Adipose-derived Stem Cell Spheroids Research Articles

The Transplantation of 3-Dimensional Spheroids of Adipose-Derived Stem Cells Promotes Achilles Tendon Healing in Rabbits by Enhancing the Proliferation of Tenocytes and Suppressing M1 Macrophages

Background: Tendons have limited regenerative potential, so healing of ruptured tendon tissue requires a prolonged period, and the prognosis is suboptimal. Although stem cell transplantation–based approaches show promise for accelerating tendon repair, the resultant therapeutic efficacy remains unsatisfactory. Hypothesis: The transplantation of stem cells preassembled as 3-dimensional spheroids achieves a superior therapeutic outcome compared with the transplantation of single-cell suspensions. Study Design: Controlled laboratory study. Methods: Adipose-derived stem cells (ADSCs) were assembled as spheroids using a methylcellulose hydrogel system. The secretome of ADSC suspensions or spheroids was collected and utilized to treat tenocytes and macrophages to evaluate their therapeutic potential and investigate the mechanisms underlying their effects. RNA sequencing was performed to investigate the global difference in gene expression between ADSC suspensions and spheroids in an in vitro inflammatory microenvironment. For the in vivo experiment, rabbits that underwent Achilles tendon transection, followed by stump suturing, were randomly assigned to 1 of 3 groups: intratendinous injection of saline, rabbit ADSCs as conventional single-cell suspensions, or preassembled ADSC spheroids. The tendons were harvested for biomechanical testing and histological analysis at 4 weeks postoperatively. Results: Our in vitro results demonstrated that the secretome of ADSCs assembled as spheroids exhibited enhanced modulatory activity in (1) tenocyte proliferation (P = .015) and migration (P = .001) by activating extracellular signal-regulated kinase (ERK) signaling and (2) the suppression of the secretion of interleukin-6 (P = .005) and interleukin-1α (P = .042) by M1 macrophages via the COX-2/PGE2/EP4 signaling axis. Gene expression profiling of cells exposed to an inflammatory milieu revealed significantly enriched terms that were associated with the immune response, cytokines, and tissue remodeling in preassembled ADSC spheroids. Ex vivo fluorescence imaging revealed that the engraftment efficiency of ADSCs in the form of spheroids was higher than that of ADSCs in single-cell suspensions (P = .003). Furthermore, the transplantation of ADSC spheroids showed superior therapeutic effects in promoting the healing of sutured stumps, as evidenced by improvements in the tensile strength (P = .019) and fiber alignment (P < .001) of the repaired tendons. Conclusion: The assembly of ADSCs as spheroids significantly advanced their potential to harness tenocytes and macrophages. As a proof of concept, this study clearly demonstrates the effectiveness of using ADSC spheroids to promote tendon regeneration. Clinical Relevance: The present study lays a foundation for future clinical applications of stem cell spheroid–based therapy for the management of tendon injuries.

Histone Trimethylations and HDAC5 Regulate Spheroid Subpopulation and Differentiation Signaling of Human Adipose-Derived Stem Cells.

Human adipose-derived stem cells (ASCs) have shown immense potential for regenerative medicine. Our previous work demonstrated that chitosan nano-deposited surfaces induce spheroid formation and differentiation of ASCs for treating sciatic nerve injuries. However, the underlying cell fate and differentiation mechanisms of ASC-derived spheroids remain unknown. Here, we investigate the epigenetic regulation and signaling coordination of these therapeutic spheroids. During spheroid formation, we observed significant increases in histone 3 trimethylation at lysine 4 (H3K4me3), lysine 9 (H3K9me3), and lysine 27 (H3K27me3), accompanied by increased histone deacetylase (HDAC) activities and decreased histone acetyltransferase activities. Additionally, HDAC5 translocated from the cytoplasm to the nucleus, along with increased nuclear HDAC5 activities. Utilizing single-cell RNA sequencing (scRNA-seq), we analyzed the chitosan-induced ASC spheroids and discovered distinct cluster subpopulations, cell fate trajectories, differentiation traits, and signaling networks using the 10x Genomics platform, R studio/language, and the Ingenuity Pathway Analysis (IPA) tool. Specific subpopulations were identified within the spheroids that corresponded to a transient reprogramming state (Cluster 6) and the endpoint cell state (Cluster 3). H3K4me3 and H3K9me3 were discovered as key epigenetic regulators by IPA to initiate stem cell differentiation in Cluster 6 cells, and confirmed by qPCR and their respective histone methyltransferase inhibitors: SNDX-5613 (a KMT2A inhibitor for H3K4me3) and SUVi (an SUV39H1 inhibitor for H3K9me3). Moreover, H3K9me3 and HDAC5 were involved in regulating downstream signaling and neuronal markers during differentiation in Cluster 3 cells. These findings emphasize the critical role of epigenetic regulation, particularly H3K4me3, H3K9me3, and HDAC5, in shaping stem cell fate and directing lineage-specific differentiation.

