Additional Hydroxyl Research Articles

α‐Nucleophilic Addition to α,β‐Unsaturated Carbonyl Compounds via Photocatalytically Generated α‐Carbonyl Carbocations

AbstractWe report the photocatalytic oxidation of α‐carbonyl radicals of amides or esters to the corresponding α‐carbonyl carbocations through super photoreductant CBZ6 induced redox‐neutral photocatalysis. The α‐carbonyl radicals are formed by the β‐addition of alkyl radicals generated in situ by the photocatalytic fragmentation of N‐hydroxyphthalimide esters to the α,β‐unsaturated amides and esters. This method enables the α‐nucleophilic addition of hydroxyl or alkoxyl radicals to amides and esters without any prefunctionalization.

α-Nucleophilic Addition to α,β-Unsaturated Carbonyl Compounds via Photocatalytically Generated α-Carbonyl Carbocations.

We report the photocatalytic oxidation of α-carbonyl radicals of amides or esters to the corresponding α-carbonyl carbocations through super photoreductant CBZ6 induced redox-neutral photocatalysis. The α-carbonyl radicals are formed by the β-addition of alkyl radicals generated in situ by the photocatalytic fragmentation of N-hydroxyphthalimide esters to the α,β-unsaturated amides and esters. This method enables the α-nucleophilic addition of hydroxyl or alkoxyl radicals to amides and esters without any prefunctionalization.

Atmospheric Degradation of CH2═C(CH3)C(O)O[CH2]4CH3 by •OH Radicals: Reactivity, POCP, and Carbonyl Formation.

Relative rate studies of the gas-phase reaction of amyl methacrylate, CH2═C(CH3)C(O)O[CH2]4CH3, with •OH radicals were performed at (298 ± 2) K and 1000 mbar. The experiments were conducted in an atmospheric Pyrex chamber coupled to in situ Fourier transform infrared spectroscopy (FTIR). The rate coefficient obtained from the average of several experiments was kAMMA+•OH = (8.10 ± 1.98) × 10-11 cm3 molecule-1 s-1. Additionally, product studies were conducted under conditions similar to those of the kinetic experiments by using in situ FTIR spectroscopy. Pentanal, butanal, and hydroxyacetone were identified as the main reaction products. The initial pathway for the degradation of amyl methacrylate with •OH radicals occurs via addition of •OH to the >C═C< bond or hydrogen abstraction from the alkyl chain of the ester. The likelihood of hydrogen atom abstraction is 25%, while the addition of hydroxyl radicals to the double bond occurs with a probability of 75%. Based on these outcomes, a degradation mechanism is postulated. Furthermore, the atmospheric implications of the studied reaction were evaluated by estimating the tropospheric lifetime of amyl methacrylate toward •OH radicals as τOH = 3.43 h. Additionally, the Photochemical Ozone Creation Potential (POCP) of 84 was calculated for the reaction studied. Carbonyl compounds found as reaction products can exert a substantial influence on both air quality and public health.

Differential Cytoprotective Effect of Resveratrol and Its Derivatives: Focus on Antioxidant and Autophagy-Inducing Effects

Numerous beneficial effects of resveratrol were reported; however, its pharmacological profile is contradictious. Previously, we have demonstrated that resveratrol has a dose-dependent cytoprotective effect and the essential role of autophagy induction was demonstrated. Resveratrol suffers from unfavorable pharmacokinetics, hindering its clinical use. Our aim was to study the cytoprotective effect of resveratrol derivatives to better understand structure–activity relationships that may facilitate the development of compounds with better druglike characteristics. Serum-deprivation-induced caspase activation, free radical generation, mitochondrial membrane depolarization and autophagy were detected in the presence of resveratrol analogs with different oxidation states on mouse embryonal fibroblasts. Distinct cytoprotective mechanisms of the examined compounds were revealed. Monomethyl resveratrol had similar potency to resveratrol (EC50: 85.3 vs. 84.2 μM); however, autophagy induction was not essential for its cytoprotective effect. Oxyresveratrol was found to be a strong antioxidant that can induce direct cytoprotection rather than autophagy. Trimethyl-resveratrol, lacking free hydroxyl groups, induced damage that was too significant and hardly compensated by the activation of cytoprotective machineries, and caspase activation was reduced by only 24.5%. Based on our results, methylation of resveratrol reduces its antioxidant activity, while autophagy induction can still contribute to its cytoprotective effect. The introduction of an additional hydroxyl group, however, augments the antioxidant properties, inducing cytoprotection without autophagy induction.

