Adhesion Factor Research Articles

Temperature‐Responsive Injectable Hydrogels Containing Gelatin and Cell Adhesion Peptides for Adipose‐Derived Stem Cell Delivery

ABSTRACTResearch on injectable polymers (IPs) has been actively conducted in recent decades for biomedical applications. Temperature‐responsive IPs are especially effective because they can be gelled by injecting them into a living organism without external contamination. Adipose‐derived stem cells (AdSCs) can be easily harvested in a minimally invasive manner and differentiated into various cell lineages. Versatile therapeutic applications have been developed through the secretion of various cytokines from AdSCs. In this study, we prepared IP hydrogels comprising a temperature‐responsive polymer with reactive succinimide groups (tri‐PCG‐OSu), a biomacromolecule (gelatin) as a crosslinker, and Pluronic with RGDS peptide (PL‐RGDS) as a cell adhesion factor to extend the duration of the gel state and improve cell engraftment in the IP hydrogels for AdSC delivery. The combined use of gelatin and cell adhesion peptides in the polymer matrix improved the fraction of living cells encapsulated in the IP hydrogels and increased the expression levels of angiogenic factors in AdSCs cultured within them. We also presume that a certain number of cells in the IP hydrogels could be differentiated into adipocytes using the differentiation‐inducing medium. These results suggest that our temperature‐responsive IP system could be used as a cell delivery material for regenerative medicine.

Wuzi-Yanzong-Wan Prevents the Defect of Cell-Cell Junctions between Sertoli-Germ Cells by Up-Regulating the Expression of TAp73.

The TAp73 gene is an anti-cancer gene that also affects the junction between Sertoli and germ cells. Inhibition of this gene causes infertility in male mice. Our previous research proved that Wuzi-Yanzong-Wan (WZYZW) can protect spermatogenesis and maturation by preventing TAp73 inhibition. This study aimed to investigate the effect of drug-containing serum of WZYZW on the defect of cell-cell junctions in the Sertoli-germ cells co-culture system in vitro. LC-HRMS was used to analyze the content of active ingredients in WZYZWmedicated serum. Then, primary extraction and co-culture of germ cells and Sertoli cells were carried out. Co-cultured cells were added with PFT-α to induce the TAp73 inhibition model, with WZYZW-medicated serum at 2.5%, 5%, and 10% treated in parallel. Sloughing of germ cells from Sertoli cells was calculated. Transmission electron microscopy (TEM), Immunofluorescence, qRT-PCR, and western blot methods were employed. The drug-containing serum of WZYZW contained schisandrin, hyperoside, geniposidic acid, ellagic acid, and quercetin. Using TEM assay, we observed restoration of the desmosomelike (Des), tight junctions (TJ), and basal ectoplasmic specialization (ES) structure following WZYZW treatment. WZYZW caused inhibition of peptidase and protease inhibitors (tissue inhibitor of metalloproteinase-1 (TIMP1), Serpina3n) by immunofluorescence analysis. Western blot and qRT-PCR analysis revealed that WZYZW was able to ameliorate the expressions of peptidase and protease inhibitors and cell adhesion factors, such as TAp73, TIMP1, Serpina3n, Desmocollin-3, N-cadherin, and Nectin-2. WZYZW-medicated serum could prevent the defect of cell-cell junctions between Sertoli-germ cells co-culture system in vitro by up-regulating the expression of TAp73.

Genomic Epidemiology of Extrapulmonary Nontuberculous Mycobacteria Isolates at Emerging Infections Program Sites - United States, 2019-2020.

