Advantage Of Finite Element Analysis Research Articles

Design, Analysis and Experimental Verification of a Coreless Permanent Magnet Synchronous Motor

The paper presents a new cost-effective magnetic circuit structure of a coreless permanent magnet synchronous motor (PMSM) with 16 poles and 12 coils for a mass production fan drive unit. 2D and 3D numerical models of the coreless PMSM were developed. Optimisation calculations were carried out using the field model of the machine. Multistage calculations were performed using the professional FEM package, ANSYS Maxwell and the author’s proprietary finite element method (FEM) code. On the basis of the conducted tests and analysis of the obtained results, the “optimal” magnetic circuit structure of the PMSM motor was selected. The prototype motor was subjected to measurement to verify the developed models and the proposed design approach that takes advantage of finite element analysis (FEA).

Nonlinear Numerical and Analytical Assessment of the Shear Strength of RC and SFRC Beams Externally Strengthened with CFRP Sheets

This study investigates numerically utilizing nonlinear finite element (ANSYS software) and analytically the shear response of the Reinforced Concrete (RC) beams. Different beams are considered in the current study, such as RC, steel fibre reinforced concrete (SFRC) without web reinforcement, and RC externally reinforced in the shear zone with carbon fibre reinforced polymer (CFRP) sheets. Nonlinear finite element model (FEM) is designed to simulate the performance of the designed beams. The results of FEM are compared to experimental measurements and standard design codes (ACI 440.2R-17, FIB 14, CNR-DT200, and ACI 318-19). According to the experimental approach and nonlinear finite element, the enhancement in the load carrying capacity of SFRC beam due to CFRP strengthening decreases with a volume fraction of steel fibres of 2%. However, the effect of CFRP strengthening on the shear behaviour of RC beams was observed in increased load carrying and ultimate deflection capacities as a result of the CFRP strengthening. The results show that CFRP has a significant contribution to shear strength. At each load increment, the created model accurately reproduced the initial and progressive crack patterns. A comparison of nonlinear finite element and analytical models was conducted using the codes ACI 440.2R-17, FIB 14, CNR-DT200, and ACI 318-19. Numerically, the FEM results showed a high agreement with ACI 440.2R-17 standard code, with correlation approach to 99%. The comparison experimental load capacity of beams to FEM and ACI 440.2R-17 shows that the FEM can be significantly used to estimate the shear strength of beams in the X-Y directions with simulating different scenarios of CFRP and SFRC characteristics. The discrepancy between the nonlinear FEA and the theoretical predictions from the ACI 440.2R-17 code is less than 1%, from the FIB14 code is less than 2%, from the CNR-DT200 code is less than 15%, and from the ACI 318-19 code is less than 30%. The ultimate load capacity evaluated based on ACI 440.2R-17 code provision shows a good agreement with the experimental data as compared to the others’ code provision. The results of the finite element analysis and analytical models were in good agreement with the experimental results. The most significant advantage of finite element analysis over experimental approaches was that it can aid in the investigation of different output results that cannot be measured experimentally, such as shear stress in the XY direction throughout the beam strengthened in shear with different CFRP properties and steel fibre reinforced concrete (SFRC).

FE Analysis Of Runner Blade For Small Bulb Turbine

The stress analysis of the rotor blade being the key phase of the turbomachine design requires much attention and careful determination of the blade loading to get realistic results. So due to the advantages of finite element analysis in the field of mechanical engineering it is widely used as simulation. The runner blades of the turbine are very critical part because its transfer fluid energy to convert the rotary or mechanical energy. The turbine runner blades are subjected to different load e.g. fluid or gas forces, inertia load, centrifugal forces. The primary reason of break down in turbine is the failure of blade. So, the proper blade design is require. The finite element analysis of bulb turbine is using software Creo. Initial studies focused on the modeling, meshing and physics definition of the problem. The results were analyzed for rotor and found location of several critical sections subjected to high stress concentration causing failure of rotor blade. Also found the effect of rotor speed on stress and displacement. Hence, the proper mechanical design of the turbo machine blade plays a vital role in the proper functioning of the turbo machine.

Designing and prototyping for production. Practical applications of electromagnetic modelling

Electromagnetic modelling using numerical methods such as finite element analysis (FEA) is well established for solving problems beyond the scope of analytical methods. This paper focuses on two case studies showing the advantages of FEA in speeding up the design process and improving the final design of electromagnetic devices.