Carbon Dioxide Activation Research Articles

A Strongly Coupled Metal/Hydroxide Heterostructure Cascades Carbon Dioxide and Nitrate Reduction Reactions toward Efficient Urea Electrosynthesis.

The direct coupling of nitrate ions and carbon dioxide for urea synthesis presents an appealing alternative to the Bosch-Meiser process in industry. The simultaneous activation of carbon dioxide and nitrate, however, as well as efficient C-N coupling on single active site, poses significant challenges. Here, we propose a novel metal/hydroxide heterostructure strategy based on synthesizing an Ag-CuNi(OH)2 composite to cascade carbon dioxide and nitrate reduction reactions for urea electrosynthesis. The strongly coupled metal/hydroxide heterostructure interface integrates two distinct sites for carbon dioxide and nitrate activation, and facilitates the coupling of *CO (on silver, where * denotes an active site) and *NH2 (on hydroxide) for urea formation. Moreover, the strongly coupled interface optimizes the water splitting process and facilitates the supply of active hydrogen atoms, thereby expediting the deoxyreduction processes essential for urea formation. Consequently, our Ag-CuNi(OH)2 composite delivers a high urea yield rate of 25.6 mmol gcat. -1 h-1 and high urea Faradaic efficiency of 46.1 %, as well as excellent cycling stability. This work provides new insights into the design of dual-site catalysts for C-N coupling, considering their role on the interface.

Synergistic catalysis of dual-sites promoted cycloaddition of CO2 with epoxides

This study explores the catalytic efficacy of fluorine-modified 1 wt% copper oxide on MCM-41 (F-1Cu/MCM-41) in carbon dioxide cycloaddition reactions. It delves into reaction mechanisms, active sites, and the practical applicability of the catalyst. Comprehensive examination through in situ diffuse reflectance infrared Fourier transform spectroscopy and other analytical methods substantiated the role of halogen-modified mono-dispersed copper species in carbon dioxide activation and silicon hydroxide sites in epoxide activation, while underscoring the role of Lewis bases and Brønsted acids. Kinetic studies and density functional theory calculations pinpointed carbon dioxide activation as the pivotal step. Furthermore, the catalyst exhibited robust stability and efficiency in continuous flow experiments, sustaining a 99% selectivity towards cyclic carbonate over 150 h. An eco-friendly evaluation confirmed the sustainability of the process, emphasizing its minimal environmental footprint and high efficiency. These results establish fluorine-modified 1 wt% copper oxide on MCM-41 as a formidable candidate for industrial-scale cyclic carbonate production, due to its promising performance and sustainability.

A Strongly Coupled Metal/Hydroxide Heterostructure Cascades Carbon Dioxide and Nitrate Reduction Reactions toward Efficient Urea Electrosynthesis

The direct coupling of nitrate ions and carbon dioxide for urea synthesis presents an appealing alternative to the Bosch–Meiser process in industry. The simultaneous activation of carbon dioxide and nitrate, however, as well as efficient C–N coupling on single active site, poses significant challenges. Here, we propose a novel metal/hydroxide heterostructure strategy based on synthesizing an Ag‐CuNi(OH)2 composite to cascade carbon dioxide and nitrate reduction reactions for urea electrosynthesis. The strongly coupled metal/hydroxide heterostructure interface integrates two distinct sites for carbon dioxide and nitrate activation, and facilitates the coupling of *CO (on silver, where * denotes an active site) and *NH2 (on hydroxide) for urea formation. Moreover, the strongly coupled interface optimizes the water splitting process and facilitates the supply of active hydrogen atoms, thereby expediting the deoxyreduction processes essential for urea formation. Consequently, our Ag‐CuNi(OH)2 composite delivers a high urea yield rate of 25.6 mmol gcat.–1 h–1 and high urea Faradaic efficiency of 46.1%, as well as excellent cycling stability. This work provides new insights into the design of dual‐site catalysts for C–N coupling, considering their role on the interface.