Nontuberculous mycobacteria (NTM) cause pulmonary and extrapulmonary infections. Although isolation of NTM from clinical specimens has increased nationally, few studies delineated the molecular characteristics of extrapulmonary NTM. Extrapulmonary isolates were collected by four Emerging Infections Program sites from October 2019 to March 2020 and underwent laboratory characterization, including matrix-assisted laser desorption ionization-time of flight mass spectrometry, Sanger DNA sequencing, and whole genome sequencing. Bioinformatics analyses were employed to identify species, sequence types (STs), antimicrobial resistance (AR), and virulence genes; isolates were further characterized by phylogenetic analyses. Among 45 isolates, the predominant species were Mycobacterium avium (n=20, 44%), Mycobacterium chelonae (n=7, 16%), and Mycobacterium fortuitum (n=6, 13%). The collection represented 31 STs across 10 species; the most common ST was ST11 (M. avium, n=7). Mycobacterium fortuitum and Mycobacterium abscessus isolates harbored multiple genes conferring resistance to aminoglycosides, beta-lactams, and macrolides. No known AR mutations were detected in rpoB, 16S, or 23S rRNAs. Slow-growing NTM species harbored multiple virulence genes including type-VII secretion components, adhesion factors, and phospholipase C. Continued active laboratory- and population-based surveillance will further inform the prevalence of NTM species and STs, monitor emerging clones, and allow AR characterization.

Bacteriological characteristics and changes of Streptococcus pneumoniae serotype 35B after vaccine implementation in Japan.

Streptococcus pneumoniae serotype 35B, a non-vaccine type, is a major contributor to the increase in pneumococcal infection post-vaccination. We aimed to understand the mechanism of its spread by characterizing 35B. The serotype, type 1 pilus (T1P) positivity, and antimicrobial susceptibility of 319 isolates in 2018-2022 were analysed and compared with those of isolates in 2014-2017 to find the changes. 35B accounted for 40 (12.5%) isolates. T1P positivity was notably higher in 35B (87.5%) than in the other serotypes. To confirm the role of T1P, an adhesion factor, we compared adherence to A549 cells between T1P-positive 35B isolates and their T1P-deficient mutants, showing contribution of T1P to adherence. Penicillin-non-susceptible rate of 35B was 87.5%, and meropenem-resistant 35B rate was 35.0%, which increased from 14.5% of 2014-2017 (p=0.009). Multilocus sequence typing was performed in 35B strains. Prevalence of clonal complex 558, harbouring T1P and exhibiting multidrug non-susceptibility, suggested the advantages of 35B in attachment and survival in the host. The emergence of ST156 isolates, T1P-positive and non-susceptible to β-lactams, has raised concern about expansion in Japan. The increase of serotype 35B in pneumococcal diseases might have occurred due to its predominant colonizing ability after the elimination of the vaccine-serotypes.

Clinical significance and underlying mechanism of long non-coding RNA SNHG12 in lower extremity deep venous thrombosis.

D-dimer is widely used in the diagnosis of deep vein thrombosis (DVT), but the specificity is low. The study examined the diagnostic value of long non-coding RNA (lncRNA) SNHG12 in DVT, and preliminarily discussed its mechanism. SNHG12 levels were detected in 200 elderly fracture patients via RT-qPCR, including 38 DVTs. Logistic regression analysis and receiver operating characteristic (ROC) curve were applied for diagnostic value evaluation. HUVECs were used for function study. Cell proliferation, migration, apoptosis, release of inflammatory cytokines, and adhesion factors were detected. Student's t test and one-way ANOVA were applied for data comparison between two or among three or more groups. Correlation analysis of indicators was completed via Pearson's correlation analysis. Bioinformatics analysis predicted the target miRNAs and genes of SNHG12, with GO and KEGG for the function enrichment. It was found that SNHG12 was at low expression in DVT patients, and negatively correlated with D-dimer concentration (r = -0.535). SNHG12 and D-dimer were independent influence factors related to the development of DVT. SNHG12 and D-dimer combination had the best performance in DVT diagnosis. In HUVECs, SNHG12 promoted cell proliferation and migration and restricted the release of inflammatory cytokines and adhesion factors, but these influences were counteracted by miR-424-5p. A total of 208 overlapping target genes of miR-424-5p were identified, and their function was enriched in cellular cycle and senescence. PI3K-Akt signaling pathway was the most significant pathway based on KEGG results. In conclusion, SNHG12 had good diagnostic potential for DVT combined with D-dimer. SNHG12 maintains vascular endothelial cell function by acting as a competitive endogenous RNA (ceRNA) for miR-424-5p.

