Adaptive Dynamic Surface Control Research Articles

An adaptive dynamic surface control strategy for suppressing pathological oscillations in a neural mass model

Pathological oscillations that have a frequency in the [Formula: see text] band are widely recognized to be involved in Parkinson’s disease. Now, we present an adaptive dynamic surface control strategy for suppressing pathological oscillations that exist in the Parkinsonian state. First, the interactions between the subthalamic nucleus and external globus pallidus are fully considered and establish a neural mass model of Parkinson’s disease. Next, by reasonable state transformation, suppressing pathological oscillations can be converted into a tracking control study of a pure-feedback nonlinear system. Moreover, the dynamic surface control technique adopted reduces the dimensionality of the neural network input and effectively eliminates the complexity explosion problem commonly associated with existing methods. By Lyapunov stability analysis, it can be obtained that all the signals of the resulting closed-loop system are bounded, and the tracking error converges to a small neighborhood of zero. Finally, the simulation results demonstrate the effectiveness of the designed control strategy. This work may provide an effective approach to closed-loop deep brain stimulation optimization for the alleviation of the Parkinsonian state.

Filter‐Based Average Dwell‐Time Tuning Approach for Adaptive Prescribed‐Time Tracking of Uncertain Switched Nonlinear Systems

ABSTRACTThis paper addresses neural‐network‐based adaptive prescribed‐time (PT) tracking for uncertain switched systems with unmatched nonlinearities. A continuously switched adaptive tuning mechanism for neural network learning is developed by applying the average dwell time (ADT). First, a neural‐network‐based PT tracking control design strategy using the ADT‐based adaptive tuning mechanism is established for switched nonlinear systems in strict‐feedback form. A novel adaptive dynamic surface controller is designed recursively using a practical finite‐time scaling function and continuously switched tuning parameters. The switched adaptive tuning laws for neural networks are structured to reduce the conservatism associated with common adaptive laws. Then, a filter‐based tuning approach is employed to ensure the continuity of switched adaptive parameters with ADT in the designed controller. The practical PT stability of the closed‐loop system is demonstrated based on the boundedness of the adaptive parameters. Building upon this foundation, the proposed PT design approach is extended to control switched pure‐feedback nonlinear systems, even in cases where control directions are unspecified. The unknown sign problem encountered with switched virtual and actual control coefficient functions is resolved in the PT control framework. It is shown that the PT performance bound of the tracking error can be reduced by selecting the design parameter of the scaling function. Finally, simulation results illustrate the merits of the proposed theoretical approach.

Robust adaptive asymmetric state constraint control of brush DC motor systems driving a one-link robot manipulator: A feasibility-condition-free method

In this paper, we investigate the tracking control problem for a class of brush direct current (DC) motor systems driving a one-link robot manipulator subject to asymmetric full-state constraints. By constructing a state-dependent nonlinear transformation function (NTF), we present an adaptive robust dynamic surface control (DSC) strategy that can directly address both symmetric and asymmetric state constraints, so that there is no need to convert the problem of state constraint into the constraints on tracking errors as necessitated by the Barrier Lyapunov Function (BLF)-based existing works. Furthermore, by employing the first-order filter and constructing a new coordinate transformation, the demanding feasibility condition imposed on the BLF methods is removed, allowing the designer more freedom to select design parameters. Moreover, it is worth mentioning that under the proposed nonlinear transformation function the extra condition on the constraining function is not required. The effectiveness of the proposed control is verified via the Simulation results.

