Active Radiation Transmittance Research Articles

Rootstock vigor dictates the canopy light environment that regulates metabolite profile and internal fruit quality development in peach

Five rootstock cultivars of differing vigor: vigorous (‘Atlas™’ and ‘Bright's Hybrid® 5’), standard (‘Krymsk® 86’ and ‘Lovell’) and dwarfing (‘Krymsk® 1’) grafted with ‘Redhaven’ as the scion were studied for their impact on productivity, mid-canopy photosynthetic active radiation transmission (i.e., light availability) and internal fruit quality. Αverage yield (kg per tree) and fruit count increased significantly with increasing vigor (trunk cross sectional area, TCSA). Α detailed peach fruit quality analysis on fruit of equal maturity (based on the index of absorbance difference, IAD) coming from trees with equal crop load (no. of fruit cm−2 of TCSA) characterized the direct impact of rootstock vigor on peach internal quality [dry matter content (DMC) and soluble solids concentration (SSC)]. DMC and SSC increased significantly with decreasing vigor and increasing light availability, potentially due to reduced intra-tree shading and better light distribution within the canopy. Physiologically characterized peach fruit mesocarp was further analyzed by non-targeted metabolite profiling using gas chromatography mass spectrometry (GC-MS). Metabolite distribution was associated with rootstock vigor class, mid-canopy light availability and fruit quality characteristics. Fructose, glucose, sorbose, neochlorogenic and quinic acids, catechin and sorbitol were associated with high light environments and enhanced quality traits, while sucrose, butanoic and malic acids related to low light conditions and inferior fruit quality. These outcomes show that while rootstock genotype and vigor are influencing peach tree productivity and yield, their effect on manipulating the light environment within the canopy also plays a significant role in fruit quality development.

Luminescent quantum dot films improve light use efficiency and crop quality in greenhouse horticulture.

The spectral quality of sunlight reaching plants remains a path for optimization in greenhouse cultivation. Quantum dots represent a novel, emission-tunable luminescent material for optimizing the sunlight spectrum in greenhouses with minimal intensity loss, ultimately enabling improved light use efficiency of plant growth without requiring electricity. In this study, greenhouse films containing CuInS2/ZnS quantum dots were utilized to absorb and convert ultraviolet and blue photons from sunlight to a photoluminescent emission centered at 600nm. To analyze the effects of the quantum dot film spectrum on plant production, a 25-week tomato trial was conducted in Dutch glass greenhouses. Plants under the quantum dot film experienced a 14% reduction in overall daily light integral, resulting from perpendicular photosynthetically active radiation transmission of 85.3%, mainly due to reflection losses. Despite this reduction in intensity, the modified sunlight spectrum and light diffusion provided by the quantum dot film gave rise to 5.7% improved saleable production yield, nearly identical total fruiting biomass production, 23% higher light use efficiency (g/mol), 10% faster vegetative growth rate, and 36% reduced tomato waste compared to the control, which had no additional films. Based on this result, materials incorporating quantum dots show promise in enabling passive, electricity-free spectrum modification for improving crop production in greenhouse cultivation, but extensive controlled crop studies are needed to further validate their effectiveness.

Tussock and tiller population dynamics on rotationally stocked Piatã palisadegrass (

Context Integrated crop–livestock–forestry systems can be an alternative to monoculture pastures; however, the effect of the arboreal component on tillering and tussock dynamics of understorey grass canopy is not well understood. Aims Our objective was to evaluate the patterns of tillering dynamics, population stability and tussock distribution of Piatã palisadegrass (Urochloa brizantha) as affected by contrasting shading regimes in the Brazilian Amazon biome. Methods The following three shading regimes were assessed: pasture with no trees (no shading, NS), moderate shading (MS, 338 trees ha−1), and intense shading (IS, 714 trees ha−1). Pastures were rotationally grazed by dairy heifers. Paddocks from MS and IS were stratified into three sampling strips, including two closer to the tree rows (i.e. lateral) and one between the two lateral strips (i.e. central). Two methods for monitoring sward canopy light interception (LI) were used for IS regime, namely, LI taken under the tree canopy (i.e. inside) and LI was taken above the tree canopy (i.e. outside). Key results Relative to NS, there was a reduction in photosynthetically active radiation transmittance of 18.1% and 37.1% on MS and 49.9% and 52.0% on IS for central and lateral shading strips respectively. Overall, the increase in shading level was associated with a decrease in average tussock perimeter, tiller population density, and an increase in the frequency of bare ground. Conclusions Our findings clearly indicate the key role of the light environment as a determinant of Piatã palisadegrass horizontal structure. Implications It highlights the importance of planning the levels of tree density and layout in areas of crop–livestock–forestry integration.