The Effects of Montmorillonite–Humic Acid Composite Particles on the Photolysis of Tetracycline in Water

Suspended particulate matter (SPM) is an important component of natural water bodies and can significantly influence the photolytic behavior of water pollutants. A comprehensive understanding of the photochemical behavior of water pollutants in natural waters requires consideration of the presence of SPM. In this study, montmorillonite–humic acid (MMT-HA) composite particles were synthesized to simulate SPM in natural waters and their effects on the photolysis of tetracycline (TC) were investigated. The results demonstrated that the presence of MMT-HA composite particles in water significantly enhanced the photolysis of TC, with the photolytic kinetics following a pseudo-first-order model. Electron spin resonance spectra and free radical quenching experiments indicated that the photoactive components (MMT and humic acids) in the composite particles induced the generation of reactive oxygen species under light exposure, further contributing to the enhanced photolysis of TC. Comparative analysis of the free radical signals and adsorption experiments revealed that the accelerated photolysis of TC was also related to the interfacial interaction between the MMT in the composite particles and the TC molecules. The formation of surface complexes between TC molecules and the negatively charged sites on the MMT surface facilitated light absorption and electron transfer, thereby accelerating the photolysis of TC. Photoproduct analysis indicated that the primary degradation pathways of TC in the composite particle systems included the addition of hydroxyl radicals to the aromatic ring, as well as demethylation, deamination and dehydration in the side chains. This study shows that SPM in water bodies can affect the photochemical behavior of pollutants and should be taken into account when assessing the phototransformation of pollutants in natural waters.

Enhanced adsorption of malachite green (MG) dye using RF glow oxygen plasma-modified coconut carbon shell: A sustainable approach for effluent treatment

The textile industry produces dye pollutants that are both harmful and difficult to degrade. This study explores the enhanced adsorption of Malachite Green (MG) dye using coconut carbon shells treated with RF glow oxygen plasma discharge. Plasma treatment improved the surface properties of the adsorbent by introducing oxygen-containing functional groups and increasing surface polarity, which boosted dye adsorption through hydrogen bonding, electrostatic interactions, and π-π stacking. Experimental results revealed that a 10-minute plasma treatment optimally enhanced adsorption capacity by 39 % compared to untreated samples. The Langmuir isotherm model demonstrated a maximum adsorption capacity (qm) of 161 mg/g, surpassing the Freundlich model. At pH 8, using 0.2 g of adsorbent in 50 mL solutions with initial dye concentrations of 25 mg/L and 100 mg/L, the 10-minute plasma-treated samples achieved adsorption capacities of 6.01 mg/g and 23.95 mg/g, respectively, compared to 4.72 mg/g and 17.2 mg/g for the untreated samples. This corresponded to removal efficiencies of 96.12 % and 95.8 % for the treated samples, and 75.6 % and 68.8 % for the untreated samples, after 80 min of contact at 200 rpm. UV–vis spectrophotometry confirmed the reduction in dye concentration after adsorption. FE-SEM analysis revealed that plasma treatment created micro-pores on the coconut carbon shell, enhancing adsorption capacity, while SEM-EDX analysis showed increased oxygen content after 10 min of treatment. FTIR analysis identified additional carbonyl (-C=O) and hydroxyl (-OH) groups, indicating the incorporation of oxygen-containing functional groups due to plasma treatment. Confocal Raman microscopy was also used to analyze the microstructural changes in the samples.