Actinidia chinensis polysaccharide interferes with the epithelial-mesenchymal transition of gastric cancer by regulating the nuclear transcription factor-κB pathway to inhibit invasion and metastasis.

To investigate the mechanisms of the effect of Actinidia chinensis polysaccharide (ACPS) on the invasion and metastasis of gastric cancer cells. BGC-823-Luc gastric cancer cells stably transfected with a luciferase gene were used to establish an insitutransplanted tumor mouse model. A live mouse imaging system was used to observe tumor growth, and hematoxylin and eosin staining was applied to analyze tissue histopathology. Transwell and scratch wound assays were performed to examine the invasive and migratory ability of BGC-823 cells. Immunofluorescence, confocal microscopy, immunohistochemistry, and Western blot assays were used to analyze the expressions of the nuclear transcription factor-κB (NF-κB) signaling pathway and epithelial-mesenchymal transition (EMT)-related proteins. ACPS significantly inhibited the growth of subcutaneously transplanted BGC-823-Luc gastric cancer tumors in nude mice and reduced inflammatory cell infiltration in tumor tissues. ACPS inhibited Epidermal Growth Factor-induced invasion, migration, and morphological changes in the cytoskeleton of BGC-823 cells. ACPS inhibited gastric cancer EMT and decreased the expression of matrix metallopeptidase 9, N-cadherin and p-NF-κB p65 in transplanted tumor tissues. ACPS inhibited the expression of matrix metalloproteinases and vascular adhesion factors in BGC-823 cells, promoted p65-NF-κB nuclear translocation, and regulated proteins associated with the NF-κB p65 pathway. ACPS inhibited gastric cancer invasion and metastasis both in vivo and in vitro, which evidenced the inhibition of gastric cancer EMT viaregulating the NF-κB inflammatory pathway.

VEGF-dependent testicular vascularisation involves MEK1/2 signalling and the essential angiogenesis factors, SOX7 and SOX17

BackgroundAbnormalities of in utero testis development are strongly associated with reproductive health conditions, including male infertility and testis cancer. In mouse testes, SOX9 and FGF9 support Sertoli cell development, while VEGF signalling is essential for the establishment of vasculature. The mitogen-activated protein kinase (MAPK) pathway is a major signalling cascade, essential for cell proliferation, differentiation and activation of Sry during primary sex-determination, but little is known about its function during fetal testis morphogenesis. We explored potential functions of MAPK signalling immediately after the establishment of testis cords in embryonic day (E)12.5 Oct4-eGFP transgenic mouse testes cultured using a MEK1/2 inhibitor.ResultsRNA sequencing in isolated gonadal somatic cells identified 116 and 114 differentially expressed genes after 24 and 72 h of MEK1/2 inhibition, respectively. Ingenuity Pathway Analysis revealed an association of MEK1/2 signalling with biological functions such as angiogenesis, vasculogenesis and cell migration. This included a failure to upregulate the master transcriptional regulators of vascular development, Sox7 and Sox17, VEGF receptor genes, the cell adhesion factor gene Cd31 and a range of other endothelial cell markers such as Cdh5 (encoding VE-cadherin) and gap junction genes Gja4 and Gja5. In contrast, only a small number of Sertoli cell enriched genes were affected. Immunofluorescent analyses of control testes revealed that the MEK1/2 downstream target, ERK1/2 was phosphorylated in endothelial cells and Sertoli cells. Inhibition of MEK1/2 eliminated pERK1/2 in fetal testes, and CD31, VE-cadherin, SOX7 and SOX17 and endothelial cells were lost. Consistent with a role for VEGF in driving endothelial cell development in the testis, inhibition of VEGFR also abrogated pERK1/2 and SOX7 and SOX17 expressing endothelial cells. Moreover, while Sertoli cell proliferation and localisation to the testis cord basement membrane was disrupted by inhibition of MEK1/2, it was unaffected by VEGFR inhibition. Instead, inhibition of FGF signalling compromised Sertoli cell proliferation and localisation to the testis cord basement membrane.ConclusionsTogether, our data highlight an essential role for VEGF-dependent MEK1/2 signalling in promoting vasculature and indicate that FGF signalling through MEK1/2 regulates Sertoli cell organisation in the developing mouse testis.

