Particulate Matter Adsorption Research Articles

Sunlight-Driven Self-Cleaning Ultrafine Particulate Matter Filter with Antibacterial Activity.

Air pollution by particulate matter (PM) and airborne pathogens causes severe health problems in the human body. Presently, popular disposable air filters yield huge waste and have a fatal impact on the environment. Postuse cleaning of air filters also leads to secondary air and water pollution. Here, we report a sunlight-driven self-cleaning PM filter by coupling a full-solar-spectrum-active photocatalyst comprising up-conversion nanoparticles (UCNPs) decorated with semiconductor iron(III) oxide (UCNP@α-Fe2O3) shells stabilized upon graphene functionalized borosilicate fibrous membrane (rGO-BF). While rGO-BF ensures high PM adsorption, UCNP@α-Fe2O3 (NP) enables self-photodegradation of adsorbed PM under abundant sunlight and subsequent membrane regeneration, while preventing secondary air or water pollution. Rational surface chemistry and optimal microstructure enable our filters to remove >99% of PM2.5 under deplorable air-quality conditions. Moreover, our filter shows excellent antibacterial activity toward E. coli and S. aureus, demonstrating its potential for practical utilization in face masks, air filtering devices, and protective medical wear. This work successfully suggests an intriguing design platform for self-sustainable zero-waste air filter membranes.

Adsorption of particulate matter and uptake of metal and non-metal elements from PM in leaves of Pinus densiflora and Quercus acutissima: a comparative study

Trees can serve as effective biofilters of Particulate matter (PM) pollution, making them valuable for managing air pollution and promoting public health. Leaves of trees can reduce PM through absorption, adsorption, and fallout mechanisms, which are influenced by species-specific characteristics and environmental factors. Although several studies have explored the impact of various leaf characteristics on their ability to adsorb PM from field conditions, few have been conducted in controlled chambers to analyze the adsorption of PM on leaf surfaces and the uptake of metal and non-metal elements from PM on leaves. To fill these knowledge gaps, this study investigated the PM adsorption and leaf characteristics of two different tree species, Pinus densiflora (an evergreen coniferous species) and Quercus acutissima (a deciduous broad-leaved species) under controlled conditions in a PM exposure chamber with a target concentration of 300 μg m−3. The main aim of this study was to measure and compare the rate of PM component (metal and non-metal elements) uptake in two species and investigate the leaf characteristics that contribute to PM adsorption. We investigated the relationship between PM adsorption and physiolog, micro-morphology, and chemical properties of the leaf surface in two species. This study used a Pearson’s correlation analysis and a principal component analysis (PCA) to evaluate correlation between PM adsorption and leaf characteristics and uptake of metal/non-metal elements in PM on leaves. This result showed that leaf characteristics such as stomatal size, leaf roughness, and wax content played a crucial role in PM10 adsorption, while physiological factors like transpiration and leaf boundary layer conductance were identified as important determinants of PM2.5 adsorption on plant leaves. It also observed significant variations in the uptake of aluminum, iron, magnesium, phosphorus, and sulfur. This study not only advances our understanding of the mechanisms behind PM adsorption by tree leaves but also underscores the importance of selecting appropriate tree species based on their leaf characteristics for urban forestry and green infrastructure projects. The ability to strategically use tree species for PM pollution mitigation highlights a practical approach to enhancing environmental sustainability and public health.

Impact of atmospheric particulate matter retention on physiological characters of five plant species under different pollution levels in Zhengzhou.