A Synergic Strategy: Adipose-Derived Stem Cell Spheroids Seeded on 3D-Printed PLA/CHA Scaffolds Implanted in a Bone Critical-Size Defect Model.

Bone critical-size defects and non-union fractures have no intrinsic capacity for self-healing. In this context, the emergence of bone engineering has allowed the development of functional alternatives. The aim of this study was to evaluate the capacity of ASC spheroids in bone regeneration using a synergic strategy with 3D-printed scaffolds made from poly (lactic acid) (PLA) and nanostructured hydroxyapatite doped with carbonate ions (CHA) in a rat model of cranial critical-size defect. In summary, a set of results suggests that ASC spheroidal constructs promoted bone regeneration. In vitro results showed that ASC spheroids were able to spread and interact with the 3D-printed scaffold, synthesizing crucial growth factors and cytokines for bone regeneration, such as VEGF. Histological results after 3 and 6 months of implantation showed the formation of new bone tissue in the PLA/CHA scaffolds that were seeded with ASC spheroids. In conclusion, the presence of ASC spheroids in the PLA/CHA 3D-printed scaffolds seems to successfully promote bone formation, which can be crucial for a significant clinical improvement in critical bone defect regeneration.

Functionally enhanced cell spheroids for stem cell therapy: Role of TIMP1 in the survival and therapeutic effectiveness of stem cell spheroids.

Stem cell therapy has emerged as a promising regenerative medicine strategy but is limited by poor cell survival, leading to low therapeutic outcomes. We developed cell spheroid therapeutics to overcome this limitation. We utilized solid-phase FGF2 to form functionally enhanced cell spheroid-adipose derived (FECS-Ad), a type of cell spheroid that preconditions cells with intrinsic hypoxia to increase the survival of transplanted cells. We demonstrated an increase in hypoxia-inducible factor 1-alpha (HIF-1α) levels in FECS-Ad, which led to the upregulation of tissue inhibitor of metalloproteinase 1 (TIMP1). TIMP1 enhanced the survival of FECS-Ad, presumably through the CD63/FAK/Akt/Bcl2 anti-apoptotic signaling pathway. Cell viability of transplanted FECS-Ad was reduced by TIMP1 knockdown in an in vitro collagen gel block and a mouse model of critical limb ischemia (CLI). TIMP1 knockdown in FECS-Ad inhibited angiogenesis and muscle regeneration induced by FECS-Ad transplanted into ischemic mouse tissue. Genetic overexpression of TIMP1 in FECS-Ad further promoted the survival and therapeutic efficacy of transplanted FECS-Ad. Collectively, we suggest that TIMP1 acts as a key survival factor to improve the survival of transplanted stem cell spheroids, which provides scientific evidence for enhanced therapeutic efficacy of stem cell spheroids, and FECS-Ad as a potential therapeutic agent to treat CLI. STATEMENT OF SIGNIFICANCE: We used FGF2-tethered substrate platform to form adipose-derived stem cell spheroids, as we named as functionally enhanced cell spheroid-adipose derived (FECS-Ad). In this paper, we showed that intrinsic hypoxia of spheroids upregulated expression of HIF-1α, which in turn upregulated expression of TIMP1. Our paper highlights TIMP1 as a key survival factor to improve survival of transplanted stem cell spheroids. We believe that our study has a very strong scientific impact as extending transplantation efficiency is essential for successful stem cell therapy.