Analytical study on included angle of double-plate vertically loaded anchors in saturated clay

The double-plate vertically loaded anchor (DPVLA) represents a new type of anchor. To maximize the ultimate pullout capacity of a DPVLA in saturated clay, it is crucial to determine the included angle corresponding to the maximum pullout capacity (IAMPC). An expression for the IAMPC of the DPVLA in saturated clay has been derived based on its mechanical model. Furthermore, the influence of various parameters on the IAMPC is analyzed based on the derived expression. The effect of the IAMPC of the DPVLA on the critical embedment depth has been investigated through finite element analysis. The results indicate that, aside from the area of the auxiliary fluke, the IAMPC of the DPVLA is significantly influenced by other parameters, which also impact the ultimate pullout capacity associated with IAMPC, except for the adhesion factor. Additionally, it is also found that the critical embedment depth of a DPVLA, with the main fluke area equal to that of the auxiliary fluke, increases with the IAMPC until a -maximum critical embedment depth is reached. These findings provide valuable insights for the design and installation of DPVLAs in saturated clay environments.

Research Progress on the SDF-1/CXCR4 Axis in Cartilage Injury

The chemokine CXCL12, also known as stromal cell-derived factor 1 (SDF-1), is a small pro-inflammatory chemokine that primarily binds to CXC receptor 4 (CXCR4; CD184), serving as a major regulatory factor for cell transport and adhesion. When SDF-1 binds to CXCR4, it triggers intracellular signaling through several pathways that initiate processes such as chemotaxis, cell survival, proliferation, calcium influx, and gene transcription. The SDF-1/CXCR4 axis plays a crucial role in the development of bone marrow stem cells and the process of tissue regeneration. Repairing cartilage tissue necessitates a sufficient number of chondrocytes, making bone marrow mesenchymal stem cells particularly suitable for this purpose. This signaling pathway is essential for cartilage injury repair. It promotes stem cell migration and localization, regulates cell proliferation and differentiation, and inhibits inflammatory responses. This article reviews the current research advancements related to the SDF-1/CXCR4 axis in cartilage tissue repair.

ZNF429 Participates in the Progression of Coronary Heart Disease through Regulating Inflammatory and Adhesive Factors

Background: Coronary heart disease (CHD) is an intricate and multifaceted cardiovascular disorder that contributes significantly to global morbidity and mortality. Early and accurate identification and diagnosis of CHD are paramount to ensuring patients receive optimal therapeutic interventions and satisfactory outcomes. Methods: Data on CHD gene expression were obtained from the Gene Expression Omnibus (GEO) repository and potential hub genes were screened through gene ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), weighted gene co-expression network analysis (WGCNA), and least absolute shrinkage and selection operator (LASSO) analyses. Functional validation of these hub genes was conducted by interfering with them in human umbilical vein endothelial cells (HUVECs). Cell proliferation and apoptosis were assessed through cell counting kit-8 (CCK-8) and flow cytometry assays, respectively, while enzyme-linked immunosorbent assay (ELISA), quantitative polymerase chain reaction (qPCR), Western blot, and immunofluorescence were used to measure the expression of key indicators. Results: We identified 700 upregulated differentially expressed genes (DEGs) and 638 downregulated DEGs in CHD, and utilized LASSO analyses to screen disease potential biomarkers, such as zinc finger protein 429 (ZNF429). Interference with ZNF429 in HUVECs mitigated the CHD-induced decrease in cell proliferation and increase in apoptosis. Moreover, the expression of interleukin-1β (IL-1β), interleukin-6 (IL-6), tumor necrosis factor-alpha (TNF-α), vascular cell adhesion molecule-1 (VCAM-1), intercellular adhesion molecule-1 (ICAM-1), cluster of differentiation 62E (CD62E), and cluster of differentiation 62P (CD62P) was reduced, leading to decreased cellular inflammation and adhesion. Conclusions: CHD-associated biomarker ZNF429 was identified through bioinformatics analysis to potentially regulate the expression of inflammatory factors IL-6, IL-1β, and TNF-α, along with adhesion molecules ICAM-1, VCAM-1, CD62E, and CD62P. This modulation influence was subsequently found to impact the progression of CHD. These findings offered valuable insights into potential targets for further investigation and therapeutic interventions for CHD management.

