Advanced Microwave Sounding Unit-A Channels Research Articles

Exploring the footprint representation of microwave radiance observations in an Arctic limited-area data assimilation system

Abstract. The microwave radiances are key observations, especially over data-sparse regions, for operational data assimilation in numerical weather prediction (NWP). An often applied simplification is that these observations are used as point measurements; however, the satellite field of view may cover many grid points of high-resolution models. Therefore, we examine a solution in high-resolution data assimilation to better account for the spatial representation of the radiance observations. This solution is based on a footprint operator implemented and tested in the variational assimilation scheme of the AROME-Arctic (Application of Research to Operations at MEsoscale – Arctic) limited-area model. In this paper, the design and technical challenges of the microwave radiance footprint operator are presented. In particular, implementation strategies, the representation of satellite field-of-view ellipses, and the emissivity retrieval inside the footprint area are discussed. Furthermore, the simulated brightness temperatures and the sub-footprint variability are analysed in a case study, indicating particular areas where the use of the footprint operator is expected to provide significant added value. For radiances measured by the Advanced Microwave Sounding Unit-A (AMSU-A) and Microwave Humidity Sounder (MHS) sensors, the standard deviation of the observation minus background (OmB) departures is computed over a short period in order to compare the statistics of the default and the implemented footprint observation operator. For all operationally used AMSU-A and MHS tropospheric channels, it is shown that the standard deviation of OmB departures is reduced when the footprint operator is applied. For AMSU-A radiances, the reduction is around 1 % for high-peaking channels and about 4 % for low-peaking channels. For MHS data, this reduction is somewhere between 1 %–2 % by the footprint observation operator.

Primary Impact Evaluation of Surface Temperature Observations for Microwave Temperature Sounding Data Assimilation over Land

Observations from the Advanced Microwave Sounding Unit-A (AMSU-A) onboard polar-orbiting satellites are considered to be the most effective satellite data in terms of obviously reducing operational prediction errors. However, there are still significant difficulties in the application of AMSU-A low-level channel data assimilation over land. One of them is the inaccurate surface skin temperature (SKT) of the background on land areas, which leads to significant uncertainty in the accuracy of simulating brightness temperature (BT) in these channels. Therefore, improving the accuracy of SKT in the background field is a direct way to improve the assimilation effect of these low-level channel data over land. In this study, both high-spatio-temporal-resolution automatic weather station (AWS) observation data from China in September 2021 and the AMSU-A observation data from NOAA-15/18/19 and MetOp-A were used. Based on the Advanced Research version of the Weather Research and Forecast model (WRF-ARW) and Gridpoint Statistical Interpolation (GSI) assimilation system, we first analyzed the differences in SKT between AWS observations and model simulations and then attempted to directly replace the simulated SKT with the observation data. On this basis, the differences in BT simulation effects over the land area of Southwest China before and after replacement were meticulously analyzed and compared. In addition, the impacts of SKT replacement in areas with different terrain elevations and in cloudy areas were also evaluated. The results indicate that the SKTs of background fields were generally lower than the surface observations, whereas the diurnal variation in SKT was not well simulated. After replacing the SKT of the background field with station observations, the BT differences between the observation and background (O–B, observation minus background) were remarkably reduced, especially for channels 3–5 and 15 of the AMSU-A. The volume of data passing the GSI quality control significantly increased, and the standard deviation of O–B decreased. Further analysis showed that the improvement effect was better in areas at an elevation above 1600 m. Moreover, introducing SKT observations leads to a significant and stable improvement over BT simulations in cloudy areas over land.