In Situ Functionalization of Polar Polythiophene-Based Organic Electrochemical Transistor to Interface In Vitro Models.

Organic mixed ionic-electronic conductors are promising materials for interfacing and monitoring biological systems, with the aim of overcoming current challenges based on the mismatch between biological materials and convectional inorganic conductors. The conjugated polymer/polyelectrolyte complex poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT/PSS) is, up to date, the most widely used polymer for in vitro or in vivo measurements in the field of organic bioelectronics. However, PEDOT/PSS organic electrochemical transistors (OECTs) are limited by depletion mode operation and lack chemical groups that enable synthetic modifications for biointerfacing. Recently introduced thiophene-based polymers with oligoether side chains can operate in accumulation mode, and their chemical structure can be tuned during synthesis, for example, by the introduction of hydroxylated side chains. Here, we introduce a new thiophene-based conjugated polymer, p(g42T-T)-8% OH, where 8% of the glycol side chains are functionalized with a hydroxyl group. We report for the first time the compatibility of conjugated polymers containing ethylene glycol side chains in direct contact with cells. The additional hydroxyl group allows covalent modification of the surface of polymer films, enabling fine-tuning of the surface interaction properties of p(g42T-T)-8% OH with biological materials, either hindering or promoting cell adhesion. We further use p(g42T-T)-8% OH to fabricate the OECTs and demonstrate for the first time the monitoring of epithelial barrier formation of Caco-2 cells in vitro using accumulation mode OECTs. The conjugated polymer p(g42T-T)-8% OH allows organic-electronic-based materials to be easily modified and optimized to interface and monitor biological systems.

Partially bio-derived phosphazene-tannic acid microspheres as fire retardant additives for an epoxy tannic acid resin system

In this work, partially bio-derived colloidal microspheres are synthesised from tannic acid (TA) and hexachloro-cyclophosphazene (HCCP), then investigated for their effectiveness as a fire-retardant additive to a partially bioderived epoxy resin system. The epoxy resin system is based upon diglycidyl ether of bisphenol A (DGEBA) and tannic acid (TA), a bio-derived highly aromatic phenolic curative noted for its inherent fire retardancy. This study presents the impact of increasing the concentration of the phosphazene-TA microspheres (TAPZ) and varying the DGEBA-TA stoichiometry to determine the optimum formulation required to achieve the greatest improvement in fire retardancy. At 15 wt% TAPZ addition, the DGEBA-TA resin system easily achieves a V-0 rating according to the UL-94 vertical burn test, measures 29 % for the limiting oxygen value (LOI) and displays a 62 % reduction in peak heat release rate (PHRR) compared with the unmodified DGEBA-TA network. TAPZ addition however reduces the glass transition temperature (Tg) from 187 °C to 155 °C, flexural strength by up to 30 % and increases viscosity significantly. Varying the stoichiometry between DGEBA and TA shows that additional surface hydroxyl groups from the TAPZ microspheres accelerate the DGEBA-TA reaction through enhancing interfacial reaction between residual epoxide groups of the cured epoxy network. Overall, these results present a promising approach to the development of a highly fire retardant, high performance, and highly bio-derived epoxy network and composite.

L-DOPA Autoxidation: An Empirical Valence Bond Simulation of the Reactive Step.