Effects of Applied Ratio of Nitrogen on the Light Environment in the Canopy and Growth, Development and Yield of Wheat When Intercropped.

Changes in the light environment have an important effect on crop growth and yield. To clarify the effects of intercropping and the application of nitrogen on the yield of wheat and light within the crop canopy, the relationship between light and yield and their response to nitrogen fertilizer were studied. In a 2-year field experiment, the characteristics of growth, light, biomass, and yield of wheat were measured using three cropping arrangements (monocropped wheat, monocropped faba beans, and intercropped wheat/faba beans) and four levels of applied nitrogen, in groups termed N0 (0 kg/ha), N1 (90 kg/ha), N2 (180 kg/ha), and N3 (270 kg/ha). The results demonstrated that the application of nitrogen fertilizer increased wheat plant height, spike leaf length and width, and the number of leaves while significantly decreasing wheat canopy light transmittance (LT) and canopy photosynthetic active radiation transmittance (PART), by 7.5–71.1 and 12.7–75.1%, respectively. There was a significantly increased canopy photosynthetic active radiation interception rate (IPAR) of 7.5–97.8% and an increase in biomass of 9.6–38.4%, of which IPAR, biomass, and yield were highest at the N2 level. Compared with monocropping, intercropping increased parameters of wheat growth to varying degrees. Intercropping decreased LT and PART by 10.8–46.4 and 15.7–58.7%, respectively, but increased IPAR by 0.1–66.0%, wheat biomass and yield by 7.5–17.4 and 27.7–47.2%, respectively. The mean yield of intercropped wheat increased by 35.8% over 2 years, while the mean land equivalent ratio (LER) was 1.36, for which a values greater than 1 indicates that wheat and faba bean intercropping is advantageous. Correlation analysis demonstrated that there was a very significant negative correlation between wheat LT and yield, while simultaneously demonstrating a very significant positive correlation between PART and IPAR with yield, indicating that the efficient interception and utilization of light energy in intercropping was the basis for the higher biomass and yield of wheat. In summary, wheat/faba bean intercropping and the application of nitrogen at 180 kg/ha were effective in increasing wheat yield.

Compact maize canopy improves radiation use efficiency and grain yield of maize/soybean relay intercropping system.

Maize/soybean relay intercropping system is a popular cultivation system to obtain high yields of both crops with reduced inputs. However, shading by maize decreases the photosynthetically active radiation, reaching the soybean canopy in maize/soybean relay intercropping system, which reduces soybean radiation use efficiency and competitiveness. Here, we reveal that compact maize in maize/soybean relay intercropping system enhances the photosynthetically active radiation transmittance, leaf area index, dry matter production, radiation use efficiency, and competitiveness of soybean and compensates the slight maize yield loss by substantially increasing soybean yield. In this experiment, soybean was relay intercropped with different maize types (SI, spreading maize; SII, semi-compact maize; and SIII, compact maize) in maize/soybean relay intercropping system, and all the relay intercropping treatments were compared with sole cropping systems of soybean and maize. Results revealed that SIII significantly enhanced the soybean radiation use efficiency (by 77%, from 0.35 g MJ-1 in SI to 0.61 g MJ-1 in SIII) and total radiation use efficiency (soybean radiation use efficiency + maize radiation use efficiency) of maize/soybean relay intercropping system (by 5%, from 3.53 g MJ-1 in SI to 3.73 g MJ-1 in SIII). Similarly, SIII improved the competitiveness (by 62%, from 0.58% in SI to 0.94% in SIII) of soybean but reduced the competitiveness (by 38%, from 1.73% in SI to 1.07% in SIII) of maize, which, in turn, considerably increased soybean yield by maintaining maize yield. On average, over the 2 years, in SIII, relay-intercropped soybean produced 89% of the sole soybean yield, and relay-intercropped maize produced 95% of the sole maize yield. Besides, treatment SIII achieved the mean highest land equivalent ratio value of 1.84 in both years. Thus, enhanced radiation use efficiency of soybean, especially during the co-growth period, was the primary factor responsible for the high productivity of the maize/soybean relay intercropping system.

