Actin-based Motility Of Listeria Monocytogenes Research Articles

Actin-based motility propelled by molecular motors

Actin-based motility of Listeria monocytogenes propelled by filament end-tracking molecular motors has been simulated. Such systems may act as potential nanoscale actuators and shuttles useful in sorting and sensing biomolecules. Filaments are modeled as three-dimensional elastic springs distributed on one end of the capsule and persistently attached to the motile bacterial surface through an end-tracking motor complex. Filament distribution is random, and monomer concentration decreases linearly as a function of position on the bacterial surface. Filament growth rate increases with monomer concentration but decreases with the extent of compression. The growing filaments exert push–pull forces on the bacterial surface. In addition to forces, torques arise due to two factors—distribution of motors on the bacterial surface, and coupling of torsion upon growth due to the right-handed helicity of F-actin—causing the motile object to undergo simultaneous translation and rotation. The trajectory of the bacterium is simulated by performing a force and torque balance on the bacterium. All simulations use a fixed value of torsion. Simulations show strong alignment of the filaments and the long axis of the bacterium along the direction of motion. In the absence of torsion, the bacterial surface essentially moves along the direction of the long axis. When a small amount of the torsion is applied to the bacterial surface, the bacterium is seen to move in right-handed helical trajectories, consistent with experimental observations.

Regulatory Mimicry in Listeria monocytogenes Actin-Based Motility

The actin-based motility of the intracellular pathogen Listeria monocytogenes relies on ActA, a bacterial factor with a structural domain allowing it to mimic the actin nucleation-promoting activity of host cell proteins of the WASP/WAVE family. Here, we used an RNAi-based genetic approach in combination with computer-assisted image analysis to investigate the role of host factors in L. monocytogenes cell-to-cell spread. We showed that the host cell serine/threonine kinase CK2 is required for efficient actin tail formation by L. monocytogenes. Furthermore, CK2-mediated phosphorylation of ActA regulated its affinity for the actin-nucleating ARP2/3 complex, as is the case for CK2-mediated phosphorylation of WASP and WAVE. Thus, ActA not only displays structural mimicry of WASP/WAVE family members, but also regulatory mimicry, having precisely co-opted the host machinery regulating these proteins. Comparisons based on ActA amino acid sequence suggest that unrelated pathogens that display actin-based motility may have evolved a similar strategy of regulatory mimicry.

Mechanics model for actin-based motility

We present here a mechanics model for the force generation by actin polymerization. The possible adhesions between the actin filaments and the load surface, as well as the nucleation and capping of filament tips, are included in this model on top of the well-known elastic Brownian ratchet formulation. A closed form solution is provided from which the force-velocity relationship, summarizing the mechanics of polymerization, can be drawn. Model predictions on the velocity of moving beads driven by actin polymerization are consistent with experiment observations. This model also seems capable of explaining the enhanced actin-based motility of Listeria monocytogenes and beads by the presence of Vasodilator-stimulated phosphoprotein, as observed in recent experiments.

Adapter Protein SH2-Bβ Stimulates Actin-Based Motility of Listeria monocytogenes in a Vasodilator-Stimulated Phosphoprotein (VASP)-Dependent Fashion

SH2-Bbeta (Src homology 2 Bbeta) is an adapter protein that is required for maximal growth hormone-dependent actin reorganization in membrane ruffling and cell motility. Here we show that SH2-Bbeta is also required for maximal actin-based motility of Listeria monocytogenes. SH2-Bbeta localizes to Listeria-induced actin tails and increases the rate of bacterial propulsion in infected cells and in cell extracts. Furthermore, Listeria motility is decreased in mouse embryo fibroblasts from SH2-B(-/-) mice. Both recruitment of SH2-Bbeta to Listeria and SH2-Bbeta stimulation of actin-based propulsion require the vasodilator-stimulated phosphoprotein (VASP), which binds ActA at the surfaces of Listeria cells and enhances bacterial actin-based motility. SH2-Bbeta enhances actin-based movement of ActA-coated beads in a biomimetic actin-based motility assay, provided that VASP is present. In vitro binding assays show that SH2-Bbeta binds ActA but not VASP; however, binding to ActA is greater in the presence of VASP. Because VASP also plays an essential regulatory role in actin-based processes in eukaryotic cells, the present results provide mechanistic insight into the functions of both SH2-Bbeta and VASP in motility and also increase our understanding of the fundamental mechanism by which Listeria spreads.