Neural learning control for sampled‐data nonlinear systems based on Euler approximation and first‐order filter

AbstractThe primary focus of this research paper is to explore the realm of dynamic learning in sampled‐data strict‐feedback nonlinear systems (SFNSs) by leveraging the capabilities of radial basis function (RBF) neural networks (NNs) under the framework of adaptive control. First, the exact discrete‐time model of the continuous‐time system is expressed as an Euler strict‐feedback model with a sampling approximation error. We provide the consistency condition that establishes the relationship between the exact model and the Euler model with meticulous detail. Meanwhile, a novel lemma is derived to show the stability condition of a digital first‐order filter. To address the non‐causality issues of SFNSs with sampling approximation error and the input data dimension explosion of NNs, the auxiliary digital first‐order filter and backstepping technology are combined to propose an adaptive neural dynamic surface control (ANDSC) scheme. Such a scheme avoids the ‐step time delays associated with the existing NN updating laws derived by the common ‐step predictor technology. A rigorous recursion method is employed to provide a comprehensive verification of the stability, guaranteeing its overall performance and dependability. Following that, the NN weight error systems are systematically decomposed into a sequence of linear time‐varying subsystems, allowing for a more detailed analysis and understanding. In order to ensure the recurrent nature of the input variables, a recursive design is employed, thereby satisfying the partial persistent excitation condition specifically designed for the RBF NNs. Meanwhile, it can verify that the NN estimated weights converge to their ideal values. Compared with the common ‐step predictor technology, there is no need to redesign the learning rules due to the designed NN weight updating laws without time delays. Subsequently, after capturing and storing the convergence weights, a novel neural learning dynamic surface control (NLDSC) scheme is specifically formulated by leveraging the acquired knowledge. The introduced methodology reduces computational complexity and facilitates practical implementation. Finally, empirical evidence obtained from simulation experiments validates the efficacy and viability of the proposed methodology.

Finite-time adaptive NN dynamic surface control for nonstrict nonlinear FOSs subject to input dead-zone and full-states constraints

This article focuses on a kind of nonstrict nonlinear fractional-order systems (FOSs) suffering from state constraints and dead-zone input. Meanwhile, a finite-time adaptive dynamic surface control (DSC) approach based on backstepping technology and approximation principle of radial basis function neural network (RBFNN) is developed. To overcome the problem of inherent computational complexity, a fractional-order filter is applied to approach the virtual controller and its fractional-order derivative in each step of the backstepping procedure. The barrier Lyapunov function (BLF) is employed to handle the state constraints, and finite-time stability criteria on the basis of fractional-order Lyapunov method are introduced to prove the finite-time convergence of the tracking error into a small region around the origin. It is shown that all the solutions of the closed-loop system are bounded, while the state constraints are satisfied within a predetermined finite time. Finally, two examples are provided to demonstrate the effectiveness of the presented control scheme.

Adaptive dynamic‐surface repetitive control for uncertain nonlinear systems with mismatched disturbances and input delay

AbstractBased on additive state decomposition technique, this article presents an adaptive dynamic‐surface repetitive control method for a class of uncertain nonlinear systems with mismatched disturbances and input delay. First, the original uncertain nonlinear system is decomposed into a linear time invariant (LTI) primary system responsible for the periodic signal tracing and rejection task, and a nonlinear secondary system with input time delay responsible for the robust stabilization task. A modified repetitive controller with a small correction to the delay constant is then independently designed for the LTI primary system, while an adaptive dynamic surface controller is designed for the nonlinear secondary system. Stability analysis is performed for each subsystem and the design procedure of the whole system is presented in detail. Finally, comparative simulations with other repetitive control and dynamic surface control methods show that the presented method not only relaxes the constraints on the reference inputs and exogenous disturbances, but also ensures that the system has better disturbance rejection and periodic‐signal tracking performance in both transient and steady states. As a result, this method broadens the application of both repetitive control and dynamic surface control.

Output-Feedback Consensus Maneuvering of Uncertain MIMO Strict-Feedback Multiagent Systems Based on a High-Order Neural Observer.