Poly(ethylene terephthalate)‐based nanocomposite films as greenhouse covering material: Environmental sustainability, mechanical durability, and thermal stability

AbstractThe environmental sustainability, mechanical durability, and thermal stability of the poly(ethylene terephthalate) (PET)‐based nanocomposite films compared with pure PET were evaluated. The samples were obtained by incorporating 2 wt% of TiO2, SiO2, ZnO nanoparticles (NPs), and an equal mixture of NPs in polymer by melt‐mixing in a twin‐screw extruder. The mechanical properties and hardness of samples were determined by the tensile and the atomic force microscopy‐based nanoindentation tests. The melting, crystallization, and glass transition temperatures of samples were studied by dynamic mechanical thermal analysis and differential scanning calorimetry. The effects of compatibility, dispersity, and hydrophobicity of NPs on the surface morphology, crystallinity, and thermomechanical properties of nanocomposites were studied. The interaction of SiO2NPs with PET chains had a promising effect on the surface morphology, high elastic modulus, dispersibility, crystallinity, and thermostability of the sample. The mixing of ZnO and TiO2NPs improved the UV‐blocking effects, and photostability, while the SiO2and TiO2NPs maintained the thermal properties of the film against UV radiation. The resulting film could be a good candidate as a greenhouse covering material due to its suitable photosynthetically active radiation transmittance.

Modeling the Interaction of Plastic Film Mulch and Potato Canopy Growth with Soil Heat Transport in a Semiarid Area

Plastic film mulch is an important agricultural technology to reduce water evaporation and modify the soil thermal conditions for crop production. The optical properties of plastic film mulch and the crop canopy growth are both key factors impacting soil heat transport in the soil-film-canopy-atmosphere ecosystem. In this study, a process-oriented model was developed to better understand the interaction among the plastic film mulch, potato (Solanum tuberosum L.) canopy growth, and soil thermal conditions. Canopy growth, photosynthetically active radiation transmittance, net radiation, soil heat flux, and temperature were monitored in a two-year plastic mulch field experiment in Wuwei (Gansu Province, China). Results showed that the simulation of daily soil surface temperature had a good performance with 2.8 and 1.5 °C of root mean square error (RMSE) for the transparent film mulch (TM) and black film mulch (BM), respectively. Moreover, the simulation of the daily net radiation and soil heat flux model indicated reasonable fluctuations with potato phenological development with the daily R2 ranging from 0.89 to 0.98 in 2014 and 2015 for the TM and BM treatments. It was shown that the canopy temperature under BM was greater than that in TM treatment, and the maximum value difference could be up to 7 °C during the early potato growing period, which implied that the BM may perform better in modifying the canopy thermal condition. The model could provide heat distribution information for plastic film choosing in potato field to avoid heat stress.

Growth and development of soybean under changing light environments in relay intercropping system

BackgroundMaize-soybean relay-intercropping (MSR) is a famous system of crop production in developing countries. However, maize shading under this system directly affects the light quality and intensity of soybean canopy. This is a challenging scenario in which to implement the MSR system, in terms of varieties selection, planting pattern, and crop management since the duration of crop resource utilization clearly differs.MethodsTherefore, this experiment aimed to elucidate the effect of leaf excising treatments from maize top to fully clarify the needs and balance of light quality and intensity of intercrop-soybean under MSR in field conditions. The effects of different leaf excising treatments (T0, no removal of leaves; T2, removal of two topmost leaves; T4, removal of four topmost leaves; T6, removal of six topmost leaves from maize plants were applied at first-trifoliate stage (V1) of soybean) on photosynthetically active radiation transmittance (PART), red to far-red ratio (R:FR), morphological and photosynthetic characteristics and total biomass production at second-trifoliate stage (V2), fifth-trifoliate stage (V5), and flowering-stage (R1) of soybean were investigated through field experiments for 2-years under MSR.ResultsAs compared to T0, treatment T6 increased the PART and R:FR ratio at soybean canopy by 77% and 37% (V2), 70% and 34% (V5), and 41% and 36% (R1), respectively. This improved light environment in T6 considerably enhanced the leaf area index, SPAD values and photosynthetic rate of soybean plants by 66%, 25% and 49% at R1, respectively than T0. Similarly, relative to control, T6 also increased the stem diameter (by 29%) but decreased the plant height (by 23%) which in turn significantly increased stem breaking strength (by 87%) by reducing the lodging rate (by 59%) of soybean plants. Overall, under T6, relay-cropped soybean produced 78% of sole soybean seed-yield, and relay-cropped maize produced 81% of sole maize seed-yield. Our findings implied that by maintaining the optimum level of PART (from 60% to 80%) and R:FR ratio (0.9 to 1.1), we can improve morphological and photosynthetic characteristics of soybean plants in MSR. Therefore, more attention should be paid to the light environment when considering the sustainability of MSR via appropriate planting pattern selection.