Atmospheric particulate matter (PM) pollution has become a major environmental risk, and green plants can mitigate air pollution by regulating their enzymatic activity, osmoregulatory substances, photosynthetic pigments, and other biochemical characteristics. The present investigation aims to evaluate the mitigation potential of five common evergreen tree species (Photinia serrulata, Ligustrum lucidum, Eriobotrya japonica, Euonymus japonicus, Pittosporum tobira) against air pollution and to assess the effect of dust retention on plant physiological functions exposed to three different pollution levels (road, campus, and park). The results found that the amount of dust retained per unit leaf area of the plants was proportional to the mass concentration of atmospheric particulate matter in the environment, and that dust accumulation was higher on the road and campus than in the park. There were significant differences in dust retention among the five tree species, with the highest leaf dust accumulation observed for E. japonica (5.45 g·m-2), and the lowest for P. tobira (1.53 g·m-2). In addition, the increase in PM adsorption by different plants was uneven with increasing pollution levels, with significant decreases in chlorophyll content, photosynthetic and transpiration rate. From a physiological perspective, P. tobira exhibited greater potential to respond to PM pollution. Biochemical indicators suggested that PM pollution caused changes in plant protective enzyme activities, with a decrease in superoxide dismutase (SOD) and peroxidase (POD) activities, as well as promoting membrane lipid peroxidation, and appropriate stress also enables plants to counteract oxidative damage. In particular, PM exposure also induced stomatal constriction. Overall, PM retention was significantly associated with physiological and photosynthetic traits. In conclusion, our study contributes to the understanding of the effects of PM on plant physiology. Furthermore, it also provides insights into the selection of plants that are tolerant to PM pollution.

An efficient atmospheric pollution control using hierarchical porous nanofibers containing zeolitic-imidazolate-frameworks and hydroxyapatite nanoparticles

Air pollution due to contaminants such as particulate matter (PM) and bacteria has become a global atmospheric pollution issue. Identifying effective methods for removing PM and other contaminants such as bacteria is an important challenge, and several efforts are being made to resolve it. In this study, we introduced a polystyrene (PS) hierarchical porous nanofiber (HAP/ZIF-8 @PS HPNF) containing a zeolitic imidazolate framework (ZIF-8) and hydroxyapatite (HAP) for PM (PM2.5, PM10) filtration and antibacterial applications. HAP/ZIF-8 @PS HPNF was manufactured by electrospinning of ZIF-8, which has a synergistic effect on the adsorption of PM and HAP that have antibacterial properties. The modified nanofibers improved the filtration performance and antibacterial activity by adsorbing PM (efficiency = 96.68% for PM2.5 and 96.98% for PM10) and reducing microbial populations (S. aureus and E. coli.). Thus, the well-dispersed ZIF-8 and HAP on the nanofibers, the multifunctional nanofibers are appropriate for use in environments with harmful PM as well as bacteria.

PM2.5 and PM10 adsorption onto filters and surfaces functionalized with calcium carbonate particle assembly

Existing air-cleaning solutions more and more fail to tackle the escalating air pollution by particle manner. Here, a novel air-cleaning method is proposed based on assembled porous CaCO3 particle arrays on a glass surface and on air filter fibers. The composition and crystallographic structure of the CaCO3 particles are analyzed using advanced X-ray scattering techniques and Fourier transform infrared analysis. The strength of particle attachment to the glass surface under environmental conditions and the CaCO3 particles particulate matter (PM) interaction is studied by atomic force microscopy. The air cleaning process is studied by the exposure of these assembled particles to polluted air. It is shown that the adsorption of particulate matter is facilitated which affects the filtration efficiency. Biocompatible CaCO3 microparticle arrays effectively adsorb airborne particulate matter. CaCO3-coated air filters demonstrate over 10 times increased efficiency for particles smaller than 1 µm, enhancing the filters' quality factor by up to 22 times. Summarizing, this research offers a promising solution to combat air pollution and lays the groundwork to develop more advanced and efficient air purification technologies. SynopsisAssembled calcium carbonate particle arrays have been used to clean particulate matter from the air.

Environmental management: a country-level evaluation of atmospheric particulate matter removal by the forests of India.

