Dental Adhesives Research Articles

Endocrown : from preparation to bonding : Case report /// L'endocouronne : de la préparation au collage : à propos d'un cas clinique

The restoration of endodontically treated teeth is a real challenge, particularly teeth with extensively damaged coronal tissues. The use of post-retained restorations has been discussed because of the potential tooth weakening due to the additional removal of sound dental structures. In fact, long-term prognosis of a devitalized tooth is closely related to the coronal restoration’s quality and the remaining dental structure.With the development of adhesive dentistry and minimally invasive preparation, new approaches have emerged. Among them, the endocrown which is monolithic ceramic bonded restoration, anchored to the internal portion of pulp chamber and cavity margins that have been used as an alternative to conventional post and core.

Effectiveness of self-etching bonding systems on dentin after radiotherapy: perspectives on microtensile and microshear bond strength.

Self-etching dental adhesives bond with dentin through chemical reactions with calcium. This study assessed bond strength (BS) using microtensile (µTBS) and microshear (µSBS) tests on sound and post-radiotherapy dentin, with dental adhesives containing different functional monomers. Sound dentin (SD) and post-radiotherapy irradiated dentin (ID) were tested with two adhesive systems: Clearfil SE Bond (SE, 10-MDP-based) and FL Bond II (FL, containing carboxylic and phosphonic monomers with S-PRG bioactive particles). The tests occurred initially (24h) and six months later; fracture mode was also analyzed (40x). Ninety-six human molars were randomly assigned (n = 12), and half were irradiated with a 70Gy radiation dose. ForµTBS test, teeth were bonded,restored and sectioned them into beams (0.64 mm2). The µSBS test used filled transparent cylindrical matrices with resin composite and light-cured them after dental adhesive applications. Three-way ANOVA and Tukey's test (p < 0.05) analyzed the data. µTBS showed a significant substrate x adhesive interaction (p < 0.001), while µSBS was significant for all factors (p = 0.006). SE and FL performed better on SD and ID, respectively, in the µTBS test. As for µSBS, SE showed higher values on ID (p < 0.05). Lower BS values occurred for SD-FL and ID-SE after six months. Dental adhesive performance varied based on substrate type and test method. FL was more stable for ID in µTBS, while SE excelled in µSBS. As post-radiotherapy irradiated dentin becomes more vulnerable, self-etching systems based on functional monomer and bioactive ingredients may exhibit appropriate bonding to this altered substrate.

Advances and Functional Integration of Hydrogel Composites as Drug Delivery Systems in Contemporary Dentistry.

This study explores the recent advances of and functional insights into hydrogel composites, materials that have gained significant attention for their versatile applications across various fields, including contemporary dentistry. Hydrogels, known for their high water content and biocompatibility, are inherently soft but often limited by mechanical fragility. Key areas of focus include the customization of hydrogel composites for biomedical applications, such as drug delivery systems, wound dressings, and tissue engineering scaffolds, where improved mechanical properties and bioactivity are critical. In dentistry, hydrogels are utilized for drug delivery systems targeting oral diseases, dental adhesives, and periodontal therapies due to their ability to adhere to the mucosa, provide localized treatment, and support tissue regeneration. Their unique properties, such as mucoadhesion, controlled drug release, and stimuli responsiveness, make them ideal candidates for treating oral conditions. This review highlights both experimental breakthroughs and theoretical insights into the structure-property relationships within hydrogel composites, aiming to guide future developments in the design and application of these multifunctional materials in dentistry. Ultimately, hydrogel composites represent a promising frontier for advancing materials science with far-reaching implications in healthcare, environmental technology, and beyond.