Water-resistant adhesive tackified by dynamic adhesion factor of nucleotide

Underwater adhesives have gained much attention across diverse fields including tissue adhesives, wearable electronics, and underwater electronics. However, it remains challenging to design a tough and stable underwater adhesion interface only relying on physical adhesion mechanisms, because the adhesion factors of the physical adhesives are limited and bound by molecular networks. Inspired by the toughening theory of “sacrificial bonds”, we present a strategy of dynamic adhesion factor to fabricate a tough and stable underwater adhesion interface. The adhesives tackified by nucleotide of dynamic adhesion factor are successfully developed and demonstrate excellent adhesion behavior in aquatic environments. The adhesion factor of nucleotide featuring reversible dynamic structural characteristics not only facilitates easier interaction with the substrate but also effectively dissipates failure stress and mitigates stress concentration when exposed to destructive stress. Moreover, the adhesives exhibit excellent recyclability, on-demand detachability, and long-term stability. Importantly, this strategy demonstrated a universality for variable monomers to construct tough underwater adhesion. It is anticipated that the dynamic adhesion factor strategy will inspire a new paradigm in the advancement of next-generation water-resistant adhesives.

A Literature Review of Adhesive Systems in Dentistry: Key Components and Their Clinical Applications

The central aim of adhesive dentistry is to improve the compatibility between current adhesives and a range of substrates by employing diverse application techniques. Therefore, the overarching objective of this review is to offer a comprehensive analysis of dentin bonding systems, starting with an introduction to adhesion and a detailed overview of enamel and dentin structures, their histology, and the impact of dentin structure on resin–dentin bonding. It covers the mechanisms of resin–dentin bonding, including resin adhesive application, bonding mechanisms, and factors influencing efficacy. Further, this review explores the composition of resin adhesive systems, including acidic components, cross-linking monomers, solvents, and other critical elements. It also examines various adhesive strategies—etch-and-rinse, self-etch, and universal adhesives—highlighting their applications and advantages. The review extends to clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), demonstrating the practical implications of adhesive systems in enhancing restoration longevity and performance. In conclusion, despite significant advancements, no gold-standard method for optimal adhesion exists. Each adhesive system has distinct strengths and limitations. The review emphasizes the importance of evaluating methods for achieving durable adhesion and staying current with technological advancements in adhesive systems. Summary: This review provides a thorough analysis of dentin bonding systems, delving into the structures and bonding mechanisms of both enamel and dentin. By exploring various adhesive systems and their components, it highlights the ongoing challenges in achieving optimal resin–dentin adhesion. The review also addresses the clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), illustrating how different adhesive techniques impact clinical outcomes. It underscores the necessity for continuous innovation and assessment of adhesive systems to enhance long-term bonding effectiveness in clinical practice.

Genomic approach to determine sources of neonatal Staphylococcus aureus infection from carriage in the Gambia