Particulate matter (PM) is a critical air pollutant, responsible for an array of ailments leading to premature mortality worldwide. Nature-based solutions for mitigation of PM and especially role of forests in mitigating PM from an ecosystem perspective are less explored. Forests provide a natural pollution abatement strategy by providing a surface area for the deposition of PM. Depending on their structure and composition, forests have varying capacities for PM adsorption, which is again less explored. Hence, in the present study, we evaluate the removal capacity of PM by the forest-type groups of India. Deposition flux and total PM removal across sixteen forest types were estimated based on the 2019 dataset of PM using Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) data. Externality values and PM removal costs by industrial equipment were used for associating an economic value to the air pollution abatement service by forests. The total PM2.5 removal by forests in 2019 was estimated to be 1361.28 tons and PM10 was estimated to be 303,658.27 tons. Deposition of PM was found to be high in littoral and swamp forests, tropical semi-evergreen forests, tropical moist deciduous forests, and sub-tropical pine forests. Tropical dry deciduous forests had the highest net weight % removal of PM with 39% removal for PM2.5 and 39% removal for PM10. The air pollution abatement service by forests for PM removal was 188 M US dollars (USD) with externality-based removal service by forests of 2009 M USD. The net PM removed by all forests of India was estimated to be approximately worth ₹ 470-648 Crore (59-81 million dollars) for PM2.5 and worth ₹56,746-1,22,617 Crore (7093-15,327 million dollars) for PM10 based on valuation using value transfer method. The study concludes that forests can be a significant contributor to PM reduction at a global level. Especially for India's National Clean Air Programme and further research and policy considerations, the findings would be extremely useful.

Accelerated settling velocity of airborne particulate matter on hairy plant leaves

Phytoremediation has emerged as an ecofriendly technique to reduce hazardous particulate matter (PM) in the air. Although previous studies have conducted statistical analyses to reveal PM removal capabilities of various plant species according to their leaf characteristics, the underlying physical mechanism of PM adsorption of plants remains unclear. Conventional methodologies for measuring PM accumulation usually require long-term field tests and provide limited understanding on PM removal effects of individual leaf traits of various plants. In this study, we propose a novel methodology which can compare the electrostatic interactions between PMs and plant leaves according to their trichome structures by using digital in-line holographic microscopy (DIHM). Surface characteristics of Perilla frutescens and Capsicum annuum leaves are measured to examine electrostatic effects according to the morphological features of trichomes. 3D settling motions of PMs near the microstructures of trichomes of the two plant species are compared in detail. To validate the PM removal effect of the hairy microstructures, a polydimethylsiloxane (PDMS) replica model of a P. frutescens leaf is fabricated to demonstrate accelerated settling velocities of PMs near trichome-like microstructures. The size and electric charge distributions of PMs with irregular shapes are analyzed using DIHM. Numerical simulation of the PM deposition near a trichome-like structure is conducted to verify the empirical results. As a result, the settling velocities of PMs on P. frutescens leaves and a PDMS replica sample are 12.11 ± 1.88% and 34.06 ± 4.19% faster than those on C. annuum leaves and a flat PDMS sample, respectively. These findings indicate that the curved microstructures of hairy trichomes of plant leaves increase the ability to capture PMs by enhancing the electric field intensity just near trichomes. Compared with conventional methods, the proposed methodology can quantitatively evaluate the settling velocity of PMs on various plant leaves according to the morphological structure and density of trichomes within a short period of time. The present research findings would be widely utilized in the selection of suitable air-purifying plants for sustainable removal of harmful air pollutants in urban and indoor environments.

The ability of three climbing plant species to capture particulate matter and their physiological responses at different environmental sampling sites

The adsorption of particulate matter (PM) by the leaves of urban plants can effectively reduce the particulate matter concentration in the atmosphere. The use of climbing plants to abate particulate matter is an important means of urban greening in China, which is rich in climbing plant species. In this study, three evergreen climbing plants were selected to assess their ability to adsorb particulate matter and determine their physiological responses to particulate pollution. PM deposition was determined gravimetrically. There were four key results. 1) The adsorption capacity of the three evergreen climbers followed the order of Hedera nepalensis var > Ficus pumila Linn > Euonymus fortunei, and was significantly higher in an overpass environment than in a campus environment for all three species. 2) The seasonal characteristics of particulate adsorption by the three types of climbers in both the overpass and campus environments followed the order of winter > autumn > spring > summer. 3) The net photosynthetic rate of the three climbing plants was significantly affected by particulate matter in a size dependent manner, with fine particulate matter on the plant leaf surface and coarse particulate matter in the leaf waxy layer being important factors affecting plant photosynthesis. 4) Particulate pollution led to changes in the activities of plant protective enzymes in plants, with increases in the superoxide dismutase (SOD) and peroxidase (POD) activity, and the malondialdehyde (MDA) and soluble protein contents. There were different trends in the soluble sugar content among the different plant species. In conclusion, F. pumila had a strong resistance to particulate pollutants, while H. nepalensis was considered suitable for planting in polluted areas where it could improve ambient air quality by adsorbing large amounts of particulate matter.