L-DOPA, or levodopa, plays an important role in the treatment of Parkinson's disease, a debilitating neurological disorder. It acts as a precursor to dopamine, a neurotransmitter crucial for the regulation of motor functions. Administered orally, L-DOPA easily crosses the blood-brain barrier and converts into dopamine in the brain, relieving symptoms such as tremors and rigidity. However, its prolonged use can lead to complications. A significant concern with L-DOPA is its conversion to dopaquinone, a quinone metabolite that enters the redox cycle and continuously produces hydrogen peroxide. In addition, L-DOPA, which resembles tyrosine with an additional hydroxyl group, can randomly incorporate into the proteins of dopaminergic neurons and thus become an additional source of oxidative stress in Parkinson's patients. In this study, we scrutinized the rate-limiting step of L-DOPA autoxidation in aqueous solution. The reaction we studied is an intramolecular Michael addition concerted with a proton transfer from the amino group. Using the Empirical Valence Bond (EVB) method, we computed the free energy profiles of the reaction in water. The calculated barrier of 30.93 ± 1.12 kcal/mol is in reasonable agreement with the experimental barrier of 27.55 kcal/mol. This agreement confirms the validity of the studied mechanism and demonstrates the applicability of our simulation methodology for studying the autoxidation kinetics of L-DOPA within proteins.

Human phase-I metabolism of three synthetic cannabinoids bearing a cumyl moiety and a cyclobutyl methyl or norbornyl methyl tail: Cumyl-CBMEGACLONE, Cumyl-NBMEGACLONE, and Cumyl-NBMINACA.

Synthetic cannabinoid receptor agonists (SCRAs) continue to show high prevalence on the new psychoactive substances drug market. Around 2019-2020, new SCRAs bearing a cumyl moiety emerged: Cumyl-CBMEGACLONE and Cumyl-NBMEGACLONE, carrying a cyclobutyl methyl (CBM) and a norbornyl methyl moiety (NBM) attached to the γ-carbolinone core. These were followed by Cumyl-NBMINACA, the indazole carboxamide analog of Cumyl-NBMEGACLONE. The study aimed at evaluating the human phase-I metabolism of these compounds and at identifying suitable urinary markers to prove their consumption. After enzymatic hydrolysis, 14 authentic urine samples (eight for Cumyl-CBMEGACLONE, four for Cumyl-NBMEGACLONE, and two for Cumyl-NBMINACA) were analyzed by liquid chromatography-quadrupole time-of-flight mass spectrometry. Results were compared with in vitro metabolites generated by pooled human liver microsomes incubation. Fifteen human phase-I metabolites were identified for Cumyl-CBMEGACLONE, nine for Cumyl-NBMEGACLONE, and thirteen for Cumyl-NBMINACA. The main in vivo metabolites were built by monohydroxylation, dihydroxylation, or trihydroxylation. The following urinary biomarkers are suggested for detecting the consumption of the investigated SCRAs: products of monohydroxylation at the CBM and at the core for Cumyl-CBMEGACLONE; two products of monohydroxylation at the norbonyl methyl tail for Cumyl-NBMEGACLONE; and metabolites built by dihydroxylation at the NBM substructure and by an additional hydroxylation at the cumyl moiety for Cumyl-NBMINACA.

Wettability of anatase TiO2 surface: Effect of niobium doping

The effect of niobium doping on the hydrophilic behavior of anatase TiO2 surface was demonstrated on a series of x-Nb-TiO2 nanocoatings with dopant concentrations in the range of 0.0 - 1.0 at.% Nb. Thin films prepared on glass substrates from sols by dip-coating were characterized by tensiometric, work function and isoelectric point measurements along with FT-IR spectroscopy in situ method. Using macroscopic and microscopic techniques, it was found that, at low doping level, it is the functionalization of the anatase surface with niobium ions that leads to a drastic change in its surface acid-base as well as electronic properties and, as a consequence, to a sharp increase in the initial surface hydrophilicity. The rearrangement in the hydroxyl‑hydrated layer with the formation of additional hydroxyl groups as a result of surface functionalization has an increased effect on wettability only at low levels of niobium inclusion, whereas with increasing dopant content the electronic factor plays a significant role on the properties of titanium dioxide, including its wettability. The kinetic dependencies of the photoinduced superhydrophilic conversion for all Nb-doped titanium dioxide surfaces were obtained and discussed in terms of proposed mechanism. Both the initial hydrophilic state and the initial rate of photoinduced hydrophilic conversion depend on the Nb concentration in titanium dioxide, while the final UV-induced superhydrophilic state is achieved for all Nb-doped TiO2 regardless of the dopant content.

