Aerogel Materials Research Articles

Lignin Nanofiber Flexible Carbon Aerogels for Self-Standing Supercapacitors.

Renewable feedstocks are sought for clean technology applications, including energy storage applications. In this study, LignoForce™ lignin, a biobased aromatic polymer commercially isolated from wood, was fractioned into two parts using acetone, and the resulting lignin fractions had distinct thermo-rheological behavior. These two fractionated lignins were combined in various ratios and transformed into nanofibers by electrospinning. Subsequently, electrospun fiber materials were disrupted by agitating the mats in water, and the materials were transformed into ultralight 3D aerogels through lyophilization and post-process controlled heating. Using only this combination of two fractions, the morphology of lignin nanofibers was tailored by heat treatment, resulting in lignin aerogels with high flexibility and significant shape recovery properties. Various microscale structures of lignin fibers impacted the resulting physical properties of the elastic aerogel materials, such as resilience, compressive strength, and electrical conductivity for the corresponding carbonized samples. By exploiting lignin's sensitivity to heat and tailoring the thermal properties of the lignin through fractionation, the work provided an interesting path to form robust lignin-derived functional materials without any toxic chemical additives and significant ability to serve as free-standing electrodes with specific capacitance values better than some graphene-based supercapacitors.

Experimental study on the thermal insulation performance of semi-transparent materials based on convection heating method

Radiation heat transfer inside the aerogel materials belongs to medium radiation, so different heating methods have different measurement results of thermal conductivity. For aerogel materials applied in high temperature air flow environment (aerospace field), since the real boundary conditions of aerogel materials during operation can be simulated by convection heating method (CHM), the combustion-gas wind tunnel device based on two-stages atomization, two-stages combustion/mixing mode is constructed, and the performance test is conducted. The operation safety and combustion performance of the device meet the test requirements, so the thermal conductivity test of aerogel materials can be carried out. When the average temperatures are 469 K, 622 K and 763 K respectively, the effective thermal conductivity (ETC) measured by the CHM is smaller than that measured by the thermal conduction heating method (TCHM), which decreases by 2.7 %, 7.84 % and 9.23 % respectively. The CHM solves the limitations of the TCHM, so the ETC of aerogel materials measured by CHM is more valuable for the design of thermal protection system.

Determination of seven phenoxy carboxylic acid herbicides in water using dispersive solid phase extraction coupled with ultra-high performance liquid chromatography-tandem mass spectrometry based on metal-organic framework composite aerogel

Phenoxy carboxylic acid herbicides (PCAs) are difficult to degrade and, thus, pose significant threats to the environment and human health. The limit for 2,4-dichlorophenoxyacetic acid is 30 μg/L in China's standards for drinking water quality, 70 μg/L in the United States' drinking water standards, and 30 μg/L in the World Health Organization's guidelines for drinking water quality. Therefore, the development of an effective detection method for trace PCAs in water is a crucial endeavor. Metal-organic frameworks (MOFs) are novel porous materials that possess advantages such as a large specific surface area, adjustable pore size, and abundant active sites. They exhibit excellent adsorption capability for various compounds. However, the applications of MOFs as adsorbents are limited. For example, the process of isolating powdered MOFs from aqueous solutions is laborious, and microporous MOFs exhibit limited surface affinity, which decreases their mass transfer efficiency in the liquid phase. MOF crystals can be embedded in a substrate to overcome these limitations. Aerogels are obtained by drying hydrogels, which are hydrophilic polymers with a three-dimensional crosslinked network structure. Spongy aerogel materials exhibit unique structural properties such as high porosity, large pore volume, ultralow density, and easy tailorability. When MOFs are combined with an aerogel, their efficient and selective adsorption properties are preserved. In addition, MOF aerogels exhibit a hierarchical porous structure, which enhances the affinity and mass transfer efficiency of the MOF for target molecules. At present, MOF aerogels are primarily prepared by freeze-drying or using supercritical carbon dioxide. These drying processes require significant amounts of energy and time. Hence, the development of greener and more efficient methods to prepare skeleton aerogels is urgently needed. In this study, we prepared an environment-friendly aerogel at ambient temperature and pressure without the use of specialized drying equipment. This ambient-dried MOF composite aerogel was then used for the dispersive solid phase extraction (DSPE) of seven PCAs from environmental water, followed by ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The key parameters affecting the efficiency of DSPE, including the extraction conditions, ratio of MIL-101(Fe)-NH2 to sodium alginate, pH of the aqueous samples, extraction time, ionic strength (salinity), and elution conditions, such as the elution solvent ratio, elution time, and elution volume, were investigated to obtain optimal extraction efficiency. The adsorbent could adsorb the target contaminants within 12 min, and the analytes could be completely desorbed within 30 s by elution with 4 mL of 1.5% (v/v) formic acid in methanol solution. The water samples could be analyzed without pH adjustment. The main adsorption mechanisms were electrostatic interactions and π-π conjugation. Thus, a new method based on MOF aerogels coupled with UHPLC-MS/MS was developed for the determination of the seven PCA residues in water. The calibration curves for the seven PCAs showed good linearity (r2≥0.9986), with limits of detection (LODs) and quantification (LOQs) ranging from 0.30 to 1.52 ng/L and from 1.00 to 5.00 ng/L, respectively. Good intra- and inter-day precision values of 6.5%-17.1% and 7.4%-19.4%, respectively, were achieved under low (8 ng/L), medium (80 ng/L), and high (800 ng/L) spiking levels. The developed method was applied to the detection of PCAs in surface water, seawater, and waste leachate, and the detected mass concentrations ranged from 0.6 to 19.3 ng/L. Spiked recovery experiments were conducted at mass concentrations of 8, 80, and 800 ng/L, and the recoveries ranged from 61.7% to 120.3%. The proposed method demonstrates good sensitivity, precision, and accuracy, and has potential applications in the detection of trace PCAs in environmental water.

