Adipose-derived Extracellular Matrix Research Articles

Adipose tissue reconstruction facilitated with low immunogenicity decellularized adipose tissue scaffolds.

There is currently an urgent need to develop engineered scaffolds to support new adipose tissue formation and facilitate long-term maintenance of function and defect repair to further generate prospective bioactive filler materials capable of fulfilling surgical needs. Herein, adipose regeneration methods were optimized and decellularized adipose tissue (DAT) scaffolds with good biocompatibility were fabricated. Adipose-like tissues were reconstructed using the DAT and 3T3-L1 preadipocytes, which have certain differentiation potential, and the regenerative effects of the engineered adipose tissuesin vitroandin vivowere explored. The method improved the efficiency of adipose removal from tissues, and significantly shortened the time for degreasing. Thus, the DAT not only provided a suitable space for cell growth but also promoted the proliferation, migration, and differentiation of preadipocytes within it. Following implantation of the constructed adipose tissuesin vivo, the DAT showed gradual degradation and integration with surrounding tissues, accompanied by the generation of new adipose tissue analogs. Overall, the combination of adipose-derived extracellular matrix and preadipocytes for adipose tissue reconstruction will be of benefit in the artificial construction of biomimetic implant structures for adipose tissue reconstruction, providing a practical guideline for the initial integration of adipose tissue engineering into clinical medicine.

Intraoperative bioprinting of human adipose-derived stem cells and extra-cellular matrix induces hair follicle-like downgrowths and adipose tissue formation during full-thickness craniomaxillofacial skin reconstruction

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2 % or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo. Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

Human adipose ECM alleviates radiation-induced skin fibrosis via endothelial cell-mediated M2 macrophage polarization

Radiation therapy can lead to late radiation-induced skin fibrosis (RISF), causing movement restriction, pain, and organ dysfunction. This study evaluated adipose-derived extracellular matrix (Ad-ECM) as a mitigator of RISF. Female C57BL/6J mice that were irradiated developed fibrosis, which was mitigated by a single local Ad-ECM injection, improving limb movement and reducing epithelium thickness and collagen deposition. Ad-ECM treatment resulted in decreased expression of pro-inflammatory and fibrotic genes, and upregulation of anti-inflammatory cytokines, promoting M2 macrophage polarization. Co-culture of irradiated human fibroblasts with Ad-ECM down-modulated fibrotic gene expression and enhanced bone marrow cell migration. Ad-ECM treatment also increased interleukin (IL)-4, IL-5, and IL-15 expression in endothelial cells, stimulating M2 macrophage polarization and alleviating RISF. Prophylactic use of Ad-ECM showed effectiveness in mitigation. This study suggests Ad-ECM's potential in treating chronic-stage fibrosis.

Combined Use of Autologous Sustained-Release Scaffold of Adipokines and Acellular Adipose Matrix to Construct Vascularized Adipose Tissue.

Adipose tissue engineering plays a key role in the reconstruction of soft-tissue defects. The acellular adipose matrix (AAM) is a promising biomaterial for the construction of engineered adipose tissue. However, AAM lacks sufficient adipoinduction potency because of the abundant loss of matrix-bound adipokines during decellularization. An adipose-derived extracellular matrix collagen scaffold, "adipose collagen fragment" (ACF), was prepared using a novel mechanical method that provides sustained release of adipokines. Here, the authors used label-free proteomics methods to detect the protein components in AAM and ACF. In vivo, ACF was incorporated into AAM or acellular dermal matrix and implanted into nude mice to evaluate adipogenesis. Neoadipocytes, neovessels, and corresponding gene expression were evaluated. The effects of ACF on adipogenic differentiation of human adipose-derived stem cells and tube formation by human umbilical vein endothelial cells were tested in vitro. Proteomics analysis showed that ACF contains diverse adipogenic and angiogenic proteins. ACF can release diverse adipokines and induce highly vascularized, mature adipose tissue in AAM, and even in nonadipogenic acellular dermal matrix. Higher expression of adipogenic markers peroxisome proliferator-activated receptor gamma and CCAAT/enhancer-binding protein alpha and greater numbers of tubule structures were observed in ACF-treated groups in vitro. The combination of ACF and AAM could serve as a novel and promising strategy to construct mature, vascularized adipose tissue for soft-tissue reconstruction. The combined use of AAM and ACF has been proven to induce a highly vascularized, mature, engineered adipose tissue in the nude mouse model, which may serve as a promising strategy for soft-tissue reconstruction.