Stabilized Cu0 -Cu1+ dual sites in a cyanamide framework for selective CO2 electroreduction to ethylene

Electrochemical reduction of carbon dioxide to produce high-value ethylene is often limited by poor selectivity and yield of multi-carbon products. To address this, we propose a cyanamide-coordinated isolated copper framework with both metallic copper (Cu0) and charged copper (Cu1+) sites as an efficient electrocatalyst for the reduction of carbon dioxide to ethylene. Our operando electrochemical characterizations and theoretical calculations reveal that copper atoms in the Cuδ+NCN complex enhance carbon dioxide activation by improving surface carbon monoxide adsorption, while delocalized electrons around copper sites facilitate carbon-carbon coupling by reducing the Gibbs free energy for *CHC formation. This leads to high selectivity for ethylene production. The Cuδ+NCN catalyst achieves 77.7% selectivity for carbon dioxide to ethylene conversion at a partial current density of 400 milliamperes per square centimeter and demonstrates long-term stability over 80 hours in membrane electrode assembly-based electrolysers. This study provides a strategic approach for designing catalysts for the electrosynthesis of value-added chemicals from carbon dioxide.

Computational screening of metalloporphyrin catalysts for the activation of carbon dioxide

Electrocatalytic CO2 reduction (eCO2R) to value-added chemicals offers a promising route for carbon capture and utilization. Metalloporphyrin (M-POR) is a class of catalysts for eCO2R that has drawn attention due to its tuneable electronic and structural properties. This work presents a computational screening, based on density functional theory calculations, of one of the key steps in the eCO2R: the adsorption of CO2 on 110 M-PORs with varying peripheral ligands, metal centres, and oxidation states, to understand how these factors can influence CO2 activation. A set of criteria was used to shortlist M-PORs based on their ability to lengthen the C–O bond, bend the O–C–O angle, bind CO2, and donate charge from the metal of the M-POR to the carbon of CO2. 16 systems were selected for their potential to activate CO2. These systems predominantly have the electron configuration of the metal centre in the d[6] and d[7] configurations. Natural bond orbital analysis revealed the impact of electron-withdrawing groups in the system, which increases orbital splitting and, consequently, lowers the ability of the M-POR to activate CO2. Second-order perturbation theory analysis confirms that the presence of electron-donating groups in the ligand structure enhances CO2 activation. This work demonstrates the interconnected effect of peripheral ligands, metal centres, and oxidation states in M-PORs on their ability to adsorb and activate CO2, thereby establishing structure-activity relationships within M-PORs.

Evaluation of the Anti-MRSA Activity of Supercritical Carbon Dioxide and Macerated Crude Extracts of Padina spp. Collected from the Coastal Waters of Tacloban City, the Philippines

The World Health Organization classifies methicillin-resistant Staphylococcus aureus (MRSA) as a high priority in the pathogens list for research and development of new antibiotics. Natural compounds from brown algae are being studied for their potential as alternative sources of antibiotics, including Padina spp. This study aims to evaluate the anti-MRSA activity of the crude extracts obtained through supercritical carbon dioxide extraction (SCCO2) and maceration (MAC) of Padina spp. seaweeds from the coastal waters of Tacloban City, the Philippines. The evaluation of extracts for their anti-MRSA and anti-MSSA (methicillin-susceptible Staphylococcus aureus) activities was done via the resazurin microplate assay, and the Mann-Whitney U test was used to compare these activities. Results show that MAC exhibited minimum inhibitory concentrations (MIC) of 2,048–4,096 μg/mL and 512–4,096 μg/mL for SCCO2 for the MRSA and MSSA control and clinical isolates, respectively. While the MICs for the SCCO2 extracts were lower than those for the MAC extracts, no significant difference was found between the MICs of the extracts from the two extraction methods. No significant difference was observed between the MICs of the extracts against the MRSA (43300) and MSSA (25923) ATCC strains and clinical isolates. Finally, significant differences were observed between the MICs of the control antibiotics and both extraction methods.

Polyoxometalates for carbon dioxide activation: Current progress and perspective

AbstractThe elevated level of carbon dioxide (CO2) in the troposphere is playing a crucial role in changing the earth's climatic system. Excess CO2 concentration is trapping a substantial proportion of heat imparting adverse range of environmental effects like extreme weather events, agricultural impacts and disruption of the ecosystem. Strategies such as CO2 capturing and storage are being pursued using polyoxometalates (POMs) to mitigate the elevated level of CO2 and their efficient conversion into useful chemicals. This review outlines the importance of CO2 reduction by electrocatalytic and photocatalytic reduction of CO2. POMs have several advantages for CO2 activation because of their promising catalytic activity, high selectivity and versatility for incorporating different metal ions and ligands. The efficient redox active metal center facilitates the conversion of CO2 by providing sufficient activation energy. Their robust structure also enables them resist harsh conditions, including high temperature and acidic or basic conditions. Owing to these properties, POMs can be a catalyst, co‐catalyst, photosensitizer or multielectron donor for CO2 reduction. Finally, we stated the challenges and future insight for CO2 activation using POMs.

