Adhesive Micropatterns Research Articles

Confinement induces internal flows in adherent cell aggregates.

During mesenchymal migration, F-actin protrusion at the leading edge and actomyosin contraction determine the retrograde flow of F-actin within the lamella. The coupling of this flow to integrin-based adhesions determines the force transmitted to the extracellular matrix and the net motion of the cell. In tissues, motion may also arise from convection, driven by gradients in tissue-scale surface tensions and pressures. However, how migration coordinates with convection to determine the net motion of cellular ensembles is unclear. To explore this, we study the spreading of cell aggregates on adhesive micropatterns on compliant substrates. During spreading, a cell monolayer expands from the aggregate towards the adhesive boundary. However, cells are unable to stabilize the protrusion beyond the adhesive boundary, resulting in retraction of the protrusion and detachment of cells from the matrix. Subsequently, the cells move upwards and rearwards, yielding a bulk convective flow towards the centre of the aggregate. The process is cyclic, yielding a steady-state balance between outward (protrusive) migration along the surface, and 'retrograde' (contractile) flows above the surface. Modelling the cell aggregates as confined active droplets, we demonstrate that the interplay between surface tension-driven flows within the aggregate, radially outward monolayer flow and conservation of mass leads to an internal circulation.

Geometry-Sensitive Protrusion Growth Directs Confined Cell Migration.

The migratory dynamics of cells can be influenced by the complex microenvironment through which they move. It remains unclear how the motility machinery of confined cells responds and adapts to their microenvironment. Here, we propose a biophysical mechanism for a geometry-dependent coupling between cellular protrusions and the nucleus that leads to directed migration. We apply our model to geometry-guided cell migration to obtain insights into the origin of directed migration on asymmetric adhesive micropatterns and the polarization enhancement of cells observed under strong confinement. Remarkably, for cells that can choose between channels of different size, our model predicts an intricate dependence for cellular decision making as a function of the two channel widths, which we confirm experimentally.

Dynamic Micropatterning Reveals Substrate-Dependent Differences in the Geometric Control of Cell Polarization and Migration.

Cells are highly dynamic and adopt variable shapes and sizes. These variations are biologically important but challenging to investigate in a spatiotemporally controlled manner. Micropatterning, confining cells on microfabricated substrates with defined geometries and molecular compositions, is a powerful tool for controlling cell shape and interactions. However, conventional binary micropatterns are static and fail to address dynamic changes in cell polarity, spreading, and migration. Here, a method for dynamic micropatterning is reported, where the non-adhesive surface surrounding adhesive micropatterns is rapidly converted to support specific cell-matrix interactions while allowing simultaneous imaging of the cells. The technique is based on ultraviolet photopatterning of biotinylated polyethylene glycol-grafted poly-L-lysine, and it is simple, inexpensive, and compatible with a wide range of streptavidin-conjugated ligands. Experiments using biotinylation-based dynamic micropatterns reveal that distinct extracellular matrix ligands and bivalent integrin-clustering antibodies support different degrees of front-rear polarity in human glioblastoma cells, which correlates to altered directionality and persistence upon release and migration on fibronectin. Unexpectedly, however, neither an asymmetric cell shape nor centrosome orientation can fully predict the future direction of migration. Taken together, biotinylation-based dynamic micropatterns allow easily accessible and highly customizable control over cell morphology and motility.

Using Adhesive Micropatterns and AFM to Assess Cancer Cell Morphology and Mechanics.

The mechanical properties of living cells reflect their physiological and pathological state. In particular, cancer cells undergo cytoskeletal modifications that typically make them softer than healthy cells, a property that could be used as a diagnostic tool. However, this is challenging because cells are complex structures displaying a broad range of morphologies when cultured in standard 2D culture dishes. Here, we use adhesive micropatterns to impose the cell geometry and thus standardize the mechanics and morphologies of cancer cells, which we measure by atomic force microscopy (AFM), mechanical nanomapping, and membrane nanotube pulling. We show that micropatterning cancer cells leads to distinct morphological and mechanical changes for different cell lines. Micropatterns did not systematically lower the variability in cell elastic modulus distribution. These effects emerge from a variable cell spreading rate associated with differences in the organization of the cytoskeleton, thus providing detailed insights into the structure-mechanics relationship of cancer cells cultured on micropatterns. Combining AFM with micropatterns reveals new mechanical and morphological observables applicable to cancer cells and possibly other cell types.

Cell biology: Centrosomes in inner space

Centrosome positioning is essential for many processes in animal cells, in particular during development and migration. A new study using quantitative analysis of enucleated cells plated on adhesive micropatterns reveals that microtubules position the centrosome in the geometric center of the intracellular space defined by the actin cytoskeleton.

