Integrase Active Site Research Articles

Design, synthesis and biological evaluation of indole-2-carboxylic acid derivatives as novel HIV-1 integrase strand transfer inhibitors.

Integrase plays an important role in the life cycle of HIV-1, and integrase strand transfer inhibitors (INSTIs) can effectively impair the viral replication. However, drug resistance mutations have been confirmed to decrease the efficacy of INSTI during the antiviral therapy. Herein, indole-2-carboxylic acid (1) was found to inhibit the strand transfer of integrase, and the indole nucleus of compound 1 was observed to chelate with two Mg2+ ions within the active site of integrase. Through optimization of compound 1, a series of indole-2-carboxylic acid derivatives were designed and synthesized, and compound 17a was proved to markedly inhibit the effect of integrase, with IC50 value of 3.11 μM. Binding mode analysis of 17a demonstrated that the introduced C6 halogenated benzene ring could effectively bind with the viral DNA (dC20) through π-π stacking interaction. These results indicated that indole-2-carboxylic acid is a promising scaffold for the development of integrase inhibitors.

The Discovery of Indole-2-carboxylic Acid Derivatives as Novel HIV-1 Integrase Strand Transfer Inhibitors.

As an important antiviral target, HIV-1 integrase plays a key role in the viral life cycle, and five integrase strand transfer inhibitors (INSTIs) have been approved for the treatment of HIV-1 infections so far. However, similar to other clinically used antiviral drugs, resistance-causing mutations have appeared, which have impaired the efficacy of INSTIs. In the current study, to identify novel integrase inhibitors, a set of molecular docking-based virtual screenings were performed, and indole-2-carboxylic acid was developed as a potent INSTI scaffold. Indole-2-carboxylic acid derivative 3 was proved to effectively inhibit the strand transfer of HIV-1 integrase, and binding conformation analysis showed that the indole core and C2 carboxyl group obviously chelated the two Mg2+ ions within the active site of integrase. Further structural optimizations on compound 3 provided the derivative 20a, which markedly increased the integrase inhibitory effect, with an IC50 value of 0.13 μM. Binding mode analysis revealed that the introduction of a long branch on C3 of the indole core improved the interaction with the hydrophobic cavity near the active site of integrase, indicating that indole-2-carboxylic acid is a promising scaffold for the development of integrase inhibitors.

Design, Synthesis, Docking Study, and Biological Evaluation of 4-hydroxy-2-oxo-1,2-dihydroquinoline-3-carbohydrazide Derivatives as Anti-HIV-1 and Antibacterial Agents.

BackgroundThe emergence of drug resistance to the existing antibacterial and anti-HIV-1 therapeutics has posed an urgent medical need to develop new molecules. We describe in this regard, a series of novel N'-arylidene-4-hydroxy-2-oxo-1,2-dihydroquinoline-3-carbohydrazide derivatives with anti-HIV-1 and antibacterial activities were designed and synthesized in this study.MethodsThe synthesized compounds were evaluated for the blocking of both the IN ST process and cell-based HIV-1 replication. The synthesized compounds were also examined for in vitro antibacterial activities using the minimum inhibitory concentration (MIC) assay.ResultsThe results revealed the moderate antibacterial activity of the synthesized compounds. Moreover, no significant integrase inhibitory and anti-HIV-1 activities were observed for the synthesized compounds at concentrations < 100 µM.ConclusionsAccording to the docking analyses, the orientation of the designed scaffold in the active site of integrase is similar to the other inhibitors of the HIV integrase and can be regarded as an acceptable template for further structural modification to improve potencies.

Design, Synthesis, Docking Study and Biological Evaluation of 4-Hydroxy-2H-benzo[e][1,2]thiazine-3-carboxamide 1,1-dioxide Derivatives as Anti-HIV Agents.

A novel series of benzothiazine-3-carboxamide 1,1-dioxide derivatives by modifying the piroxicam scaffold was designed, synthesized, and evaluated as anti-HIV agents. The 1,2-benzothiazine-3-carboxamide 1,1-dioxide scaffold consists of hydroxy and carboxamide groups as a chelating motif to form an interaction with Mg2+ ions within the integrase active site as a target. Most of the compounds displayed encouraging anti-HIV activity in a cell-based assay. Among them, compounds 13d, 13l and 13m were the most potent with EC50 values ranging from 20-25 µM and SI > 26. Docking study of compounds in integrase active site proposed that the mechanism of action of compounds might be through Mg2+ chelation within integrase active site. The lack of severe cytotoxicity and favorable anti-HIV activity of benzothiazine-3-carboxamide 1,1-dioxide derivatives support further modifications to improve the potency.