Synergistic effects of bacteria, enzymes, and cyclic mechanical stresses on the bond strength of composite restorations

Predicting how tooth and dental material bonds perform in the mouth requires a deep understanding of degrading factors. Yet, this understanding is incomplete, leading to significant uncertainties in designing and evaluating new dental adhesives. The durability of dental bonding interfaces in the oral microenvironment is compromised by bacterial acids, salivary enzymes, and masticatory fatigue. These factors degrade the bond between dental resins and tooth surfaces, making the strength of these bonds difficult to predict. Traditionally studied separately, a combined kinetic analysis of these interactions could enhance our understanding and improvement of dental adhesive durability. To address this issue, we developed and validated an original model to evaluate the bond strength of dental restorations using realistic environments that consider the different mechanical, chemical, and biological degradative challenges working simultaneously: bacteria, salivary esterases, and cyclic loading. We herein describe a comprehensive investigation on dissociating the factors that degrade the bond strength of dental restorations. Our results showed that cariogenic bacteria are the number one factor contributing to the degradation of the bonded interface, followed by cyclic loading and salivary esterases. When tested in combinatorial mode, negative and positive synergies towards the degradation of the interface were observed. Masticatory loads (i.e., cycling loading) enhanced the lactic acid bacterial production and the area occupied by the biofilm at the bonding interface, resulting in more damage at the interface and a reduction of 73 % in bond strength compared to no-degraded samples. Salivary enzymes also produced bond degradation caused by changes in the chemical composition of the resin/adhesive. However, the degradation rates are slowed compared to the bacteria and cyclic loading. These results demonstrate that our synergetic model could guide the design of new dental adhesives for biological applications without laborious trial-and-error experimentation.

A thorough assessment of 10-MDP primers in modern dental adhesive systems

Background: Dental primers are pivotal in achieving durable and reliable bonding between dental adhesives and tooth structures. Among the various primers’ components, the functional monomer 10-methacryloyloxydecyl dihydrogen phosphate is gaining significant attention owing to its unique chemical properties and bond-enhancing capabilities. Aims: This paper comprehensively reviewed current knowledge on the functional monomer 10-methacryloyloxydecyl dihydrogen phosphate. We focus on its chemistry, interactions with tooth substrates, interactions with zirconium and other metals, adhesive’s longevity, clinical applications, and potential drawbacks. Sources: Our sources are the Internet, such as Google Scholar and PubMed. Study selection: Studies investigating the efficacy of 10-MDP primers were included. Conclusions: The emergence of 10-MDP primers has significantly advanced the field of dental adhesives by providing reliable bonding solutions to enamel and dentin. The chemical interaction between 10-MDP and tooth substrates demonstrates remarkable adhesive strength and longevity.

A Literature Review of Adhesive Systems in Dentistry: Key Components and Their Clinical Applications

The central aim of adhesive dentistry is to improve the compatibility between current adhesives and a range of substrates by employing diverse application techniques. Therefore, the overarching objective of this review is to offer a comprehensive analysis of dentin bonding systems, starting with an introduction to adhesion and a detailed overview of enamel and dentin structures, their histology, and the impact of dentin structure on resin–dentin bonding. It covers the mechanisms of resin–dentin bonding, including resin adhesive application, bonding mechanisms, and factors influencing efficacy. Further, this review explores the composition of resin adhesive systems, including acidic components, cross-linking monomers, solvents, and other critical elements. It also examines various adhesive strategies—etch-and-rinse, self-etch, and universal adhesives—highlighting their applications and advantages. The review extends to clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), demonstrating the practical implications of adhesive systems in enhancing restoration longevity and performance. In conclusion, despite significant advancements, no gold-standard method for optimal adhesion exists. Each adhesive system has distinct strengths and limitations. The review emphasizes the importance of evaluating methods for achieving durable adhesion and staying current with technological advancements in adhesive systems. Summary: This review provides a thorough analysis of dentin bonding systems, delving into the structures and bonding mechanisms of both enamel and dentin. By exploring various adhesive systems and their components, it highlights the ongoing challenges in achieving optimal resin–dentin adhesion. The review also addresses the clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), illustrating how different adhesive techniques impact clinical outcomes. It underscores the necessity for continuous innovation and assessment of adhesive systems to enhance long-term bonding effectiveness in clinical practice.

The Science Behind Bioactive Dental Adhesive Systems: Benefits and Applications

The Science Behind Bioactive Dental Adhesive Systems: Benefits and Applications

Study of ZnO nanoparticle-doped dental adhesives on enamels with fluorosis: Electron microscopy, elemental composition and shear bond strength analysis.