Comparative performance analysis of mussel-inspired polydopamine, polynorepinephrine, and poly-α-methyl norepinephrine in electrochemical biosensors.

Polydopamine (PDA) has garnered significant interest for applications in biosensors, drug delivery, and tissue engineering. However, similar polycatecholamines like polynorepinephrine (PNE) with additional hydroxyl groups and poly-α-methylnorepinephrine (PAMN) with additional hydroxyl and methyl groups remain unexplored in the biosensing domain. This research introduces three innovative biosensing platforms composed of ternary nanocomposite based on reduced graphene oxide (RGO), gold nanoparticles(Au NPs), and three sister polycatecholamine compounds (PDA, PNE, and PAMN). The study compares and evaluates the performance of the three biosensing systems for the ultrasensitive detection of Mycobacterium tuberculosis (MTB). The formation of the nanocomposites was meticulously examined through UV-Visible, Raman, XRD, and FT-IR studies with FE-SEM and HR-TEM analysis. Cyclic voltammetry and differential pulse voltammetry measurements were also performed to determine the electrochemical characteristics of the modified electrodes. Electrochemical biosensing experiments reveal that the RGO-PDA-Au, RGO-PNE-Au, and RGO-PAMN-Au-based biosensors detected target DNA up to a broad detection range of 0.1 × 10-8 to 0.1 × 10-18M, with a low detection limit (LOD) of 0.1 × 10-18, 0.1 × 10-16, and 0.1 × 10-17M, respectively. The bioelectrodes were proved to be highly selective with excellent sensitivities of 3.62 × 10-4mAM-1 (PDA), 7.08 × 10-4mAM-1 (PNE), and 6.03 × 10-4mAM-1 (PAMN). This study pioneers the exploration of two novel mussel-inspired polycatecholamines in biosensors, opening avenues for functional nanocoatings that could drive further advancements in this field.

Deciphering the interactions between altertoxins and glutenin based on molecular dynamic simulation: inspiration from detection.

Mycotoxin contamination of food has been gaining increasing attention. Hidden mycotoxins that interact with biological macromolecules in food could make the detection of mycotoxins less accurate, potentially leading to the underestimation of the total exposure risk. Interactions of the mycotoxins alternariol (AOH) and alternariol monomethyl ether (AME) with high-molecular glutenin were explored in this study. The recovery rates of AOH and AME (1, 2, and 10 μg kg-1) in three types of grains (rice, corn, and wheat) were relatively low. Molecular dynamics (MD) simulations indicated that AOH and AME bound to glutenin spontaneously. Hydrogen bonds and π-π stacking were the primary interaction forces at the binding sites. Alternariol with one additional hydroxyl group exhibited stronger binding affinity to glutenin than AME when analyzing average local ionization energy. The average interaction energy between AOH and glutenin was -80.68 KJ mol-1, whereas that of AME was -67.11 KJ mol-1. This study revealed the mechanisms of the interactions between AOH (or AME) and high-molecular glutenin using MD and molecular docking. This could be useful in the development of effective methods to detect pollution levels. These results could also play an important role in the evaluation of the toxicological properties of bound altertoxins. © 2024 Society of Chemical Industry.

Evaluating Possible Formation Mechanisms of Criegee Intermediates during the Heterogeneous Autoxidation of Squalene.