Developing Lightweight Silanized Cellulose Ultramaterials as the Strongest Engineered Aerogel

AbstractSilica aerogel materials exhibit exceptional properties, including unique light, heat, fluid, and ion characteristics with vast potential. Despite similarities in composition to glass, silica aerogel lacks ductility and is prone to breakage upon impact. Therefore, the development of advanced engineering aerogel ultra materials that combine the mechanical strength of engineered materials with the ultralight superinsulation of aerogels remains a significant challenge. Herein, a multidimensional and multiscale gradient‐pore strategy is proposed for the scalable production of nanostructured silanized cellulose (SiCell) nanofibrous frameworks through colloidal self‐assembly using an active earth‐abundant biopolymer from the wood as a functional component. The configuration of the SiCell/polymer‐crosslinked silica‐aerogel‐powder (SiAP)‐locked structure creates a regional framework that forms SiCell/polymer‐crosslinked SiAP‐locked aerogels (SiCSiPA) with a 3D nanoporous architecture. With an ultralow thermal conductivity of 15.9 mW m−1 K−1, the lightweight super insulating SiCSiPA emerges as a prime candidate for thermal insulation, offering exceptional strength for practical applications. Moreover, SiCSiPA exhibits superior strength, stiffness, and toughness, making it the best insulating material. Owing to its outstanding strength‐to‐weight ratio and robust thermomechanical stability, SiCSiPA introduces a new technology for lightweight construction applications requiring superior thermal insulation.

Calcium alginate/Polyaniline double network aerogel electrode for compressible and high electrochemical performance integrated supercapacitors

As a new type of energy storage device, supercapacitors have attracted more and more attention due to their excellent performance. However, the current electrode materials have limited specific surface area and cannot meet the needs of high energy storage. The aerogel material is a 3D network structure containing interconnected micro-nano structures, and also has hierarchical pores on the micro, meso and macro scales. The microporous and mesoporous structures can provide high specific surface area, while the macropores provide channels for the entry of active substances. In this study, calcium alginate (CA)/polyaniline (PANI)/reduced graphene oxide (RGO) aerogels based on double network structure with high mechanical property and excellent electrochemical performance are successfully constructed by sol-gel method. Due to the double network structure, the CA/PANI/RGO aerogel exhibits self-supported 3D porous network structures with high surface areas (330.3 m2/g). CA/PANI/RGO composite aerogel electrode shows high specific capacitance (908 F/g at 1 A/g) and excellent rate performance. The initial capacitance of more than 80 % can be maintained after 10,000 times of charge/discharge cycle test. Most importantly, the assembled flexible solid-state supercapacitor has high specific capacitance (885 F/g at 1 A/g) and mechanical flexibility (92.6 % of the capacitance retention after 1000 bending cycles).