Relationship between Leaf Traits and PM-Capturing Capacity of Major Urban-Greening Species

High concentrations of airborne particulate matter (PM) in urban areas are of great concern to human health. Urban greening has been shown to be an effective and eco-friendly way to alleviate particle pollution, and attention to its role in mitigating particle pollution has increased worldwide. The species-specific PM-capturing capacity of ten urban-greening species in Seoul was evaluated by leaf functional traits (average leaf area (ALA), specific leaf area (SLA), and leaf width-to-length ratio (W/L)), microstructures (roughness, stomata, and trichomes), and physicochemical traits (contact angle (θw), surface free energy (rs), the work of adhesion for water (Wa), and epicuticular wax loads (EWL)). The relationships between leaf traits and PM adsorption by leaves were revealed by Pearson’s correlations and principal component analysis (PCA). A gravimetric method was used to quantify, by particle size, the PM adsorbed on leaf surfaces or embedded in leaf epicuticular wax layers. The key factors for PM adsorption on leaf surfaces were the SLA, the mean roughness value (Ra), and stomatal size. The SLA and Ra of adaxial leaf surfaces were negatively correlated with PM accumulation on leaf surfaces, while stomatal length and width were positively correlated with surface PM load. The rs and EWL positively affected the in-wax PM load. Species-specific PM deposition was the result of complicated mechanisms of various leaf traits. Three evergreen shrub species, Buxus sinica (Rehder & E.H. Wilson) M.Cheng var. insularis (Nakai) M.Cheng, Taxus cuspidata Siebold & Zucc., and Euonymus japonicus Thunb., were efficient in capturing both surface PM and in-wax PM. The PCA revealed that the high PM accumulation efficiency of these three species might be attributable to the interaction between stomatal size and EWL. Aesculus turbinata Blume, Chionanthus retusus Lindl. & Paxton, and Rhododendron schlippenbachii Maxim. had intermediate PM adsorption ability, which might be a result of interactions among stomatal density, the Wa of adaxial surfaces, and ALA. Magnolia denudata Desr., Styphnolobium japonicum (L.) Schott, Liriodendron tulipifera L., and Ginkgo biloba L. had low PM accumulation efficiency. These four species exhibited correlations among SLA, the Ra of adaxial leaf surfaces, and W/L, which had negative effects on PM adsorption.

Particulate matter capturing over manganese dioxides with different crystal structures

Particulate matter (PM) is the main contributor to air pollution, and filtration has been reported to be promising for PM capturing. Considering the complexity of polluted air (volatile organic compounds (VOCs) and ozone are likely concomitant with PM particles) and in view of the versatility of MnO2 for the degradation of VOCs and ozone, the feasibility of MnO2 materials as PM filtering media was investigated in this study, and the effect of crystal structure on PM filtration was clarified. Compared with the layered δ-MnO2, the MnO2 with tunnel structure (including 1 × 2-, 2 × 2- and 3 × 3-MnO2) exhibited greatly enhanced PM removal efficiencies, and particularly, the 3 × 3-MnO2 possessed not only significant activity for adsorbing PM particles but also high utilization efficiency of the active surface. Physicochemical properties of the adsorbents were studied by XRD, ATR, isothermal N2 adsorption, SEM and (HR)TEM. The correlation between pore characteristics and particle elimination activity demonstrates that the most developed mesoporous structure of the 3 × 3-MnO2 sample played an important role in strengthening the PM adsorption capability. Further comparison of the surface properties of the fresh and spent samples reveals that with respective to the occasion of δ-MnO2, the structure of 3 × 3-MnO2 was robust enough to resist collapse after PM capturing and the great accommodation of the inorganic and organic PM substances in the voluminous pores induced strong affinity between PM particles and 3 × 3-MnO2. Thereby, a higher particle filtration ability was retained.