4-(1-Benzyl-1H-benzo[d]imidazol-2-yl)-4-oxo-2-butenoic Acid Derivatives: Design, Synthesis and Anti-HIV-1 Activity.

Acquired immunodeficiency syndrome (AIDS) is still an incurable disease with increasing mortality rate. Despite the development of effective FDA-approved anti-HIV drugs, there are some problems due to the growing of resistant viral strands. Therefore, discovery of novel anti-HIV agents is so needed. Integrase, targeted in highly active antiretroviral therapy (HAART), is a crucial enzyme in viral replication. In this study, new benzimidazolyl diketo acid derivatives were designed according to required features for inhibitors of HIV-1 integrase. Designed compounds were synthesized and evaluated for anti-HIV-1 effects. According to the cell-based biological assay’s results, most of the tested compounds demonstrated good anti-HIV-1 activity, ranging from 40-90 µM concentration with no severe cytotoxicity. The most potent compound was 13g with EC50 value of 40 µM and CC50 value of 550 µM. Docking analysis of compound 13g in integrase active site was in good agreement with well-known integrase inhibitors, proposing that anti-HIV-1 potency of compounds may be via integrase inhibition.

Close-up: HIV/SIV intasome structures shed new light on integrase inhibitor binding and viral escape mechanisms.

Integrase strand transfer inhibitors (INSTIs) are important components of drug formulations that are used to treat people living with HIV, and second-generation INSTIs dolutegravir and bictegravir impart high barriers to the development of drug resistance. Reported 10years ago, X-ray crystal structures of prototype foamy virus (PFV) intasome complexes explained how INSTIs bind integrase to inhibit strand transfer activity and provided initial glimpses into mechanisms of drug resistance. However, comparatively low sequence identity between PFV and HIV-1 integrases limited the depth of information that could be gleaned from the surrogate model system. Recent high-resolution structures of HIV-1 intasomes as well as intasomes from a closely related strain of simian immunodeficiency virus (SIV), which were determined using single-particle cryogenic electron microscopy, have overcome this limitation. The new structures reveal the binding modes of several advanced INSTI compounds to the HIV/SIV integrase active site and critically inform the structural basis of drug resistance. These findings will help guide the continued development of this important class of antiretroviral therapeutics.

Design, Synthesis, Molecular Modeling and Anti-HIV Assay of Novel Quinazolinone Incorporated Coumarin Derivatives.

The emergence of drug-resistant viral strains has created the need for the development of novel anti-HIV agents with a diverse structure that targets key enzymes in the HIV lifecycle. Considering the pharmacophore of integrase inhibitors, one of the validated targets for anti-HIV therapy, we designed a quinazolinone incorporated coumarin scaffold to affect HIV. Coumarin is a beta enol ester and also a well-known drug scaffold. Designed structures were prepared using a one-pot three-component reaction from 3-amino-4-hydroxycoumarin, isatoic anhydride and benzaldehyde derivatives. In vitro anti-HIV and cytotoxicity assay indicated that more than half of the compounds had EC50 values lower than 50 µM. Unsubstituted phenyl derivative showed the highest activity and selectivity with an EC50 value of 5 µM and a therapeutic index of 7. Compounds were docked into the integrase active site to investigate the probable mechanism of action. Accordingly, the hydroxyl moiety of coumarin along with the carbonyl of the quinazolinone ring could function as the metal chelating group. Quinazolinone and phenyl groups interact with side chains of IN residues, as well. Here, a novel anti-HIV scaffold is represented for further modification and in-vivo studies.

Structural basis for strand-transfer inhibitor binding to HIV intasomes.

The HIV intasome is a large nucleoprotein assembly that mediates the integration of a DNA copy of the viral genome into host chromatin. Intasomes are targeted by the latest generation of antiretroviral drugs, integrase strand-transfer inhibitors (INSTIs). Challenges associated with lentiviral intasome biochemistry have hindered high-resolution structural studies of how INSTIs bind to their native drug target. Here, we present high-resolution cryo-electron microscopy structures of HIV intasomes bound to the latest generation of INSTIs. These structures highlight how small changes in the integrase active site can have notable implications for drug binding and design and provide mechanistic insights into why a leading INSTI retains efficacy against a broad spectrum of drug-resistant variants. The data have implications for expanding effective treatments available for HIV-infected individuals.