Staphylococcus aureus is a major cause of neonatal infections in various anatomical sites, resulting in high morbidity and mortality in The Gambia. These clinical infections are often preceded by nasal carriage of S. aureus, a known risk factor. To determine whether potential sources of newborn S. aureus infections were from carriage, and to characterize S. aureus present in different anatomical sites (blood, ear, eye, umbilical cord, skin, pus, oropharynx, breast milk and vagina), we performed whole-genome sequencing of 172 isolates from clinical sites as well as from healthy and unhealthy carriage. A random selection of mothers (n = 90) and newborns (n = 42) participating in a clinical trial and testing positive for S. aureus were considered for this study. Sequence data were analyzed to determine S. aureus multilocus sequence types and selected antimicrobial and virulence gene profiles. Our findings revealed that in The Gambia, ST15 is the dominant sequence type associated with both carriage and clinical infection. In addition, S. aureus isolates causing clinical infection among neonates were genetically similar to those colonizing their oropharynx, and the different anatomical sites were not found to be uniquely colonized by S. aureus of a single genomic profile. Furthermore, while S. aureus associated with clinical infection had similar antimicrobial resistance gene profiles to carriage isolates, only hemolysin and adhesive factor virulence genes were significantly higher among clinical isolates. In conclusion, this study confirmed S. aureus oropharyngeal colonization among neonates as a potential source of clinical infection in The Gambia. Hence, interventions aiming to reduce neonatal clinical infections in The Gambia should consider decreasing oropharyngeal S. aureus carriage.Trial registration The trial was registered at ClinicalTrials.gov NCT03199547.

Screening of Neutralizing Antibodies against FaeG Protein of Enterotoxigenic Escherichia coli.

The misuse of antibiotics in veterinary medicine presents significant challenges, highlighting the need for alternative therapeutic approaches such as antibody drugs. Therefore, it is necessary to explore the application of antibody drugs in veterinary settings to reduce economic losses and health risks. This study focused on targeting the F4ac subtype of the FaeG protein, a key adhesion factor in enterotoxigenic Escherichia coli (ETEC) infections in piglets. By utilizing formaldehyde-inactivated ETEC and a soluble recombinant FaeG (rFaeG) protein, an antibody library against the FaeG protein was established. The integration of fluorescence-activated cell sorting (FACS) and a eukaryotic expression vector containing murine IgG Fc fragments facilitated the screening of anti-rFaeG IgG monoclonal antibodies (mAbs). The results demonstrate that the variable regions of the screened antibodies could inhibit K88-type ETEC adhesion to IPEC-J2 cells. Furthermore, in vivo neutralization assays in mice showed a significant increase in survival rates and a reduction in intestinal inflammation. This research underscores the potential of antibody-based interventions in veterinary medicine, emphasizing the importance of further exploration in this field to address antibiotic resistance and improve animal health outcomes.

Analytical model of friction at low shear rates for soft materials in 3D printing.

The biological properties of silicone elastomers such as polydimethylsiloxane (PDMS) have widespread use in biomedicine for soft tissue implants, contact lenses, soft robots, and many other small medical devices, due to its exceptional biocompatibility. Additive manufacturing of soft materials still has significant challenges even with major advancements that have occurred in development of these technologies for customized medical devices and tissue engineering. The aim of this study was to develop a mathematical model of tangential stress in relation to shear stress, shear rate, 3D printing pressure and velocity, for non-Newtonian gels and fluids that are used as materials for 3D printing. This study used FENE (finitely extensible nonlinear elastic model) model, for non-Newtonian gels and fluids to define the dependences between tangential stress, velocity, and pressure, considering viscosity, shear stress and shear rates as governing factors in soft materials friction and adhesion. Experimental samples were fabricated as showcases, by SLA and FDM 3D printing technologies: elastic polymer samples with properties resembling elastic properties of PDMS and thermoplastic polyurethane (TPU) samples. Experimental 3D printing parameters were used in the developed analytical solution to analyse the relationships between governing influential factors (tangential stress, printing pressure, printing speed, shear rate and friction coefficient). Maple software was used for numerical modelling. Analytical model applied on a printed elastic polymer, at low shear rates, exhibited numerical values of tangential stress of 0.208-0.216 N m - 2 at printing velocities of 0.9 to 1.2 mm s - 1, while the coefficient of friction was as low as 0.09-0.16. These values were in accordance with experimental data in literature. Printing pressure did not significantly influence tangential stress, whereas it was slightly influenced by shear rate changes. Friction coefficient linearly increased with tangential stress. Simple analytical model of friction for elastic polymer in SLA 3D printing showed good correspondence with experimental literature data for low shear rates, thus indicating possibility to use it for prediction of printing parameters towards desired dimensional accuracy of printed objects. Further development of this analytical model should enable other shear rate regimes, as well as additional soft materials and printing parameters.