Integrating Tree Species Identity and Diversity in Particulate Matter Adsorption

The amount of PM bound by tree canopies depends on leaf traits, but also the leaf area available, both of which are dependent on tree identity. We investigated four species (Acer platanoides L., Tilia cordata Mill., Quercus robur L., Carpinus betulus L.) grown in monocultures and in two and four species polycultures. The amount of PM on the leaves of these species was determined by washing and fractionation of the PM into PM2.5, PM10 and PM100 size classes using a filtering method. The leaf area index was estimated by litter collection. The amount of PM2.5 per m2 leaf area was significantly higher in T. cordata compared to Q. robur and A. platanoides, and in C. betulus compared to A. platanoides. The leaf area index in monocultures was similar for all species except T. cordata which was considerably lower. Overyielding of LAI was shown in the two species polyculture of T. cordata and A. platanoides, and also in the four species polyculture. In polyculture, higher amounts of PM were determined in the two species polyculture of Q. robur and C. betulus and also in the four species polyculture. The result show that both tree identity and mixture influence the amount of PM in the canopy, and this is related to tree leaf traits, and also to overyielding of LAI in the polyculture.

Real-time selective measurement of combustion origin hydrophobic PM using QCM

Combustion origin particulate matter (PM) has different characteristics such as hydrophilicity and hydrophobicity depending on the combustion method, however it is difficult to separate each PM characteristics. In this study, to develop real-time selective PM sensing system using a quartz crystal microbalance (QCM), PM adsorption characteristics on the QCM surface was investigated. PM emitted from a pool flame of hydrocarbon fuel such as cyclohexane and toluene was supplied to the QCM, and the frequency shift of the QCM was measured. In addition, polystyrene coated QCM with hydrophobic and acetylcellulose coated QCM with hydrophilic characteristics were also investigated.

Particulate Matter (PM) Adsorption and Leaf Characteristics of Ornamental Sweet Potato (Ipomoea batatas L.) Cultivars and Two Common Indoor Plants (Hedera helix L. and Epipremnum aureum Lindl. & Andre)

Particulate matter (PM) is a serious threat to human health, climate, and ecosystems. Furthermore, owing to the combined influence of indoor and outdoor particles, indoor PM can pose a greater threat than urban PM. Plants can help to reduce PM pollution by acting as biofilters. Plants with different leaf characteristics have varying capacities to capture PM. However, the PM mitigation effects of plants and their primary factors are unclear. In this study, we investigated the PM adsorption and leaf characteristics of five ornamental sweet potato (Ipomea batatas L.) cultivars and two common indoor plants (Hedera helix L. and Epipremnum aureum Lindl. & Andre) exposed to approximately 300 μg m−3 of fly ash particles to assess the factors influencing PM adsorption on leaves and to understand the effects of PM pollution on the leaf characteristics of plants. We analyzed the correlation between PM adsorption and photosynthetic rate (Pn), stomatal conductance (gs), transpiration rate (Tr), leaf area (LA), leaf width/length ratio (W/L), stomatal density (SD), and stomatal pore size (SP). A Pearson’s correlation analysis and a principal component analysis (PCA) were used to evaluate the effects of different leaf characteristics on PM adsorption. The analysis indicated that leaf gas exchange factors, such as Pn and Tr, and morphological factors, such as W/L and LA, were the primary parameters influencing PM adsorption in all cultivars and species tested. Pn, Tr, and W/L showed a positive correlation with PM accumulation, whereas LA was negatively correlated.

Assessment of the Particulate Matter Reduction Potential of Climbing Plants on Green Walls for Air Quality Management

Background and objective To improve air quality, particulate matter (PM) can be reduced using green infrastructure. Therefore, in this study, we aimed to determine the particulate matter reduction potential of climbing plants used for green walls, an element of vertical green infrastructure. Methods A sealed chamber with controlled environmental variables was used to assess the PM reduction level caused by climbing plants. PM concentration in the plant chamber was measured after two and four hours of PM exposure, and the reduction potential was assessed based on the leaf area. Results Compared to the empty chamber (Control), the PM reduction speed per hour was higher in the plant chamber, which confirmed that climbing plants contribute to the reduction of PM in the air. The PM reduction speed immediately after exposure in the plant chamber was high, but this slowed over time. Additionally, PM has been continuously reduced in plants with large leaves. As a result of calculating the particulate matter reduction level based on leaf area, it was found that there was a difference by particle size. Actinidia arguta, Parthenocissus tricuspidata, Trachelospermum asiaticum, and Euonymus fortunei var. radicans showed a high reduction effect. The trichomes on the leaf surface of Trachelospermum asiaticum were found to affect PM reduction. Conclusion PM adsorption on the leaf surface is an important factor in reducing its concentration. It was possible to compare different plants by quantifying the amount of PM reduction during a fixed time period. These results can be used as the basic data to select the plant species suitable for urban green walls in terms of PM reduction.