In this article, a distributed output-feedback consensus maneuvering problem is investigated for a class of uncertain multiagent systems with multi-input and multi-output (MIMO) strict-feedback dynamics. The followers are subject to immeasurable states and external disturbances. A distributed neural observer-based adaptive control method is designed for consensus maneuvering of uncertain MIMO multiagent systems. The method is based on a modular structure, resulting in the separation of three modules: 1) a variable update law for the parameterized path; 2) a high-order neural observer; and 3) an output-feedback consensus maneuvering control law. The proposed distributed neural observer-based adaptive control method ensures that all followers agree on a common motion guided by a desired parameterized path, and the proposed method evades adopting the adaptive backstepping or dynamic surface control design by reformulating the dynamics of agents, thereby reducing the complexity of the control structure. Combined with the cascade system analysis and interconnection system analysis, the input-to-state stability of the consensus maneuvering closed loop is established in the Lyapunov sense. A simulation example is presented to demonstrate the performance of the proposed distributed neural observer-based adaptive control method for output-feedback consensus maneuvering.

Neural adaptive dynamic surface control of an electro-hydraulic loading system for rail grinders

Neural adaptive dynamic surface control of an electro-hydraulic loading system for rail grinders

Adaptive neural dynamic surface control for nonstrict feedback systems with state delays

AbstractThis article focuses on a class of nonstrict feedback systems with input delay, state delays and time‐varying full‐state constraints by proposing an adaptive neural control scheme. To overcome the problems of all state variables effected by time‐varying constraints, the asymmetric time‐varying barrier Lyapunov functions are constructed. The influence of state delays and input delay is eliminated by employing suitable Lyapunov–Krasovskii functionals. Additionally, the process of controller design is based on backstepping method and the unknown functions can be approximated by radial basis function neural networks. Moreover, the problem of repeated differentiations for nonlinear components during controller design is hugely simplified by taking advantage of the dynamic surface control method. The boundness of all the closed‐loop signals can be ensured by the designed controller. Finally, two numerical simulations illustrate that the proposed adaptive neural control scheme is effective.

Neural adaptive dynamic surface control for position tracking of electrohydraulic servo systems based on extended state observer

High-performance motion tracking of electro-hydraulic servo systems plays an important role in developing industrial technology. However, the system itself has parameter uncertainty, uncertain nonlinearity, and measurement noise, significantly decreasing the performance of conventional controllers designed based on nominal models. To improve the tracking performance of electro-hydraulic servo systems, an adaptive dynamic surface control method combining extended state observer and radial basis function neural network is proposed. Firstly, an extended state observer combining neural network output and parameter adaptation technology is designed without the need for speed and pressure feedback to observe the system’s unknown state variables and nonlinear matched disturbance. The design of neural networks is used to approximate mismatched disturbance with significant nonlinearity online. Then, the proposed extended state observer is introduced into the neural adaptive backstepping design, effectively compensating for simultaneous matched and mismatched disturbances, thereby suppressing most of the uncertain nonlinearity of the system. Meanwhile, online update of uncertain parameters further improves the tracking performance of the controller. In addition, the introduction of dynamic surface overcomes the “explosion of complexity” issue in backstepping design. The rigorous stability of the closed-loop system is proved by the Lyapunov stability theory. Finally, the effectiveness of the proposed controller is validated through comparative experiments on valve-controlled hydraulic cylinder.

Practical fixed‐time composite‐learning control for full‐state constraint strict‐feedback non‐linear systems: A dynamic regressor extension and mixing based approach

AbstractA practical fixed‐time composite learning control scheme, by combining dynamic regressor extension and mixing (DREM) parameter identification algorithm and adaptive dynamic surface control (DSC) technique, is proposed for a class of strict‐feedback non‐linear systems subjected to linear‐in‐parameters uncertainties and full‐state constraint. To address the problem of state constraint, a non‐linear transformation function is introduced to convert the originally constrained non‐linear system into an unconstrained one. Meanwhile, the hyperbolic tangent function is employed to avoid singularity issues that often appeared in the traditional fixed‐time (FXT) control designs. In order to relax the requirement of persistency of excitation condition, a modified FXT‐DREM parameter identification approach with an interval excitation condition is constructed by introducing a three‐layer transformation technique derived from the classical DREM algorithm. Then, the modified FXT‐DREM parameter identification algorithm is seamlessly integrated into the adaptive DSC framework, resulting in a composite‐learning control scheme. By employing Lyapunov stability analysis, the fixed‐time convergence of both the parameter estimation error and the trajectory tracking error is proved. Finally, the effectiveness of the proposed design is demonstrated through simulation test.

