Advanced Telescope For High ENergy Astrophysics Research Articles

The Cryogenic Anticoincidence Detector for the NewAthena X-IFU Instrument: A Program Overview

Athena (advanced telescope for high-energy astrophysics) is an ESA large-class mission, at present under a re-definition “design-to-cost” phase, planned for a prospective launch at L1 orbit in the second half of the 2030s. It will be an observatory alternatively focusing on two complementary instruments: the X-IFU (X-ray Integral Field Unit), a TES (TransitionEdge Sensor)-based kilo-pixel array which is able to perform simultaneous high-grade energy spectroscopy (~3 eV@7 keV) and imaging over 4′ FoV (field of view), and the WFI (Wide Field Imager), which has good energy spectral resolution (~170 eV@7 keV) and imaging on wide 40′ × 40′ FoV. Athena will be a truly transformational observatory, operating in conjunction with other large observatories across the electromagnetic spectrum available in the 2030s like ALMA, ELT, JWST, SKA, CTA, etc., and in multi-messenger synergies with facilities like LIGO A+, Advanced Virgo+, LISA, IceCube and KM3NeT. The Italian team is involved in both instruments. It has the co-PIship of the cryogenic instrument for which it has to deliver the TES-based Cryogenic AntiCoincidence detector (CryoAC) necessary to guarantee the X-IFU sensitivity, degraded by a primary particle background of both solar and galactic cosmic ray (GCR) origins, and by secondary electrons produced by primaries interacting with the materials surrounding the main detector. The outcome of Geant4 studies shows the necessity for adopting both active and passive techniques to guarantee the residual particle background at 5 × 10−3 cts cm−2 s−1 keV−1 level in 2–10 keV scientific bandwidth. The CryoAC is a four-pixel detector made of Si-suspended absorbers sensed by Ir/Au TESes placed at <1 mm below the main detector. After a brief overview of the Athena mission, we will report on the particle background reduction techniques highlighting the impact of the Geant4 simulation on the X-IFU focal plane assembly design, then hold a broader discussion on the CryoAC program in terms of detection chain system requirements, test, design concept against trade-off studies and programmatic.

Broadside-Coupled Niobium Flexible Cables

We have developed fine-pitch, multilayer, superconducting wiring for routing around a ninety-degree corner terminated with wirebonding interfaces. The component-level testbed for the Advanced Telescope for High Energy Astrophysics (ATHENA) X-Ray Integral Field Unit (X-IFU) focal plane requires compact, high-density, low-crosstalk wiring fanout to connect the detectors in the focal plane array with NIST-fabricated SQUID time domain multiplexing (TDM) readout chips. The full assembly baselines two interface chips: a flexible interface chip bending around the corner and a planar silicon carrier chip. The TDM readout is indium bump-bonded to the silicon carrier and afterward the flexible chip is clipped in place and wirebonded to the detector and fanout wiring on the carrier. This assembly is repeated for each side of the hexagonal focal plane structure. As conventional commercial cables are not able to achieve the fine-pitch, low-crosstalk, superconducting wiring required, we fabricate these flexible interface chips in-house via lithographic patterning and etching of sputter deposited thin films to create broadside-coupled superconducting niobium microstrips. Within the chip, the wiring on the flexible polyimide region transitions to silicon substrate for the closely spaced wirebond pads. The Nb microstrip wiring climbing a thick polyimide sidewall presents a fabrication challenge which we shall discuss in this paper. We describe the function of these components to build an effective engineering testbed for the ATHENA X-IFU.