This study aimed to evaluate dental adhesives containing different concentrations of zinc oxide nanoparticles (ZnO-NPs) for their use in the treatment of dental fluorosis, observe the interaction of the adhesive on healthy enamel surfaces and with mild and moderate fluorosis, measure the adhesive strength and fluorosis, and determine the phosphorus (P) and calcium (Ca) content on these surfaces, as a reference for the potential use of this adhesive with ZnO-NPs for dental fluorosis treatment. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) were used to characterise the ZnO-NPs and analyse the weight percentages of P and Ca in the enamel using X-ray energy dispersive spectroscopy (EDS) and the adhesive strength using a universal mechanical testing machine. FESEM characterisation revealed that the ZnO-NPs were less than 100nm in size, with quasi-spherical and hexagonal prism shapes. The synthesis of the ZnO-NPs was confirmed by TEM, revealing their hexagonal crystalline structure. The adhesive strength by the universal mechanical testing machine showed that the adhesive with a 3% wt. concentration of ZnO-NPs was better in the three groups of teeth, showing higher adhesive strength in teeth with mild (15.15MPa) and moderate (12.76MPa) fluorosis surfaces, and was even higher than that in healthy teeth (9.65MPa). EDS analysis showed that teeth with mild and moderate fluorosis had the highest weight percentages of P and Ca, but there were no statistically significant differences compared to healthy teeth and teeth treated with adhesives. Lay description: This study focused on testing a new dental adhesive containing small particles called ZnO nanoparticles (ZnO-NPs). This study aimed to demonstrate whether this adhesive with ZnO-NPs could be useful for treating dental fluorosis by improving its adhesion to teeth. One of the first objectives was to determine whether the dental adhesive could adhere better to teeth affected by mild or moderate fluorosis than to healthy teeth by measuring whether the levels of two important elements for healthy teeth, calcium (Ca) and phosphorus (P), were affected by the adhesive. The size and shape of the small particles and teeth with mild or moderate fluorosis were observed using scanning electron microscopy. The nanoparticles were small (< 100nm) and had specific quasi-spherical and hexagonal prismatic shapes. More damage to the enamel was observed in teeth with mild or moderate fluorosis than in healthy teeth. The adhesive strength test demonstrated that the dental adhesive with 3% ZnO-NPs had the best adhesion on all healthy conditions of teeth. It was particularly effective in teeth with mild or moderate fluorosis. Finally, the evaluation of the levels of P and Ca on the enamel showed that teeth with fluorosis had higher levels of these elements, but using the dental adhesive with ZnO-NPs did not change the levels of these elements significantly because the adhesive avoided greater detachment because of greater adhesion to these surfaces. In conclusion, adding these small particles to dental adhesives could be an option for treating teeth affected by fluorosis. It stuck well and did not affect the levels of the important elements in the teeth.

Comparative evaluation of the effect of 2% graphene oxide and 5% hydroxyapatite nanoparticles in isolation and in combination on micro tensile bond strength of 5th generation adhesive

Background Graphene is the thinnest, strongest, and stiffest imaginable material. The biocompatible property of graphene oxide can initiate and facilitate cell adhesion, proliferation, and differentiation of periodontal ligament, osteogenic, and oral epithelial cells. Furthermore, the antibiofilm and anti-adhesion properties of graphene oxide in the prevention of dental biofilm infections, dental caries, and dental erosion as well as for implant surface modification and as an anti-quorum sensing agent. Composites are the most often utilized materials for restoration in the field of dentistry due to adhesive resins' improved mechanical and cosmetic properties. To safeguard the dentin and prevent dental cavities, dentin adhesives are utilized to affix hydrophobic resin composites to hydrophilic dentin tissue. Materials and Method Dental adhesives have a harder time adhering to dentin because it contains more water and is less mineralized than enamel. This makes the method more sensitive. Result As a result, it was chosen to assess and contrast the impact of 5% Hydroxyapatite nanoparticles and 2% Graphene oxide nanoparticles, both separately and together, on the Micro tensile bond strength of 5th generation adhesive. Conclusion Graphene oxide is the most versatile form of Graphite in structural and functional configuration. Graphene oxide possesses extraordinary physical, chemical, optical, electrical and mechanical properties. Among the graphene family nanomaterials, the reduced form of Graphite adding the oxygenated functional group to the structure increases the surface area and therefore exhibits enviable excellent interaction ability with metal and ions as well as organic species. Graphene oxide in dentistry has provided outstanding results in antimicrobial action, regenerative dentistry, bone tissue engineering, drug delivery, physicochemical properties, enhancement of dental biomaterials and oral cancer treatment.