Organic molecules in the environment oxidatively degrade by a variety of free radical, microbial, and biogeochemical pathways. A significant pathway is heterogeneous autoxidation, in which degradation occurs via a network of carbon and oxygen centered free radicals. Recently, we found evidence for a new heterogeneous autoxidation mechanism of squalene that is initiated by hydroxyl (OH) radical addition to a carbon-carbon double bond and apparently propagated through pathways involving Criegee Intermediates (CI) produced from β-hydroxy peroxy radicals (β-OH-RO2•). It remains unclear, however, exactly how CI are formed from β-OH-RO2•, which could occur by a unimolecular or bimolecular pathway. Combining kinetic models and multiphase OH oxidation measurements of squalene, we evaluate the kinetic viability of three mechanistic scenarios. Scenario 1 assumes that CI are formed by the unimolecular bond scission of β-OH-RO2•, whereas Scenarios 2 and 3 test bimolecular pathways of β-OH-RO2• to yield CI. Scenario 1 best replicates the entire experimental data set, which includes effective uptake coefficients vs [OH] as well as the formation kinetics of the major products (i.e., aldehydes and secondary ozonides). Although the unimolecular pathway appears to be kinetically viable, future high-level theory is needed to fully explain the mechanistic relationship between CI and β-OH-RO2• in the condensed phase.

A novel cannabinoid in hemp: Isolation by flash chromatography and identification by liquid chromatography high resolution mass spectrometry

A novel and major cannabinoid (epicannabidiol hydrate) present in hemp plants and oils was isolated and characterized by a combination of flash chromatography and liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (LC/Q-TOF-MS). This novel cannabinoid differs from cannabidiol (CBD) by the absence of a double bond in the terpene ring and the presence of an additional hydroxyl group in the same terpene ring. The isolation procedure involved the use of normal phase chromatography with a silica gel preparative column, followed by reversed phase chromatography with a C18 preparative column. In this way, other major cannabinoids present in the samples, such as cannabidiol and Δ9-tetrahydrocannabinol, were separated and the focus was placed on the novel cannabinoid compound. Exact accurate masses were obtained for the compound of interest at m/z = 333.2424 in positive ion mode and m/z = 331.2279 in negative ion mode. Additional MS-MS analysis in negative ion mode revealed the position of the additional hydroxyl group in the molecule. Finally, the structural characterization was corroborated with 1H NMR and 13C NMR analysis, thus verifying the exact chemical structure of this novel cannabinoid, which has not previously been reported in hemp samples.

Multimodal Spectroscopy Assays for Advanced Nano-Optics Approaches by Tuning Nano-Tool Surface Chemistry and Metal-Enhanced Fluorescence

In this research work, different chemical modifications were applied to gold nanoparticles and their use in enhanced non-classical light emitters based on metal-enhanced fluorescence (MEF) was evaluated. In order to achieve this, gold core–shell nanoparticles with silica shells were modified via multilayered addition and the incorporation of a covalently linked laser dye to develop MEF. Their inter-nanoparticle interactions were evaluated by using additional silica shell multilayers and modified cyclodextrin macrocycles. In this manner, the sizes and chemical surface interactions on the multilayered nanoarchitectures were varied. These optical active nanoplatforms led to the development of different nanoassembly sizes and luminescence behaviors. Therefore, the interactions and nanoassembly properties were evaluated by using various spectroscopic and nanoimaging techniques. Highly dispersible gold core–shell nanoparticles with diameters of 50–60 nm showed improved colloidal dispersion that led to single ultraluminescent gold core–shell nanoparticles with MEF. Then, the addition of variable silica lengths produced increased interactions and consequent nanoaggregation. However, the silanized nanoparticles were easily dispersible after agitation or sonication. Thus, their sizes were proportional only to the diameter and the van de Waals interaction did not affect their sizes in bulk. Then, the covalent linking of different concentrations of modified cyclodextrins was applied to the chemical surfaces by incorporating additional hydroxyl groups from the glucose monomeric unities of cyclodextrins. In this manner, variable larger-sized and inter-branched grafted gold core–shell silica nanoparticles were generated. The ultraluminescent properties were conserved due to the non-optical activity of the cyclodextrins. However, they generated enhanced ultraluminescence phenomena. Laser fluorescence microscopy nanoimaging showed enhanced resolutions in comparison to non-grafted supramolecular gold core–shell nanoparticles. The differences in their interactions and the sizes of the nanoassemblies were explained by their single nanoparticle diameters and the interacting chemical groups on their nanosurfaces. While the varied luminescence emissions generated were tuned by plasmonics, enhanced plasmonic phenomena and light scattering properties were seen depending on the type of nanoassembly. Thus, optically active and non-optically active materials led to different optical properties in the bright field and enhanced the excited state within the electromagnetic near-field of the gold nanotemplates. In this manner, it was possible to achieve high sensitivity by varying the spacer lengths and optical properties. Therefore, further perspectives regarding the design of nano-tools composed of light for various applications were discussed.

