AF-derived Stem Cells Research Articles

Amniotic fluid-derived stem cell potential for therapeutic and surgical use: A review of the literature.

Spina bifida is a debilitating neutral tube defect affecting many infants. The impact and severity of spina bifida depends on whether the patient exhibits a closed defect, spina bifida occulta, or an open defect, spina bifida aperta. Patients with spina bifida have physical and mental disabilities which merit further research into less invasive, more successful treatments. In addition to serving as protection for the growing fetus and facilitating nutrient exchange, amniotic fluid (AF) is a rich source of a mixed population of stem cells. As such, in vitro culture of AF-derived stem cells has shown promise among therapeutic and surgical applications. We present a critical evaluation of the current preclinical efforts, amniotic fluid-derived stem cell (AFSC) culture process, and the subsequent therapeutic application, with a focus on improvements for spina bifida outcomes in the pediatric patient population. An evidence - based literature review to investigate the current literature surrounding AFSC culture and use, with an emphasis on the benefits for spina bifida treatment. 47 literature sources from PubMed and three studies from ClinicalTrials.gov. This review synthesizes the current literature, which shows promising data on AFSC pluripotency, as well as successful in utero coverage from AFSC - supported environments in a multitude of animal models.

Mechanical Stimulation and Diameter of Fiber Scaffolds Affect the Differentiation of Rabbit Annulus Fibrous Stem Cells.

Degeneration of the annulus fibrosus (AF), an important structure of the intervertebral disc, is one of the main causes of degenerative disc disease. Fabrication of scaffolds replicating the stratified microstructure of the AF is critical for the successful regeneration of AF. In this study, we cultured rabbit AF-derived stem cells (AFSCs) using fabricated electrospun fibrous poly-L-lactic acid scaffolds with different diameters. We applied cyclic tensile strain (CTS) on the scaffolds to regulate the differentiation of AFSCs into specific cell types that resided at the inner, middle, and outer zones of the AF. We found that the morphologies of AFSCs on the smaller-fiber-diameter scaffolds were nearly round, whereas spindle-like cells morphologies were observed on large-diameter scaffolds. CTS enhanced these phenomena and made the cells slender. The expression levels of collagen-I in cells increased as a function of the fiber diameter, whereas collagen-II and aggrecan exhibited opposite trends. Moreover, the application of CTS upregulated the gene expressions of collagen-I, collagen-II, and aggrecan. Overlaying the scaffolds with different CTS-stimulated cells could eventually lead to engineered AF tissues with hierarchical structures that approximated the native AF tissue. Thus, the proposed methodologies could be potentially applied for AF regeneration.

Regeneration of annulus fibrosus tissue using a DAFM/PECUU-blended electrospun scaffold

Low back pain and disc degeneration affect quality of life and imposes an enormous financial burden. Although annulus fibrosus (AF) tissue engineering provides an alternative therapeutic possibility in the treatment of degenerative intervertebral disc disease, it is restricted by the biochemical properties, organizational structure, and mechanical characteristics of the scaffold. The ideal scaffold should closely mimic the natural extracellular matrix (ECM) in structure and function for long-term stability and survival. Poly(ether carbonate urethane) urea (PECUU) can be electrospun into nanofibrous scaffolds to mimic ECM architecture with the appropriate mechanical properties. However, PECUU scaffolds lack the bioactivity of natural ECM. On the other hand, a decellularized annulus fibrosus matrix (DAFM) has good biocompatibility and biodegradability and has been shown to promote secretion of AF-related ECM. Herein, DAFM/PECUU-blended electrospun scaffolds were fabricated with the help of coaxial electrospinning technology for the first time. AF-derived stem cells were cultured on DAFM/PECUU electrospun scaffolds, and cellular metabolic activity, morphology, and gene expression assays as well as AF-related ECM synthesis were performed. The results showed that AF-derived stem cells proliferated well on the scaffolds. Gene expression and ECM secretion of collagen type I and II and aggrecan from AF-derived stem cells cultured on DAFM/PECUU electrospun scaffolds were higher than from those on PECUU fibrous scaffolds. Thus, DAFM/PECUU electrospun scaffolds are a potential candidate for AF tissue engineering applications.