Multifunctional Wood Composite Aerogel with Integrated Radiant Cooling and Fog–Water Harvesting for All‐Day Building Energy Conservation

AbstractPassive radiative cooling, as a cooling technique with no energy input, can continuously radiate heat into the supercooled universe. However, the continuous cooling effect tends to cause the problem of nighttime overcooling. Moreover, non‐renewable radiative cooling materials and energy‐intensive processing methods lead to increased carbon emissions and resource consumption. Therefore, there is an urgent need to develop a renewable and environmentally friendly self‐adaption radiative cooling thermal management material. In this paper, a high‐performance self‐adaption thermal management wood composite aerogel material is designed and prepared by in situ growth of multi‐scale silicon dioxide on wood. The constructed passive radiative cooling material has a sub‐ambient cooling effect of up to 13.5 °C and 20.2 °C during daytime in winter and summer, respectively. Meanwhile, it has a certain thermal insulation performance (2.0 °C above ambient) due to low thermal conductivity (0.063370 ± 0.000329 W m−1 k−1) at night in winter. In addition, the material is also suitable for fog–water harvesting (fog–water harvesting rate of 59.27 ± 0.76 mg min−1) due to its hydrophobicity. This work can significantly promote the practical application of passive radiative cooling materials.

Preparation and Properties of Flexible Phenolic Silicone Hybrid Aerogels for Thermal Insulation

In order to prepare flexible thermal protection aerogel materials, using dimethyldimethoxysilane (DMDMS) and methyltrimethoxysilane (MTMS) as co-precursors, isocyanate-propyltrimethoxysilane (CFS-006) was added to the co-precursor as a coupling agent, and resorcinol and formaldehyde were added to the sol solution to prepare a phenolic silicone hybrid aerogel (FAS) by the sol–gel method. The prepared FAS aerogel had no phase separation problem, the density was only 0.118 g/cm3, the hydrophobic angle reached 155.3°, and it had certain flexibility. It could be compressed to 70% and still be restored to its original state. The FAS aerogel also had a low thermal conductivity of 0.0318 W/(m·K) and good high temperature insulation. The introduction of phenolic groups improved thermal stability; Tmax increased to 643.7 °C, and the residual carbon rate was 24.5%. This work has positive significance for the future combination of aerogels and textiles in the preparation of firefighting protective clothing.

Research and Application Progress of Aerogel Materials in the Field of Batteries and Supercapacitors

Aerogels, characterized by their exceptional porosity, vast specific surface areas, minimal density, and unparalleled thermal insulation capabilities, have become a focal point of attention in the energy sector over the past decade, particularly in the realms of batteries and supercapacitors. This comprehensive review delves into aerogels and their preparation methods, while reviewing their recent applications in batteries and supercapacitors. It delves deeply into the research and development progress, as well as the application advancements of aerogel materials in separators, electrolytes, and electrodes. Furthermore, this article highlights that the research on aerogels still faces some challenges, such as steep costs, sophisticated production steps, and relatively weak overall mechanical strength. Therefore, in the future, it is necessary to further strengthen the fundamental research and technological innovation of aerogel materials, and promote their industrialization process and wide application in the field of energy storage, particularly in the areas of batteries and supercapacitors.

Temperature-Dependent Thermal Conductivity Identification by Bayesian Inference

The identification of temperature-dependent thermal conductivity in aerogel material, which is commonly used as insulation in thermal protection structures of high-speed aircraft, faces the challenge of selecting the appropriate model in engineering practice. Considering the uncertainties in the selection process of an appropriate functional model, a novel Bayesian probability method computational framework based on response data is established to improve the accuracy of thermal conductivity identification. Three implementation steps are presented: 1) the database of candidate models is established; 2) the reconstructed signals can be calculated by a heat transfer analysis model; and 3) the posterior probability of each candidate model is estimated to obtain the optimal thermal conductivity model and determine the characteristic coefficients. Numerical simulations of a theoretical one-dimensional heat transfer model and a curved thermal protection structure are performed to verify the proposed method. Then, a heating experimental investigation of the curved thermal protection structure is conducted to identify the temperature-dependent thermal conductivity of aerogel material. The results indicate that the temperature-varying thermal conductivity can be accurately identified by the proposed method, which can be applied to the heat transfer analysis and design of aerogel materials in high-speed aircraft.