Research of recombinant influenza A virus as a vector for Mycoplasma pneumoniae P1a and P30a.

Mycoplasma pneumoniae (MP) is a common respiratory pathogen affecting the longevity of the elderly and the health of children. However, the human vaccine against MP has not been successfully developed till now due to the poor immunogenicity and side effects of MP inactivated or attenuated vaccine. Therefore, it is necessary to develop a MP genetic engineering vaccine with influenza virus strain as vector. In this study, the major antigen genes P1a of MP adhesion factor P1(3862-4554 bases) and P30a of P30(49-822 bases) were inserted into the nonstructural protein (NS) gene of Influenza A virus strain A/Puerto Rio/8/34(H1N1), PR8 for short, to construct the recombinant vectors NS-P1a or NS-P30a. The recombinant pHW2000 plasmids containing NS-P1a or NS-P30a were cotransfected with the rest 7 fragments of PR8 into HEK293T cells. After inoculating chicken embryos, the recombinant influenza viruses rFLU-P1a and rFLU-P30a were rescued. RT-PCR and sequencing were used to identify the recombinant viruses. The hemagglutination titers of rFLU-P1a and rFLU-P30a were determined after five successive generations in chicken embryos so as to indicate the genetic stability of the recombinant viruses. The morphology of recombinant influenza viruses was observed under electron microscopy. P1a or P30a was designed to be inserted into the modified NS gene sequence separately and synthesized successfully. RT-PCR identification of the recombinant viruses rFLU-P1a and rFLU-P30a showed that P1a (693 bp), P30a (774 bp), NS-P1a (1992bp) and NS-P30a (2073 bp) bands were found, and the sequencing results were correct. After five successive generations, each virus generation has a certain hemagglutination titer (from 1:32 to 1:64), and the band of P1a or P30a can be seen in the corresponding positions. The virus particles under the electron microscope appeared as spheres or long strips connected by several particles, revealing a complete viral membrane structure composed of virus lipid bilayer, hemagglutinin, neuraminidase, and matrix proteins. The recombinant viruses rFLU-P1a and rFLU-P30a which carried the advantaged immune regions of the P1 and P30 genes in MP were successfully constructed and identified. And the genetic stability of rFLU-P1a or rFLU-P30a was relatively high. The typical and complete morphology of influenza virus was observed under the electron microscope. Our research provided a foundation for the further development of MP vaccines for human.

The heart is a resident tissue for hematopoietic stem and progenitor cells in zebrafish

The contribution of endocardial cells (EdCs) to the hematopoietic lineages has been strongly debated. Here, we provide evidence that in zebrafish, the endocardium gives rise to and maintains a stable population of hematopoietic cells. Using single-cell sequencing, we identify an endocardial subpopulation expressing enriched levels of hematopoietic-promoting genes. High-resolution microscopy and photoconversion tracing experiments uncover hematopoietic cells, mainly hematopoietic stem and progenitor cells (HSPCs)/megakaryocyte-erythroid precursors (MEPs), derived from EdCs as well as the dorsal aorta stably attached to the endocardium. Emergence of HSPCs/MEPs in hearts cultured ex vivo without external hematopoietic sources, as well as longitudinal imaging of the beating heart using light sheet microscopy, support endocardial contribution to hematopoiesis. Maintenance of these hematopoietic cells depends on the adhesion factors Integrin α4 and Vcam1 but is at least partly independent of cardiac trabeculation or shear stress. Finally, blocking primitive erythropoiesis increases cardiac-residing hematopoietic cells, suggesting that the endocardium is a hematopoietic reservoir. Altogether, these studies uncover the endocardium as a resident tissue for HSPCs/MEPs and a de novo source of hematopoietic cells.