Substrate Topography Regulates Differentiation of Annulus Fibrosus-Derived Stem Cells via CAV1-YAP-Mediated Mechanotransduction

Regeneration of annulus fibrosus (AF) through tissue engineering techniques shows promise as a treatment for patients with degenerative disc disease (DDD). Yet, it remains challenging because of the intrinsic heterogeneity of AF tissue and shortage of in-depth knowledge of its structure-function correlation. In the current study, we fabricated fibrous poly(ether carbonate urethane)urea (PECUU) scaffolds with various fiber sizes to mimic the microstructural feature of native AF and aimed to regulate the differentiation of AF-derived stem cells (AFSCs) by controlling the topographical cues of the scaffold. We found that the morphology of AFSCs varied significantly on scaffolds with various fiber sizes. Meanwhile, the expression of the phenotypic marker genes of outer AF was up-regulated on scaffolds with large fibers. Meanwhile, enhanced expression of the phenotypic marker genes of inner AF was seen on scaffolds with small fibers. Such topography-dependent gene expression in AFSCs approximated the biochemical profile of AF tissue in various zones. Moreover, cell spreading and nucleus translocation of Yes-associated protein (YAP) were facilitated with increased fiber size. Formation and maturation of focal adhesions of AFSCs were also promoted. We also found that Caveolin-1 (CAV1) positively modulated the mechano-responses of YAP in response to substrate topography. In conclusion, depending on the activation of the CAV1-YAP mechanotransduction axis, tuning the fiber size of scaffolds can effectively induce changes in cell shape, adhesions, and extracellular matrix expression. This work may therefore provide new insights in the design of novel materials toward AF tissue regeneration.

Regulation of differentiation of annulus fibrosus-derived stem cells using heterogeneous electrospun fibrous scaffolds.

BackgroundTissue engineering of the annulus fibrosus (AF) shows promise as a treatment for patients with degenerative disc disease (DDD). However, it remains challenging due to the intrinsic heterogeneity of AF tissue. Fabrication of scaffolds recapitulating the specific cellular, componential, and microstructural features of AF, therefore, is critical to successful AF tissue regeneration.MethodsPoly-L-lactic acid (PLLA) fibrous scaffolds with various fiber diameters and orientation were prepared to mimic the microstructural characteristics of AF tissue using electrospinning technique. AF-derived stem cells (AFSCs) were cultured on the PLLA fibrous scaffolds for 7 days.ResultsThe morphology of AFSCs significantly varied when cultured on the scaffolds with various fiber diameters and orientation. AFSCs were nearly round on scaffolds with small fibers. However, they became spindle-shaped on scaffolds with large fibers. Meanwhile, upregulated expression of collagen-I gene happened in cells cultured on scaffolds with large fibers, while enhanced expression of collagen-II and aggrecan genes was seen on scaffolds with small fibers. The production of related proteins also showed similar trends. Further, culturing AFSCs on a heterogeneous scaffold by overlaying membranes with different fiber sizes led to the formation of a hierarchical structure approximating native AF tissue.ConclusionFindings from this study demonstrate that fibrous scaffolds with different fiber sizes effectively promoted the differentiation of AFSCs into specific cells similar to the types of cells at various AF zones. It also provides a valuable reference for regulation of cell differentiation and fabrication of engineered tissues with complex hierarchical structures using the physical cues of scaffolds.The translational potential of this articleEffective AF repair is an essential need for treating degenerative disc disease. Tissue engineering is a promising approach to achieving tissue regeneration and restoring normal functions of tissues. By mimicking the key structural features of native AF tissue, including fiber size and alignment, this study deciphered the effect of scaffold materials on the cell differentiation and extracellular matrix deposition, which provides a solid basis for designing new strategies toward more effective AF repair and regeneration.

Decellularized Annulus Fibrosus Matrix/Chitosan Hybrid Hydrogels with Basic Fibroblast Growth Factor for Annulus Fibrosus Tissue Engineering.