Hybrid spheroid microscaffolds as modular tissue units to build macro-tissue assemblies for tissue engineering.

Since its inception, tissue engineering and regenerative medicine (TERM) has been relying on either scaffold-based or scaffold-free strategies. Recent reports outlined the possibility of a synergistic, convergence approach, referred to as the third TERM strategy, which could alleviate bottlenecks of the two previous options. This strategy requires the fabrication of highly porous microscaffolds, allowing to create single spheroids within each of them. The resulting tissue units can then be combined and used as modular building blocks for creating tissue constructs through a bottom-up self-assembly. Such strategy can have a significant impact for the future of TERM, but so far, no reports have assessed its feasibility in detail. This work reports a first systematic study, which includes a comparison of the in vitro behavior of tissue units based on adipose derived stem cell spheroids cultured within microscaffolds versus conventional spheroids. We first proved that the presence of the microscaffold neither impairs the cells 'ability to form spheroids nor impacts their viability. Importantly, the fusiogenic and the differentiation potential (i.e. chondrogenesis and osteogenesis), which are important features for cellularized building blocks to be used in TERM, are preserved when spheroids are cultured within microscaffolds. Significant benefits of microscaffold-based tissue units include the enhanced cell retention, the decreased compaction and the better control over the size observed when larger tissue constructs are formed through self-assembly. The proof of concept study presented here demonstrates the great potential offered by those microsize tissue units to be used as building blocks for directed tissue self-assembly. STATEMENT OF SIGNIFICANCE: One of the most exciting and recent advances in tissue engineering and regenerative medicine (TERM) is to combine together multiple micro-size cellularized units, which are able to self-assemble altogether to recreate larger tissue constructs. In this work, we produce such modules by forming single spheroids within highly porous microscaffolds, and study how this new microenvironment impacts on the spheroid's behavior and stemness potential. This work highlights as well that such novel route is enabled by two-photon polymerization, which is an additive manufacturing technique offering high spatial resolution down to 100 nm. These findings provide a first scientific evidence about the utilization of hybrid spheroid microscaffold-based tissue units with great perspective as a modular tool for TERM.

Three-dimensional adipose-derived stem cell spheroids exert potent therapeutic effects on rat femur osteochondral defects

BackgroundSpheroids can allow three-dimensional (3D) cell culture without scaffolds, potentially promoting the production of growth factors from adipose-derived stem cells (ADSCs). We hypothesized that ADSC spheroids exert more favourable effects on osteochondral defects than ADSCs in two-dimensional (2D) cultures. The purpose of this study was to compare the therapeutic effects of 2D and 3D cultures of ADSCs on osteochondral defects using animal models. MethodsRat femoral osteochondral defects were created. When creating osteochondral defects, phosphate‐buffered saline, 2D ADSCs, or ADSC spheroids as a 3D culture were administered on to the lesion. At 2, 4, 6, 8, 10 and 12 weeks post-surgery, knee tissues were harvested and evaluated via histological examination. The expression of genes related to growth factors and apoptosis were compared between 2D and 3D ADSCs. ResultsHistologically, the repair of osteochondral defects was significantly enhanced in 3D ADSCs than in 2D ADSCs in terms of the Wakitani score and cartilage repair rate. In 3D ADSCs, TGF-β1, VEGF, HGF and BMP-2 were significantly upregulated, while apoptosis was suppressed in the early phase. ConclusionThe therapeutic effects of 3D ADSC spheroids on osteochondral defects were more potent than those of 2D ADSCs. The upregulated expression of growth factors and suppression of apoptosis could contribute to promoting these therapeutic effects. Overall, ADSC spheroids can help treat osteochondral defects.

