AgNP Films Research Articles

Synthesis and Characterization of Chitosan–Silver Nanocomposite Film: Antibacterial and Cytotoxicity Study

AbstractThis study is aimed at the in situ preparation and antibacterial study of silver nanoparticles within the matrix of an eco‐friendly, biocompatible, biodegradable, and bioavailable biopolymer (chitosan) to form Chi–AgNP film via multiple noncovalent interactions between the organic polymer and the nanoparticles. The film is fully characterized by infrared and ultraviolet spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. The characterization confirms the successful incorporation of silver nanoparticles into the polymeric network. Infrared spectroscopy reveals peaks corresponding to the vibration of functional groups present in chitosan with enhanced intensity and blueshifts caused by the presence of silver nanoparticles. Well‐monodispersed spherical silver nanoparticles with an average size of 10 nm are observed in the Chi–AgNP film. The surface plasmon resonance at 447 nm is consistent with a typical silver plasmon. Furthermore, the antibacterial effects on E. coli and S. aureus were determined and attributed to the release of AgNPs observed by UV absorption.

Potato oxidized hydroxypropyl starch/pectin-based indicator film with Clitoria ternatea anthocyanin and silver nanoparticles for monitoring chilled beef freshness

Potato oxidized hydroxypropyl starch (POHS)/pectin (P) functional and smart beef freshness indicator films were prepared using butterfly pea (Clitoria ternatea) anthocyanin (BA) and silver nanoparticles (AgNPs). BA exhibited significant pH-responsive color changes. BA and AgNPs were evenly distributed within a polymer matrix to create a compatible film with POHS/P. The films containing BA and AgNPs had good UV resistance and maintained strong mechanical strength, barrier properties, and color stability. The color of the indicator film changed from purple to green when exposed to ammonia, with the 1 % POHS/P/BA/AgNPs film showing the most sensitive response. The films also demonstrated strong antibacterial and antioxidant properties. The freshness of beef was monitored using 1 % POHS/P/BA/AgNPs films and was identified as sub-fresh and spoiled on days 4 and 7, respectively. The relationship between the color change of the indicator label and the freshness of chilled beef was established: purple for fresh meat, blue for less fresh meat, and green for spoiled meat. Thus, the new POHS/P/BA/AgNPs film can serve as a smart packaging material to indicate food freshness and extend shelf life. These results suggest that POHS/P/BA/AgNPs films have significant potential as an active and smart food packaging material.

Development of PVA/sodium alginate incorporated with histidine capped silver nanoparticles for food packaging application

AbstractPackaging is a growing field of interest, and the use of nanotechnology is accelerating its expansion. The study reports the fabrication of poly(vinyl alcohol) (PVA) blended sodium alginate (SA) and incorporated with different ratios of histidine‐capped silver (H‐AgNPs) nanoparticle films. Fabrication of PVA/SA/H‐AgNPs films was confirmed with the surface plasmon resonance (SPR) band denoted AgNPs presence between 400 and 420 nm measured by UV–Vis absorption spectroscopy. The characteristics of the polymeric biocomposite films were significantly altered by different ratios of AgNPs. The interaction of PVA/SA and PVA/SA with AgNPs was analyzed by using FT‐IR analysis. The degree of crystallinity was increased upon increasing the concentration of H‐AgNPs as confirmed by XRD measurements. The homogeneity of dispersion and surface morphology of samples were studied by FESEM. The addition of H‐AgNPs in the polymeric film increased the surface roughness of the polymeric film confirmed by AFM analysis. The contact angle of the PVA/SA blend matrix was observed to be 46.97°, and with the incorporation of AgNPs ranging from 3%, 5%, and 7% to the blend matrix, the contact angle of the nanocomposite films in increasing hydrophobic order was 60.53°, 83.57°, and 96.20°, respectively. The incorporation of AgNPs also demonstrates that the PVA/SA blend matrix has desirable thermal stability. The improved qualities were due to H bonding between PVA, SA, and H‐AgNPs, in which molecules contact strongly with one another. Furthermore, the PVA/SA/H‐AgNPs showed significant antibacterial activity against both Gram‐positive (G+) strains (Staphylococcus aureus) and Gram‐negative (G−) strains (Escherichia coli) bacterial infections. The findings of this research indicate that the PVA/SA/H‐AgNPs fabricated composite films considerable for applications in food packaging.