Low back pain caused by degenerative disc disease affects many people worldwide and brings huge economical burden. Thus, attentions have focused on annulus fibrosus (AF) tissue engineering for treatment of intervertebral disc degeneration. To engineer a functional replacement for the AF, it is important to fabricate scaffolds that mimic the structural and mechanical properties of native tissue. AF-derived stem cells are promising seed cells for AF tissue engineering due to their tissue specificity. In the present study, decellularized AF matrix (DAFM)/chitosan hybrid hydrogels were fabricated using genipin as a crosslinker. AF stem cells were cultured on hydrogel scaffolds with or without basic fibroblast growth factor (bFGF), and cell proliferation, morphology, gene expression, and AF tissue synthesis were examined. Overall, more collagen-I, collagen-II, and aggrecan were secreted by AF stem cells grown on hydrogels with bFGF compared to those without. These results support the application of DAFM/chitosan hybrid hydrogels as an appropriate candidate for AF tissue engineering. Furthermore, incorporation of bFGF into hydrogels promoted AF-related tissue synthesis.Impact StatementThe investigation of annulus fibrosus (AF)-related tissue secretion and gene expression in extracellular matrix (ECM) of AF-derived stem cells (AFSCs) provided theoretical and practical basis for the choice of scaffold materials and growth factors for AF tissue engineering. The innovations of the present work are obvious. First, AFSCs were used because they are more easily differentiated into AF cells, thereby producing more AF-related ECM. Second, the decellularized AF matrix (DAFM) was derived from native AF tissue, but had reduced immunogenicity after decellularization. Furthermore, the DAFM structure mimicked the fibrous network of actual AF tissue, which was advantageous to AFSC adhesion and growth. Third, basic fibroblast growth factor was successfully incorporated into the DAFM, showed gradual sustained release, and effectively promoted production of AF tissue ECM factors collagen-I, collagen-II, aggrecan, and glycosaminoglycan.

Substrate stiffness- and topography-dependent differentiation of annulus fibrosus-derived stem cells is regulated by Yes-associated protein

Annulus fibrosus (AF) tissue engineering has attracted increasing attention as a promising therapy for degenerative disc disease (DDD). However, regeneration of AF still faces many challenges due to the tremendous complexity of this tissue and lack of in-depth understanding of the structure-function relationship at cellular level within AF is highly required. In light of the fact that AF is composed of various types of cells and has gradient mechanical, topographical and biochemical features along the radial direction. In this study, we aimed to achieve directed differentiation of AF-derived stem cells (AFSCs) by mimicking the mechanical and topographical features of native AF tissue. AFSCs were cultured on four types of electrospun poly(ether carbonate urethane)urea (PECUU) scaffolds with various stiffness and fiber size (soft, small size; stiff, small size; soft, large size and stiff, large size). The results show that with constant fiber size, the expression level of the outer AF (oAF) phenotypic marker genes in AFSCs increased with the scaffold stiffness, while that of inner AF (iAF) phenotypic marker genes showed an opposite trend. When scaffold stiffness was fixed, the expression of oAF phenotypic marker genes in AFSCs increased with fiber size. While the expression of iAF phenotypic marker genes decreased. Such substrate stiffness- and topography-dependent changes of AFSCs was in accordance with the genetic and biochemical distribution of AF tissue from the inner to outer regions. Further, we found that the Yes-associated protein (YAP) was translocated to the nucleus in AFSCs cultured with increasing stiffness and fiber size of scaffolds, yet it remained mostly phosphorylated and cytosolic in cells on soft scaffolds with small fiber size. Inhibition of YAP down-regulated the expression of tendon/ligament-related genes, whereas expression of the cartilage-related genes was upregulated. The results illustrate that matrix stiffness is a potent regulator of AFSC differentiation. Moreover, we reveal that fiber size of scaffolds induced changes in cell adhesions and determined cell shape, spreading area, and extracellular matrix expression. In all, both mechanical property and topography features of scaffolds regulate AFSC differentiation, possibly through a YAP-dependent mechanotransduction mechanism. Statement of SignificancePhysical cues such as mechanical properties, topographical and geometrical features were shown to profoundly impact the growth and differentiation of cultured stem cells. Previously, we have found that the differentiation of annulus fibrosus-derived stem cells (AFSCs) could be regulated by the stiffness of scaffold. In this study, we fabricated four types of poly(ether carbonate urethane)urea (PECUU) scaffolds with controlled stiffness and fiber size to explore the potential of induced differentiation of AFSCs. We found that AFSCs are able to present different gene expression patterns simply as a result of the stiffness and fiber size of scaffold material. This work has, for the first time, demonstrated that larger-sized and higher-stiffness substrates increase the amount of vinculin assembly and activate YAP signaling in pre-differentiated AFSCs. The present study affords an in-depth comprehension of materiobiology, and be helpful for explain the mechanism of YAP mechanosensing in AF in response to biophysical effects of materials.

Identification and Characterizations of Annulus Fibrosus-Derived Stem Cells.