Efficient adsorption of flavonoids on amino-functionalized ZIF-8/chitosan aerogels

Covalent organic structures (MOFs), known for their exceptional properties in separation and purification, have garnered significant attention. However, applying MOF-based adsorbents in complex flavonoid separation scenarios remains challenging. In this study, we successfully synthesized adsorbent materials capable of efficiently adsorbing flavonoids using a vacuum freeze-drying method. The materials were derived from a cross-linked chitosan aerogel functionalized with amino-substituted zeolite imidazolium ester skeleton (ZIF-8). The ZIF-8-NH2, synthesized via in situ substitution of 2-aminobenzimidazole within the ZIF-8 framework, exhibits a smaller pore size than mono ligand ZIF-8. Due to its synergistic interaction with chitosan's biocompatibility and porous structure, the aerogel material (ZIF-8-NH2/CS) exhibited outstanding adsorption capacities (183.37 mg/g, 226.34 mg/g, and 187.16 mg/g) in standard solutions (T = 318 K, rpm = 200) of luteolin, quercetin, and rutin, along with high adsorption rates (71.3 ± 2.3 %, 72.4 ± 1.4 %, and 70.7 ± 3.5 %). And showed rapid adsorption in the first 60 min. After 5 cycles, the adsorption capacity of ZIF-8-NH2/CS aerogel remained at 80.5 % of the adsorption capacity of the initial cycle, and therefore, ZIF-8-NH2/CS aerogel has a good potential for reusability. Additionally, the adsorption process adhered to pseudo-first-order and pseudo-second-order kinetic models, alongside Langmuir and Freundlich isothermal adsorption models. This study introduces novel ideas and methods for the extraction and separation of flavonoids. Furthermore, the developed ZIF-8-NH2/CS aerogels with amino functionality hold promise for diverse applications in separating and purifying bioactive substances.

Research progress of aerogel used in lithium-ion power batteries

In recent years, with the rapid development of clean energy vehicles (i.e., electric vehicles and hybrid electric vehicles) and electrochemical energy storage stations, safety accidents have significantly increased. However, the abuse conditions such as overheating, overcharging, mechanical abuse, short circuits, etc., can result in thermal runaway of lithium-ion batteries (LIBs). Severe thermal runaway can lead to battery fire and even explosion, thereby threatening the safety of personnel. The application of a few aerogels to the thermal insulation layer between the cells of the lithium-ion battery modules can strengthen the safety of batteries. Among many aerogels, oxide aerogels show excellent insulation and high-temperature resistance. Therefore, aerogels, especially oxide aerogels, have aroused widespread research interest. This paper introduces the mechanism of thermal runaway of LIBs and systematically reviews several important oxide aerogels and the derived composites, especially those based on SiO2, Al2O3, and ZrO2 aerogels. The mechanical strength and high-temperature resistance of those aerogels are discussed. The application of aerogel in LIBs is also investigated in detail, and the all-around effect is caused by the introduction of aerogel materials. In addition, the thermal protection safety strategy of aerogel thermal insulation layers is proposed. It is supposed that this review could enable readers to deepen their understanding of this field.

“Partner” cellulose gel with “dialysis” function: Achieve the integration of filtration-enrichment-SERS detection

Hydrogel and aerogel materials have garnered significant attention in constructing effective surface-enhanced Raman spectroscopy (SERS) substrates due to their excellent adsorption capabilities, high specific surface area, and abundant chemical groups. However, in liquids with complex compositions, non-specific adsorption of macromolecules can lead to surface scaling and pore clogging of the substrate material, limiting the selective enrichment and SERS detection of target molecules. To address this, an innovative aerogel-chimeric hydrogel material (CH@S-CNF/SA/Ag NPs) was developed. The aerogel component, with its high specific surface area and electronegative properties, functions as a SERS “chip” for adsorption and detection of target molecules. Simultaneously, the mesoporous structure of the hydrogel “shell” effectively filters macromolecules from the solution. These CH@S-CNF/SA/Ag NPs were utilized as SERS substrate materials for detecting urine from healthy individuals and patients with chronic kidney disease stage 5 (CKD5). When combined with machine learning algorithms, the detection accuracy reached 99.50%. This work represents a significant advancement in the specific adsorption and SERS detection of small molecules in complex biological samples such as urine and blood.

