African Plate Research Articles

Unusual Sunrise and Sunset Terminator Variations in the Behavior of Sub-Ionospheric VLF Phase and Amplitude Signals Prior to the Mw7.8 Turkey Syria Earthquake of 6 February 2023

We report on the recent earthquakes (EQs) that occurred, with the main shock on 6 February 2023, principally in the central southern part of Turkey and northwestern Syria. This region is predisposed to earthquakes because of the tectonic plate movements between Anatolian, Arabian, and African plates. The seismic epicenter was localized at 37.08°E and 37.17°N with depth in the order of 10 km and magnitude Mw7.8. We use Graz’s very-low-frequency VLF facility (15.43°E, 47.06°N) to investigate the amplitude variation in the Denizköy VLF transmitter, localized in the Didim district of Aydin Province in the western part of the Anatolian region in Turkey. Denizköy VLF transmitter is known as Bafa transmitter (27.31°E, 37.40°N), radiating at a frequency of 26.7 kHz under the callsign TBB. This signal is detected daily by the Graz facility with an appropriate signal-to-noise ratio, predominantly during night observations. We study in this analysis the variations of TBB amplitude and phase signals as detected by the Graz facility two weeks before the earthquake occurrence. It is essential to note that the TBB VLF transmitter station and the Graz facility are included in the preparation seismic area, as derived from the Dobrovolsky relationship. We have applied the multi-terminators method (MTM), revealing anomalies occurring at sunset and sunrise terminator occasions and derived from the amplitude and the phase. Minima and maxima of the TBB signal are linked to three terminators, i.e., Graz facility, TBB transmitter, and EQ epicenter, by considering the MTM method. We show that the significant anomalies are those linked to the EQ epicenter. This leads us to make evident the precursor seismic anomaly, which appears more than one week (i.e., 27 January 2023) before EQ occurrence. They can be considered the trace, the sign, and the residue of the sub-ionospheric propagation of the TBB transmitter signal disturbed along its ray path above the preparation EQ zone. We find that the sunrise–sunset anomalies are associated with tectonic regions. One is associated with the Arabian–African tectonic plates with latitudinal stresses in the south–north direction, and the second with the African–Anatolian tectonic plates with longitudinal stresses in the east–west direction. The terminator time shift anomalies prior to EQ are probably due to the lowering (i.e., minima) and raising (i.e., maxima) of the ionospheric electron density generated by atmospheric gravity waves.

Enhancing Detection of Small Earthquake Events from the 2017 Mw 6.5 Botswana Earthquake Using Cross-Correlation Back-Projection Analysis

On 3 April 2017, an Mw 6.5 earthquake occurred in central Botswana, situated inside the southern African plate. However, in a region with sparse station coverage like Botswana, the earthquake catalog is usually largely incomplete at smaller magnitudes. Here we propose a modified back-projection method using a correlation characteristic function, which represents energy similarity and mitigates interference due to waveform complexity in regional seismic networks, aiming to enhance the detection of small seismic events. The energy-related characteristic function exhibits robust detections for low signal-to-noise ratio data, a capability not achievable by traditional arrival time picking methods. Detection reliability is ensured through a dual search constraint, optimizing effective signal count, considering nearby epicentral station signals, and accounting for seismic events clustering, which involves discarding seismic events from regions with infrequent earthquake occurrences. A total of 365 events (magnitude completeness of ∼ M 2), about four times more than the catalog obtained by other methods, have been detected within seven days after the Botswana mainshock. Most are low signal-to-noise ratio events for that are not localized by traditional methods. The resulting earthquake sequence occurred in at least three NW-SE fault strands between the Kaapvaal Craton and the Limpopo Belt. Our results, when combined with other geophysical data, suggest that the Botswana earthquake mainly results from the difference of intraplate basal dragging forces at various tectonic regions driven by the clockwise plate motions, which would generate extensional strains along the weak edges of rigid blocks.