Interfacing reduced graphene oxide with an adipose-derived extracellular matrix as a regulating milieu for neural tissue engineering.

Enthralling evidence of the potential of graphene-based materials for neural tissue engineering is motivating the development of scaffolds using various structures related to graphene such as graphene oxide (GO) or its reduced form. Here, we investigated a strategy based on reduced graphene oxide (rGO) combined with a decellularized extracellular matrix from adipose tissue (adECM), which is still unexplored for neural repair and regeneration. Scaffolds containing up to 50wt% rGO relative to adECM were prepared by thermally induced phase separation assisted by carbodiimide (EDC) crosslinking. Using partially reduced GO enables fine-tuning of the structural interaction between rGO and adECM. As the concentration of rGO increased, non-covalent bonding gradually prevailed over EDC-induced covalent conjugation with the adECM. Edge-to-edge aggregation of rGO favours adECM to act as a biomolecular physical crosslinker to rGO, leading to the softening of the scaffolds. The unique biochemistry of adECM allows neural stem cells to adhere and grow. Importantly, high rGO concentrations directly control cell fate by inducing the differentiation of both NE-4C cells and embryonic neural progenitor cells into neurons. Furthermore, primary astrocyte fate is also modulated as increasing rGO boosts the expression of reactivity markers while unaltering the expression of scar-forming ones.

Additively manufactured macroporous chambers facilitate large volume soft tissue regeneration from adipose-derived extracellular matrix

Breast tissue engineering is a promising alternative intervention for breast reconstruction. Due to their low immunogenicity and well-preserved adipogenic microenvironment, decellularized adipose tissue (DAT) can potentially regenerate adipose tissue in vivo. However, the volume of adipose tissue regenerated from DAT can hardly satisfy the demand for breast reconstruction. Tissue engineering chamber (TEC) is an effective technique for generation of large adipose tissue volumes. However, TEC applications necessitate reoperation to remove non-degradable plastic chambers and harvest autologous tissue flaps, which prolongs the operation time and causes potential damage to donor sites. We improved the TEC strategy by combining bioresorbable polycaprolactone (PCL) chambers and decellularized adipose tissues (DAT). A miniaturized porous PCL chamber was fabricated based on scaling differences between human and rabbit chests, and basic fibroblast growth factor (bFGF)-loaded DAT successfully prepared. In rabbit models, a highly vascularized adipose tissue that nearly filled up the PCL chamber (5 mL) was generated de novo from 0.5 mL bFGF-loaded DAT. The newly formed tissue had significantly high expressions of adipogenic genes, compared to the endogenous adipose tissue. The concept described here can be exploited for breast tissue engineering. Statement of significanceDecellularized adipose tissue (DAT), which provides infiltrated cells adipogenic microenvironment, can potentially regenerate adipose tissue in vivo. Nevertheless, the volume of regenerated adipose tissue is insufficient to repair large sized tissue defect. Tissue engineering chamber (TEC) could provide a protective space for in situ regeneration of large volume tissue. Herein, a new strategy by combining biodegradable polycaprolactone chambers and basic fibroblast growth factor-loaded decellularized adipose tissue is proposed. In rabbit model, newly formed adipose tissue regenerated from DAT successfully filled the dome shaped chamber with ten folds higher volume than DAT, which is proportionally similar to women breast. This work highlighted the importance of adipogenic microenvironment and protective space for adipose tissue regeneration.