Design, Synthesis, Docking Studies and Biological Activities Novel 2,3- Diaryl-4-Quinazolinone Derivatives as Anti-HIV-1 Agents.

Although major efforts have been devoted to the effective treatment of HIV-1 infection, it has remained one of the leading causes of deaths around the world. So, development of anti-HIV-1 agents featuring novel structure is essential. To synthesize novel quinazolinone derivatives and evaluate their anti-HIV-1 activity. In this study, we designed and synthesized a series of novel 2,3-diaryl-4-quinazolinone derivatives using a one-pot multicomponent reaction. Then, the resulting derivatives were evaluated for anti-HIV-1 activity using Hela cell-based single-cycle replication assay. Most of the compounds showed efficacy against HIV-1 replication and the compound 9c exhibited the highest activity with EC50 value of 37 μM. Docking studies indicated that synthesized compounds can interact with the key residues of the HIV-1 integrase active site. Binding of the most active compound was consistent with the HIV-1 integrase inhibitors. Based on our results, these derivatives represent novel lead compounds for the development of new promising anti-HIV-1 agents.

Efficacies of Cabotegravir and Bictegravir against drug-resistant HIV-1 integrase mutants

BackgroundIntegrase strand transfer inhibitors (INSTIs) are the class of antiretroviral (ARV) drugs most recently approved by the FDA for the treatment of HIV-1 infections. INSTIs block the strand transfer reaction catalyzed by HIV-1 integrase (IN) and have been shown to potently inhibit infection by wild-type HIV-1. Of the three current FDA-approved INSTIs, Dolutegravir (DTG), has been the most effective, in part because treatment does not readily select for resistant mutants. However, recent studies showed that when INSTI-experienced patients are put on a DTG-salvage therapy, they have reduced response rates. Two new INSTIs, Cabotegravir (CAB) and Bictegravir (BIC), are currently in late-stage clinical trials.ResultsBoth CAB and BIC had much broader antiviral profiles than RAL and EVG against the INSTI-resistant single, double, and triple HIV-1 mutants used in this study. BIC was more effective than DTG against several INSTI-resistant mutants. Overall, in terms of their ability to inhibit a broad range of INSTI-resistant IN mutants, BIC was superior to DTG, and DTG was superior to CAB. Modeling the binding of CAB, BIC, and DTG within the active site of IN suggested that the “left side” of the INSTI pharmacophore (the side away from the viral DNA) was important in determining the ability of the compound to inhibit the IN mutants we tested.ConclusionsOf the two INSTIs in late stage clinical trials, BIC appears to be better able to inhibit the replication of a broad range of IN mutants. BIC retained potency against several of the INSTI-resistant mutants that caused a decrease in susceptibility to DTG.

HIV-1 Resistance to Dolutegravir Is Affected by Cellular Histone Acetyltransferase Activity.

Integrase strand transfer inhibitors (INSTIs) are the newest class of antiretrovirals to be approved for the treatment of HIV infection. Canonical resistance to these competitive inhibitors develops through substitutions in the integrase active site that disrupt drug-protein interactions. However, resistance against the newest integrase inhibitor, dolutegravir (DTG), is associated with an R263K substitution at the C terminus of integrase that causes resistance through an unknown mechanism. The integrase C-terminal domain is involved in many processes over the course of infection and is posttranslationally modified via acetylation of three lysine residues that are important for enzyme activity, integrase multimerization, and protein-protein interactions. Here we report that regulation of the acetylation of integrase is integral to the replication of HIV in the presence of DTG and that the R263K mutation specifically disrupts this regulation, likely due to enhancement of interactions with the histone deacetylase I complex, as suggested by coimmunoprecipitation assays. Although no detectable differences in the levels of cell-free acetylation of the wild-type (WT) and mutated R263K enzymes were observed, the inhibition of cellular histone acetyltransferase enzymes sensitized the NL4.3WT virus to DTG, while NL4.3R263K was almost completely unaffected. When levels of endogenous acetylation were manipulated in virus-producing cells, inhibitors of acetylation enhanced the replication of NL4.3R263K, whereas inhibition of deacetylation greatly diminished the replication of NL4.3WT Taken together, these results point to a pivotal role of acetylation in the resistance mechanism of HIV to some second-generation integrase strand transfer inhibitors, such as DTG.IMPORTANCE This is, to our knowledge, the first report of the influence of posttranslational modifications on HIV drug resistance. Both viral replication and resistance to second-generation integrase strand transfer inhibitors of both WT and INSTI-resistant HIV strains were differentially affected by acetylation, likely as a result of altered interactions between integrase and the cellular deacetylation machinery. Many "shock and kill" strategies to eradicate HIV manipulate endogenous levels of acetylation in order to reactivate latent HIV. However, our results suggest that some drug-resistant viruses may differentially respond to such stimulation, which may complicate the attainment of this goal. Our future work will further illuminate the mechanisms involved.