Cenozoic Reactivation of the Penacova-Régua-Verin and Manteigas-Vilariça-Bragança Fault Systems (Iberian Peninsula): Implication in Their Seismogenic Potential

The Penacova-Régua-Verin (PRV) and the Manteigas-Vilariça-Bragança (MVB) are two of the longest faults of the Iberian Peninsula. These faults striking NNE–SSW, over lengths of >200 km, were developed during late-Variscan Orogeny and reactivated in response to the Alpine Cycle tectonics. Their tectonic evolution during Alpine compression (Cenozoic) and their implication in the active tectonic activity of Iberia are under discussion. Their recent tectonic activity is recorded in the vertical offset of geomorphological surfaces, in the associated pull-apart basins, and in M > 7 paleoseismic events. Based on the vertical surface offset of Pliocene surfaces (140–300 m for the MVB fault and 150–200 m for the PRV), together with the horizontal offset (1300–1600 m for MVBF fault and 600–1400 m for PRVF), we can conclude that they were reactivated as left-lateral strike-slip faults with a reverse component during the Pliocene (3.6 Ma)–present. These results indicate that these faults are not related to the strain transmission during the collision with Eurasia (Eocene–Oligocene). However, they are related to the intraplate strain of the southern collision with the African plate during the Upper Neogene. The estimated slip-rate is 0.2–0.5 mm/a for both faults. These slip-rates evidence important implications for the seismic hazard of this intraplate region.

Pre-shortening reconstruction of the adria microplate: Balanced and restored cross-sections through the Southern Apennines–Dinarides (Central Mediterranean Sea)

The Adria plate and/or microplate has accommodated the differential eastward motion of Africa, Europe-Iberia, since the Jurassic times, and the subsequent convergence between Africa and Eurasia from Middle Cretaceous onwards. Its complex tectonic deformation, responsible of the development of the opposing Apennines and Dinarides thin- and thick-skinned fold and thrust belts, remains poorly constrained, fueling an ongoing debate on the original position of Adria, its pre-compressional continental width, and crustal structure. Here we tackle these uncertainties by analyzing and integrating published structural cross-sections, subsurface data and 2D lithospheric numerical models to build a 758 km long regional balanced and restored cross-sections along a SW-NE transect through the Southern Apennines and Southern Dinarides. Employing the line length method for the sedimentary cover and assuming the preservation of the pre-Triassic continental crustal area, we reconstruct the pre-compressional continental width of Adria. The unfolding of the sedimentary cover along the SW-NE cross-section results in an undeformed continental Adria microplate width of approximately 1050 km, slightly under previous estimations (1175 to 1670 km). The minimum total shortening results in 291 km: 148 km across the Southern Apennines and 143 km across the Southern Dinarides. We then calculate the Adria microplate continental crustal thickness during Middle-Late Jurassic time assuming local isostatic balance, obtaining 23 km for the eastern and central Adria sectors, based on shallow water carbonate sequences. In contrast, the western Adria sector at the Southern Apennines results in a restored pre-Triassic continental crustal thickness of only 7 km, suggesting that the middle and lower crustal layers in this sector may have been partially removed, possibly by mantle delamination during Neogene to Quaternary collisional processes. The results strongly support that the Adria microplate was located to the east of the Pelagian Basin and formed part of the African Plate around the Permian–Triassic boundary interval.

Paleostress evolution of the Outer Kwanza basin (offshore Angola); comparison with the Congo basin and implications for the tectonic history of the Central segment of the West Africa passive margin

This study aims at reconstructing the paleostress history of the Outer (offshore) Kwanza basin (West African passive margin) and at comparing it to stress results acquired further north in the Congo basin. Three oriented borehole cores provided by TotalEnergies and reaching the syn-rift, Barremian-Aptian pre-salt carbonates offshore Angola were investigated. Paleopiezometry based on the Stylolite Roughness Inversion Technique (SRIT) and Calcite Twin Inversion Technique (CSIT) was combined with fracture analysis, U–Pb geochronology of carbonates and burial modelling to unravel the orientations and magnitudes of horizontal and vertical stresses affecting the pre-salt carbonates over time. Calcite twins were measured from a primary sparite matrix, and the inversion process unravelled a polyphase stress history, comprising ∼ E-W and NE-SW extensional trends that we associate to the rifting (130-112 Ma) that led to the opening of the South Atlantic ocean. The ∼ E-W extension is consistent with the early occurrence of N-S striking normal faults which developed in relation to the reactivation of inherited basement structures. This ∼ E-W extension evolved during the Barremian-Aptian (?) into the dominant regional NE-SW extension marked by large-scale NW-SE striking normal faults. The stress history also comprises compressional and strike-slip stress regimes associated with a ∼N-S trending σ1 which can be related to the transfer of orogenic stresses from the distant Africa-Eurasia plate boundary at ∼67-60 Ma. Finally, compressional and strike-slip stress regimes associated with a ENE-WSW to ∼E-W trending σ1 dominated since at least ∼17-15 Ma (possibly ∼34 Ma); they are interpreted as the expression of the mid-Atlantic ridge push. These (paleo)stress results are compared and combined with earlier paleostress reconstructions in the northern offshore Lower Congo basin (also belonging to the Central segment of the margin) and in the onshore Congo basin in order to refine the stress record and the timing of tectonic events since the early Cretaceous, thus providing unprecedented constraints on the tectonic history of the West Africa passive margin. This tectonic history includes both extensional and compressional events, and was driven mainly by far-field stresses, either gravitational or tectonic in origin, which are related to interactions between the African plate and surrounding plates.