An immunologically active, adipose-derived extracellular matrix biomaterial for soft tissue reconstruction: concept to clinical trial

Soft tissue reconstruction remains an intractable clinical challenge as current surgical options and synthetic implants may produce inadequate outcomes. Soft tissue deficits may be surgically reconstructed using autologous adipose tissue, but these procedures can lead to donor site morbidity, require multiple procedures, and have highly variable outcomes. To address this clinical need, we developed an “off-the-shelf” adipose extracellular matrix (ECM) biomaterial from allograft human tissue (Acellular Adipose Tissue, AAT). We applied physical and chemical processing methods to remove lipids and create an injectable matrix that mimicked the properties of lipoaspirate. Biological activity was assessed using cell migration and adipogenesis assays. Characterization of regenerative immune properties in a murine muscle injury model revealed that allograft and xenograft AAT induced pro-regenerative CD4+ T cells and macrophages with xenograft AAT additionally attracting eosinophils secreting interleukin 4 (Il4). In immunocompromised mice, AAT injections retained similar volumes as human fat grafts but lacked cysts and calcifications seen in the fat grafts. The combination of AAT with human adipose-derived stem cells (ASCs) resulted in lower implant volumes. However, tissue remodeling and adipogenesis increased significantly in combination with ASCs. Larger injected volumes of porcine-derived AAT demonstrated biocompatibility and greater retention when applied allogeneicly in Yorkshire cross pigs. AAT was implanted in healthy volunteers in abdominal tissue that was later removed by elective procedures. AAT implants were well tolerated in all human subjects. Implants removed between 1 and 18 weeks demonstrated increasing cellular infiltration and immune populations, suggesting continued tissue remodeling and the potential for long-term tissue replacement.

Additive Manufactured Macroporous Chambers Facilitate the Regeneration of Large Volume Soft Tissue from Adipose-Derived Extracellular Matrix

Additive Manufactured Macroporous Chambers Facilitate the Regeneration of Large Volume Soft Tissue from Adipose-Derived Extracellular Matrix

Adipose Collagen Fragment: A Novel Adipose-Derived Extracellular Matrix Concentrate for Skin Filling.

Skin filler is an option for treating skin aging and wrinkles; however, currently used fillers are limited by poor biocompatibility, rapid degradation, and possible hypersensitivity reactions. Autologous adipose tissue-derived products have been recognized as promising options for skin rejuvenation. This study aimed to develop a novel adipose-derived product for skin filling. Adipose collagen fragment (ACF) was prepared through pulverization, filtration, and centrifugation. The macrography, structure, types of collagen, and cell viability of ACF were evaluated by immunostaining, western blotting, and cell culture assays. ACF, nanofat, and phosphate-buffered saline (9 spots/side, 0.01 mL/spot) were intradermally injected in the dorsal skin of 36 female BALB/c nude mice; the skin filling capacity and the collagen remodeling process were then investigated. Twenty-one female patients with fine rhytides in the infraorbital areas were enrolled and received clinical applications of ACF treatment. Therapeutic effects and patients' satisfaction scores were recorded. The mean [standard deviation] yield of ACF from 50 mL of Coleman fat was 4.91 [0.25] mL. ACF contained nonviable cells and high levels of collagen I, collagen IV, and laminin. Fibroblasts and procollagen significantly increased in ACF and ACF-treated dermis (P < 0.05). Overall, 85.7% of patients were satisfied with the therapy results, and no infections, injection site nodules, or other unwanted side effects were observed. ACF significantly improved dermal thickness and collagen synthesis and may serve as a potential autologous skin filler.

Hybrid adipose graft materials synthesized from chemically modified adipose extracellular matrix.

Decellularized extracellular matrix (ECM) from tissues is a promising biomaterial that can provide a complex 3D microenvironment capable of modulating cell response and tissue regeneration. In this study, we have integrated the decellularized thiolated adipose-derived ECM, at different concentrations, with polyethylene glycol (PEG) using Michael addition between thiol and acrylate moieties. The potential for this material to support adipogenic differentiation of human adipose-derived stem cells was evaluated by encapsulating cells in hydrogels with increasing concentrations of chemically modified ECM (mECM). Our results demonstrated a positive correlation between the ECM content in the hydrogels and cell proliferation, adipogenic marker expression, and lipid formation and accumulation. Furthermore, we have shown host cell infiltration and enhanced adipogenesis in vivo after implantation. These findings support the graft as a potential alternative for adipose tissue regeneration.