Chitosan derived N-doped carbon aerogel nanostructures for high-performance supercapacitors

This study presented a chitosan-derived activated carbon aerogel material (ACAM), which was prepared via a sol–gel method, freeze-drying, and carbonization. The prepared nitrogen-doped carbon materials had nanopore structures with a highly specific surface area of 2341 m2 g−1 that was expected to be suitable as active electrode materials for supercapacitors). The prepared electrode exhibited a high capacitance of 215 F g−1 at 1.0 A g−1. Moreover, the electrode could retain almost 93% of the original capacitance, and the Coulombic efficiency remains over 97% after 5,000 cycles. The findings suggest a low-price and high-performance material for supercapacitors.

Photocatalytic activity of zinc oxide/hemimorphite/silica aerogel materials: performance and mechanism

Photocatalytic activity of zinc oxide/hemimorphite/silica aerogel materials: performance and mechanism

Supercritical carbon dioxide–activated copper/bacterial cellulose aerogels for the capture of hydrophobic organic liquids

In this study, bacterial cellulose was derived from coconut water via fermentative production of nata de coco, a common food in Southeast Asia. Bacterial cellulose offers distinct advantages over plant cellulose resources, including three-dimensional structure, high porosity, high cellulose purity, and the absence of required polluting treatments, making it an ideal candidate for the facile preparation of various functional aerogel materials. Surface modification of nata de coco-derived cellulose fibers was obtained by incorporating Cu species (approximately 15 wt%) through an aqueous reaction of Cu(CH3COO)2 with N2H4 at room temperature. The Cu-coated bacterial cellulose aerogels were fabricated via supercritical carbon dioxide drying to maintain the natural three-dimensional matrix and subsequently characterized by various techniques confirming high porosity and crystallinity and successful Cu coating onto the cellulose fiber surface. The Cu-containing aerogel showed a significantly improved adsorption uptake for n-hexane (12.6 g g−1) in comparison with pure bacterial cellulose–based aerogel (3.2 g g−1). Furthermore, notable adsorption performances of 13.6–19.9 g g−1 were found for cyclohexane, ethyl acetate, and soybean oil, indicating the high efficiency of the supercritical carbon dioxide–activated bacterial cellulose aerogel containing Cu species in the adsorption of water-insoluble liquids. Notably, applying supercritical carbon dioxide drying afforded the stable aerogel structure for reusing over several cycles with almost unchanged trapping capacity.

Lightweight and thermally insulating ZnO/SiCnw aerogel: A promising high temperature electromagnetic wave absorbing material with oxidation resistance

Enhancing the microwave attenuation performance under high-temperature and oxidative conditions is a forefront issue for electromagnetic absorption materials. SiC nanowire material exhibits great potential due to its superior thermal stability and oxidation resistance. While, the relatively poor dielectric loss limits its further application as a high effective absorber. In this study, the strategy of laminated porous structure design, as well as the composition of ZnO nanocrystals were applied to promote the microwave attenuation capacity. A simple dual hydrolysis reaction method was employed to grow ZnO nanocrystals on SiC nanowires, followed by the preparation of a 3D layered structure of ZnO/SiCnw aerogel material using directional solidification processes. The ZnO/SiCnw aerogel demonstrated effective broadband attenuation (>90 %) across the entire X-band from room temperature to 873 K. Moreover, the material chemistry remained constant at temperatures as high as 1073 K in air. It exhibited ultralightweight properties and possessed a low thermal conductivity of approximately 0.056 W/m·K, with a density of 0.167 g/cm3. The combination of its lightweight, oxidation resistance, thermal insulation, and attractive X-band absorption efficiency positions ZnO/SiCnw aerogel as a promising EM absorption candidate at both room and high temperatures.

Wood Sponge for Oil-Water Separation.

In addition to filtering some sediments, hydrophobic wood sponges can also absorb many organic solvents, particularly crude oil. The leakage of crude oil poses a serious threat to the marine ecosystem, and oil mixed with water also generates great danger for its use. From the perspective of low cost and high performance, wood sponges exhibit great potential for dealing with crude oil pollution. Wood sponge is a renewable material. With a highly oriented layered structure and a highly compressible three-dimensional porous frame, wood sponges are extremely hydrophobic, making them ideal for oil-water separation. Currently, the most common approach for creating wood sponge is to first destroy the wood cell wall to obtain a porous-oriented layered structure and then enhance the oil-water separation ability via superhydrophobic treatment. Wood sponge prepared using various experimental methods and different natural woods exhibits distinctive properties in regards to robustness, compressibility, fatigue resistance, and oil absorption ability. As an aerogel material, wood sponge offers multi-action (absorption, filtration) and reusable oil-water separation functions. This paper introduces the advantages of the use of wood sponge for oil-water separation. The physical and chemical properties of wood sponge and its mechanism of adsorbing crude oil are explained. The synthesis method and the properties are discussed. Finally, the use of wood sponge is summarized and prospected.