Nanocomposite Based on Bacterial Cellulose and Silver Nanoparticles Improve Wound Healing Without Exhibiting Toxic Effect

Wound healing is an important and complex process, containing a multifaceted process governed by sequential yet overlapping phases. Certain treatments can optimize local physiological conditions and improve wound healing. Silver nanoparticles (AgNP) are widely known for their antimicrobial activity. On the other hand, bacterial cellulose (BC) films have been used as a dressing that temporarily substitutes the skin, offering many advantages in optimizing wound healing, in addition to being highly biocompatible. Considering the promising activities of AgNP and BC films, the present study aimed to evaluate the wound healing activity in Wistar Hannover rats using a nanocomposite based on bacterial cellulose containing AgNP (AgBC). In a period of 21 days, its influence on the wound area, microbial growth, histopathological parameters, and collagen content were analyzed. In addition, toxicity indicators were assessed, such as weight gain, water consumption, and creatinine and alanine transaminase levels. After 14 days of injury, the animals treated with AgBC showed a significant increase in wound contraction. The treatment with AgBC significantly reduced the number of microbial colonies compared to other treatments in the first 48 h after the injury. At the end of the 21 experimental days, an average wound contraction rate greater than 97 % in relation to the initial area was observed, in addition to a significant increase in the amount of collagen fibers at the edge of the wounds, lower scores of necrosis, angiogenesis and inflammation, associated with no systemic toxicity. Therefore, it is concluded that the combination of preexisting products to form a new nanocomposite based on BC and AgNP amplified the biological activity of these products, increasing the effectiveness of wound healing and minimizing possible toxic effects of silver.

Development of a MoS2/Ag NP Nanopocket to Trap Target Molecules for Surface-Enhanced Raman Scattering Detection with Long-Term Stability and High Sensitivity.

Surface-enhanced Raman scattering (SERS) substrates mostly achieve highly sensitive detection by designing various hot spots; however, how to guide molecules to hot spots and prevent them from leaving has not been thoroughly considered and studied. Here, a composite MoS2/Ag NP nanopocket detector composed of MoS2 covered with a Ag NP film was fabricated to develop a general SERS method for actively capturing target molecules into hotspots. A finite element method (FEM) simulation of the multiphysics model was used to analyze the distributions of electric field enhancements and hydrodynamic processes in solution and air of the MoS2/Ag NP nanopocket. The results revealed that covering MoS2 slowed the evaporation of the solution, extended the window period for SERS detection, and enhanced the electric field in comparison with the monolayer Ag NP film. Therefore, in the process of dynamic detection, the MoS2/Ag NP nanopocket can provide an efficient and stable signal within 8 min, increasing the high sensitivity and long-term stability of the SERS method. Furthermore, a MoS2/Ag NP nanopocket detector was applied to detect antitumor drugs and monitor hypoxanthine structural changes in serum, which demonstrated long-term stability and high sensitivity for SERS analysis. This MoS2/Ag NP nanopocket detector paves the way for developing the SERS method in various fields.

Effect of silver nanoparticles on structural, thermal, electrical, and mechanical properties of poly(vinyl alcohol) polymer nanocomposites

AbstractThis paper presents the in‐situ chemical synthesis of silver nanoparticles (AgNPs) with glycerol embedded in poly(vinyl alcohol) (PVA) to synthesize (PVA/AgNPs) polymer nanocomposites with different volume percentages of AgNPs (2, 4, and 6) %v/v. X‐ray diffractometer shows the (200) plane of AgNPs, which appeared at 44.82° in PVA/(2, 4, and 6) %v/v AgNPs films. However, the (111), (220), and (311) planes at 2θ (37.55°, 65.08°, and 77.45°) respectively appeared in PVA with 6%v/v AgNPs only. Fourier transform infrared spectroscopy spectrum of AgNPs shows a COC peak at 1273 cm−1 which is attributed to the stronger affinity of AgNPs on the COC bonds in the PVA matrix. The scanning electron microscope confirmed that all nanoparticles are open‐spherical or near‐spherical in shape. Differential scanning calorimetry shows the decrease in glass transition and melting temperature of pure PVA from 64.62° and 185.54° to 53.09° and 182.35° after the incorporation of AgNPs. Thermogravimetric analysis shows the reduction of thermal stability of PVA/AgNPs films when compared to pure PVA. The electrical conductivity of PVA/AgNPs films increased with the addition of AgNPs. From Mechanical studies, the values of Young's modulus, yield strength, and ultimate tensile strength decreased with increasing AgNPs volume percentage.