Adaptive fixed-time dynamic surface tracking control for high-order nonstrict-feedback nonlinear switched systems

This paper considers the adaptive fixed-time neural tracking dynamic surface control (DSC) for high-order nonlinear switched systems. The uncertain nonlinear functions are approximated by neural networks (NNs). And the obstacles of high-order terms are eliminated by the adding a power integrator. A novel fixed-time convergence filter is proposed to refrain from the problem of repeated differentiation of virtual controllers. On the basis of the backstepping control algorithm and the common Lyapunov function (CLF) method, a novel adaptive fixed-time neural DSC strategy is developed. It is proven that the states in the closed-loop system are bounded and the tracking error converges to an area of zero in fixed time. The simulation experiments further verify the feasibility of the mentioned method.

Event-Triggered Adaptive Fuzzy Control for Strict-Feedback Nonlinear FOSs Subjected to Finite-Time Full-State Constraints

In this article, an event-triggered adaptive fuzzy finite-time dynamic surface control (DSC) is presented for a class of strict-feedback nonlinear fractional-order systems (FOSs) with full-state constraints. The fuzzy logic systems (FLSs) are employed to approximate uncertain nonlinear functions in the backstepping process, the dynamic surface method is applied to overcome the inherent computational complexity from the virtual controller and its fractional-order derivative, and the barrier Lyapunov function (BLF) is used to handle the full-state constraints. By introducing the finite-time stability criteria from fractional-order Lyapunov method, it is verified that the tracking error converges to a small neighborhood near the zero and the full-state constraints are satisfied within a predetermined finite time. Moreover, reducing the communication burden can be guaranteed without the occurrence of Zeno behavior, and the example is given to demonstrate the effectiveness of the proposed controller.

Adaptive Neural Network-Based Dynamic Surface Control for a 3-DoF Helicopter

Adaptive Neural Network-Based Dynamic Surface Control for a 3-DoF Helicopter

UDE-based adaptive dynamic surface control for attitude-constrained reusable launch vehicle

UDE-based adaptive dynamic surface control for attitude-constrained reusable launch vehicle

Adaptive dynamic surface control for trajectory tracking of autonomous surface vehicles with input and output constraints

This study aims to address the trajectory tracking control issue of autonomous surface vehicles (ASV) subjected to a constrained input and output. Firstly, combined with the tan-type Barrier Lyapunov Function, the ASV output-constrained controller is designed by an adaptive dynamic surface control technique. Secondly, the constraints on the rudder angle and the shaft speed are determined by introducing the estimation of the intermediate variable and connecting it to the Gaussian error function. Finally, a radial basis function neural network approximates the unknown disturbance's complex part, and Lyapunov stability analysis is used to verify that the proposed control scheme, ensures the error remains within the predefined boundary and that all signals in the system are uniformly and ultimately bounded. The results show that compared with the comparison control method, the proposed scheme's design can suppress the vibration of the state parameter signals and resist unknown interference. This study can restrict the amplitude and frequency of the rudder and the shaft speed to improve the safety of navigation and save energy.

Robust adaptive dynamic surface control of high-order strict feedback systems based on fully actuated system approach

In this study, the authors propose a robust adaptive dynamic surface control method by using the fully actuated system approach for high-order strict-feedback systems (SFSs) with parameter uncertainty and disturbance. Each subsystem of the SFSs is a high-order system with a full actuation structure. In contrast to the traditional first-order state space method, the proposed control method directly treats each high-order subsystem as a whole without transforming it into a first-order system, which is a concise and efficient treatment. By introducing a series of first-order low-pass filters in each step of the design, the high-order derivatives of the virtual control law are obtained, and the complex and multiple derivation operations are transformed into simple algebraic operations. Adaptive control and robust control are combined to address parameter uncertainty and external disturbances in the system. The Lyapunov stability theory is utilised to demonstrate that all signals in the closed-loop system are uniformly ultimately bounded. The system output can effectively track the desired reference signal under specific constraints, and the tracking error can be adjusted by tweaking the parameters to converge to a sufficiently small neighbourhood around zero. Ultimately, the efficiency of the proposed control method is validated through simulations on a flexible joint manipulator system.