Quionolone carboxylic acid derivatives as HIV‐1 integrase inhibitors: Docking‐based HQSAR and topomer CoMFA analyses

Quionolone carboxylic acid derivatives as inhibitors of HIV-1 integrase were investigated as a potential class of drugs for the treatment of acquired immunodeficiency syndrome (AIDS). Hologram quantitative structure-activity relationships (HQSAR) and translocation comparative molecular field vector analysis (topomer CoMFA) were applied to a series of 48 quionolone carboxylic acid derivatives. The most effective HQSAR model was obtained using atoms and bonds as fragment distinctions: cross-validation q2 = 0.796, standard error of prediction SDCV = 0.36, the non-cross-validated r2 = 0.967, non-cross validated standard error SD = 0.17, the correlation coefficient of external validation Qext2 = 0.955, and the best hologram length HL = 180. topomer CoMFA models were built based on different fragment cutting models, with the most effective model of q2 = 0.775, SDCV = 0.37, r2 = 0.967, SD = 0.15, Qext2 = 0.915, and F = 163.255. These results show that the models generated form HQSAR and topomer CoMFA were able to effectively predict the inhibitory potency of this class of compounds. The molecular docking method was also used to study the interactions of these drugs by docking the ligands into the HIV-1 integrase active site, which revealed the likely bioactive conformations. This study showed that there are extensive interactions between the quionolone carboxylic acid derivatives and THR80, VAL82, GLY27, ASP29, and ARG8 residues in the active site of HIV-1 integrase. These results provide useful insights for the design of potent new inhibitors of HIV-1 integrase.

Synthesis of potential HIV integrase inhibitors inspired by natural polyphenol structures

Drawing inspiration from the structural features of some natural polyphenols, the synthesis of two different model compounds as potential inhibitors of HIV integrase (IN) has been described. The former was characterised by a diketo acid (DKA) bioisostere, such as a β-hydroxycarbonyl moiety, between two fragments containing aromatic groups, while in the latter an epoxide linked two polyoxygenated aromatic residues. The moieties present in the structures are thought to function by chelating divalent metal ions on the enzyme catalytic site. Overall, 10 compounds were prepared and some of that submitted to molecular modelling studies (to investigate their interactions with the active site of IN), to metal titration studies (to detect their chelating capability) and to biological assays.

GCN2 phosphorylates HIV-1 integrase and decreases HIV-1 replication by limiting viral integration

GCN2 is a serine/threonine kinase involved in cellular stress response related to amino acid starvation. Previously, we showed that GCN2 interacts with HIV-1 integrase and is activated during HIV-1 infection. Herein, we identified HIV-1 integrase as a previously unknown substrate of GCN2 in vitro with a major site of phosphorylation at residue S255 located in the C-terminal domain of HIV-1 integrase. The underlying mechanism was investigated and it appeared that the integrase active site was required in order for GCN2 to target the integrase residue S255. Moreover, various integrases from other retroviruses (e.g. MLV, ASV) were also recognized as a substrate by GCN2. In cells, HIV-1 lentiviral particles harboring mutation at integrase position 255 were affected in their replication. Preventing phosphorylation resulted in an increase in infectivity that correlated with an increase in viral DNA integration. Infectivity of MLV was also higher in cells knocked-out for GCN2 suggesting a conserved mechanism to control viral replication. Altogether, our data suggest that GCN2 may constitute a general guardian of genome stability by regulating foreign DNA integration and as such be part of the antiviral armamentarium of the cell.

Drug resistant integrase mutants cause aberrant HIV integrations.