Application of external voltage-applied enhances surface adhesion of Shewanella oneidensis MR-1

Electroactive bacteria play a crucial role in electrocatalytic oxidation and reduction reactions within bioelectrochemical systems (BES). However, the influence of BES startup modes on the adhesion of electroactive bacteria and the underlying mechanisms remains elusive. We hypothesize that startup mode-induced microniches trigger changes in bacterial motility, which mediate bacterial adhesion on anodic surface. To test this hypothesis, we employed Shewanella oneidensis MR-1 as a model strain and launched investigations in single-chambered BES under both external voltage-free (EVF) and external voltage-applied (EVA) modes. Our results showed that the EVA mode facilitated MR-1 adhesion up to fourfold compared to the EVF mode. Surface chemistry analysis revealed that EVA mode, with proper external voltages (400–600 mV), enhanced substrate adsorption onto anodic surfaces by up to 410 %, significantly promoting bacterial cell movement and chemotactic migration towards anodic surfaces, thereby facilitating bacterial adhesion. Principal component analysis and structural equation modeling indicated that lactate adsorption capacity was the determining factor for bacterial adhesion under EVF mode, whereas external voltage diminished the effect of lactate on triggering cell motility and subsequent bacterial adhesion in the EVA mode. Our findings provide valuable insights into the initiation and enhancement of electrochemically active biofilm on electrode surfaces in BES.

Apoptosis-Cell Cycle-Autophagy Molecular Mechanisms Network in Heterogeneous Aggressive Phenotype Prostate Hyperplasia Primary Cell Cultures Have a Prognostic Role.

Our study highlights the apoptosis, cell cycle, DNA ploidy, and autophagy molecular mechanisms network to identify prostate pathogenesis and its prognostic role. Caspase 3/7 expressions, cell cycle, adhesion glycoproteins, autophagy, nuclear shrinkage, and oxidative stress by flow-cytometry analysis are used to study the BPH microenvironment's heterogeneity. A high late apoptosis expression by caspases 3/7 activity represents an unfavorable prognostic biomarker, a dependent predictor factor for cell adhesion, growth inhibition by arrest in the G2/M phase, and oxidative stress processes network. The heterogeneous aggressive phenotype prostate adenoma primary cell cultures present a high S-phase category (>12%), with an increased risk of death or recurrence due to aneuploid status presence, representing an unfavorable prognostic biomarker, a dependent predictor factor for caspase 3/7 activity (late apoptosis and necrosis), and cell growth inhibition (G2/M arrest)-linked mechanisms. Increased integrin levels in heterogenous BPH cultures suggest epithelial-mesenchymal transition (EMT) that maintains an aggressive phenotype by escaping cell apoptosis, leading to the cell proliferation necessary in prostate cancer (PCa) development. As predictor biomarkers, the biological mechanisms network involved in apoptosis, the cell cycle, and autophagy help to establish patient prognostic survival or target cancer therapy development.

The Effects of the Addition of Strontium on the Biological Response to Calcium Phosphate Biomaterials: A Systematic Review

Strontium is known for enhancing bone metabolism, osteoblast proliferation, and tissue regeneration. This systematic review aimed to investigate the biological effects of strontium-doped calcium phosphate biomaterials for bone therapy. A literature search up to May 2024 across Web of Science, PubMed, and Scopus retrieved 759 entries, with 42 articles meeting the selection criteria. The studies provided data on material types, strontium incorporation and release, and in vivo and in vitro evidence. Strontium-doped calcium phosphate biomaterials were produced via chemical synthesis and deposited on various substrates, with characterization techniques confirming successful strontium incorporation. Appropriate concentrations of strontium were non-cytotoxic, stimulating cell proliferation, adhesion, and osteogenic factor production through key signaling pathways like Wnt/β-catenin, BMP-2, Runx2, and ERK. In vivo studies identified novel bone formation, angiogenesis, and inhibition of bone resorption. These findings support the safety and efficacy of strontium-doped calcium phosphates, although the optimal strontium concentration for desired effects is still undetermined. Future research should focus on optimizing strontium release kinetics and elucidating molecular mechanisms to enhance clinical applications of these biomaterials in bone tissue engineering.