Annulus fibrosus (AF) injuries are common in degenerative disc disease (DDD) and can lead to substantial deterioration of the intervertebral disc. However, repair or regeneration of AF remains challenging. Recently, we have found that there exists a subpopulation of cells, which form colonies in vitro and could self-renew, in AF tissue. These cells express typical surface antigen molecules of mesenchymal stem cells, including CD29, CD44, and CD166. They also express common stem cell markers such as Oct-4, nucleostemin, and SSEA-4. In addition, they can be induced to differentiate into adipocytes, osteocytes, and chondrocytes. Being AF tissue-specific, such AF-derived stem cells may potentially be an ideal candidate for DDD treatments using stem cell-based cell therapies or tissue engineering approaches.

Matrix elasticity-dependent differentiation of annulus fibrous-derived stem cells

Matrix elasticity-dependent differentiation of annulus fibrous-derived stem cells

Modulation of the gene expression of annulus fibrosus-derived stem cells using poly(ether carbonate urethane)urea scaffolds of tunable elasticity

Annulus fibrosus (AF) injuries commonly lead to substantial deterioration of the intervertebral disc (IVD). While tissue engineering has recently evolved into a promising approach for AF regeneration, it remains challenging due to the cellular, biochemical, and mechanical heterogeneity of AF tissue. In this study, we explored the use of AF-derived stem cells (AFSCs) to achieve diversified differentiation of cells for AF tissue engineering. Since the differentiation of stem cells relies significantly on the elasticity of the substrate, we synthesized a series of biodegradable poly(ether carbonate urethane)urea (PECUU) materials whose elasticity approximated that of native AF tissue. When AFSCs were cultured on electrospun PECUU fibrous scaffolds, the gene expression of collagen-I in the cells increased with the elasticity of scaffold material, whereas the expression of collagen-II and aggrecan genes showed an opposite trend. At the protein level, the content of collagen-I gradually increased with substrate elasticity, while collagen-II and GAG contents decreased. In addition, the cell traction forces (CTFs) of AFSCs gradually decreased with scaffold elasticity. Such substrate elasticity-dependent changes of AFSCs were similar to the gradual transition in the genetic, biochemical, and biomechanical characteristics of cells from inner to outer regions of native AF tissue. Together, findings from this study indicate that AFSCs, depending on the substrate elasticity, have strong tendencies to differentiate into various types of AF-like cells, thereby providing a solid foundation for the tissue engineering applications of AFSCs. Statement of significanceRepairing the annulus fibrosus (AF) of intervertebral disc (IVD) is critical for the treatment of disc degeneration disease, but remains challenging due to the significant heterogeneity of AF tissue. Previously, we have identified rabbit AF-derived stem cells (AFSCs), which are AF tissue-specific and hold promise for AF regeneration. In this study, we synthesized a series of poly(ether carbonate urethane)ureas of various elasticity (or stiffness) and explored the potential of induced differentiation of AFSCs using electrospun PECUU scaffolds. This work has, for the first time, found that AFSCs are able to present different gene expression patterns simply as a result of the elasticity of scaffold material. Therefore, our findings will help supplement current knowledge of AF tissue regeneration and may benefit a diversified readership from scientific, engineering, and clinical settings whose work involves the biology and tissue engineering of IVD.

Gene expression modulation in TGF-β3-mediated rabbit bone marrow stem cells using electrospun scaffolds of various stiffness.

Tissue engineering has recently evolved into a promising approach for annulus fibrosus (AF) regeneration. However, selection of an ideal cell source, which can be readily differentiated into AF cells of various regions, remains challenging because of the heterogeneity of AF tissue. In this study, we set out to explore the feasibility of using transforming growth factor-β3-mediated bone marrow stem cells (tBMSCs) for AF tissue engineering. Since the differentiation of stem cells significantly relies on the stiffness of substrate, we fabricated nanofibrous scaffolds from a series of biodegradable poly(ether carbonate urethane)-urea (PECUU) materials whose elastic modulus approximated that of native AF tissue. We cultured tBMSCs on PECUU scaffolds and compared their gene expression profile to AF-derived stem cells (AFSCs), the newly identified AF tissue-specific stem cells. As predicted, the expression of collagen-I in both tBMSCs and AFSCs increased with scaffold stiffness, whereas the expression of collagen-II and aggrecan genes showed an opposite trend. Interestingly, the expression of collagen-I, collagen-II and aggrecan genes in tBMSCs on PECUU scaffolds were consistently higher than those in AFSCs regardless of scaffold stiffness. In addition, the cell traction forces (CTFs) of both tBMSCs and AFSCs gradually decreased with scaffold stiffness, which is similar to the CTF change of cells from inner to outer regions of native AF tissue. Together, findings from this study indicate that tBMSCs had strong tendency to differentiate into various types of AF cells and presented gene expression profiles similar to AFSCs, thereby establishing a rationale for the use of tBMSCs in AF tissue engineering.