Multistate Dynamics and Kinetics of CO2 Activation by Ta+ in the Gas Phase: Insights into Single-Atom Catalysis.

The activation of carbon dioxide (CO2) by a transition-metal cation in the gas phase is a unique model system for understanding single-atom catalysis. The mechanism of such reactions is often attributed to a "two-state reactivity" model in which the high-energy barrier of a spin state correlating with ground-state reactants is avoided by intersystem crossing (ISC) to a different spin state with a lower barrier. However, such a "spin-forbidden" mechanism, along with the corresponding dynamics, has seldom been rigorously examined theoretically, due to the lack of global potential energy surfaces (PESs). In this work, we report full-dimensional PESs of the lowest-lying quintet, triplet, and singlet states of the TaCO2+ system, machine-learned from first-principles data. These PESs and the corresponding spin-orbit couplings enable us to provide an extensive theoretical characterization of the dynamics and kinetics of the reaction between the tantalum cation (Ta+) and CO2, which have recently been investigated experimentally at high collision energies using crossed beams and velocity map imaging, as well as at thermal energies using a selected-ion flow tube apparatus. The multistate quasi-classical trajectory simulations with surface hopping reproduce most of the measured product translational and angular distributions, shedding valuable light on the nonadiabatic reaction dynamics. The calculated rate coefficients from 200 to 600 K are also in good agreement with the latest experimental measurements. More importantly, these calculations revealed that the reaction is controlled by intersystem crossing, rather than potential barriers.

Redox- and Charge-State Dependent Trends in 5, 6, and 7-Membered Boron Heterocycles: A Neutral Ligand Coordination Chemistry Approach to Boracyclic Cations, Anions, and Radicals.

ConspectusBoron heterocycles represent an important subset of heteroatom-incorporated rings, attracting attention from organic, inorganic, and materials chemists. The empty pz orbital at the boron center makes them stand out as quintessential Lewis acidic molecules, also serving as a means to modulate electronic structure and photophysical properties in a facile manner. As boracycles are ripe for extensive functionalization, they are used in catalysis, chemical biology, materials science, and continue to be explored as chemical synthons for conjugated materials and reagents. Neutral boron(III)-incorporated polycyclic molecules are some of the most studied types of boracycles, and understanding their redox transformations is important for applications relying on electron transfer and charge transport. While relevant redox species can often be electrochemically observed, it remains challenging to isolate and characterize boracycles where the boron center and/or polycyclic skeleton have been chemically reduced.We describe our recent work isolating 5-, 6-, and 7-membered boracyclic radicals, anions, and cations, focusing on stabilization strategies, ligand-mediated bonding situations, and reactivity. We present a versatile neutral ligand coordination chemistry approach that permits the transformation of boracycles from potent electrophiles to powerful nucleophilic heterocycles that facilitate diverse electron transfer and bond activation chemistry. Although there are a wide range of suitable stabilizing ligands, we have employed both diamino-N-heterocyclic carbenes (NHCs) and cyclic(alkyl)(amino) carbenes (CAACs), which led to boracycles with tunable electronic structures and aromaticity trends. We highlight successful isolation of borafluorene radicals and demonstrate their reversible redox behavior, undergoing oxidation to the cation or reduction to the anion. The borafluorene anion is a chemical synthon that has been used to prepare boryl main-group and transition-metal bonds, luminescent oxabora-spirocycles, borafluorenate-crown ethers, and CO-releasing molecules via carbon dioxide activation. We expanded to 6-membered boracycles and characterized neutral bis(NHC-supported 9-boraphenanthrene)s and the corresponding bis(CAAC-stabilized 9-boraphenanthrene) biradical. We detail the interconvertible multiredox states of boraphenalene, where the boraphenalenyl radical, anion, and cation mimic the charge-states of the all-hydrocarbon analogue. Reactivity studies of the boraphenalenyl anion displayed unusual nucleophilic reactivity at multiple sites on the periphery of the boraphenalenyl tricyclic scaffold. Reduced borepins, 7-membered boron containing heterocycles, have also been isolated. We used a stepwise one-pot synthesis combining the halo-borepin precursor, CAAC, and KC8 to afford the monomeric borepin radicals and anions. The π-system was extended to contain two borepin rings fused in a pentacyclic scaffold, which permitted isolation of diborepin biradicals and a diborepin containing a dibora-quinone core.Our goal is to provide a guide explaining the current structure-function trends and isolation strategies for redox-active boron-incorporated polycyclic molecules to initiate the rational design and use of these types of compounds across a vast chemical space.