Improving In Vitro Cartilage Generation by Co-Culturing Adipose-Derived Stem Cells and Chondrocytes on an Allograft Adipose Matrix Framework.

Microtia is an inherited condition that results in varying degrees of external ear deformities; the most extreme form is anotia. Effective surgical reconstruction techniques have been developed. However, these usually require multistage procedures and have other inherent disadvantages. Tissue engineering technologies offer new approaches in the field of external ear reconstruction. In this setting, chondrocytes are cultured in the laboratory with the aim of creating bioengineered cartilage matrices. However, cartilage engineering has many challenges, including difficulty in culturing sufficient chondrocytes. To overcome these hurdles, the authors propose a novel model of cartilage engineering that involves co-culturing chondrocytes and adipose-derived stem cells on an allograft adipose-derived extracellular matrix scaffold. Auricular chondrocytes from porcine ear were characterized. Adipose-derived stem cells were isolated and expanded from human lipoaspirate. Then, the auricular chondrocytes were cultured on the allograft adipose matrix either alone or with the adipose-derived stem cells at different ratios and examined histologically. Cartilage induction was most prominent when the cells were co-cultured on the allograft adipose matrix at a ratio of 1:9 (auricular chondrocyte-to-adipose-derived stem cell ratio). Furthermore, because of the xenogeneic nature of the experiment, the authors were able to determine that the adipose-derived stem cells contributed to chondrogenesis by means of a paracrine stimulation of the chondrocytes. In this situation, adipose-derived stem cells provide sufficient support to induce the formation of cartilage when the number of auricular chondrocytes available is limited. This novel model of cartilage engineering provides a setting for using the patient's own chondrocytes and adipose tissue to create a customized ear framework that could be further used for surgical reconstruction.

Culture on Tissue-Specific Coatings Derived from α-Amylase-Digested Decellularized Adipose Tissue Enhances the Proliferation and Adipogenic Differentiation of Human Adipose-Derived Stromal Cells.

While extracellular matrix (ECM)-derived coatings have the potential to direct the response of cell populations in culture, there is a need to investigate the effects of ECM sourcing and processing on substrate bioactivity. To develop improved cell culture models for studying adipogenesis, the current study examines the proliferation and adipogenic differentiation of human adipose-derived stem/stromal cells (ASCs) on a range of ECM-derived coatings. Human decellularized adipose tissue (DAT) and commercially available bovine tendon collagen (COL) are digested with α-amylase or pepsin to prepare the coatings. Physical characterization demonstrates that α-amylase digestion generates softer, thicker, and more stable coatings, with a fibrous tissue-like ultrastructure that is lost in the pepsin-digested thin films. ASCs cultured on the α-amylase-digested ECM have a more spindle-shaped morphology, and proliferation is significantly enhanced on the α-amylase-digested DAT coatings. Further, the α-amylase-digested DAT provides a more pro-adipogenic microenvironment, based on higher levels of adipogenic gene expression, glycerol-3-phosphate dehydrogenase (GPDH) enzyme activity, and perilipin staining. Overall, this study supports α-amylase digestion as a new approach for generating bioactive ECM-derived coatings, and demonstrates tissue-specific bioactivity using adipose-derived ECM to enhance ASC proliferation and adipogenic differentiation.

Preparation and Characterization of Human Adipose Tissue-Derived Extracellular Matrix, Growth Factors, and Stem Cells: A Concise Review.