The structure of a continental intraplate volcanic system and controls from shear zones: Insights into the central Hoggar Cenozoic volcanic province, Northwest Africa, from electrical resistivity images

Continental intraplate volcanic systems, with their locations far from plate tectonic boundaries, are not well understood: the crustal and lithospheric mantle structure of these systems remain enigmatic and there is no consensus on the mechanisms that cause melt generation and ascent. The Cenozoic saw the development of numerous volcanic provinces on the African plate, including within the Central Hoggar, located in Northwest Africa, part of the Tuareg shield. The magmatic activity began at approximately 34 Ma and continued throughout the Quaternary. In order to understand the origins and potential mechanisms that generated the intraplate volcanic activity in the Central Hoggar we aim to image the subsurface architecture, in terms of electrical resistivity, from the surface to the lithospheric mantle. To do so we use magnetotelluric measurements from 40 locations to generate a 3-D electrical resistivity model, over an area of about 100 km by 160 km. Low-resistivity features (i.e., conductors) are observed in the crust that are narrow, linear structures congruent with the boundaries of terranes and prominent fault zones (e.g., Azrou N’Fad). They likely reflect the Pan-African mega-shear zones, which were reactivated throughout the tectonic evolution of the region. The model reveals that these faults are lithospheric-scale. The low-resistivity features likely represent the signatures of past fluid pathways and mineralization. A deeper low-resistivity feature is observed in the upper lithospheric mantle directly beneath the Manzaz and Atakor volcanic districts. It may represent local, small-scale metasomatism of the sub-continental lithospheric mantle, and low-percent partial melting, that sits above a regional, large-scale asthenospheric upwelling associated with the Hoggar swell. It is likely the origin point of the fluids responsible for the overlying anomalies. The results highlight the control of the lithospheric-scale, mega-shear zones on the spatial distribution of the recent Cenozoic volcanic activity, which was influenced by the location of pre-existing structural weaknesses.

The Mystery Deepens: Anomalously Fast Speed of the Indian Lithospheric Plate - A Review

ABSTRACT During certain time windows of the late Cretaceous and early Tertiary the Indian plate travelled northward from deep south with exceptionally fast speed reaching around 15–18 to ~22 cm/yr. This is indeed intriguing and enigmatic because velocities of all other major tectonic plates, in comparison, do not exceed ~7–8 cm/yr and hence the high mobility of the Indian plate remains somewhat mysterious. This study discusses the various efforts carried out during the past four decades, which are aimed at understanding the processes/forces behind this rapid drift of India. On the basis of marine magnetic survey, deep drilling and numerical models, a number of potential causes have been put forward. Some of the important observations that emerged from these studies are, (i) delineation of multi-phase subduction systems within the India-Asia collision corridor, (ii) occurrence of upwelling of more than one mantle plumes and their push force, (iii) anti-correlated velocities of the Indian and African plates and their coupling with the Reunion mantle plume, and (iv) role of mantle plume in the initiation of subduction or convergent margin that implies initiation of the plate tectonics itself. These studies suggest a number of potential causes that could impart the observed high acceleration to the Indian plate. These include lithospheric thinning and geophysical/geochemical characteristics of the Indian plate, weakening of the litho-asthenospheric coupling and the coupling of mantle plume and double subduction. During the past decade, continued addition of concepts and ideas that negate/compliment/supplement preceding studies, comprehend the forces responsible for India’s rapid drift. It is significant to note that most of these suggestions have come up, in quick succession, thus making the unfoldment of this research highly engrossing and interesting.