Design of Unconventional Polymers with Thermal Contraction Units for High-Performance Dental Adhesives.

The coefficient of thermal expansion (CTE) of adhesives is considered to be a vital parameter for dental restoration due to the oral temperature fluctuation induced by hot and cold drinks in daily life. Even more challenging, the adhesives need to bond various materials with different CTE values, and mismatched thermal expansion at the interface of two materials will produce thermal stress and cause cracking, leading to bond failure. In this study, we designed and synthesized a divinyl monomer containing a dibenzocyclooctadiene (DBCOD) unit, which was incorporated into a commercial adhesive, Single Bond Universal (SBU) to prepare low CTE adhesives. The CTE value of the adhesives can be adjusted low to 6.5 ppm/K, which is much lower than that of pure SBU. Mimicking the real applying conditions, the composite resin columns were bonded to the zirconia ceramics as a dental crown with our designed adhesives, and the shear bond strength test was carried out before and after 10 000 thermal cycles between 5 and 55 °C. The shear bond strength of pure SBU retains 44.7% of its original value after 10 000 thermal cycles, while those low CTE adhesives retain 74.6% and 61.9% of shear bond strength due to less deformation and interfacial stress during thermocycling. The newly designed adhesives provide a persistent way to enhance the shear bond strength and achieve a long lifetime in tooth restoration.

Clinical Efficacy of a Novel Titania Nanoparticle-Reinforced Bonding Agent in Reducing Post-Restorative Sensitivity: A randomized clinical trial.

To evaluate the clinical efficacy of novel titania-nanoparticle reinforced bonding agent on post-restorative sensitivity in patients. This triple-blinded, randomized clinical trial included participants (n = 60) having Class- I and II cavitations with a minimum cavity depth of 3mm at Department of Operative Dentistry & Endodontics, School of Dentistry, Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad from January 5, 2023, to June 20, 2023. They were randomly assigned into two groups A and B (n = 30). After informed consent, restorative intervention was accomplished using an etch-and-rinse adhesive strategy. In Group-A, titania-nanoparticle-incorporated bonding agent was used for composite restoration, while in Group-B, bonding agent without nanoparticles was used. The primary outcome was assessed using Visual Analogue Scale mean score. Participants were instructed to rate their sensitivity status at follow-ups: 24 hours, one week, and one month. Mann-Whitney U test was employed to compare sensitivity between the two groups. According to results of this trial, a significant difference was observed between two groups after 24 hours (p = 0.004) and one week (p = 0.002). However, no discernible difference was observed after one month (p = 0.643). Post-restorative sensitivity in patients with composite restorations was reduced using titania-reinforced bonding agents as compared to bonding agents without nanoparticles. This shows that inclusion of titania nanoparticles into adhesive dentistry could be beneficial in resolving post-restorative sensitivity occurring with composite restorations.

Flexural strength of dental adhesives with different photoinitiator systems.

The aim of this study was to investigate the flexural strength of dental adhesives containing different combinations of photoinitiators systems. The organic matrix of the experimental adhesives was created using a blend of monomers: 50% by weight bisphenol-A glycidyl methacrylate (BisGMA) and 50% triethylene glycol dimethacrylate (TEGDMA). The photoinitiators utilized were camphorquinone (CQ) and phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide (BAPO), with diphenyliodonium hexafluorophosphate (DPIHFP) and 2-(Dimethylamino)ethyl methacrylate (DMAEMA) as co-initiators. These photoinitiators and co-initiators were integrated into the organic matrix at a concentration of 0.5% by mass, resulting in the formation of 6 groups (n=12): CQ/DMAEMA (control); CQ/DMAEMA/DPIHFP; BAPO; BAPO/DMAEMA; BAPO/DPIHFP and BAPO/DMAEMA/DPIHFP. Samples measuring 7 mm in length, 2 mm in width, and 1 mm in height were prepared and subjected to a three-point flexural test. Data were analyzed using one-way ANOVA with Tukey's post-hoc test (α=0.05). Results indicated that groups incorporating BAPO and DPIHFP exhibited higher flexural strength compared to those with CQ and DMAEMA. The BAPO/DPIHFP group achieved the highest mean flexural strength values (p<0.001). These findings suggest that using adhesive systems with alternative photoinitiators and co-initiators can lead to superior flexural strength compared to conventional systems. Key words:Photoinitiators, Dentin-bonding agents, Light-curing.