Background HIV-1 integrase is the target for three FDA-approved drugs, raltegravir, elvitegravir, and dolutegravir. All three drugs bind at the active site of integrase and block the strand transfer step of integration. We previously showed that sub-optimal doses of the anti-HIV drug raltegravir can cause aberrant HIV integrations that are accompanied by a variety of deletions, duplications, insertions and inversions of the adjacent host sequences.ResultsWe show here that a second drug, elvitegravir, also causes similar aberrant integrations. More importantly, we show that at least two of the three clinically relevant drug resistant integrase mutants we tested, N155H and G140S/Q148H, which reduce the enzymatic activity of integrase, can cause the same sorts of aberrant integrations, even in the absence of drugs. In addition, these drug resistant mutants have an elevated IC50 for anti-integrase drugs, and concentrations of the drugs that would be optimal against the WT virus are suboptimal for the mutants.ConclusionsWe previously showed that suboptimal doses of a drug that binds to the HIV enzyme integrase and blocks the integration of a DNA copy of the viral genome into host DNA can cause aberrant integrations that involve rearrangements of the host DNA. We show here that suboptimal doses of a second anti-integrase drug can cause similar aberrant integrations. We also show that drug-resistance mutations in HIV integrase can also cause aberrant integrations, even in the absence of an anti-integrase drug. HIV DNA integrations in the oncogenes BACH2 and MKL2 that do not involve rearrangements of the viral or host DNA can stimulate the proliferation of infected cells. Based on what is known about the association of DNA rearrangements and the activation of oncogenes in human tumors, it is possible that some of the deletions, duplications, insertions, and inversions of the host DNA that accompany aberrant HIV DNA integrations could increase the chances that HIV integrations could lead to the development of a tumor.Electronic supplementary materialThe online version of this article (doi:10.1186/s12977-016-0305-6) contains supplementary material, which is available to authorized users.

New insights into the interaction between pyrrolyl diketoacids and HIV-1 integrase active site and comparison with RNase H

HIV-1 integrase (IN) inhibitors are one of the most recent innovations in the treatment of HIV infection. The selection of drug resistance viral strains is however a still open issue requiring constant efforts to identify new anti-HIV-1 drugs. Pyrrolyl diketo acid (DKA) derivatives inhibit HIV-1 replication by interacting with the Mg2+ cofactors within the HIV-1 IN active site or within the HIV-1 reverse-transcriptase associated ribonuclease H (RNase H) active site. While the interaction mode of pyrrolyl DKAs with the RNase H active site has been recently reported and substantiated by mutagenesis experiments, their interaction within the IN active site still lacks a detailed understanding. In this study, we investigated the binding mode of four pyrrolyl DKAs to the HIV-1 IN active site by molecular modeling coupled with site-directed mutagenesis studies showing that the DKA pyrrolyl scaffold primarily interacts with the IN amino residues P145, Q146 and Q148. Importantly, the tested DKAs demonstrated good effectiveness against HIV-1 Raltegravir resistant Y143A and N155H INs, thus showing an interaction pattern with relevant differences if compared with the first generation IN inhibitors. These data provide precious insights for the design of new HIV inhibitors active on clinically selected Raltegravir resistant variants. Furthermore, this study provides new structural information to modulate IN and RNase H inhibitory activities for development of dual-acting anti-HIV agents.

A targeted DNA substrate mechanism for the inhibition of HIV-1 integrase by inhibitors with antiretroviral activity.

We recently reported that viral DNA could be the primary target of raltegravir (RAL), an efficient anti‐HIV‐1 drug, which acts by inhibiting integrase. To elucidate this mechanism, we conducted a comparative analysis of RAL and TB11, a diketoacid abandoned as an anti‐HIV‐1 drug for its weak efficiency and marked toxicity, and tested the effects of the catalytic cofactor Mg2+ (5 mm) on drug‐binding properties. We used circular dichroism and fluorescence to determine drug affinities for viral DNA long terminal repeats (LTRs) and peptides derived from the integrase active site and DNA retardation assays to assess drug intercalation into DNA base pairs. We found that RAL bound more tightly to LTR ends than did TB11 (a diketo acid bearing an azido group) and that Mg2+ significantly increased the affinity of both RAL and TB11. We also observed a good relationship between drug binding with processed LTR and strand transfer inhibition. This unusual type of inhibition was caused by Mg2+‐assisted binding of drugs to DNA substrate, rather than to enzyme. Notably, while RAL bound exclusively to the cleavable/cleaved site, TB11 further intercalated into DNA base pairs and interacted with the integrase‐derived peptides. These unwanted binding sites explain the weaker bioavailability and higher toxicity of TB11 compared with the more effective RAL.