First light of BEaTriX, the new testing facility for the modular X-ray optics of the ATHENA mission

Aims. The Beam Expander Testing X-ray facility (BEaTriX) is a unique X-ray apparatus now operated at the Istituto Nazionale di Astrofisica (INAF), Osservatorio Astronomico di Brera (OAB), in Merate, Italy. It has been specifically designed to measure the point spread function (PSF) and the effective area (EA) of the X-ray mirror modules (MMs) of the Advanced Telescope for High-ENergy Astrophysics (ATHENA), based on silicon pore optics (SPO) technology, for verification before integration into the mirror assembly. To this end, BEaTriX generates a broad, uniform, monochromatic, and collimated X-ray beam at 4.51 keV. The beam collimation is better than a few arcseconds, ensuring reliable tests of the ATHENA MMs, in their focus at a 12 m distance. Methods. In BEaTriX, a micro-focus X-ray source with a titanium anode is placed in the focus of a paraboloidal mirror, which generates a parallel beam. A crystal monochromator selects the 4.51 keV line, which is expanded to the final size by a crystal asymmetrically cut with respect to the crystalline planes. An in-house-built Hartmann plate was used to characterize the X-ray beam divergence, observing the deviation of X-ray beams from the nominal positions, on a 12-m-distant CCD camera. After characterization, the BEaTriX beam has the nominal dimensions of 170 mm × 60 mm, with a vertical divergence of 1.65 arcsec and a horizontal divergence varying between 2.7 and 3.45 arcsec, depending on the monochromator setting: either high collimation or high intensity. The flux per area unit varies from 10 to 50 photons s−1 cm−2 from one configuration to the other. Results. The BEaTriX beam performance was tested using an SPO MM, whose entrance pupil was fully illuminated by the expanded beam, and its focus was directly imaged onto the camera. The first light test returned a PSF and an EA in full agreement with expectations. As of today, the 4.51 keV beamline of BEaTriX is operational and can characterize modular X-ray optics, measuring their PSF and EA with a typical exposure of 30 min. Another beamline at 1.49 keV is under development and will be integrated into the current equipment. We expect BEaTriX to be a crucial facility for the functional test of modular X-ray optics, such as the SPO MMs for ATHENA.

Enhanced simulations on the Athena/Wide Field Imager instrumental background

The Wide Field Imager (WFI) is one of two focal plane instruments of the Advanced Telescope for High-Energy Astrophysics (Athena), ESA’s next large x-ray observatory, planned for launch in the early 2030s. The current baseline halo orbit is around L2, and the second Lagrangian point of the Sun-Earth system L1 is under consideration. For both potential halo orbits, the radiation environment, solar and cosmic protons, electrons, and He-ions will affect the performance of the instruments. A further critical contribution to the instrument background arises from the unfocused cosmic hard x-ray background. It is important to understand and estimate the expected instrumental background and to investigate measures, such as design modifications or analysis methods, which could improve the expected background level to achieve the challenging scientific requirement (<5 × 10 − 3 counts / cm2 / keV / s at 2 to 7 keV). Previous WFI background simulations done in Geant4 have been improved by taking into account new information about the proton flux at L2. In addition, the simulation model of the WFI instrument and its surroundings employed in Geant4 simulations has been refined to follow the technological development of the WFI camera.

Analysis of the Unconcentrated Background of the EPIC pn Camera on Board XMM-Newton

Abstract Our understanding of the background of the EPIC/pn camera on board XMM-Newton is incomplete. This affects the study of extended sources and can influence the predictions of the expected background of future X-ray missions, such as the Advanced Telescope for High Energy Astrophysics (ATHENA). Here we provide new results based on the analysis of the largest data set ever used. We focus on the unconcentrated component of the EPIC/pn background, supposedly related to cosmic rays interacting with detector and telescope structures. We show that the so-called out field-of-view region of the pn detector is actually exposed to the sky. After carefully cleaning from the sky contamination, the unconcentrated background measured in the out field-of-view region does not show significant spatial variations, and its time behavior is anticorrelated with the solar cycle. We find a very tight linear correlation between unconcentrated backgrounds detected in the EPIC/pn and EPIC/MOS2 cameras. This relationship permits the correct evaluation of the pn unconcentrated background of each exposure on the basis of MOS2 data, avoiding the use of the contaminated out field-of-view region of the pn, as done in standard techniques. We find a tight linear correlation between the pn unconcentrated background and the proton flux in the 630–970 MeV energy band, as measured by the EPHIN instrument on board SOHO. Through this relationship, we quantify the contribution of cosmic-ray interaction to the pn unconcentrated background. This reveals a second source that contributes to the pn unconcentrated background for a significant fraction (30%–70%). This agent does not depend on the solar cycle or vary with time and is roughly isotropic. After having ruled out several candidates, we find that the hard X-ray photons of the cosmic X-ray background satisfy all known properties of the constant component. Our findings provide an important observational confirmation of simulation results on ATHENA and suggest that a high-energy particle monitor could contribute decisively to the reproducibility of the background for both experiments on ATHENA.