Mycelium-composite panels for atmospheric particulate matter adsorption

Mycelium composites grow in a symbiotic relationship with the substrate forming entangled networks of branching fibers. The structure of mycelium resembles filter sheets used in air filtration systems. Owing to their porous character, mycelium composites have been studied and developed as sound absorbent materials, insulation materials, and fire-resistant materials. Herein, we investigated the potential utilization of the filter-like, porous characteristics of mycelium for adsorbing atmospheric particulate matter (PM).First, we compared the PM adsorption performance of mycelium composites grown on four different substrates (hemp, rice straw, lacquer tree wood chips, and oak wood chips) with a widely used architectural exterior material, a stone panel (Pocheon granite). Second, we examined the micro-morphology of the mycelium composite panel surfaces by capturing images at 200x and 1000x using scanning electron microscopy. Third, we examined the water absorption rate of the mycelium composite panels with different substrates.The PM adsorption performance of the mycelium composites were superior to that of the Pocheon granite. The PM adsorption performance of the mycelium composite panels varied depending on the type of the substrate. However, the relationship between the micro-morphology of the surface and the PM adsorption performance could not be defined. We also observed that the mycelium composite panels with the higher PM adsorption performance exhibited a higher rate of water absorption. This study shows that mycelium composite panels have potential to be developed as atmospheric PM adsorbing material.

Preparation and characterization of air nanofilters based on cellulose nanofibers

One of the most important environmental issues in the world today is the problem of air pollution, which includes particulate matter (PM) and greenhouse gases (mainly CO2). The production of efficient sustainable filters to overcome this concern as well as to provide an alternative to synthetic petroleum-based filters remains a demanding challenge. The purpose of this research was to first produce novel cellulose nanofibers (CNF) based nanofilter from a combination of CNF and chitosan (CS) and then evaluate its applicability for air purification. A number of structural and chemical properties as well as CO2 and PM adsorption efficiency of the modified CNF, were determined using advanced characterization techniques. After pretests, we determined the optimum loading for the CS was 1 wt%, and upon producing the samples, the CNF loadings (1, 1.5, and 2 wt%) were chosen as one variable. For particle absorption, the PM sizes (0.1, 0.3, 0.5, and 2.5 μm) were kept as other variables. Based on SEM results, we concluded the higher the concentration of CNF the higher the specific surface area and the lower the porosity and the diameter of the pores, which was confirmed by the BET test. Furthermore, the results showed that increasing the concentration of modified CNFs increases the adsorption rate of CO2 and PM and that the highest adsorption of CO2 and PM belonged to the 2% modified CNF.

Particulate Matter Removal Ability of Ten Evergreen Trees Planted in Korea Urban Greening

Broad-leaved evergreen trees create urban forests for mitigation of climate warming and adsorption of particulate matter (PM). This study was performed to identify the species suitable for urban greening by examining the adsorption capacity of the evergreen species in urban areas in Korea, the adsorption points and the elemental composition of PM in the adsorbed tree. Leaf sampling was carried out four times (period of seven months from October 2017 to May 2018) and used after drying (period 28 to 37 days). Particulate matter (PM) was classified and measured according to size PM2.5 (0.2–2.5 μm), PM10 (2.5–10 μm), PM100 (10–100 μm). The total amount of PM adsorbed on the leaf surface was highest in Pinus densiflora (24.6 μg∙cm−2), followed by Quercus salicina (47.4 μg∙cm−2). The composition of PM adsorbed by P. densiflora is 4.0% PM2.5, 39.5% PM10 and 56.5% PM100, while those adsorbed by Q. salicina are evergreen at 25.7% PM2.5, 27.4% PM10 and 46.9% PM100. When the amount of PM adsorbed on the leaf was calculated by LAI, the species that adsorbed PM the most was P. densiflora, followed by Q. salicina, followed by Q. salicina in the wax layer, then P. densiflora. As a result of this study, the amount of PM adsorbed per unit area of leaves, and the amount of PM calculated by LAI, showed a simpler pattern. The hardwoods had a high adsorption rate of PM2.5. The adsorption ratio of ultra-fine PM2.5 by evergreen broad-leaved trees was greater than that of coniferous trees. Therefore, broad-leaved evergreens such as Q. salicina are considered very suitable as species for adsorbing PM in the city. PM2.5 has been shown to be adsorbed through the pores and leaves of trees, indicating that the plant plays an important role in alleviating PM in the atmosphere. As a result of analyzing the elemental components of PM accumulated on leaf leaves by scanning electron microscopy (SEM)/ energy dispersive x-ray spectroscopy (EDXS) analysis, it was composed of O, C, Si, and N, and was found to be mainly generated by human activities around the road. The results of this study provide basic data regarding the selection of evergreen species that can effectively remove aerial PM. It also highlights the importance of evergreen plants for managing PM pollution during the winter and provides insights into planning additional green infrastructure to improve urban air quality.