Advanced Material Strategy for Restoring Damaged Endodontically Treated Teeth: A Comprehensive Review.

The restoration of endodontically treated teeth (ETT) remains a significant challenge in modern dentistry. These teeth often suffer from substantial structural damage due to both the original pathology and the invasive nature of endodontic procedures. Consequently, ETT are more susceptible to fractures compared to vital teeth, necessitating restorative strategies that can effectively restore both function and aesthetics while minimizing the risk of failure. In recent years, advances in adhesive dentistry and the development of high-strength ceramics have further expanded the restorative options for ETT. Bonded restorations have gained popularity as they preserve more tooth structure and enhance the overall strenght of the tooth-restoration complex. The choice of restorative material and technique is influenced by numerous factors, including the amount of remaining tooth structure, the functional requirements of the tooth, and the aesthetic demands of the patient. Despite the plethora of available materials and techniques, the optimal approach to restoring ETT remains a topic of ongoing research and debate. In this comprehensive review, the current state of and recent advances in restoring damaged endodontically treated teeth are explored. Numerous therapeutic options exist, involving a wide range of materials. This article aims to present the biomaterial advancements of the past decade and their applications, offering alternative approaches to treating damaged ETT with the goal of prolonging their retention on the dental arch and serving as a valuable resource for dental practitioners who face this issue daily.

Does dental material type influence bacterial adhesion under the same polishing conditions? Direct observation using a fluorescent staining technique: An in vitro study.

Highly polished 3, 4, and 5 mol% yttria-stabilized zirconia and CAD/CAM composite resin samples were prepared, and the influence of surface roughness (Ra and Sa, 21 areas/group), wettability (contact angle and surface energy, 3 samples/group), and surface chemical composition (2 samples/group) on single-strain bacterial adhesion models (Porphyromonas gingivalis, Streptococcus oralis, Streptococcus sanguinis, Streptococcus gordonii, and Streptococcus mutans) were compared via fluorescent staining with graphical analysis (21 areas/group). Statistical analysis was performed using the Shapiro-Wilk test followed by one-way analysis of variance with Tukey's test or the Kruskal-Wallis test with Dunn's test (α=0.05) and linear regression. For dental zirconia with the same surface roughness, the yttria content did not significantly influence the initial bacterial adhesion. However, higher bacterial adhesion was detected for the composite resin owing to its high C, O, and Si contents. There was no correlation between surface energy and bacterial adhesion for any bacterial strain (p<0.005).

The evolution of adhesive dentistry: a review of materials and techniques

Adhesive dentistry has undergone remarkable advancements since its inception, fundamentally transforming restorative dental care. Initially marked by the development of early resins and etching techniques, adhesive dentistry has evolved to incorporate sophisticated materials and innovative techniques that significantly enhance clinical outcomes. The introduction of Bis-GMA resins in the 1960s improved mechanical properties and reduced polymerization shrinkage, paving the way for modern composite resins. These composites, enhanced by nanotechnology and advanced filler technology, provide superior strength, wear resistance, and esthetic qualities. Techniques such as selective enamel etching and multi-layering of adhesive systems have further improved bond strength and reduced technique sensitivity. The clinical applications of adhesive dentistry are extensive, ranging from direct and indirect restorations to cosmetic procedures and preventive measures. Direct composite restorations offer minimally invasive solutions with excellent esthetics, while indirect restorations such as inlays, onlays, and veneers benefit from strong, reliable bonds and improved durability. Cosmetic procedures, including veneers, achieve dramatic esthetic improvements with long-lasting results. Preventive applications, such as sealants, effectively protect against caries, especially in pediatric and high-caries-risk patients. The continuous refinement of materials and techniques has led to better clinical outcomes, increased patient satisfaction, and reduced need for invasive procedures. Advances in adhesive materials and methods have ensured that restorations not only mimic natural tooth structures but also maintain their integrity under functional forces. As research and development in adhesive dentistry continue to progress, the field is poised to offer even more innovative and effective solutions, further enhancing the quality of dental care. Overall, the evolution of adhesive dentistry underscores its pivotal role in modern dental practice, providing durable, esthetic, and reliable restorative options that meet the diverse needs of patients.