High-redshift galaxy groups as seen by ATHENA/WFI

Context. The first massive galaxy groups in the Universe are predicted to have formed at redshifts well beyond two. Baryonic physics, like stellar and active galactic nuclei (AGN) feedback in this very active epoch, are expected to have left a strong imprint on the thermo-dynamic properties of these early galaxy groups. Therefore, observations of these groups are key to constrain the relative importance of these physical processes. However, current instruments are not sensitive enough to detect them easily and characterize their hot gas content. Aims. In this work, we quantify the observing power of the Advanced Telescope for High ENergy Astrophysics (ATHENA), the future large X-ray observatory of the European Space Agency, for discovering and characterizing early galaxy groups at high redshifts. We also investigate how well ATHENA will constrain different feedback mechanisms. Methods. We used the SImulation of X-ray TElescopes simulator to mimic ATHENA observations, and a custom-made wavelet-based algorithm to detect galaxy groups and clusters in the redshift range 0.5 ≤ z ≤ 4. We performed extensive X-ray spectral fitting in order to characterize their gas temperature and X-ray luminosity. In the simulations and their analysis, we took into account the main ATHENA instrumental features: background, vignetting, and point spread function degradation with off-axis angle, as well as all X-ray foreground and background components including a realistic AGN flux distribution. Different physically motivated thermo-dynamical states of galaxy groups were simulated and tested, including central AGN contamination, different scaling relation models (luminosity evolution), and distinct surface brightness profiles. Also, different ATHENA instrumental setups were tested, including both 15 and 19 mirror rows and the applied optical blocking filter. Results. In the deep Wide Field Imager survey expected to be carried out during part of ATHENA’s first four years (the nominal mission lifetime) more than 10 000 galaxy groups and clusters at z ≥ 0.5 will be discovered. We find that ATHENA can detect ∼20 high-redshift galaxy groups with masses of M500 ≥ 5 × 1013 M⊙ and z ≥ 2, and almost half of them will have a gas temperature determined to a precision of ΔT/T ≤ 25%. Conclusions. We demonstrate that high-redshift galaxy groups can be detected very efficiently as extended sources by ATHENA and that a key parameter determining the total number of such newly discovered sources is the area on the sky surveyed by ATHENA. We show that these observations have a very good potential to constrain the importance of different feedback processes in the early universe because of ATHENA’s ability not only to find the early groups but also to characterize their hot gas properties at the same time.

Synchrotron x-ray transmission measurements and modeling of filters investigated for Athena

Advanced Telescope for High-Energy Astrophysics is a large-class astrophysics space mission selected by the European Space Agency to study the theme “Hot and Energetic Universe.” The mission essentially consists of a large effective area x-ray telescope and two detectors: the X-ray Integral Field Unit (X-IFU) and the Wide Field Imager (WFI). Both instruments require filters to shield from out-of-band radiation while providing high transparency to x-rays. The mission is presently in phase B; thus, to consolidate the preliminary design, investigated filter materials need to be properly characterized by experimental test campaigns. We report results from high-resolution x-ray transmission measurements performed using different synchrotron radiation beamlines to assess the filter calibration accuracy and mitigate the risk related to selecting a unique calibration facility. The main goals of these test campaigns are (i) to verify the compliance of the investigated filter design to the scientific requirements, (ii) to develop an accurate x-ray transmission model, and (iii) to start identifying suitable measurement facilities and achievable accuracy for the flight filters calibration program. In particular, the x-ray transmission model of the X-IFU and WFI filters has been refined within the edges of Al, C, N, and O by deriving the optical constants from two reference samples measured by synchrotron light. The achievable filter calibration accuracy has been estimated by evaluating the agreement between the best-fit according to the developed transmission model and the experimental data.