Innovative regenerative strategy for reconstructing breast defect: Gas-foamed gelatin methacryloyl scaffolds combined with human adipose-derived stem cell spheroids

The construction of vascularized tissue-engineered adipose tissue offers a promising alternative for breast defect repairs. However, the lack of a vascularized environment and inefficient adipose tissue differentiation hinder its application. Herein, an adipose regeneration strategy is proposed that integrates an innovative gas-foamed method (soil) and three-dimensional (3D) cell spheroids (seeds). The soil is optimized using a combination of gas-foaming and light-cured technology to generate foamed gelatin methacryloyl (f-GelMA), which provides a new strategy for the preparation of nontoxic porous hydrogels that significantly enhances the vascularization of the regenerated tissue. Seed cells were optimized to promote adipogenesis by replacing 2D monolayer adipose-derived stem cells (m-ADSC) with 3D ADSC spheroids (s-ADSC). The culture model based on f-GelMA and s-ADSC effectively promotes cell survival, migration, and adipogenic differentiation in vitro and significantly promotes the regeneration of vascularized adipose tissue in vivo. This study provides a solution for the regeneration of vascularized adipose tissue and establishes a general research model for the reconstruction of breast defects.

Adipose-derived stem cell spheroid-laden microbial transglutaminase cross-linked gelatin hydrogel for treating diabetic periodontal wounds and craniofacial defects

BackgroundDiabetes mellitus deteriorates the destruction and impairs the healing of periodontal wounds and craniofacial defects. This study is to evaluate the potential of self-assembled adipose-derived stem cell spheroids (ADsp) in microbial transglutaminase cross-linked gelatin hydrogel (mTG) for treating diabetic periodontal wounds and craniofacial defects.MethodsHuman adipose-derived stem cells (ADSCs) were isolated by lipoaspiration, pluripotent genes and trilineage differentiation were examined, and the maintenance of ADsp properties in mTG was verified. Oral mucosal wounds and calvarial osseous defects were created in diabetic rats. Gross observation, histologic evaluation, and immunohistochemistry for proliferating cells and keratinization were conducted in the mucosal wounds within 4–28 days. Micro-CT imaging, histologic evaluation, and immunohistochemistry for proliferating cells and osteogenic differentiation were conducted in the osseous defects at 7 and 28 days.ResultsADSCs expressed pluripotent genes and were capable of trilineage differentiation. ADsp retained morphology and stemness in mTG. In diabetic mucosal wounds, wound closure, epithelization, and keratinization were accelerated in those with ADsp and ADsp-mTG. In diabetic osseous defects, osteogenic differentiation markers were evidently expressed, cell proliferation was promoted from day 7, and bone formation was significantly promoted at day 28 in those with osteogenically pretreated ADsp-mTG.ConclusionsADsp-mTG accelerated diabetic oral mucosal wound healing, and osteogenically pretreated ADsp-mTG promoted diabetic osseous defect regeneration, proving that ADsp-mTG facilitated diabetic periodontal wound healing and craniofacial osseous defect regeneration.

Low-fouling granular hydrogel for efficient preparation and delivery of stem cell spheroids towards wound treatment

Stem cell spheroids possess higher viability and up-regulated paracrine function, showing advanced curative effect. However, the barrier of efficient spheroids preparation and application limits spheroids application in clinical. The present study developed an “all-in-one” porous granular hydrogel to not only produce numerous stem cell spheroids, but also apply the spheroids conveniently for wound treatment. Poly (sulfobetaine methacrylate) (PSBMA)-based microgels that cross-linked with disulfide bonds assembled, and further cross-linked by in-situ co-polymerized poly (N-isopropylacrylamide-co-sulfobetaine methacrylate) (P(NIPAM-co-SBMA)) to prepare porous composite granular hydrogel with bulk, shear-thinning, self-healing, hundred micron pores and low-fouling feature. Adipose-derived stem cells (ASCs) seeded into the porous composite granular hydrogel formed numerous spheroids inside the hundred micron pores. The porous composite granular hydrogel carrying produced ASC spheroids were spread onto the wound like creams. Then, PSBMA-based microgels dissolved quickly and spontaneously, forming extensive pores with the size less than 10 μm, which ensured the effective release of growth factors produced by stem cell spheroids into the wound. In vivo evaluation confirmed that ASC spheroids up-regulated the secretion of anti-inflammatory factors and reparative growth factors, effectively inhibited the local inflammatory response of wounds in the early stage of wound, thus accelerating wound healing.