Assimilation of the AMSU-A radiances using the CESM (v2.1.0) and the DART (v9.11.13)–RTTOV (v12.3)

Abstract. To improve the initial condition (“analysis”) for numerical weather prediction, we attempt to assimilate observations from the Advanced Microwave Sounding Unit-A (AMSU-A) on board the low-Earth-orbiting satellites. The data assimilation system, used in this study, consists of the Data Assimilation Research Testbed (DART) and the Community Earth System Model as the global forecast model. Based on the ensemble Kalman filter scheme, DART supports the radiative transfer model that is used to simulate the satellite radiances from the model state. To make the AMSU-A data available to be assimilated in DART, preprocessing modules are developed, which consist of quality control, spatial thinning, and bias correction processes. In the quality control, two sub-processes are included, outlier test and channel selection, depending on the cloud condition and surface type. The bias correction process is divided into scan-bias correction and air-mass-bias correction. Like input data used in DART, the observation errors are also estimated for the AMSU-A channels. In the trial experiments, a positive analysis impact is obtained by assimilating the AMSU-A observations on top of the DART data assimilation system that already makes use of the conventional measurements. In particular, the analysis errors are significantly reduced in the whole troposphere and lower stratosphere over the Northern Hemisphere. Overall, this study demonstrates a positive impact on the analysis when the AMSU-A observations are assimilated in the DART assimilation system.

Development and Evaluation of AMSU-A Cloud Detection over the Tibetan Plateau

Advanced Microwave Sounding Unit-A (AMSU-A) and Microwave Humidity Sounder (MHS) data have been widely assimilated in operational forecasting systems. However, effective distinction between cloudy and clear-sky data is still an essential prerequisite for the assimilation of microwave observations. Cloud detection over the Tibetan Plateau has long been a challenge owing to the influence of low temperatures, terrain height, surface vegetation, and inaccurate background fields. Based on the variations in the response characteristics of different channels of AMSU-A to clouds, five AMSU-A window and low-peaking channels (channels 1–4 and 15) are chosen to establish a cloud detection index. Combined with the existing MHS cloud detection index, a cloud detection scheme over the Tibetan Plateau is proposed. Referring to VISSR-II (Stretched Visible and Infrared Spin Scan Radiometer-II) and CALIPSO (The Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) cloud classification products, the detection rate of cloudy data and the rejection rate of clear-sky data under different cloud index thresholds are evaluated. Results show that the new cloud detection scheme can identify more than 80% of cloudy data on average, but this decreases to 72% for area with terrain higher than 5 km, and the false deletion rate remains stable at 45%. The detection rates of mixed clouds and cumulonimbus are higher than 90%, but it is lower than 50% for altostratus with an altitude of about 7–8 km. Comparative analysis shows that the new method is more suitable for areas with terrain higher than 700 m. Based on the cloud detection results, the effects of terrain height on the characteristics of observation error and bias are also discussed for AMSU-A channels 5 and 6.

Toward All-Sky Assimilation of Microwave Temperature Sounding Channels in Environment Canada’s Global Deterministic Weather Prediction System

Abstract The all-sky assimilation of radiances from microwave instruments is developed in the 4D-EnVar analysis system at Environment and Climate Change Canada (ECCC). Assimilation of cloud-affected radiances from Advanced Microwave Sounding Unit-A (AMSU-A) temperature sounding channels 4 and 5 for non-precipitating scenes over the ocean surface is the focus of this study. Cloud-affected radiances are discarded in the ECCC operational data assimilation system due to the limitations of forecast model physics, radiative transfer models, and the strong nonlinearity of the observation operator. In addition to using symmetric estimate of innovation standard deviation for quality control, a state-dependent observation error inflation is employed at the analysis stage. The background-state clouds are scaled by a factor of 0.5 to compensate for a systematic overestimation by the forecast model before being used in the observation operator. The changes in the fit of the background state to observations show mixed results. The number of AMSU-A channels 4 and 5 assimilated observations in the all-sky experiment is 5%–12% higher than in the operational system. The all-sky approach improves temperature analysis when verified against ECMWF operational analysis in the areas where the extra cloud-affected observations were assimilated. Statistically significant reductions in error standard deviation by 1%–4% for the analysis and forecasts of temperature, specific humidity, and horizontal wind speed up to maximum 4 days were achieved in the all-sky experiment in the lower troposphere. These improvements result mainly from the use of cloud information for computing the observation-minus-background departures. The operational implementation of all-sky assimilation is planned for the fall of 2021.