Novel local shielding approach for the laser welding based additive manufacturing of large structural space components from titanium

The Advanced Telescope for High-ENergy Astrophysics (ATHENA) will observe “the hot and energetic universe,” which was determined as one of the most urgent scientific topics for a major future space mission by The European Space Agency (ESA). One of its three main components is the optical bench, a monolithic titanium structure that accommodates 678 mirror modules and keeps them accurately aligned. The immense but slender structure in the range of 2.5–3 m diameter at a height of 300 mm proves a challenge to manufacturing. A hybrid robot cell is developed using additive buildup via laser welding, combined with high-performance machining and the state of the art process and metrology monitoring and control. The present work focuses on the shielding of the laser induced melt pool, a key concern when processing titanium. The sensitive metal with unusual low heat conductivity requires a large area of high purity atmosphere to prevent embrittlement. However, the large hybrid system prohibits the use of a sealed enclosure, and therefore, a local shielding system is developed for the challenging case of the ATHENA optical bench’s hollow-chamber design. Since the present thin wall design poses a worst-case scenario in terms of heat dissipation and shielding flow for the shielding system, its effectiveness here can be applied to most other geometries enabling the flexibility for lot size one. The key features of the novel approach are the prevention of turbulence while keeping operation economical despite the large shielding area. The first is achieved by means of an integrated honeycomb screen and the latter by employing a layered flow with a higher velocity outer curtain and an air deflecting coflow. This system was numerically optimized, tested, and effectiveness proven by means of visual inspection, microstructural analysis, and measurement of material properties.

Observational limits on the X-ray emission from the bubble nebula surrounding Ho IX X-1

ABSTRACT Optical and radio observations of shock-ionized bubble nebulae surrounding ultraluminous X-ray sources (ULXs) suggest that they are powered by jets or supercritical outflows presumably launched from the ULX accretion disc. Recent simulations of these systems have shown that the shocked wind can emit thermal X-rays with estimated luminosities ≲1036 erg s−1. In this work, we investigated whether it is possible to detect and spatially resolve the X-ray emission from these systems using archival Chandra observations of the ULX Holmberg IX X-1 (Ho IX X-1). This source is an ideal target to study for two reasons: it is surrounded by an optical bubble nebula with a large spatial extent (∼400 pc) that can easily be resolved with Chandra. Further, it has a hard X-ray continuum that is easily distinguishable from the expected soft thermal emission from the nebula. However, a spectral and photometric analysis on stacked Chandra observations of the source reveals that there is no strong evidence for an X-ray bubble associated with it, to a limiting luminosity of ∼2 × 1036 erg s−1. The detection of such X-ray nebulae may be possible with future X-ray missions such as Advanced Telescope for High ENergy Astrophysics(ATHENA), which would provide useful constraints on the kinematics of the outflow. Finally, our observations also emphasize that the nebular emission does not contribute significantly to the residuals in the X-ray spectrum of the source, which are more likely to be linked to processes localized to the ULX.

Constraining the geometry of the nuclear wind in PDS 456 using a novel emission model

Context. Outflows from active galactic nuclei (AGN) are often invoked to explain the co-evolution of AGN and their host galaxies, and the scaling relations between the central black hole mass and the bulge velocity dispersion. Nuclear winds are often seen in the X-ray spectra through Fe K shell transitions and some of them are called ultra fast outflows (UFOs) due to their high velocities, up to some fractions of the speed of light. If they were able to transfer some percentage of the AGN luminosity to the host galaxy, this might be enough to trigger an efficient feedback mechanism. Aims. We aim to establish new constraints on the covering fraction and on the kinematic properties of the UFO in the powerful (Lbol ∼ 1047 erg s−1) quasar PDS 456, an established Rosetta stone for studying AGN feedback from disk winds. This will allow us to estimate the mass outflow rate and the energy transfer rate of the wind, which are key quantities to understand the potential impact on the host galaxy. Methods. We analyze two sets of simultaneous XMM-Newton and NuSTAR observations taken in September 2013 and reported in Nardini et al. (2015, Science, 347, 860) as having similar broadband spectral properties. We fit the Fe K features with a P-Cygni profile between 5 and 14 keV, using a novel Monte Carlo model for the WINd Emission (WINE). Results. We find an outflow velocity ranging from 0.17 to 0.28 c, with a mean value of 0.23 c. We obtain an opening angle of the wind of 71−8+13 deg and a covering fraction of 0.7−0.3+0.2, suggesting a wide-angle outflow. We check the reliability of the WINE model by performing extensive simulations of joint XMM-Newton and NuSTAR observations. Furthermore, we test the accuracy of the WINE model in recovering the geometrical properties of UFOs by simulating observations with the forthcoming Advanced Telescope for High-Energy Astrophysics (ATHENA) in the X-ray band.