MiRNA induced 3D bioprinted-heterotypic osteochondral interface

The engineering of osteochondral interfaces remains a challenge. MicroRNAs (miRs) have emerged as significant tools to regulate the differentiation and proliferation of osteogenic and chondrogenic formation in the human musculoskeletal system. Here, we describe a novel approach to osteochondral reconstruction based on the three-dimensional (3D) bioprinting of miR-transfected adipose-derived stem cell (ADSC) spheroids to produce a heterotypic interface that addresses the intrinsic limitations of the traditional approach to inducing zonal differentiation via the use of diffusible cytokines. We evaluated the delivery of miR-148b for osteogenic differentiation and the codelivery of miR-140 and miR-21 for the chondrogenic differentiation of ADSC spheroids. Our results demonstrated that miR-transfected ADSC spheroids exhibited upregulated expression of osteogenic and chondrogenic differentiation related gene and protein markers, and enhanced mineralization and cell proliferation compared to spheroids differentiated using a commercially-available differentiation medium. Upon confirmation of the osteogenic and chondrogenic potential of miR-transfected ADSC spheroids, using aspiration-assisted bioprinting, these spheroids were 3D bioprinted into a dual-layer heterotypic osteochondral interface with a stratified arrangement of distinct osteogenic and chondrogenic zones. The proposed approach holds great promise for the biofabrication of stratified tissues, not only for the osteochondral interfaces presented in this work, but also for other composite tissues and tissue interfaces, such as, but not limited to, the bone-tendon-muscle interface and craniofacial tissues.

Stem cell spheroids production for wound healing with a reversible porous hydrogel

Adipose derived stem cell (ASC) spheroids show enhanced cellular viability and paracrine function to promote tissue regeneration and cell therapy effect. However, efficient preparation of numerous ASC spheroids, as well as convenient application on skin wound remains a challenge. The present study explored a new function of frequently-used polymer, Poly (N-isopropylacrylamide) (PNIPAM), developing a simple but efficient method based on PNIPAM to produce numerous ASC spheroids and apply them towards wound healing. PNIPAM-based porous hydrogel that crosslinked with disulfide bonds was fabricated, showing pore size of 300 μm at 37 °C. ASCs seeded into porous hydrogel spontaneously aggregated inside the inner pores to form a large number of spheroids. Higher cell seeding density could produce larger size of spheroids, which showed up-regulated paracrine secretion. After spheroids production, the porous hydrogel became a solution within 25 min after the addition of glutathione at 15 °C. The PNIPAM-based polymer solution carrying the produced ASC spheroids gelled again within 80 s at 33 °C and could tightly attach on skin. The in vivo wound healing evaluation illustrated that ASC spheroids promoted M2 polarization of macrophages, and effectively inhibited the local inflammatory response of wounds, thus accelerating wound healing. Thus, for one thing, this method was expected to realize the industrialized manufacturing of a large number of stem cell spheroids. For another, the spheroids produced by the present method could be easily collected and applied for biomedical engineering.

A Simple and Efficient Strategy for Preparing a Cell-Spheroid-Based Bioink.