Identification of rabbit annulus fibrosus-derived stem cells.

Annulus fibrosus (AF) injuries can lead to substantial deterioration of intervertebral disc (IVD) which characterizes degenerative disc disease (DDD). However, treatments for AF repair/regeneration remain challenging due to the intrinsic heterogeneity of AF tissue at cellular, biochemical, and biomechanical levels. In this study, we isolated and characterized a sub-population of cells from rabbit AF tissue which formed colonies in vitro and could self-renew. These cells showed gene expression of typical surface antigen molecules characterizing mesenchymal stem cells (MSCs), including CD29, CD44, and CD166. Meanwhile, they did not express negative markers of MSCs such as CD4, CD8, and CD14. They also expressed Oct-4, nucleostemin, and SSEA-4 proteins. Upon induced differentiation they showed typical osteogenesis, chondrogenesis, and adipogenesis potential. Together, these AF-derived colony-forming cells possessed clonogenicity, self-renewal, and multi-potential differentiation capability, the three criteria characterizing MSCs. Such AF-derived stem cells may potentially be an ideal candidate for DDD treatments using cell therapies or tissue engineering approaches.

The potential of amniotic fluid stem cells for cellular therapy and tissue engineering

Introduction: Foetal cells present in amniotic fluid (AF) have been used for many years to perform prenatal genetic screening. Recent reports suggested that these cells might have additional benefits. AF contains, in addition to committed and differentiated cells, a subpopulation with stem cell characteristics. AF-derived stem cells (AFS) have functions found in mesenchymal stem cells, but in addition, exhibit a potent expansion capacity and plasticity. AFS are able to undergo multi-lineage differentiation and produce progeny indicative of all three germ layers.Areas covered: The experimental approaches available to isolate AFS and their potential for tissue engineering, the repair of organs through cell replacement and tissue regeneration.Expert opinion: The deployment of AFS for tissue regeneration offers advantages over the use of embryonic or adult stem cells: i) AF represents a convenient and non-contested source for obtaining stem cells; ii) their derivation is relatively simple and rapid; iii) no feeder layers are required for their cultivation; iv) they display no spontaneous differentiation in culture; and v) their stem cell phenotype is not affected by long-term storage. The application of AFS for tissue replacement therapies in vivo is at a very early stage, but existing studies indicate great potential for clinical use.

Amniotic Fluid-Derived Mesenchymal Stem Cells Lead to Bone Differentiation when Cocultured with Dental Pulp Stem Cells

Mesenchymal stem cells are present in many tissues of the human body, including amniotic fluid (AF) and dental pulp (DP). Stem cells of both AF and DP give rise to a variety of differentiated cells. In our experience, DP stem cells (DPSCs) display a high capacity to produce bone. Therefore, our aim was to investigate if AF-derived stem cells (AFSCs) were able to undergo bone differentiation in the presence of DPSCs. AFSCs were seeded under three different conditions: (i) cocultured with DPSCs previously differentiated into osteoblasts; (ii) cultured in the conditioned medium of osteoblast-differentiated DPSCs; (iii) cultured in the osteogenic medium supplemented with vascular endothelial growth factor and bone morphogenetic protein-2 (BMP-2). Results showed that AFSCs were positive for mesenchymal markers, and expressed high levels of Tra1-60, Tra1-80, BMPR1, BMPR2, and BMP-2. In contrast, AFSCs were negative for epithelial and hematopoietic/endothelial markers. When AFSCs were cocultured with DPSCs-derived osteoblasts, they differentiated into osteoblasts. A similar effect was observed when AFSCs were cultured in the presence of a conditioned medium originated from DPSCs. We found that osteoblasts derived from DPSCs released large amounts of BMP-2 and vascular endothelial growth factor into the culture medium and that those morphogens significantly upregulate RUNX-2 gene, stimulating osteogenesis. This study highlights the mechanisms of osteogenesis and strongly suggests that the combination of AFSCs with DPSCs may provide a rich source of soluble proteins useful for bone engineering purposes.