Assessment of the Crustal Thickness within Southern Bida Basin and Surrounding Basement Rocks, North Central Nigeria, using Gravity Data

The crustal thickness within the Southern Bida Basin has been determined using Bouguer Gravity Data. This study focuses on a region situated in the southern part of the Bida Basin, a significant inland sedimentary basin in North Central Nigeria. Two distinct methods were employed to estimate crustal thickness from Bouguer anomaly values: (i) an empirical relationship between crustal thickness and Bouguer anomaly, and (ii) spectral analysis of the radial wave number. The average crustal thickness was derived by averaging results obtained from both methods. Additionally, a linear equation (HC = 34.39 – 0.17BG) was formulated for the study area, enabling straightforward determination of crustal thickness from any given Bouguer anomaly value. The estimated crustal thickness in the study area ranges from 32 km to 40 km, aligning closely with the overall crustal thickness of Nigeria as reported by Daniyan et al. (2002). The tectonic stability of the study area, situated on the stable African plate, further underscores its significance within the broader geological context of Nigeria.

Induced seismicity at the Laúca reservoir, Angola Craton: Focal mechanisms and implications for the stress field in Western Central Africa

We present the first case of reservoir induced seismicity (RIS) ever reported in the Angola Craton, Laúca reservoir. Impoundment of the reservoir began in late 2017 and seismicity started in March 2018 shortly after the water level reached 86 m. Earthquakes continued to be recorded in the following years, with 287 events detected between March/2018 and April/2024. The largest event had magnitude 3.0 ML. The dam is 156 m tall, and the total reservoir volume is 5,044.85 Hm3. The reservoir area is monitored by two stations, LAUC and ZERO. Seismic data is of high quality, with sharp P- and S-wave arrivals at both stations. We derive a half-space velocity model for the lake area using a composite Wadati diagram and minimization of travel time residuals and locate 90 events with arrivals at both stations. S-to-P converted phases at the surface were used to help constrain hypocentral depths and epicentral locations. We use waveform modeling to determine focal mechanisms for ten events using the program FMNEAR, and invert for the local stress field. We find the faulting regime in the area to be strike-slip and SHMax oriented roughly NE-SW. We compare our results to the broader stress field in western Central Africa and find them to be in agreement with nearby stress determinations from focal mechanisms in the Congo Basin. Our results make an important contribution to the state of knowledge of the stress field in western Central Africa, which can be taken into consideration in future geodynamic models of the Nubian plate as more data is gathered and help further our understanding of stress sources in this region.

Development of smoothed seismicity models for seismic hazard assessment in the Red Sea region

The Red Sea region, situated between the Arabian and African Plates, experiences significant seismic activity due to its tectonic dynamics, with earthquakes ranging from minor to potentially destructive events. This study aims to develop smoothed seismicity models for the region by using an enhanced seismic catalog specific to the Red Sea. This facilitates a detailed spatial and temporal analysis of seismic events, focusing on seismic source characterization essential for probabilistic seismic hazard assessments. A rigorous declustering method excludes foreshocks and aftershocks, focusing on independent seismic events. The analysis uses a spatial grid (0.1∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{\\circ }$$\\end{document} cells in latitude and longitude) to determine seismic event rates, which are then refined using various smoothing techniques. Special attention is given to seismic activity within 0–35 kms of depth, leading to distinct rate models that inform urban development and seismic hazard mitigation strategies in the Red Sea area. These models are crucial for improving resilience, safety, and informed decision-making for urban planning and disaster preparedness, addressing the challenges posed by the region’s tectonic and seismic complexities.

The Neotectonic Deformation of the Eastern Rif Foreland (Morocco): New Insights from Morphostructural Analysis

The Neotectonic Deformation of the Eastern Rif Foreland (Morocco): New Insights from Morphostructural Analysis

Testing alternative tectonic models for the Permian-Pleistocene tectonic development of the Kyrenia Range, N Cyprus: Implications for E Mediterranean Tethyan palaeogeography