Cell spheroids are a promising bioprinting building block that can mimic several physiological conditions in embryonic development. However, it remains challenging to efficiently prepare cell-spheroid-based bioink (Sph-bioink) with favorable printability and spheroid fusion ability. In this work, a poly(N-isopropylacrylamide) (PNIPAAm)-based porous hydrogel is developed as an "all-in-one" platform for Sph-bioink preparation. On the one hand, the nonadhesive porous structure in hydrogels is an effective tool for fabricating adipose-derived stem cell (ASC) spheroids in high yield, and the hydrogel itself also serves as a "carrier" for conveniently transferring cell spheroids to the bioprinter. On the other hand, the integration of redox/thermo-responsiveness allows the hydrogel to shift from a solid spheroid-making tool to an extrudable bioprinting medium that is sensitive to temperature. These features enabled a simple procedure for preparing Sph-bioink, in which the cell spheroids were densely packed to retain fusion capability. The present study also demonstrates that ASC spheroids formed in hydrogels have good biological preservation and superior chondrogenic differentiation, and verified the feasibility of using Sph-bioink to build custom-shaped mature cartilage. In conclusion, this strategy provides a simple, efficient, and standardized approach for Sph-bioink preparation, making it possible to produce tissue-engineered constructs with accelerated maturation and functionalization.

Bone Regeneration Using Autologous Adipose-Derived Stem Cell Spheroid Complex

Bone defects require reconstruction using various biomaterials or non-biological materials. Stem cell spheroids can be used for scaffold-free approaches for osteogenesis. We set up a culture method for creating an optimal osteogenic adipose-derived stem cell (ADSC) spheroid complex by measuring the expression of protein in a sequential series of culture media. After culturing ADSC spheroids for 24 hours in DMEM, the spheroids were cultured in ascorbic acid-containing medium for five days followed by osteoblast differentiation medium. One day after exchanging to osteoblast differentiation medium, spheroids were collected and cultured for four days to obtain a spheroid complex. Each culture period was determined by analyzing the expression of collagen type I, alkaline phosphatase and integrin α5 to maximize the activity of ADSC spheroids. The expression of collagen type I increased significantly in ascorbic acid-containing medium (p &lt; 0.05) compared with control medium on day five, suggesting that culturing spheroids in ascorbic acid increases collagen synthesis. RNA was extracted from ADSC spheroids after 1, 3, 5, and 7 days in each medium and RT-PCR was performed to measure integrin α5 expression. The expression was transiently high on the first day of osteoblast differentiation culture and then gradually decreased. Osteoblast differentiation medium enhanced cell adhesion in spheroids. An in vivo study confirmed the osteogenic potential of the ADSC spheroid complex created by the established protocol. The ADSC spheroid complex stimulated bone regeneration and will be applied to the treatment of large bone defects.

Solid multifunctional granular bioink for constructing chondroid basing on stem cell spheroids and chondrocytes

Stem cell spheroids are advanced building blocks to produce chondroid. However, the multi-step operations including spheroids preparation, collection and transfer, the following 3D printing and shaping limit their application in 3D printing. The present study fabricates an ‘ALL-IN-ONE’ bioink based on granular hydrogel to not only produce adipose derived stem cell (ASC) spheroids, but also realize the further combination of chondrocytes and the subsequent 3D printing. Microgels (6–10 μm) grafted with β-cyclodextrin (β-CD) (MGβ-CD) were assembled and crosslinked by in-situ polymerized poly (N-isopropylacrylamide) (PNIPAm) to form bulk granular hydrogel. The host-guest action between β-CD of microgels and PNIPAm endows the hydrogel with stable, shear-thinning and self-healing properties. After creating caves, ASCs aggregate spontaneously to form numerous spheroids with diameter of 100–200 μm inside the hydrogel. The thermosensitive porous granular hydrogel exhibits volume change under different temperature, realizing further adsorbing chondrocytes. Then, the granular hydrogel carrying ASC spheroids and chondrocytes is extruded by 3D printer at room temperature to form a tube, which can shrink at cell culture temperature to enhance the resolution. The subsequent ASC spheroids/chondrocytes co-culture forms cartilage-like tissue at 21 d in vitro, which further matures subcutaneously in vivo, indicating the application potential of the fully synthetic granular hydrogel ink toward organoid culture.