Development and Evaluation of a New Method for AMSU-A Cloud Detection over Land

Satellite data are the main source of information for operational data assimilation systems, and Advanced Microwave Sounding Unit-A (AMSU-A) data are one of the types of satellite data that contribute most to the reduction of numerical forecast errors. However, the assimilation of AMSU-A data over land lags behind that over the ocean. In this respect, the accuracy of cloud detection over land is one of the factors affecting the assimilation of AMSU-A data, especially for the window and low-peaking channel (23–53.59 GHz and 89 GHz) data. Strong surface emissivity and high spatial and temporal variability make it difficult to distinguish between the radiative contributions of clouds and the atmosphere. Based on the differences in the response characteristics of different channels to clouds, five AMSU-A window and low-peaking channels (channels 1–4 and 15) were selected to develop a new index for cloud detection over land. Case studies showed that the AMSU-A cloud index can detect most of the convective clouds; additionally, by further matching the MHS (Microwave Humidity Sounder) cloud detection index, we can effectively distinguish between cloudy and clear-sky observations. Batch test results also verified the accuracy and stability of the new cloud detection method. By referring to the MODIS (Moderate Resolution Imaging Spectroradiometer) cloud product, the POD (probability of detection) of the cloud fields of view with the new method was nearly 84%. By using the new cloud detection method to remove the cloudy data, the bias and standard deviation of the observation-minus-simulated brightness temperature (O−B) were significantly reduced, with the bias of O−B for channels 2–4 being below 1.0 K and the standard deviation of channels 5 and 6 being nearly 1.0 K.

Combining FY-3D MWTS-2 with AMSU-A Data for Inter-Decadal Diurnal Correction and Climate Trends of Atmospheric Temperature

Microwave temperature sounding observations from polar-orbiting meteorological satellites have been widely used for research on climate trends of atmospheric temperature at different heights around the world. Taking the Amazon rainforest as the target area, this study combined the Microwave Temperature Sounder-2 (MWTS-2) data onboard the Chinese FengYun-3D (FY-3D) satellite with the Advanced Microwave Sounding unit-A (AMSU-A) data onboard the National Oceanic and Atmospheric Administration (NOAA) and the European Meteorological Operational (MetOp) polar-orbiting meteorological satellites (i.e., NOAA-15, −18, −19, MetOp-A, -B). The double difference method was used to estimate and thus eliminate the inter-sensor bias, and a decadal diurnal correction was used to reduce the impact of different local equator crossing times on climate trends. The “no-rain” conditions were determined for AMSU-A data by channels 1 and 15, and for MWTS-2 data by channels 1 and 7. Finally, the decadal linear trends of atmospheric temperature from 1998 to 2020 were obtained after applying the inter-sensor bias calibration and inter-decadal diurnal correction to AMSU-A and MWTS-2 data from NOAA-15, −18, −19; MetOp-A, -B; and FY-3D. A warming trend was found in the AMSU-A window and tropospheric channels (1–9 and 15) and a cooling trend in stratospheric channels (10–14). The warming (cooling) trends of channels 7–9 (10) were relatively small. The warming (cooling) trends of AMSU-A channels 1–6 (14–15) were significantly reduced after the inter-decadal diurnal correction.