Hybrid Layer, Shear Bond Strength, and Fracture Patterns of Titanium Dioxide–Doped Phosphate Glass–Filled Universal Dental Adhesives

Abstract Objectives The aim of the study was to explore the potential effects of incorporating 5 and 10 wt% of TiO2-doped phosphate glass powder as fillers into the universal adhesive system. Materials and Methods Human permanent premolars and molars were used in the study. Five and 10 wt% of TiO2-doped phosphate glass powder as fillers were added into the universal adhesive system. Unmodified universal adhesive was used as control. The effects of the added filler in the universal adhesive were examined on hybrid layer formation at the resin composite and dentine interface (mesio-occlusal-distal [MOD] cavities) under scanning electron microscope (SEM), shear bond strength (SBS) of resin composite to dentine using shear bond testing machine, and the patterns of fracture at the resin composite–dentin interface, which were examined under stereomicroscope. The SBS analyses were performed with (8 samples per group, n = 24) and without (8 samples per group, n = 24) 5,000 cycles of thermocycling. Statistical Analysis One-way analysis of variance (ANOVA) was used to analyze the data of the SBS. For bond strength, the effects of adding fillers into the universal adhesive were analyzed. Results The SEM images showed that the hybrid layers were similar in all the groups of unmodified and modified adhesives. An ANOVA test revealed that the SBSs of control and modified adhesives were not significantly different before (p = 0.15) or after (p = 0.39) thermocycling for all the groups. The patterns of fracture revealed various types of fracture in all adhesive groups including composite resin, adhesive, and dentine failure. Composite resin fractures are the most encountered pattern of fracture. Conclusion Adding 5 and 10 wt% of TiO2 into universal adhesive did not adversely affect the hybrid layer, SBS, or mode of failure of composite resin to dentine. The pattern of fracture at the resin composite and dentine interface showed a favorable bonding with more cohesive than adhesive failure, particularly with the 5 wt% glass-modified adhesive group.

Properties of a Dental Adhesive Containing Graphene and DOPA-Modified Graphene.

Graphene is a promising biomaterial. However, its dispersion in aqueous medium is challenging. This study aimed to modify graphene nanoparticles with L-dopa to improve the properties of experimental dental adhesives. Adhesives were formulated with 0% (control), 0.25%, 0.5%, and 0.75% of graphene, modified or not. Particle modification and dispersion were microscopically assessed. Degree of conversion was tested by Fourier-transform infrared spectroscopy. Flexural strength and modulus of elasticity were evaluated by a 3-point flexural test. Bond strength was tested by shear. To test water sorption/solubility, samples were weighed during hydration and dehydration. Antibacterial activity was tested by Streptococcus mutans colony-forming units quantification. Cytotoxicity on fibroblasts was evaluated through a dentin barrier test. The modification of graphene improved the particle dispersion. Control presented the highest degree of conversion, flexural strength, and bond strength. In degree of conversion, 0.25% of groups were similar to control. In bond strength, groups of graphene modified by L-dopa were similar to Control. The modulus of elasticity was similar between groups. Cytotoxicity and water sorption/solubility decreased as particles increased. Compared to graphene, less graphene modified by L-dopa was needed to promote antibacterial activity. By modifying graphene with L-dopa, the properties of graphene and, therefore, the adhesives incorporated by it were enhanced.

Utilizing Laser-Induced Fluorescence to Evaluate the Efficiency of Carbon Dioxide and Diode Lasers in Dentin Sealing after Tooth Preparation: An in-vitro Study.