Injection laryngoplasty of human adipose-derived stem cell spheroids with hyaluronic acid-based hydrogel improves the morphological and functional characteristics of geriatric larynx

AimAs the geriatric population increased, the need of treatment for laryngeal atrophy and dysfunction increased. This study was performed to evaluate the effects of injection of human adipose-derived stem cell (hASC) spheroid-loaded catechol-conjugated hyaluronic acid (HA-CA) hydrogel on therapeutic rejuvenation of the geriatric larynx.MethodsStem cell spheroids with hyaluronic acid-based hydrogel were injected into the laryngeal muscles of 18-month-old Sprague–Dawley rats. The effects of hASC spheroids were examined in the following four groups: SHAM, injected with PBS; GEL, injected with HA-CA hydrogel; MONO, injected with single hASCs in HA-CA hydrogel; and SP, injected with hASCs spheroids in HA-CA hydrogel. The rejuvenation efficacy in geriatric laryngeal muscle tissues at 12 weeks postinjection was evaluated and compared by histology, immunofluorescence staining, and functionality analysis.ResultsTotal myofiber cross-sectional area and myofiber number/density, evaluated by detection of myosin heavy chain with antibodies against laminin and fast myosin heavy chain, were significantly higher in the SP group than in the other groups. The lamina propria of the larynx was evaluated by alcian blue staining, which showed that the HA was increased significantly in the SP group compared to the other groups. In functional analysis, the glottal gap area was significantly reduced in the SP group compared to the other groups. The phase difference in the vocal fold during vibration was also smaller in the SP group than in the other groups, but the difference did not reach statistical significance.ConclusionInjection of hASC spheroids with hyaluronic acid-based hydrogel improves the morphological and functional characteristics of geriatric larynx.Graphical abstract

Large-Scale, Automated Production of Adipose-Derived Stem Cell Spheroids for 3D Bioprinting

Large-Scale, Automated Production of Adipose-Derived Stem Cell Spheroids for 3D Bioprinting

Large-Scale, Automated Production of Adipose-Derived Stem Cell Spheroids for 3D Bioprinting.

Adipose-derived stromal/stem cells (ASCs) are a subpopulation of cells found in the stromal vascular fraction of human subcutaneous adipose tissue recognized as a classical source of mesenchymal stromal/stem cells. Many studies have been published with ASCs for scaffold-based tissue engineering approaches, which mainly explored the behavior of these cells after their seeding on bioactive scaffolds. However, scaffold-free approaches are emerging to engineer tissues in vitro and in vivo, mainly by using spheroids, to overcome the limitations of scaffold-based approaches. Spheroids are 3D microtissues formed by the self-assembly process. They can better mimic the architecture and microenvironment of native tissues, mainly due to the magnification of cell-to-cell and cell-to-extracellular matrix interactions. Recently, spheroids are mainly being explored as disease models, drug screening studies, and building blocks for 3D bioprinting. However, for 3D bioprinting approaches, numerous spheroids, homogeneous in size and shape, are necessary to biofabricate complex tissue and organ models. In addition, when spheroids are produced automatically, there is little chance for microbiological contamination, increasing the reproducibility of the method. The large-scale production of spheroids is considered the first mandatory step for developing a biofabrication line, which continues in the 3D bioprinting process and finishes in the full maturation of the tissue construct in bioreactors. However, the number of studies that explored the large-scale ASC spheroid production are still scarce, together with the number of studies that used ASC spheroids as building blocks for 3D bioprinting. Therefore, this article aims to show the large-scale production of ASC spheroids using a non-adhesive micromolded hydrogel technique spreading ASC spheroids as building blocks for 3D bioprinting approaches.

3D-cultured small size adipose-derived stem cell spheroids promote bone regeneration in the critical-sized bone defect rat model