Assessing Sensitivity of MERRA-2 to AMSU-A in the Upper Stratosphere

AbstractMicrowave temperature sounders provide key observations in data assimilation, both in the current and historical global observing systems, as they provide the largest amount of horizontal and vertical temperature information due to their insensitivity to clouds. In the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2), microwave sounder radiances from the Advanced Microwave Sounding Unit-A (AMSU-A) are assimilated beginning with NOAA-15 and continuing through the current period. The time series of observation minus background statistics for AMSU-A channels sensitive to the upper stratosphere and lower mesosphere show variabilities due to changes in the AMSU-A constellation in the early AMSU-A period. Noted discrepancies are seen at the onset and exit of AMSU-A observations on the NOAA-15, NOAA-16, NOAA-17, and NASA EOS Aqua satellites. This effort characterizes the sensitivity, both in terms of the observations and the MERRA-2 data. Furthermore, it explores the use of reprocessed and intercalibrated datasets to evaluate whether these homogenized observations can reduce the disparity due to change in instrumental biases against the model background. The results indicate that the AMSU-A radiances used in MERRA-2 are the fundamental cause of this interplatform sensitivity, which can be mitigated by using reprocessed data. The results explore the importance of the reprocessing of the AMSU-A radiances as well as their intercalibration.

Inter-Calibration of AMSU-A Window Channels

More than one decade of observations from the Advanced Microwave Sounding Unit-A (AMSU-A) onboard the polar-orbiting satellites NOAA-15 to NOAA-19 and European Meteorological Operational satellite program-A (MetOp-A) provided global information on atmospheric temperature profiles, water vapor, cloud, precipitation, etc. These observations were primarily intended for weather related prediction and applications, however, in order to meet the requirements for climate application, further reprocessing must be conducted to first eliminate any potential satellites biases. After the geolocation and cross-scan bias corrections were applied to the dataset, follow-on research focused on the comparison amongst AMSU-A window channels (e.g., 23.8, 31.4, 50.3 and 89.0 GHz) from the six different satellites to remove any inter-satellite inconsistency. Inter-satellite differences can arise from many error sources, such as bias drift, sun-heating-induced instrument variability in brightness temperatures, radiance dependent biases due to inaccurate calibration nonlinearity, etc. The Integrated microwave inter-calibration approach (IMICA) approach was adopted in this study for inter-satellite calibration of AMSU-A window channels after the appropriate standard deviation (STD) thresholds were identified to restrict Simultaneous Nadir Overpass (SNO) data for window channels. This was a critical step towards the development of a set of fundamental and thematic climate data records (CDRs) for hydrological and climatological applications. NOAA-15 served as the main reference satellite for this study. For ensuing studies that expand to beyond 2015, however, it is recommended that a different satellite be adopted as the reference due to concerns over potential degradation of NOAA-15 AMSU-A.

Development and Testing of a Clear-Sky Data Selection Algorithm for FY-3C/D Microwave Temperature Sounder-2

The Fengyun (FY)-3C/D microwave temperature sounder-2 (MWTS-2) is similar to the Advanced Microwave Sounding Unit-A (AMSU-A), except it lacks two window channels located at 23.8 GHz and 31.4 GHz. This makes a clear-sky data determination challenging for the MWTS-2 due to the unavailability of cloud liquid water path (LWP) retrievable from the two window channels. The purpose of this study is to develop a clear-sky data selection algorithm for the FY-3C/D MWTS-2 based on the bias-removed differences between observations and model simulations of the MWTS-2 50.3-GHz channel 1 (or equivalently AMSU-A channel 3). First, a point is defined as a temporal clear-sky (cloudy) point if the bias-removed difference between observed and simulated brightness temperatures is smaller than or equal to (greater than) 2 K. Then, a temporal clear-sky (cloudy) point is defined as a final clear-sky (cloudy) point if all points within its 60-km (100-km) radial distance are temporal clear-sky (cloudy) points. Finally, if the mean value of the bias-removed differences between observations and simulations in the 100-km circle from a temporal cloudy point are smaller than or equal to (greater than) 2 K, all temporal clear-sky points within this circle are (not) taken as the final clear-sky points. Applications of this algorithm to FY-3C MWTS-2 and MetOp-B AMSU-A lead to the following conclusions: (i) more than 70% (95%) of the clear-sky (cloudy) data points are successfully identified from both AMSU-A and MWTS-2 observations; (ii) the algorithm-selected clear-sky data points were located in clear-sky areas in the GOES-15 imager, and (iii) the bias-removed differences between observations and model simulations of MWTS-2 channel 1 well reveals the eye, the eyewall, and the spiral rainband structure of Super Typhoon Halong (2014).