Three published alternative tectonic models of the Permian-Pleistocene development of the Kyrenia Range, N Cyprus are tested, supported by new field, geochemical and micropalaeontological evidence: 1. The Kyrenia Range represents the northern continental margin of the S Neotethys, close to its present relative position. The range initiated as a Permian-Cretaceous rift/passive margin, switching to a N-facing active margin during Late Cretaceous-Neogene; 2. The Range was located along the N African continental margin until the Neogene when northward subduction transferred it to the southern margin of the Eurasian plate; 3. The Range is a far-travelled allochthon that was emplaced to near its present position, probably during the Eocene.In the light of regional comparisons, especially with southern Turkey, the combined evidence mainly supports tectonic model 1. Sedimentary and palaeontological data show that the restored stratigraphy of the Kyrenia Range indicates Late Permian initial rifting and Early-Middle Triassic advanced rifting, followed by Jurassic-Early Cretaceous passive margin subsidence. Small exposures of ophiolite-related melange located between the Mesozoic carbonate platform and the overlying latest Cretaceous-Palaeogene deep-water volcanic-sedimentary succession include evidence of HP/LT metamorphism, pointing to Late Cretaceous subduction. MORB/boninites, diabase-gabbro and extensive harzburgitic serpentinite originated as a SSZ ophiolite, together with a possible high-grade metamorphic sole (garnet amphibolite) and an accretionary prism (E-MORB/OIB; metachert). Microfossil evidence indicates exhumation of the melange and the underlying platform prior to Late Maastrichtian. A mass-transport complex formed within a compression-related foredeep during the Middle Eocene. Associated southward thrusting and folding culminated in emergence and subaerial erosion, generating a major unconformity, that was followed by subaerial and then marine deltaic deposits (Late Eocene-Oligocene). Following major Late Miocene southward thrusting, uplift of the Kyrenia Range took place during the Pleistocene, related to collision of the leading edge of the North African plate (Eratosthenes Seamount) with the Eurasian (Anatolian) plate.

Tectonic activity in Gulf of Guinea and Sub-Sahara West Africa: A validation of Freeth (1977) using focal mechanism solutions

Fault plane solutions for a group of 104; 4.0 ≤ Mw ≤ 7.1 earthquakes between January 1979 and December 2016, extracted from the Global Centroid Moment Tensor Project catalog. Were used to investigate the regional tectonic stress regime of the Gulf of Guinea region. The idea is to validate the theory of membrane tectonics put forward by Freeth (1977)[1] in which the tectonic of the Gulf of Guinea and the sub-Sahara West Africa region were described based on Freeth (1977)[1]. The tectonic of the Gulf of Guinea and the sub-Sahara West Africa region are based on the movement of the African plate, we emphasized the use of rigorous statistical tests to decide on the quality and variability of the earthquake focal mechanisms (FMSs) utilized for the stress tensor inversion analysis. To constrain our analysis, we have applied both the Algorithm of Michael and Gauss technique in our stress tensor inversion analysis of FMS obtained from the region, and the results are found to be coherent and in good agreement with each other. Both Michael (1984)[2] and Zalohar and Vrabec (2007)[3] techniques show that the regional tectonic stress regime of the Gulf of Guinea and the sub-Sahara West Africa is extensional, which is in good agreement with the work of Freeth (1977)[1]. However, our investigation concluded that the orientation of the extensional stress regime is the same as the orientation of the movement of the African plate, which is towards the Euro-Asia plate.

Coherent Seismic Anisotropy Pattern Across Southern Africa Revealed by Shear Wave Splitting Measurements

AbstractWe report new PKS, SKS, and SKKS splitting measurements for 88 seismic stations in Namibia, Botswana, South Africa, and Mozambique. When combined with measurements from previous studies, the ensemble of measurements shows a fairly uniform NNE to NE (∼41° on average) fast‐polarization direction (ϕ) and delay time (δt) (∼0.7 s on average) across the entire southern African subcontinent. It is difficult to attribute the NNE‐NE ϕ direction to just one source of anisotropy either within the lithospheric or sublithospheric mantle. We instead propose the observed anisotropy pattern could result from a combination of several sources that together give rise to a pervasive NNE‐NE ϕ direction; (a) fossil anisotropy in the lithospheric mantle resulting from the Neoproterozoic collision of the Congo and Kalahari cratons to form the Damara Belt, (b) movement of the African plate over the asthenosphere, and (c) flow in the upper mantle induced by the African Superplume. In addition, a contribution from anisotropy in the lowermost mantle in the vicinity of the African large low shear velocity province cannot be ruled out.