Research on Some Control Algorithms to Compensate for the Negative Effects of Model Uncertainty Parameters, External Interference, and Wheeled Slip for Mobile Robot

In this article, the research team systematically developed a method to model the kinematics and dynamics of a 3-wheeled robot subjected to external disturbances and sideways wheel sliding. These models will be used to design control laws that compensate for wheel slippage, model uncertainties, and external disturbances. These control algorithms were developed based on dynamic surface control (DSC). An adaptive trajectory tracking DSC algorithm using a fuzzy logic system (AFDSC) and a radial neural network (RBFNN) with a fuzzy logic system were used to overcome the disadvantages of DSC and expand the application domain for non-holonomic wheeled mobile robots with lateral slip (WMR). However, this adaptive fuzzy neural network dynamic surface control (AFNNDSC) adaptive controller ensures the closed system is stable, follows the preset trajectory in the presence of wheel slippage model uncertainty, and is affected by significant amplitude disturbances. The stability and convergence of the closed-loop system are guaranteed based on the Lyapunov analysis. The AFNNDSC adaptive controller is evaluated by simulation on the Matlab/simulink software R2022b and in a steady state. The maximum position error on the right wheel and left wheel is 0.000572 (m) and 0.000523 (m), and the angular velocity tracking error in the right and left wheels of the control method is 0.000394 (rad/s). The experimental results show the theoretical analysis’ correctness, the proposed controller’s effectiveness, and the possibility of practical applications. Orbits are set as two periodic functions of period T as follows.

Adaptive neural DSC for nonlinear switched systems with prescribed performance and input saturation

This paper solves the problem of an adaptive neural dynamic surface control for a class of uncertain strict-feedback nonlinear systems with guaranteed transient and steady-state performance under arbitrary switchings. First, by utilizing the prescribed performance control, the prescribed tracking control performance can be ensured, while the requirement for the initial error is removed. Second, radial basis function (RBF) neural networks (NNs) are used to handle unknown nonlinear functions, the Gaussian error function is employed to represent a continuous differentiable asymmetric saturation model and the dynamic surface control (DSC) technique is used to overcome the problem of 'explosion of complexity' inherent in the control design. At last, by using the common Lyapunov function method in combination with the backstepping technology, a common adaptive neural controller is constructed. The designed controller overcomes the problem of the over-parameterization, and further alleviates the computational burden. Under the proposed common adaptive controller, all the signals in the closed-loop system are bounded, and the prescribed transient and steady tracking control performance are guaranteed under arbitrary switchings. Simulation studies demonstrate the effectiveness of the proposed method.

Tracking control problem of nonlinear strict-feedback systems with input nonlinearity: An adaptive neural network dynamic surface control method.

In this work, the tracking control problem for a class of nonlinear strict-feedback systems with input nonlinearity is addressed. In response to the influence of input nonlinearity, an auxiliary control system is constructed to compensate for it. To process unknown nonlinear dynamics, radial basis function neural networks (RBFNNs) are introduced to approximate them, and some adaptive updating control laws are designed to estimate unknown parameters. Furthermore, during the dynamic surface control (DSC) design process, first-order low-pass filters are introduced to solve the complexity explosion problems caused by repeated differentiation. After that, an NN-based adaptive dynamic surface tracking controller is proposed to achieve the tracking control. By applying the proposed controller, it can be guaranteed that not only the output of the system can track the desired trajectory, but also that the tracking error can converge to a small neighborhood of zero, while all signals of the closed-loop system are bounded. Finally, the effectiveness of the proposed controller is verified through two examples.