Enhanced mechanical property and flame resistance of phosphorylated cellulose nanofiber based‐aerogel combined with boric acid

AbstractAs for cellulose‐based aerogels, a feature of inadequate mechanics and easy‐flammability seriously restricts their practical applications. To address this issue, herein a lightweight, mechanical elastic and flame‐retardant phosphorylated lignin‐based cellulose nanofiber (PLCNF‐B) aerogel with the aid of boric acid was successfully obtained by freeze‐drying method. Due to the uniform and tough network structure benefitting by strong hydrogen bond between phosphorylated fibers and boric acid, the resultant aerogel showed excellent mechanical performance, that is, high compressive strength of 8.9 kPa (strain: 50%) and outstanding cyclic reliability (remain 90% after 10 cycles). Meanwhile, PLCNF‐B aerogel possesses highly improved flame‐retardant property, that is, a high LOI value (up to 46%), significantly reduced peak heat release rate (11.2 W/g) and total heat release rate (0.47 kJ/g). Based on structural observation and analysis, the flame‐retardant behavior should be attributed to the formation of PxOy/amorphous boron oxide protective layer, which is derived from the phosphorus containing group of PLCNF and boric acid. The splendid overall performance of aerogel material offers a potential material tactic for design and development of advanced bio‐based aerogels for practical applications.

Hydrogels and Aerogels for Versatile Photo-/Electro-Chemical and Energy-Related Applications.

The development of photo-/electro-chemical and flexible electronics has stimulated research in catalysis, informatics, biomedicine, energy conversion, and storage applications. Gels (e.g., aerogel, hydrogel) comprise a range of polymers with three-dimensional (3D) network structures, where hydrophilic polyacrylamide, polyvinyl alcohol, copolymers, and hydroxides are the most widely studied for hydrogels, whereas 3D graphene, carbon, organic, and inorganic networks are widely studied for aerogels. Encapsulation of functional species with hydrogel building blocks can modify the optoelectronic, physicochemical, and mechanical properties. In addition, aerogels are a set of nanoporous or microporous 3D networks that bridge the macro- and nano-world. Different architectures modulate properties and have been adopted as a backbone substrate, enriching active sites and surface areas for photo-/electro-chemical energy conversion and storage applications. Fabrication via sol-gel processes, module assembly, and template routes have responded to professionalized features and enhanced performance. This review presents the most studied hydrogel materials, the classification of aerogel materials, and their applications in flexible sensors, batteries, supercapacitors, catalysis, biomedical, thermal insulation, etc.

Lightweight, compressible, elastic resorcinol-formaldehyde aerogels with cobalt-ligand-enhanced cross-linked skeletons

Resorcinol-formaldehyde (RF) aerogel materials exhibit remarkable properties such as low density, ablation resistance (high residual carbon rate), easily regulated pore structure and low thermal conductivity, making them promising for applications in adsorption, medicine and aerospace, among others. However, since their inception, RF aerogels have suffered from disadvantages such as brittleness and long preparation cycles, which have severely limited their widespread use. In order to improve the mechanical properties of RF aerogels, this paper presents a new synthetic route for obtaining strong elastic properties without introducing additional fiber reinforcement. Here, a lightweight, compressible, elastic resorcinol-formaldehyde aerogel with cobalt-ligand-enhanced cross-linked skeletons was prepared by sol-gel and freeze-drying methods using an alkali metal salt (cobalt (II) acetate) as a cross-linking agent and sodium acetate as a catalyst. The coordination of metal ions (Co2+) with resorcinol resulted in the formation of a structure analogous to a metal-phenolic network (MPN), which altered the crosslinking mode and degree of crosslinking of the RF aerogel. This process led to the thickening of the skeletal structure of the sample. Concurrently, a multilayered pore structure was generated within the interior under the appropriate pH conditions, which contributed to the strengthening of the skeleton of the samples and a reduction in thermal conductivity. The obtained RF-Co aerogel can withstand 68.6 % compression change without fracture and shows good elastic deformation at 35 % compression rate, while the aerogel exhibits low thermal conductivity (0.039 W (m K)−1) and low density (0.09 g cm−3).