Air-Stable Cobalt(III) and Chromium(III) Complexes as Single-Component Catalysts for the Activation of Carbon Dioxide and Epoxides.

Cobalt(III) and chromium(III) salophen chloride complexes were synthesized and tested for the cycloaddition of carbon dioxide (CO2) with epoxides to obtain cyclic carbonates. The cat1, cat2, cat4, and cat5 complexes presented high catalytic activity without cocatalysts and are solvent-free at 100 °C, 8 bar, and 9 h. At these conditions, the terminal epoxides (1a-1k) were successfully converted into the corresponding cyclic carbonates with a maximum conversion of ∼99%. Moreover, cat5 was highlighted due to its capability of opening internal epoxides such as limonene oxide (1l) with a 36% conversion to limonene carbonate (2l), and from cyclohexene oxide (1m), cyclic trans-cyclohexene carbonate (2m) and poly(cyclohexene carbonate) were obtained with 15% and 85% selectivity, respectively. A study of the coupling reaction mechanism was proposed with the aid of electrospray ionization mass spectrometry (ESI-MS) analysis, confirming the single-component behavior of the complexes through their ionization due to epoxide coordination. In addition, crystallographic analysis of cat1 single crystals grown in a saturated solution of pyridine helped to demonstrate that the substitution of chloride ion by pyridine ligands to form an octahedral coordination occurs (Py-cat1), supporting the proposed mechanism. Also, a recyclability study was performed for cat5, and a total turnover number of 952 was obtained with only minor losses in catalytic activity after five cycles.

Preparation of porosity-adjustable porous adsorbent materials derived from coal solid waste

Coal solid waste (CSW) was explored as precursor to prepare porous adsorption material (ACSW) by carbon dioxide activation. The effects of activation method (direct activation and pre-carbonization followed by activation), activation temperature, and activation time were systematically investigated. The burn-off characteristics of the CSW were measured, the ACSW were characterized by field emission scanning electron microscope, gas adsorption instrument and Raman spectrometer, and, in parallel, the adsorption ability was studied using methylene blue (MB) as a typical pollutant. The results showed that compared with direct activation, pre-carbonization reduced the carbon loss, increased the pore volume with pore size less than 1 nm, improved the carbon structural order and increased the MB adsorption performance. In addition, the evolution of the structure of the ACSW strongly depended on the activation temperature and time. With the increase of the activation time, the pore structure evolution underwent three stages: pore forming, expanding, and collapsing. Pore forming mainly involved clearing scattered graphite structures and amorphous carbon. Pore expanding mainly relies on consumption of regular graphite carbon crystal structure. At low temperature of 800 °C, micropores fully developed. As the activation temperature increased to 850–900 °C, pore expansion became apparent, mainly forming pores of 1–5 nm. Moreover, the MB adsorption capacity was positively correlated with the pore volume with pore size less than 5 nm. The burn-off can serve as an indicator for evaluating pore structure and the adsorption performance and when it was ∼25.5 %, the ACSW had the largest pore volume with pore size less than 5 nm and the highest MB adsorption capacity.

Effect of Nitrogen, Carbon Dioxide, and Air Activation on the Low-Temperature Ammonia Removal Performance of Activated Carbon during Nitric Oxide Removal

Effect of Nitrogen, Carbon Dioxide, and Air Activation on the Low-Temperature Ammonia Removal Performance of Activated Carbon during Nitric Oxide Removal