Facile Synthesis of Ag NP Films via Evaporation-Induced Self-Assembly and the BA-Sensing Properties.

Herein, we design and prepare large-area silver nanoparticle (Ag NP) films based on evaporation-induced self-assembly, which offers the visual and real-time detection of chilled broiler meat freshness. The color change is based on the fact that an increase in the biogenic amine (BA) concentration causes a change in the absorption wavelength of Ag NPs caused by aggregation and etch of the Ag NPs, resulting in a yellow to brown color change, thus enabling a naked-eye readout of the BA exposure. The Ag NP films exhibit a rapid, sensitive, and linear response to BAs in a wide detection range of 2 µM to 100 µM. The Ag NP films are successfully applied as a quick-response, online, high-contrasting colorimetric sensor for visual detection of the freshness of chilled broiler meat.

Green synthesis of (CS/OLE) AgNPs and evaluation of their physico-chemical characteristic

The present article involves the bio-synthesis of (Chitosan/olive leaf extract) silver nanoparticles (CS/OLE) AgNPs using a simple green electrochemical procedure followed by UV-irradiation time. The properties and structure of the resulting (CS/OLE) AgNPs were characterized by employing several analytical techniques including, Infrared spectrum (FT-IR), UV–VIS spectroscopy, X-ray analysis (XRD), energy-dispersive X-ray (EDX) and degredation. Besides, the studying of the thermal characteristics of the (CS/OLE) AgNPs electrets were also investigated. Formation of Ag nanoparticles was observed upon varying the solution color from faint yellow into yellowish brown and was achieved by the appearance of absorption peak at about ~ 410 nm of the resulting AgNPs corresponding to the surface plasmon resonance (SPR). The sharp peaks appear at 32.16°, 46.19°, 54.75°, 57.59°, and 76.7°, indicating the presence of AgNPs as shown from XRD. With comparing the anti-bacterial efficiency of (CS/OLE) AgNPs and (CS/OLE) we found that the AgNPs display a relatively high anti-bacterial activity than in plant extract and chitosan alone. The electrical properties of (CS/OLE) AgNPs films were studied by global thermally stimulated depolarization current (TSDC) spectra for explaining the relaxation phenomena of the samples. In addition, the molecular parameters (The activation energy Ea and pre-exponential time τo), have been evaluated by the Arrhenius equation. The Ea was found in ~ (0.39–0.62 eV) for (CS/OLE).

Silver Nanoparticle Films Obtained by Convective Self-Assembly for Surface-Enhanced Raman Spectroscopy Analyses of the Pesticides Thiabendazole and Endosulfan.

Pesticides pose a great threat to human health and their rapid detection has become an urgent public safety issue engaging the scientific community to search for fast and reliable detection techniques. In this context, Surface Enhanced Raman Spectroscopy (SERS) has emerged as a valuable detection and analysis tool due to its high sensitivity and selectivity, proving its suitability for the food industry and environmental monitoring applications. Here, we report on the fabrication of colloidal silver nanoparticle (AgNP) films by convective self-assembly (CSA) on solid planar substrate and their use for the SERS analyses of two types of pesticides, the fungicide thiabendazole (TBZ) and the insecticide α-endosulfan (α-ES). Electron microscopy shows that these nanoparticle films are dense, highly compact, and uniform across several mm2 areas. The SERS efficiency of the fabricated AgNP films is evaluated using a well-known Raman probe, p-aminothiophenol, for multiple excitation laser lines (532 nm, 633 nm, and 785 nm). The films exhibit the largest SERS enhancement factors for 785 nm excitation, reaching values larger than 105. Thiabendazole could be readily adsorbed on the AgNPs without any sample surface functionalization and detected down to 10−6 M, reaching the sub-ppm range. Endosulfan, a challenging analyte with poor affinity to metal surfaces, was captured near the metal surface by using self-assembled alkane thiol monolayers (hexanethiol and octanethiol), as demonstrated by the thorough vibrational band analysis, and supported by density functional theory (DFT) calculations. In addition, principal component analysis (PCA) based on SERS spectra offers significant leverage in discrimination of the molecules anchored onto the metallic nanostructured surface. This present study demonstrates the utility of self-assembled colloidal nanoparticle films as SERS substrates for a broad range of analytes (para-aminothiophenol, thiabendazole, α-endosulfan, and alkanethiols) and contributes to the development of SERS-based sensors for pesticides detection, identification and monitoring.