Adipose-derived stem cells (ADSCs), due to their regenerative ability, have beneficial effects on bone and cartilage defects. In addition, spheroid formation of ADSCs obtained using three-dimensional (3D) culture accelerates the regenerative ability of ADSCs. The study investigated the regenerative effect of 3D-cultured small size ADSC spheroids without a scaffold in rats with defects in the critical-sized calvarial bone. ADSC-single cells, ADSC-spheroids, or PBS (as control) were implanted in rats, and radiological and histological assessment of bone regeneration was performed. Bone defects were significantly regenerated in the ADSC-spheroid group compared to that in the control group. ADSC-spheroids also showed the most significant bone regeneration in histological assessment. Immunohistochemistry assessment showed that ADSC-spheroids could survive 12 weeks after cell implantation. In vitro, cell apoptosis in ADSC-spheroids was significantly suppressed compared to that in ADSC-single cells. In addition, gene expression related to bone morphogenesis, angiogenesis, and stemness in ADSC-spheroids was elevated. The scaffold-free 3D-cultured small ADSC-spheroids survived in in vitro and in vivo conditions and promoted bone regeneration. Therefore, injectable small size ADSC-spheroids are a novel and less-invasive therapeutic option for treating bone defects.

Adipose-derived stem cell spheroids are superior to single-cell suspensions to improve fat autograft long-term survival.

Autologous fat transplantation is a widely used procedure for surgical reconstruction of tissues. The resorption rate of this transplantation remains high and unpredictable, reinforcing the need of adjuvant treatments that increase the long‐term stability of grafts. Adipose‐derived stem cells (ASC) introduced as single cells in fat has been shown clinically to reduce the resorption of fat grafts. On the other hand, the formulation of ASC into cell spheroids results in the enhancement of their regenerative potential. In this study, we developed a novel method to produce highly homogeneous ASC spheroids and characterized their features and efficacy on fat transplantation. Spheroids conserved ASC markers and multipotency. A regenerative gene expression profile was maintained, and genes linked to autophagy were upregulated whereas proliferation was decreased. Their secreted proteome was enriched in comparison with single‐cell ASC suspension. Addition of spheroids to fat graft in an animal model of transplantation resulted in a better graft long‐term stability when compared to single ASC suspension. In conclusion, we provide a novel method to manufacture homogenous ASC spheroids. These ASC spheroids are superior to ASC in single‐cell suspension to improve the stability of fat transplants, reinforcing their potential in reconstructive surgery.

Spatially arranged encapsulation of stem cell spheroids within hydrogels for the regulation of spheroid fusion and cell migration

Mesenchymal stem cell spheroids have been encapsulated in hydrogels for various applications because spheroids demonstrate higher cell activity than individual cells in suspension. However, there is limited information on the effect of distance between spheroids (inter-spheroid distance) on fusion or migration in a hydrogel. In this study, we developed temperature-responsive hydrogels with surface microwell patterns to culture adipose-derived stem cell (ASC) spheroids and deliver them into a Matrigel for the investigation of the effect of inter-spheroid distance on spheroid behavior. The ASC spheroids were encapsulated successfully in a Matrigel, denoted as sandwich culture, with a specific inter-spheroid distance ranging from 100 to 400 µm. Interestingly, ASCs migrated from the host spheroid and formed a bridge-like structure between spheroids, denoted as a cellular bridge, only when the inter-spheroid distance was 200 µm. Thus, we performed a sandwich culture of human umbilical vein endothelial cells (HUVECs) and ASCs in co-cultured spheroids in the Matrigel to create a homogeneous endothelial cell network in the hydrogel. The HUVECs sprouted through the ASC cellular bridge and directly interacted with the adjacent spheroid when the inter-spheroid distance was 200 µm. Similar results were obtained from an in vivo study. Thus, our study suggests the appropriate inter-spheroid distance for effective spheroid encapsulation in a hydrogel. Statement of significanceRecently, spheroid-based 3D tissue culture techniques such as spheroid encapsulation or 3D printing are being intensively investigated for various purposes. However, there is limited research regarding the effect of the inter-spheroid distance on spheroid communication. Here, we demonstrate a spatially arranged spheroid encapsulation method within a Matrigel by using a temperature-responsive hydrogel. Human adipose-derived stem cell spheroids are encapsulated with a precisely controlled inter-spheroid distance from 100 to 400 µm and show different tendencies in cell migration and spheroid fusion. Our results suggest that the inter-spheroid distance affects spheroid communication, and thus, the inter-spheroid distance needs to be considered carefully according to the purpose.