Biophysical parameters influence actin-based movement, trajectory, and initiation in a cell-free system.

Using a biochemically complex cytoplasmic extract to reconstitute actin-based motility of Listeria monocytogenes and polystyrene beads coated with the bacterial protein ActA, we have systematically varied a series of biophysical parameters and examined their effects on initiation of motility, particle speed, speed variability, and path trajectory. Bead size had a profound effect on all aspects of motility, with increasing size causing slower, straighter movement and inhibiting symmetry-breaking. Speed also was reduced by extract dilution, by addition of methylcellulose, and paradoxically by addition of excess skeletal muscle actin, but it was enhanced by addition of nonmuscle (platelet) actin. Large, persistent individual variations in speed were observed for all conditions and their relative magnitude increased with extract dilution, indicating that persistent alterations in particle surface properties may be responsible for intrinsic speed variations. Trajectory curvature was increased for smaller beads and also for particles moving in the presence of methylcellulose or excess skeletal muscle actin. Symmetry breaking and movement initiation occurred by two distinct modes: either stochastic amplification of local variation for small beads in concentrated extracts, or gradual accumulation of strain in the actin gel for large beads in dilute extracts. Neither mode was sufficient to enable spherical particles to break symmetry in the cytoplasm of living cells.

Effects of Intermediate Filaments on Actin-Based Motility of Listeria monocytogenes

How does subcellular architecture influence the intracellular movements of large organelles and macromolecular assemblies? To investigate the effects of mechanical changes in cytoplasmic structure on intracellular motility, we have characterized the actin-based motility of the intracellular bacterial pathogen Listeria monocytogenes in normal mouse fibroblasts and in fibroblasts lacking intermediate filaments. The apparent diffusion coefficient of L. monocytogenes was two-fold greater in vimentin-null fibroblasts than in wild-type fibroblasts, indicating that intermediate filaments significantly restrict the Brownian motion of bacteria. However, the mean speed of L. monocytogenes actin-based motility was statistically identical in vimentin-null and wild-type cells. Thus, environmental drag is not rate limiting for bacterial motility. Analysis of the temporal variations in speed measurements indicated that bacteria in vimentin-null cells displayed larger fluctuations in speed than did trajectories in wild-type cells. Similarly, the presence of the vimentin meshwork influenced the turning behavior of the bacteria; in the vimentin-null cells, bacteria made sharper turns than they did in wild-type cells. Taken together, these results suggest that a network of intermediate filaments constrains bacterial movement and operates over distances of several microns to reduce fluctuations in motile behavior.

The Arp2/3 complex is essential for the actin-based motility of Listeria monocytogenes

Actin polymerisation is thought to drive the movement of eukaryotic cells and some intracellular pathogens such as Listeria monocytogenes. The Listeria surface protein ActA synergises with recruited host proteins to induce actin polymerisation, propelling the bacterium through the host cytoplasm [1]. The Arp2/3 complex is one recruited host factor [2,3]; it is also believed to regulate actin dynamics in lamellipodia [4,5]. The Arp2/3 complex promotes actin filament nucleation in vitro, which is further enhanced by ActA [6,7]. The Arp2/3 complex also interacts with members of the Wiskott–Aldrich syndrome protein (WASP) [8] family – Scar1 [9,10] and WASP itself [11]. We interfered with the targeting of the Arp2/3 complex to Listeria by using carboxy-terminal fragments of Scar1 that bind the Arp2/3 complex [11]. These fragments completely blocked actin tail formation and motility of Listeria, both in mouse brain extract and in Ptk2 cells overexpressing Scar1 constructs. In both systems, Listeria could initiate actin cloud formation, but tail formation was blocked. Full motility in vitro was restored by adding purified Arp2/3 complex. We conclude that the Arp2/3 complex is a host-cell factor essential for the actin-based motility of L. monocytogenes, suggesting that it plays a pivotal role in regulating the actin cytoskeleton.