Improved stability and film formability of oil-based silver nanoparticle suspensions by addition of polystyrene

In this study, we focused on how to develop an oil-based stable suspension of conductive silver ink and improve its film formability on the substrate. Silver nanoparticles (Ag-NPs) were first prepared in water with addition of oleic acid (OA) and butyl amine (BA) as co-stabilizing agents. The water medium was then replaced by an organic solvent to prepare the organic silver conductive ink. The synthesized Ag-NPs with an average particle size of about 13.3 nm were stabilized by steric hindrance of the attached OA− as proved by FTIR analysis and surface zeta potential. The Ag-NPs had higher stability in cyclohexane than in hexane, owing to the increased interaction between the long alkyl chain in OA− and cyclohexane. The stability was more than one year in cyclohexane with little change in particle size. Conductive films were obtained by drop-coating the organic Ag-NP inks on glass slide and sintering up to 250 °C. Moreover, addition of polystyrene at 1 wt % into the cyclohexane increased the wettability of conductive ink on the substrate and improved the film formability and integrity while preventing oxidation during sintering. A uniform and hydrophobic Ag-NP film was obtained with a sheet resistance of 0.64 Ω/Sq.

Multifunctional antibacterial films with silver nanoparticles reduced in situ by lemon juice

Microorganisms contribute to deterioration of garden stuff after picking. Antibacterial films consisting of polyvinyl alcohol (PVA), soluble starch (SS), and silver nanoparticles (AgNPs) with AgNPs in situ reduced from AgNO3 by lemon juice (LJ) were developed to combat microbial corruption. PVA/SS/LJ/AgNPs films have better tensile strength and elongation at break, but lower water vapor permeability, moisture absorption, and transmittance compared to PVA/SS and PVA/SS/LJ films. Silver released from PVA/SS/LJ/AgNPs films were 13.55, 18.97, 19.55, 20.19, 20.47, and 20.82 mg/g after submerging samples in water for three seconds and soaking for 1, 2, 3, 4, and 5 days, respectively. PVA/SS/LJ/AgNPs films had good bacteriostatic effects on Escherichia coli, Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, and Salmonella, as the average diameter of the inhibition circle was 12.12 ± 0.01, 13.04 ± 0.02, 14.79 ± 0.01, 14.20 ± 0.01, and 12.68 ± 0.01 mm, respectively. Therefore, PVA/SS/LJ/AgNPs film has a wide application prospect.

Annealed plasmonic Ag nanoparticle films for surface enhanced fluorescence substrate

In this work, the silver nanoparticle (Ag NP) films were deposited on glass slide by dc magnetron sputtering. The effect of annealing temperature on morphology and optical property were characterized by field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and UV–Vis-NIR spectroscopy, respectively. From the results, the size and inter-particle distance of Ag NPs depend on annealing temperature. The localized surface plasmon resonance (LSPR) band position shift to the blue with the annealing temperature increased. The surface enhanced fluorescence (SEF) effect of the Ag NPs films was investigated by emission spectra of Rhodamine 6G (Rh6G) fluorescent molecules. It was found that the florescent intensity of R6G, corresponding to the diameter and surface roughness of Au NP films. Finally, the Ag NPs film substrate offer a cost-effective with non-lithography fabrication potentially applied in plasmonic sensor chips for biomedical and food safety applications.

Antimicrobial silver coating using PVD-PECVD system

Physical Vapor Deposition - Plasma Enhanced Chemical Vapor Deposition (PVD-PECVD) systems are used exclusively for deposition and doping of carbonaceous films. However, this technique presents promising characteristics for the deposition of silver nanoparticles (Ag-NPs) on textiles, which meet the industrial demand for a more versatile and efficient methodology than the Magnetron Sputtering (MS) technique. In this regard, cotton textiles were coated with Ag-NP films produced by PVD-PECVD, and compared in terms of technical Physical vapor deposition - plasma enhanced chemical vapor deposition (PVD-PECVD) system has been used exclusively for deposition and doping of carbonaceous films [silver nanoparticles (Ag-NPs)] on cotton fabrics and the findings are compared, in terms of technical efficiency and microbial inhibition, with those of the magnetron sputtering (MS) technique. It is found that the proposed technique presents promising characteristics for the deposition of silver nanoparticles (Ag-NPs) on textiles, which meet the industrial demand.efficiency and microbial inhibition, with findings in the literature for the MS technique.