NOAA Operational Microwave Sounding Radiometer Data Quality Monitoring and Anomaly Assessment Using COSMIC GNSS Radio-Occultation Soundings

National Oceanic and Atmospheric Administration (NOAA) operational Advanced Technology Microwave Sounder (ATMS) and Advanced Microwave Sounding Unit-A (AMSU-A) data used in numerical weather prediction and climate analysis are essential to protect life and property and maintain safe and efficient commerce. Routine data quality monitoring and anomaly assessment is important to sustain data effectiveness. One valuable parameter used to monitor microwave sounder data quality is the antenna temperature (Ta) difference (O-B) computed between direct instrument Ta measurements and forward radiative transfer model (RTM) brightness temperature (Tb) simulations. This requires microwave radiometer data to be collocated with atmospheric temperature and moisture sounding profiles, so that representative boundary conditions are used to produce the RTM-simulated Tb values. In this study, Constellation Observing System for Meteorology, Ionosphere, and Climate/Formosa Satellite Mission 3 (COSMIC) Global Navigation Satellite System (GNSS) Radio Occultation (RO) soundings over the ocean and equatorward of 60° latitude are used as input to the Community RTM (CRTM) to generate simulated NOAA-18, NOAA-19, Metop-A, and Metop-B AMSU-A and S-NPP and NOAA-20 ATMS Tb values. These simulated Tb values, together with observed Ta values that are nearly simultaneous in space and time, are used to compute Ta O-B statistics on monthly time scales for each instrument. In addition, the CRTM-simulated Tb values based on the COSMIC GNSS RO soundings can be used as a transfer standard to inter-compare Ta values from different microwave radiometer makes and models that have the same bands. For example, monthly Ta O-B statistics for NOAA-18 AMSU-A Channels 4–12 and NOAA-20 ATMS Channels 5–13 can be differenced to estimate the “double-difference” Ta biases between these two instruments for the corresponding frequency bands. This study reveals that the GNSS RO soundings are critical to monitoring and trending individual instrument O-B Ta biases and inter-instrument “double-difference” Ta biases and also to estimate impacts of some sensor anomalies on instrument Ta values.

Impacts of AMSU-A inter-sensor calibration and diurnal correction on satellite-derived linear and nonlinear decadal climate trends of atmospheric temperature

Satellite microwave temperature sounding data have been widely used in the study of climate trends over the past decades. When merging advanced microwave sounding unit-A (AMSU-A) data from 1998 to 2017 from different satellites, brightness temperature observations can be affected by differences in the center frequency, incidence angle, and local equator crossing time (LECT) among the instruments. Atmospheric drag and gravity variations with latitude can also cause orbital drift that leads to changes in LECT of the same instrument. Inter-sensor calibration and diurnal correction are thus necessary before applying AMSU-A data to climate studies. In this study, AMSU-A data from the National Oceanic and Atmospheric Administration’s (NOAA’s) -15, -18, and -19 satellites and the European Organization for the Exploitation of Meteorological Satellites MetOp-A/-B collected during 1998–2017 were first inter-calibrated by a double difference method to remove inter-sensor biases. AMSU-A data from NOAA-18 was used as the reference for the double difference inter-sensor calibration. A diurnal correction was then applied to data over the Amazon rainforest to eliminate the effects of different LECTs. Finally, linear and nonlinear climate trends were calculated to show that warming (cooling) trends over the Amazon rainforest for window and tropospheric AMSU-A channels 1–8 and 15 (stratospheric channels 9–14) significantly decreased (increased) if inter-sensor calibration and a diurnal correction was applied. The nonlinear climate trends reveal more rapid warming trends for tropospheric sounding channels 3–7 and 15 and less rapid cooling trends for stratospheric channels 10–12 during 1998–2008 than during 2008–2017. Channels 1–2 (channel 13) have cooling (warming) and warming (cooling) trends before and after 2008, respectively.