Activation of carbon dioxide on zinc oxide surfaces doped with cerium

AbstractThe adsorption of carbon dioxide on the surfaces of zinc oxide doped with cerium was studied. For this, a theoretical study was carried out using computational simulations based on density functional theory to determine possible improvements in photocatalytic activity. for the capture and dissociation of carbon dioxide. Calculations were performed using density functional theory within the Perdew-Burke-Ernzerhof generalized gradient approximation, also the Hubbard correction together with ultrasmooth atomic pseudopotentials and a basic plane wave implemented in the Quantum-ESPRESSO package. The doping concentration level considered in this work was 6.25%, among the results, the semiconducting character of zinc oxide was evident from the density of states calculations, it was also found that by adding cerium impurities to zinc oxide, the values of the lengths and angles of the bonds vary a little, this may be due to the small difference in covalent radius that the zinc atom has with respect to the cerium atom, consequently, changes occurred in the electronic properties that consist in intermediate states in the energy bandgap located around the Fermi energy. This may suggest that the cerium-doped zinc oxide system can probably absorb visible light, which could lead to possible improvements in the photocatalytic properties of the material. Furthermore, we found that by adding carbon dioxide to the cerium-doped zinc oxide surface, the carbon dioxide is activated and this could suggest the dissociation or reduction of this contaminant.

Synthesis of Cobalt-Based Nanoparticles as Catalysts for Methanol Synthesis from CO2 Hydrogenation.

The increasing emission of carbon dioxide into the atmosphere has urged the scientific community to investigate alternatives to alleviate such emissions, being that they are the principal contributor to the greenhouse gas effect. One major alternative is carbon capture and utilization (CCU) toward the production of value-added chemicals using diverse technologies. This work aims at the study of the catalytic potential of different cobalt-derived nanoparticles for methanol synthesis from carbon dioxide hydrogenation. Thanks to its abundance and cost efficacy, cobalt can serve as an economical catalyst compared to noble metal-based catalysts. In this work, we present a systematic comparison among different cobalt and cobalt oxide nanocomposites in terms of their efficiency as catalysts for carbon dioxide hydrogenation to methanol as well as how different supports, zeolites, MnO2, and CeO2, can enhance their catalytic capacity. The oxygen vacancies in the cerium oxide act as carbon dioxide adsorption and activation sites, which facilitates a higher methanol production yield.

Manganese(I) Catalyzed CO2 Reduction Processes in Homogenous Phase

AbstractThe catalytic activation of carbon dioxide (CO2) can be a promising tool for the use of this abundant, non‐flammable and non‐toxic gas as feedstock for C1 chemical synthesis, in particular for bulk products such as formic acid (HCOOH) and methanol (CH3OH). The key for successful, widespread use of CO2 is the design and application of efficient, thermally robust and cheap catalysts. In the last decade, the use of earth‐abundant transition metal complexes, in particular those of 3d metals, has shown promising results. In this review article, a comprehensive summary of the main catalytic systems described in the literature for homogeneous Mn(I)‐catalyzed CO2 reduction processes (hydrogenation, hydroboration and hydrosilylation) will be described, with particular attention to the effect of stabilizing ligands, reaction conditions and need for additives, together with mechanistic details often obtained by a combination of experimental data and DFT calculations.

Zonal activation of molecular carbon dioxide and hydrogen over dual sites Ni-Co-MgO catalyst for CO2 methanation: Synergistic catalysis of Ni and Co species

An in-depth mechanism in zonal activation of CO2 and H2 molecular over dual-active sites has not been revealed yet. Here, Ni-Co-MgO was rationally constructed to elucidate the CO2 methanation mechanism. The abundant surface nickel and cobalt components as active sites led to strong Ni-Co interaction with charge transfer from nickel to cobalt. Notably, electron-enriched Coδ− species participated in efficient chemisorption and activation of CO2 to generate monodentate carbonate. Simultaneously, plentiful available Ni0 sites facilitated H2 dissociation, thus CO2 and H2 were smoothly activated at zones of Coδ− species and Ni0, respectively. Detailed in situ DRIFTS, quasi situ XPS, TPSR, and DFT calculations substantiated a new formate evolution mechanism via monodentate carbonate instead of traditional bidentate carbonate based on synergistic catalysis of Coδ− species and Ni0. The zonal activation of CO2 and H2 by tuning electron behaviors of double-center catalysts can boost heterogeneous catalytic hydrogenation performance.

Observation of inserted oxocarbonyl species in the tantalum cation-mediated activation of carbon dioxide dictated by two-state reactivity.