VASP moves forward with Listeria

Lew Tilney and Dan Portnoy first described the actin-dependent movement of an intracellular pathogen, the bacterium Listeria monocytogenes. This opened the door for cell biologists and biochemists to study a type of actin polymerization that is similar to that found at the leading edge of human cells.Laurent and colleagues have re-examined the role of vasodilator-stimulated phosphoprotein (VASP) in Listeria movement1xRole of proteins of the Ena/VASP family in actin-based motility of Listeria monocytogenes. Laurent, V. et al. J. Cell Biol. 1999; 144: 1245–1258CrossRef | PubMed | Scopus (230)See all

Gelsolin, a protein that caps the barbed ends and severs actin filaments, enhances the actin-based motility of Listeria monocytogenes in host cells.

The actin-based motility of Listeria monocytogenes requires the addition of actin monomers to the barbed or plus ends of actin filaments. Immunofluorescence micrographs have demonstrated that gelsolin, a protein that both caps barbed ends and severs actin filaments, is concentrated directly behind motile bacteria at the junction between the actin filament rocket tail and the bacterium. In contrast, CapG, a protein that strictly caps actin filaments, fails to localize near intracellular Listeria. To explore the effect of increasing concentrations of gelsolin on bacterial motility, NIH 3T3 fibroblasts stably transfected with gelsolin cDNA were infected with Listeria. The C5 cell line containing 2.25 times control levels of gelsolin supported significantly higher velocities of bacterial movement than did control fibroblasts (mean +/- standard error of the mean, 0.09 +/- 0.003 micro(m)/s [n = 176] versus 0.05 +/- 0.003 micro(m)/s [n = 65]). The rate of disassembly of the Listeria-induced actin filament rocket tail was found to be independent of gelsolin content. Therefore, if increases in gelsolin content result in increases in Listeria-induced rocket tail assembly rates, a positive correlation between gelsolin content and tail length would be expected. BODIPY-phalloidin staining of four different stably transfected NIH 3T3 fibroblast cell lines confirmed this expectation (r = 0.92). Rocket tails were significantly longer in cells with a high gelsolin content. Microinjection of gelsolin 1/2 (consisting of the amino-terminal half of native gelsolin) also increased bacterial velocity by more than 2.2 times. Microinjection of CapG had no effect on bacterial movement. Cultured skin fibroblasts derived from gelsolin-null mice were capable of supporting intracellular Listeria motility at velocities comparable to those supported by wild-type skin fibroblasts. These experiments demonstrated that the surface of Listeria contains a polymerization zone that can block the barbed-end-capping activity of both gelsolin and CapG. The ability of Listeria to uncap actin filaments combined with the severing activity of gelsolin can accelerate actin-based motility. However, gelsolin is not absolutely required for the actin-based intracellular movement of Listeria because its function can be replaced by other actin regulatory proteins in gelsolin-null cells, demonstrating the functional redundancy of the actin system.

Profilin interacts with the Gly-Pro-Pro-Pro-Pro-Pro sequences of vasodilator-stimulated phosphoprotein (VASP): implications for actin-based Listeria motility.