Relating Kerr SMBHs in active galactic nuclei to RADs configurations

There is strong observational evidence that many active galactic nuclei (AGNs) harbour super-massive black holes (SMBHs), demonstrating multi-accretion episodes during their life-time. In such AGNs, corotating and counterrotating tori, or strongly misaligned disks, as related to the central Kerr SMBH spin, can report traces of the AGNs evolution. Here we concentrate on aggregates of accretion disks structures, ringed accretion disks (RADs) orbiting a central Kerr SMBH, assuming that each torus of the RADs is centered in the equatorial plane of the attractor, tori are coplanar and axi-symmetric. Many of the RAD aspects are governed mostly by the spin of the Kerr geometry. We classify Kerr black holes (BHs) due to their dimensionless spin, according to possible combinations of corotating and counterrotating equilibrium or unstable (accreting) tori composing the RADs. The number of accreting tori in RADs cannot exceed n = 2. We present list of 14 characteristic values of the Kerr BH dimensionless spin a governing the classification in whole the black hole range , uniquely constrained by the RAD properties. The spin values are remarkably close providing an accurate characterization of the Kerr attractors based on the RAD properties. RAD dynamics is richer in the spacetimes of high spin values. One of the critical predictions states that a RAD tori couple formed by an outer accreting corotating and an inner accreting counterrotating torus is expected to be observed only around slowly spinning (a < 0.46M) BHs. The analysis strongly binds the fluid and BH characteristics providing indications on the situations where to search for RADs observational evidences. Obscuring and screening tori, possibly evident as traces in x-ray spectrum emission, are strongly constrained, eventually ruling out many assumptions used in the current investigations of the screening effects. We expect relevance of our classification of Kerr spacetimes in relation to astrophysical phenomena arising in different stages of AGNs life that could be observed by the planned x-ray satellite observatory ATHENA (Advanced Telescope for High ENergy Astrophysics).

Estimating the equation of state from measurements of neutron star radii with 5% accuracy

Context. Observations of heavy (⋍2 M⊙) neutron stars, such as PSR J1614−2230 and PSR J0348+0432, in addition to the recent measurement of tidal deformability from the binary neutron-star merger GW170817, place interesting constraints on theories of dense matter. Currently operating and future observatories, such as the Neutron star Interior Composition Explorer (NICER) and the Advanced Telescope for High ENergy Astrophysics (ATHENA), are expected to collect information on the global parameters of neutron stars, namely masses and radii, with an accuracy of a few percent. Such accuracy will allow for precise comparisons of measurements to models of compact objects and significantly improve our understanding of the physics of dense matter. Aims. The dense-matter equation of state is still largely unknown. We investigate how the accuracy of measurements expected from the NICER and ATHENA missions will improve our understanding of the dense-matter interior of neutron stars. Methods. We compared global parameters of stellar configurations obtained using three different equations of state: a reference (SLy4 EOS) and two piecewise polytropes manufactured to produce mass-radius relations indistinguishable from an observational point of view, i.e. within the predicted error of radius measurement. We assumed observational errors on the radius determination corresponding to the accuracies expected for the NICER and ATHENA missions. The effect of rotation was examined using high-precision numerical relativity computations. Because masses and rotational frequencies might be determined very precisely in the most optimistic scenario, only the influence of observational errors on radius measurements was investigated. Results. We show that ±5% errors in radius measurement lead to ~10% and ~40% accuracy in central parameter estimations for low-mass and high-mass neutron stars, respectively. Global parameters, such as oblateness and surface area, can be established with 8–10% accuracy, even if only compactness (instead of mass and radius) is measured. We also report on the range of tidal deformabilities corresponding to the estimated masses of GW170817 for the assumed uncertainty in radius.