Reductive activation of carbon dioxide (CO2) has drawn increasing attention as an effective and convenient method to unlock this stable molecule, especially via transition metal-catalyzed reactions. Taking the [TaC4O8]+ ion-molecule complex formed in the laser ablation source as a representative, the reactivity of the tantalum metal cation towards CO2 molecules is explored using infrared photodissociation spectroscopy combined with quantum chemical calculations. The strong absorption in the carbonyl stretching region provides solid evidence for the insertion reactions into CO bonds by the tantalum cation. Two inserted oxocarbonyl products are identified based on the great agreement between the experimental results and simulated infrared spectra of energetically low-lying structures in the singlet and triplet states. The pivotal role of two-state reactivity in driving CO2 activation among three different spin states is rationalized by potential energy surface analysis. Our conclusion provides valuable insight into the intrinsic mechanisms of CO2 activation by the tantalum metal cation, highlighting the affinity of tantalum for CO bond insertion in addition to typical "end-on" binding configurations.

Cooperative small molecule activation by apolar and weakly polar bonds through the lens of a suitable computational protocol.

Small molecule activation processes are central in chemical research and cooperativity is a valuable tool for the fine-tuning of the efficiency of these reactions. In this contribution, we discuss recent and remarkable examples in which activation processes are mediated by bimetallic compounds featuring apolar or weakly polar metal-metal bonds. Relevant experimental breakthroughs are thoroughly analyzed from a computational perspective. We highlight how the rational and non-trivial application of selected computational approaches not only allows rationalization of the observed reactivities but also inferring of general principles applicable to activation processes, such as the breakdown of the structure-reactivity relationship in carbon dioxide activation in a cooperative framework. We finally provide a simple yet unbiased computational protocol to study these reactions, which can support experimental advances aimed at expanding the range of applications of apolar and weakly polar bonds as catalysts for small molecule activation.

Activation and functionalisation of carbon dioxide by bis-tris(pyrazolyl)borate-supported divalent samarium and trivalent lanthanide silylamide complexes.

Synthesis and reactivity with carbon dioxide (CO2) of divalent samarium in the bis-tris(pyrazolyl)borate ligand environment has been reported. In addition, CO2 activation and functionalisation by lanthanide silylamides in the bis-tris(pyrazolyl)borate ligand environment was demonstrated. Reduction of the Sm(III) precursor [Sm(Tp)2(OTf)] (Tp = hydrotris(1-pyrazolyl)borate; OTf = triflate) with KC8 yielded the insoluble Sm(II) multi-metallic coordination polymer [{Sm(Tp)2}n] 1-Sm. Addition of 1,2-dimethoxyethane (DME) to 1-Sm enabled isolation of the monomeric complex [Sm(Tp)2(DME)] 1-Sm(DME). Complex 1-Sm(DME) reduced CO2 to yield the oxalate-bridged dimeric Sm(III) complex [{Sm(Tp)2}2(μ-η2:η2-O2CCO2)] 2-Sm. The reactions of heteroleptic Ln(III) silylamide complexes [Ln(Tp)2(N'')] (Ln = Y, Sm; N'' = N(SiMe3)2) with CO2 yielded monomeric Ln(III) silyloxides [Ln(Tp)2(OSiMe3)] 3-Ln and trimethylsilyl isocyanate (OCNSiMe3). Complexes 3-Ln are the first crystallographically characterised examples of Ln(III)-OSiMe3 bonds accessed via CO2 activation and functionalisation. Full characterisation data are presented for all complexes, including solid-state molecular structure determination by single-crystal X-ray diffraction.

Visualization of the Two-Phase Flow Behavior Involved in Enhanced Dense Phase Carbon Dioxide Pasteurization by Means of High-Speed Imaging

This research explores the two-phase flow behavior involved in enhanced dense phase carbon dioxide inactivation of E. coli DH5α, which has been shown to possess a high microbial reduction efficiency of up to 3.7 ± 0.4 log. We present an experiment in which the liquid sample was pressurized with liquid carbon dioxide to 8.2 MPa and, after saturation, was forced to flow through a mini tube. An experimental setup was developed to visualize the flow patterns (plug, slug and churn flows) occurring in the mini tube by means of high-speed imaging. The values of the wall shear stress were estimated within the mini tube with the help of the gas slug velocities (8–9 m/s) and were compared with threshold shear stress values reported for the disruption of fresh E. coli cells. The results suggest that the preliminary pressurization phase may cause a substantial destabilization of the cell wall of E. coli DH5α.