Furcellaran nanocomposite films: The effect of nanofillers on the structural, thermal, mechanical and antimicrobial properties of biopolymer films

Graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs) were added to furcellaran films (FUR). Silver nanoparticles (AgNPs) were prepared by reducing AgNO3 using a FUR matrix as the stabilising agent. The structure and surface morphology of nanocomposite films were obtained using FTIR, SEM and XRD. The molecular weights of furcellaran chains were estimated using HPSEC-MALLS-RI. Characterisation of the films was undertaken to analyse their physical, mechanical and structural properties. SEM analysis revealed that GO, MWCNTs and AgNPs were evenly distributed throughout the FUR surface. FUR + AgNP films showed antimicrobial activity against bacteria and fungi. P. aeruginosa, E. faecalis and S. aureus were the most affected with effective growth inhibition using the disc diffusion method. In the study, the effect of nanofillers on the structural, thermal, mechanical and antimicrobial properties of furcellaran films as potential materials for food packaging is presented.

Synthesis, Physical, Mechanical and Antibacterial Properties of Nanocomposites Based on Poly(vinyl alcohol)/Graphene Oxide-Silver Nanoparticles.

The design of new materials with antimicrobial properties has emerged in response to the need for preventing and controlling the growth of pathogenic microorganisms without the use of antibiotics. In this study, partially reduced graphene oxide decorated with silver nanoparticles (GO–AgNPs) was incorporated as a reinforcing filler with antibacterial properties to poly(vinyl alcohol) (PVA) for preparation of poly(vinyl alcohol)/graphene oxide-silver nanoparticles nanocomposites (PVA/GO–AgNPs). AgNPs, spherical in shape and with an average size of 3.1 nm, were uniformly anchored on the partially reduced GO surface. PVA/GO–AgNPs nanocomposites showed exfoliated structures with improved thermal stability, tensile properties and water resistance compared to neat PVA. The glass transition and crystallization temperatures of the polymer matrix increased with the incorporation of the hybrid. The nanocomposites displayed antibacterial activity against Staphylococcus aureus and Escherichia coli in a filler content- and time-dependent manner. S. aureus showed higher susceptibility to PVA/GO–AgNPs films than E. coli. Inhibitory activity was higher when bacterial cells were in contact with nanocomposite films than when in contact with leachates coming out of the films. GO–AgNPs based PVA nanocomposites could find application as wound dressings for wound healing and infection prevention.

Cost-effective PEDOT:PSS Temperature Sensors Inkjetted on a Bendable Substrate by a Consumer Printer.

In this work, we report on a fabrication protocol to produce fully inkjet-printed temperature sensors on a bendable polyethylene terephthalate (PET) substrate. The sensing layer is made of polymer-based Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) ink that is electrically contacted by an underlying interdigitated electrode (IDE) structure based on a silver nanoparticle (AgNP) ink. Both inks are available commercially, and no further ink processing is needed to print them using a cost-effective consumer printer with standard cartridges. The fabricated sensor modules are tested for different IDE dimensions and post-deposition treatments of the AgNP film for their response to a temperature range of 20 to 70 °C and moisture range of 20 to 90% RH (relative humidity). Attributed to the higher initial resistance, sensor modules with a larger electrode spacing of 200 µm show a higher thermal sensitivity that is increased by a factor of 1.8 to 2.2 when compared to sensor modules with a 150 µm-spacing. In all cases, the sensors exhibit high linearity towards temperature and a response comparable to state of the art.

Cold Atmospheric Plasma Annealing of Plasmonic Silver Nanoparticles

This work describes a new approach to anneal metallic nanoparticles at room temperature using atmospheric pressure plasma. Silver nanoparticle (AgNP) films were deposited on quartz substrates using aerosol injection technique. The AgNP films were annealed at 100°C - 400°C using rapid thermal processing, and at room temperature by cold atmospheric pressure plasma for 2 - 15 minutes. Surface plasmon resonance (SPR) of un-annealed AgNP films was observed at 426 nm, which was blue shifted by 5 to 70 nm after cold plasma annealing. The blue shift in SPR was also observed for thermally annealed AgNP films and the shift was similar to that of cold plasma annealing. SEM images showed the similar distribution of AgNPs on quartz substrates for both cold plasma annealed and thermally annealed AgNP films.