Intracellular actin-based motility of Listeria monocytogenes requires protein-protein interactions involving two different proline-rich sequences: first, the tightly bound bacterial surface protein ActA uses its multiple oligoproline registers [consensus sequence = FE(D)FPPPPTD(E)E(D)] to tether vasodilator-stimulated phosphoprotein (VASP) to the bacterial surface; and second, VASP then deploys its own multiple GPPPPP (or GP5) registers to localize the actin-regulatory protein profilin to promote actin polymerization. We now report that fluorescence titration showed that GP5GP5GP5 peptide binds to profilin (KD of 84 microM), and the peptide weakly inhibits exchange of actin-bound nucleotide in the absence or presence of profilin. Microinjection of synthetic GPPPPP triplet into Listeria-infected PtK2 cells promptly arrested motility at an intracellular concentration of 10 microM. This inhibition was completely neutralized when equimolar concentrations of profilin and GP5GP5GP5 were simultaneously microinjected. Fluorescence studies with [His-133-Ser]-profilin, a site-directed mutant previously shown to be defective in binding poly-l-proline [Bjorkegren, C., Rozycki, M., Schutt, C. E., Lindberg, U., & Karlsson, R. (1993) FEBS Lett. 333, 123-126], exhibits little or no evidence of saturable GP5GP5GP5 binding. When an equimolar concentration of this [His-133-Ser]-profilin mutant was co-injected with GP5GP5GP5, the peptide's inhibitory action remained completely unaffected, indicating that GP5GP5GP5 binding to wild-type profilin represents a key step in actin-based pathogen motility. We also present a model that shows how the focal binding of VASP with its GPPPPP registers can greatly increase the local concentration of profilin and/or profilin-actin-ATP complex at the bacteria/rocket-tail interface.

The amino-terminal part of ActA is critical for the actin-based motility of Listeria monocytogenes; the central proline-rich region acts as a stimulator.

The intracellular bacterial pathogen Listeria monocytogenes moves inside the host-cell cytoplasm propelled by continuous actin assembly at one pole of the bacterium. This process requires expression of the bacterial surface protein ActA. Recently, in order to identify the regions of ActA which are required for actin assembly, we and others have expressed different domains of ActA by transfection in eukaryotic cells. As this type of approach cannot address the role of ActA in the actin-driven bacterial propulsion, we have now generated several L. monocytogenes strains expressing different domains of ActA and analysed the ability of the different domains to trigger actin assembly and bacterial movement in both infected cells and cytoplasmic extracts. We show here that the amino-terminal part is critical for F-actin assembly and movement. The internal proline-rich repeats and the carboxy-terminal domains are not essential. However, in vitro motility assays have demonstrated that mutants lacking the proline-rich repeats domain of ActA moved two times slower (6+/-2 micrometers min(-1)) than the wild type (13 +/-3 micrometers min(-1)). In addition, phosphatase treatment of protein extracts of cells infected with the L. monocytogenes strains expressing the ActA variants suggested that phosphorylation may not be essential for ActA activity.

Actin-based movement of Listeria monocytogenes: actin assembly results from the local maintenance of uncapped filament barbed ends at the bacterium surface.

The thermodynamic basis for actin-based motility of Listeria monocytogenes has been investigated using cytoplasmic extracts of Xenopus eggs, initially developed by Theriot et al. (Theriot, J. A., J. Rosenblatt, D. A. Portnoy, P. J. Goldschmidt-Clermont, and T. J. Mitchison. 1994. Cell. 76:505-517) as an in vitro cell-free system. A large proportion (75%) of actin was found unpolymerized in the extracts. The amount of unassembled actin (12 microM) is accounted for by the sequestering functions of T beta 4Xen (20 microM) and profilin (5 microM), the barbed ends being capped. Movement of Listeria was not abolished by depletion of over 99% of the endogenous profilin. The proline-rich sequences of ActA are unlikely to be the target of profilin. All data support the view that actin assembly at the rear of Listeria results from a local shift in steady state due to a factor, keeping filaments uncapped, bound to the surface of the bacterium, while barbed ends are capped in the bulk cytoplasm. Movement is controlled by the energetic difference (i.e., the difference in critical concentration) between the two ends of the filaments, hence a constant ATP supply and the presence of barbed end capped F-actin in the medium are required to buffer free G-actin at a high concentration. The role of membrane components is demonstrated by the facts that: (a) Listeria movement can be reconstituted in the resuspended pellets of high speed-centrifuged extracts that are enriched in membranes; (b) Actin-based motility of endogenous vesicles, exhibiting the same rocketing movement as Listeria, can be observed in the extracts.