Late Cretaceous Tectono-Metamorphic Events in the Skyros Upper Metamorphic Unit (Olympus Mountain), Aegean Sea, Greece

Late Cretaceous metamorphic events are known in Crete and the Cyclades from klippen above the External Hellenides. This work extends their occurrence to the North Aegean area within the tectonic units of the Internal Hellenides. New 40Ar/39Ar white mica ages from garnet-bearing micaschists of the Upper Metamorphic Unit of Skyros Island, cropping out in the Skyrian Olympus Mountain, document a Late Cretaceous tectono-metamorphic evolution. Several mica generations have been distinguished using electron probe microanalyses and were dated using the 40Ar/39Ar method: a relict mica older than 96 Ma, followed by a foliation-forming mica of about 88–84 Ma and alteration phases ≤ 68 Ma were recognized. This Cretaceous tectono-metamorphic evolution falls between the closure of the internal Axios/Vardar oceanic basin in the Late Jurassic–Early Cretaceous, and the closure of the external Pindos–Cyclades oceanic basin in the Early Cenozoic. The position of the Upper Metamorphic Unit of Skyros was probably within the evolving Hellenic volcanic/magmatic arc during the continuous subduction of the African plate beneath the European plate. The present tectonic position of the units bearing the Late Cretaceous metamorphic event is the result of the Cenozoic tectonic emplacement onto the more external units across the Hellenides from the Pelagonian to the Pindos–Cyclades domain.

Differential synthetic aperture radar (SAR) interferometry for detection land subsidence in Derna City, Libya

Abstract The country of Libya, situated on the Mediterranean fault zone, has a distinctive geodynamic regime due to the interplay between the Eurasian and African plates, which governs its tectonic evolution. In addition to its seismological significance, Libya is characterized by numerous subsidence and slope instabilities in regions with steep terrain. These geological phenomena have significant consequences for the built environment, as they pose an immediate danger to entire towns and essential infrastructure. Furthermore, infrequent weather phenomena, such as intense precipitation and thunderstorms, when coupled with the geological characteristics of some regions and the presence of seismically active terrain, have the potential to trigger landslide and land subsidence, resulting in significant harm to vital infrastructure. The current study utilizes the DInSAR technology to identify distinct subsidence occurrences that were induced by intense precipitation in coastal regions of Libya, specifically in Derna. These areas experienced significant flooding resulting in collapses during September 2023. A total of six pairs of co-event Interferometric Synthetic Aperture Radar (SAR) were utilized to generate displacement maps in the vertical, north-east, and north-west directions for the purpose of analysing the deformations. The aforementioned activities are conducted via Sentinel-1A images, which is freely accessible through the Copernicus program. Additionally, flood-prone zones were defined using Sentinel-1 GRD imagery. The Interferometric processing revealed multiple areas of subsidence. Subsidence rates of up to −14 cm were found in Derna city’s urban cores after flood. The findings suggest that subsidence may have an effect on the flood-proneness of the region of Derna City as Ground subsidence also occurred in the period immediately before the earthquake, at a rate of −14 cm.

Kaş Bay: Evidence of a 20 km-diameter complex impact structure on the Turkey-Greece frontier

Extensive field work, mineralogical and petrographic investigations show strong evidence for a complex, hypervelocity impact structure protruding into the Mediterranean Sea at the Turkey-Greece border. The Kaş Bay structure with a diameter of around 20 km, is structurally altered, since it coincides with the triple point of the Anatolian, Aegean, and African plates. The target rocks, entirely comprising sedimentary carbonate, show evidence of shock metamorphism, along with a wealth of significant finds and numerous indications of a clear and strong impact overprint. A Pleistocene age is inferred from related stratigraphical evidence.

SYNERGY OF ADVANCED PROCESSING TECHNIQUES USING COPERNICUS SAR AND OPTICAL SATELLITE IMAGERY TO DETECT GROUND DISPLACEMENTS: THE CASE STUDIES OF PYRGOS AND PAREKKLISIA VILLAGES IN CYPRUS

Abstract. Cyprus has a long history of destructive tectonic activity and related geohazards. This is mainly due to its location on the Mediterranean fault zone and the interaction of the Eurasian and African plates. To study the occurrence of land displacements on a national scale, various space-based monitoring techniques exploiting the Copernicus program’s datasets were studied using Sentinel-1 and Sentinel-2 satellite images for the period of 2016–2021. More specifically, differential spectral indices were calculated by subtracting the reference 2016 Sentinel-2 image from an image for every year until 2021, and a parallelised version of Persistent Scatterer Interferometry (PSI) was conducted using a time series of Sentinel-1 data over the same period, to identify ground displacements over time. The PSI analysis in the area around Pyrgos and Parekklisia villages, detected Line-of-Sight (LoS) uplift phenomena of a maximum rate of 8 mm/y, in ascending and descending Sentinel-1 satellite passes. Similarly, deformation was identified from optical image processing. The integration of both techniques provided qualitative and quantitative information about ground deformation events in both areas, showcasing a complementarity of results obtained, with PSI detecting displacements in urban/built-up areas, and multispectral change detection in rural environment. In terms of correlation, the two techniques showed a fit of 31.34% in ascending and 26% in descending pass, providing additional information on the size of affected areas. This synergistic approach facilitates the systematic monitoring of areas of interest, providing significant and timely information to decision-makers, to take actions and adopt protective measures when and where it is required.