Production of silver nanoparticles by green synthesis using artichoke (Cynara scolymus L.) aqueous extract and measurement of their electrical conductivity

This work reports the production of silver nanoparticles (AgNPs) by a green method using, for the first time, an extract of artichoke (Cynara scolymus L.), and we explore their electrical properties with the aim of using, for the first time, totally green AgNPs on the preparation of highly conductive inks. The ultraviolet-visible spectroscopy (UV–Vis) studies monitored the surface plasmon resonance phenomenon of green-synthesized silver nanoparticles. Biomolecules of Cynara scolymus L. (CS) extract flower were suggested to be responsible for reducing and capping of AgNPs, by Fourier transformed infrared spectroscopy (FTIR) measurements. Elemental analysis was determined by energy dispersive spectroscopy (EDS). Transmission electron microscopy analysis showed nearly spherical silver nanoparticles surrounded and connected by CS extract material with size varying from 30–80 nm. Scanning electron microscope studies revealed films of AgNPs surrounded by CS extract with nearly spherical and uniformly dispersed silver nanoparticles. The peaks in x-ray diffraction pattern are in good match with that of face-centred-cubic form of metallic silver. The purity and thermal stability of the formed AgNP was detected by differential scanning calorimetry-thermal gravimetric analysis, the melting point at through this analysis was closely related to bulk metallic silver which indicates its purity. Moreover, the electrical resistivity test, the four probe method, confirmed that the green synthesized AgNP using artichoke flower extract had highly electrical conductivity: the resistivity of AgNP films was of c.a. after sintering treatment at for 30 min, which was about three times that of bulk silver . Hence, green synthesis can be a prospective way to develop metallic nanoparticles for the preparation of highly conductive inks with low sintering temperature.

The Interaction of CdSe/ZnS Quantum Dot with Plasmonic Ag Nanoparticles Deposited on Amorphous Hydrogenated Carbon Thin Films

Local fields of metal nanoparticles can change quantum dots (QDs) absorption and luminescence. In this work, we have investigated the interaction of granulated Ag NPs films with CdSe/ZnS semiconductor QDs in hybrid structure with a-C:H thin films. We have studied hybrid structure with two a-C:H films on a quartz substrate having wider optical gap of 2.1 eV and narrow gap of 0.7 eV. The distribution of Ag NPs on the a-C:H was more ordered unlike a pure quartz surface. Homogeneous films of Ag NPs on a-C:H surface have narrower picks of LSPR in spectra. The intensity magnifying and the blue shift of the LSPR peak of Ag NPs on 31 nm in the spectra has been observed with an increase in the optical gap of a-C:H film. We have also compared how the properties of a-C:H films in hybrid structures with Ag NPs affect the absorption and luminescence of CdSe/ZnS quantum dots. The absorption maximum for the QDs on Ag NPs/a-C:H surface was higher than on Ag NPs on pure quartz. The red shift of the absorption peak was observed. We have observed photoluminescence quenching of the CdSe/ZnS QDs on the surfaces of the studied hybrid structures. The greatest quenching of QD luminescence was observed on quartz substrate. A less significant quenching of the CdSe/ZnS QDs luminescence was obtained in the sample with a-C:H film having a wider optical gap.

On the sintering of solution-based silver nanoparticle thin-films for sprayed and flexible antennas

In this work, we report on the fabrication and characterization of sub-300 nm electrode films based on solution-processed silver nanoparticles (AgNPs). Following the deposition of the electrode material using a scalable and homogenous spray process, the films are treated with thermal or photonic sintering to promote the coalescence of the nanoparticles and in turn decrease the resistivity of the films. After sintering, a resistivity of 63 ± 13 nΩ m is achieved for the AgNP films, which is only by a factor of four larger than the literature value for bulk silver. Both post-deposition treatments show a similar performance with regard to the achieved resistivity. However, photonic sintering avoids the need for thermal annealing at substrate temperatures of 150 °C and above. In addition, the photonic sintering process can easily be embedded in a roll-to-roll process and is extremely fast with light exposure times below 3 ms. Thus, this manufacturing technique paves the way for the use of flexible substrates in electronics. As a simple and practical application, we present the use of AgNP films for antennas operating in the 5 GHz band on flexible polyethylene terephthalate substrate. An original coplanar design is employed for the fabrication of antennas with a single conductive layer that exhibit a maximum return loss and radiation of −27 dB and 95%, respectively.