Animal thermal comfort indexes in silvopastoral systems with different tree arrangements

This study aimed to assess solar radiation transmission and animal thermal comfort indexes in two silvopastoral systems established with different tree arrangements in a tropical region. This study was conducted between 2014 and 2017 in two silvopastoral systems, one composed by an established Urochloa (syn. Brachiaria) decumbens pasture with Brazilian native trees planted in triple rows spaced 17 m apart, and another by an established Urochloa (syn. Brachiaria) brizantha (Hochst ex A. Rich.) Stapf ‘BRS Piatã’ pasture with Eucalyptus urograndis (clone GG100) trees arranged in single rows spaced 15 m apart. In these systems and in a full-sun pasture, photosynthetically active radiation transmission, air temperature, relative humidity, black globe temperature, and wind speed were measured. These variables were used to calculate black globe temperature and humidity index (BGHI) and radiant thermal load (RTL). Higher animal thermal comfort was observed in the silvopastoral systems due to changes in the microclimate induced by the trees; notably, a decrease in solar radiation transmission. Fewer hours of potential animal thermal stress (BGHI>79) were observed in the silvopastoral systems than under the full-sun conditions, with differences up to 3 h per day. The silvopastoral systems presented lower radiant thermal load than the full-sun pasture with differences up to 22% achieved. The assessed silvopastoral systems may help livestock adapt to climate change, since they achieved the limit of BGHI considered to cause stress to animals following an increase of 2.2 °C in air temperature, compared with full-sun pastures.

Polar grid fraction as an estimator of montane tropical forest canopy structure using airborne lidar

The structure of a forest canopy is the key determinant of light transmission, use and understory availability. Airborne light detection and ranging (LiDAR) has been used successfully to measure multiple canopy structural properties, thereby greatly reducing the fieldwork required to map spatial variation in structure. However, lidar metrics to date do not reflect the full extent of the three-dimensional information available from the data. To this end, we developed a new metric, the polar grid fraction (GRID), based on gridding lidar returns in polar coordinates, in order to more closely match measurements provided by field instruments on leaf area index (LAI), gap fraction (GF) and percentage photosynthetically active radiation transmittance (tPAR). The metric summarizes the arrangement of lidar point returns for a single ground location rather than to an area surrounding the location.Compared with more traditional proportion-based and height percentile-based estimators, the GRID estimator increased validation R2 by 14.5% for GF and 6.0% for tPAR over the next best estimator. LAI was still best estimated with the more traditional statistic based on the proportion of ground returns in 14 m × 14 m moving kernels. By applying the models to a 2 × 2 m grid across the lidar coverage area, extreme values occurred in the estimations of all three response variables when using proportion-based and height percentile-based estimators. However, no extreme values were estimated by models using the GRID estimator, indicating that models based on GRID may be less influenced by spurious data. These results suggest that the GRID estimator is a strong candidate for any project requiring estimates of canopy metrics for large areas.

Long-term Effects of Sod Competition on Peach Yield

Excessive vegetative growth in peach (Prunus persica) causes canopy shading that reduces fruit bud initiation in the canopy interior and increases pruning costs and time. Sod competition can reduce pruning but may also reduce yield. The objective of the present study was to measure the effects of increased sod competition [2- vs. 8-ft-wide vegetation-free areas (VFA)] on yield and quality of irrigated peach. Total pruning weight was reduced by sod competition in the first 4 of 7 cropping years. Subsequent years indicated no effect on vegetative growth due to sod competition. Annual increase in trunk cross-sectional area was reduced by sod competition in the first year of cropping and unaffected in subsequent years. Canopy development was reduced by sod competition in the first 2 years of cropping, which increased photosynthetically active radiation transmission through the canopy and increased fruit red color in the first year. The width of the VFA did not alter the relationship between total fruit number and total yield in any year; however, the total number of fruit per tree was reduced in all years and total yield was reduced in 6 of 7 years. Results suggest that dormant season pruning was removing a higher percentage of the crop bearing wood from the 2-ft VFA compared with the 8-ft VFA treatment, resulting in reduced yield per unit of dormant pruning. This indicates that pruning practices must be modified to leave more bearing wood in mature trees to maintain yield potential when sod competition is used to control vegetative growth.