Acto-myosin network geometry defines centrosome position

The centrosome is the main organizer of microtubules and as such, its position is a key determinant of polarized cell functions. As the name says, the default position of the centrosome is considered to be the cell geometrical center. However, the mechanism regulating centrosome positioning is still unclear and often confused with the mechanism regulating the position of the nucleus to which it is linked. Here, we used enucleated cells plated on adhesive micropatterns to impose regular and precise geometrical conditions to centrosome-microtubule networks. Although frequently observed there, the equilibrium position of the centrosome is not systematically at the cell geometrical center and can be close to cell edge. Centrosome positioning appears to respond accurately to the architecture and anisotropy of the actin network, which constitutes, rather than cell shape, the actual spatial boundary conditions the microtubule network is sensitive to. We found that the contraction of the actin network defines a peripheral margin in which microtubules appear bent by compressive forces. The progressive disassembly of the actin network at distance from the cell edges defines an inner zone where actin bundles were absent, where microtubules were more radially organized and where dynein concentration was higher. We further showed that the production of dynein-based forces on microtubules places the centrosome at the center of this zone. In conclusion, the spatial distribution of cell adhesion and the production of contractile forces define the architecture of the actin network with respect to which the centrosome-microtubule network is centered.

FAK-Dependent Cell Motility and Cell Elongation.

Fibroblastic cells show specific substrate selectivity for typical cell–substrate adhesion. However, focal adhesion kinase (FAK) contributes to controlling the regulation of orientation and polarity. When fibroblasts attach to micropatterns, tyrosine-phosphorylated proteins and FAK are both detected along the inner border between the adhesive micropatterns and the nonadhesive glass surface. FAK likely plays important roles in regulation of cell adhesion to the substrate, as FAK is a tyrosine-phosphorylated protein that acts as a signal transduction molecule at sites of cell–substrate attachment, called focal adhesions. FAK has been suggested to play a role in the attachment of cells at adhesive micropatterns by affecting cell polarity. Therefore, the localization of FAK might play a key role in recognition of the border of the cell with the adhesive micropattern, thus regulating cell polarity and the cell axis. This review discusses the regulation and molecular mechanism of cell proliferation and cell elongation by FAK and its associated signal transduction proteins.

Analysis of Organelle Positioning Using Patterned Microdevices.

The consequences of alterations in the distribution of intracellular organelles, observed in many diseases, are often not clear. Intracellular organelles alter their morphology and positioning to regulate cell homeostasis and function. We outline how organelle positioning can be studied employing a density-based analysis of 3D images applied to cells that show similar cellular geometries. Quantification is facilitated by the use of single cells seeded on micropatterned substrates that provide cues for controlled cell spreading. This minimal system mimics the reproducible distribution of organelles typically observed in tissues, simplifying image analysis and minimizing the number of cells required for the observation of robust phenotypes. Here we provide guidelines for how the majority of organelles can be efficiently analyzed in cells seeded on adhesive micropatterns. We exemplify how alterations in the positioning of different organelles as a result of the perturbation of the cytoskeleton or associated motor proteins can be efficiently quantified. © 2018 by John Wiley & Sons, Inc.

Determining the Intracellular Organization of Organelles.

Many studies have found alterations in the positioning and morphology of intracellular organelles under different experimental conditions. Although the precise quantification of these changes is challenging, it is strongly facilitated in single cells that are seeded on micropatterned substrates. Indeed, the controlled microenvironment of the cell leads to a reproducible distribution of organelles, simplifying image analysis and minimizing the number of cells required for robust phenotypes. Here, we outline how alterations in the intracellular organization of lysosomes and mitochondria, as a result of different growth conditions, can be efficiently quantified in cells seeded on adhesive micropatterns.

Microtubule stabilization drives 3D centrosome migration to initiate primary ciliogenesis.

Primary cilia are sensory organelles located at the cell surface. Their assembly is primed by centrosome migration to the apical surface, yet surprisingly little is known about this initiating step. To gain insight into the mechanisms driving centrosome migration, we exploited the reproducibility of cell architecture on adhesive micropatterns to investigate the cytoskeletal remodeling supporting it. Microtubule network densification and bundling, with the transient formation of an array of cold-stable microtubules, and actin cytoskeleton asymmetrical contraction participate in concert to drive apical centrosome migration. The distal appendage protein Cep164 appears to be a key actor involved in the cytoskeleton remodeling and centrosome migration, whereas intraflagellar transport 88's role seems to be restricted to axoneme elongation. Together, our data elucidate the hitherto unexplored mechanism of centrosome migration and show that it is driven by the increase and clustering of mechanical forces to push the centrosome toward the cell apical pole.