The geomorphology and neotectonics of the Vaalputs Radioactive Waste Disposal Facility site, Namaqualand, South Africa: Palaeoseismological and geodynamic implications

Abstract The safe disposal of radioactive waste products remains a challenging and controversial issue, yet their burial in a stable geological environment is the option favoured by most countries. Past investigations of the Vaalputs facility in South Africa’s semi-arid Bushmanland Plateau demonstrated its suitability for the disposal of low-level, short-lived (<300 years) radioactive waste, but also the need for more data on hazardous seismotectonic and climatic processes for the potential storage of longer-lived spent nuclear fuel. We review and then provide new information on the regional geomorphological and morphotectonic features of the Bushmanland Plateau, focusing on pedogenic features and compressive shear fractures in the trenches excavated over the past two decades. The fractures, provisionally dated between ~75 ka and ~46 ka, resemble east-verging thrust faults of limited horizontal displacement (≤1 m) and die out at depths of 4 m. Having discounted a pedogenic origin, the shear fractures likely represent stress relief structures triggered by the seismogenic reactivation of one of the Quaternary active faults in the area. The most likely candidate is the Santab Fault Zone (SFZ), which has a strike length ≥20 km and a throw of up to ~5 m at its closest point (8 km) to the Vaalputs site. Regional remote sensing and off-site investigations in the Bushmanland Plateau relate the neotectonic episodes at Vaalputs and environs to a late Pleistocene climax of the Namaqualand seismic source zone. This zone is characterised by the Wegener Stress Anomaly, a long-lived ~northwest-southeast oriented compression that, at its apex in the Late Santonian, caused large scale folding and thrusting not only in Bushmanland and parts of central-southern Namibia, but also swept across the entire African plate.

Continental rift asymmetry and segmentation – contributions from the African plate

Prior to the mid-1980s, continental rifts were generally depicted as roughly symmetrical graben, with little complexity along the strike of the basin. In reality, most continental rifts originate as asymmetric, large-scale half graben that are strongly segmented along-strike. This basic architecture does not usually persist unaltered to the rift-to-drift transition but can commonly be observed in both failed continental rift systems and along the passive margins of oceanic plates where rifting succeeded. These geometric aspects of continental rifting have fundamental implications for both hydrocarbon exploration and understanding the causes and processes of continental rupture. Contributions to our understanding of rift asymmetry and segmentation have spanned the past seven decades and come from many settings around the world. However, Africa has played a key role in this undertaking, due to both the presence of well-exposed, active extensional basins in the Afro-Arabian rift system and numerous buried Mesozoic and early Cenozoic rift systems.The first well-documented examples of both rift asymmetry and along-strike segmentation occurred in the Gulf of Suez, northern Egypt, in the 1970s. These early ideas were greatly enhanced and expanded by later studies in both the Western and Eastern branches of the East Africa Rift, including field and refraction/reflection seismic work in Burundi, the Democratic Republic of the Congo, Ethiopia, Kenya, Malawi, Tanzania, and Uganda during the 1980s and 1990s. Asymmetry and segmentation were recognized to be fundamental characteristics of both magmatic and amagmatic rifts, although important differences regarding scale and temporal evolution are evident. At smaller scales, hard-linkage of growing and interacting extensional faults was another key component of subsurface interpretation in the Gulf of Suez by the mid-1970s. Later, outcrop studies in East Africa, supported by subsurface seismic and well data, led to greatly improved models of syn-tectonic sedimentation in step with the advances in understanding of structural geometries. Most recently, concepts derived from the continental margins of other plate settings have been incorporated with the earlier African observations to produce new models of the tectonic evolution of the Red Sea and Gulf of Aden, which in turn has then influenced our overall understanding of the progression from continental to oceanic rifting. This is an ongoing topic of research and discussion that will certainly proceed for many years and require the collaboration of both the international scientific community and local African earth science expertise.