Spatially explicit modeling of PAR transmission and growth of Picea glauca and Abies balsamea in the boreal forests of Alberta and Quebec

To investigate the feasibility of a spatially explicit, radiation-based regeneration model for the boreal forest, we tested the predictions of a three-dimensional simulator of photosynthetically active radiation transmission (%PAR), MIXLIGHT, and the growth response of understory Abies balsamea (L.) Mill. (balsam fir) and Picea glauca (Moench) Voss (white spruce) to %PAR in two large (>1 ha) mixed-species forest sites, one in eastern Canada at Lac Duparquet, Quebec, and one in western Canada at Calling Lake, Alberta. Overstory tree locations and dimensions were obtained from aerial photographs or ground measurements and allometric relationships. Seasonal %PAR calculated by MIXLIGHT for the Calling Lake site was very similar to seasonal %PAR measured by quantum sensors (n = 5, %PAR range = 15%–33%, r = 0.93). Daily measurements of %PAR were also predicted well by simulations at both sites (n = 34–36, %PAR range = 1%–45%, r ≥ 0.76). Functional relationships, designed to saturate at the maximum height growth potential of these sites, were developed to predict sapling height growth from simulated seasonal %PAR and initial height (R2 ≥ 0.74). These results demonstrate the potential of the MIXLIGHT simulator for estimating PAR at microsites within heterogeneous forests and for modeling understory tree growth.

Predicting leaf area index from scaling principles: corroboration and consequences.

Leaf area index (LAI) is a key biophysical variable in most process-based forest-ecosystem models. However, most such models require LAI as an input, typically obtained from empirical observations. We tested whether scaling principles based on trade-offs between single leaf and canopy properties could be effectively used to model LAI, thereby obviating the need for empirical observations. To do so, we used the process-oriented model, PnET, configured to estimate LAI from these same scaling principles. We derived biologically based LAI predictions (LAIPnET) for the Harvard Forest (Massachusetts, USA) eddy covariance tower site, a predominately mixed deciduous hardwood forest, using PnET, and compared these with a locally observed phenology record and with LAI estimates from both local (ground-based) photosynthetically active radiation transmittance (LAITRANS) and normalized difference vegetation index satellite data (LAINDVI). We generated the LAIPnET trajectory by running the PnET model with meteorological observations from the flux tower as model drivers. We derived LAITRANS from measurements of above- and below-canopy photosynthetically active radiation at the flux tower, and LAINDVI from observations from the Advanced Very High Resolution Radiometer (AVHRR) satellite-borne sensor of surface greenness for the 1 km2 cell containing the flux tower. Over a 5-year period, LAIPnET and LAITRANS values were comparable intra- and interannually, with maximum values differing by less than 0.1 to 0.2 LAI units (m2 m(-2)). Values of LAINDVI were similar to LAIPnET and LAITRANS in midsummer, but higher LAI values were predicted in the early and late portions of the growing season. In addition, we used the three alternative LAI trajectories in a modified version of the PnET model and compared the resulting outputs of gross primary production (GPP) with GPP estimates from the flux tower for 5 continuous years. The LAIPnET and LAITRANS inputs resulted in a difference of less than 3% in mean annual GPP from 1995 to 1999, and these were within 7 and 9%, respectively, of the annual eddy flux-based estimates over the same time period. The results indicate that biologically based LAI scaling approaches can closely track temporal changes in a deciduous forest and have potential for spatial and temporal scaling of LAI.

Photosynthetically active radiation transmittance of forest plantation canopies in the Ethiopian highlands

Hemispherical photographs and a quantum sensor were used to study the canopy photosynthetic photon flux density (PPFD) transmittance of five forest plantation species in Ethiopia. Red/far-red (R/FR) ratios and temperatures beneath the forest plantations were also measured. The species studied were: Eucalyptus globulus, Pinus patula, Cupressus lusitanica, Grevillea robusta, and Juniperus procera. The canopies of E. globulus, P. patula and G. robusta transmitted about three times as much PPFD as J. procera or C. lusitanica plantations. Furthermore, plantations of G. robusta and E. globulus had the highest, while J. procera had the lowest R/FR ratio. In contrast to J. procera and C. lusitanica, E. globulus and G. robusta had relatively open crowns, higher crown-bases and lower leaf area indices, and as a result, their canopies had higher PPFD transmittance percentages as well as higher below-canopy R/FR ratios and temperatures. From the perspective of understory light regime, plantations of E. globulus and G. robusta are best suited for promoting the natural regeneration of native species. In general, opening of gaps in plantations of heavy-shading tree species may increase the herbaceous layer ground cover, enhance the colonisation and growth of native woody species and consequently may also increase the floristic diversity of mono-specific plantations.