Design of 3D-Photoprintable, Bio-, and Hemocompatible Nonisocyanate Polyurethane Elastomers for Biomedical Implants.

Polyurethanes (PUs) have adjustable mechanical properties, making them suitable for a wide range of applications, including in the biomedical field. Historically, these PUs have been synthesized from isocyanates, which are toxic compounds to handle. This has encouraged the search for safer and more environmentally friendly synthetic routes, leading today to the production of nonisocyanate polyurethanes (NIPUs). Among these NIPUs, polyhydroxyurethanes (PHUs) bear additional hydroxyl groups, which are particularly attractive for derivatizing and adjusting their physicochemical properties. In this paper, polyether-based NIPU elastomers with variable stiffness are designed by functionalizing the hydroxyl groups of a poly(propylene glycol)-PHU by a cyclic carbonate carrying a pendant unsaturation, enabling them to be post-photo-cross-linked with polythiols (thiol-ene). Elastomers with remarkable mechanical properties whose stiffness can be adjusted are obtained. Thanks to the unique viscous properties of these PHU derivatives and their short gel times observed by rheology experiments, formulations for light-based three-dimensional (3D) printing have been developed. Objects were 3D-printed by digital light processing with a resolution down to the micrometer scale, demonstrating their ability to target various designs of prime importance for personalized medicine. In vitro biocompatibility tests have confirmed the noncytotoxicity of these materials for human fibroblasts. In vitro hemocompatibility tests have revealed that they do not induce hemolytic effects, they do not increase platelet adhesion, nor activate coagulation, demonstrating their potential for future applications in the cardiovascular field.

Silane-crosslinked polybenzimidazole with different hydroxyl content for high-temperature proton exchange membrane

High temperature proton exchange membrane fuel cells (HT-PEMFCs) can operate over 100 °C without humidification, which avoids the catalyst poisoning and enhances the efficiency of the power conversion. However, the classic phosphoric acid (PA) doped polybenzimidazole (PBI) still remains the challenge in the trade-off between mechanical strength and proton conductivity. The γ-(2,3-epoxypropoxy) propyltrimethoxysilane (KH560), as a crosslinking agent, is widely used to improve the mechanical properties of membranes. Although it can enhance the mechanical strength of PBI membranes, it sacrifices the hydrogen of imidazole groups, resulting in a decrease in proton conductivity. In this present work, silane-crosslinked PBI proton exchange membranes (PEMs) were synthesized by the reaction between the pyridine-bridged PBI containing different hydroxyl (-OH) content with KH560. Through comprehensive structural characterization of the polymer and model compound, it has been determined that this crosslinking method does not compromise the N–H acidic sites on the imidazole ring. The crosslinking agent KH560 provides additional hydroxyl groups to PBI and participates in the construction of hydrogen bonding networks after the ring-opening reaction. It was found that the addition of pyridine and hydroxyl groups could promote the phosphoric acid uptake, and the appropriate degree of silane crosslinking could maintain the PBI membranes with reasonable mechanical properties. Proton conductivity and HT-PEMFCs performance of the obtained crosslinked films were further enhanced with the dimensional stability, thermal stability and mechanical properties. Among them, CPyOPBI–OH–20 presented the best overall performance, exhibiting the highest proton conductivity of 0.095 S cm−1 and the maximum power density of 767 mW cm−2 at 180 °C under the anhydrous condition, which was 4.2 times that of OPBI (182 mW cm−2).