Fabrication of Flexible Superconducting Wiring with High Current-Carrying Capacity Indium Interconnects.

The X-ray integral field unit (X-IFU) is a cryogenic spectrometer for the Advanced Telescope for High ENergy Astrophysics (ATHENA). ATHENA is a planned next-generation space-based X-ray observatory with capabilities that surpass the spectral resolution of prior missions. Proposed device designs contain up to 3840 transition edge sensors, each acting as an individual pixel on the detector, presenting a unique challenge for wiring superconducting leads in the focal plane assembly. In prototypes that require direct wiring, the edges of X-IFU focal plane have hosted aluminum wirebonding pads; however, indium (In) 'bumps' deposited on an interface layer such as molybdenum nitride (MoN) can instead be used as an array of superconducting interconnects. We investigated bumped MoN:In structures with different process cleans and layer thicknesses. Measurements of the resistive transitions showed variation of transition temperature T c as a function of bias and generally differed from the expected bulk T c of In (3.41 K). Observed resistance of the In bump structures at temperatures below the MoN transition (at 8.0 K) also depended on the varied parameters. For our proposed X-IFU geometry (10 μm of In mated to a 1-μm In bump), we measured a minimum T c of 3.14 K at a bias current of 3 mA and a normal resistance of 0.59 mΩ per interconnect. We also investigated the design and fabrication of superconducting niobium (Nb) microstrip atop flexible polyimide. We present a process for integrating In bumps with the flexible Nb leads to enable high-density wiring for the ATHENA X-IFU focal plane.

Study of a Superconducting Magnetic Diverter for the ATHENA X-Ray Space Telescope

The advanced telescope for high energy astrophysics (ATHENA) is an X-ray telescope of the European space agency which is planned to be launched in 2028. It will carry out observations in the X-ray band, exploiting two focal plane detectors where X-ray photons will be focused by silicon pore optics. Previous X-ray missions have shown a serious issue with soft protons and ions (below 150 keV/n), which could enter the telescope mirror aperture and be concentrated toward the focal plane. These particles must be blocked or diverted to avoid excess background loading on the detectors. The proposed solution is to deflect protons away from the instruments field of view by means of magnets located between the optics and the focal plane. A 160000 amp-turns HTS superconducting toroidal magnet, composed by three or four round coils located between 0.6 and 1.2 m from the focal plane, can efficiently deflect most of the incoming particles. The rejection rate for protons till 120 keV is better than 99%, to be compared with about 80% of a previously proposed diverter based on permanent magnets. The magnetic field requirement at the detectors level (B <; 1 mT) is widely satisfied, as well as the mass budget of 110 kg. Challenging aspects related to the operation and reliability of the superconducting magnet will be discussed.

The Athena X-ray Integral Field Unit (X-IFU)

The X-ray Integral Field Unit (X-IFU) of the Advanced Telescope for High-ENergy Astrophysics (Athena) large-scale mission of ESA will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV (FWHM) up to 7 keV. The core scientific objectives of Athena drive the main performance parameters of the X-IFU. We present the current reference configuration of the X-IFU, and the key issues driving the design of the instrument.

Mitigation strategies against radiation-induced background for space astronomy missions

The Advanced Telescope for High ENergy Astrophysics (ATHENA) mission is a major upcoming space-based X-ray observatory due to be launched in 2028 by ESA, with the purpose of mapping the early universe and observing black holes. Background radiation is expected to constitute a large fraction of the total system noise in the Wide Field Imager (WFI) instrument on ATHENA, and designing an effective system to reduce the background radiation impacting the WFI will be crucial for maximising its sensitivity. Significant background sources are expected to include high energy protons, X-ray fluorescence lines, 'knock-on' electrons and Compton electrons. Due to the variety of the different background sources, multiple shielding methods may be required to achieve maximum sensitivity in the WFI. These techniques may also be of great interest for use in future space-based X-ray experiments. Simulations have been developed to model the effect of a graded-Z shield on the X-ray fluorescence background. In addition the effect of a 90nm optical blocking filter on the secondary electron background has been investigated and shown to modify the requirements of any secondary electron shielding that is to be used.