Transmission of solar radiation in boreal conifer forests: Measurements and models

A combined geometric‐optical and radiative transfer (GORT) model allows incorporation of multiple scales of clustering in conifer canopies on the estimation of radiation transmission. Consideration of clustering of branches into whorls is the latest addition to this model. Modification of the GORT model to include whorl orientation improves the ability to model the observed patterns of solar radiation transmission as a function of solar zenith angle and height in the canopy. Whorl orientation distributions are derived from multidirectional measurements using a geometric optical mutual shadowing model. For BOREAS test stands, model estimates and vertical measurements of photosynthetically active radiation transmittance within the canopy show (1) general decreases in transmission as solar zenith angles increase in the range of solar zenith angles dominated by beam irradiance, (2) increases in PAR transmission at very high solar zenith angles where diffuse skylight is dominant, (3) maximum scattering and absorption occur in the middle of the canopy. Model estimates match measurements from the forest floor, indicating the value of the model for providing radiation inputs to snowmelt models in forested landscapes.

Distance-independent models for predicting photosynthetically active radiation transmission through young forest plant canopies

We developed two distance-independent models for predicting photosynthetically active radiation (PAR) transmission through young forest plant canopies. The two models (model 2, using individual-plant crown area, and model 3, using species cover) were derived from a more complex individual-plant, distance-dependent model (model 1) described in an earlier study. Models 2 and 3 require fewer data inputs and can be used when detailed data on individual plants are not available and (or) spatially explicit predictions of PAR transmission are not of interest. We found close agreement between PAR transmission values between model 1 and models 2 and 3 using data from a plant density study. Mean prediction errors between models 1 and 2 were 0.34% and 1.09% for two plant species studied. Mean prediction errors between models 1 and 3 were 0.77% and 2.58% for the two plant species studied. The extinction coefficients estimated from model 1 were used successfully in models 2 and 3 without additional calibration.

Distance-independent models for predicting photosynthetically active radiation transmission through young forest plant canopies

Distance-independent models for predicting photosynthetically active radiation transmission through young forest plant canopies

Spectral Transmittance of Selected Greenhouse Construction and Nursery Shading Material

Abstract Spectral transmittance properties of several greenhouse construction and shading materials were determined by measuring the quantity and quality of solar radiation transmission on non-clouded (sunny) days at solar noon. Spectral transmittance parameters included photosynthetic radiation (400–700 nm) and photomorphogenic radiation (660 nm (red light), 730 nm (far-red light), and 400–500 nm (blue light). Light available for photosynthesis was measured as photosynthetic photon flux density (PPFD) and photosynthetic radiation (PI). Photomorphogenic radiation was measured as far-red/red (FR/R) and blue light. Greenhouse construction materials included glass, chambered acrylic, chambered polycarbonate, and inflated plastic film. Various shade materials of different colors were evaluated. Photosynthetically active radiation transmission of construction materials ranged from approximately 95% transmission of direct sunlight with Exolite to less than 50% with tinted Lexan. Far-red/red values of shade materials ranged from 0.94 for Enduro Green to 5.58 for Cravo LS-7.

Solar photosynthetically active radiation transmission through greenhouse glazings

One critical factor for crop energy conversion for plant growth is photosynthetically active radiation (PAR) received by the plant. While it is important to know their total solar radiation transmission characteristics in the design of greenhouse for thermal environment management, it is also essential to understand their PAR transmission capability, especially over the winter period for high-latitude regions. This paper presents the results of PAR transmission of four different greenhouse glazings, measured at both the glazing and crop canopy levels. The glazings studied were single glass, double glass, twin-walled acrylic and air-inflated double polyethylene. The first three materials were tested at a commercial rose greenhouse range (gable type) in Connecticut and the double polyethylene greenhouse (bow type) was located at Cook College, Rutgers University. Also reported is the comparison between total solar radiation transmission and PAR transmission in the double polyethylene greenhouse. The glazing level PAR transmission showed mainly the effects of glazing materials, sky clearness and solar angle of incidence, whereas PAR received at the canopy level was strongly influenced by the greenhouse geometric configuration and internal structures. It was found that air-inflated double polyethylene transmitted a higher percentage when measured in the total solar radiation range than in the PAR range.