Evaluation and Assimilation of the Microwave Sounder MWHS-2 Onboard FY-3C in the ECMWF Numerical Weather Prediction System

This paper presents an evaluation of the quality of data from the MicroWave Humidity Sounder-2, flown on the FY-3C polar orbiting satellite, and first results of trials assimilating the data in all-sky conditions in the European Centre for Medium Range Weather Forecasts’ assimilation system. This instrument combines traditional microwave humidity sounding capabilities at 183 GHz with new channels at 118 GHz, which have never before been available from space. The aim of this paper is twofold: to contribute to the calibration/validation of this satellite by evaluating the data and to test for the first time the impact of assimilating 118-GHz sounding channels in a global numerical weather prediction system. MWHS-2 was first evaluated by comparing observation minus short-range forecast statistics to similar instruments, which indicated that the quality was generally similar. Adding the 118- and 183-GHz channels to the full operational observing system led to small improvements in the short-range (~12 h) forecast accuracy for both sets of channels, and improvements in the 2–4-day wind forecast accuracy for the 183-GHz channels. Short-range forecasts were improved for global humidity in particular when assimilating the 183-GHz channels (0.5% improvement) and for cloud and low-level wind in the Southern Hemisphere extra-tropics when assimilating the 118-GHz channels (by, respectively, 0.5% and 0.2%). In the absence of other atmospheric observations, assimilating the 118-GHz channels improved the global forecast accuracy, but the overall impact was less than for the 183-GHz channels, or for equivalent Advanced Microwave Sounding Unit-A channels.

Effects of diurnal adjustment on biases and trends derived from inter-sensor calibrated AMSU-A data

Measurements of brightness temperatures from Advanced Microwave Sounding Unit-A (AMSU-A) temperature sounding instruments onboard NOAA Polarorbiting Operational Environmental Satellites (POES) have been extensively used for studying atmospheric temperature trends over the past several decades. Intersensor biases, orbital drifts and diurnal variations of atmospheric and surface temperatures must be considered before using a merged long-term time series of AMSU-A measurements from NOAA-15, -18, -19 and MetOp-A.We study the impacts of the orbital drift and orbital differences of local equator crossing times (LECTs) on temperature trends derivable from AMSU-A using near-nadir observations from NOAA-15, NOAA-18, NOAA-19, and MetOp-A during 1998–2014 over the Amazon rainforest. The double difference method is firstly applied to estimation of inter-sensor biases between any two satellites during their overlapping time period. The inter-calibrated observations are then used to generate a monthly mean diurnal cycle of brightness temperature for each AMSU-A channel. A diurnal correction is finally applied each channel to obtain AMSU-A data valid at the same local time. Impacts of the inter-sensor bias correction and diurnal correction on the AMSU-A derived long-term atmospheric temperature trends are separately quantified and compared with those derived from original data. It is shown that the orbital drift and differences of LECTamong different POESs induce a large uncertainty in AMSU-A derived long-term warming/cooling trends. After applying an inter-sensor bias correction and a diurnal correction, the warming trends at different local times, which are approximately the same, are smaller by half than the trends derived without applying these corrections.