Adhesive dentistry has made it feasible to design restorations with high aesthetic qualities and little invasiveness. However, the freshly cut dentin after the tooth preparation needs to be sealed to prevent its contaminations, bacterial leakage, and hypersensitivity. Consequently, the immediate dentin sealing (IDS) method has been advised. This study examines different dentinal tubule sealing methods via CO2 laser, diode laser (980-nm) and a two-step self-etch adhesive system applied directly to the fresh cut dentin preceding the placement of the provisional phase. The sealing efficiency of each laser and bond system was evaluated based on the laser-induced fluorescence (LIF) properties and image analysis by scanning electron microscopy. Moreover, the obtained LIF spectra were evaluated using partial least square progression. A two-step adhesive containing a high concentration of S-PRG fillers produced a thick layer that was not perfectly uniform at all sites due to uneven filler distribution in the bond with totally and partially closed dentinal tubules. However, the peaks of the LIF spectra dropped after applying laser because of its sealing effectiveness. Accordingly, CO2 and diode lasers have strong evidence in dentinal tubule sealing and a definitive treatment modality for dentinal hypersensitivity. Moreover, IDS with an adhesive system is superior in occluding dentinal tubules in a biomimetic manner based on its filler content and bioactive properties.

Engineering Interfacial Integrity with Hydrolytic-Resistant, Self-Reinforcing Dentin Adhesive.

The leading cause of composite restoration failure is secondary caries, and although caries is a multifactorial problem, weak, damage-prone adhesives play a pivotal role in the high susceptibility of composite restorations to secondary caries. Our group has developed synthetic resins that capitalize on free-radical polymerization and sol-gel reactions to provide dental adhesives with enhanced properties. The resins contain γ-methacryloxypropyltrimethoxysilane (MPS) as the Si-based compound. This study investigated the properties of methacrylate-based resins containing methacryloxymethyltrimethoxysilane (MMeS) as a short-chain alternative. The degree of conversion (DC), polymerization kinetics, water sorption, mechanical properties, and leachates of MMeS- and MPS-resins with 55 and 30 wt% BisGMA-crosslinker were determined. The formulations were used as model adhesives, and the adhesive/dentin (a/d) interfaces were analyzed using chemometrics-assisted micro-Raman spectroscopy. The properties of the 55 wt% formulations were comparable. In the 30 wt% BisGMA formulations, the MMeS-resin exhibited faster polymerization, lower DC, reduced leachates, and increased storage and loss moduli, glass transition (Tg), crosslink density, and heterogeneity. The spectroscopic results indicated a comparable spatial distribution of resin, mineralized, and demineralized dentin across the a/d interfaces. The hydrolytically stable experimental short-chain-silane-monomer dental adhesive provides enhanced mechanical properties through autonomous strengthening and offers a promising strategy for the development of restorative dental materials with extended service life.

Decellularized leaf-based biomaterial supports osteogenic differentiation of dental pulp mesenchymal stem cells.

Decellularized tissues are an attractive scaffolds for 3D tissue engineering. Decellularized animal tissues have certain limitations such as the availability of tissue, high costs and ethical concerns related to the use of animal sources. Plant-based tissue decellularized scaffolds could be a better option to overcome the problem. The leaves of different plants offer a unique opportunity for the development of tissue-specific scaffolds, depending on the reticulate or parallel veination. Herein, we decellularized spinach leaves and employed thesefor the propagation and osteogenic differentiation of dental pulp stem cells (DPSCs). DPSCs were characterized by using mesenchymal stem cell surface markers CD90, CD105 and CD73 and CD34, CD45 and HLA-DR using flow cytometry. Spinach leaves were decellularized using ethanol, NaOH and HCL. Cytotoxicity of spinach leaf scaffolds were analysed by MTT assay. Decellularized spinach leaves supported dental pulp stem cell adhesion, proliferation and osteogenic differentiation. Our data demonstrate that the decellularized spinach cellulose scaffolds can stimulate the growth, proliferation and osteogenic differentiation of DPSCs. In this study, we showed the versatile nature of decellularized plant leaves as a biological scaffold and their potential for bone regeneration in vitro.