Mapping intracellular mechanics on micropatterned substrates

The mechanical properties of cells impact on their architecture, their migration, intracellular trafficking, and many other cellular functions and have been shown to be modified during cancer progression. We have developed an approach to map the intracellular mechanical properties of living cells by combining micropatterning and optical tweezers-based active microrheology. We optically trap micrometer-sized beads internalized in cells plated on crossbow-shaped adhesive micropatterns and track their displacement following a step displacement of the cell. The local intracellular complex shear modulus is measured from the relaxation of the bead position assuming that the intracellular microenvironment of the bead obeys power-law rheology. We also analyze the data with a standard viscoelastic model and compare with the power-law approach. We show that the shear modulus decreases from the cell center to the periphery and from the cell rear to the front along the polarity axis of the micropattern. We use a variety of inhibitors to quantify the spatial contribution of the cytoskeleton, intracellular membranes, and ATP-dependent active forces to intracellular mechanics and apply our technique to differentiate normal and cancer cells.

A simple microfluidic device to study cell-scale endothelial mechanotransduction.

Atherosclerosis is triggered by chronic inflammation of arterial endothelial cells (ECs). Because atherosclerosis develops preferentially in regions where blood flow is disturbed and where ECs have a cuboidal morphology, the interplay between EC shape and mechanotransduction events is of primary interest. In this work we present a simple microfluidic device to study relationships between cell shape and EC response to fluid shear stress. Adhesive micropatterns are used to non-invasively control EC elongation and orientation at both the monolayer and single cell levels. The micropatterned substrate is coupled to a microfluidic chamber that allows precise control of the flow field, high-resolution live-cell imaging during flow experiments, and in situ immunostaining. Using micro particle image velocimetry, we show that cells within the chamber alter the local flow field so that the shear stress on the cell surface is significantly higher than the wall shear stress in regions containing no cells. In response to flow, we observe the formation of lamellipodia in the downstream portion of the EC and cell retraction in the upstream portion. We quantify flow-induced calcium mobilization at the single cell level for cells cultured on unpatterned surfaces or on adhesive lines oriented either parallel or orthogonal to the flow. Finally, we demonstrate flow-induced intracellular calcium waves and show that the direction of propagation of these waves is determined by cell polarization rather than by the flow direction. The combined versatility and simplicity of this microfluidic device renders it very useful for studying relationships between EC shape and mechanosensitivity.

Micromanipulation of daughter cells for the study of cytokinetic abscission.

The last step of cytokinesis, abscission, consists in the severing of the intercellular bridge connecting the two daughter cells. Because daughter cells move randomly on regular cell culture substrates, the use of adhesive micropatterns facilitates the observation of the intercellular bridge and its severing. Here we propose general rules to design micropatterns optimized to study this process. In particular, these micropatterns allow a good stabilization of the daughter cells and a predictable positioning of the intercellular bridge. We suggest a series of micropatterns controlling various cellular parameters such as distance between daughter cells or daughter cells polarization. We give recommendations for videomicroscopy acquisition during cell division and propose automated image analysis methods using kymograph analysis or bridge detection. Finally, we detail methods to artificially cut the intercellular bridge using UV-based laser ablation or using two-photons laser ablation.

Dynamics of Cell Ensembles on Adhesive Micropatterns: Bridging the Gap between Single Cell Spreading and Collective Cell Migration.

The collective dynamics of multicellular systems arise from the interplay of a few fundamental elements: growth, division and apoptosis of single cells; their mechanical and adhesive interactions with neighboring cells and the extracellular matrix; and the tendency of polarized cells to move. Micropatterned substrates are increasingly used to dissect the relative roles of these fundamental processes and to control the resulting dynamics. Here we show that a unifying computational framework based on the cellular Potts model can describe the experimentally observed cell dynamics over all relevant length scales. For single cells, the model correctly predicts the statistical distribution of the orientation of the cell division axis as well as the final organisation of the two daughters on a large range of micropatterns, including those situations in which a stable configuration is not achieved and rotation ensues. Large ensembles migrating in heterogeneous environments form non-adhesive regions of inward-curved arcs like in epithelial bridge formation. Collective migration leads to swirl formation with variations in cell area as observed experimentally. In each case, we also use our model to predict cell dynamics on patterns that have not been studied before.

Regulation of Cultured Fibroblast Cell Polarity on Adhesive Micropatterns

In cultured cell systems, fibroblastic cells select specific substrates for typical cell-substrate adhesion. However, the mechanisms that regulate orientation and polarity are not clear. In this study, using glass-bottomed culture dishes with adhesive micropatterns to regulate polarized cell spreading, we analyzed the behavior of cultured fibroblasts during the organization of cell polarity on adhesive micropatterns. When fibroblasts attached to the micropatterns, both tyrosine-phosphorylated proteins and focal adhesion kinase were strongly detected along the inner border between the adhesive micropatterns and non-adhesive glass surface. The above observation suggests that the confinement of the cells by adhesive micropatterns affects fibroblastic cell polarity. The localization of focal adhesion kinase therefore seems to play a key role in recognition of the border between the adhesive micropattern and the non-adhesive glass surface

Optimizing micropattern geometries for cell shape and migration with genetic algorithms.