All-Sky Microwave Radiance Assimilation in NCEP’s GSI Analysis System

AbstractThe capability of all-sky microwave radiance assimilation in the Gridpoint Statistical Interpolation (GSI) analysis system has been developed at the National Centers for Environmental Prediction (NCEP). This development effort required the adaptation of quality control, observation error assignment, bias correction, and background error covariance to all-sky conditions within the ensemble–variational (EnVar) framework. The assimilation of cloudy radiances from the Advanced Microwave Sounding Unit-A (AMSU-A) microwave radiometer for ocean fields of view (FOVs) is the primary emphasis of this study.In the original operational hybrid 3D EnVar Global Forecast System (GFS), the clear-sky approach for radiance data assimilation is applied. Changes to data thinning and quality control have allowed all-sky satellite radiances to be assimilated in the GSI. Along with the symmetric observation error assignment, additional situation-dependent observation error inflation is employed for all-sky conditions. Moreover, in addition to the current radiance bias correction, a new bias correction strategy has been applied to all-sky radiances. In this work, the static background error variance and the ensemble spread of cloud water are examined, and the levels of cloud variability from the ensemble forecast in single- and dual-resolution configurations are discussed. Overall, the all-sky approach provides more realistic simulated brightness temperatures and cloud water analysis increments, and improves analysis off the west coasts of the continents by reducing a known bias in stratus. An approximate 10% increase in the use of AMSU-A channels 1–5 and a 12% increase for channel 15 are also observed. The all-sky AMSU-A radiance assimilation became operational in the 4D EnVar GFS system upgrade of 12 May 2016.

Connecting the Time Series of Microwave Sounding Observations from AMSU to ATMS for Long-Term Monitoring of Climate

Abstract The measurements from the Microwave Sounding Unit (MSU) and the Advanced Microwave Sounding Unit-A (AMSU-A) on board NOAA polar-orbiting satellites have been extensively utilized for detecting atmospheric temperature trend during the last several decades. After the launch of the Suomi National Polar-orbiting Partnership (Suomi-NPP) satellite on 28 October 2011, MSU and AMSU-A time series will be overlapping with the Advanced Technology Microwave Sounder (ATMS) measurements. While ATMS inherited the central frequency and bandpass from most of AMSU-A sounding channels, its spatial resolution and noise features are, however, distinctly different from those of AMSU. In this study, the Backus–Gilbert method is used to optimally resample the ATMS data to AMSU-A fields of view (FOVs). The differences between the original and resampled ATMS data are demonstrated. By using the simultaneous nadir overpass (SNO) method, ATMS-resampled observations are collocated in space and time with AMSU-A data. The intersensor biases are then derived for each pair of ATMS–AMSU-A channels. It is shown that the brightness temperatures from ATMS now fall well within the AMSU data family after resampling and SNO cross calibration. Thus, the MSU–AMSU time series can be extended into future decades for more climate applications.

Characterizing Channel Center Frequencies in AMSU-A and MSU Microwave Sounding Instruments

Abstract Passive microwave observations from the Microwave Sounding Unit (MSU) and the Advanced Microwave Sounding Unit-A (AMSU-A) have been exploited widely for numerical weather prediction (NWP), atmospheric reanalyses, and climate monitoring studies. The treatment of biases in these observations, with respect to models as well as between satellites, has been the focus of much effort in recent years. This study presents evidence that shifts, drifts, and uncertainties in pass band center frequencies are a significant contribution to these biases. Center frequencies for AMSU-A channels 6–14 and MSU channel 3 have been analyzed using NWP fields and radiative transfer models, for a series of operational satellites covering the period 1979–2012. AMSU-A channels 6 (54.40 GHz), 7 (54.94 GHz), and 8 (55.50 GHz) on several satellites exhibit significant shifts and drifts relative to nominal pass band center frequencies. No significant shifts were found for AMSU-A channels 9–14, most probably as a consequence of the active frequency locking of these channels. For MSU channel 3 (54.96 GHz) most satellites exhibit large shifts, the largest for the earliest satellites. For example, for the first MSU on the Television and Infrared Observation Satellite-N (TIROS-N), the analyzed shift is 68 MHz over the lifetime of the satellite. Taking these shifts into account in the radiative transfer modeling significantly improves the fit between model and observations, eliminates the strong seasonal cycle in the model–observation misfit, and significantly improves the bias between NWP models and observations. The study suggests that, for several channels studied, the dominant component of the model–observation bias results from these spectral errors, rather than radiometric bias due to calibration errors.

