least three orders of magnitude more stable to photodamage than monomeric forms of BChl. It was proposed that this photoprotection in strongly coupled arrays of pigments is due to triplet exciton formation, which lowers the energy of the triplet exciton substantially below that of singlet oxygen.In this report we present the results of our ongoing comprehensive study of the properties of triplet excited states of monomeric BChls, Chl aggregates and chlorosomes by means of EPR, time-resolved optical pump-probe spectroscopy and steady-state IR phosphorescence spectroscopy.

Self-assembly and energy transfer in artificial light-harvesting complexes of bacteriochlorophyll c with astaxanthin

Chlorosomes, the light-harvesting antennae of green photosynthetic bacteria, are based on large aggregates of bacteriochlorophyll molecules. Aggregates with similar properties to those in chlorosomes can also be prepared in vitro. Several agents were shown to induce aggregation of bacteriochlorophyll c in aqueous environments, including certain lipids, carotenes, and quinones. A key distinguishing feature of bacteriochlorophyll c aggregates, both in vitro and in chlorosomes, is a large (>60nm) red shift of their Q(y) absorption band compared with that of the monomers. In this study, we investigate the self-assembly of bacteriochlorophyll c with the xanthophyll astaxanthin, which leads to the formation of a new type of complexes. Our results indicate that, due to its specific structure, astaxanthin molecules competes with bacteriochlorophylls for the bonds involved in the aggregation, thus preventing the formation of any significant red shift compared with pure bacteriochlorophyll c in aqueous buffer. A strong interaction between both the types of pigments in the developed assemblies, is manifested by a rather efficient (~40%) excitation energy transfer from astaxanthin to bacteriochlorophyll c, as revealed by fluorescence excitation spectroscopy. Results of transient absorption spectroscopy show that the energy transfer is very fast (<500fs) and proceeds through the S(2) state of astaxanthin.

The lamellar spacing in self-assembling bacteriochlorophyll aggregates is proportional to the length of the esterifying alcohol

Chlorosomes from green photosynthetic bacteria are large photosynthetic antennae containing self-assembling aggregates of bacteriochlorophyll c, d, or e. The pigments within chlorosomes are organized in curved lamellar structures. Aggregates with similar optical properties can be prepared in vitro, both in polar as well as non-polar solvents. In order to gain insight into their structure we examined hexane-induced aggregates of purified bacteriochlorophyll c by X-ray scattering. The bacteriochlorophyll c aggregates exhibit scattering features that are virtually identical to those of native chlorosomes demonstrating that the self-assembly of these pigments is fully encoded in their chemical structure. Thus, the hexane-induced aggregates constitute an excellent model to study the effects of chemical structure on assembly. Using bacteriochlorophyllides transesterified with different alcohols we have established a linear relationship between the esterifying alcohol length and the lamellar spacing. The results provide a structural basis for lamellar spacing variability observed for native chlorosomes from different species. A plausible physiological role of this variability is discussed. The X-ray scattering also confirmed the assignments of peaks, which arise from the crystalline baseplate in the native chlorosomes.

β-Carotene to bacteriochlorophyll c energy transfer in self-assembled aggregates mimicking chlorosomes

Carotenoids are together with bacteriochlorophylls important constituents of chlorosomes, the light-harvesting antennae of green photosynthetic bacteria. Majority of bacteriochlorophyll molecules form self-assembling aggregates inside the chlorosomes. Aggregates of bacteriochlorophylls with optical properties similar to those of chlorosomes can also be prepared in non-polar organic solvents or in aqueous environments when a suitable non-polar molecule is added. In this work, the ability of β-carotene to induce aggregation of bacteriochlorophyll c in aqueous buffer was studied. Excitation relaxation and energy transfer in the carotenoid-bacteriochlorophyll assemblies were measured using femtosecond and nanosecond transient absorption spectroscopy. A fast, ∼100-fs energy transfer from the S 2 state of β-carotene to bacteriochlorophyll c was revealed, while no evidence for significant energy transfer from the S 1 state was found. Picosecond formation of the carotenoid triplet state (T 1) was observed, which was likely generated by singlet homo-fission from the S 1 state of β-carotene.

Structure of Chlorosomes from the Green Filamentous Bacterium Chloroflexus aurantiacus

The green filamentous bacterium Chloroflexus aurantiacus employs chlorosomes as photosynthetic antennae. Chlorosomes contain bacteriochlorophyll aggregates and are attached to the inner side of a plasma membrane via a protein baseplate. The structure of chlorosomes from C. aurantiacus was investigated by using a combination of cryo-electron microscopy and X-ray diffraction and compared with that of Chlorobi species. Cryo-electron tomography revealed thin chlorosomes for which a distinct crystalline baseplate lattice was visualized in high-resolution projections. The baseplate is present only on one side of the chlorosome, and the lattice dimensions suggest that a dimer of the CsmA protein is the building block. The bacteriochlorophyll aggregates inside the chlorosome are arranged in lamellae, but the spacing is much greater than that in Chlorobi species. A comparison of chlorosomes from different species suggested that the lamellar spacing is proportional to the chain length of the esterifying alcohols. C. aurantiacus chlorosomes accumulate larger quantities of carotenoids under high-light conditions, presumably to provide photoprotection. The wider lamellae allow accommodation of the additional carotenoids and lead to increased disorder within the lamellae.

Synthesis of 3 2-substituted bacteriochlorophyll- d analogs and their self-aggregation in a nonpolar organic solvent

Zinc complexes of 3 1-epimerically pure 3 2,3 2,3 2-trifluoro-bacteriopheophorbide- d methyl ester were prepared and their self-aggregation was examined in 1% (v/v) dichloromethane and hexane by visible and circular dichroism spectroscopies. Both the synthetic 3 1-trifluoromethylated diastereomers gave amorphous self-aggregates in the nonpolar organic solvent, while the corresponding nonfluorinated compounds possessing the 3 1-methyl group formed well-ordered and large oligomers similar to in vivo aggregates of bacteriochlorophyll- d in a chlorosome, a main light-harvesting antenna of green photosynthetic bacteria. The difference is ascribed to steric factor of the 3-CF 3 group, which was supported by optical properties of other synthetic zinc 3 1-hydroxy-13 1-oxo-chlorins possessing trifluoromethyl or secondary/tertiary substituents at the 3 1-position in the nonpolar organic solvent.