Adhesive micropatterns have become a standard tool to control cell shape and function in cell culture. However, the variety of possible patterns is infinitely large and experiments often restrict themselves to established designs. Here we suggest a systematic method to establish novel micropatterns for desired functions using genetic algorithms. The evolutionary fitness of a certain pattern is computed using a cellular Potts model that describes cell behavior on micropattern. We first predict optimal patterns for a desired cell shape. We then optimize ratchet geometries to bias cell migration in a certain direction and find that asymmetric triangles are superior over the symmetric ones often used in experiments. Finally we design geometries which reverse the migration direction of cells when cell density increases due to cell division.

Microfluidic Bioreactors for Cellular Microarrays

Living cell microarrays have been combined with microfluidic bioreactors, which provide multiple advantages for multiplex dynamic analyses and high-throughput screening. In the last decade, many developments in this new field have been introduced. The technology has evolved from fixed cell analysis towards living single-cell dynamic systems’ biology and high content analyses. The aim of this review is to provide an updated overview of the developments of living cellular microarrays in microfluidic bioreactors. Cell arrays in microfluidic bioreactors constructed with adherent mammalian cells are compared to non-adherent cells (mainly microbial cells). An overview is given on the design and construction of these microfluidic devices with a particular focus on cell patterning techniques. Cell patterning on adhesive micropatterns using techniques such as microcontact printing, microfluidic patterning, dip-pen nanolithography and polymer pen lithography as well as photo-patterning and laser-patterning strategies are discussed. Additionally, developments in mechanical cell patterning methods and robotic cell printing are reviewed. Two-dimensional (2D) as well as recently developed 3D cell arraying are discussed. Finally, cell array microfluidic setups and operation for single-cell types versus cell population variants are illustrated and compared on the basis of some illustrative examples in the field of drug screening, cytotoxicity evaluation, and basic cellular and microbiology research.

Fabrication of RGD micro/nanopattern and corresponding study of stem cell differentiation.

Micropatterns of gold (Au) nanoarrays on inorganic and polymeric substrates were fabricated by combining block copolymer micelle nanolithography to obtain gold nanoarrays on glass, photolithography plus hydrofluoric acid (HF) etching to generate microislands, and transfer lithography to shift the gold micro/nanopatterns from glass to a bioinert poly(ethylene glycol) (PEG) hydrogel surface. Further the modification of the gold nanodots via cell-adhesive arginine-glycine-aspartate (RGD) ligands was carried out to achieve peptide micro/nanopatterns. Whereas the micro/nanopatterns of noble metals could be useful in various applications, the peptide micro/nanopatterns especially enable persistent cell localization on adhesive micropatterns of RGD nanoarrays on the background of potently nonfouling PEG hydrogels, and thus offer a powerful tool to investigate cell-material interactions on both molecular and cellular levels. As a demonstration, we cultured human mesenchymal stem cells (hMSCs) on micro/nanopatterns with RGD nanoarrays of nanospacings 46 and 95 nm, and with micropans of side lengths 35 and 65 μm (four groups in total). The osteogenic and adipogenic differentiation of hMSCs was conducted, and the potential effect of RGD nanospacing and the effect of cell spreading size on cell differentiation were decoupled for the first time. The results reveal that RGD nanospacing, independent of cell spreading size, acts as a strong regulator of cell tension and stem cell differentiation, which cannot be concluded unambiguously based on either merely micropatterns or nanopatterns.

Dlg1 controls planar spindle orientation in the neuroepithelium through direct interaction with LGN.

Oriented cell divisions are necessary for the development of epithelial structures. Mitotic spindle orientation requires the precise localization of force generators at the cell cortex via the evolutionarily conserved LGN complex. However, polarity cues acting upstream of this complex in vivo in the vertebrate epithelia remain unknown. In this paper, we show that Dlg1 is localized at the basolateral cell cortex during mitosis and is necessary for planar spindle orientation in the chick neuroepithelium. Live imaging revealed that Dlg1 is required for directed spindle movements during metaphase. Mechanistically, we show that direct interaction between Dlg1 and LGN promotes cortical localization of the LGN complex. Furthermore, in human cells dividing on adhesive micropatterns, homogenously localized Dlg1 recruited LGN to the mitotic cortex and was also necessary for proper spindle orientation. We propose that Dlg1 acts primarily to recruit LGN to the cortex and that Dlg1 localization may additionally provide instructive cues for spindle orientation.

Correction to Fabrication of Hydrogel with Cell Adhesive Micropatterns for Mimicking the Oriented Tumor-Associated Extracellular Matrix

Correction to Fabrication of Hydrogel with Cell Adhesive Micropatterns for Mimicking the Oriented Tumor-Associated Extracellular Matrix