Towards Antibacterial Agents: Synthesis and Biological Activity of Multivalent Amide Derivatives of Thiacalix[4]arene with Hydroxyl and Amine Groups.

Antimicrobial resistance to modern antibiotics stimulates the search for new ways to synthesize and modify antimicrobial drugs. The development of synthetic approaches that can easily change different fragments of the molecule is a promising solution to this problem. In this work, a synthetic approach was developed to obtain multivalent thiacalix[4]arene derivatives containing different number of amine and hydroxyl groups. A series of macrocyclic compounds in cone, partial cone, and 1,3-alternate stereoisomeric forms containing -NHCH2CH2R (R = NH2, N(CH3)2, and OH) and -N(CH2CH2OH)2 terminal fragments, and their model non-macrocyclic analogues were obtained. The antibacterial activity against Gram-positive (Staphylococcus aureus, Bacillus cereus, and Enterococcus faecalis) and Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacterial strains and cytotoxicity of the obtained compounds were studied. Structure-activity relationships were established: (1) the macrocyclic compounds had high antibacterial activity, while the monomeric compounds had low activity; (2) the compounds in cone and partial cone conformations had better antibacterial activity compared to the compounds in 1,3-alternate stereoisomeric form; (3) the macrocyclic compounds containing -NHCH2CH2N(CH3)2 terminal fragments had the highest antibacterial activity; (4) introduction of additional terminal hydroxyl groups led to a significant decrease in antibacterial activity; (5) the compounds in partial cone conformation had significant bactericidal activity against all studied cell strains; the best selectivity was observed for the compounds in cone conformation. The mechanism of antibacterial activity of lead compounds with terminal fragments -NHCH2CH2N(CH3)2 was proved using model negatively charged POPG vesicles, i.e., the addition of these compounds led to an increase in the size and zeta potential of the vesicles. The obtained results open up the possibility of using the synthesized macrocyclic compounds as promising antibacterial agents.

Binding Modes of Carnostatine, Homocarnosine, and Ophidine to Human Carnosinase 1.

Carnosine (CAR), anserine (ANS), homocarnosine (H-CAR), and ophidine (OPH) are histidine-containing dipeptides that show a wide range of therapeutic properties. With their potential physiological effects, these bioactive dipeptides are considered as bioactive food components. However, such dipeptides display low stability due to their rapid degradation by human serum carnosinase 1 (CN1). A dimeric CN1 hydrolyzes such histidine-containing compounds with different degrees of reactivities. A selective CN inhibitor, carnostatine (CARN), was reported to effectively inhibit CN's activity. To date, the binding mechanisms of CAR and ANS have been recently reported, while no clear information about H-CAR, OPH, and CARN binding is available. Thus, in this work, molecular dynamics simulations were employed to elucidate the binding mechanism of H-CAR, OPH, and CARN. Among all, the amine end and imidazole ring are the main players for trapping all of the ligands in a pocket. OPH shows the poorest binding affinity, while CARN displays the tightest binding. Such firm binding is due to the longer amine chain and the additional hydroxyl (-OH) group of CARN. H-CAR and CARN are analogous, but the absence of the -OH moiety in H-CAR significantly enhances its mobility, resulting in the reduction in binding affinity. For OPH which is an ANS analogue, the methylated imidazole ring destroys the OPH-CN1 interaction network at this region, consequentially leading to the poor binding ability. An insight into how CN recognizes and binds its substrates obtained here will be useful for designing an effective strategy to prolong the lifetime of CAR and its analogues after ingestion.