Uncertainty of AMSU-A derived temperature trends in relationship with clouds and precipitation over ocean

Microwave Sounding Unit (MSU) and Advanced Microwave Sounding Unit-A (AMSU-A) observations from a series of National Oceanic and Atmospheric Administration satellites have been extensively utilized for estimating the atmospheric temperature trend. For a given atmospheric temperature condition, the emission and scattering of clouds and precipitation modulate MSU and AMSU-A brightness temperatures. In this study, the effects of the radiation from clouds and precipitation on AMSU-A derived atmospheric temperature trend are assessed using the information from AMSU-A window channels. It is shown that the global mean temperature in the low and middle troposphere has a larger warming rate (about 20–30 % higher) when the cloud-affected radiances are removed from AMSU-A data. It is also shown that the inclusion of cloud-affected radiances in the trend analysis can significantly offset the stratospheric cooling represented by AMSU-A channel 9 over the middle and high latitudes of Northern Hemisphere.

Impact of Assimilating AMSU-A Radiances on Forecasts of 2008 Atlantic Tropical Cyclones Initialized with a Limited-Area Ensemble Kalman Filter

Abstract The impact of assimilating radiance observations from the Advanced Microwave Sounding Unit-A (AMSU-A) on forecasts of several tropical cyclones (TCs) was studied using the Weather Research and Forecasting Model (WRF) and a limited-area ensemble Kalman filter (EnKF). Analysis/forecast cycling experiments with and without AMSU-A radiance assimilation were performed over the Atlantic Ocean for the period 11 August–13 September 2008, when five named storms formed. For convenience, the radiance forward operators and bias-correction coefficients, along with the majority of quality-control decisions, were computed by a separate, preexisting variational assimilation system. The bias-correction coefficients were obtained from 3-month offline statistics and fixed during the EnKF analysis cycles. The vertical location of each radiance observation, which is required for covariance localization in the EnKF, was taken to be the level at which the AMSU-A channels’ weighting functions peaked. Deterministic 72-h WRF forecasts initialized from the ensemble-mean analyses were evaluated with a focus on TC prediction. Assimilating AMSU-A radiances produced better depictions of the environmental fields when compared to reanalyses and dropwindsonde observations. Radiance assimilation also resulted in substantial improvement of TC track and intensity forecasts with track-error reduction up to 16% for forecasts beyond 36 h. Additionally, assimilating both radiances and satellite winds gave markedly more benefit for TC track forecasts than solely assimilating radiances.

Quality Assessments of Chinese FengYun-3B Microwave Temperature Sounder (MWTS) Measurements

Following the successful launch of the first polar-orbiting morning-configured satellite, FY-3A, on May 27, 2008, in a new Fengyun three (FY-3) series, the second afternoon-configured polar-orbiting satellite (FY-3B) was launched on November 5, 2010. The four-channel Microwave Temperature Sounder (MWTS) was onboard both FY-3A/B satellites, with designed channel frequency similar to channels 3, 5, 7, and 9 of the Advanced Microwave Sounding Unit-A (AMSU-A). This study assesses the quality of the brightness temperature measurements from FY-3B MWTS by comparing them with numerical weather prediction (NWP) model simulations and NOAA-18 AMSU-A measurements with the same frequencies. A strong latitudinal-dependent bias is found for both MWTS channel 3 and AMSU-A channel 7. At channel 4, the brightness temperatures are contaminated within a small latitudinal zone ( ~ 30°-40°N) of the Northern Hemisphere. It is also found that the MWTS channel 4 bias is strongly asymmetric across the scan and the fourth field of view (FOV4) of channel 4 is globally and systematically warmer than its neighboring FOVs. These anomalous biases may arise from sidelobe effect and interferences of the signal transmitted from some unknown sources. A quality control algorithm is developed to remove the anomalous data at MWTS channel 4 for its applications in NWP.