Human adipose tissue is routinely discarded as medical waste. However, this tissue may have valuable clinical applications since methods have been devised to effectively isolate adipose-derived extracellular matrix (ECM), growth factors (GFs), and stem cells. In this review, we analyze the literature that devised these methods and then suggest an optimal method based on their characterization results. Methods that we analyze in this article include: extraction of adipose tissue, decellularization, confirmation of decellularization, identification of residual active ingredients (ECM, GFs, and cells), removal of immunogens, and comparing structural/physiological/biochemical characteristics of active ingredients. Human adipose ECMs are composed of collagen type I-VII, laminin, fibronectin, elastin, and glycosaminoglycan (GAG). GFs immobilized in GAG include basic fibroblast growth factor (bFGF), transforming growth factor beta 1(TGF-b1), insulin like growth factor 1 (IGF-1), vascular endothelial growth factor (VEGF), platelet-derived growth factor (PDGF), BMP4 (bone morphogenetic protein 4), nerve growth factor (NGF), hepatocyte growth factor (HGF), and epithermal growth factor (EGF). Stem cells in the stromal-vascular fraction display mesenchymal markers, self-renewal gene expression, and multi-differentiation potential. Depending on the preparation method, the volume, biological activity, and physical properties of ECM, GFs, and adipose tissue-derived cells can vary. Thus, the optimal preparation method is dependent on the intended application of the adipose tissue-derived products.

Hybrid Synthetic-Biological Hydrogel System for Adipose Tissue Regeneration.

Hydrogels are promising scaffolds for adipose tissue regeneration. Currently, the incorporation of bioactive molecules in hydrogel system is used, which can increase the cell proliferation rate or improve adipogenic differentiation performance of stromal stem cells but often suffers from high expense or cytotoxicity because of light/thermal curing used for polymerization. In this study, decellularized adipose tissue is incorporated, at varying concentrations, with a thiol-acrylate fraction that is then polymerized to produce hydrogels via a Michael addition reaction. The results reveal that the major component of isolated adipose-derived extracellular matrix (ECM) is Collagen I. Mechanical properties of ECM polyethylene glycol (PEG) are not negatively affected by the incorporation of ECM. Additionally, human adipose-derived stem cells (hASCs) are encapsulated in ECM PEG hydrogel with ECM concentrations varying from 0% to 1%. The results indicate that hASCs maintained the highest viability and proliferation rate in 1% ECM PEG hydrogel with most lipids formation when cultured in adipogenic conditions. Furthermore, more adipose regeneration is observed in 1% ECM group with in vivo study by Day 14 compared to other ECM PEG hydrogels with lower ECM content. Taken together, these findings suggest the ECM PEG hydrogel is a promising substitute for adipose tissue regeneration applications.

Preparation and Characterization of a Chitosan/Gelatin/Extracellular Matrix Scaffold and Its Application in Tissue Engineering.

Previous studies have demonstrated that extracellular matrix (ECM) can be used in tissue engineering due to its bioactivity. However, adipose-derived ECM (A-dECM) has never been applied in bone tissue engineering, and it is unknown whether it would be beneficial to the growth of bone marrow mesenchymal stem cells (BMSCs). In this study, we produced chitosan/gelatin/A-dECM (C/G/A-dECM) scaffolds via lyophilization and crosslinking; chitosan/gelatin (C/G) scaffolds were used as controls. For the C/G/A-dECM scaffolds, the average pore size was 285.93 ± 85.39 μm; the average porosity was 90.62 ± 3.65%; the average compressive modulus was 0.87 ± 0.05 kPa; and the average water uptake ratio was 13.73 ± 1.16. In vitro, A-dECM scaffolds could promote the attachment and proliferation of BMSCs. In the same osteogenic-inducing reagent, better osteogenic differentiation could be observed for the C/G/A-dECM scaffolds than for the C/G scaffolds. Thus, we conclude that A-dECM is a promising material and that C/G/A-dECM scaffolds are a candidate for bone tissue engineering.

Human Adipose Tissue Derived Extracellular Matrix and Methylcellulose Hydrogels Augments and Regenerates the Paralyzed Vocal Fold.