Alignment error of mirror modules of advanced telescope for high-energy astrophysics due to wavefront aberrations

One of the approaches that is being tested for the integration of the mirror modules of the advanced telescope for high-energy astrophysics x-ray mission of the European Space Agency consists in aligning each module on an optical bench operated at an ultraviolet wavelength. The mirror module is illuminated by a plane wave and, in order to overcome diffraction effects, the centroid of the image produced by the module is used as a reference to assess the accuracy of the optical alignment of the mirror module itself. Among other sources of uncertainty, the wave-front error of the plane wave also introduces an error in the position of the centroid, thus affecting the quality of the mirror module alignment. The power spectral density of the position of the point spread function centroid is here derived from the power spectral density of the wave-front error of the plane wave in the framework of the scalar theory of Fourier diffraction. This allows the defining of a specification on the collimator quality used for generating the plane wave starting from the contribution to the error budget allocated for the uncertainty of the centroid position. The theory generally applies whenever Fourier diffraction is a valid approximation, in which case the obtained result is identical to that derived by geometrical optics considerations.

Development of the superconducting detectors and read-out for the X-IFU instrument on board of the X-ray observatory Athena

The Advanced Telescope for High-Energy Astrophysics (Athena) has been selected by ESA as its second large-class mission. The future European X-ray observatory will study the hot and energetic Universe with its launch foreseen in 2028. Microcalorimeters based on superconducting Transition-edge sensor (TES) are the chosen technology for the detectors array of the X-ray Integral Field Unit (X-IFU) on board of Athena. The X-IFU is a 2-D imaging integral-field spectrometer operating in the soft X-ray band (0.3–12keV). The detector consists of an array of 3840 TESs coupled to X-ray absorbers and read out in the MHz bandwidth using Frequency Domain Multiplexing (FDM) based on Superconducting QUantum Interference Devices (SQUIDs). The proposed design calls for devices with a high filling-factor, high quantum efficiency, relatively high count-rate capability and an energy resolution of 2.5eV at 5.9keV. The paper will review the basic principle and the physics of the TES-based microcalorimeters and present the state-of-the art of the FDM read-out.

Probing the gaseous halo of galaxies through non-thermal emission from AGN-driven outflows

Feedback from outflows driven by active galactic nuclei (AGN) can affect the distribution and properties of the gaseous halos of galaxies. We study the hydrodynamics and non-thermal emission from the forward outflow shock produced by an AGN-driven outflow. We consider a few possible profiles for the halo gas density, self-consistently constrained by the halo mass, redshift and the disk baryonic concentration of the galaxy. We show that the outflow velocity levels off at $\sim 10^3\,\rm km\, s^{-1}$ within the scale of the galaxy disk. Typically, the outflow can reach the virial radius around the time when the AGN shuts off. We show that the outflows are energy-driven, consistently with observations and recent theoretical findings. The outflow shock lights up the halos of massive galaxies across a broad wavelength range. For Milky Way (MW) mass halos, radio observations by The Jansky Very Large Array (JVLA) and The Square Kilometer Array (SKA) and infrared/optical observations by The James Webb Space Telescope (JWST) and Hubble Space Telescope (HST) can detect the emission signal of angular size $\sim 8"$ from galaxies out to redshift $z\sim5$. Millimeter observations by The Atacama Large Millimeter/submillimeter Array (ALMA) are sensitive to non-thermal emission of angular size $\sim 18"$ from galaxies at redshift $z\lesssim1$, while X-ray observations by Chandra, XMM-Newton and The Advanced Telescope for High Energy Astrophysics (ATHENA) is limited to local galaxies ($z\lesssim 0.1$) with an emission angular size of $\sim2'$. Overall, the extended non-thermal emission provides a new way of probing the gaseous halos of galaxies at high redshifts.