A novel approach to designing air filters: Ubiquitous material-based Janus air filter modules with hydrophilic and hydrophobic parts

A ubiquitous material (sponge or cotton fabric)-based Janus air filter (JAF) with an optimized ratio of hydrophilic (75%) and hydrophobic (25%) parts was prepared using a simple and economical process that did not require specialized equipment or multiple steps. As a result of the hydrophobic part of the JAF, the adsorption of particulate matter (PM) was higher at the rear than at the front of the hydrophilic part of the JAF. The amount of PM adsorbed was further increased in the hydrophilic part of the JAF when the degree of hydrophobicity was increased in the hydrophobic part. The sponge/cotton JAFs exhibited excellent recyclability of up to 30 cycles with consistent long-term performance (RE: 99.99% and △P: 61 Pa) at extremely high PM2.5 concentrations (over 624,230 μg/m3) and air velocities (1.05 m/s). A modular JAF could achieve the performance of 99.89% at a PM0.3 concentration of 999 μg/m3 and air velocity of 1.05 m/s with a low pressure drop of 152 Pa.

Effects of crosslink density in zwitterionic hydrogel coatings on their antifouling performance and susceptibility to silt uptake

Hydrogel coatings effectively reduce the attachment of proteins and organisms in laboratory assays, in particular when made from zwitterionic monomers. In field experiments with multiple species and non-living material, such coatings suffer from adsorption of particulate matter. In this study, the zwitterionic monomer 3-[N-(2-methacryloyloxyethyl)-N,N-dimethylammonio] propanesulfonate (SPE) was copolymerized with increasing amounts of the photo-crosslinker benzophenon-4-yloxyethyl methacrylate (BPEMA) to systematically alter the density of crosslinks between the polymer chains. The effect of increasing crosslink density on the antifouling (AF) performance of the coatings was investigated in laboratory assays and fields tests. In both cases, the AF performance was improved by increasing the crosslinker content. The coatings reduced protein, diatom, and barnacle accumulation, and showed better resistance to biomass accumulation. The findings underline that the marine AF performance of hydrogel coatings does not only depend on the specific chemical structure of the polymers, but also on their physico-chemical properties such as rigidity and swelling.

Effects of Foliar Trichomes on the Accumulation of Atmospheric Particulates in Tillandsia Brachycaulos.

Foliar trichomes are specialized structures that have first contact with atmospheric particulate matter (PM), while their effects on PM accumulation are rarely investigated. In this study, epiphytic Tillandsia brachycaulos with foliar trichomes was investigated. Trichomes were removed artificially to investigate PM adsorption and resuspension. The results showed that the maximum PM (13.94±0.20 g•m-2) and natural PM content (10.65±1.10 g•m-2) on T. brachycaulos samples with foliar trichomes was significantly higher than those without foliar trichomes. After PM deposition on the leaf surface, more than 85% of PM was dispersed by wind in plants without trichomes, significantly higher than those with trichomes (30.2%). Therefore, the effects of foliar trichomes on PM were reflected not only on PM adsorption, but on PM resuspension. Foliar trichomes can decrease PM resuspension falling on the leaf surface and promote the accumulation of these particles.