Anti-HIV-1 integrase compounds from Dioscorea bulbifera and molecular docking study

Context Dioscorea bulbifera L. (Dioscoreaceae) has been used in a traditional Thai longevity medicine preparation. Isolation of inhibitors from natural products is a potential source for continuous development of new HIV-1 integrase (IN) inhibitors.Objective The objective of this study is to isolate the compounds and evaluate their anti-HIV-1 IN activity, as well as to predict the potential interactions of the compounds with an IN.Materials and methods The ethyl acetate and water fractions (1–100 μg/mL) of Dioscorea bulbifera bulbils were isolated and tested for their anti-HIV-1 IN activity using the multiplate integration assay (MIA). The interactions of the active compounds with IN were investigated using a molecular docking method.Results and discussions The ethyl acetate and water fractions of Dioscorea bulbifera bulbils afforded seven compounds. Among these, allantoin (1), 2,4,3′,5′-tetrahydroxybibenzyl (2), and 5,7,4′-trihydroxy-2-styrylchromone (5) were isolated for the first time from this plant. Myricetin (4) exhibited the most potent activity with an IC50 value of 3.15 μM, followed by 2,4,6,7-tetrahydroxy-9,10-dihydrophenanthrene (3, IC50 value= 14.20 μM), quercetin-3-O-β-d-glucopyranoside (6, IC50 value = 19.39 μM) and quercetin-3-O-β-d-galactopyranoside (7, IC50 value = 21.80 μM). Potential interactions of the active compounds (3, 4, 6, and 7) with the IN active site were additionally investigated. Compound 4 showed the best binding affinity to IN and formed strong interactions with various amino acid residues. These compounds interacted with Asp64, Thr66, His67, Glu92, Asp116, Gln148, Glu152, Asn155, and Lys159, which are involved in both the 3′-processing and strand transfer reactions of IN. In particular, galloyl, catechol, and sugar moieties were successful inhibitors for HIV-1 IN.

Kuwanon-L as a New Allosteric HIV-1 Integrase Inhibitor: Molecular Modeling and Biological Evaluation.

HIV-1 integrase (IN) active site inhibitors are the latest class of drugs approved for HIV treatment. The selection of IN strand-transfer drug-resistant HIV strains in patients supports the development of new agents that are active as allosteric IN inhibitors. Here, a docking-based virtual screening has been applied to a small library of natural ligands to identify new allosteric IN inhibitors that target the sucrose binding pocket. From theoretical studies, kuwanon-L emerged as the most promising binder and was thus selected for biological studies. Biochemical studies showed that kuwanon-L is able to inhibit the HIV-1 IN catalytic activity in the absence and in the presence of LEDGF/p75 protein, the IN dimerization, and the IN/LEDGF binding. Kuwanon-L also inhibited HIV-1 replication in cell cultures. Overall, docking and biochemical results suggest that kuwanon-L binds to an allosteric binding pocket and can be considered an attractive lead for the development of new allosteric IN antiviral agents.

6,7-Dihydroxyisoindolin-1-one and 7,8-Dihydroxy-3,4-Dihydroisoquinolin- 1(2H)-one Based HIV-1 Integrase Inhibitors.

Integrase (IN) is an essential viral enzyme required for HIV-1 replication, which has been targeted by anti-AIDS therapeutics. Integrase strand transfer inhibitors (INSTIs) represent a new class of antiretroviral agents developed for the treatment of HIV-1 infections. Important structural features that are shared by many INSTIs include a coplanar arrangement of three heteroatoms that chelate two catalytic Mg(2+) ions in the IN active site and a linked halophenyl ring that binds in the hydrophobic pocket formed by the complex of IN with viral DNA. We recently reported bicyclic 6,7-dihydroxyoxoisoindolin-1-one-based IN inhibitors. In the current study, we modified these inhibitors in three ways. First, we increased the spacer length between the metalchelating triad and the halophenyl group. Second, we replaced the indoline [5,6] bicycle with a fused dihydroxyisoquinolinones [6,6] ring system. Finally, we prepared bis-6,7-dihydroxyisoindolin-1-one-4-sulfonamides as dimeric HIV-1 IN inhibitors. These new analogues showed low micromolar inhibitory potency in in vitro HIV-1 integrase assays.