Vocal fold paralysis results from various etiologies and can induce voice changes, swallowing complications, and issues with aspiration. Vocal fold paralysis is typically managed using injection laryngoplasty with fat or synthetic polymers. Injection with autologous fat has shown excellent biocompatibility. However, it has several disadvantages such as unpredictable resorption rate, morbidities associated with liposuction procedure which has to be done in operating room under general anesthesia. Human adipose-derived extracellular matrix (ECM) grafts have been reported to form new adipose tissue and have greater biostability than autologous fat graft. Here, we present an injectable hydrogel that is constructed from adipose tissue derived soluble extracellular matrix (sECM) and methylcellulose (MC) for use in vocal fold augmentation. Human sECM derived from adipose tissue was extracted using two major steps—ECM was isolated from human adipose tissue and was subsequently solubilized. Injectable sECM/MC hydrogels were prepared by blending of sECM and MC. Sustained vocal fold augmentation and symmetric vocal fold vibration were accomplished by the sECM/MC hydrogel in paralyzed vocal fold which were confirmed by laryngoscope, histology and a high-speed imaging system. There were increased number of collagen fibers and fatty granules at the injection site without significant inflammation or fibrosis. Overall, these results indicate that the sECM/MC hydrogel can enhance vocal function in paralyzed vocal folds without early resorption and has potential as a promising material for injection laryngoplasty for stable vocal fold augmentation which can overcome the shortcomings of autologous fat such as unpredictable duration and morbidity associated with the fat harvest.

A bilayer composite composed of TiO2-incorporated electrospun chitosan membrane and human extracellular matrix sheet as a wound dressing

We designed bilayer composites composed of an upper layer of titanium dioxide (TiO2)-incorporated chitosan membrane and a sub-layer of human adipose-derived extracellular matrix (ECM) sheet as a wound dressing for full-thickness wound healing. The dense and fibrous top layer, which aims to protect the wound from bacterial infection, was prepared by electrospinning of chitosan solution followed by immersion in TiO2 solution. The sponge-like sub-layer, which aims to promote new tissue regeneration, was prepared with acellular ECM derived from human adipose tissue. Using a modified drop plate method, there was a 33.9 and 69.6% reduction in viable Escherichia coli and Staphylococcus aureus on the bilayer composite, respectively. In an in vivo experiment using rats, the bilayer composites exhibited good biocompatibility and provided proper physicochemical and compositional cues at the wound site. Changes in wound size and histological examination of full-thickness wounds showed that the bilayer composites induced faster regeneration of granulation tissue and epidermis with less scar formation, than control wounds. Overall results suggest that the TiO2-incorporated chitosan/ECM bilayer composite can be a suitable candidate as a wound dressing, with an excellent inhibition of bacterial penetration and wound healing acceleration effects.

In VitroCartilage Tissue Engineering Using Adipose-Derived Extracellular Matrix Scaffolds Seeded with Adipose-Derived Stem Cells

Extracellular matrix (ECM) secreted from the resident cell of tissue is an ideal biomaterial evolved by nature. Cartilage is also built from well-organized ECM components in a gel-like structure with a high collagen and proteoglycan content. Here, we explored cartilage tissue engineering using ECM scaffolds seeded with stem cells. Both scaffolds and stem cells were isolated from human adipose tissue, which is abundant and easily harvested in the human body. The human ECM scaffolds contained various endogenous bioactive factors, including transforming growth factor-beta1 (TGF-β1, 8782±4989 pg/g, dry ECM), insulin growth factor-1 (13319±1388 pg/g, dry ECM), basic fibroblast growth factor (82373±9572 pg/g, dry ECM), and vascular endothelial growth factor (25647±2749 pg/g, dry ECM). A composite of ECM and stem cells was prepared and cultured in chondrogenic medium (with 10 ng/mL TGF-β1 or not) for 45 days. The volumes and weights of the composites increased during culture and the surface gradually became smooth. Cell viability remained high throughout the 45 days of in vitro culture. Composites showed the formation of cartilage-like tissue with the synthesis of cartilage-specific proteins such as collagen and glycosaminoglycan. Important chondrogenic markers were expressed including Sox-9, aggrecan, and collagen type II and XI. These results demonstrate that a cell/ECM composite containing endogenous bioactive factors could provide biochemical cues for the promotion of cartilage formation.